Benutzeranleitung / Produktwartung 2011 SLS AMG des Produzenten Mercedes-Benz
Zur Seite of 436
SLS AMG Operator’s Manual BA 197 USA, CA Edition A 2011; 1; 27, en-US hereepe Version: 3.0.3.5 2010-03-24T15:31:10+01:00 - Seite 1.
Symbols Trademarks: R Bluetooth ® is a registered trademark of Bluetooth SIG Inc. R DTS is a registered trademark of DTS, Inc. R Dolby and MLP are registered trademarks of Dolby Laboratories. R HomeLink ® is a registered trademark of Prince, a Johnson Controls Company.
Congratulations Our company and staff congratulate you on the purchase of your new Mercedes-Benz. Your selection of our product is a demonstration of your trust in our company name. Furthermore, it exemplifies your desire to own an automobile that will be as easy as possible to operate and will provide years of service.
BA 197 USA, CA Edition A 2011; 1; 27, en-US hereepe Version: 3.0.3.5 2010-03-24T15:31:10+01:00 - Seite 2.
Index ....................................................... 4 Introduction ......................................... 26 At a glance ........................................... 31 Safety and security ............................. 43 COMAND APS ......
1, 2, 3 ... 911 emergency call .......................... 152 911 emergency call system ............. 152 A ABS (Antilock Brake System) ............. 61 Indicator lamp ................................ 389 Messages in the multifunction display ........
Gear selector lever ........................ 263 Hill-start assist system .................. 293 Kickdown ....................................... 266 Kickdown (manual shift program) .. 270 Manual shift program ..................... 268 Messages in the multifunction display .
Beverage holder see Cup holder Bit rates for digital audio .................. 179 Blocked areas for route guidance .... 112 Blocking routes ................................. 137 Bluetooth ® activating phone ............................ 149 Device authorizing .
stopping or pausing playback ........ 186 voice control with .................. 224, 229 Center console Lower part ....................................... 39 Upper part ....................................... 38 Central locking Automatic .............
Lighting .......................................... 284 Vehicle ........................................... 286 Convenience submenu Easy-entry/exit feature .................. 286 Fold-in function for exterior rear view mirrors ........................
Difficulties While driving .................................. 260 With starting .................................. 258 Dimensions (vehicle) see Vehicle specification Direction of rotation (tires) .............. 337 Disc handling ..................... 100, 180, 199 Display, main .
DVD menu ..................................... 203 fast forward/rewind ...................... 202 functional restrictions .................... 200 handling and care of discs ............. 199 interactive content ........................ 205 menu system .
Exterior rear view mirrors ................ 246 Fold-in function .............................. 248 Parking position ............................. 247 Power-folding ................................. 248 Switching fold-in function on or off ...........
GVW (Gross Vehicle Weight) ............ 345 GVWR (Gross Vehicle Weight Rating) ................................................ 345 H Hands-free microphone, switching on/off ................................................. 160 Hanging up (phone calls) .
iPod ® devices ..................................... 192 connecting to ................................. 192 playback options ............................ 197 playlists and folders ....................... 195 selecting tracks ........................
Lighting .............................................. 249 Daytime running lamp mode .......... 251 Exterior .......................................... 250 Interior ........................................... 253 Limp-home mode ......................
Media list ........................................... 186 Memory cards starting playback ........................... 184 voice control with .................. 224, 230 Memory function ............................... 249 Menus see Control system menus Menus, COMAND how to operate .
Buttons .................................. 272, 273 Cleaning ......................................... 359 Easy-entry/exit feature ......... 245, 286 Gearshift control ............................ 267 Memory function ........................... 249 Overview .
On-board computer see Con trol system One-touch gearshifting ..................... 267 Operating example .............................. 88 Operating safety .................................. 28 Orientation of map ............................ 108 Ornamental moldings, cleaning .
voice control for ............................ 215 ZAGAT ® Rating Service .................. 131 Possible lane, defined ....................... 135 Power assistance .............................. 349 Power outlets ....................................
Read-aloud announcements navigation ...................................... 137 see Navigation announcements see Traffic messa ges Read-aloud speed setting ............................................. 94 Read CD Database function .............. 188 Reading out address book .
Satellite radio .................................... 173 category selection ................. 175, 222 Displaying information ................... 176 Memory functions .......................... 176 Selecting a channel ....................... 175 selecting channels .
Speed settings Cruise control ................................ 291 Resume function ............................ 292 Speller .................................................. 86 destination memory list ................. 122 for points of interest (POIs) .
Messages in the multifunction display ........................................... 377 Remote door lock .......................... 313 Search & Send ............................... 313 SOS button .................................... 310 Stolen Vehicle Recovery Services .
Maximum permissible tire inflation pressure ........................... 333 Maximum tire load ......................... 337 Messages in the multifunction display ................................... 368, 387 Ply composition and material used ..........
U Uniform Tire Quality Grading Standards .................................. 339, 346 Units Selecting speedometer display mode ............................................. 283 Units of measurement, navigation .. 103 Unleaded gasoline, premium ........
Volume (loudness) COMAND ......................................... 89 external audio sources .......... 197, 206 mobile phones ............................... 151 muting COMAND ............................. 89 navigation announcements ...... 89, 137 phone calls .
Product Information Please observe the following in your own best interest: We recommend using Genuine Mercedes- Benz Parts as well as conversion parts and accessories explicitly approved by us for your vehicle model. We have tested these parts to determine their reliability, safety and special suitability for Mercedes-Benz vehicles.
Rhode Island, and Vermont Emission Control System Warranty R State Warranty Enforcement Laws (Lemon Laws) Important notice for California retail buyers and lessees of Mercedes-Benz automobiles Under C.
If you sell your Mercedes, please leave all literature with the vehicle to make it available to the next operator. If you bought this vehicle used, be sure to send in the “Notice of Purchase of Used.
