Benutzeranleitung / Produktwartung CF2002 des Produzenten Minolta
Zur Seite of 51
4581-7 777-01 © MINOL T A CO ., L TD . Printe d in Japan SETUP INSTR UC TIONS PRINTER P ANEL 1 CF2002/CF3102 Pr inter W ARNING • Do not plug i n the power cord or tu r n on thi s unit unti l you are instr ucted to a ccordin g to this ma nual.
Printer Panel 1 – 1 – 4581- 7777-01 1. Outline of the C F2002/CF31 02 Syste m Setup These Se tup Instr uctions de scribe the setup for the par ts marked in grey in the flowcha r t shown below . When se tting up a sy stem co nsisting o f the pr inter a nd its vario us options, per form the setup accor ding to the proce dure descr ibed below .
Printer Panel 1 – 2 – 4581- 7777-01 1.1 Precautions Co ncerning the P ackage Cont ents (Manuals) The following m anuals for the produ cts list ed below ar e include d.
Printer Panel 1 – 3 – 4581- 7777-01 2. Unpacking 2.1 Unpac king the Accessories Remove the accessor ies fro m the box, an d then che ck that the following are e nclosed. (1) Imag ing units .................. ........... ............... ...........
Printer Panel 1 – 4 – 4581- 7777-01 2.3 Remo ving the Pro tective T ape and P acking Materials 1. Remove the tape af fixed to the outs ide sur - face of the pr inter.
Printer Panel 1 – 5 – 4581- 7777-01 3. Installin g the U nit 3.1 Installing th e Imaging Unit 1. Open the fr ont do or . 2. Pinch the Imaging Unit release lev er fo r Y el- low and pull it down fo rward. C4004U047A A 3. Slide out th e prot ective materi al.
Printer Panel 1 – 6 – 4581- 7777-01 9. K e eping the Im aging U nit in th e lev el posi- tion, inser t the Imaging Unit into the mount- ing po sition on t he pri nter until its leadin g edge i s stopped.
Printer Panel 1 – 7 – 4581- 7777-01 3.2 Installing th e T oner Cartridg e and the Filter NOT E T one r does not co me with th e pri nter . Purchase toner car tr idges ( of different color s) sep- arately available.
Printer Panel 1 – 8 – 4581- 7777-01 4. Affixing the Label 5. Installing the Manual Holder Label 1. A ffi x the l abel on the right side of the top of the fron t door. NOT E Affix the label that co rrespond s with the installed options. C4004U589A A 1.
Printer Panel 1 – 9 – 4581- 7777-01 6. Con necti ng the C ab les 1. Make sure that the prin ter power cord is not plugg ed into th e electr ical o utlet, a nd then inser t the plug on the en d of the power cord into t he power cord co nnector on the pr inte r .
Printer Panel 1 – 10 – 4581- 7777-01 7. C alibrating the Pr inter 7.1 Loading T est P aper Load test patter n pap er tha t can be u sed with X -Rite ca libration. 7.2 Setting Up the Serv icing Equipme nt Set up the equip ment in orde r to pri nt a test patt er n and make the ne cessar y adjus tments.
Printer Panel 1 – 11 – 4581- 7777-01 7.3 Setting Up the Selector NOT E Prepa re alumi num tape be fore beginning the setup. 7.4 Connecting the Equipm ent Cables 1. Re move the selector fro m its box. C4004U601A A 2. Re move the two screws from the selector, and the n remove the up per cover .
Printer Panel 1 – 12 – 4581- 7777-01 7.5 X-Rite Calibration NOT E • Sta r t up the E xternal P anel Cont rolle r on the N otebo ok PC bef ore tu r ning on the pri nter . • If an err or mes sage appe ars, follow the instr uctions des cribe d in the message.
Printer Panel 1 – 13 – 4581- 7777-01 T est patte rns 6. C heck the messag e that ap pears, and the n click the Start key in the External P anel Con- troller . T est patter ns are pr inted for the f our c olors. (Cyan, Magen ta, Y el low , Black) NOT E • It will take approximately 2 minutes for the test pa tter ns to be pr inted.
Printer Panel 1 – 14 – 4581- 7777-01 12. If the re ading was com pleted c orrectly , the dialog box shown at the le ft appear s. Prepa re the cyan test pattern .
Printer Panel 1 – 15 – 4581- 7777-01 1 2 3 4 A B C D 17. T urn the cyan tes t patter n to its orig inal or i- entation , set the X-Rite gu ide to “ 30 ” , and then feed the patte rn in direc tion “ 3 ” to read the row rep resente d by “ C ” .
Printer Panel 1 – 16 – 4581- 7777-01 23. P repare the yellow te st patter n, and the n repeat ste ps 13 thro ugh 20 of the ab ov e pro- cedure to read t he yellow test patter n wit h the X-Rite.
