Benutzeranleitung / Produktwartung CVA 3650 des Produzenten Miele
Zur Seite of 68
Operating and installation instructions Coffee machine CVA 3650 To avoid the risk of accidents or damage to the machine, it is essential to read these instructions before it is installed and used for the first time.
Caring for the environment ..........................................5 Guide to the machine ..............................................6 Warning and safety instructions .....................................8 Brief description ......................
Settings: Customising your machine ................................2 3 Settings menu ....................................................2 3 Selecting a language ...............................................2 4 Setting the time of day ..............
Cleaning and care ................................................4 2 Rinsing ..........................................................4 2 Water container ...................................................4 3 Waste container ........................
Disposal of the packing material The transport and protective packing has been selected from materials which are environmentally friendly for disposal, and can normally be recycled. Ensure that any plastic wrappings, bags, etc. are disposed of safely and kept out of the reach of babies and young children.
Exterior view a On/Off sensor for switching the coffee machine on and off b Display c Left arrow sensor, for scrolling through the various programme options d OK sensor, for confirming the selection o.
Interior view m Master switch n Capsule plate (replaced with the descaling funnel when descaling is carried out) o Brew unit p Capsule carousel q Carousel runners r Water container s Drip tray with gr.
This machine conforms with all relevant legal safety requirements. Improper use can, however, lead to personal injury and damage to property. To avoid the risk of accidents and damage to the machine, please read these instructions carefully before using it for the first time.
~ The electrical safety of this machine can only be guaranteed when continuity is complete between it and an effective earthing system which complies with local and national safety regulations.
~ If the coffee machine is to be built in above another appliance, there must be a full-width, closed shelf between them (except when it is combined with a Miele built-in plate warming drawer).
~ Water in the drip tray can be very hot. Take great care when emptying it. Danger of scalding. ~ The machine should be descaled regularly, depending on the hardness of the water, with the descaling tablets supplied. The harder the water, the more often the machine must be descaled.
The capsule carousel can hold up to 20 coffee capsules. These 20 coffee capsules are divided between 5 chambers. This means that the capsule carousel can be filled with 5 different types of coffee . These 5 different types are programmed into the machine so that the type required can be selected from the display.
The following notes should help you get to know your coffee machine before starting to use it. Controls This machine has sensor controls which react to touch.
When you use the machine for the very first time , you will be prompted to select a language . ^ Touch the right or left arrow until the language you want appears in the display. ^ Touch the OK sensor. The language you have chosen is now set. The request to set the clock format will then appear.
The coffee machine must be cleaned thoroughly (see "Cleaning and care") before you fill it with water and coffee capsules. It is vital that you programme in the water hardness level of your water (see "Customising your machine - Setting the water hardness").
Filling the capsule carousel Do not put anything other than Nespresso coffee capsules in the capsule carousel. Do not use coffee capsules which are damaged, broken, dented or bent up at the edges. They can get stuck in the machine. The capsule carousel has five chambers, each holding four capsules.
Important: the water piping must be rinsed through every day and the machine cleaned thoroughly before the first drink of the day is prepared. Rinsing will take place automatically if the Rinsing programme option has been set to "On" and the machine is cold.
^ Touch the OK sensor once . The drink you want will then run out of the spout. You can programme the size of portion dispensed for espresso and coffee according to taste (see "Programming the amount: Setting the portion sizes").
Do not set the valve between these two settings as this will cause the milk to sputter. Milk can be frothed and dispensed straight into a cup, or heated or frothed in the cappuccinatore jug first and then poured manually into the cup.
The steam valve must engage in the lower position in order to connect properly with the cappuccinatore. ^ When you have enough froth in the cup push the steam valve upwards again. Preparing cappuccino ^ Dispense milk froth into the cup, as described above.
Preparing hot milk ^ Turn the valve on the cappuccinatore anti-clockwise as far as it will go. ^ Fill the cappuccinatore up to the upper marker with cold milk and replace the lid.
User profile drinks With User profiles, you can create drinks to suit your personal taste and those of your guests. If you have set the machine up for a specific user profile you must first select the user profile required and then the type of drink.
It is easy to customise your machine to suit your exact requirements. Settings menu To select the various programme options: Settings F K 1 K 2 K 3 K 4 K 5 L on G k C ^ Touch the right arrow sensor until "Settings F " appears in the display, and then touch the OK sensor.
Maintenance: Carry out (see "Cleaning and care"). Showroom prog.: Demo programme, Off Factory default: All settings can be reset to the factory default, and user profiles deleted. To return to the Main menu, select "Back A ". Further details about the different options can be found in the pages that follow.
Setting the time of day ^ Select "Settings F " from the main menu, and then touch the OK sensor. ^ Touch the right arrow sensor until "Time" is highlighted and touch the OK sensor. Display The Time of day display can be switched on or off.
