Benutzeranleitung / Produktwartung GX-1 des Produzenten MicroBoards Technology
Zur Seite of 23
GX-1 Disc Publisher For Microsoft Windows ® 2000 & XP Users Manual Microboards Technology LLC Version 1. 1.
• Introduction 2.
MICROBOARDS TECHNOLOGY, LLC GX-1 D ISC PUBLISHER 3 TABLE OF CONTENTS INTRODUCTION ................................................................................................................... ........................................... 4 W HAT ’ S I NCLUDED .
• Introduction 4 Introduction The Microboards GX-1 Disc Publisher is a singl e drive, 50 disc, print and record system. The GX-1 combines industrial strength printing and recording into a single, easy to use duplicato r. The system include s one 16x DVD recorder.
MICROBOARDS TECHNOLOGY, LLC GX-1 D ISC PUBLISHER 5 System Requirements The Microboards GX-1 Disc Publishe r has the following minimum requirements and compatibilities: Operating System Microsoft Windows 2000 with SP4 or Windo ws XP with SP2. Processor Pentium 4 (or equivalent) CPU, running at 2.
• Assembly and Installation 6 Installing Ink Cartridges Supported Ink Cartridges The GX-1 Disc Publish er uses a single color in k cart ridge. The part number fo r this cartridge is GX- 200HC. If other cartridges ar e installed, the GX-1 Di sc Publisher will not func tion.
MICROBOARDS TECHNOLOGY, LLC GX-1 D ISC PUBLISHER 7 Loading Discs The next step is to load your GX-1 Disc Publishe r with output discs. The system will accept CD o r DVD 120 mm (12 cm) inkjet printable discs. If the di sc does not have an inkjet p rintable surface, the ink will not adhere to the surfa ce of the disc.
• Assembly and Installation 8 GX-1 Disc Publisher Installation The GX-1 Disc Publisher installation disk includes an Installe r that will walk you through the process step by step. Please use the Installer and follow the installation steps in order.
MICROBOARDS TECHNOLOGY, LLC GX-1 D ISC PUBLISHER 9 Windows XP The Windows Found New Hardware Wi zard will ap pear during any installation, includi ng when using the Installer. Please follow all directions in the order in which they a ppear when using the Installer.
• Assembly and Installation 10 5. Select No, not this time and click Next. 6. Click Next. 7. Click Finish for the next screen. 8. Select No, not this time and click Next. 9. Click Next. 10. Click Continue Anyway. 11. Click Finish for the next screen.
MICROBOARDS TECHNOLOGY, LLC GX-1 D ISC PUBLISHER 11 13. Click Next. 14. Click Continue Anyway. 15. Click Finish for the next screen. 16. Select No, not this time and click Next.
• Setting Printer Alignment 12 Setting Printer Alignment Alignment The GX-1 Disc Publisher system has been align ed at the factory. The factory alignment values are on a label on the back of the GX-1 Disc Publisher. Follow these steps to enter the factory value s : • Click on the Start Button on your Windows computer.
MICROBOARDS TECHNOLOGY, LLC GX-1 D ISC PUBLISHER 13 Print Alignment Disc NOTE: The Alignment Disc should al ways be printed using Photo mode for the best accuracy. There are factory default alignm ent values for the TOP and LEFT value s for your GX-1 Disc Publisher, referring to the top and left margin sizes, respectively.
• Printing Preferences 14 Printing Preferences Access the Printing Preferences by clicking the Start Button on your Win dows computer. Select Settings and then select Printers . Right click o n the Microboards GX Series icon, then select Printing Preferences .
MICROBOARDS TECHNOLOGY, LLC GX-1 D ISC PUBLISHER 15 Advanced Features Advanced Features allow you to adjust the amount of ink placed on the disc using the Ink Volume setting, and adjust the Dry Time of the disc. Color Tab Saturation , Brightness and Color Tone allow you to fine tune your print image.
• 16 Utility Tab The Resolution setting should al ways be set at .1mm for best results. Alignment values will move the print image on the disc. The Outer and Inner Diameters will change the size of the area to be printe d. To avoid excessive ink buildup, these values should never be set so that the GX- 1 Disc Publisher is printing off the media.
MICROBOARDS TECHNOLOGY, LLC GX-1 D ISC PUBLISHER 17 The GX-1 Disc Publisher and Zulu2 All printing and burning is done using Zulu2. Do not print using SureThing, as SureTh ing does not control the loading and unloading process. The first time the user launches Zulu2, the softwar e will ask you to configure the GX-1 Disc Publisher system.
• The GX-1 Disc Publisher and Zulu2 18 You will see an entry labeled “USB Serial Port (COMx)” entry for each GX-1 Disc Publisher you have installed. The COMx will be the COM port number to be entered into the Configure screen. Select the COM port as found on the Computer Management screen.
MICROBOARDS TECHNOLOGY, LLC GX-1 D ISC PUBLISHER 19 Manual Software Re-Installation The information in this section will only apply to a manual re-i nstallation of the individual software packages. If you have not yet i nstalled the GX-1 Disc Publisher using the Installer, it is recommended that you do so.
• Manual Software Re-Installation 20 If you wish to change the default Install directory, it can be done here. Click Next when co mpleted. Next, you have options to add an icon to your desktop and/or a folder in the Start Menu. Once selected, clic k Ne xt .
MICROBOARDS TECHNOLOGY, LLC GX-1 D ISC PUBLISHER 21 Zulu2 Software Re-Installation Insert the Microboards GX-1 Disc Publi s her In stallation CD into the CD/DVD ROM drive on your computer. The installer should open a utomatically; click the Cancel button to exit the installer.
• Troubleshooting 22 Troubleshooting Printer not printing: 1. Confirm the GX-1 Disc Pub lisher is plugged into a power source and is tu rned on. The ON/OFF switch is locate d at the back of the unit, above the power cabl e connector. 2. Confirm the green light on the power button is lit on th e front panel.
MICROBOARDS TECHNOLOGY, LLC GX-1 D ISC PUBLISHER 23 Printing Specifications Print Speed: Depends upon percenta ge of coverage and print mode sele cted Approx. 45 seconds for 100% full-color coverage, Photo Normal Mode Approx. 20 seconds for 100% full-color coverage, Te xt & Graphics Best Mode Approx.
Ein wichtiger Punkt beim Kauf des Geräts MicroBoards Technology GX-1 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie MicroBoards Technology GX-1 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für MicroBoards Technology GX-1 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von MicroBoards Technology GX-1 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über MicroBoards Technology GX-1 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon MicroBoards Technology GX-1 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von MicroBoards Technology GX-1 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit MicroBoards Technology GX-1. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei MicroBoards Technology GX-1 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