Printer Panel 1 – 17 – 4581- 7777-01 8. Makin g System Setting 8.1 Chec k ing the Date Setting 1. C heck that t he Exter nal P a nel C ontrolle r appears in the c ompute r scree n. C4581P003C A 2. Click [Utility]. 3. Click [User ’ s Choice: 1] .
Printer Panel 1 – 18 – 4581- 7777-01 8.2 Specifying th e Serial Number NOT E Be sur e to specify th e seria l number. When the serial number i s specified, the settings for each unit can be read b y the printe r . If the serial numb er is not specifie d, a correc tly adjusted im age cannot be print ed.
Printer Panel 1 – 19 – 4581- 7777-01 8.3 Specifying W ho P erforms Replac ements NOT E The me ssage t hat appe ars a u nit must be replace d can be change d to in dicate t hat either the user o r the ser vice repre sentative must per form the re placeme nt.
Printer Panel 1 – 20 – 4581- 7777-01 8.4 Printing the Lis t 6. Chec k th at the External P anel Con troll er ap pears in t he co mpute r scr een, a nd the n dis pla y the T ech. Rep . Mode scr een. (F or det ail s abo ut di spl a ying th e T ech. R ep .
Printer Panel 1 – 21 – 4581- 7777-01 8.5 T o set the Ener gy Save Mode par ameter NOT E When making se ttings according to th e customer ’ s req uests, refer to the procedur e descri bed below . 1. Check that the E xter nal Panel Contr oller appea rs in th e compute r screen.
Printer Panel 1 – 22 – 4581- 7777-01 8.6 T o set the Sleep Mode parameter NOT E When making se ttings according to th e customer ’ s req uests, refer to the procedur e descri bed below . 1. Check that the E xter nal Panel Contr oller appea rs in th e compute r screen.
Printer Panel 1 – 23 – 4581- 7777-01 4. S elect [2/2 ]. 5. Click [Sleep] C4581P011C A C4581P013C A 6. U sing th e keypad in the Exter nal Panel Contr oller , enter the desired number of minutes, and t hen cli ck [Enter]. NOT E Select t he [C] (Cl ear) key to erase th e entered number.
Printer Panel 1 – 24 – 4581- 7777-01 9. Loading P aper NOT E For more det ails ab out loa ding paper, refer to the User Ma nual. 9.1 T ray 1 1. P repare paper that me ets this pr oduct ’ s specifications. 2. P ull out the pa per drawer for T ray 1.
Printer Panel 1 – 25 – 4581- 7777-01 9.2 T ray 2 1. P repare paper that me ets this pr oduct ’ s specifications. 2. P ull out the pa per drawer for T ray 2. C4004U076A A 3. P ress down o n the paper -lifting pl ate unti l it locks into place. C4004U077A A 4.
Printer Panel 1 – 26 – 4581- 7777-01 P aper si ze label Drawer number labe l 9. A ffix th e encl osed pap er size la bel to T ray 2 as shown. 10. A ffix the enclosed drawer number labe l as shown.
Printer Panel 1 – 27 – 4581- 7777-01 10. A djusting the Options NOT E • With the p rint er , th e adjust ments o f each option are pe rf or med w ith the ser vicing equipm ent. The refore, star t up the Exter n al Panel Contro ller , and m ake the adju st- ments with the app ropri ate setting.
Printer Panel 1 – 28 – 4581- 7777-01 7. M easure marg in a from the edge o f the paper to the patter n pr inted in the test page, and then check that the width of t he mea - sured m argin m eets its stan dard wid th. Standa rd width of the margin (a): 3.
Printer Panel 1 – 29 – 4581- 7777-01 10.2 Chec king and Adjusting the Pa per Ref erence P osition for PF-121 NOT E • F or details on the installing PF-121, refer to its Setup Instr uctions. • T o ad just PF-1 21, follow the instr uctions below .
Printer Panel 1 – 30 – 4581- 7777-01 10.3 Chec king and Adjusting the Pa per Ref erence P osition for AD-14 NOT E • P e rf or m the pr ocedur e below after ad justing th e paper reference p ositions for the paper feed unit and the large-cap acity cab inet.
Printer Panel 1 – 31 – 4581- 7777-01 A 8. M easure the width of loss for the test patter n pri nted on t he back of th e test pag e. NOT E Do not measure f rom the ba ck of the t est pat- ter n.
Printer Panel 1 – 32 – 4581- 7777-01 11. Prepari ng for Installa tion of the Co ntroller Bef ore installing the co ntroller , make the followin g settings. ■ ■ ■ ■ Selecting the “Printer” Setting Use the Exter nal Panel Cont roller to chang e the “P rior ity Device” settin g to “ Printe r”.
Printer Panel 1 – 33 – 4581- 7777-01 12. Installin g the Prin ter Panel 12.1 Checki ng th e Con tents of t he Pri nte r Panel Before star tin g to set up, check that th e following accessor ies are included with this unit. (1) Pr inter pa nel ....
