Benutzeranleitung / Produktwartung BR777 des Produzenten Midland
Zur Seite of 30
BR777 TW O-W A Y R A DIO O W NER'S MA NU AL www .bluestarcomm.net.
.
Model BR777 Page 1 www .bluestarcomm.net T ABLE OF CONTENTS 1 Intr oduction 2 Impor tant Notice, FCC Licensing 3 LCD Displa y 4 Contr ols 5 Bat t ery Installation 6 Installing the Belt Clip 7 Installi.
Page 2 www .bluestarcomm.net W elcome to the w or ld of Midland electr onics Congratulations on your purchase of a high quality MIDLAND product. Y our 2-way radio represents the st ate-of-the-art in high-tech engineering. Designed for Business Radio operation, this compact package is big in performance.
Page 3 www .bluestarcomm.net IMPOR T ANT NO TICE FCC LICENSE REQUIRED FOR BUSINESS RADIO OPERA TION The BR777 operates on UHF frequencies which require an FCC (Federal Communications Commission) license. Y ou must be licensed prior to operating on these frequencies.
Page 4 www .bluestarcomm.net LCD DISPLA Y 1. BA TTER Y METER – Indicates the battery level. 2. KEY LOCK ICON – Indicates KEY LOCK mode is on. 3. RECEIVE (RX)/TRANSMIT (TX) ICON – Indicates radio is transmitting a signal or receiving a transmission.
Page 5 www .bluestarcomm.net Model BR777 CONTROLS 13. PTT Button – Press and hold to transmit voice communication. 14. UP Button – Increase the volume level or make adjustments in Program mode. 15. DOWN Button – Decrease the volume level or make adjustments in Program mode.
Page 6 www .bluestarcomm.net BA T TER Y INS T ALLA TION Y our BR777 radio operates with 3.7Vdc 650mAh Li-ion Battery Pack (BA TT7L). The belt clip should be removed (see INST ALLING THE BEL T CLIP) to ease installation or removal of the batteries. T o install the batteries: 1.
INS T ALLING THE BEL T CLIP T o install the BEL T CLIP , use a screwdriver to attach the belt clip to the radio. T urn the screwdriver clockwise to tighten the belt clip screw . T urn the screwdriver counter-clockwise to loosen/remove the belt clip screw .
Page 8 www .bluestarcomm.net CHAR GING THE BA T TER Y P A CK Y our BR777 is equipped for using a rechargeable Li-ion Battery Pack which can be recharged using a desktop charger (BRC501). Initial charge time is 2 hours with a charge time of 2 hours thereafter .
Page 9 www .bluestarcomm.net The BRC601 Multi-unit charger (not included) allows charging of up to 6 radios at the same time. T o charge using the Multi-unit Charger (BRC601): 1. T urn off the unit s. 2. Place the rechargeable battery packs in the radios.
PO WER ON/OFF Press the MODE button for 3 seconds to turn the radio on. During Power On, the radio will beep 2 times with dif ferent tones, the LCD will display all icons for 1 second and the LCD display will indicate the last channel selected. T o turn the radio of f press the MODE button for 3 seconds.
Page 1 1 www .bluestarcomm.net Model BR777 TRANSMIT (TX) PO WER LEVEL SELECTION Y our BR777 radio has 2 power level settings. T o select the power level on any channel, press and hold the PTT button, then press the S button to select Hi Tx Power Level setting, or press the T button to select Lo TX Power Level setting.
Page 12 www .bluestarcomm.net Model BR777 F A CT OR Y DEF A UL T SET TING Y our BR777 radio is programmed at the factory to the following settings: T o restore the factory settings: S tart with the ra.
Page 13 www .bluestarcomm.net BR777 PR OGRAMMING QUICK REFERENCE CHAR T PROGRAMMING Y OUR RADIO SET TINGS Programming mode allows you to change the following settings on your radio: l Channel (1~4) l .
Page 14 www .bluestarcomm.net SELECTING A CHANNEL In the PROGRAM mode, press the MODE button until the CHANNEL icon flashes (this is the default setting when in Program mode). Press the S T button to select from the 4 available channel numbers. Press the MODE button again to continue programming.
