Benutzeranleitung / Produktwartung PS53GS Gas des Produzenten Middleby Marshall
Zur Seite of 44
PS536GS Gas Domestic, Std. Export & CE ENGLISH /French/Spanish P/N 50236 Rev. B • V1 • 10 / 0 4 Price $30.00 Middleby Cooking Systems Group • 1400 Toastmaster Drive • Elgin, IL 60120 • (847)741-3300 • FAX (847)741-4406 © 2003 Middleby Marshall, Inc.
2 ENGLISH Middleby Cooking Systems Group • 1400 Toastmaster Drive • Elgin, IL 60120 • USA • (847)741-3300 • FAX (847)741-4406 Retain This Manual For Future Reference NOTICE: This Owner's Operating and Installation Manual should be given to the user.
3 ENGLISH SECTION 1 - DESCRIPTION ................................................... 4 I . OVEN USES ............................................................. 4 I I . OVEN COMPONENTS ............................................. 4 A . Window ....
4 ENGLISH III. OVEN SPECIFICATIONS Table 1-1: Dimensions Overall Height: single oven with 17-1/2" (446mm) legs 43-1/2" (1105mm) double oven with standard 17-1/2" (446mm) legs 63" (.
5 ENGLISH SECTION 1 - DESCRIPTION Table 1-3: Electrical specifications for gas ovens (per oven cavity) Ma in Bl ow er Control Current Voltage Circuit Voltage Phase Freq.
6 ENGLISH SECTION 2 - INST ALLA TION WARNING Keep the appliance area free and clear of combustibles. WARNING Do not obstruct the flow of combustion and ventilation air to and from your oven. There must be no obstructions around or underneath the oven.
7 ENGLISH SECTION 2 - INSTALLATION Figure 2-1 - Installation Kit 1 2 3 4a, 4b, 4c, 4d 5 6 9 11 10 8 12 14 15 13 16 7 I. INSTALLATION KIT - see Figure 2-1 Qt y. Qt y. Qt y. Inc. with Inc. with Single Double Triple domestic CE Item Oven Oven Oven Part No.
8 ENGLISH B . Recommendations NOTE THAT THE HOOD DIMENSIONS SHOWN IN FIGURE 2- 2 ARE RECOMMENDATIONS ONLY. LOCAL, NATIONAL AND INTERNATIONAL CODES MUST BE FOLLOWED WHEN INSTALLING THE VENTILATION SYSTEM. ANY APPLICABLE CODES SUPERSEDE THE RECOMMENDATIONS SHOWN IN THIS MANUAL.
9 ENGLISH SECTION 2 - INSTALLATION III. ASSEMBLY A . Top Panel and Base Pad Assembly 1. Install the four leg extensions onto the base pad using the 3/8"-16x1" screws, 3/8" flat washers, and 3/8" lockwashers supplied in the Base Pad Kit.
10 ENGLISH B . Stacking For single ovens, skip ahead to Part C, Restraint Cable Installation. IMPORTANT Middleby Marshall STRONGLY RECOMMENDS that PS536GS oven cavities be stacked using the following:.
11 ENGLISH SECTION 2 - INSTALLATION Figure 2-9 - Conveyor installation Folded frame D . Conveyor Installation 1. Unfold the conveyor as shown in Figure 2-9. Then, begin to slide the conveyor into the end of the oven. The conveyor can only be installed from the end of the oven with the drive motor.
12 ENGLISH Hang chain cover on screws in control compartment wall Place inside edge of tray on retainer bracket Swing outside edge of tray up and into place Press conveyor end stop down over edge of c.
13 ENGLISH SECTION 2 - INSTALLATION IV. ELECTRICAL SUPPLY WARNING Authorized supplier personnel normally accomplish the connections for the ventilation system, electric supply, and gas supply, as arranged by the customer. Following these connections, the factory-authorized installer can perform the initial startup of the oven.
14 ENGLISH V. GAS SUPPLY CAUTION DURING PRESSURE TESTING NOTE THE FOLLOWING: 1. The oven and its individual shutoff valve must be discon- nected from the gas supply piping system during any pressure testing of that system at test pressure in excess of 1/2 psi (3.
