Benutzeranleitung / Produktwartung S 5281 des Produzenten Miele
Zur Seite of 44
Operating instructions Vacuum cleaner S 5001 To prevent accidents and appliance damage, read these instructions before installation and use. M.-Nr. 07 915 310 en - US, CA www.
2 www.sylvane.com 1-800-934-9194.
IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Guide to the vacuum cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Before using the vacuum cleaner . . . . . .
When using an electrical appliance, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE WARNING- To reduce the risk of fire, electric shock or injury: Before using ~ Check the voltage rating of the vacuum cleaner before connecting the power cord to an electrical outlet.
Use ~ Do not use on people or animals. ~ Do not use outdoors or on wet surfaces. Only dry surfaces should be vacuumed. ~ Use only as described in this manual. Use only Miele recommended accessories. ~ This appliance is intended for household use only.
~ Do not unplug by pulling on the cord. To unplug, grasp the plug, not the cord. ~ Do not handle the plug or vacuum with wet hands. ~ Keep the power cord, hair, loose clothing, fingers and all parts of the body away from openings and moving parts. ~ Do not place anything into the openings of the vacuum.
~ The socket on the vacuum cleaner (depending on model) must only be used for the Miele Powerbrush specified for use with this appliance. ~ Danger of injury. The Miele Powerbrush is a motor driven accessory for use only with Miele vacuum cleaners. The vacuum must not be used with another manufacturer’s powerbrush.
Some models come standard with one of the following accessories, which are not shown in this figure. A separate Operating manual of the respective accessory is supplied with the vacuum. – Powerbrush – Turbobrush Guide to the vacuum cleaner 8 www.sylvane.
a Handpiece (depending on model) * b Suction power buttons + / –* c Standby button for vacuum pauses * d LED * e Locking button f Telescopic wand * g Telescopic wand release button * h Elbow i Power.
Attaching the suction hose ^ Insert the elbow into the suction socket until it clicks. Use the inlet guides to direct insertion. Removing the suction hose ^ Press the release buttons at the sides of the elbow and lift the hose from the socket. Before using the vacuum cleaner 10 www.
Connecting the handpiece and the telescopic wand ^ Insert the handpiece into the telescopic wand until it clicks. Use the inlet guides to direct insertion. ^ To release the handpiece from the telescopic wand press the locking button (see arrow) and pull the handpiece away from the telescopic wand.
Connecting the standard floor brush (depending on model) ^ Insert the telescopic wand into the floor brush and turn in either direction until it locks with a click. ^ To release the floor brush from the telescopic wand, press the locking button (see arrow) and pull the wand out of the floor brush.
The following accessories are included: a Crevice nozzle b Dust brush with natural bristles c Upholstery tool Taking the accessories out ^ Press the release button. The accessory compartment lid opens. ^ Take out the accessory needed. ^ Close the lid securely.
Crevice tool For cleaning in folds, crevices and corners. Dust brush with natural bristles For cleaning moldings, ornate or carved articles, etc. The head of the dusting brush swivels and can be turned to attain the best cleaning position. Included accessories 14 www.
Upholstery tool For cleaning upholstery, mattresses, cushions, curtains, covers, etc. Standard floor brush (depending on model) The standard floor brush can be used for normal cleaning of carpets, rugs, hard surfaces, carpeted stairs, etc. For safety, when vacuuming stairs it is best to start at the bottom and move upwards.
Power cord , Unwind the cord completely to aid the vacuum in dissipating heat. Unwinding ^ Hold the plug and pull out the power cord. , To reduce the risk of electric shock, the vacuum has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way.
While vacuuming The vacuum cleaner can also stand on its end for vacuuming stairs, drapes, etc. , To prevent static electricity your hand must touch the metal inlay on the underside of the vacuum handpiece.
Rotary selector ^ Turn the rotary selector to the desired suction power setting. + / – controls Press and hold the respective +/- control until the desired power setting lights up green. ^ Press the + control to select a higher setting. ^ Press the – control to select a higher setting.
Opening the air inlet valve The air inlet valve is designed to provide a quick, convenient reduction of suction power, e.g. when moving from a carpet to an area rug. ^ Open the air inlet valve far enough to reduce the power. Opening the air inlet valve reduces the power to the tool being used.
Park-System (Unable to use with Powerbrushes SEB 228 and SEB 236) A Park-System has been designed to conveniently park the telescopic wand at the vacuum cleaner during pauses. ^ A special parking attachment is fitted to all floor brushes. Insert the lower clip on the floor brush into the slot on the end of the vacuum cleaner from above.
Transport and storage ^ For easier transportation and storage stand the vacuum cleaner vertically. ^ Insert both clips of the floor brush into the two point holder on either side of the vacuum (this function cannot be used with Electrobrushes SEB 228 and SEB 236).
, Turn off and unplug the vacuum cleaner before performing any maintenance work. The Miele filter system consists of the following three components. – Dustbag – Exhaust filter – Dust compartment filter Each of these components must be changed periodically to maintain the vacuum cleaner’s efficiency.
When to change the dustbag Change the dustbag when the colored marker in the airflow indicator fills the display. Miele dustbags are disposable and made to be used only once. Do not attempt to reuse. Checking the airflow indicator ^ Attach the standard floor brush (depending on model) to the vacuum cleaner.
