Benutzeranleitung / Produktwartung DM 7025 des Produzenten Mitsubishi
Zur Seite of 91
Dreambox DM 7025 Bedienungsanleitung Digitaler Satellitenempfä nger zum Empfang von fre ien und verschlüsselten DVB-Programmen mit o ptionaler digitaler Aufzeichnungsmöglic hkeit.
- 2 - U s e r M a n u a l D r e a m b o x D M 7 0 2 5 english Table of contents 1. Before initial operation of the receiver 1.1 Safety instructions ...................................................................... - 5 - 1.2 Packaging contents ...
- 3 - U s e r M a n u a l D r e a m b o x D M 7 0 2 5 english 6. Edit the channellist 6.1 Add a bouquet .......................................................................... - 29 - 6.2 Add a service to favourites .................................
- 4 - U s e r M a n u a l D r e a m b o x D M 7 0 2 5 english 11. Service searching 11.1 DVB-S Tuner configuration .................................................... - 62 - 11.1.1 Single satellite – direct connection ..............................
- 5 - U s e r M a n u a l D r e a m b o x D M 7 0 2 5 english 1. Before initial operation of the receiver 1.1 Safety instructions Please read the safety instructions completely and carefully, before using the Dreambox. The Manufacturer takes no responsibility for damages as a result of incorrect handli ng of the Dreambox.
- 6 - U s e r M a n u a l D r e a m b o x D M 7 0 2 5 english Shut down - In case your Dreambox is in use for a longer period of time disconnect the power plug from the power outlet. - During thunder storm the unit should also be physically disconnected from the power outlet.
- 7 - U s e r M a n u a l D r e a m b o x D M 7 0 2 5 english Disposal instructions The packaging of the Dreambox only consists of reusable materials. Please recycle if possible. This symbol on the product or on its packagi ng indicates that this product must not be disposed of with your other household waste.
- 8 - U s e r M a n u a l D r e a m b o x D M 7 0 2 5 english 1.2 Packaging contents Please check the completeness of the box’s contents. Included in box: Remote control Dreambox DM 7025 1 User manual (most recent version online: http://www.dream-multimedia-tv.
- 9 - U s e r M a n u a l D r e a m b o x D M 7 0 2 5 english 1.3 Views Front panel Rear panel CI-Slot Com p act Flash Slot Smartcard Reader Channel u p /down Power button LC-Display Remote control se.
- 10 - U s e r M a n u a l D r e a m b o x D M 7 0 2 5 english 1.3.1 Explanation Front Panel CI-Slot Plug in here any CI- Module of your choice. Compact Flash Slot The Compact Flash Slot is meant to hold a Compact Flash Module. The Compact Flash Module can be plugged in during regular operation.
- 11 - U s e r M a n u a l D r e a m b o x D M 7 0 2 5 english 1.3.2 Explanation rear panel Mains switch The main power switch completely cuts power from your Dreambox. Mains connection Plug the power cable into the main power socket. You must not connect the power plug to anything other than a socket that supplies 110V/60Hz or 230V/50Hz.
- 12 - U s e r M a n u a l D r e a m b o x D M 7 0 2 5 english Modem port (optional) You can optionally connect your Dreambox to your ISP via the Modem Socket using a phone line. The modem can be ordered from Dream Multimedia. Digital audio out (Toslink) You can connect your Dreambox with an optical (Toslink) cable to your HiFi-Amplifier or DSP.
- 13 - U s e r M a n u a l D r e a m b o x D M 7 0 2 5 english 1.4 Remote control SHIFT / SETUP-Button DREAM-Mode-Button Power-Button TV-Mode-Button Numeric-Keypad Arrow-Left-Button Arrow-Right-Button.
- 14 - U s e r M a n u a l D r e a m b o x D M 7 0 2 5 english Important notes about operation All functions of the Dreambox can be controlled via OSD-Menu (On-Screen-Display).
- 15 - U s e r M a n u a l D r e a m b o x D M 7 0 2 5 english Explanation remote control buttons The SHIFT/ SETUP-Button is used to preprogram the remote control to operate a TV. See chapter 14. TV-Mode setup . The Power-Button switches your Dreambox on and off.
- 16 - U s e r M a n u a l D r e a m b o x D M 7 0 2 5 english Pressing the MUTE-Button mutes the Volume. A crossed speaker symbol will appear on the TV screen. Pressing it again or pressing one of the Volume +/- Buttons brings back the audio. You can leave all menus and service lists by pressing the EXIT-Button .
