Benutzeranleitung / Produktwartung KF 9757 iD des Produzenten Miele
Zur Seite of 64
Operating and installation instructions Fridge-freezer with PerfectFresh zone and Dynamic cooling KF 9757 iD To avoid the risk of accidents or damage to the appliance, it is essential to read these instructions before it is installed and used for the first time.
Guide to the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Caring for the environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Warning and Safety instructions .
Adjusting the interior fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Moving the shelves ................................................2 8 Split shelf .......................................................
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 Location .........................................................4 6 Climate range ...........................................
a On/Off button for switching the refrigerator section / PerfectFresh zone on and off separately. b Refrigerator section temperature display c Refrigerator section temperature selector buttons (+ for .
a Fan for Dynamic cooling b Adjustable shelves c PerfectFresh zone, dry compartment d Control for setting the moisture level in the humidity controlled compartment e PerfectFresh zone, humidity contro.
Disposal of the packing material The transport and protective packing has been selected from materials which are environmentally friendly for disposal, and should be recycled. Ensure that any plastic wrappings, bags etc. are disposed of safely and kept out of the reach of babies and young children.
This appliance complies with all relevant legal safety requirements. Improper use of the appliance can, however, present a risk of both personal injury and material damage. To avoid the risk of accidents and damage to the appliance, please read these instructions carefully before installation and before using it for the first time.
Technical safety ~ Before setting up the appliance, check it for any externally visible damage. Do not install and use a damaged appliance. ~ This appliance contains the coolant Isobutane (R600a), a natural gas which is environmentally friendly.
~ Safe operation of the appliance is only assured if it has been installed and connected in accordance with these operating and installation instructions. ~ This equipment may only be used in mobile installations such as ships, caravans, aircraft etc.
~ Do not store explosive materials in the appliance or any products containing propellants (e.g. spray cans). Thermostats switching on may produce sparks which could present a fire hazard. Flammable compounds could explode. ~ Do not operate any electrical equipment (e.
~ The appliance is designed for use within certain climate ranges (ambient temperatures), and should not be used outside this range. The climate range for your appliance is stated on the data plate inside the appliance. Installing it in a room with too low an ambient temperature, e.
Normal energy consumption Increased energy consumption Installation site In a ventilated room. In an enclosed, unventilated room. Protected from direct sunlight. In direct sunlight. Not situated near to a heat source (radiator, oven). Situated near to a heat source (radiator, oven).
Before using for the first time The stainless steel trim to the interior shelves and the door shelves has a layer of protective foil to prevent scratching during transportation.
Switching off ^ Press the master switch on the right hand side of the control panel until both temperature displays go out. The cooling system is switched off.
^ Press the master switch on the right hand side of the control panel to come out of the setting mode. If you do not do this, the electronics will switch over to normal operation automatically after a couple of minutes. Switching off for longer periods of time If the appliance is not going to be used for a longer period of time, e.
It is very important to set the correct temperature for storing food in the appliance. Micro-organisms will cause food which is not stored at the correct temperature to deteriorate rapidly. Temperature influences the growth rate of these micro-organisms.
Setting the temperature in the refrigerator section / freezer section Use the two buttons underneath the respective temperature displays to set the temperature for the refrigerator and freezer sections. Press the + button: to raise the temperature (it gets warmer) – button: to reduce the temperature (it gets cooler).
^ Press one of the temperature selector buttons repeatedly until a = appears in the display. Then press the Super freeze button again. = lights up in the display. ^ You can now adjust the temperature in the PerfectFresh zone by pressing the temperature selector buttons.
Temperature display brightness The appliance is supplied with the brightness of the temperature display set as low as possible. However, if the door is opened, a setting changed or if the alarm is sounding, the temperature display will appear much brighter for approx.
Your appliance has been fitted with a warning system which ensures that the temperature in the freezer section cannot rise unnoticed. An alarm will sound and at the same time the temperature display for the freezer section will flash if the temperature becomes too warm.
Super cool The Super cool function can be used to rapidly reduce the temperature in the refrigerator section to its lowest setting (depending on the room temperature). Switching on Super cool Super cool is particularly recommended for the faster chilling of large amounts of fresh food or drink.
Switching off Super freeze Depending on the amount of food placed in the freezer section, the Super freeze function will switch off automatically after approx. 30 to 60 hours. The Super freeze indicator light will go out and the appliance will continue running at normal power.
Different storage zones Due to the natural circulation of the air in the appliance, there are different temperature zones in the refrigerator. Cold, heavy air sinks to the lowest section of the appliance. Make use of the different zones when placing food in the appliance.
