Benutzeranleitung / Produktwartung 5550 IP Console des Produzenten Mitel
Zur Seite of 84
USER GUIDE.
NOTICE The information contained in this document is believed to be accu rate in all respects but is not warranted by Mitel Networks™ C orporation (MITEL ® ). The information is subject to change without notice and should not be construed in any way as a commit ment by Mitel or any of its a ffiliates or subsidiaries.
Notices ♦ iii Notice to Canadian Customers This Class A digital app aratus complies with Canadian st andard ICES-003. Notice to U.S. Customers This equipment has been tested and fo und to comply with th e limit s for a Clas s A digital device, purs uant to P art 15 of the FCC Rules.
iv ♦ Notice s Notices These notices appea r on the product and in the technical documentatio n: Symbols These symbols appear on the pro duct: WARNING Warning indicates a poten tially hazardous situation which, if not avoided, could result in death or serious in jury.
T able of Con te n ts ♦ v T able of Contents Notice to Canadian Customers . . . . . . . . . . . . . . . . . . . . . . . . . . . iii Notice to U.S. Customers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii Notice to Customers in EU Countries .
vi ♦ T able of Content s Clear All Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Customize the Queued Calls Displays . . . . . . . . . . . . . . . . . . . . . . . . 38 Data Calls . . . . . . . . . . . . .
Getting S t arted.
2 ♦ Getting St arte d.
Getting St arted ♦ 3 Introduction The Mitel 5550 IP C onsole is an atten dant console an d administratio n application for the Mitel 3300 Integrate d Communications Platform (ICP). It feat ures a spe cialized keypad and an intuitive us er interface for smooth, ef ficient call handling.
4 ♦ Getting St arte d Console Screen The 5550 IP Console screen is divided in to six areas: Menu area – provides alte rnate way s to acces s each of the other five areas of the Console screen. Select from the drop down menus or click the icon directly above t he Console S tatus area to navigate to the display you wish to access.
Getting St arted ♦ 5 Questions about Resilient Talk State What is Resilient Talk State? Resiliency gives your network the abilit y to handle calls and provide voice mail service in the event of a 3300 ICP system failure or a network-level fa ilure.
6 ♦ Getting St arte d Console Keypad The console keyp ad is used for dialing, ca ll processing and accessing 3300 ICP features. Y ou can adjust th e slope of the keypad an d detach it from (or attach it to) the handset cradle.
Getting St arted ♦ 7 Note: Some of the features liste d above are programmed for you by default; others are optional and may not be labelled on your keyp ad firmkeys. For ke ypad progra m m i ng info rm a tion , se e Fir m key Programming o n page 42.
8 ♦ Getting St arte d Starting and Closing the Mitel 5550 IP Console The 5550 IP Console start s with the operato r status set to “Operator Absent.” T o begin receiving ca lls, you must change the status to “Operator Present.” For mor e information, see page 44.
Getting St arted ♦ 9 Adjusting the Console The consol e is designed with your comfort in mind. Y ou can ma ke adjustments to th e ringer , the languag e of text on the screen , the angle of the keyp ad, whether you want to handle calls using a handset or headset and more.
10 ♦ Gettin g St arted Handset/Headset The console keyp ad provides jacks for connecting a handset and a headset. One jack is labeled for headset use only , the other for either handset or headset use. Both jacks can be in use at the same time but when th ey are, the d ual-use jack is used fo r listening o nly .
Call Handling Basics.
12 ♦ Call Handling Basics.
Call Handling Basics ♦ 13 Handling Calls in the Queued Calls Area Y ou have access to three call-handling tools fr om the Queued Cal ls area of your console screen. Use these tools to manage queued calls: • Incoming Calls – allows yo u to selecti vely answe r calls.
14 ♦ Call Handling Basics Selecting Calls from th e Queued Calls Displays Y ou can select calls using your mouse or your keypad. 1. Access the appropriate queued calls display . 2. Double-click on a ca ll entry in the list or 3. Press th e Retrieve key , then enter the corresponding call ID digit (1-9) from the corresponding qu eued calls list.
Call Handling Basics ♦ 15 Answering Calls When a new call arrives at the console • the bell rings (if it is turned on), • the call appears in the Incoming Calls display , and • a call waiting icon ( ) appears above the sof tkey associated with the call.
16 ♦ Call Handling Basics Selectively Answering Calls T o select the call you want to answer , you can • Press a softke y (for example, [Recall] , [Dial 0] , [External] , [W A TS] , etc.
Call Handling Basics ♦ 17 Answering calls from the Incoming Calls display Y ou can use the Incoming Calls display to answer calls based e ither on call priority or caller identity . When an incoming call arrives, view the call information that appear s in the Incoming Calls display .