- 17 - U s e r M a n u a l D r e a m b o x D M 7 0 2 5 english If you are in TV- or RADIO-Mode, pressing this button will bring up the OSD main menu. The OSD main menu has the following options: You can switch to the needed option by pressing the Navigation-Buttons up or do wn .
- 18 - U s e r M a n u a l D r e a m b o x D M 7 0 2 5 english Pressing the TV-Button activates the TV-Mode. In PVR-Mode this button is mapped with the stop function as indicated by the small square underneath it. Pressing the HELP-Button activates the Help menu.
- 19 - U s e r M a n u a l D r e a m b o x D M 7 0 2 5 english 2. Installation 2.1 Turning the device on - Place the batteries inside the battery compartment of the remote control keeping in mind the right polarity. - Before using the Dreambox, please read the safety instructions (See chapter 1.
- 20 - U s e r M a n u a l D r e a m b o x D M 7 0 2 5 english 3. Start wizard 3.1 Language selection Select your desired and language with t he Navigation-Buttons up a nd down . Press the OK- Button to activate. The start wizard takes you through the basic setup of your Dreambox.
- 21 - U s e r M a n u a l D r e a m b o x D M 7 0 2 5 english 3.2 Tuner setup Detailed information about the tuner setup can be found in chapter 11.1 DVB-S Tuner configuration 3.3 Service scan Detailed information about the service scan can be found in chapter 11.
- 22 - U s e r M a n u a l D r e a m b o x D M 7 0 2 5 english 4. Basic operation 4.1 Turning your Dreambox on and off Use the Power-Button to turn your Dreambox on and off. To put your Dreambox into Standby-Mode either press the Power-Button on your remote control or directly on your Dreambox.
- 23 - U s e r M a n u a l D r e a m b o x D M 7 0 2 5 english 4.3 Changing channel using the service list Pressing the Up/Down-Button s on your remote control activates the service list. Use the Navigation-Buttons up/do wn to select the desired service an d press the OK-Button to change to the selecte d service.
- 24 - U s e r M a n u a l D r e a m b o x D M 7 0 2 5 english 4.6 Sub Services The green dot in the Infobar appears if the selected station transmits sub services. Pressing the green Options-Button in TV or Radio mode will reveal the sub services menu.
- 25 - U s e r M a n u a l D r e a m b o x D M 7 0 2 5 english 4.9 Infobar The Infobar appears and disappears by pressing the OK-Button once, if n o OSD menu is shown on your screen or when you change channels. The Infobar shows all necessary Information about the selected service.
- 26 - U s e r M a n u a l D r e a m b o x D M 7 0 2 5 english 5. Electronic Program Guide - EPG By pressing the INFO-Button in TV-Mode you are supplied with detailed information about the curre nt show and by pressing the Right-Button afterwards about the next show.
- 27 - U s e r M a n u a l D r e a m b o x D M 7 0 2 5 english 5.2 Multi-EPG Use the blue and yellow Options-Buttons to switch between the now , next and more views. Pressing the green Options-Button will give you the possibility to automatically copy the start and end time of the selected show into a recording timer.
U s e r M a n u a l D r e a m b o x D M 7 0 2 5 english 5.2.1 Time/Date Input Press the Menu-Button in the Multi-EPG view. A A window will appear wh ere you can enter a time and date. After you have entered the desired time and date press the OK-Button to activate you selection.
- 29 - U s e r M a n u a l D r e a m b o x D M 7 0 2 5 english 6. Edit the channellist 6.1 Adding a bouquet Pressing the Up/Down-Button s on your remote control activates the service list. Press the blue Options-Button to switch to the bouquet view. By pressing the Menu-Button the "Channelli st menu" will open up.
- 30 - U s e r M a n u a l D r e a m b o x D M 7 0 2 5 english 6.2 Add a service to favourites If you want to add a service to your Favourites-view you can choose from services in the All-, Satellites- and Provider-views . You can switch views by pressing the red, green, yellow and blue Options-Buttons .
- 31 - U s e r M a n u a l D r e a m b o x D M 7 0 2 5 english 6.3 Adding multiple services to a bouquet You can select multiple services from the All-view to be added to the currently select ed bouquet. Pressing the Up/Down-Button s on your remote control activates the service list.