Food which should not be stored in a refrigerator Not all food is suitable for refrigeration. This includes: – Fruit and vegetables which are sensitive to cold, such as bananas, avocado, papaya, passion fruit, aubergines, peppers, tomatoes and cucumbers – Fruit which is not yet ripe – Potatoes – Some hard cheeses, e.
For every type of food, there are ideal storage conditions to ensure it stays fresh as long as possible, retaining both flavour and vitamins. The important factors for this are the storage temperature and the humidity. The correct combination of temperature and humidity is a unique feature of the PerfectFresh zone.
Always keep these foods covered or wrapped . Exception: Meat. The surface of the meat dries out slightly, helping to prevent the growth of bacteria, which results in the meat lasting longer. To prevent the risk of bacterial cross-contamination and meat deteriorating, do not let one type of meat come into direct contact with another type.
Moving the shelves The shelves can be adjusted according to the height of the food. ^ Raise the shelf, and pull it forwards slightly until the notch at the side is in line with the shelf support. It can then be raised or lowered to the required level.
^ Carefully pull out the lid between the compartments slightly, and lift it down and out. ^ To replace it, insert the compartment lid from beneath into the holders, and push it back into place. To replace the compartment, ^ place it back on the fully extended runners a .
Maximum freezing capacity To ensure that fresh food placed in the freezer freezes through to the core as quickly as possible, the maximum freezing capacity must not be exceeded. The maximum freezing capacity for freezing within a 24-hour period is given on the data plate: "Freezing capacity .
Home freezing Only freeze fresh food which is in a good condition. Hints on home freezing – The following types of food are suitable for freezing: Fresh meat, poultry, game, fish, vegetables, herbs, fresh fruit, dairy products, pastry, leftovers, egg yolks, egg whites and a range of pre-cooked meals.
Before placing food in the freezer section ^ When freezing more than 2 kg of fresh food, switch on the Super freeze function for some time before placing the food in the freezer (see "Super freeze"). This also helps to prevent food that is already in the freezer from starting to defrost.
Defrosting Frozen food can be defrosted in different ways: – in a microwave oven, – in an oven using the "Fan" or "Defrost" setting, – at room temperature, – in the refrigerator (the cold given off by the frozen food helps to keep the other food cold), – in a steam oven.
Freezer tray The freezer tray is useful for freezing small items such as berries, herbs and vegetables. They can be frozen individually and therefore maintain their shape when defrosted. ^ Space the food out loosely on the tray. ^ Hang the tray in the top freezer drawer.
Refrigerator and PerfectFresh zone The refrigerator and the PerfectFresh zone defrost automatically. Condensate and frost can build up on the back wall of the refrigerator section and the PerfectFresh zone whilst in use. You do not need to remove this, as it will defrost and evaporate automatically with the warmth generated by the refrigerator.
To speed up defrosting, two bowls of hot water (not boiling) with plates underneath them can be placed in the appliance. Closing the door in this instance will help retain warmth and speed up the defrosting process. We do not recommend the use of hot air blowers such as hairdryers for defrosting your freezer.
Never use cleaning agents containing abrasive substances such as sand, soda, acids chlorides or chemical solvents. "Non-abrasive" cleaning agents are also unsuitable as they can cause matt areas to appear.
^ Clean stainless steel surfaces with a suitable, non-abrasive, proprietary stainless steel cleaning agent, following the manufacturer’s instructions on the packaging. ^ After cleaning, stainless steel surfaces should always be treated with a conditioning agent for stainless steel.
Repairs to electrical appliances should only be carried out by a suitably qualified and competent person in strict accordance with current local and national safety regulations. Repairs and other work by unqualified persons could be dangerous. The manufacturer cannot be held liable for unauthorised work.
. . . the compressor is switching in too frequently and for too long. ^ Check whether the ventilation gaps in the plinth and in the housing unit at the top have been covered over or become too dusty. ^ The doors have been opened too frequently, or a large amount of fresh food has been put in at once for freezing.
. . . bars light up or flash in the temperature displays. Check the temperature displays about 6 hours after switching on the appliance. Only temperatures within the range the appliance can display will be shown. ..." F0 "t o " F5 " in one of the temperature displays appears.
. . . the interior lighting in the refrigerator section is not working. Has the refrigerator door been left open for too long? The lighting switches itself off automatically after approx. 15 minutes. If it also does not come on when the door is opened briefly, but the temperature display is working, then the lighting is defective.
Normal noises What causes them Brrrrr... Humming noise made by the motor (compressor). This noise can get louder for brief periods when the motor is switching on. Blubb, blubb.... A gurgling noise can be heard when coolant is circulating through the pipes.