Proper use of the vehicle Proper use of the vehicle requires that you are familiar with the following information and rules: R the safety precautions in this manual R the “Technical data” section .
This information helps, for example, to diagnose vehicle systems after a collision and to continuously improve vehicle safety. Daimler may access the information and share it with others R for safety .
Exterior view ....................................... 32 Cockpit ................................................. 33 Instrument cluster .............................. 34 Multifunction steering wheel ............. 36 Center console ...................
Exterior view i This Operator’s Manual describes all features, standard or optional, potentially available for your vehicle at the time of purchase. Please be aware that your vehicle might not be equipped with all features described in this manual.
Cockpit Function Page : Cruise control lever 290 ; Steering wheel gearshift control 267 = Instrument cluster 34 ? Horn A Overhead control panel 40 B Front Parktronic warning indicator 295 C Glove box .
Instrument cluster i Please refer to the overview of the indicator and warning lamps ( Y page 35). Function Page : Speedometer ; Upshift indicator 269 = Tachometer 271 ? Engine oil temperature gauge 271 A Multifunction display 273 B Fuel gauge 271 34 Instrument cluster At a glance BA 197 USA, CA Edition A 2011; 1; 27, en-US hereepe Version: 3.
Indicator and warning lamps Function Page : ESC warning lamp 393 ; Seat belt telltale 391 = $ Brake warning lamp, USA only 389 or J Brake warning lamp, Canada only 389 ? High-beam headlamp indicator l.
Multifunction steering wheel Function Page : Multifunction display 273 ; COMAND system display 72 = Press button ~ : to end a call 280 to reject an incoming call 280 Press button 6 : to answer a call 280 to dial 2 281 to redial 2 281 Press button W or X to set the volume Press button 8 to mute.
Function Page Press button 9 or : briefly: 272 to select submenus to scroll up or down through lists to select previous or next track, scene, or stored station within Audio menu 279 to switch to the p.
Center console Upper part Function Page : COMAND system 72 ; Alarm system indicator lamp 66 = Hazard warning flasher switch 252 ? Parktronic system deactivation switch 296 Function Page A Seat heating.
Lower part Function Page : Gear selector lever 263 ; COMAND controller 77 = Ashtray 307 Cigarette lighter 307 or Power outlet 308 Storage compartment 304 ? Cup holder 306 Storage compartment 304 A Sta.
Overhead control panel Function Page : Left reading lamp on/off 253 ; Interior lighting on/off 253 = Automatic control on/off 253 ? Right reading lamp on/off 253 A Information button (mbrace system 4 .
Door control panel Function Page : Inside door handle 238 ; Central locking/unlocking switch 239 = Selection button for driver’s side exterior rear view mirror 246 ? Power-folding exterior rear view.
42 BA 197 USA, CA Edition A 2011; 1; 27, en-US hereepe Version: 3.0.3.5 2010-03-24T15:31:10+01:00 - Seite 42.
Vehicle equipment .............................. 44 Occupant safety .................................. 44 Panic alarm .......................................... 60 Driving safety systems ....................... 61 Anti-theft systems ..................
Vehicle equipment i This Operator’s Manual describes all features, standard or optional, potentially available for your vehicle at the time of purchase. Please be aware that your vehicle might not be equipped with all features described in this manual.
on the SRS must therefore only be performed by qualified technicians. Contact an authorized Mercedes-Benz Center. If it is necessary to modify an air bag system to accommodate a person with disabilities, contact an authorized Mercedes-Benz Center. USA only: Call our Customer Assistance Center at 1-800-FOR-MERCedes (1-800-367-6372) for details.
information. Be sure to give the buyer this Operator’s Manual. G Warning! There is a possibility of a head air bag-related injury if occupants, especially children, are not properly seated or restrained when next to a head air bag which needs to deploy rapidly in a side impact in order to do its job.
R Do not pass seat belts over sharp edges. They could tear. R Do not make any modification that could change the effectiveness of the seat belts. R Do not bleach or dye seat belts as this may severely weaken them. In a crash they may not be able to provide adequate protection.
weight category as identified by the Occupant Classification System (OCS) ( Y page 49). The lighter the passenger-side occupant, the higher the vehicle deceleration rate required for second stage inflation of the passenger front air bag. The air bags will not deploy in impacts which do not exceed the system’s preset deployment thresholds.
but not the head, neck and arms of the driver or passenger. Side impact air bags : are deployed R on the impacted side of the vehicle R in instances with a high rate of lateral vehicle deceleration or.
Both the driver and the passenger should always use the 4 5 indicator lamp as an indication of whether or not the passenger is properly positioned. G Warning! If the 4 5 indicator lamp illuminates whe.
recommended for the size and weight of the child. Children can be killed or seriously injured by an inflating air bag. Note the following important information: R Your vehicle is equipped with air bag.
technicians as soon as possible. Contact an authorized Mercedes-Benz Center. Only have the seat repaired or replaced at an authorized Mercedes-Benz Center.
the interior of the vehicle or be ejected from it. You can be seriously injured or killed. In the same crash, the possibility of injury or death is lessened if you are properly wearing your seat belt. The air bags can only protect as intended if the occupants are properly wearing their seat belts.
R Never wear seat belts over rigid or breakable objects in or on your clothing, such as eyeglasses, pens, keys etc., as these might cause injuries. R Make sure the seat belt is always fitted snugly. Take special care of this when wearing loose clothing.
special seat belt retractors, see “Infant and child restraint systems” ( Y page 58). To release the seat belt with seat belt release button ? , see ( Y page 55). Releasing the seat belts X Press seat belt release button ? ( Y page 54). Allow the retractor to completely rewind the seat belt by guiding latch plate ; ( Y page 54).
more snugly against the body. Seat belt force limiters, when activated, are employed to help reduce the peak force exerted by the seat belts on occupants during a crash. i The ETDs do not correct an incorrect seat position or incorrectly worn seat belts.