- 32 - U s e r M a n u a l D r e a m b o x D M 7 0 2 5 english Choose the "End bouquet edit" option. All highlighted services will now be adde d to the bouquet that you selected in the beginning. If you are only using one bouquet, which is the default setting, the selected services wil l be added to you favourites list.
- 33 - U s e r M a n u a l D r e a m b o x D M 7 0 2 5 english 6.5 Moving a service to favourites Pressing the Up/Down-Button s on your remote control activates the service list. Use the Navigation-Buttons up/do wn to select the desired service an d press the MENU-Butto n to open the “Channellist menu ”.
- 34 - U s e r M a n u a l D r e a m b o x D M 7 0 2 5 english 6.6 Adding a marker to favourites You have the option to add makers within the favourites bouquets. Pressing the Up/Down-Button s on your remote control activates the service list. Use the Bouquet +/- Buttons to switch to the desired bouquet.
- 35 - U s e r M a n u a l D r e a m b o x D M 7 0 2 5 english 7. Hard disk operation 7.1 Mounting guidelines This chapter describes how to mount a hard disk inside your Dreambox DM 7025. Please always adhere to ESD (Electrostatic Discharge) regulations when handling electronic devices.
- 36 - U s e r M a n u a l D r e a m b o x D M 7 0 2 5 english Parts list 1 Dreambox (including the 11 Phillips screws for the cover and the hard disk cage).
- 37 - U s e r M a n u a l D r e a m b o x D M 7 0 2 5 english Lift the cover on the sides on slide it backwards. Remove the 2 screws from the hard disk cage.
- 38 - U s e r M a n u a l D r e a m b o x D M 7 0 2 5 english Bend the IDE cable as shown in this picture. Now you need the Phillips screwdriver, the har d disk cage, the 4 hard disk mounting screws and your hard disk.
- 39 - U s e r M a n u a l D r e a m b o x D M 7 0 2 5 english Attach the hard disk cage to the hard disk. Pay attention to the correct mount of the hard disk in the hard disk cage. Set the jumper of the h ard disk to cable select. This information usually is printed on the hard disk.
- 40 - U s e r M a n u a l D r e a m b o x D M 7 0 2 5 english Put the hard disk cage back into the Dreambox and connect the hard disk power cord and IDE cable to the hard disk. Please be careful not to lay the power cord too close to the powersupply.
- 41 - U s e r M a n u a l D r e a m b o x D M 7 0 2 5 english 7.2 Management If no OSD menu is visible on your screen, press the Menu-Button to open the main OSD menu. Navigate to the option “Setup” and press the OK-Button to select . Navigate to the option “System” and press the OK- Button .
- 42 - U s e r M a n u a l D r e a m b o x D M 7 0 2 5 english 7.3 Recording 7.3.1 Instant recording Press the red Options-Button . You have four available options: - Add recording (ind efinitely) - A.
- 43 - U s e r M a n u a l D r e a m b o x D M 7 0 2 5 english 7.3.3 Recording by timer With the help of a timer you can record show s (if you have a hard disk installed). You are offered two different ways to program a timer, the manual way of via the EPG.
- 44 - U s e r M a n u a l D r e a m b o x D M 7 0 2 5 english Manual programming Press the green Options-Button to add a new timer. You can choose betwee n two different timer types. "Record" to record the desi red show or "Zap" to automatically switch to the service.
- 45 - U s e r M a n u a l D r e a m b o x D M 7 0 2 5 english 7.3.4 Timeshift Once you started an instant recording you can fast-forward and rewind while recording as long as you have already recorded at least 1 minute long. Press the yellow Options-Button to pause the screen (video and audio will pause).
- 46 - Red Options-Button = Rewind Green Options-Button = Play Yellow Options-Button = Pause Blue Options-Button = Forward TV - Button = S top U s e r M a n u a l D r e a m b o x D M 7 0 2 5 english In PVR-Mode the Options-Buttons are mapped as described below: Keep in mind that you have to be in the PVR-Mode to use these options.
- 47 - U s e r M a n u a l D r e a m b o x D M 7 0 2 5 english 7.5 Delete a recording Press the Video-Button to get to the selection of recordings. Use the Navigation-Buttons up and down to sele ct a recording. Press the Menu-Button . Use the Navigation-Buttons up and down to sele ct “Delete” and pre ss the OK-Button .
