Benutzeranleitung / Produktwartung Countryman (2014) des Produzenten Mini
Zur Seite of 218
Owner's Manual. MINI Countryman. MINI Paceman. Contents A-Z Online Edition for Part no. 01 40 2 911 521 - VI/13.
.
COOPER COOPER S JOHN COOPER WORKS Owner's Manual for Vehicle Thank you for choosing a MINI. The more familiar you are with your vehicle, the better control you will have on the road. We therefore strongly suggest: Read this Owner's Manual before starting off in your new MINI.
© 2013 Bayerische Motoren Werke Aktiengesellschaft Munich, Germany Reprinting, including excerpts, only with the written consent of BMW AG, Munich. US English VI/13, 07 13 500 Printed on environmentally friendly paper, bleached without chlorine, suitable for recycling.
Contents The fastest way to find information on a partic‐ ular topic or item is by using the index, refer to page 208 . 6 Notes At a glance 14 Cockpit Controls 22 Opening and closing 36 Adjusting 44.
Notes Using this Owner's Manual The fastest way to find information on a partic‐ ular topic is by using the index. An initial overview of the vehicle is provided in the first chapter. Additional sources of information Should you have any questions, your service center will be glad to advise you at any time.
For your own safety Warranty Your vehicle is technically configured for the operating conditions and registration require‐ ments applying in the country of first delivery — homologation.
your skin by washing thoroughly with soap and water. Service and warranty We recommend that you read this publication thoroughly. Your vehicle is covered by the fol‐ lowing warranties: ▷ New Vehicle Limited Warranty. ▷ Rust Perforation Limited Warranty.
Situations are conceivable during the use of the vehicle in which these technical data could be‐ come associated with a specific person in com‐ bination with other information, such as an ac‐ cident report, damage to the vehicle, witness accounts, etc.
the toll-free hotline 1-800-333-0510. You can also obtain other information about motor ve‐ hicle safety from http://www.tc.gc.ca/roadsaf‐ ety. Seite 10 Notes 10 Online Edition for Part no.
Seite 11 Notes 11 Online Edition for Part no. 01 40 2 911 521 - VI/13.
WATCH ME. Online Edition for Part no. 01 40 2 911 521 - VI/13.
At a glance Controls Driving tips Entertainment Communication Mobility Reference Online Edition for Part no. 01 40 2 911 521 - VI/13.
Cockpit Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version.
Roadside parking lamps 68 Computer 60 3 Tachometer 60 Instrument lighting 70 Resetting the trip odometer 59 4 Washer/wiper system 53 5 Start/stop the engine and swi.
Displays 1 Tachometer 60 with indicator and warning lamps 17 2 Display for ▷ Current speed 59 ▷ Indicator/warning lamps 17 3 Resetting the trip odometer 59 4 Display .
Indicator/warning lamps The concept The indicator and warning lamps can light up in a variety of combinations and colors in display area 1 or 2. Several of the lamps are checked for proper functioning when the engine is started or the ignition is switched on, and light up briefly.
Seat heating 38 Central locking, inside 27 Front fog lamps 70 Sport button 83 Driving stability control systems DSC Dynamic Stability Con‐ trol 81 DTC Dynamic Traction .
Seite 19 Cockpit At a glance 19 Online Edition for Part no. 01 40 2 911 521 - VI/13.
HANDLE ME. Online Edition for Part no. 01 40 2 911 521 - VI/13.
At a glance Controls Driving tips Entertainment Communication Mobility Reference Online Edition for Part no. 01 40 2 911 521 - VI/13.
Opening and closing Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version.
stored with it are called up and imple‐ mented. ▷ Your personal settings will be recognized and called up again even if the vehicle has been used in the meantime by someone else with another remote control. ▷ The individual settings are stored for no more than three remote controls.
The hazard warning system and interior lamps come on. Opening and closing: from the outside Using the remote control General information Take the remote control with you People or animals left unattended in a parked vehicle can lock the doors from the in‐ side.
Convenient opening Press and hold the button on the re‐ mote control. The power windows are opened and the glass sunroof is raised. Convenient closing with the remote control is not possible.
The function is deactivated. 9. Press and hold the button until the display changes. The setting is stored. Switching on the interior lamps When the vehicle is locked: Press the button. You can also use this function to locate your ve‐ hicle in parking garages, etc.
▷ Press down the lock button of the front passenger door and close the door from the outside. Convenient opening and closing In vehicles with an alarm system or Comfort Ac‐ cess, the windows and the glass sunroof can be operated via the door lock.
Automatic locking In addition, it is possible to set the situations in which the vehicle locks. The setting is stored for the remote control in use. 1. Switch on the ignition, refer to page 49 . 2. Press the button on the turn indicator lever repeatedly until "SET/INFO" is displayed.
Opening from the inside Press the button on the driver's footwell. MINI Countryman Press the top half of the MINI emblem, arrow, or Press the button on the remote control for approx. 1 second and release. The tailgate is unlocked. MINI Paceman Press the top half of the MINI emblem, arrow, or Press the button on the remote control for approx.
MINI Paceman Recessed grips on the inside trim of the tailgate can be used to conveniently pull down the tail‐ gate. Comfort Access The concept The vehicle can be accessed without activating the remote control. All you need to do is to have the remote control with you, e.
If a remote control accidentally left in the cargo area is detected in the locked vehicle after the tailgate is closed, the tailgate opens again slightly.
