Benutzeranleitung / Produktwartung A2xx des Produzenten Microsoft
Zur Seite of 43
User's Guide for A2xx with WinCe Build # 5 User's Guide Windows CE 5.0 Version for FUTRO A2xx Series Management by Scout Enterprise Build # 5 August 2007 ©2007 by UniCon Software GmbH. All rights reserved Information in this document is subject to change without notice.
User's Guide for A2xx with WinCe Build # 5 Contents 1 About This Guide ...................................................................................................................................... 0 1.1 Keyboard Sh ortcuts ..............
User's Guide for A2xx with WinCe Build # 5 Table of Figures Figure 1: Windows Thin Client Setup Wi zard – Management and keyboar d layout ......................................... 1 Figure 2: Windows Thin Client Setup Wizard – Manage ment address .
User's Guide for A2xx with WinCe Build # 5 Figure 46:Li censes ............................................................................................................. ............................. 28 Figure 47:Device Password ..............
User's Guide for A2xx with WinCe Build # 5 0 1 About This Guide This documentation presents step-by-step direct ions to run the Windows CE Thin Client. For your convenience there are a few remarks about handling the dialog boxes: The dialog boxes are equipped with the buttons OK and ☒ in the upper right corner.
User's Guide for A2xx with WinCe Build # 5 1 2 First Contact Wizard The Windows Thin Client Setup Wizard is used for the terminal's initial setup.
User's Guide for A2xx with WinCe Build # 5 2 Figure 2: Windows Thin Client Se tup Wizard – Man agement address Click Next and select the group you want to register your client in: Figure 3 Wind.
User's Guide for A2xx with WinCe Build # 5 3 Figure 4 Windows Thin Client Setup Wi za rd – Completed (managed by S cout Enterp rise) Click Finish to apply the specified settings and ex it the wizard. If you deny to be managed, you get the option to m odify the terminal name and show the network properties.
User's Guide for A2xx with WinCe Build # 5 4 Click Next to show and - if desired - modify the desktop area and refresh frequency. Figure 6: Windows Thin Client Setup Wi za rd – Desktop Area and Refresh Freq uency Click Next to open the control panel (see chapter 4.
User's Guide for A2xx with WinCe Build # 5 5 3 Terminal Connection Manager Note : When using the ‘Standard Shell’ you will find the connection manager by selecting Start Programs Connection Manager.
User's Guide for A2xx with WinCe Build # 5 6 Click Edit … to modify an existing application. It depends on the application which ta bs are available and which settings can be modified. Editing an RDP application is described in chapter 5.4.1 Edit an RDP Application, Click the button Delete to delete the selected application.
User's Guide for A2xx with WinCe Build # 5 7 4 Terminal P r operties 4.1 General Starting from the Terminal Connection Manager press <F2> to open the Terminal Properties Window with the tab.
User's Guide for A2xx with WinCe Build # 5 8 • Remote Desktop Protocol Version • Citrix ICA Client Version • Ericom PowerTerm Version Terminal Name: Enter the terminal name which can be recognized by your server. The maximum length of the terminal name is 15 characters due to server limitation.
User's Guide for A2xx with WinCe Build # 5 9 4.3 Diagnosis Shows IP address and other parameters, sets the debug level, shows and transfers system and log files and leads to Console and Ping Figure 12: Terminal Properties– Diagn osis tab with Ping window Console: offers the command prompt; Ping: allows you to check for the connection.
User's Guide for A2xx with WinCe Build # 5 10 4.4 Control Panel This is the tab to define the terminal settings. Figure 13: Terminal Properties– Control Panel 4.
User's Guide for A2xx with WinCe Build # 5 11 Connection : Enter Proxy server address if required Figure 15: Internet Options – Connection Security : Settings for the different zones Figure 16:.
User's Guide for A2xx with WinCe Build # 5 12 Advanced : Customize the options for accessibility and browsing Figure 18: Internet Options – Advanced Popups : Customize the behavior of popup win.
User's Guide for A2xx with WinCe Build # 5 13 4.4.2 Printers In the Control Panel double-click the Printers icon to open the "Add printer" dialog box. Double click on the "Add Printer" icon to open the Printer Wizard. This wizard provides four major steps to setup the printer.
User's Guide for A2xx with WinCe Build # 5 14 Step 3: Name your Printer Figure 22:Control Panel – Printer Name 1. Your printer is on the list. The printer you select will display in the "Printer name" field. 2. Your printer is not on the list.
User's Guide for A2xx with WinCe Build # 5 15 4.4.3 ThinPrint Settings ThinPrint .print Client CE allows you to print directly from the terminal to network printers. Together with the Citrix MetaFrame application server software, this feature provides a powerful solution for remote offices and wireless LAN hotspots.
User's Guide for A2xx with WinCe Build # 5 16 Add local port… “ Add local port… " to enter the printer name and printer port in the dialog box. Add network printer…: Click (share d) printers and double-click one of the listed print ers.
User's Guide for A2xx with WinCe Build # 5 17 4.4.4 Keyboard The Repeat settings for the characters can be modified. Figure 26:Control panel – Keyboard Pro pertie s 4.