Seat G Observe Safety notes, see page 243. X Position seat = properly. See ( Y page 244) for seat adjustment. Observe the following points: R Always be in a properly seated position. R The position should be as far rearward from the front air bag in the steering wheel as possible, while still permitting proper operation of vehicle controls.
Unsecured or improperly positioned cargo increases a child’s risk of injury in the event of R strong braking maneuvers R sudden changes of direction R an accident Infant and child restraint systems G Observe Safety notes, see page 57. We recommend all infants and children be properly restrained at all times while the vehicle is in motion.
with the weight of a standard appropriate child restraint on the passenger seat. R A child in a rear-facing child restraint on the passenger seat will be seriously injured or even killed if the passenger front air bag inflates in a collision which could occur under some circumstances, even with the air bag technology installed in your vehicle.
X Guide top tether strap ? according to the child restraint manufacturer’s instructions. X Securely fasten hook = , which is part of top tether strap ? , to anchorage ring ; .
Driving safety systems Introduction This section contains information about the following driving safety systems: R ABS ( A ntilock B rake S ystem) R Adaptive Brake R BAS ( B rake A ssist S ystem) R E.
functions as a reminder to take extra care while driving. Emergency brake maneuver X Keep continuous full pressure on the brake pedal. G Warning! If the ABS malfunctions, other driving safety systems such as the BAS or the ESC are also switched off.
! The ESC will only function properly if you use wheels of the recommended tire size as specified in the “Technical data” section of this Operator’s Manual. i The cruise control switches off automatically when the ESC engages. Electronic Traction System (ETS) G Observe Safety notes, see page 61.
X Switching on: With the engine running, press ESC switch : briefly. ESC SPORT warning lamp ì in the instrument cluster comes on. The message ESC-SPORT appears in the multifunction display. X Switching off: With the engine running, press ESC switch : briefly.
warning lamp å in the instrument cluster comes on. The message ESC-OFF appears in the multifunction display. G Warning! When the ESC OFF warning lamp å is on, the ESC is switched off. When the ESC warning lamp ÷ and the ESC OFF warning lamp å are on continuously, the ESC is not operational due to a malfunction.
The Trunk Wing remains extended as long as the vehicle speed is above 50 mph (80 km/h). Once the vehicle speed is below 50 mph (80 km/h), the Trunk Wing retracts automatically. Trunk Wing switch : flashes for as long as the Trunk Wing retracts. It goes out when the Trunk Wing is fully retracted.
X Arming: Lock the vehicle with the SmartKey. The turn signal lamps flash three times and an acoustic warning sounds three times to indicate that the vehicle is locked.
68 BA 197 USA, CA Edition A 2011; 1; 27, en-US hereepe Version: 3.0.3.5 2010-03-24T15:31:10+01:00 - Seite 68.
Introduction ......................................... 70 At a glance ........................................... 72 System Settings .................................. 92 Navigation (Introduction) ................... 99 Navigation (Destination Input) .
Introduction Where to Find it This operator's manual has been designed to help you use your COMAND control unit in all situations. Since not all models have the same standard equipment, your COMAND system equipment may deviate from some descriptions and illustrations.
X This symbol points to instructions for you to follow. A number of these symbols appearing in succession indicates a multiple-step procedure. O The continuation symbol marks an interrupted procedure which will be continued on the next page. ( Y page 11) This symbol tells you where to look for further information on this subject.
is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
Components of COMAND COMAND comprises: R the COMAND display R the COMAND control unit with DVD changer R the COMAND controller with the Back and Clear button You can use COMAND to operate the followin.
Menu Overview Having selected a main function, you will find the submenu line at the bottom edge of the COMAND display. If one of the main functions such as Navigation, Audio, Video or Phone is currently selected, additional menus are available from the main function line ( Y page 74).
You can determine basic settings for the map display, route calculation and route guidance functions in Navigation . i You can call up functions such as destination entry and the destination memory at the bottom of the COMAND display in the Navigation Submenu line.
Function Page 1 ó Switch to radio mode 169 Switch wavebands 170 2 e Switch to Last selected medium in DVD changer 184, 201 Memory Card 181 Music Register 189 Media Interface 194 3 Disc slot CD/DVD lo.
Function Page c K Accept a call 158 Dial a call 159 Redial 159 d ö Open the system menu 92 e ÷ Switch to telephone mode 152 f I Reject a call 158 End an active call 160 Reject a waiting call 158 Fun.
COMAND controller operation You can operate the COMAND controller in the following ways: R press briefly or press and hold n R rotate clockwise or counter-clockwise y m z R slide to the left or right .
Symbol COMAND controller operation Function (example) Slide and hold R Move through a navigation map o m p Slide R Move through horizontal menus R Exit vertical menus R Switch to the next/previous tra.
Multifunction Steering Wheel Function 1 Multifunction display 2 W Volume up X Volume down 8 Mute ~ End and reject calls 6 Accept and iniate calls 3 ? Activate Voice Control Function 4 % Press briefly:.
Operating the Multifunction Display G Warning! A driver’s attention to the road and traffic conditions must always be his/her primary focus when driving.
Route Guidance Inactive 1 Direction of travel 2 Current road The road you are currently driving on only appears if it is in the map software. Route Guidance Active No Maneuver Announced 1 Distance to .
appears, for example, with relatively large special destinations. R New Route... : the system is calculating a new route, for example because you have deviated from the previous route. Route guidance is subsequently resumed. R Calculating Route : a route is being calculated, after which route guidance will start.
1 Current scene X To select the next or previous scene: Briefly press 9 or : . X To search for the next or previous scene: Press and hold 9 or : . Tel Menu G Warning Some jurisdictions prohibit the driver from using a cellular telephone while driving.
