Benutzeranleitung / Produktwartung W 1215 des Produzenten Miele
Zur Seite of 56
Operating and Installation Instructions Washer W 1215 To prevent accidents and machine damage, read these instructions before installation or use. M.-Nr.
IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Guide to the washer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Control panel .....................
Quick Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Cleaning the water inlet filters ........................................2 8 Cleaning the inlet hose filter ......................
, WARNING - To reduce the risk of fire, electric shock or injury to persons while using your appliance follow basic safety precautions, including the following: ~ Read all instructions before using the appliance. ~ GROUNDING INSTRUCTIONS This appliance must be grounded.
Control panel a Program selection buttons e- For selecting a program. b Wash options Special features to enhance a wash program. c Temperature button For selecting the desired wash temperature. d Spin speed button For selecting the desired spin speed.
The appliance must be correctly installed and connected before the first use. Please see the "Installation instructions". This washing machine has undergone thorough functional testing in the factory, there may be some residual water in the drum from this process.
1. Prepare and sort the laundry ^ Empty all pockets. , Foreign objects left in pockets (e.g. nails, coins, paper clips, etc.) can cause damage to clothes and the machine. ^ Sort the laundry. Only wash items in the machine that are labeled machine washable by the manufacturer.
2. Load the laundry ^ Turn on the washer using the "On / Off" button. ^ Open the drum door using the "Door" button. ^ Load the laundry into the drum. For best results, wash mixed loads of small and large items. This will improve washing effectiveness and help distribute the load evenly.
Program guide Temperatures Fabric care symbol Spin speed Laundry Normal Options: Extended, Heavy Soil, Soak, Sensitive Hot D Max For a rapid wash of colorfast items and mixed loads made from cottons and linen, e.
Temperatures Fabric care symbol Spin speed Laundry Woolens / Options: Sensitive Warm B High For hand and machine washable wool and wool blends. Cold A Med No Heat e Silk Options: Sensitive Cold A Slow For hand and machine washable silks and other non-wool hand washable garments.
4. Select wash options (if needed) The upper button selects the following "OPTIONS": – Extended – Extended and Heavy Soil – Extended and Soak – Heavy Soil – Soak – No selection The lower button selects the "Sensitive" option.
5. Select the temperature and spin speed The default temperature and spin speed will automatically be selected for each program. However, you can adjust the temperature and spin speed within the parameters of the selected wash program. ^ Press the "TEMP" and "SPIN" buttons until the indicator of the desired setting lights.
Special spin options Hold (only for the "Custom" program) ^ Select "Hold". The laundry is not spun and remains soaking in water. This will prevent wrinkles if the laundry is not removed immediately at the end of the wash program. To start the final spin ^ Select the desired spin speed.
6. Add detergent For optimum wash results, it is important to use the correct amount of detergent. Too little detergent may cause: – Ineffective cleaning of laundry; fabrics may become gray and stiff over time. – Grease stains on the laundry. – Hard water deposits on the heating element.
Use only high efficiency, low sudsing laundry detergent formulated for front loading washing machines. For wool and wool blend fabrics, use a detergent specially formulated for woolens. Follow instructions on the detergent packaging to ensure the correct usage and dosage amount.
The amount of detergent used depends on the level of soiling: Light soiling No soiling or stains are visible. Normal soiling Some visible soiling or a few light stains.
Fabric softener Fabric softener added to the wash program will make fabrics feel softer and will reduce static cling in the dryer. ^ Open the lid of the fabric softener compartment § . ^ Pour liquid fabric softener into the compartment according to the manufacturer’s instructions.
Starch Mild liquid starch is a synthetic starch wash used to give fabrics some stiffness. Starching can be included in any wash program as part of the final rinse. ^ Open the fabric softener compartment § . ^ Add the recommended amount of starch to the compartment.
7. Select Delay Start (if needed) If you wish, the start of the wash program can be delayed to have a load completed at a later time. Delay start allows you to delay the start of a program for 30 minutes to a maximum of 24 hours. ^ Press the "Delay Start" button.