Printer Panel 1 – 34 – 4581- 7777-01 4. P ull out the con troller connector. C4004U239A A 5. R emove the connecto r cover shown in the illustration. C4581U004A A 6. Pass the con troller co nnector pulle d out in step 5 th rough the hole a s shown.
Printer Panel 1 – 35 – 4581- 7777-01 10. S ecure the prin ter pa nel for the inter nal con- troller with t he screw us ed to secure th e cover . C4581U009A A 11.
Printer Panel 1 – 36 – 4581- 7777-01 13. Installin g the Print er Controller 13.1 Operat ing En vironmen t The pr inter controll er operat es unde r the f ollowing e nvironment. PCL dr iver (only for the Windows operating system) and PS dr iver are av ailable.
Printer Panel 1 – 37 – 4581- 7777-01 13.3 Chec king the Contents o f the Enc losed Inter face K it Before star tin g to set up, check that th e following accessor ies are included with this unit. 1. Co ntroller mo unting plate ................ ...
Printer Panel 1 – 38 – 4581- 7777-01 3. S ecure t he IEEE128 4 connector to the con- troller mounting pl ate using the two screw s enclos ed with th e cont roller cir cuit boa rd.
Printer Panel 1 – 39 – 4581- 7777-01 8. H ook the two tabs at the back of the interface k it into t he notche s on t he back of the printe r . C4025u917 AA 9. S ecure th e inter f ace kit with the two screw s (7) for installing the cont roller. C4025u918AA 10.
Printer Panel 1 – 40 – 4581- 7777-01 13. At tach a CKN clamp at the l ow er-l eft c orner of th e bac k of th e print er , and t hen p ass the pr inter cable thou gh the cla mp. Attach a CKN clamp to the r ight side of the inter- face kit, and t hen pass th e power cord through the clam p.
Printer Panel 1 – 41 – 4581- 7777-01 14. Spec ifying the Printer Controller Settin gs F r om the pr inte r , spe cify the necessar y se ttings for using the contro ller . 3. A fter several minutes, a print er pan el for selecting the langua ge appear s.
Printer Panel 1 – 42 – 4581- 7777-01 15. C hecking With a T est Print After settin g up the con troller, print the Configu ration pag e to check that the control ler is operating correctly . 16. Connecting the Cab les Use t he IE EE128 4 (Cen tron ics), or netwo rk cabl e (Cat egory 5 or 5E).
Printer Panel 1 – 43 – 4581- 7777-01 17. Installin g the Patch Files ■ ■ ■ ■ Object ive The control ler is recog nized as Mino lta prin ter in a networ k manageme nt tool (EX. P age Scope Net Ca re) at the time of use. In add ition, the Minolta logo appea rs at the top of the PageScope Light page.
Printer Panel 1 – 44 – 4581- 7777-01 18. T o turn off t he prin ter controller NOT E If t he pri nter control ler is turned o ff in a mann er oth er th an de scribed in “ T o turn off the printer c ontroller ” , the controll er ma y be damag ed.
Printer Panel 1 – 45 – 4581- 7777-01 19. Settin g the Use r En vironment (Ad ministrat or Opera- tions v olume) The follo win g procedures a re basically for administrators. Refer to the follo wing only if a request for setup is received from the user .
Printer Panel 1 – 46 – 4581- 7777-01 19.3 Common Setti ngs fo r Contr ollers (The r ecommend ed settin gs are und erlin ed and the s ettings w ithin [ ] are the default s et- tings.
Printer Panel 1 – 47 – 4581- 7777-01 19.5 Specifying th e Settings Nec essary fo r Printing on a Net- wo r k The following proc edure de scrib es how to specif y the settin gs necessar y f or pr inting on a network. F ollow the p rocedu re descr ibed below to spe cify the s ettings nece ssar y for print ing on a network.
Printer Panel 1 – 48 – 4581- 7777-01 ■ ■ ■ ■ LPD (LPR) printin g Cont rol ler s etting s (The reco mmen ded settings a re und erlin ed and the settings w ithin [ ] are the de fault set- tings.) PC Settings F or Wi ndows NT 4.0: 1. In stall the Microsoft TC P/IP Prin ting ser vice.
Printer Panel 1 – 49 – 4581- 7777-01 ■ ■ ■ ■ Netw ork Printing on a Maci ntosh Computer AppleT alk printing Cont rol ler s etting s (The reco mmen ded settings a re und erlin ed and the settings w ithin [ ] are the de fault set- tings.) Settings for a M acintosh com puter 1.
Printer Panel 1 – 50 – 4581- 7777-01 20. Checking Operat ion After Spec ifying Setting s After th e setup pr ocedures for the controll er and user environme nt are fi nished, check the operation to ensure that t he setup h as been pe rforme d correctl y .
Ein wichtiger Punkt beim Kauf des Geräts Minolta CF2002 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Minolta CF2002 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Minolta CF2002 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Minolta CF2002 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Minolta CF2002 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Minolta CF2002 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Minolta CF2002 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Minolta CF2002. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Minolta CF2002 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