18 ♦ Call Handling Basics Dialing T elephone Numbers Y ou can dial an internal extension number o r the number of a telephone outside the system. Either the Source or Destination areas must be clear . T o call an extension 1. Dial the extension number from the console keyp ad.
Call Handling Basics ♦ 19 Other W ays of Dialing Y ou can use the following alternate ways of dialing a telephone number: Last Number Re dial – instead of redialing the number of the las t outside call you placed, let the syste m do it for you by dialing the Last Number Redial code ( _____ _ ).
20 ♦ Call Handling Basics T ransferring (Extending) Calls Y o u can transfer a call to an extension or an out side number . Use the T ransferre d Ca lls display to view and retrieve a transferre d call that is ringing an extension. When a transferred call is released, the call informatio n appears in the T ransferred Calls display .
Call Handling Basics ♦ 21 Introducing the Call er before Comple ting the T ransfer After your call is answered an d you’ve had the chance to speak with the person priv at ely 1. Press Release to complete the transfer or 2. Press [Source] to speak privately to the pa rty in Source ; the party in Destination is on Consultation Hold.
22 ♦ Call Handling Basics Questions about Transferring Calls What do I do if th e destination to wh ich I am tran sferring a call is not answering? • Press [S ource] to reconnect the Source call and retain the Destina tion information. This gives you more options to handle the call because softkeys such as [Redial Dest] remain on screen.
Call Handling Basics ♦ 23 Holding Calls and Retrieving Held Calls Y ou can place up to six callers on h old while you check for information or page the perso n that th e caller is requesting. When a call has been placed on hold, the held call infor mation appears in the Calls On Hold display .
24 ♦ Call Handling Basics T o annotate a call on hold Use [Hold For] to hold a call and annot ate it with called-p arty information. 1. Select the call from the appro priate Queued Calls display . 2. Click once on the desired extens ion from Busy Lamp Field list or the Phone Book.
Call Handling Basics ♦ 25 T o connect two calls on hold Be sure the Source and Destination areas are both c lea r . 1. Press Retrieve and dial the hold position numbe r of one o f th e two calls that you wish to connect or Double-click the call in the Calls on Hold display .
26 ♦ Call Handling Basics Conference Calls Up to eight parties (including yourself) may be connected to form a conference ca ll. T o set up a conference call • With the two part ies connected to the console—one in the Source area and the other in the Destination area —press [Conferenc e] .
Call Handling Basics ♦ 27 Answering Recalls If an external call transfe rred from the console to an extension is not answered w ithin a cer tain time, the call re turns to the console as a recall. The call waiting ic on ( ) appears above the [Recall] softkey , and the call appears with highest prio rity in the Incoming Calls display .
28 ♦ Call Handling Basics.
Advanced Features.
30 ♦ Advanced Features.
Advanced Features ♦ 31 Account Codes An Account Cod e is a type of passwor d for the syste m. Y ou may ne ed to enter an account code to access certa in features or to record a call on the SMDR log for billin g or accounting purposes. T o enter an Account Code 1.
32 ♦ Advanced Features Busy Lamp Field (BLF) Busy Lamp Field (BLF) is an option al featur e that allows you to monitor the sta tus of exte nsions and lines, to rap id-dial a nd tr ansfer calls to those extensions, as well as to pick up ringing extensions.
Advanced Features ♦ 33 Calling, T ransferring, and Picking Up Calls in the Busy Lamp Field T o dial an extension, use any of these methods • Select a n entry , t hen press [Call] . • Select a n entry , t hen press ENTE R on the keyboar d. • Double-click any entr y .
34 ♦ Advanced Features T o add, remove, or reposition entries in the BLF List 1. Select the entry . T o select consecutive entries, c lick the first one, press an d hold down SHIFT , and th en click the la st one. T o select non-consecutive entrie s, hold down CTRL while you click individual entries.
Advanced Features ♦ 35 Call Answering Priority The console is usually set up to an swer incoming calls on a ‘first- come, first-served’ basis. When you press the Answer key with multiple calls waiting, the call that has been w aiting longest will be answered first.
36 ♦ Advanced Features Incoming Calls Threshold / Screen Pop T o reduce call-waiting times, your system may be programmed to present incoming calls to other consol es or answering positions. If your system is programmed this way , y ou can specify the number of calls that must be incoming before the system p resent s them to your console.
Advanced Features ♦ 37 Cancel Call Forwarding Call Forwarding let s an extension user route some or all calls to other extensions. Y ou can cancel Call Forwar ding on behalf of individual extension users, or for all extensions in th e system. T o cancel all types of Call Forwarding for a single extension 1.
38 ♦ Advanced Features Customize the Queued Calls Displays Each of the Queued Calls displays present s a variety of call information for incoming , he ld, or transferred calls.
