Benutzeranleitung / Produktwartung G 7827 des Produzenten Miele
Zur Seite of 48
Operating and Installation Instr uctions Labor ator y Glass w are W asher G 7827 / G 7828 T o prevent accidents and machine damage read these instructions before installation or use.
2.
IMPORT ANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Description of the machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Opening and closing the lift door . . .
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Maintenance and care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Process validation .
This machine conforms to current safety requir ements. However , inappropriate use can lead to personal injury and property damage. Read the operating instructions carefully befor e using this machine. The manufacturer cannot be held responsible for damage caused by non-observance of these Important Safety Instructions.
T ake care when handling liquids such as detergents, neutralizing agents, wetting agents and rinse aids. These may contain irritant or corrosive ingredients, acids or alkalis. Never use any organic solvents, as the danger of explosion exists. Wear pr otective gloves and goggles.
The follo wing points should be observed to assist in maintaining quality standards, f or critical lab glassware, to protect patients, and to av oid damage to the loads being cleaned. Use only Miele approved cleaning agents with this machine. Use of unsuitable cleaning agents could adversely affect the components of the machine.
The mobile units and special inserts should only be used for their specific application. Empty any containers or utensils before arranging them in the machine. Do not allow any remains of acids, solvents or corroding ferr ous material, and in particular hydrochloric acid or chloride solutions to get into the wash cabinet.
The Miele G 7827/G 7828 Large Capacity Glassware W asher is designed for high-throughput, centralized wash areas. This unit is ideal for cleaning both large volumes of small items, and difficult to clean large items.
Electronic contr ols Description of the machine 10.
a Display with screen saver The background light turns off automatically after 15 minutes. ^ Press any key to turn the background light on again. b On/Off button (I-0) c Cursor left 1 moves the cursor.
Unclean side a Drying unit (T A) b Steam condensor (DK) behind top housing (Optional) c Electronic cir cuit board "Profitr onic" (see "Programming manual") d Controls e Power switc.
Unclean side a Lift door (open) b Filter combination c Containers for dosage system DOS 1 - DOS 4 Description of the machine 13.
Clean side (G 7828 only ) a "Door" button b Lift door (closed) c Printer (optional) G 7827 on the unclean side d Service panel with adapter for "Miele transfer" cart Description of.
The lift door can only be opened when: – the lab glassware washer is connected to the electrical supply , – the red ("emergency cut of f") switch is in the I-ON position, – the I-0 On-Off button is pr essed in, and – no program is running.
In operating level C the A WK (optional) attributes a fixed program place to a mobile unit with valid coding. Program places 1-15 ar e reserved for the A WK automatic mobile unit recognition.
Mobile unit coding strip 15 differ ent codes can be set. They are assigned to program places 1 to 15. Under "System function - Selector switch organization" the matching programs have to be put into the first 15 program places.
^ Set the program place coding. ^ Put the magnetic strip back in the track. Important: The magnetic strip must be placed in the track so that the Bit coding, set according to the chart, is visible through the r ound windows of the track. ^ Place the track in the holder of the mobile unit and screw firmly in place.
The machine can be fitted with a variety of mobile units, baskets and inserts, depending on the cleaning application desired. Check bef ore cleaning – Are the items to clean corr ectly sorted, loaded and connected? – Are the spray arms clean and can they rotate fr eely? – Is the filter combination free of coarse soiling? Clean if necessary .
Loading tips Select mobile units, baskets and inserts appropriate for the application. ^ Load the items to be washed so that water can access all surfaces. This ensures that they will be pr operly cleaned. ^ Do not place items to be cleaned inside other pieces where they may be concealed.
Laboratory glassware (LG) Wide-necked glassware, such as wide necked erlenmeyer flasks and petri dishes or glassware with a cylindrical form, e.g. test tubes, can be cleaned inside and out with the rotating spray arm. General glassware such as beakers, conical flasks, petri dishes, test tubes, etc.
, Use only cleaning detergents and neutralizers specially designed for lab washers and regar d the application recommendations of the manufacturer . This automatic cleaning machine is fitted with 4 dispensers: – Dispensing system DOS 1 (blue) to dispense liquid detergent.
Filling the containers with liquid agents ^ T ur n the machine off using the power switch. ^ Open the service panel and lift it up and out at the bottom. ^ T ake the storage container out of the unit, open it and fill with the agent requir ed (observe the color code).
Priming the liquid dispensing systems Before the machine is first used, and later if one or more containers have been allowed to empty , the dispensing system(s) for liquid agents must be primed. ^ Press the ON/OFF I-0 button. ^ Select operating level "B".