User's Guide for A2xx with WinCe Build # 5 18 Password: If you selected the FTP protocol it is mandatory to enter the password . Image: Enter the name of the new image file in the Image field. Proxy: (optional) Enter proxy name or IP address if you selected HTTP Server.
User's Guide for A2xx with WinCe Build # 5 19 4.4.6 Display The Display Properties dialog allows to modify the appearance, i.e. the color scheme of the applications windows. Figure 29: Display Prope rties 4.4.7 Mouse Set the double-click sensitivity for both speed and physical di stance between clicks.
User's Guide for A2xx with WinCe Build # 5 20 4.4.8 Volume and Sounds Move the slide from Soft to Loud to modify the volume. 4.4.9 Date/Time This dialog allows to set the current time and the time zone as well as the option to automatically adjust the clock for daylight saving time.
User's Guide for A2xx with WinCe Build # 5 21 4.4.11 VNC Settings Set password requested for mirroring the terminal. Enable the check boxes • Launch on startup: if you wish to allow mirroring from the very start of the terminal.
User's Guide for A2xx with WinCe Build # 5 22 4.4.15 Network Files Network files can be mapped, if required, to save files from the local Internet Explorer.
User's Guide for A2xx with WinCe Build # 5 23 Preferences : Enter the serial number and define your default window colors. PNAgent : Option: Enable and specify server Option: Force PNAgent on Reboot Select from drop-down list when to apply Windows key combinations.
User's Guide for A2xx with WinCe Build # 5 24 Firewall Settings : Enter proxy address if required to assure a secure connection. Figure 38: Global ICA Client Settings – Firewall Settings 4.4.17 ICA Options This allows to map local disk drives and modify the mouse timer settings as well as the scroll speed for ICA sessions.
User's Guide for A2xx with WinCe Build # 5 25 4.4.18 Network and Dial-Up Connections Shows the parameters of the network card or defines a new network connection. 4.4.18.1 PCI-RTCENIC1 IP Address : This is to enter an IP address or to obtain an IP address fro m the DHCP server.
User's Guide for A2xx with WinCe Build # 5 26 Link speed: The link spe ed can be set here. Modifications take effect after the next restart. If the speed has been 1Gbit/s before modification (setting: 1Gbit/s or Auto) and is to be reduced, then the device must be shut down and restarted.
User's Guide for A2xx with WinCe Build # 5 27 4.4.19 LPD Settings Figure 44:LPD Server Settings Click Start or Stop to start or stop the LPD Server. If Launch on startup is enabled the LPD Server will always be started during the start of the device.
User's Guide for A2xx with WinCe Build # 5 28 4.4.21 Licenses The window contains a list of the licens ed products and the state of the licenses (Gained / Not gained). Figure 46:Licenses Request license from server : The Scout server gets a request for a license.
User's Guide for A2xx with WinCe Build # 5 29 4.4.22 Security Management Figure 47:Device Password To modify security settings a device password is required. Having entered this password the security dialog opens. This is to enable or disable the right of access to the Setup dialog and the tabs ‚Configuration’ of the Connection Managers.
User's Guide for A2xx with WinCe Build # 5 30 5 Configuration of Applications 5.1 Add New Application – Microsoft Remote Desktop Client From the Terminal Properties window click OK to switch to the Terminal Connection Manager and open the tab Configuration .
User's Guide for A2xx with WinCe Build # 5 31 5.1.1 WTS Connection Wizard This chapter describes the configuration of a ne w application of the type RDP.
User's Guide for A2xx with WinCe Build # 5 32 Step 3: On connection the default display is the Desktop, enter an application file nam e, if you want to start an application on connection. Figure 52 WTS Connection Wiza rd – Ste p 3 Step 4: Click Finish to save your new connection.
User's Guide for A2xx with WinCe Build # 5 33 5.2 Add New Application - Media P layer From the Terminal Properties window click OK to switch to the Terminal Connection Manager and open the tab Configuration Click Add… to open the dialog New Application , and choo se Media Player from the drop-down list.
User's Guide for A2xx with WinCe Build # 5 34 5.4 Edit Connections 5.4.1 Edit an RDP Application Once the application has been added, it can be edited any time.
User's Guide for A2xx with WinCe Build # 5 35 Figure 57 Edit Connection – Local Re so urces tab Using the RDP Programs tab, you can enter a file name for the application to run on connection.
User's Guide for A2xx with WinCe Build # 5 36 Using the RDP Experience tab, you can choose your connection speed to optimize performance. Figure 59 Edit Connection – Expe rience tab 6 Standard Shell The dialogs described above may also be opened from a Standard Shell.
User's Guide for A2xx with WinCe Build # 5 37 Selecting Settings from the Windows menu the 'Setup Device' dialog and the 'Control Panel' can be opened. Figure 61 Settings The menu option Run enables to start executable files. The button ‚ Browse’ opens the File Explorer.
User's Guide for A2xx with WinCe Build # 5 38 7 Index accessib ility .........................................................13 Add prin ter .......................................................... 14 Application ..............................
Ein wichtiger Punkt beim Kauf des Geräts Microsoft A2xx (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Microsoft A2xx noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Microsoft A2xx - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Microsoft A2xx reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Microsoft A2xx erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Microsoft A2xx besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Microsoft A2xx verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Microsoft A2xx. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Microsoft A2xx gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