Setting the timer ^ Select "Settings F " from the main menu, and then touch the OK sensor. ^ Touch the right arrow sensor until "Timer" is highlighted and touch the OK sensor. ^ Select "Set" with the arrow sensors and touch the OK sensor.
^ First set the hour with one of the arrow sensors. Touch the OK sensor. ^ Then use the arrow sensors to set the minutes. Touch the OK sensor. The machine will now switch off after the time you have set.
Setting Automatic rinsing To remove any coffee grounds from the system, the water piping must be rinsed through before the first drink of the day is prepared. If Automatic rinsing is selected, the rinse cycle will take place automatically whilst the machine is still cold when the machine is switched on.
Setting the lighting You can set the coffee machine's indirect lighting: ^ Select "Settings F " from the main menu, and then touch the OK sensor. ^ Touch the right arrow sensor until "Lighting" is highlighted, and then touch the OK sensor.
Setting the water hardness For trouble-free operation of the coffee machine, and to ensure that the descaling reminder appears in the display at the appropriate time, it is important to set the water hardness level. The water hardness level indicates how much calcium is dissolved in the water.
^ Touch one of the arrow sensors to set the water hardness, and then touch the OK sensor. The water hardness level selected is saved to memory. Setting the display You can adjust both the contrast and the brightness of the display: ^ Select "Settings F " from the Main menu, and then touch the OK sensor.
Resetting the factory default settings The "factory default" setting is used to reset the various settings back to the default status. You can then select whether you want to reset All setti.
User profiles You can delete all user profiles except for the standard one under "User Profiles". ^ Select "Reset" under "User profiles", and touch the OK sensor.
There are 12 different types of Nespresso coffee available for use in this machine (as well as occasional "special" brands). They vary in terms of taste, aroma and how they are roasted. Preparation time also affects the taste. Allocating the types of coffee (Allocate type) You can store five different types of coffee in this machine (e.
It is best to take the capsule carousel out of the machine so that you can see which type of coffee you have put into each chamber more easily. Select type ^ Use the arrow sensors to select the type of coffee you want to allocate to the selected chamber and touch the OK sensor.
Change type You can use this option to select the coffee type that you would like to change. ^ Touch one of the arrow sensors to highlight "Change type", and touch the OK sensor. Now proceed as described in "Rename type". – To delete a character, select the bin symbol.
The flavour of the coffee produced depends on the type of coffee, how finely the beans are ground and the quantity of water used. Not all espresso and coffee cups are the same size. To ensure the machine uses the right amount of water to suit your taste and your cups, you can programme the amount to use.
Programming the amount via "Settings" ^ Place the appropriate cup for the amount you want to programme under the coffee spout. ^ Select "Settings F " from the Main menu, and then touch the OK sensor. Both coffee and espresso will appear in the display.
To cater for different tastes and preferences, you can enter up to 9 individual User profiles. Each User profile can also be allocated its own portion size.
^ Use the arrow sensors to select the character you require. ^ Confirm the character by pressing the OK button. The characters you have chosen will appear in the top line of the display. If you make a mistake , use the arrow sensors to select the bin symbol and touch the OK sensor.
Revert You can programme the machine so that it reverts to the Standard User profile after you have made each drink, or so that it continues to operate using a User profile you have set. To set the profile to be used: ^ Select "Revert" with one of the arrow sensors.
Miele branded cleaning and conditioning products are available from the Miele Spare Parts Department or via the internet on www.miele- shop.com. Always allow the machine to cool down before cleaning. Please be aware that the water in the drip tray will be hot.
Water container Empty the water container daily and fill with fresh, cold tap water just before use. When cleaning, make sure that there is no soiling in the area around the valve. Otherwise the container will not sit correctly and this could result in water leaking from the machine.
Drip tray There is a sensor in the drip tray which causes a message to appear in the display when the drip tray is full and needs to be emptied. Remove the tray and empty and clean it when this message appears. However, to avoid a build-up of odours, the drip tray should be cleaned every day .
Grille with drip tray cover ^ Take the grille and drip tray cover out and wash them. The plastic grille must only be washed by hand. Capsule carousel and carousel runners ^ Pull the carousel runners a out as far as possible. ^ Remove the capsule carousel b by pulling it upwards.
Coffee outlet cover ^ Open the front of the machine. ^ Push up the cover in the middle of the machine front. ^ Clean the cover with a mild solution of hot water and washing up liquid or in the dishwasher, then dry it. Also clean the inside of the machine front with a mild solution of hot water and washing-up liquid and dry it.
Capsule plate How quickly the capsule plate becomes soiled will depend on the content of natural oils in the coffee used. It should be cleaned whenever the machine is descaled or more often if necessary using the cleaning tablets supplied with the machine.