Replacing the battery The remote control for Comfort Access contains a battery that will need to be replaced from time to time. 1. Remove the cover. 2. Insert a new battery with the positive side facing upwards. 3. Press the cover closed. Return used battery to a recycling center or to your service center.
Convenient operation via: ▷ Door lock, refer to page 26 ▷ Comfort Access, refer to page 30 Tilting the glass sunroof MINI Countryman: ▷ Press the switch back to the resistance point and hold. Both glass sunroofs are raised. Releasing stops the motion.
Take the remote control with you Take the remote control with you when leaving the vehicle so that children, for exam‐ ple, cannot operate the power windows and in‐ jure themselves. ◀ If, after having been opened and closed a num‐ ber of times in close succession, a window can only be closed, the system is overheated.
Danger of pinching even with pinch pro‐ tection Even with the pinch protection system, check that the window's closing path is clear; other‐ wise, the closing action may not stop in certain situations, e.
Adjusting Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version.
Pull the lever, arrow 1, and apply your weight to the backrest or lift it off, as necessary. MINI Paceman Pull the lever, arrow 1, and apply your weight to the backrest or lift it off, as necessary, ar‐ rows 2. Lumbar support You can also adjust the contour of the backrest to obtain additional support in the lumbar re‐ gion.
MINI Paceman: entry in the rear 1. Pull the lever on the back of the seat up‐ ward, arrow 1. The backrest folds forward. 2. Push against the backrest to move the seat forward, arrow 2. To make it easier to enter the car in the rear, push back the safety belt on the lower belt guide rail if necessary.
The shoulder strap's anchorage point will be correct for adult seat occupants of every build if the seat is correctly adjusted. One person per safety belt Never allow more than one person to wear a single safety belt. Never allow infants or small children to ride on a passenger's lap.
1 Opening for the safety belt 2 Holder for the small buckle tongue Take the small buckle tongue out of the holder. Move both buckle tongues downward. Closing Insert the small buckle tongue 2 of the safety belt into the small belt buckle 3. Opening Press the red button on the small belt buckle 3 with buckle tongue 1.
Safety belt reminder for driver's seat and front passenger seat The indicator lamps light up and a sig‐ nal sounds. Check whether the safety belt has been fastened correctly.
Rear 1. Pull upward as far as possible. 2. Fold the backrest forward slightly. 3. Press button 1 and pull out the head re‐ straint all the way to the stop. 4. Press the additional button 2 using a suita‐ ble tool. 5. Pull out the head restraint completely.
Interior rearview mirror To reduce the blinding effect from the rear when driving at night: turn the knob. Interior rearview and exterior mirrors, automatic dimming feature Two photocells are used for control: ▷ In the mirror frame, see arrow. ▷ On the back of the mirror.
Transporting children safely Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version.
Notes Manufacturer's information for child re‐ straint fixing systems To select, mount and use child restraint fixing systems, observe the information provided by the system manufacturer; otherwise, the pro‐ tective effect can be impaired.
Notes Manufacturer's information for LATCH child restraint fixing systems To mount and use the LATCH child restraint fix‐ ing systems, observe the operating and safety information from the system manufacturer; otherwise, the level of protection may be re‐ duced.
MINI Countryman There are two additional mounting points for child restraint fixing systems with an upper re‐ taining strap, arrows. MINI Paceman There are two additional mounting points for child restraint fixing systems with an upper re‐ taining strap, arrows.
Attaching the upper retaining strap to the mounting point 1. Slide the head restraint upward. 2. Center seat: fold the cargo area floor for‐ ward. 3. Guide the upper retaining strap between the supports of the head restraint. 4. Attach the upper retaining strap to the mounting point with the hook.
Driving Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version.
To save battery power when the engine is off, switch off the ignition and any unnecessary electronic systems/power consumers. Radio ready state and ignition off All indicator and warning lamps in the displays go out. The ignition switches off automatically when the driver's door is opened.
Engine stop General information Take the remote control with you Take the remote control with you when leaving the vehicle so that children, for exam‐ ple, cannot operate the windows and injure themselves. ◀ Set the handbrake and further secure the vehicle as required Set the handbrake firmly when parking; other‐ wise, the vehicle may roll.
Turn signal, high beams, headlamp flasher 1 Turn signal 2 Switching on the high beams 3 Switching off the high beams/headlamp flasher Turn signal Press the lever beyond the resistance point. To switch off manually, press the lever to the resistance point.
▷ Turn signal flashes once. ▷ Triple turn signal. 9. Press and hold the button until the display changes. The setting is stored for the remote control cur‐ rently in use.
Activating intermittent wipe or rain sensor Press the button, arrow 3. The symbol is shown in the tachometer. Setting the sensitivity of the rain sensor 1. Switch on the ignition, refer to page 49 . 2. Press the button on the turn indicator lever repeatedly until "SET/INFO" is displayed.
Do not use the washing facilities when the hood is open Only use the washing facilities when the hood is fully locked; otherwise, the headlamp washer system may become damaged. ◀ Windshield washer nozzles The windshield washer nozzles are heated au‐ tomatically while the engine is running or the ignition is switched on.
All washer nozzles are supplied from one reser‐ voir. The recommended minimum filling quantity is 0.2 US gal/1 liter. Fill with a mixture of window washing concen‐ trate and water; if needed, add antifreeze ac‐ cording to the manufacturer instructions.