X If only one telephone number is stored for a name: Press 6 or a to start dialing. The message Connecting Call... and the selected number appear in the multifunction display. The name also appears, provided it is stored in the phone book. The selected number is stored in the CALLS DIALED list in COMAND ( Y page 156).
Selecting Menu Item Example 1: Radio, Station Memory 1 Selection bar Selecting Menu Item X Rotate y m z or slide q m r . The selection bar moves up and down within the list. Confirming Menu Item X Press n . Exiting the Menu Without Selecting X Slide o m p in the opposite direction to the direction of the list.
A possible option: X To switch predictive speller language (character set): Select ! . With Number Keypad Alternatively, you can enter characters using the number keypad (direct input). Example: X Press one of the number keys, e.g. 2 , once or repeatedly in succession.
Selecting a list entry Town list in navigation mode : G symbol for additional options X To select a town: Rotate y m z or slide q m r . X To confirm selection: Press n . A town with the G symbol exists more than once in the selected state/province or it has subentries.
Tuning to a Station Manually X Slide m r to highlight the lower menu bar. X Rotate y m z or slide o m p to select FM , AM or WB . X Tune to a station by rotating y m z or sliding o m p . The red line (tuning indicator) moves right or left and stops when a receivable station is found.
During a telephone call: X Turn the q rotary/push button. or X Press the W or X button on the multi- function steering wheel. Sound Settings You can select different sound settings for each audio and video source. The sound menu can be opened from the submenu of the desired operating mode.
The Bang & Olufsen sound system provides the following operating modes: R Radio (FM only) R Sat radio R Audio CD R Audio DVD (MLP, DTS, PCM and Dolby Digital audio formats) R MP3 (including PCMCIA.
: Current setting X Turn c V d or slide Z V Æ and highlight left , all or right . X Press W . X To exit the menu: press the % back button beside the COMAND controller. or X Slide X V Y . i Please bear the following in mind: You will achieve the best sound results on your Bang & Olufsen sound system by playing high-quality audio DVDs and CDs.
Settings Display Off Display ( Y page 93) Time ( Y page 93) Text reader speed ( Y page 94) Voice Control( Y page 95) Setting the language ( Y page 99) Bluetooth ® ( Y page 96) Rear View Camera ( Y page 99) Reset COMAND ( Y page 99) i Use this function to delete your personal data, e.
1 Sets the time 2 Current date X To set value: Rotate y m z or slide q m r . X To save setting: Press n . i If you adjust the time in 30-minute increments, the previously selected time zone and automatic time-zone switching between daylight saving time and standard time settings are lost ( Y page 94).
Voice Control Switching the Help Screen On or Off X Select System £ Settings £ Voice Control . X Select Help Window . You have switched the help window on Ç or off c . i In addition to the audible instructions, the help screen displays other information during the individualization process and the later voice control mode.
Canceling the First or Second Part of Individualization X Select Cancel . A prompt appears asking whether you really do wish to cancel. X Select Yes or No . If you select Yes , individualization will be canceled. The data from the current part is not stored.
The volume of telephone conversations can change after the phone has been connected. You can connect up to ten devices to COMAND. The connection process includes searching for the device and its subsequent authorization.
X Select the currently unauthorized device (no Ò icon yet). X Select Options £ Authorize . The input menu for the passcode appears. i The passcode is any one to sixteen-digit number which you can determine yourself. You must enter the same number in COMAND and also in the device to be authorized.
Rear View Camera COMAND shows the camera picture on the display when R the function is switched on in the System Settings menu and R the vehicle is shifted into reverse gear As soon as you shift out of reverse gear, the previous display is shown.
Safety Instructions G Warning For safety reasons, only enter a destination when the vehicle is stationary. When the vehicle is in motion, a passenger should enter the destination.
vehicle battery is no longer powerful enough, COMAND may shut off automatically during the process to protect the battery. In this case, restart the update with the engine running. You can interrupt the update process and continue it at later time. If you cancel the update process, the navigation system is not ready for operation.
Map Data is not yet installed The version release and a query as to whether the update should be carried out will be given on the display. X Select Yes or No . If No is selected, COMAND ejects the DVD automatically and the map data is not updated. X Remove the DVD from the slot.
operation. As a result, you may have to drive for some time until precise route guidance takes place. GPS Reception The correct functioning of the navigation system is also dependent on the GPS reception. In certain situations, the GPS reception may be impaired, distorted or even impossible, e.
Navi Setting Block Area SIRIUS Service 104 Navigation (Introduction) COMAND APS BA 197 USA, CA Edition A 2011; 1; 27, en-US hereepe Version: 3.0.3.5 2010-03-24T15:31:10+01:00 - Seite 104.
Submenu Overview Guide Traffic Route (with active route guidance) Pos. (with active route guidance) Position RPT. (with active route guidance) Dest. (with active route guidance) Destination Selecting .
3 Current vehicle location 4 Navigation submenu Map without activated route guidance and with menu system hidden 1 Current vehicle location 2 Set map orientation 3 Set map scale Displaying/Hiding Menu System X To hide: Slide q m and when the menu item Full screen is displayed press n .
1 Current vehicle location 2 Crosshairs 3 Information on crosshairs position 4 Set map scale i The display item 3 may for example be a road if corresponding data is available in the digital map and Current Street is activated. Or it displays the geo-coordinate position of the crosshairs if Geo- coordinates display is activated.
Same as Dynamic Route with the exception that a message appears asking you whether you want to allow the rerouting or not. R Fast Route COMAND calculates a route by minimizing the driving time without taking into acount traffic messages.
Example of map from bird's-eye view 1 Current crosshairs location 2 Currently set map orientation X To set map orientation: Display menu system if applicable ( Y page 108). X Select Navi £ Map Display . A dot R indicates the current setting. 1 Options for map orientation X Select North Up or Heading Up or Bird's-eye View .