Cappuccinatore (milk frother) The cappuccinatore can be dismantled into several parts to clean it properly. It is very important to clean the parts thoroughly as otherwise the froth will not be produced properly, if at all. It is best to clean the cappuccinatore in a dishwasher - all parts are dishwasher- safe.
Machine front If soiling is not removed promptly it could cause the surface of the machine to alter or discolour. Remove any soiling immediately. ^ Switch the machine off with the On/Off button. ^ Clean the front using a damp Miele microfibre E-cloth or with a clean sponge and a solution of hot water and washing-up liquid.
Maintenance The capsule hopper in the brew unit needs to be replaced after about 15,000 cups of coffee. Replacement capsule hoppers are available from the Miele Spare Parts Dept. Settings F K 1 K 2 K 3 K 4 K 5 L on G k C ^ Select "Settings F " from the Main menu, and then touch the OK sensor.
The machine should be descaled regularly to ensure that it functions correctly. It will remind you when this needs to be carried out. When only 50 portions can be made before the next descaling programme has to be run, the following message will appear in the display: No.
The display will guide you through the whole procedure. Please follow the instructions to, for example, empty the drip tray, fill the water container etc. The descaling programme cannot be cancelled once you have touched the OK sensor. The programme has to be completed through to the end.
^ When a message asking you to fill the water container with fresh tap water appears in the display, you should remove the container and rinse it out thoroughly with clean water. Make sure all traces of descaling agent are removed, and then fill it up the the k mark with clean tap water.
Repairs to electrical appliances should only be carried out by a suitably qualified and competent person in strict accordance with current local and national safety regulations. Repairs and other work by unqualified persons could be dangerous. The manufacturer cannot be held liable for unauthorised work.
. . . the machine does not switch on even though the "Switch on at" setting for the timer has been activated. The system lock has been activated. ^ Deactivate it. (See "Settings: customising your machine - Safety (activating the System lock)").
...n o water comes out of the steam or hot water spout. The water container has not been correctly positioned inside the machine. ^ Remove the water container and replace it. The steam valve is blocked if you still cannot get any water out of the valve or if only a little comes out: ^ Open the front of the machine.
. . . coffee preparation has been interrupted. ^ Have you selected a double espresso or a double coffee? The machine uses two capsules for double portions. If there was only one capsule left in the chamber the machine will not make the coffee. ^ Fill the capsule carousel.
. . . the coffee is too weak. ^ Make sure that the amount of water programmed is not too much for the coffee. ^ Check to see how many coffees have already been dispensed (see "Settings: Customising your machine - Info (showing the number of drinks)").
. . . the fault message "Push water container right in" o rF-1 0 appears. Water has not been taken in. ^ Perhaps the system was not filled with water before the first drink was made. Fill the system with water as described in "Making drinks: Before preparing the first drink - Filling the system with water".
. . . the message "Fault - 75" or "Fault - 76" appears in the display. A coffee capsule has jammed. ^ Open the front of the machine. Press the master switch in the machine at the top left to disconnect it from the mains . ^ Remove the waste container.
...i fa n y other error messages commencing with "F" appear. ^ Remove the carousel runners, waste container, water container and capsule plate from the machine. ^ Switch off the machine with the master switch, wait about 10 seconds and then switch it back on again.
In the event of a fault which you cannot correct yourself, please contact: – your Miele Dealer or – the Miele Service Department (see back cover for address). When contacting your Dealer or the Service Department, please quote the model and serial number of your machine.
All electrical work should be carried out by a suitably qualified and competent person only, in strict accordance with current national and local safety regulations (BS 7671 in the UK). Installation, repairs and other work by unqualified persons could be dangerous.
This coffee machine is available, depending on country, either as a plug-and- go freestanding appliance for countertop use or as a built-in appliance. Built-in coffee machines Built-in coffee machines.
or underneath a wall unit using a special building-under frame CVUG 50 (available to order) or in a dresser unit. Built-in models can also be converted into a freestanding machine by using a special counter-top frame CVSG 50 (available to order).
Installing a built-in coffee machine Before installation make sure that there is no power supply to the machine. This also applies should it ever need to be taken out of its housing unit. The machine must be built in before it is operated. You will need two Allen keys (size 3 and 5) for installing the machine.
Securing the machine ^ Connect the machine to the electricity supply. ^ Push it all the way into the niche until you feel resistance. ^ Open the front of the machine, and partially tighten the side socket screws. ^ Carefully turn the lower socket screws a to centre the machine in the niche.
Alteration rights reserved / 3208 CVA 3650 M.-Nr. 07 188 741 / 00.
Ein wichtiger Punkt beim Kauf des Geräts Miele CVA 3650 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Miele CVA 3650 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Miele CVA 3650 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Miele CVA 3650 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Miele CVA 3650 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Miele CVA 3650 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Miele CVA 3650 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Miele CVA 3650. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Miele CVA 3650 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