Changing selector lever positions ▷ With the ignition switched on or the engine running, the selector lever can be moved out of position P. ▷ When the vehicle is stationary, step on the brake before shifting out of P or N; other‐ wise, the selector lever is locked: shiftlock.
The vehicle only shifts up or down at appropri‐ ate engine and road speeds, e.g., it does not shift down if the engine speed is too high. The selected gear is briefly displayed in the instru‐ ment panel, followed by the current gear.
Displays Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version.
Tachometer It is imperative that you avoid engine speeds in the red warning field. In this range, the fuel supply is interrupted to protect the engine. Coolant temperature A warning lamp will come on if the coolant, and therefore the engine, becomes too hot.
Information in detail Range Displays the estimated cruising range available with the remaining fuel. It is calculated based on your driving style over the last 18 miles/30 km. Average fuel consumption This is calculated for the period during which the engine is running.
Symbol Function Personal Profile settings, refer to page 22 . Exit the menu. Exiting displays 1. Press the button on the turn indicator lever repeatedly until "HOME" is displayed. 2. Hold the button down. The current speed is displayed again.
▷ Distance: km, mi. ▷ Temperature: ℃, ℉ 7. Press and hold the button until the display changes. 8. Press the button to change the format or the unit of measure.
Service requirements The remaining driving distance and the date of the next scheduled service are displayed briefly immediately after you start the engine or switch on the ignition. The current service requirements can be read out from the remote control by the service spe‐ cialist.
Symbol Function Roadworthiness test Front brake pads Rear brake pads Brake fluid Exit the display, refer to page 62 Next setting or information, re‐ fer to page 62 Check Control The concept The Check Control monitors vehicle functions and alerts you to any malfunctions in the sys‐ tems being monitored.
Hiding Check Control messages Press the button on the turn indicator lever. Some Check Control messages are displayed continuously and are not cleared until the mal‐ function is eliminated. If several malfunctions occur at once, the messages are displayed con‐ secutively.
Lamps Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version.
When the daytime running lights are activated, the low beams are always switched on in switch position 3 when the ignition is switched on. The exterior lighting goes out automatically af‐ ter the vehicle is switched off.
6. Press the button repeatedly until the sym‐ bol shown is displayed, arrow. 7. Press and hold the button until the display changes. 8. Press the button to select: ▷ Daytime running lights are activated. ▷ Daytime running lights are deactivated.
Depending on the steering angle and other pa‐ rameters, the light from the headlamp follows the course of the road. Activating With the ignition switch on, turn the light switch to position 3, refer to page 67 .
Switching interior lamps on/off manually To switch the interior lamps on/off: press the switch. If the interior lamps are to remain switched off, press the switch for approx. 3 seconds. Reading lamps Reading lamps are located in the front next to the interior lamp and in the rear.
Safety Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version.
Protective action Airbags are not triggered in every impact situa‐ tion, e.g., in less severe accidents or rear-end collisions. Information on how to ensure the opti‐ mal protective effect of the airbags ▷ Keep at a distance from the airbags.
Leave feet in the footwell Make sure that the front passenger keeps his or her feet in the footwell; otherwise, the front passenger airbags may not function prop‐ erly.
Operational readiness of airbag system In the radio ready state and beyond, re‐ fer to page 49 , the warning lamp lights up briefly to indicate that the entire air‐ bag system and the belt tensioners are opera‐ tional. Airbag system malfunction ▷ Warning lamp does not light up in the radio ready state.
Do not initialize the system when driving with snow chains. 1. Start the engine, but do not start driving. 2. Press the button on the turn indicator lever repeatedly until "SET/INFO" is displayed. 3. Press and hold the button until the display changes.
Continued driving with a flat tire If continuing to drive with a damaged tire: 1. Avoid sudden braking and steering maneu‐ vers. 2. Do not exceed a speed of 50 mph/80 km/h.
▷ When the TPM is disturbed by other sys‐ tems or devices with the same radio fre‐ quency. Resetting the system Reset the system after each correction of the tire inflation pressure and after every tire or wheel change. 1. Start the engine, but do not start driving.
Do not continue driving without run-flat tires Do not continue driving if the vehicle is not equipped with run-flat tires; continued driving may result in serious accidents. ◀ When a low inflation pressure is indicated, DSC Dynamic Stability Control is switched on if nec‐ essary.
Final tire failure Vibrations or loud noises while driving can indicate the final failure of the tire. Reduce speed and stop; otherwise, pieces of the tire could come loose and cause an accident. Do not continue driving, and contact your service center.
Driving stability control systems Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version.
appears in the tachometer. DSC is deactivated. Intervening measures to stabilize the vehicle and give it forward momentum are no longer executed. When driving with snow chains or to rock the vehicle free of snow, it may be useful to deacti‐ vate DSC temporarily.
The indicator lamp in the speedometer lights up and TRACTION appears in the tachometer. DTC is activated. Hill drive-off assistant This system supports driving away on gradients. The handbrake is not required. 1. Hold the vehicle in place with the foot brake.
Driving comfort Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version.
▷ The transmission position D is disengaged. ▷ DSC intervenes. Maintaining, storing the current speed Press button 1 or button 3. The current speed is maintained and stored. It is displayed briefly in the tachometer. On downhill gradients, it may prove impossible to maintain the set speed if the engine braking power is insufficient.