Advanced Features ♦ 39 Data Calls Y ou may be asked to connect an out side caller to a dat a connection for data communicat ion s. T o connect a caller to a modem 1. Advise caller to switch local mo dem to “Data” when they hear the high-pitched modem tone .
40 ♦ Advanced Features Day and Night Service Office telephon e systems are typically placed in Night Service afte r regular hours, or whenever the last available console is lef t unattended. Calls then ring alternate an swering point s—either designated extensions , or a nigh t bell.
Advanced Features ♦ 41 Emergency Calls This feature raises an alarm at t he co nsole whe n a n exten sion user places an emergency ca ll and identifies the extension that placed the call. With this informat ion, yo u can direct emergenc y services (fo r example, police or ambulance personne l) to the location from whi ch the call was placed.
42 ♦ Advanced Features Firmkey Programming Y ou can reprogram the top two ro ws o f ke ys o n th e conso le ke yp ad with other features or remove a feat ure from a key if the feature is unavailable. T o program features to keys 1. Choose Options on the To o l s menu.
Advanced Features ♦ 43 Message W aiting Y ou can set (activate) a message waiting indica tor on an extension , to notify the user that you have a message for hi m or her . Y ou can also check whether an exte nsion has a message waiting and clear the message wa itin g in d ica tio n.
44 ♦ Advanced Features Operator Absent/Present Status Y ou can change the Operator status to Ab sent when you plan to be away from your desk and do not want calls sent to your console. All new and waiting calls will ring another destination determined by system progra m m i ng .
Advanced Features ♦ 45 Paging If your system has paging equipmen t, you can use it to make announcement s to one or more areas or “zones.” Use the Paging Zones t able in the Reference section to reco rd the location of the p aging zones. T o make a page The Source and Destination areas of your screen must be clear .
46 ♦ Advanced Features Phone Book Use the Phone Book to search your system's telephone directory for people and extensions. Y ou can search by entering a per son's name, an extension nu m be r , a department, or a location .
Advanced Features ♦ 47 Scratch Pad The Scratch Pad is your own per sonal phone directory an d S peed Dial list. Use it to save telephone num bers for faster dialin g or to store the names and numbers of callers for futur e reference. T o enter information into the Scratch Pad Y ou can use the Scratch Pad while connected to a caller .
48 ♦ Advanced Features T runk Group Status Display T runk Group S tatus Display is an opti on al feature that lets you monitor traffic on the system. Duri ng peak tr af fic periods, some users could experience problems making exte rnal calls and may contact you to find out why .
Advanced Features ♦ 49 System Speed Call Frequently dialed te lephone numbers may be saved for you and other extension users for speed dialing. Use the t able provided in the Reference section to record the System S peed Call numbers you will most likely need.
50 ♦ Advanced Features.
Hotel/Motel Features.
52 ♦ Hotel/Motel Fe atures.
Hotel/Motel Featur es ♦ 53 Displaying and Changing Room Information Room information include s gu est name, room occup a ncy and condition status (V acant, Clean, Out of Service, etc.), outg oin g call charges and restrictions, a nd the status of message waiting, wake- up call, and other guest service s.
54 ♦ Hotel/Motel Fe atures After displaying the room information, you can... • Enter or cha nge the name of the guest and th e company or group he or she is affiliated with. T he guest’ s name can have a maxi- mum of 20 characters. • Check the guest in or out (see page 55).
Hotel/Motel Featur es ♦ 55 Changing Room Occupancy and Condition Status The room occup ancy and condition st ates are as follows: T o change a room’s occu pancy and condition status 1. Press Guest Service , or if you are already on a call to the room, press the [Guest Service] softkey .
56 ♦ Hotel/Motel Fe atures T o set, change, or cancel a wake-up time while viewing the guestroom’s information 1. For each wake -up call that you want to set up, specify the fre- quency (once or daily) and method (automatically by the system or personally by a hotel employee) of delivery .
Hotel/Motel Featur es ♦ 57 Blocking Room-to-Room Calls Call Blocking stops guests from placing calls to other rooms. Y ou can control when Clo ck Blocking t akes ef fect and the rooms af fected by it. T o control whether Call Bl ocking affects a room 1.
58 ♦ Hotel/Motel Fe atures Clearing the Message Register The message register is a record of the num ber and cost of all external calls placed from a guest room telep hone. The system uses me ter pulses received from the local tele phone comp any to calculate cost s.
Reference.
60 ♦ Reference.
Reference ♦ 61 Alarms Y our telephone system us es automatic monitori ng and fault diagnosis to check the system for faults. An alarm status appea ring in the upper-right corner of the scree n notifies you when a fault occurs. Whe n there are no fault s, this area is blank.