R Incidents Road sections marked by a yellow line = with arrows: traffic slowdown possible due to incidents (e.g. road work) R Speed and Flow Road sections marked by yellow or red cars : . Yellow cars: Traffic congestion, average speed 25 – 45 mph. Red cars: Traffic congestion, average speed 5 – 20 mph.
Current Street Map with road display activated 1 Road name or road number, e.g. for highways Geo-Coordinates Display Map with geo-coordinates display activated 1 Current, rounded height above sea leve.
Read Traffic Messages Automatically You can choose whether the traffic messages relevant for the route are read automatically or whether you have to start the reading manually using the Traffic submenu. X To set: Display menu system if applicable ( Y page 106).
Displaying and Changing an Existing Block Area X To select the area you want to display or change: Slide q m r . X Select Options £ Display/Change . The map display appears with the block area marked red. X To set the map scale: Rotate y m z . X To scroll the map: Slide q m r , o m p or w m x .
Navigation (Destination Input) Introduction to Destination Input G Warning! For safety reasons, only enter a new destination when the vehicle is stationary. i It is possible to enter a destination regardless of whether route guidance is active or inactive.
R Last States/Provinces R States (U.S.A.) or R Provinces (Canada) . X To select a list: Rotate y m z or slide q m r . X Press n . The selected state/province list appears. X To selected a state/province: Rotate y m z or slide q m r . X Press n . The Enter Destination menu appears again.
You see which characters you can enter with that key. Each time you press the key, the next character is highlighted. For example, key: R Press once = A R Press twice = B R Press three times = C Wait until the character display disappears.
province/region) on the towns. The G symbol then switches to I . If no other options exist, the Enter Destination menu appears again in the display. COMAND has accepted the selected city and entered it automatically in the Enter Destination menu. Entering a Zip Code i You can only enter those zip codes that are stored in the digital map.
ZIP Code List without Predictive Speller X To select a zip code: Rotate y m z or slide q m r . X To cancel selection: Select Back and press n . or X Press the k button. X To confirm selection: Press n . If COMAND can assign the zip code to a unique address, the Enter Destination menu is displayed again.
X To select a street: Rotate y m z or slide q m r . X To cancel selection: Select Back and press n . or X Press the k button. X To confirm selection: Press n . The Enter Destination menu appears again. COMAND has accepted the selected street and entered it automatically in the Enter Destination menu.
R Canceling an entry R Switching to the list without predictive speller proceed as described under “City list with predictive speller” ( Y page 115). House Number List Without Predictive Speller X To select a house number: Rotate y m z or slide q m r .
Junction List Without Predictive Speller : G symbol for additional options X To select a junction: Rotate y m z or slide q m r . X To cancel selection: Select Back and press n . or X Press the k button. X To confirm selection: Press n . After the confirmation, the Enter Destination menu appears again.
Entering a Destination from the Destination Memory X If necessary switch to navigation mode and display menu system ( Y page 105). X Select Destination £ From Memory .
Destination Memory List without Predictive Speller X To select a destination: Rotate y m z or slide q m r . X To cancel selection: Select Back and press n . or X Press the k button. X To confirm selection: Press n . X To start route calculation: Select Start .
i The display 3 depends on the settings selected in “Text information On Map” ( Y page 110). It may display the current road if corresponding data is available in the digital map. Or it displays the geo- coordinates position of the crosshairs if Geo-coordinates display is activated.
X Select OK . X If necessary, select another category. If COMAND finds destinations, a list is displayed in the right-hand part of the screen. Here you will find the stopover destinations in the selected category.
X Select car. X Select "Mercedes-Benz" from the "make" drop-down menu. X Enter the email address you specified when you activated your mbrace account in the appropriate field.
Entering a POI in the Vicinity of the Location X In the map display with the menu system displayed, select Destination £ From POIs £ Current Position .
the vicinity of the address entered are available. R POI via name search: An alphabetically sorted list of all POIs is available. R POIs via phone number: A numerically sorted list is available.
Switching to the Main Category List Without Predictive Speller You can switch to the list at any point while entering characters. X Slide q m repeatedly until the list appears without the speller.
RESTAURANT , subcategory BREWPUB , in the vicinity of the location. 1 Direction of destination 2 Air-line distance to the destination 3 Point of interest 4 Selected category or subcategory i Depending.
i In the predictive speller 3 you can only select characters that are currently available. The set of characters that is available depends on those already entered and the data included in the digital map.
ZAGAT example description Entering a POI via the Map i If the crosshairs are visible on the map, you can enter POIs in the vicinity of the crosshairs. If the crosshairs are not visible, you can enter POIs in the vicinity of the current vehicle location.
regulations during your journey. Road and traffic rules and regulations always have priority over the navigation commands generated by the system. COMAND guides you to the destination by means of driving recommendations in the form of navigation announcements or route guidance displays.
1 Next road to be taken or sign post information 2 Visual distance indicator to the driving maneuver 3 Distance information to the driving maneuver 4 Driving maneuver (exit to the left) i The solid part of the visual distance indicator 2 reduces from bottom to top as the announced driving maneuver gets closer.
Traffic Lane Recommendations On multi-lane roads, COMAND may display traffic lane recommendations. For this there must be corresponding data available on the digital map. With respect to the next two driving maneuvers, COMAND displays the traffic lane recommendations 6 , 7 and 8 .
Route Guidance to an Off-road Destination COMAND can also guide you to destinations that are within the area covered by the digital map, but are not themselves included on the map. Such destinations are off-road destinations, which you can enter, for example, by entering the destination via the map.
As soon as the vehicle location is found again, route guidance continues in the usual manner. Navigation Announcements G Warning Navigation announcements are intended to direct you while driving without diverting your attention from the road and driving.