Avoid driving quickly with PDC PDC is a parking aid that can display ob‐ jects when the vehicle approaches them slowly, as is the case during parking maneuvers. Avoid driving toward an object quickly as the system may then be too late in issuing a warning for technical reasons.
Climate Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version.
Cooling function The passenger compartment can only be cooled with the engine running. The cooling function cools and dehumidifies the incoming air before reheating it as required, according to the temperature setting. The cooling function helps to prevent conden‐ sation on the windows or to remove it quickly.
Microfilter The microfilter traps dust and pollen. The mi‐ crofilter is changed by the service center during routine maintenance work. Microfilter/activated-charcoal filter The microfilter traps dust and pollen. The acti‐ vated-charcoal filter provides additional protec‐ tion by filtering gaseous pollutants from the outside air.
Air volume, manual Press the – button to reduce the air volume. Press the + button to increase the air volume. The automatic mode for the air volume can be switched on again using the AUTO button. The air flow rate may be reduced or the blower may be switched off entirely to save on battery power.
When switching between different temperature settings in rapid succession, the automatic cli‐ mate control does not have sufficient time to adjust the set temperature. Rear window defroster The rear window defroster switches off automatically after a certain period of time.
Interior equipment Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version.
3. Hold the hand-held transmitter of the sys‐ tem to be operated a distance of approx. 1 to 3 in/2.5 to 8 cm away from the buttons on the interior rearview mirror.
Canada: if the LED does not flash rapidly af‐ ter approx. 60 seconds, change the dis‐ tance and repeat the step. If programming was aborted by the hand-held transmitter, hold down the memory button and press and release the button on the hand-held transmitter several times for 2 seconds.
Press the adjustment button for 3‑4 seconds. The number of the compass zone set is shown in the display. To change the zone setting, briefly press the adjustment button repeatedly until the display shows the number of the compass zone corre‐ sponding to the current location.
Cupholders and ashtray/ lighter Cupholders Two cupholders are located in the center con‐ sole in the front. MINI Countryman: two additional cupholders are located at the end of the center console in the rear. Additional cupholders can be installed on the center rail.
Connecting electrical de‐ vices The lighter socket can be used as a socket for electrical equipment while the engine is run‐ ning or when the ignition is switched on. The total load of all sockets must not exceed 140 watts at 12 volt. Avoid damaging the sockets by attempting to insert plugs of unsuitable shape or size.
Cargo area Cargo cover Do not place objects on the covers Do not place objects on the cover; if you do so, they may pose a danger to vehicle occu‐ pants during braking or evasive maneuvers or damage the cover. ◀ When the tailgate is opened, the cargo cover is raised.
Before beginning with the mounting of a child restraint fixing system, note the instructions, refer to page 44 . 1. Hold the top of the backrest, for example the head restraint, and pull on the loop, ar‐ row. 2. Engage the backrest in the desired position or fold it down.
2. Lift the loading floor at the rear, arrow 1, and fold it forward, arrow 2. MINI Countryman: MINI Paceman: Before closing the tailgate, lower the loading floor back onto the cargo area floor. Removing The loading floor can be removed if necessary. 1.
To fold up, press the release button, arrow. MINI Countryman: multi-function hook Hooks designed for hanging shopping bags and totes, for example, are located on the left and right sides of the cargo cover support, arrow. Do not hang heavy items from the hooks Only hang light bags or suitable objects from the holders.
Storage compartments Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version.
Opening Turn the switch in the direction of the arrow. Closing Move the switch to the vertical position by turning it in the opposite direction of the arrow. Depending on the temperature setting of the air conditioning or automatic climate control, high temperatures may occur in the glove com‐ partment.
Installing 1. Insert the center armrest into the rear re‐ cess of the base plate, arrow 1. 2. Push it back and pivot it down at the front, arrow 2. 3. Push the center armrest forward in the base plate. 4. Tighten the handwheel by turning it clock‐ wise.
0 Setting 1 Adjusting the position on the rail 2 Inserting the base plate To insert, move the lever to position 2. Adjusting the position and fixing 1. Push lever 3 into position 1. 2. Adjust the position of the base plate. 3. Push lever 3 downward into position 0.
Connection for an exter‐ nal audio device This can be used to connect an external audio device, such as a CD or MP3 player. Radio MINI Boost CD, refer to page 130 .
Seite 107 Storage compartments Controls 107 Online Edition for Part no. 01 40 2 911 521 - VI/13.
DRIVE ME. Online Edition for Part no. 01 40 2 911 521 - VI/13.
At a glance Controls Driving tips Entertainment Communication Mobility Reference Online Edition for Part no. 01 40 2 911 521 - VI/13.
Things to remember when driving Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version.
Closing the tailgate Drive with the tailgate closed Only drive with the tailgate closed; other‐ wise, passengers and other road users may be endangered or the vehicle may be damaged if an accident occurs or during braking or swerv‐ ing. In addition, exhaust fumes may enter the passenger compartment.
Pulsation of the brake pedal and sounds from the hydraulic circuits indicate that ABS is in its active mode. Do not let your foot rest on the brake pedal Do not drive with your foot resting on the brake pedal. Even light but consistent pedal pressure can lead to high temperatures, brake wear and possibly even brake failure.