62 ♦ Reference Rerouted Calls Some users m ay decide to re route thei r calls to your console, or the system may be programmed to reroute cert ain types of calls or all calls made at given times to your console. The calls that are rerouted to your consol e may be one of four types: • Calls a user has forwarded (Follow Me, Busy or No Answer).
Reference ♦ 63 Class of Restriction Each extension and trunk in the system is assigned a Class of Restriction. As its name implies, a Class of Restriction (COR) may restrict an exte nsion (or a trunk) from accessing an external route at a given time.
64 ♦ Reference Feature Access Codes FEATURE CODE Account Code Access - Verifiable - Non-Verifiable Associated Dataline Access Loopback Call Hold - Retrieve - Remote - Retrieve Callback - Cancel Call.
Reference ♦ 65 Glossary Account Code A code you dial to access certain system features; to apply your Class of Service (COS) at a different extension; or to associate a caller with an SMDR record for accountin g purposes. ARS - Automatic Route Selection This is an application that h andles long distance call routing automatically .
66 ♦ Reference Circular Hunting: A new call to the H unt Group is directed to the first idle extension found af ter the extens ion, which received the last call. This provides equitable call dis tribution to all the ext en sio ns . T erminal Huntin g: Hunting takes place in the or der in which the extensions were progr ammed into the hunt group.
Reference ♦ 67 Hunt Groups Dialing a Hunt Grou p Pilot Number either from the keyp ad or through the Phone Book fe ature, connects you to the first available extension in that area. Cont act your communications dep artment for more informati on Paging Zones Use this table to r ecord the paging zones your system uses .
68 ♦ Reference System Speed Call List System Messages These messages appear in the vario us areas of your scree n. Absent Feature Disallowed for Last Attendant. Select Night Service As the last or only attendant in the grou p, you cannot place your console into absent mode.
Reference ♦ 69 Call could not be picked up. The call has been picked up by another atte nda nt, answered at the ringing extension, or the calle r ha s hung up. Call could not be recovered. The call cannot be retrieved either because it has been answered at the extension , or th e calle r ha s hu ng up .
70 ♦ Reference Completed Confirmation message wh en the number you’ve entered is valid and the action requested has been t aken. Class Restricted Y our Class of Service does not allow this featur e. Conference Indication that a conference has been set up or is on hold.
Reference ♦ 71 Guest Service Part of the Hotel/Mot el Fe at ur e package. This pr om p t ap pea rs in several atte ndant mode o perations. Pr essing it place s the console in Guest Service mode immediately . Headset or handset require d for attendant operation Plug in your headset or handset.
72 ♦ Reference Monitor Busy The extension you are trying to mo nitor is already being monitored from another st ation. MSG W aiting After pressin g the [Check MSG W aiting] sof tkey , this indicates that the extension has messa ge(s) waiting.
Reference ♦ 73 Press “Y es” to Confirm Request or “No” to Quit Press the appr opriate soft key . Recall A previously extended call has returned to your console a fter a time- out period. Recall – Busy A previously extended call has r eturned to your co nsole because the extension is busy .
74 ♦ Reference Serial - No Answer The Serial call has returned to your console beca use the destination did not answer before a pr ed etermined period of time. Serial - Recall The Serial call you made was successful. Set MSG waiting for Station # : Enter the number of the extension on which you wish to set a Message W aiting notification.
Reference ♦ 75 Unassigned Directory Number The number you dialed is not reco gnized by the telephon e system. V er ify your num ber and t ry again. W ake-up Call Not Acknowledged Part of the Ho tel/Motel Feat ure package. Th e guest has not answered the automatic wake-up.
76 ♦ Reference Tr u n k N u m b e r s Use this table to r ecord the trunk numbers you r system uses. Contact your communications dep artment for more informatio n about the trunk numbers.
Index ♦ 77 Index A Answer calls 11 Answering priority, changing 35 Application area 4 Associated data line 39 B BLF 32 Bulletin Board 31 Busy Lamp Field 32 Busy number, transfer to 20 C Call Answer .
78 ♦ Index Volume, adjusting 9 Headset Enabling 9 Volume, adjusting 9 Hold, place call on 23 Hunt Groups 67 K Keypad, console 6 L Language, chang ing on console 10 M Message Register, clearing fo r .
Ein wichtiger Punkt beim Kauf des Geräts Mitel 5550 IP Console (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Mitel 5550 IP Console noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Mitel 5550 IP Console - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Mitel 5550 IP Console reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Mitel 5550 IP Console erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Mitel 5550 IP Console besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Mitel 5550 IP Console verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Mitel 5550 IP Console. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Mitel 5550 IP Console gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