T urning on ^ Open the water supply (if turned off). ^ T ur n the power switch to I-On . ^ Press the ON/OFF I-0 button in. In operating levels A, B and D the most recently selected PROGRAM NAME appears and in operating level C "AUTOMA TIC MOBILE UNIT RECOGNITION" is displayed.
Starting a program Y ou can find detailed and impor tant information regarding the Miele default programs in the pr ogram chart of the supplied Programming Manual. A. Fixed program T o utilize access level "A", fixed programs must be assigned for access.
C. Automatic mobile unit recognition (A WK) ^ Select operating level "C". ^ Push the coded mobile unit into place. Make sure that no small metallic items (e.g. keys) stick to the magnetic strip or its underside. The coding might be not readable.
Cancelling a program A program can only be interrupted or cancelled in the operating levels B or D. In operating levels B or D ^ Press the "Stop" 7 button. The program is interrupted. >CANCEL< OR >CONTINUE< appears in the display .
Interrupting a program A program can only be interrupted or cancelled in operating levels B or D. If the door needs to be opened in extreme cases, e.g. if items ar e moving: In operating levels B or D ^ Press the "Stop" 7 button. The program is interrupted.
Each machine is supplied with a 16’ 5" (5 m) long interface cable for data transfer between the Profitr onic system and an external report printer or PC. The interface cable is rolled up inside the machine and must only be connected by a Miele Service T echnician.
Maintenance and care It is recommended that periodical maintenance for this washer be carried out by Miele’ s T echnical Service Department after 1000 operating hours or every 6 months.
Process v alidation The standard of cleaning pr ocesses must be ensured by the user as a routine matter . Routine chec ks The routine checks must be done daily by the user before using the machine.
Cleaning the filters in the wash cabinet The filter combination in the base of the wash cabinet should be inspected regularly and cleaned if necessary . , The machine must not be used without all the filters in place. , Be aware of glass splinters, danger of injury .
Cleaning the spray arms The spray arm jets can get clogged. Check daily and clean if necessary . ^ Use a sharp pointed object to push particles into the spray ar m jets and rinse thoroughly under running water .
Cleaning the control panel ^ Clean the control panel with a damp cloth or with a glass/plastic cleaner . T o disinfect use an approved cleaning agent. , Do not use abrasive or all purpose cleaners! They will damage the surface.
Mobile units, baskets and inserts T o ensure the pr oper function of mobile units, baskets and inserts, they must be checked daily . A checklist is supplied with the machine.
Report printer (Option) Replacing the print paper Replace the print paper , 2 ¼" (58 mm) wide, when the red indicator lights in the report printer . ^ Open and pull down the front panel of the printer . ^ T ake the empty roll together with its spindle from the r oll holder , fit the new roll on the spindle and put it back in place.
Should you have any difficulties please contact the Miele T echnical Service Department. See back cover for contact information. ^ Please quote the model and serial number of your machine. This information can be found on the data plate (see also "Electrical connection").
INST ALLA TION INSTR UCTIONS.
Steam/Electro or Electr o/Steam con version If the machine is convertible, the heating type can be changed in the service program fr om STEAM>>ELECTRO to/from ELECTRO>>STEAM. ^ Select program STEAM>>ELECTRO or ELECTRO>>STEAM (see "Operation - B.
All electrical work must be carried out by a qualified electrician in accordance with local and national safety regulations. – Installation, repairs and other work by unqualified persons could be dangerous. The manufactur er can not be held responsible for unauthorized work.
W ater connection This machine must be connected to the water supply in accordance with all national and local plumbing codes. , W ater in the machine is not suitable f or drinking. The washer is constructed so that it may be connected to a water supply without an extra non-return valve, unless requir ed by code.
Requirements (refer to the Installation Diagram f or more information) 1. Cold water connection One 1 / 2 " (13 mm) cold water supply line with a standard 3 / 4 " (19 mm) male hose thread faucet is needed. The cold water supply hose is marked with blue tape.
Height: 98 7 / 16 " (250 cm) (minimum room height) Width: 45 ¼" (115 cm) Depth: 34 ¼" (87 cm) Weight (net): approx. 1,210 lbs (550 kg) Operating weight approx.
Disposal of the packing materials The cardboar d box and packing materials protect the appliance during shipping. They have been designed to be biodegradable and recyclable. Ensure that any plastic wrappings, bags, etc. are disposed of safely and kept out of the reach of childr en.
46.
47.
All rights reserved / 3706 M.-Nr . 06 190 411 / 01 en - US/CDN.
Ein wichtiger Punkt beim Kauf des Geräts Miele G 7827 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Miele G 7827 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Miele G 7827 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Miele G 7827 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Miele G 7827 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Miele G 7827 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Miele G 7827 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Miele G 7827. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Miele G 7827 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