- 48 - U s e r M a n u a l D r e a m b o x D M 7 0 2 5 english 8. Teletext You are in the TV or Radio mode. Press the Text-Butto n to enter the teletext. Keep in mind that not every station transmits teletext! Teletext - regular navigation: If you are viewing any teletext page you can enter the interactive mode by pres sing the OK-Butto n .
- 49 - U s e r M a n u a l D r e a m b o x D M 7 0 2 5 english You have the following options: Teletext - Selection: Select the "Search" option and press the OK-Button t o start searching for teletext information on other services without having to leave the service t hat you currently are wat ching.
- 50 - U s e r M a n u a l D r e a m b o x D M 7 0 2 5 english 9. Picture-in-Picture mode (PiP) The Dreambox has a so cal led PiP-Function. With PiP you can displ ay a small TV picture ontop of the main big TV picture. Press the blue Options-Button and sel ect the "Activate Picture in Picture" option.
- 51 - U s e r M a n u a l D r e a m b o x D M 7 0 2 5 english 10. Setup 10.1 Language If no OSD menu is visible on your screen, press the Menu-Button to open the main OSD menu. Navigate to the option “Setup” and press the OK-Button to select . Navigate to the option “System” and press the OK- Button .
- 52 - U s e r M a n u a l D r e a m b o x D M 7 0 2 5 english 10.2 Customize If no OSD menu is visible on your screen, press the Menu-Button to open the main OSD menu. Navigate to the option “Setup” and press the OK-Button to select . Navigate to the option “System” and press the OK- Button .
- 53 - U s e r M a n u a l D r e a m b o x D M 7 0 2 5 english Recordings always have priority: If this option is set to “Yes” your Dreambox w ill automatically switch to the service which is supposed to be recorded incase there is a conflict with an existing timer.
- 54 - U s e r M a n u a l D r e a m b o x D M 7 0 2 5 english 10.3 Setting the time zone If no OSD menu is visible on your screen, press the Menu-Button to open the main OSD menu. Navigate to the option “Setup” and press the OK-Button to select .
- 55 - U s e r M a n u a l D r e a m b o x D M 7 0 2 5 english 10.4 A/V Settings If no OSD menu is visible on your screen, press the Menu-Button to open the main OSD menu. Navigate to the option “Setup” and press the OK-Button to select. Navigate to the option “System” and press the OK- Button .
- 56 - U s e r M a n u a l D r e a m b o x D M 7 0 2 5 english Use the Navigation-Buttons left and right to ch ange the values. Color format : CVBS (FBAS), RGB (Red, Green, Blue separated), SVideo (Co.
- 57 - U s e r M a n u a l D r e a m b o x D M 7 0 2 5 english 10.5 RF output If no OSD menu is visible on your screen, press the Menu-Button to open the main OSD menu. Navigate to the option “Setup” and press the OK-Button to select. Navigate to the option “System” and press the OK- Button .
- 58 - U s e r M a n u a l D r e a m b o x D M 7 0 2 5 english 10.6 LCD Setup If no OSD menu is visible on your screen, press the Menu-Button to open the main OSD menu. Navigate to the option “Setup” and press the OK-Button to select. Navigate to the option “System” and press the OK- Button .
- 59 - U s e r M a n u a l D r e a m b o x D M 7 0 2 5 english 10.7 Network If no OSD menu is visible on your screen, press the Menu-Button to open the main OSD menu. Navigate to the option “Setup” and press the OK-Button to select. Navigate to the option “System” and press the OK- Button .
- 60 - U s e r M a n u a l D r e a m b o x D M 7 0 2 5 english Use the Navigation-Buttons and the Numeric-Key pad to change the values. Use DHCP: If enabled your Dreambox will get its IP from a DHCP se rver. Disable this option t o set a static IP address.
- 61 - U s e r M a n u a l D r e a m b o x D M 7 0 2 5 english 10.8 Common Interface If no OSD menu is visible on your screen, press the Menu-Button to open the main OSD menu. Navigate to the option “Setup” and press the OK-Button to select. Navigate to the option “Common Interface” and press the OK-Button .
- 62 - U s e r M a n u a l D r e a m b o x D M 7 0 2 5 english 11. Service searching 11.1 DVB-S Tuner configuration If no OSD menu is visible on your screen, press the Menu-Button to open the main OSD menu. Navigate to the option “Setup” and press the OK-Button to select .