In the event of a fault which you cannot correct yourself, or if the appliance is under guarantee, please contact: – your Miele Dealer or – Miele (see back cover for contact details). When contacting your Dealer or Miele, please quote the model and serial number of your appliance.
Electrical connection U.K. All electrical work should be carried out by a suitably qualified and competent person in strict accordance with current local and national safety regulations (BS 7671 in the UK). The appliance is supplied with a mains cable and moulded plug ready for connection to an a.
To avoid a hazard due to instability of the appliance, it must be installed in accordance with these instructions. Location The appliance should be installed in a dry, well ventilated room. The room temperature should not go above or below the climate range for which the appliance is designed.
Ventilation Air at the back of the appliance gets warm. The appliance housing unit must be constructed to allow sufficient space for ventilation. A ventilation gap of at least 38 mm depth must be allowed for behind the appliance for air to circulate.The air inlet to the appliance is via the plinth in the housing unit.
Freezer section height Niche height AB KF 9757 iD 549 1772 - 1788 Building-in dimensions 48.
The door hinges are set ex-works to enable the doors to be opened wide. However, if the opening angle of the doors needs to be limited for any reason, the hinges can be adjusted to accommodate this. – For example, if the appliance doors hit an adjacent wall when opened, the opening angle can be limited to 90°.
Before building the appliance in, you will need to decide on which side the door is to be hinged. If left hand door hinging is required, follow the instructions below. To change the door hinging you will need the following tools : – a cross-slotted screwdriver, – a flat-bladed screwdriver, – a selection of Torx screwdrivers, – a spanner.
^ Undo ball joint d using a spanner and remove it. ^ Stand the appliance doors up one by one, and slacken the hinges at the front (the hinges remain open). ^ Remove caps a from the top and bottom of each door (if the caps are not in place, they will have been supplied separately with the appliance).
^ Hang the doors onto the pre-fitted screws, and push the doors inwards. ^ Tighten the screws at the top, middle and bottom securely. ^ Replace covers a , b and c . ^ Then replace caps d in the vacant holes. ^ Replace the locking pins into the top of the hinges to prevent the doors opening too far.
All fitting instructions given are for a right hand hinged appliance. If you have converted the appliance to left hand hinging you will need to adapt these instructions accordingly. To install the appliance you will need the following : – a cross-slotted screwdriver, – a selection of Torx screwdrivers, – a hexagon spanner.
Preparing the appliance ^ Slide cover strip a into the holder as shown, with the bumps facing downwards. The bumps will fit into keyhole slots b . ^ Position the mains electricity cable so that the appliance can be connected easily once installed.
^ Open both appliance doors. ^ Using a screwdriver, remove cover g from the top corner of the appliance. ^ Fit cover h onto fixing bracket i . ^ Secure fixing bracket i to the top of the appliance with screws j (M5 x 15). ^ Fit cover k onto fixing bracket l .
Building in the appliance – With 16 mm thick walls: The spacers should touch the front edge at the top and bottom of the side walls of the housing unit, detail a . – With 19 mm thick walls: The front edges of the top and bottom hinges sit flush with the front edge of the housing side walls, detail b .
Securing the appliance in the niche ^ Press the appliance against the housing unit on the hinge side. ^ To fix the appliance to the housing unit at the top and bottom, screw the l o n g4x2 0m m chip board screws a into the hinges at the top and bottom.
^ Break off the protruding end of bottom cover e . It is no longer required. ^ Fit angled cover g onto bottom fixing bracket c . ^ Close the appliance doors. Fitting the furniture doors ^ A gap of 8 mm a must be set between the appliance door and the central fixing bracket.
^ Hang the furniture door onto adjusting bolts h . ^ Loosely attach nuts c on the adjusting bolts. ^ Close the door and check the distance between the door and neighbouring furniture doors.
^ Close both of the doors, and align them with the neighbouring furniture doors. ^ Whilst counterholding adjusting bolts g with a screwdriver, tighten nuts a on the appliance doors with ring spanner f . ^ Cover strip h must be completely hidden in the niche, and must not protrude.
To make sure the appliance is correctly fitted: – The doors must close properly. – The doors must not touch the housing unit. – The seals at the top edge of the handle side must fit properly. ^ To double check place a torch in the appliance and close the doors.
62.
63.
Alteration rights reserved / 2610 KF 9757 iD M.-Nr. 07 472 710 / 03.
Ein wichtiger Punkt beim Kauf des Geräts Miele KF 9757 iD (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Miele KF 9757 iD noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Miele KF 9757 iD - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Miele KF 9757 iD reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Miele KF 9757 iD erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Miele KF 9757 iD besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Miele KF 9757 iD verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Miele KF 9757 iD. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Miele KF 9757 iD gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