10. Remove the laundry The "STATUS" indicator "Anti-Crease / End" will be displayed at the end of the program. ^ Use the "Door" button to open the drum door. Do not attempt to remove laundry from the washer if the drum is turning.
Canceling a program You can cancel a wash program any time after a program starts. ^ Press the "Start / Stop" button. The washer drains the wash water away and the program is canceled. To add or remove laundry ^ Press the "Door" button.
Adding / removing laundry during a wash program You can interrupt the following programs to add or remove a piece of laundry: – Normal – Wrinkle-free – Sturdy ^ Use the "Door" button to open the door. ^ Add or remove the piece of laundry.
Electronic program lock Washer in use The program lock prevents the washer from being opened or the program, temperature or spin speed from being changed during a wash program. To activate the program lock ^ Once the wash program has started, hold the "Start / Stop" button until the "Child Lock" indicator illuminates.
, Before cleaning the appliance, disconnect the power supply by unplugging the unit or manually tripping the circuit breaker. Cleaning the washer ^ Clean the exterior of the washer with a mild solution of non-abrasive detergent or soap and water. Wipe dry with a soft cloth.
Cleaning the detergent drawer Detergent residue should be cleaned out regularly. ^ Pull the detergent drawer out as far as it will go. Press down on the red release lever and pull the drawer out of the machine. ^ Clean the detergent drawer with warm water.
Cleaning the drain pump and lint trap Occasionally, small objects (buttons, coins, etc.) may become trapped in the lint trap. If the machine does not drain completely, the lint trap should be checked to ensure that it is free of foreign objects. ^ Turn off the appliance with the "On / Off" button.
Quick Guide Remove this guide for easy reference Please read all instructions, especially the "Important Safety Instructions", before using the washer.
1. Sort the laundry. ^ Empty all pockets. ^ Sort the laundry by fabric and color. ^ Pretreat stains. 2. Load the laundry ^ Turn on the washer using the "On / Off" button. ^ Open the drum door by using the "Door" button. ^ Load the laundry.
5. Select the temperature and spin speed ^ Press the "TEMP" and "SPIN" buttons until the indicator of the desired value lights. 6. Add detergent ^ Place the recommended amount of detergent into the main wash compartment j . If "Heavy Soil" is selected, add 1 / 4 of the total amount of detergent to the i compartment.
Program guide Normal Options: Extended, Heavy Soil, Soak, Sensitive Temperatures: Hot D , Very Warm C , Warm B , Cold A , No Heat e Spin speeds: Max, High Items: For a quick load of colorfast items.
Once the flow of water stops: ^ Remove the lint trap lid. ^ Remove any foreign objects or lint from the filter. ^ Check that the impeller (in the back of the chamber) rotates freely by spinning it with your hand. ^ Return the lint trap and tighten into place.
Cleaning the water inlet filters The washer has two water inlet filters to protect each inlet valve. These filters should be checked every 6 months and cleaned, if necessary. (This may need to be performed more frequently with some water supplies). Cleaning the inlet hose filter ^ Turn off the water valve.
Changing the light bulb A burnt out light bulb will not affect the performance of the washer. ^ Remove the tool from behind the detergent dispenser drawer. ^ Turn the washer on and open the door. ^ Disconnect the power supply to the work area by unplugging the unit, tripping the circuit breaker or removing the fuse.
, Repairs to electrical appliances must only be carried out by a qualified and trained person in accordance with local and national safety regulations. Repairs and other work by unqualified persons could be dangerous. The manufacturer cannot be held responsible for unauthorized work.
The program was interrupted and a fault message appears. Issue Possible cause Solution* The buzzer sounds, and the "Drain" indicator flashes. "- - -". appears in the display. The drain is blocked. Clean the drain pump and lint trap.
General issues with the washer Issue Possible cause Solution The "Oversudsing" indicator lights. The machine has over sudsed. Use less detergent in the next wash program. The "Main wash" indicator flashes. There is a fault. Restart the program.