- 63 - U s e r M a n u a l D r e a m b o x D M 7 0 2 5 english 11.1.1 Single satellite – di rect connection (DVB-S) Use this type of configuration if you want to receive a single satellite with a Single Universal LNB. The coax cable is directly connected from you Dreambox to the LNB.
- 64 - U s e r M a n u a l D r e a m b o x D M 7 0 2 5 english 11.1.2 Two satel lites via Toneburst A/B (DVB-S) Use this type of configuration if you want to receive two satellites from one LNB each. It does not matter if you use one or two dishes to achieve this.
- 65 - U s e r M a n u a l D r e a m b o x D M 7 0 2 5 english 11.1.3 Two satellites vi a DiSEqC A/B (DVB-S) Use this type of configuration if you want to re ceive two satellites from one Twin Universal or Quad Universal LNB. It does not matter if you use one or two dishes to achieve this.
- 66 - U s e r M a n u a l D r e a m b o x D M 7 0 2 5 english 11.1.4 Four satellites via DiSEqC A/B/C/D (DVB-S) Use this type of configuration if you want to receive four satellites from one Single Universal or Twin Universal LNB for four or eight parties.
- 67 - U s e r M a n u a l D r e a m b o x D M 7 0 2 5 english 11.1.5 Stab Positioner using USALS (DVB-S) Use this type of configuration if you want to receive many satellites with a Stab positioner from a Single Universal LNB. The coax cable is directly connected from you Dreambox to the LNB.
- 68 - U s e r M a n u a l D r e a m b o x D M 7 0 2 5 english 11.1.6 Tuner 2 setup (DVB-S) The same setup possibilities that applied for Tuner 1 also apply for Tuner 2. There are some additional configuration options. Equal to socket A: Use this setting if Tuner 2 should use the same settin gs as Tuner 1.
- 69 - U s e r M a n u a l D r e a m b o x D M 7 0 2 5 en glish 11.2 DVB-C Tuner configuration Please read the section 11.1 DVB-S configuration to learn how to get into this menu. Use the Navigation-Buttons up and down to select the DVB-C Tuner and press the O K-Button.
- 70 - U s e r M a n u a l D r e a m b o x D M 7 0 2 5 english 11.3 DVB-T Tuner configuration Please read the section 11.1 DVB-S configuration to learn how to get into this menu. Use the Navigation-Buttons up and down to select the DVB-T Tuner and press the OK-Button .
- 71 - U s e r M a n u a l D r e a m b o x D M 7 0 2 5 english 11.4 Automatic scan If no OSD menu is visible on your screen, press the Menu-Button to open the main OSD menu. Navigate to the option “Setup” and press the OK-Button to select . Navigate to the option “Service searching” and press the OK-Button .
- 72 - U s e r M a n u a l D r e a m b o x D M 7 0 2 5 english You can see the progress o f the scan here. The scan is done once you see this m enu. It shows how many channels were foun d during the scan.
- 73 - U s e r M a n u a l D r e a m b o x D M 7 0 2 5 english 11.5 Manual scan If no OSD menu is visible on your screen, press the Menu-Button to open the main OSD menu. Navigate to the option “Setup” and press the OK-Button to select . Navigate to the option “Service searching” and press the OK-Button .
- 74 - U s e r M a n u a l D r e a m b o x D M 7 0 2 5 english 12. Systeminformation 12.1 Service If no OSD menu is visible on your screen, press the Menu-Button to open the main OSD menu. Navigate to the option “Information” and press the OK-Button to select .
- 75 - U s e r M a n u a l D r e a m b o x D M 7 0 2 5 english 12.2 About (Hard- and Software) If no OSD menu is visible on your screen, press the Menu-Button to open the main OSD menu. Navigate to the option “Information” and press the OK-Button to select .
- 76 - U s e r M a n u a l D r e a m b o x D M 7 0 2 5 english 13. Troubleshooting Problem Possible cause Solution Faulty wiring Check wiring and connections Faulty LNB Exchange LNB Wrong Tuner setting Review settings (see 11.
- 77 - U s e r M a n u a l D r e a m b o x D M 7 0 2 5 english 14. TV-Mode setup A four digit device code is selected fr om the device list and entered into the remote control. The most recent device list can be found on our website. 14.1 Programming the remote control - Press the TV-Mode-Button once.