How to change the dustbag ^ Lift the release button for the dust compartment lid and raise the lid until it clicks into place. The dustbag has a closing flap which closes automatically when the dust compartment lid is raised to prevent any dust from escaping.
When to change the exhaust filter Your model will have either the: a Air Clean An Air Clean filter is supplied with every box of Miele dustbags and should be changed when starting a new box of dustbags. b Active Air Clean SF-AAC 50 (black) c Active HEPA SF-AH 50 (blue) These filters should be changed approximately once a year.
Exhaust filter change indicator Some models are equipped with an exhaust filter change indicator (Reset button) which is designed to alert the user when to change the "Active Air Clean" or "Active HEPA" filter. The indicator will light after about 50 hours of operation which is equivalent to a year of average use.
Replacing the "Air Clean" filter ^ Open the dust compartment lid. ^ Open the filter frame until it locks into place and remove the used "Air Clean" filter by the clean corner (see arrow). Do not use more than one filter at a time. ^ Insert the new filter (either way up).
Replacing the "Active Air Clean" filter and the "Active HEPA" filter ^ Open the dust compartment lid. Do not use more than one filter at a time.
Exchanging Exhaust Filters Your model can have either: a Air Clean b Active Air Clean SF-AAC 50 (black) c Active HEPA SF-AH 50 (blue) Please note 1. If you wish to replace the a Air Clean filter with the b ACTIVE air clean filter or the c Active HEPA filter, you must remove the filter frame before inserting the new type of filter.
When to change the dust compartment filter Change the filter each time you open a new box of genuine Miele dustbags. A filter is supplied with every box of Miele dustbags. How to change the exhaust filter ^ Open the dust compartment lid. ^ Lift the filter frame and remove the used exhaust filter at the clean side (see arrow).
When to change the thread catcher The thread catcher pads on the bottom of the standard floor brush and the upholstery tool should be replaced as soon as they appear worn. Changing the thread catcher ^ Use a knife or similar object to remove the thread catcher pads from the slots.
, Turn off the vacuum and unplug it from the outlet before performing any maintenance work. Vacuum cleaner and accessories The vacuum cleaner and other plastic accessories can be cleaned with a damp cloth or a cleaner suitable for plastics. , Do not use abrasive, glass or all purpose cleaners! They will damage the surface.
What if the vacuum turns off automatically or a warning light , comes on? The vacuum has overheated. The temperature limiter automatically turns the vacuum off. Some models also have a warning light , which comes on to indicate that the vacuum has overheated.
In the event of a fault which you cannot fix yourself please contact the Miele Service Department at the phone number on the back of this booklet. ^ Please quote the model type of your appliance. This can be found on the data plate on the bottom of the vacuum.
Some models come equipped with one or more of the following accessories. Powerbrushes Observe the cleaning instructions of the floor manufacturer. Models designed for use with a Powerbrush have a release button on the cover cap to the connection socket.
Powerbrush SEB 236 (EB01) This Powerbrush is 3" (60 mm) wider and more powerful than the SEB 217-3 model. It includes: – a height adjustment – a light – a multifunction indicator. Turbobrush - Turbo Comfort-3 Observe the cleaning instructions of the floor manufacturer.
Floor brush - Hardfloor-3 To vacuum sturdy hard floors, e.g. tiles and stone floors. Floor brush - Parquet-3 Special brush with natural bristles intended for cleaning parquet and laminate floors, especially those susceptible to scratching. The parquet floor brush can be cleaned with the vacuum cleaner using the crevice nozzle if necessary.
Universal brush For dusting books, shelves, etc. Radiator brush (only usable with the crevice nozzle) For cleaning radiators, narrow shelves and crevices.
Mattress tool For cleaning deep crevices, mattresses and upholstery. Crevice nozzle 12" (300 mm) For cleaning in folds, crevices and corners. Optional accessories 39 www.
MicroSet This set is specially designed for cleaning small objects and difficult to reach areas (such as PC keyboards, stereo equipment, carved furniture, ornaments, models, etc).
Active Air Clean filter (black) A special active charcoal filter which absorbs odors from the dust collected in the dustbag, helping to prevent odors. The "ACTIVE air clean filter" can be used in place of the existing exhaust filter.
Disposal of packing materials The cardboard box and packing materials protect the appliance during shipping. Ensure that any plastic wrappings, bags, etc. are disposed of safely and kept out of the reach of children. These items pose a danger of suffocation.
43 www.sylvane.com 1-800-934-9194.
M.-Nr. 07 915 310 / 00 Alteration rights reserved / 4210 INFORMATION IS SUBJECT TO CHANGE. PLEASE REFER TO OUR WEBSITE TO OBTAIN THE MOST CURRENT PRODUCT SPECIFICATIONS, TECHNICAL & WARRANTY INFORMATION.
Ein wichtiger Punkt beim Kauf des Geräts Miele S 5281 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Miele S 5281 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Miele S 5281 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Miele S 5281 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Miele S 5281 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Miele S 5281 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Miele S 5281 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Miele S 5281. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Miele S 5281 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