Driving on poor roads Your MINI with ALL4 all-wheel drive feels com‐ fortable on all streets and roads. It combines an all-wheel drive system with the advantages of a normal passenger car. Do not drive on unpaved terrain Do not drive on unpaved terrain, as oth‐ erwise the vehicle may be damaged.
Loading Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version.
5-seater: The maximum load is the sum of the weight of the occupants and the cargo. The greater the weight of the occupants, the less cargo that can be transported. Stowing cargo ▷ Very heavy cargo: when the rear seat is not occupied, secure each of the outer safety belts in the opposite buckle.
MINI Paceman Securing cargo ▷ Secure smaller and lighter pieces with tight‐ ening belts or straps. ▷ Secure larger and heavier pieces with cargo straps. Adhere to the information included with the cargo straps. ▷ Eight mounting eyes are available for fas‐ tening the cargo straps.
Follow the installation instructions for the rear rack. Anchorage points MINI Countryman: MINI Paceman: The anchorage points are under the covers in the bumper. Push out the covers on the corresponding cut‐ outs. Loading When loading the vehicle, ensure that the ap‐ proved gross vehicle weight and the axle loads are not exceeded.
Saving fuel Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version.
Switch off the engine during longer stops Switch off the engine during longer stops, e.g., at traffic lights, railroad crossings or in traffic congestion. Fuel savings are already achieved after the en‐ gine is turned off for as little as 4 seconds.
ROCK ME. Online Edition for Part no. 01 40 2 911 521 - VI/13.
At a glance Controls Driving tips Entertainment Communication Mobility Reference Online Edition for Part no. 01 40 2 911 521 - VI/13.
Radio MINI Boost CD Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version.
11 CD slot. 12 Eject the CD. Representation in the Owner's Manual "…" Identifies radio display texts used to select individual functions. Menu navigation Radio and telephone functions can be opened using buttons on the radio and menus.
Adjusting the volume Turn the left knob. The setting is stored for the remote control currently in use. When a call is placed using the hands-free sys‐ tem, the audio sources are muted. Speed-dependent volume and volumes of PDC signal tone and gong ▷ "PDC": volume of the PDC signal tone com‐ pared to the audio sources.
▷ "LANG": select the language of the dis‐ play texts. ▷ "CONSMP": change the unit of measure for the average fuel consumption. ▷ "TEMP": change the unit of measure for the external temperature. 5. Highlight the desired menu item and press the button.
Automatically updating the stations with the best reception, AUTOSTORE In the FMA and AMA memory levels, stations are automatically stored according to their re‐ ception strength. If the AUTOSTORE function is not used, six stations can be manually stored in each of the FMA and AMA memory levels.
HD Radio Technology manufactured under li‐ cense from iBiquity Digital Corporation. U.S. and Foreign Patents. HD Radio™ and the HD, HD Radio, and Arc logos are proprietary trade‐ marks of iBiquity Digital Corp. Activating/deactivating digital radio reception 1.
A phone number and the electronic serial number, ESN, are displayed. The electronic serial number is required for deactivation. 4. To have the channels deactivated, call the phone number. Selecting and storing a channel 1. Press the button. 2. "SAT" 3.
Starting the CD player A CD is contained in the CD player. 1. Switch on the car radio if necessary. 2. Press the button. 3. "CD" Skipping to another track Press the button repeatedly until the desired track is played. With the right knob: Turn the right knob until the desired track is played back.
CDs Using CDs ▷ Do not use self-recorded CDs with la‐ bels applied, as these can become detached during playback due to heat buildup and can cause irrepara‐ ble damage to the device. ▷ Only use round CDs with a standard diame‐ ter of 4.7 in/12 cm and do not play CDs with an adapter, e.
Connecting The AUX-IN port is in the center console. Connect the headphone connec‐ tor or line-out connector of the device to the AUX-IN port. Ensure that the connector is inserted all the way into the AUX-IN port. Playback 1. Connect the audio device, switch it on and select a track on the audio device.
Connecting The USB audio interface is in the center console. Connection of Apple iPod/iPhone via USB audio interface To connect the iPod, use the special cable adapter for the Apple iPod. Additional informa‐ tion can be obtained from the service center or on the Internet: www.
Random playback "RND" To end random playback: "RND" Selecting a track Depending on the connected device, the track can be selected via the following category: ▷ "LIST": playback lists. ▷ "GEN": musical genre.
CONNECT ME. Online Edition for Part no. 01 40 2 911 521 - VI/13.
At a glance Controls Driving tips Entertainment Communication Mobility Reference Online Edition for Part no. 01 40 2 911 521 - VI/13.
Telephone Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version.
5 Opens the main menu. 6 On/off, volume control. Menu navigation Selecting menu items There are two ways to select a menu item on the display. Using the right knob ▷ To mark a menu item: turn the right knob, arrow 2. ▷ To select a menu item: press the right knob, arrow 1.
3. "PHONE" 4. "BT-ON" To deactivate the connection again: 1. "BT" 2. "BT-OFF" 3. "YES" Pairing and connecting Pairing the mobile phone To avoid becomi.
5. Turn the right knob until the mobile phone to be connected is displayed. 6. "PRIO" Press the button repeatedly until the de‐ sired position is reached. Unpairing the mobile phone 1. Switch on the radio ready state or the igni‐ tion. 2.