15 ENGLISH 1. Checking the Gas Supply (Inlet) Pressure a. With the main gas supply valve closed and the circuit breaker/fused disconnect in the OFF ("O") position, open the inlet pressure tap shown in Figure 2-16 and attach a manometer to the tap.
16 ENGLISH SECTION 3 - OPERA TION A B C D E "BLOWER" Switch: Turns the blowers and cooling fans on and off. The HEAT Switch has no effect unless the BLOWER Switch is in the “ ON ” position. A. "HEAT" Switch: Allows the burner to activate.
17 ENGLISH SECTION 3 - OPERATION CAUTION In case of power failure, turn all switches to the “ OFF ” ("O") position, open the oven window, and remove the product.
18 ENGLISH Display Shows the Set Point or the Actual T em- perature in degrees Fahrenheit (F) or Celsius (C). "SP LOCK" Light Lights when the set point is locked out from changes. This setting can only be changed by service personnel. OVERTEMP Light Lights when the oven temperature is greater than 650 ° F (343 ° C).
19 ENGLISH I. MAINTENANCE - DAILY A . Check that the oven is cool and the power is disconnected, as described in the warning at the beginning of this Section. B . Clean ALL of the cooling fan grills and vent openings with a stiff nylon brush. Refer to Figure 4-1 for the locations of the grills and vents.
20 ENGLISH III. MAINTENANCE - EVERY 3 MONTHS A . Check that the oven is cool and the power is disconnected, as described in the warning at the beginning of this Section. B . Open the machinery compartment access panel. Vacuum the inside of the compartment using a shop vacuum.
21 ENGLISH SECTION 4 - MAINTENANCE 2. Remove the master links from each conveyor belt. Then, roll the belts up along the length of the conveyor to remove them from the frame. 3. Remove the two conveyor adjustment screws from the idler end of the conveyor frame, as shown in Figure 4- 4.
22 ENGLISH IV. MAINTENANCE - EVERY 6 MONTHS A . Check that the oven is cool and the power is disconnected, as described in the warning at the beginning of this Section. B . Check for excessive wear on the conveyor drive motor brushes. The brushes should be replaced if they have worn to less than 1/4" (6mm) in length.
23 ENGLISH I. KEY SPARE PARTS KIT ITEM QTY. P/N DESCRIPTION 1 1 47321 DIGITAL TEMPERATURE CONTROLLER 2 1 51067 CONVEYOR DRIVE MOTOR W/PICKUP ASSY. 3 2 30153 DRIVE MOTOR BRUSHES 4 1 37337 KIT, CONVEYOR.
24 ENGLISH.
25 ENGLISH II. INSTALLATION KIT QTY. QTY. QTY. ITEM SINGLE OVEN DOUBLE OVEN TRIPLEOVEN P/N DESCRIPTION 1 1 1 1 48605 TOP PANEL 2 2 4 4 3A80A8801 SCREW, PAN HEAD #10 x 2" 3 1 1 1 42893 B ASE PAD 4.
26 ENGLISH page 1 FRANÇAIS page 57 ESP AÑOL página 85 DEUTSCH seite 29.
27 ENGLISH page 1 FRANÇAIS page 57 ESP AÑOL página 85 DEUTSCH seite 29 III. PANELS, END PLUGS AND WINDOW ITEM QTY. P/N DESCRIPTION 1 1 50172 WINDOW SHROUD 2 1 22500-0021 NAMEPLATE, "MIDDLEBY MARSHALL" 3 1 48437 HEAT GUARD PLATE 4 2 30927 BUMPER 5 1 48512 ASSEMBLY, WINDOW (INC.
28 ENGLISH page 1 FRANÇAIS page 57 ESP AÑOL página 85 DEUTSCH seite 29.
29 ENGLISH page 1 FRANÇAIS page 57 ESP AÑOL página 85 DEUTSCH seite 29 QTY. QTY. ITEM S I NGLE BELT SPLIT BELT P/ N DESCRIPTION 1 1 1 47321 DIGITAL TEMPERATURE CONTROLLER 2 1 1 48511 DECAL, CONTROL PANEL 3 1 2 37337 KIT, CONVEYOR SPEED CON- TROLLER WITH DIGITAL DISPLAY (INC.