X To set the length of block: Select Longer or Shorter repeatedly until the required length is set. The blocked segment is highlighted in red/ white on the map. Shown at the top of the display is the length of the blocked segment and the route segment to which the block goes.
Example display with main destination and stopover destination 1 Distance/estimated time of arrival/ estimated journey time to the stopover destination 2 Stopover destination = 3 Main destination 4 Di.
Real-Time Traffic Notification Symbols Symbol Description Traffic Notifications in Map Display Traffic Report Lists Traffic Report Message Warning (red) Appears at the beginning of the affected road section if route guidance is active and route goes through the event area.
Symbol Description Traffic Notifications in Map Display Traffic Report Lists Traffic Report Message Green line with arrows Free flow No obstacles for traffic flow Appears only on the free-flow side (d.
X To display a traffic message: Select a road, area or region from the list. X To close the list: Slide o m p once or repeatedly. Example of a Traffic Message 1 Depending on your selection: Messages o.
Read-aloud Function The read-aloud function is only available when route guidance is active. It can read out traffic reports on the route. You can set the language ( Y page 99) and the read-aloud speed ( Y page 94).
Switching to the Destination Memory List Without Predictive Speller X Slide q m repeatedly until the predictive speller disappears. The entry My Address is highlighted automatically unless you have entered a character using the predictive speller.
X Select Yes or No . If you select Yes , COMAND overwrites the destination. You will see a message and then the address menu with the selected address.
X Select Save . You can now select memory options. Selecting Memory Options Saving Destination Without Name X Select Save Without Name . COMAND stores the destination in the destination memory and uses the address as the destination name. or X Select Save as My Address .
Destination from the Destination Memory” section ( Y page 122). X Select Options £ Delete . A prompt appears asking whether you wish to delete the destination. X Select Yes or No . If you select Yes , COMAND deletes the destination. You see a corresponding message.
your safety and the safety of others, we recommend that you pull over to a safe location and stop before placing or taking a telephone call. If you choose to use the mobile phone while driving, please use the handsfree device and only use the mobile phone when weather, road, and traffic conditions permit.
Under the following circumstances, the phone may not yet be useable: R If it is not yet logged into a network. The phone will try independently to log into a network. If no network is available, you will not be able to make “911” emergency calls. If you try to make an outgoing call, the message No Service appears briefly.
1 The check marks Ò indicate if a phone has been authorized (black) or not (grey) 2 Device not within range but previously authorized ( ¿ appears in grey) 3 Device within range but not yet authorized Phone icons indicate if a phone is found (black) or not (grey).
X Select COMAND (“MB Bluetooth”) on the mobile phone. X When prompted to do so, enter the passcode on the mobile phone and on COMAND. i After you have entered the passkey on COMAND and on the mobile phone, you have to trigger a connection to COMAND manually on some mobile phones.
X To set the volume: Slide q m r . The red bar moves up or down. X To confirm selection: Press n . “911” Emergency Call G Warning The 911 emergency call system is a public service.
COMAND Phone Book The COMAND phone book is an extract of entries from the address book. All the COMAND address book entries having at least one phone number can be found in the COMAND phone book. i For many operating functions you can also use the buttons on the multifunction steering wheel, e.
Initiating Call to an Entry X Select entry ( Y page 153). X Press n or X Press the 6 button on the COMAND control unit. Creating a New Entry i When a new entry is added through the COMAND phone book, it is saved to the address book. X Select Options £ New Entry in the COMAND phone book.
X Select Yes or No . The entry will either be stored or not, depending on your selection. Saving an Entry X Select d . A corresponding message is displayed.
made during phone mode when a mobile phone is connected to COMAND. The particular menu item can only be selected if calls have already been received or made from COMAND. The display of missed calls in the COMAND display is not possible with all mobile phones.
Saving in the Address Book as a New Entry X Select the list entry. X Select Options £ Save £ New Entry . i Save has no function if the selected list entry is already stored in the address book. X Select a number category, e.g. Home . X Select a telephone category, e.
X To delete an entire entry: Select õ and press n until the entire entry has been deleted. or X Press the 2 button next to the COMAND controller and hold it until the entry is deleted. X To save entry: Select d . A corresponding message is displayed.
X To reject: Select Reject . or X Press the I button on the COMAND control panel or the ~ button on the multifunction steering wheel. X To accept: Select Accept . or X Press the K button on the COMAND control panel or the 6 button on the multifunction steering wheel.
Initiating a Call to a Call List Entry or COMAND Phone Book Entry X Call up a call list and select an entry ( Y page 156). or X Open the COMAND phone book and select an entry ( Y page 153).
Only use the COMAND when road and traffic conditions permit you to do so. Otherwise you could be involved in an accident in which you or others could be injured. General Information The entries of the address book can be used for making phone calls and for setting navigation destinations.
Input menu with data fields 1 Selected data field with cursor 2 Input speller Switching Data Field X Slide q m repeatedly until the input speller is hidden. X Then slide q m r and press n . or X Select [ or ] in the input speller. The input menu indicates the selected data field.
Search menu with predictive speller 1 ¥ Symbol for address book entry 2 ¤ Symbol for complete address data from the navigation 3 ¦ Symbol for voice name 4 å Symbol for phone book entry from the mobile phone 5 Predictive speller Entries without symbols or with the symbols 1 and 3 are just address book entries.
Searching via the List X If necessary, switch from the predictive speller to the list ( Y page 162). X Turn y m z or slide q m r until the desired entry is highlighted in the list. Deleting Entry X Search for the required entry ( Y page 162). X Select Options £ Delete .
Changing Entry Changing an Address Book Entry X Search for the address book entry ( Y page 162). X Select Options £ Change Entry . or X Display details about an address book entry. X Select Options £ Change Entry . The input menu with data fields appears.
