Benutzeranleitung / Produktwartung S 2001 des Produzenten Miele
Zur Seite of 32
Operating Instructions Vacuum Cleaner S 2001 To prevent accidents and machine damage, read these instructions before installation and use. M.-Nr. xx xxx xxx e n-U S HS12.
2.
IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Guide to the vacuum cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Before using the vacuum cleaner . . . . . .
When using an electrical appliance, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE WARNING- To reduce the risk of fire, electric shock or injury: Before Using ~ Check the voltage rating of the vacuum cleaner before connecting the power cord to an electrical outlet.
Use ~ Do not use on people or animals. ~ Do not use outdoors or on wet surfaces. Only dry surfaces should be vacuumed. ~ Use only as described in this manual. Use only Miele recommended accessories described in this manual. ~ This appliance is intended strictly for household use only.
~ Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts. ~ Do not place anything into the openings of the vacuum. Do not use if any openings are blocked; keep them free of dust, lint, hair or anything that may reduce air flow.
Cleaning, maintenance and repairs ~ Turn the vacuum cleaner off after each use and before every cleaning / maintenance. Pull the plug from the outlet. ~ Never submerge the vacuum cleaner in water. Clean only with a dry cloth or slightly damp cloth when disconnected from the mains supply.
Guide to the vacuum cleaner 8.
a Hand piece b Air inlet valve c Lock release button d Telescopic wand e Hose connector f Telescopic wand release button g Dust compartment lid release h Suction power selector i Floor brush * j Carry.
Connecting the hose a ^ Insert the hose connector in the suction socket until it clicks into place. Disconnecting the hose b ^ Press the release buttons at the sides of the hose connector and lift the hose from the socket. Connecting the hand piece and wand ^ Insert the hand piece into the wand until it clicks into place.
Using the standard floor brush (depending on model) Observe the cleaning instructions of the floor manufacturer. The floor brush is suitable for cleaning carpets, rugs, carpeted stairs and hard surfaces that are not susceptible to scratching.
The following accessories are included: a Dust brush with natural bristles b Upholstery tool c Crevice nozzle d Accessory clip for the included accessories Position the accessories as indicated. Accessory clip ^ Press the accessory clip either above the hose connector or below the suction hose.
Attaching the floor tool/brush ^ Insert the wand into the floor brush and twist until it locks with a click. ^ To release the floor brush from the telescopic wand, press the locking button (see arrow) and pull the wand out of the floor brush. Observe the cleaning instructions of the floor manufacturer.
Power cord , Unwind the cord completely to aid the vacuum in dissipating heat. Do not pull or carry by the cord, use the cord as a handle, close a door on the cord, or pull the cord around sharp edges or corners. Do not run the appliance over the cord.
Turning the vacuum On/Off ^ Press the On/Off foot switch s . , To prevent static electricity your hand must touch the metal inlay on the underside of the vacuum hand piece. Be certain to continuously touch this inlay when vacuuming fine dust, flour or sawdust as these materials are more likely to create a static discharge.
Adjusting the suction You can adjust the suction power to suit the type of flooring. By reducing the suction power the floor brush can be pushed easier.
Park-System (Cannot be used with the Powerbrush SEB 228 / EB03.) The Park system allows you to conveniently park the wand and floor brush on the vacuum cleaner during brief pauses. ^ Insert the lower clip on the floor brush into the slot on the end of the vacuum cleaner from above.
, Turn off and unplug the vacuum cleaner before performing any maintenance work. The Miele filter system consists of the following three components. – Dustbag – Exhaust filter – Dust compartment filter Each of these components must be changed periodically to maintain the vacuum cleaner’s efficiency.
When to change the dustbag Change the dustbag when the colored marker in the airflow indicator fills the display. Miele dustbags are disposable and made to be used only once. Do not attempt to reuse. Checking the airflow indicator ^ Attach the floor brush to the vacuum cleaner.
Replacing the dustbag ^ Open the dust compartment lid and raise until it clicks into place. The dustbag has a closing flap which closes automatically when the dust compartment lid is raised to prevent any dust from escaping. ^ Grasp the finger grip and pull a the dustbag out of the holder.
When to change the dust compartment filter (Pre-motor filter) Change the filter each time you open a new box of genuine Miele dustbags. A dust compartment filter is supplied with each box. Replacing the dust compartment filter (Pre-motor filter) ^ Open the dust compartment lid.
Exchanging exhaust filters Depending on the model, there may also be an Active HEPA exhaust filter included which can be used instead of the standard Air Clean exhaust filter. In order to use the Active HEPA filter the Air Clean filter and filter frame must be removed.
When to change the thread catcher on the standard floor brush (depending on model) The thread catcher on the floor brush should be replaced as soon as they appear worn.
, Turn off the vacuum and unplug it from the outlet before performing any maintenance work. Vacuum cleaner and accessories The vacuum cleaner and other plastic accessories can be cleaned with a damp cloth or a cleaner suitable for plastics. , Do not use abrasive, glass or all purpose cleaners! They will damage the surface.
, Turn off and unplug the vacuum cleaner before performing any maintenance work. What if the vacuum turns off automatically? The vacuum has overheated. The temperature limiter automatically turns the vacuum off. This can occur if, for instance, large articles block the suction tube or when the filter bag is full or contains particles of fine dust.
Powerbrush Observe the cleaning instructions of the floor manufacturer. The Powerbrush can only be used with models containing a Powerbrush socket, see "Guide to the Vacuum Cleaner".
Turbobrush Turbo Comfort - 3 The Turbobrush is intended for cleaning short to medium pile carpeting. It is mechanically driven by the suction power of the vacuum. In addition to dust particles it also removes stubbornly adhered threads, hairs, fluff, etc.
After sales service In the event of a fault which you cannot fix yourself please contact the Miele Service Department at the phone number listed on the back of this booklet. ^ Please quote the model type of your appliance. This can be found on the data plate on the bottom of the vacuum.
Disposal of packing materials The cardboard box and packing materials protect the appliance during shipping. Ensure that any plastic wrappings, bags, etc. are disposed of safely and kept out of the reach of children. These items pose a danger of suffocation.
30.
31.
M.-Nr. xx xxx xxx / 00 Alteration rights reserved / S2 without electro accessories / xx10 INFORMATION IS SUBJECT TO CHANGE. PLEASE REFER TO OUR WEBSITE TO OBTAIN THE MOST CURRENT PRODUCT SPECIFICATIONS, TECHNICAL & WARRANTY INFORMATION.
Ein wichtiger Punkt beim Kauf des Geräts Miele S 2001 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Miele S 2001 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Miele S 2001 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Miele S 2001 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Miele S 2001 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Miele S 2001 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Miele S 2001 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Miele S 2001. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Miele S 2001 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