▷ Dial a stored phone number, such as from the list of accepted calls. ▷ End the call. When the ignition and the radio ready state are switched off, such as after the remote control is removed, an existing call can be continued for up to 25 minutes on the hands-free system.
▷ "A-Z" Entries of the phone book of the SIM card or of the mobile phone, which consist of a name and phone number, are sorted in al‐ phabetical order. ▷ "TOP8" The Top 8 list contains the eight phone numbers that were dialed most frequently.
Dialing a phone number stored in a list To select an entry and establish a connection: 1. Switch on the radio ready state or the igni‐ tion. 2. Press the button. 3. "PHONE" 4. Select a list, for instance "TOP8" 5. Turn the right knob to select an entry and press the knob to dial the phone number.
Snap-in adapter General information More information on compatible snap-in adapters that support the functions of the mo‐ bile phone is available at the service center. Notes At high temperatures, the charging function of the mobile phone may be limited and functions may not be executed.
Removing the mobile phone Press the button and remove the mobile phone. Seite 144 Communication Telephone 144 Online Edition for Part no. 01 40 2 911 521 - VI/13.
Seite 145 Telephone Communication 145 Online Edition for Part no. 01 40 2 911 521 - VI/13.
MOVE ME. Online Edition for Part no. 01 40 2 911 521 - VI/13.
At a glance Controls Driving tips Entertainment Communication Mobility Reference Online Edition for Part no. 01 40 2 911 521 - VI/13.
Refueling Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version.
MINI Paceman: 1. Open the cargo area trim, arrow. 2. Pull the green knob with the gas pump symbol. This opens the fuel filler flap. Observe the following when refueling When refueling, insert the filler nozzle com‐ pletely into the filler pipe. Lifting up the fuel pump nozzle during refueling causes: ▷ Premature pump shutoff.
Fuel Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version.
Seite 151 Fuel Mobility 151 Online Edition for Part no. 01 40 2 911 521 - VI/13.
Wheels and tires Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version.
MINI Countryman: MINI Paceman: Do not exceed the maximum permissible speed The maximum permissible speed for these tire pressures is 100 mph/160 km/h. Do not exceed this speed; otherwise, tire damage and acci‐ dents may occur.
Tire inflation pressures for MINI Countryman Cooper S/Countryman Cooper S ALL4 Tire size Pressure specifications in bar/PSI Traveling speeds of up to 100 mph/160 km/h Traveling speeds above 100 mph/160 km/ All pressure specifications in the table are indicated in bar/PSI with cold tires.
Tire inflation pressures for MINI Paceman Cooper Tire size Pressure specifications in bar/PSI Traveling speeds of up to 100 mph/160 km/h Traveling speeds above 100 mph/160 km/ All pressure specifications in the table are indicated in bar/PSI with cold tires.
Tire inflation pressures for MINI Paceman John Cooper Works Tire size Pressure specifications in bar/PSI Traveling speeds of up to 100 mph/160 km/h Traveling speeds above 100 mph/160 km/ All pressure specifications in the table are indicated in bar/PSI with cold tires.
Conform to Federal Safety Requirements All passenger car tires must conform to Federal Safety Requirements in addition to these grades. ◀ Treadwear The treadwear grade is a comparative rating based on the wear rate of the tire when tested under controlled conditions on a specified gov‐ ernment test course.
Minimum tread depth Wear indicators in the tread base are distrib‐ uted around the circumference of the tire and are marked on the tire sidewall with TWI, Tread Wear Indicator. When the tire tread has been worn down to the wear indicators, a tread has reached a depth of 0.
Changing wheels and tires Mounting Information on mounting tires Have mounting and balancing performed only by a service center or tire specialist. If this work is not carried out properly, there is the danger of subsequent damage and related safety hazards.
Maximum speed of winter tires If the maximum speed of the vehicle is higher than the permissible speed for the winter tires, then display a corresponding sign in the field of vision. You can obtain this sign from the tire specialist or from your service center.
▷ If a warning triangle or portable hazard warning lamp is required, set it up on the roadside at an appropriate distance from the rear of the vehicle. Comply with all safety guidelines and regulations. ◀ The procedure to correct a flat tire depends on the equipment in the vehicle: ▷ Run-flat tires, refer to page 160 .
3. Insert the sealant bottle into the compres‐ sor housing in a vertical position. 4. Unscrew the dust cap off of the valve of the defective wheel and screw the filling hose 2 of the sealant bottle onto the valve. 5. Ensure that the compressor is switched off.
Do not allow the compressor to run too long Do not allow the compressor to run longer than 10 minutes; otherwise, the device will overheat and may be damaged. ◀ If the inflation pressure is not maintained, take the vehicle on another drive, distributing the sealant, refer to page 162 .
Engine compartment Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version.
To avoid damage, make sure that the wiper arms are resting against the wind‐ shield before you open the engine compart‐ ment. Do not open the engine hood before the engine has cooled down; otherwise, injuries may result. ◀ Unlocking and opening the hood 1.
Engine oil Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version.
Too much engine oil Have the vehicle checked immediately; otherwise, surplus oil can lead to engine dam‐ age. ◀ Protect children Keep oil, grease, etc.
Coolant Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version.
Maintenance Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version.
Socket for OBD Onboard Diagnosis Socket for Onboard Diagnosis The socket for Onboard Diagnosis may only be used by the service center, by work‐ shops that operate according to the specifica‐ tions of the vehicle manufacturer with appro‐ priately trained personnel, and by other authorized persons.