- 78 - U s e r M a n u a l D r e a m b o x D M 7 0 2 5 english 14.2 Device list A.R. Systems 0067 0382 Accent 0067 Admiral 0117 0123 0448 0243 0294 Adyson 0247 0246 Agashi 0246 Agazi 0294 AGB 0546 Age.
- 79 - U s e r M a n u a l D r e a m b o x D M 7 0 2 5 english Domland 0424 Drean 0067 DTS 0039 Dual 0379 0247 0373 0289 0366 0549 0067 0382 0424 0429 0333 Dumont 0117 0134 0132 0243 0247 0100 0102 Du.
- 80 - U s e r M a n u a l D r e a m b o x D M 7 0 2 5 english Jea 066 JEC 065 JVC 0683 0083 0066 0401 0248 Kaisui 0248 0312 0067 0246 0485 0247 039 Kamp 0246 Kapsch 0236 0193 0391 0289 0134 Karcher 0.
- 81 - U s e r M a n u a l D r e a m b o x D M 7 0 2 5 english Pausa 0039 Perdio 0102 0350 0193 0067 Perfekt 0067 Pershin 0430 Philco 0117 0114 0104 0448 0106 0243 0277 0193 0400 0067 Philharmonic 024.
- 82 - U s e r M a n u a l D r e a m b o x D M 7 0 2 5 english Tech Line 0067 0698 Technema 0350 Technisat 0685 Tedelex 0247 Teleavia 0139 0531 0317 0226 0429 0235 0363 0520 Telecor 0067 0193 0248 024.
- 83 - U s e r M a n u a l D r e a m b o x D M 7 0 2 5 english 15. Technical data - 300 MHz MIPS Processor - Linux open source (most parts under GPL) - DVB Common-Interface Slot - 2 x Smartcard-Reader - Integrated Compact Flash Reader (Slot inside the front panel) - 10/100 Mbit Ethernet Interface - USB 1.
- 84 - U s e r M a n u a l D r e a m b o x D M 7 0 2 5 english Common-Interface: Common-Interface Power Consumption max. 0,3A/5V Video decoder: Video Compression MPEG-2 and MPEG-1 compatible Video Sta.
- 85 - U s e r M a n u a l D r e a m b o x D M 7 0 2 5 english USB: USB 1.1 connector UDMA66 IDE Interface: Internal HDD connector Compact Flash - Reader LNB power and polarization per tuner: LNB Current 500mA max.
- 86 - U s e r M a n u a l D r e a m b o x D M 7 0 2 5 english 16. Contact & support information Headquarter & Distribution: Dream-Multimedia Sales and distribution through Visoduck Discount GmbH Pierbusch 24-26 44536 Lünen Germany Dealer’s Hotline: (Dealers only) Tel.
- 87 - U s e r M a n u a l D r e a m b o x D M 7 0 2 5 english 17. Copyright notes © Dream-Multimedia 2006. All rights reserved. This product contains files that are distribut ed un der different licenses, especially a Open Source License, the GNU General Public License.
- 88 - 17.1 GNU GENERAL PUBLIC LICENSE Version 2, June 1991 Copyright ( C) 1989, 1 991 Free S oftware Foun dation, In c. 51 Franklin Street, F ifth Floor , Boston, MA 02110-13 01, USA Everyone is permitted to copy a nd distribut e verbatim copies of this lic ense docum ent, but c hanging it i s not allo wed.
- 89 - 2. You may modify your copy or copi es of the Program or any portion of it, thus forming a work based on the Program, and copy and distribute such modifications or work under the terms of Secti.
- 90 - 6. Each time you redistribute the Program (or an y work bas ed on the Program), the recipient automatic ally receives a license from the original licens or to copy, distribute or modi fy the Program subject to these terms and co nditions.
Main menu Timer VCR Scart Informa tion Games / Plugins Setup Service seraching System Common Interface Service About Standby / Reboot Tuner configuration Automatic scan Manual scan Language Customize Timezone A/V Settings RF output Harddisk LCD Setup Network Media P layer 18.
Ein wichtiger Punkt beim Kauf des Geräts Mitsubishi DM 7025 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Mitsubishi DM 7025 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Mitsubishi DM 7025 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Mitsubishi DM 7025 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Mitsubishi DM 7025 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Mitsubishi DM 7025 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Mitsubishi DM 7025 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Mitsubishi DM 7025. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Mitsubishi DM 7025 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