Poor wash results Issue Possible cause Solution The wash does not come clean with liquid detergent. Liquid detergents do not contain bleaching agents. Fruit, coffee and tea stains cannot be effectively removed. – Use powdered bleach. – Do not put liquid detergent and stain remover together in the same wash compartment.
The door will not open when the "Door" button is pressed. Possible cause Solution The washer has no power. Insert the plug into the outlet. The washer is not turned on. Turn on the washer using the "On / Off" button. The program lock is activated.
Opening the drum door during a power failure ^ Open the detergent dispenser drawer and remove the tool. ^ Open the lint trap door. ^ Drain the water from the washer as described in "Cleaning and Care - Cleaning the drain pump and lint trap".
Repairs In the event of a fault which you cannot fix yourself, please contact Technical Service using the information on the back of this manual. ^ Please quote the model and serial number of your appliance when contacting the Technical Service Department.
Installation Instructions To prevent accidents and machine damage read these instructions before installation or use..
Disposal of the packing material The cardboard box and packing materials protect the appliance during shipping. They have been designed to be biodegradable and recyclable. Ensure that any plastic wrappings, bags, etc. are disposed of safely and kept out of the reach of children, as they pose a danger of suffocation.
Front view a Hot water intake hose b Cold water intake hose c Power cord d - g Drain hose (drain options shown i.e adjustable and removable elbows). h Control panel i Detergent dispenser drawer j Drum.
Back view a Lid excess end with transport grips b Power cord c Cold water intake hose d Hot water intake hose e Drain hose f Shipping struts with rotary protection g Mounting for: – Water intake hos.
Installation site A concrete floor is the most suitable surface for the washer. Concrete floors are less prone to vibration during the spin cycle than wooden floors. Note: – The machine must be leveled and securely positioned. – To avoid vibration while spinning, the machine should not be installed on soft floor coverings.
^ Turn the left shipping strut counterclockwise 90° with the enclosed combination wrench. ^ Pull out the shipping strut. ^ Turn the right shipping strut clockwise 90° with the enclosed combination wrench.
^ Close the holes with the rotary protectors, making sure to close the caps. ^ Fasten the shipping struts to the rear of the washer. Take care to insert the drill holes correctly, b , into the clamps, a . , Do not move the washer without the shipping struts in place.
Level the washer To ensure smooth operation, the washer must be level. Failure to level the machine can result in increased water and energy consumption, loud noises during the spin cycle or "walking" across the floor during use.
Installation beneath a counter If a countertop is placed over the washer, at least a 1 / 4 " gap must be left between the top of the machine and bottom of the countertop; nothing should be within ½" of any side of the washing machine.
Washer / Dryer Stack The Miele washing machine can be installed as part of a washer-dryer stack in combination with a Miele tumble dryer. An appropriate "stacking kit*" is required.
The washing machine can be connected to a portable water supply. A non-return valve is not needed unless required by building code. The washing machine has ½" (13 mm) pressure hoses with 3 / 4 " (19 mm) female hose thread connections. If there is no water hookup, contact a plumber to install a connection.
Water connection ^ Connect the cold water intake hose (blue mark) to the cold water valve and the hot water intake hose (red mark) to the hot water valve.
Drainage The 5 foot (1.5 m) drain hose may be connected as follows: 1. Directly into a sink: hook the hose over the edge of the sink and secure it firmly (e.g. by tying the hose to the water faucet). 2. To a stand pipe: place the drain hose int oa1½ "( 4c m ) stand pipe and secure it firmly.
GROUNDING INSTRUCTIONS This appliance must be grounded. In the event of a malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. This appliance is equipped with a cord having an equipment-grounding conductor and a grounding plug.
51.
Alterations rights reserved / 4507 For the most updated manual see the Miele web site. M.-Nr. 05 874 921 / 04.
Ein wichtiger Punkt beim Kauf des Geräts Miele W 1215 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Miele W 1215 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Miele W 1215 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Miele W 1215 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Miele W 1215 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Miele W 1215 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Miele W 1215 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Miele W 1215. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Miele W 1215 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