Page 15 www .bluestarcomm.net EDITING THE SCAN LIS T Y ou can edit the SCAN List to skip channels during scanning. In the PROGRAM mode, press the MODE button until the display shows an “ S ” on the left side of the display and a “ y ” or “ n ” icon flashing on the right of the channel number .
PROGRAMMING THE V O X (HANDS-FREE TRANSMISSION) Y our BR777 radio has 3 VOX level settings (oF/1/2/3) . In the PROGRAM mode, press the MODE button until the “ VOX ” icon appears while the current VOX setting appears on the right. Press the S T button to select between “ 0 ”, “ 1 ”,” 2 ”, or “ 3 ” VOX setting.
Page 17 www .bluestarcomm.net KEYP AD L OCK T o avoid accidentally changing the radio setting, press the LOCK button for more than 3 seconds. The KEY LOCK icon will appear on the display . PTT and CALL will still be active. Repeat the same procedure to unlock the keypad.
Page 18 www .bluestarcomm.net PROBLEM SOLUTION No Power - Check battery installation and/or replace batteries Cannot Receive Messages - Confirm the radios have the same channel and Privacy Code settings. - Make sure that you are within range of the other transceivers.
Page 19 www .bluestarcomm.net SPECIFICA TIONS Channels 4 Channels (56 Frequencies) + 121 Privacy Codes Operating Frequency UHF 461.0375 ~ 469.5625 MHz Power Source 3.7Vdc Li-ion Battery Pack FREQUENC Y CHART (MHz) Model BR777 Disp lay F REQUENCY (MHz) Disp lay F REQ UENCY (MHz) Disp lay F REQ UENCY (MHz) 1 464.
Page 20 www .bluestarcomm.net Model BR777 PRIV AC Y CODE CHAR T (ANAL OG) Disp l ay Numb er Fre que ncy (Hz ) Disp l ay Numb er Fre que ncy (Hz ) 1 67.0 20 131.8 2 71.9 21 136.5 3 74.4 22 141.3 4 77.0 23 146.2 5 79.7 24 151.4 6 82.5 25 156.7 7 85.4 26 162.
Page 21 www .bluestarcomm.net Model BR777 PRIV AC Y CODE CHAR T (DIGIT AL) Disp lay Numb er Digital Cod e Disp lay Numb er Dig it a l Cod e Disp lay Numb er Digital Code 39 023 67 174 95 445 40 025 68.
Page 22 www .bluestarcomm.net Model BR777 LIMITED W ARRANT Y Blue S tar will rep air or replace, at its option without charge, any Blue S tar by MIdland BR777 transceiver which fails due to a defect in material or workmanship within T wo Y ears following the initial consumer purchase.
Page 23 www .bluestarcomm.net Model BR777 A CCESSORIES Accessories can be purchased at www .bluestarcomm.net or call 1-800-630-4684 . B B R R C C 5 5 0 0 1 1 B B A A T T T T 7 7 L L - 1 Dual Desk Char.
Model BR777 Page 24 www .bluestarcomm.net B B A A 1 1 0 0 0 0 B B A A 3 3 0 0 0 0 B B A A 7 7 0 0 0 0 - 1 S wiv el Holster - 1 R eplacement Belt Clip w/ scre w - 1 Cloning Cable.
.
Cust omer Service: 12410 W 62nd T errace Shawnee, KS 66216 Not e: F eatur es & Specifications ar e subject to c hange without notice. MIDLAND and BLUE ST AR ar e not responsible f or unintentional er r ors or omissions on its pac kaging.
T o enter the PROGRAM mode, start with the radio powered off and press and hold the SCAN button and PTT button simultaneously while you power the radio on; done by pressing the MODE button for 3 seconds. The radio will beep and display all the LCD segments for a few seconds.
Set ting the Call Aler t/ V ibrat e Alert Set ting the VOX Cloning the Radio set ting - Press the button until “ CA ” appears. - Press the S or T button to select the Call Alert tone between 0~4 . - Selecting “ 0 ” will disable the Call Alert function.
Ein wichtiger Punkt beim Kauf des Geräts Midland BR777 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Midland BR777 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Midland BR777 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Midland BR777 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Midland BR777 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Midland BR777 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Midland BR777 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Midland BR777. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Midland BR777 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