30 ENGLISH page 1 FRANÇAIS page 57 ESP AÑOL página 85 DEUTSCH seite 29.
31 ENGLISH page 1 FRANÇAIS page 57 ESP AÑOL página 85 DEUTSCH seite 29 V. MACHINERY COMPARTMENT AND GAS TRAIN ITEM QTY. P/N DESCRIPTION 1 1 27470-0004 FINGER GUARD NOTE: The oven does NOT have a cooling fan in this location. The opening provides passive cooling only.
32 ENGLISH page 1 FRANÇAIS page 57 ESP AÑOL página 85 DEUTSCH seite 29.
33 ENGLISH page 1 FRANÇAIS page 57 ESP AÑOL página 85 DEUTSCH seite 29 VI. REAR COMPARTMENT AND BLOWERS ITEM QTY. P/N DESCRIPTION 1 2 42951 INLET RING 2a 1 42752 BLOWER WHEEL, RIGHT (VIEWED FROM RE.
34 ENGLISH page 1 FRANÇAIS page 57 ESP AÑOL página 85 DEUTSCH seite 29.
35 ENGLISH page 1 FRANÇAIS page 57 ESP AÑOL página 85 DEUTSCH seite 29 VII. SINGLE-BELT CONVEYORS P/N - 60" P/N - 56" P/N - 76" ITEM QTY. CONVEYOR CONVEYOR CONVEYOR DESCRIPTION 1 1 48847 48847 48790 FRAME, DRIVE SIDE 21 < - - - - 48797 - - - - > ASSEMBLY, STANDARD DRIVE SHAFT (INC.
36 ENGLISH page 1 FRANÇAIS page 57 ESP AÑOL página 85 DEUTSCH seite 29.
37 ENGLISH page 1 FRANÇAIS page 57 ESP AÑOL página 85 DEUTSCH seite 29 VIII. SPLIT-BELT CONVEYORS 1 1 48847 48847 48790 FRAME, DRIVE SIDE 21 < - - - - 48759 - - - - > ASSEMBLY, SPLIT DRIVE SHAFT, STANDARD AND HIGH SPEED (INC.
38 ENGLISH page 1 FRANÇAIS page 57 ESP AÑOL página 85 DEUTSCH seite 29 NOTES.
39 ENGLISH page 1 FRANÇAIS page 57 ESP AÑOL página 85 DEUTSCH seite 29 SECTION 6 - ELECTRICAL WIRING DIAGRAMS SECTION 6 - ELECTRICAL WIRING DIAGRAMS IMPOR T ANT An electrical wiring diagram for the oven is also located inside the machinery compartment.
40 ENGLISH page 1 FRANÇAIS page 57 ESP AÑOL página 85 DEUTSCH seite 29 Fig. 6-2 - Wiring diagram, PS536GS Gas Oven 208/240V, 50/60 Hz, 1 Ph.
41 ENGLISH page 1 FRANÇAIS page 57 ESP AÑOL página 85 DEUTSCH seite 29 SECTION 6 - ELECTRICAL WIRING DIAGRAMS Fig. 6-3 - Wiring diagram, PS536GS Gas Oven 208/240V, 50/60 Hz, 1 Ph.
42 ENGLISH page 1 FRANÇAIS page 57 ESP AÑOL página 85 DEUTSCH seite 29 NOTES.
43 ENGLISH page 1 FRANÇAIS page 57 ESP AÑOL página 85 DEUTSCH seite 29 NOTES.
Middleby Cooking Systems Group • 1400 Toastmaster Drive • Elgin, IL 60120 • USA • (847)741-3300 • FAX (847)741-4406 24-Hour Service Hotline: 1-(800)-238-8444 www .middleby .com Middleby is proud to support the Commercial Food Equipment Service Association (CFESA).
Ein wichtiger Punkt beim Kauf des Geräts Middleby Marshall PS53GS Gas (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Middleby Marshall PS53GS Gas noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Middleby Marshall PS53GS Gas - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Middleby Marshall PS53GS Gas reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Middleby Marshall PS53GS Gas erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Middleby Marshall PS53GS Gas besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Middleby Marshall PS53GS Gas verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Middleby Marshall PS53GS Gas. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Middleby Marshall PS53GS Gas gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