1 Address that supports navigation 2 Opens Enter Destination menu The Enter Destination menu appears, the selector bar is located at the menu item Start ( Y page 121). Voice Names i Voice names can be entered via Voice Control System. Adding Voice Name i You can add one voice name per address book entry.
External Bluetooth ® device R Bluetooth ® is activated in COMAND and on the Bluetooth ® device (see operating instructions of the device). R The Bluetooth ® device can send vCards via Bluetooth ® (see operating instructions of the device). R The Bluetooth ® device in the vehicle is switched on.
X Select Download Contacts . A selection menu appears. X Select Receive Business Cards . This interrupts the Bluetooth connection between COMAND and your active mobile phone. COMAND is ready to receive vCards from another Bluetooth ® device. X Start data transfer on the external Bluetooth device (see operating instructions of the device).
Display with Audio menu 1 Current audio mode 2 Main function line 3 Audio menu You can switch to the various audio modes in the audio menu: R FM / AM radio mode ( Y page 169) R SatRadio mode ( Y page .
Submenu Overview Radio (FM and AM only) Presets (FM and AM only) Channel (WB only) Info FM Sound Enter Frequency Autostore List of receivable channels Program Information FM Treble Ç Show Station Inf.
Tuning to a Station via Station Search X Rotate y m z or slide o m p when the main area is highlighted. or X Press E or F on the COMAND control unit. The search proceeds upwards or downwards and stops at the next receivable station. Tuning to a Station via Manual Frequency Input X Select Radio £ Enter Frequency in the radio display.
X Press n when the main area is active. X Select Autostore . or X Select Presets £ Autostore in the radio display. COMAND searches for receivable stations. A corresponding message is displayed. The available stations are automatically stored under the presets.
Program Information i This feature is only available for analog FM and programs. Information on the current program is normally displayed above the submenu line. X To display the program information in the main area: Select Info in the radio display submenu.
displays the Weather channel. You cannot select any other station. X Select SatRadio (from the submenu) £ Service . The Service information display will appear.
Satellite radio main menu 1 SatRadio main display 2 Channel name 3 Memory preset number 4 Selected category/channel number 5 Track info (short) 6 Sound settings 7 Category list 8 Channel info (detaile.
Entering a Channel Number Directly X Select SatRadio £ Enter Channel in the SatRadio menu. An input dialog appears. or X Press õ on the control unit. X To enter a channel: Press corresponding number buttons on the control unit. COMAND will tune to the channel entered.
1 Category 2 Channel 3 Artist 4 Song title You will see (if available) R the full name R additional information X To switch back to the SatRadio main display: Slide o m p . Displaying Service Information You can call the provider service center for questions or releases whenever you need.
Notes on MP3 Mode Permissible Storage Media R CD-R and CD-RW R DVD+R and DVD+RW R DVD-R and DVD-RW R PCMCIA memory card Permissible File Systems R ISO9660/Joliet for CD storage media R UDF for DVDs R .
i Audio DVDs differ from recordable DVD-R and DVD-RW discs. Data on Audio DVDs are stored either in uncompressed format or in lossless compressed format. The sound quality on Audio DVDs is therefore better than on recordable DVDs that contain MP3 data because the MP3 format uses a lossy type of compression.
Notes on the Care of CD/DVD Discs R Only touch the discs at the edges. R Handle discs with care in order to prevent malfunctions during playback. R Avoid scratching, leaving fingerprints and dust on the discs. R Clean the discs occasionally with a commercially available cleaning cloth.
Only insert one CD per magazine compartment. X Insert a disc into the slot with the printed side upwards. The DVD changer pulls in the disc and places it in the selected magazine compartment. The message Loading Disc <x> will be displayed. i The loading process may take a while, depending on the type of disc.
distracted from road and traffic conditions if you load a memory card while the vehicle is in motion. Bear in mind that at a speed of just 30 mph (appr. 50 km/h), your vehicle is covering a distance of 44 feet (appr. 14 m) every second. COMAND supports 16-bit full-size type I and II PCMCIA memory cards.
X Remove the disc from the slot. If you do not remove the disc from the slot, the DVD changer will automatically pull it back in after a short while and resume playback. Ejecting All Discs X Press the Eject 8 button. The magazine menu appears. X Select Eject All .
Menu Overview CD or DVD-A or MP3 Only with DVD- A: « / ± / X Track list or Folder Media Sound Normal track sequence « Pause playback Display track list (CD Audio/ DVD Audio mode only) Media selecti.
Within the Audio Function X Select Audio £ Disc or Memory card in the audio menu display. i Disc accesses audio discs in the DVD changer. Memory Card selects the slot for the PCMCIA memory card. X Select CD/DVD Audio/MP3 as required ( Y page 186). The desired disc mode is activated.
7 Sound settings 8 Media selection 9 Current folder a Display folder list b Disc position in the media list c Playback options i An example of a media list display can be found on ( Y page 186). Stop Function i This function is only available in DVD Audio mode.
Selecting a Track i For many operating functions you can also use the buttons on the multifunction steering wheel, e.g. the 9 , : buttons, for selecting a track, a menu or scrolling through lists ( Y page 81). Selection via Track Skip X To skip forwards or backwards to a track: Rotate y m z when the main area is highlighted.
1 Disc name (if stored on disc) 2 Current folder 3 Folder symbol X To select a folder: Rotate y m z or slide q m r . X Press n . The tracks of the folder appear. X To select a track: Rotate y m z or slide q m r . X Press n . The track is played and the corresponding folder is now the active folder.
center by means of a DVD or perform the update process yourself. i The Gracenote ® Media Database is updated at the same time as the map software ( Y page 100). Setting Audio Format It is only possible to set the audio format in DVD Audio mode. The number of available audio formats depends on the DVD.
Music files available: You will hear the first track of the first folder found or playback will start from the point listened to last. 1 Storage media type — Music Register Ñ 2 Track number 3 Track.