Replacing components Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version.
Lamp and bulb replace‐ ment Notes Lamps and bulbs Lamps and bulbs make an essential contribu‐ tion to vehicle safety. Therefore, exercise cau‐ tion when handling lamps and bulbs.
Due to the high voltage present in the system, there is the danger of fatal injuries if work is carried out improperly. ◀ Front lamps, bulb replacement Halogen low beams and high beams Bulb H13, 60/55 watt Wear protective goggles and gloves Halogen bulbs are pressurized.
1 Turn signal 2 Parking lamp/roadside parking lamp/fog lamp Replacing the turn signal bulb 21-watt bulb, P 21 W, or PY 21 W 1. Turn the wheel. 2. Remove cover 1. To do this, turn the cover counterclockwise. 3. Remove the inside cover. To do this, turn the cover counterclockwise.
Lateral turn signals 5-watt bulb, W 5 W 1. Open the hood. 2. Squeeze the clip, arrows, and remove the bulb holder. 3. Remove the bulb by turning it to the left and replace it. 4. Insert the new bulb and attach the cover in reverse order. Side marker lamps To replace these bulbs, contact the service cen‐ ter.
5. Disengage the bulb holder by pushing down the clip, arrow 1. 6. Take out the bulb holder and detach the cable, arrow 2. 7. Apply gentle pressure to the bulb while turning it to the left and remove it. 8. Insert the new bulb and mount the bulb holder in reverse order.
Replacing MINI Countryman 1. Push the lamp to the left in the catch of the lamp housing using the screwdriver, ar‐ row 1. 2. Take out the lamp, arrow 2. 3. Replace the bulb. 4. Insert the lamp. MINI Paceman 1. Push the lamp to the left in the catch of the lamp housing using the screwdriver, ar‐ row 1.
Vehicle battery Maintenance The battery is maintenance-free, i.e., the elec‐ trolyte will last for the life of the battery in tem‐ perate climate conditions.
In the engine compartment Opening the cover Press the snap lock. In interior On the right side of the footwell. Opening the cover Push out at the recess.
Breakdown assistance Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version.
jumper cables with fully insulated clamp han‐ dles. To prevent personal injury or damage to both vehicles, adhere strictly to the following proce‐ dure. Do not touch live parts To avoid the risk of potentially fatal injury, always avoid all contact with electrical compo‐ nents while the engine is running.
the battery, or to the engine or body ground of the vehicle to be started. Body ground: Starting the engine Never use spray fluids to start the engine. 1. Start the engine of the assisting vehicle and let it run for several minutes at a slightly in‐ creased idle speed.
MINI Countryman: rear MINI Paceman: rear Being towed Follow the towing instructions Follow all towing instructions, or vehicle damage or accidents may occur. ◀ ▷ Make sure that the ignition is switched on; otherwise, the low beams, tail lamps, turn signals, and windshield wipers may be un‐ available.
With a tow truck: vehicles without ALL4 all-wheel drive Do not lift the vehicle Do not lift the vehicle by the tow fitting or body and chassis parts; otherwise, damage may result. ◀ MINI Countryman: MINI Paceman: Have the vehicle transported with a tow truck with a so-called lift bar or on a flat bed.
5. Stop at a suitable location, remove the tow bar or rope, and switch off the hazard warning system. 6. Have the vehicle checked. Seite 185 Breakdown assistance Mobility 185 Online Edition for Part no.
Care Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version.
▷ Remove additional attachments, for in‐ stance a spoiler or telephone antenna, if there is a risk that these may be damaged. ▷ Insert the remote control into the ignition lock. Automatic transmission Before driving into the car wash, note the fol‐ lowing to ensure that the vehicle can roll: 1.
Vehicle paint Regular care contributes to vehicle value reten‐ tion and protects the paintwork against the long-term effects of paint-damaging substan‐ ces. Environmental influences in areas with higher air pollution or natural contaminants, such as tree resin or pollen, can have an impact on the vehicle paint.
Chrome surfaces Carefully clean components such as the radia‐ tor grille or door handles with an ample supply of water, possibly with shampoo added, partic‐ ularly when they have been exposed to road salt. For additional treatment, use a chrome polish.
Indicator/warning lamps Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version.
1 2 Cause How to respond The engine refuses to start. Depress the brake or clutch to start the engine, refer to page 50 . The ignition is switched on and driver's door is open. Switch off the ignition, refer to page 49 , or close the driver's door.
1 2 Cause How to respond The remote control is malfunctioning or, in cars with Comfort Access, was not detected. The engine cannot be started. Have the remote control checked, if nec‐ essary. The battery in the remote control is dis‐ charged. Use the remote control for a longer journey or, in cars with Comfort Ac‐ cess, replace the battery.
1 2 Cause How to respond Lights up in red: The engine is overheating. Carefully bring the car to a stop, switch off the engine and allow it to cool down. Do not open the hood; otherwise, there would be a risk of injury due to scalding. Contact your service center.
1 2 Cause How to respond Indication in US models Lights up in red: The brake fluid level is too low. Reduced braking effect, stop the car carefully. Contact the nearest service center. Indication in Canadian models Lights up in red: The brake fluid level is too low.
1 2 Cause How to respond Lights up in red: Have the system in question checked immediately. The starter has failed or The engine cannot be restarted. Ignition malfunctioning. The engine can only be restarted when the brake is de‐ pressed or Lighting system failed.
