Benutzeranleitung / Produktwartung 4015 des Produzenten Mitel
Zur Seite of 26
User Guide.
Notice The information contained in this document is believed to be accurate in all respects but is not warranted by Mitel Networks® Corporation. The information is subject to change without notice and should not be construed in any way as a commitment by Mite l Networks or any of its affiliates or subsidiaries.
-i- Contents ABOUT YOUR PHONE 1 TIPS FOR YOUR COMFORT AND SAFETY 2 Don't cradle the handset! 2 Protect your hearing 2 Adjusting the viewing angle 2 Changing Handsets 4 CUSTOMIZING YOUR PHONE 4 Ri.
-ii- CALL HANDLING 9 Hold 9 Transfer 9 Conference 10 Conference Split 10 Swap 10 Call Forward 11 Call Forward - I Am Here 12 Call Forward - End Chaining 13 Call Forward - Override 13 Messaging - Advis.
-1- ABOUT YOUR PHONE The SUPERSET 4015 has eigh t fixed-function keys ( SUPERKEY, MESSAGE, HOLD, CANCEL, TRANSFER/CONFERENCE , REDIAL, , ) a n d s e v e n personal keys with built-in statu s indi cators.
-2- TIPS FOR YOUR COMFORT AND SAFETY Don't cradle the handset! Prolon g ed use of the handset can lead to neck, shoulder, or back discomfort, especially if you cradle the handset between your ear and shoulder. If you use your phone a lot, you may find it mo re comfortable to use a heads et.
-3-.
-4- Changing Handsets Your SUPERSET 4015 tele phone is compat ible with several specialty handsets. To remove the handset ship ped with your set from the handset cord: 1. Bend a paper clip to produce approx imately 4 cm (1.5 in.) of straight wire. 2. On the handset, locate the plastic groove leading into the handset jack.
-5- Handset Receiver Volume Control To adjust the Handset Receiver Volume when you are using the handset: z Press or . Speaker Volume Control To adjust the Speaker Volume when making an on-hook call or when listening to background music: z Press or . Display Contrast Control To adjust the Display Contrast while your set is idle: z Press or .
-6- MAKING AND ANSWERING CALLS Make a call 1. Lift the handset. 2. If you want to use a Non-Prime Li ne, press a Line Ap pearance key. 3. Dial the number, - OR - Press a Speed Call key - OR - Press REDIAL . Answer a call z Lift the handset. - OR - Press the flashing Line appe ar ance key and lift the handset.
-7- Speed Call Keys You may use Speed Call Keys to make a call or to send a string of digits during a call (press a Speed Call Key during a call to send a multi-digit password, for instance). To dial a stored Speed Call number: 1. Lift the handset. 2.
-8- Speed Call - Personal To dial a stored person al Speed Call number: 1. Lift the handset. 2. Dial 58 . 3. Enter an index number between 00 and 09 . To store a personal Speed Call number: 1. Lift the handset. 2. Dial 67 . 3. Enter an index number between 00 and 09 .
-9- CALL HANDLING Hold To place a call on Hold: z Press Hold . To retrieve a call from Hold: 1. Lift the handset. 2. Press the flashing line key. To retrieve a call from Ho ld at another station: z Press the flashing line key. - OR - Dial **1 and the number of the station that placed the call on Hold.
-10- Conference To form a Conference when a two-party call is al rea dy in place, or to add another party to an existing Conference: 1. Press TRANS/CONF . 2. Dial the number of the next party. 3. Wait for an answer. 4. Press TRANS/CONF . To leave a Conference: z Hang up.
-11- Call Forward Call Forward lets you redirect incoming calls to an alternate number. Always redirects all incoming calls regardless of the state of your telephone. B-Int redirects internal calls when your telephone is busy, and B-Ext redirects external calls when your telephone is busy.
-12- Call Forward - I Am Here To forward calls from a remote st ation to your current location: 1. Press SUPERKEY . 2. Press # until "Call Forwarding?" appears. 3. Press * . 4. Press # until "I'm Here?" appears. 5. Press * . 6.
-13- Call Forward - End Chaining To ensure that calls do not get fo rwarded again by the destination number: 1. Lift the handset. 2. Dial 64 . 3. Hang up. To again allow calls to be forwarded by the destination number: 1. Lift the handset. 2. Dial **73 .
-14- Messaging - Callback To leave a Callback Message on a te lephone when you hear busy or ringback tone: z Press MESSAGE . To respond to a message waiting condition on your telephone: 1. Press MESSAGE . 2. Do one of the following: To call the message sender, press # .
-15- Callback To request a Callback when you reac h a busy or unanswered station: z Press the Callback feature key. To answer a Callback: z Lift the handset. To cancel a Callback: 1. Lift the handset. 2. Dial *1# . 3. Dial the number of the called station.
-16- Campon To Campon to a busy station: z Press the Wait feature key. To retrieve a call when you hear Campon tone: z Press the Trade feature key. Do Not Disturb To activate or deactivate Do Not Disturb: z Press the Do Not Disturb feature key. To activate Do Not Disturb from a remote station: 1.
-17- Direct Paging Direct Paging allows you to page a pa rty through their tele phone speaker. If the paged party has Off-Hook Voice An nounce enabled, the page will be heard even when the party is on a handset or headset call. To page a party: 1. Lift the handset.
-18- Headset Operation (with Feature Control Switch) IMPORTANT NOTE: Mitel Networks Headsets wi th Feature Control Switch (PN9132-800-500-NA/9132-800- 501-NA) must be insta lled in the dedicated headset jack (the jack nearest the fron t of the set). Installation will disable your handset microphone.
-19- Group Paging / Meet Me Answer Group Paging allows you to page a group of telephones through their built-in speakers. You can belong to to as many as three paging groups with one group designated as your "prime" group.
-20- USING MLPP Multi-Level Precedence and Preemption (MLPP) facilitates emergency communications for the military. MLPP enables au thorized users to specify a precedence level when making a call, and to preempt calls with a lower precedence level. To make a precedence call: 1.
-21- To answer a precedence call: If your telephone is idle and you re ceive a call with a precedence level hi g he r than routine, you will hear the MLPP precedence ring . If your telephone has a display, it will indicate the pr ecedence level of the incoming call.
-22- FEATURE ACCESS CODES Save Last Number **79 Repeat Last Number Saved *6* Personal Speedcall - Invoke 58 Personal Speed Call - Upper Range Index Number 09 Personal Speedcall - Store 67 Call Hold - .
Ein wichtiger Punkt beim Kauf des Geräts Mitel 4015 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Mitel 4015 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Mitel 4015 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Mitel 4015 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Mitel 4015 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Mitel 4015 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Mitel 4015 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Mitel 4015. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Mitel 4015 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