1 2 Cause How to respond ALL4 all-wheel drive failed. It is possible to continue driving. Drive cautiously and defensively. Avoid operating on poor roads and using the full throttle and kickdown positions of the accelerator. Have the system checked immediately.
1 2 Cause How to respond Indication in Canadian models The driving stability control systems includ‐ ing ABS and the Flat Tire Monitor or the Tire Pressure Monitor have failed, refer to page 81 . Reduced braking and driving stabil‐ ity. Drive cautiously and defen‐ sively.
1 2 Cause How to respond In vehicles with the Tire Pressure Monitor Light up in yellow and red: There is a flat tire or substantial loss of tire pressure. Carefully bring the car to a stop. Additional information, refer to page 77 . In vehicles with the Tire Pressure Monitor Light up in yellow: Tire Pressure Monitor not initialized.
1 2 Cause How to respond Gears can be engaged without depressing the brake. Always depress the brake to en‐ gage a gear. Automatic selector lever locked: Manually unlock the selector lever lock, refer to page 58 . Lights up in yellow: Have the system checked as soon as possible.
1 2 Cause How to respond The cruise control system has failed. Have the system checked. The Park Distance Control has failed. Have the system checked. A bulb of the exterior lighting system has failed. Have the exterior lighting checked as soon as possible.
1 2 Cause How to respond No service due. The set speed limit was exceeded. The time and date are no longer correct. Set the time and date, refer to page 63 .
FIND ME. Online Edition for Part no. 01 40 2 911 521 - VI/13.
At a glance Controls Driving tips Entertainment Communication Mobility Reference Online Edition for Part no. 01 40 2 911 521 - VI/13.
Technical data Vehicle equipment This chapter describes all series equipment as well as country-specific and special equipment offered for this model series.Therefore, it also describes equipment that may not be found in your vehicle, for instance due to the selected special equipment or the country version.
MINI Countryman Cooper Cooper S John Cooper Works Wheelbase inches/mm 102.2/2,595 102.2/2,595 102.2/2,596 Smallest turning circle dia. ft/m 38.1/11.6 38.1/11.6 38.1/11.6 MINI Paceman MINI Paceman Cooper Cooper S John Cooper Works Width with mirrors inches/mm 78.
Cooper Cooper S Approved roof load capacity lbs/kg 165/75 165/75 Cargo area capacity cu ft/liter 12.4–41.3/ 350–1,170 12.4–41.3/ 350–1,170 Cooper S ALL4 John Cooper Works Curb weight, road rea.
Cooper Cooper S Cooper S ALL4 John Cooper Wor ks Approved front axle load Manual transmission lbs/kg 2,050/930 2,120/962 2,180/989 2,200/998 Automatic transmis‐ sion lbs/kg 2,120/962 2,170/984 2,220.
Everything from A to Z Index A ABS, Antilock Brake Sys‐ tem 81 Acoustic signal, refer to Check Control 65 Activated charcoal filter with automatic climate con‐ trol 91 Adaptive Light Control 69 Ad.
Breakdown assistance, Road‐ side Assistance 180 Breaking in 110 Buckle tongue, rear – Height adjustment 39 Button for starting the engine, refer to Start/Stop button 49 C California Proposition 65.
Dashboard, refer to Dis‐ plays 16 Data, technical 204 Date – Display format 62 – Setting 63 Daytime running lights 68 Decorative trim, care 189 Defogging windows 88 Defroster – Rear window 88 .
F Failure messages, refer to Check Control 65 False alarm, refer to Avoiding unintentional alarms 32 Fastening safety belts, refer to Safety belts 38 Fault messages, refer to Check Control 65 Filling .
Hood, opening 165 Hood, unlocking 165 Horn 14 Hydraulic brake assistant 81 I Ice warning, refer to External temperature warning 59 Icy roads, refer to External temperature warning 59 Identification ma.
Low beams, bulb replace‐ ment 173 Lower back support, refer to Lumbar support 37 Lumbar support 37 M Main inspection, refer to Serv‐ ice requirements 64 Maintenance, refer to Service booklet Maint.
Prescribed engine oils, refer to Approved engine oils 167 Pressure monitoring of tires, refer to Tire Pressure Monitor TPM 77 Pressure, tires 152 Pressure warning, tires 75 Profile depth, refer to Min.
Service requirements, CBS Condition Based Service 169 Settings – Clock, 12h/24h format 62 Settings and information 61 Settings, configuring, refer to Personal Profile 22 Shifting – Automatic trans.
Trip-distance counter, refer to Trip odometer 59 Triple turn signal activa‐ tion 52 Trip odometer 59 Trunk lid, refer to Tailgate 28 Trunk, refer to Cargo area 28 Turning lamps, refer to Adap‐ tiv.
.
01 40 2 911 521 ue *BL291152100L* DRIVE ME. Online Edition for Part no. 01 40 2 911 521 - VI/13.
Ein wichtiger Punkt beim Kauf des Geräts Mini Countryman (2014) (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Mini Countryman (2014) noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Mini Countryman (2014) - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Mini Countryman (2014) reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Mini Countryman (2014) erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Mini Countryman (2014) besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Mini Countryman (2014) verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Mini Countryman (2014). Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Mini Countryman (2014) gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