X To select folder: Rotate y m z or slide q m r . X Press n . i If you do not select a destination folder before recording, a new folder will be created. Start the Recording X Rotate y m z or slide o m p until Start is highlighted. X Press n . In the display information about source, destination and progress of the recording is shown.
Deleting Folders/Track X Select Folder . X To select a folder/track: Rotate y m z or slide q m r . X Select Options £ Delete . A query appears. No is highlighted. X Do not delete: Press the n button. X To delete: Select Yes and press n . A message appears.
Supported Data Formats (USB devices) The following data types are supported: R MP3: CBR, VBR (up to 320 kbit/s) R WMA: CBR, VBR (up to 320 kbit/s) In order to display the metadata during playback, ID3 tags (version 1.x, 2.3, 2.4) and WMA tags in ASCII and UTF16 coding are supported.
If necessary, consult a Mercedes-Benz Service Center. Switching to Media Interface From Another Main Function X Select Audio £ Audio £ Media Interface in the audio menu display. i If you previously selected operation with Media Interface, you need only select Audio .
Selecting Music Files i COMAND displays the data stored on the iPod ® , MP3 player or USB mass storage device in the storage structure used in the medium in question. Selecting by Skipping to a Track X To skip forwards or backwards to a track: Slide o m p .
the coded music data should be displayed or whether the file name and directory should be displayed during playback. X Select Media Interface £ Display Metadata . Selecting a Category and Opening a Folder X To open a category list/folder: Press n when the main area is highlighted.
This function is not available within playlists, for example. X Select a category, e.g. artists. The available artists appear. X Press the corresponding number key once or repeatedly to select the initial letter of the desired artist. For example, to select an artist whose name begins with C, press the number key "2" three times.
Switching to Audio Aux Mode From Another Main Function X Select Audio £ Audio £ Aux in the audio menu display. i If the last mode was audio Aux mode, you only need to select Audio . Within the Audio Function X Select Audio £ Aux . The Audio Aux menu appears.
Vehicle Equipment i This Operator’s Manual describes all features, standard or optional, potentially available for your vehicle at the time of purchase. Please be aware that your vehicle might not be equipped with all features described in this manual.
Functional Restrictions It may be the case that some functions or actions may not be possible at certain times, or may not be possible in general, depending on the DVD. When you activate such functions or actions, this is indicated by the 7 in the display.
Submenu Overview DVD-Video « / X ± Media Sound DVD functions « Pauses playback ± Stops playback Medium selection Treble Brightness X Resumes playback Bass Contrast X Restarts playback Balance Color Surround sound 16:9 Optimized 4:3 Widescreen DVD Video Switching to DVD Video From the Control Panel X Insert a DVD Video ( Y page 180).
Displaying/Hiding Menu System X To show: Press n . or X When the control menu is shown, select Menu . X To hide: Slide q m and select Full screen . Menu system displayed 1 DVD Video menu 2 Pause funct.
Pause Function X In DVD Video mode, display the menu system if necessary ( Y page 202). X To pause playback: Select « . The display « changes to X . X To resume playback: Select X . Playback continues from the point where it was paused. The menu system is hidden.
i Menu items which cannot be selected are greyed out. X To confirm selection: Select Select . COMAND will perform the action or displays a submenu represented by the menu item selected in the DVD menu. If necessary select from further options in the same way.
Setting the Language and Audio Format i This function is not available on all DVDs. Where available, you can set the DVD menu language and the audio language or audio format. The number of possible settings is dependent on the DVD content. It is possible that the settings may also be accessed in the DVD menu ( Y page 203).
i In vehicles equipped with a rear view camera, the Video Aux connection cannot be used for external video sources. Switching to Video Aux From Another Main Function X Select Video £ Video £ Video Aux i If Video Aux mode was active last, you only need to select Video .
Traffic regulations always have priority over any route recommendations given. Bear in mind that at a speed of just 30 mph (approximately 50 km/h), your vehicle is covering a distance of 44 feet (approximately 14 m) every second.
Operating Voice Control 1 Multifunction display 2 x Mute, X decreases the volume, W increases the volume 3 ? Activates voice control ? % Cancels voice control Starting the Dialog X Switch on the ignition (see the vehicle Operator's Manual).
X Press the W or X button. The volume increases or decreases during voice output. or X Set the volume for the voice output on the volume control for COMAND. Display Messages The audible help function can be supplemented by visual help on the display ( Y page 95).
i You can still operate your phone using the keypad. Commands “Phone” Use the “Phone” command to select the phone application. Use this command if you wish the digits entered to be shown on the display. “Help Phone” Voice control has an extensive help function.
s Okay t Dialing number “Delete” While you are entering a number, you can use the “Delete” command to delete all the digits which have been entered. After you have input this command, voice control prompts you to enter additional digits or commands.
Navigation G Warning! For safety reasons, you should only select a destination when the vehicle is stationary. While the navigation system provides directional assistance, the driver must remain focused on safe driving behavior, especially pay attention to traffic and street signs, and should utilize the system’s audio cues while driving.
Entering an Address i If voice control fails to recognize your entry, it is advisable to spell the name of the town and street. Spell names of towns and streets when abroad.
Example of dialog: s Enter town t Please say the name of the town s Albany t Loading list of towns u The system shows a numbered list of possible town names on the display.
“Correction” If you have entered or spelled a city or street, you can use the “Correction” command to enter the city or street again or spell it from the beginning. “Enter Intersection” You can use the “Intersection” command to specify an intersection of two streets.
Example of dialog: s Point of interest u The system shows the following list in the display: t Please select a line number s Line number 1 ... t Line number 1 accepted u The system shows a numbered li.
t Where would you like to save: home or work? s Work t The destination has been saved. “Find Address” You can use the “Find address” command to select a previously saved address and start route guidance.
X To select an entry and set an address: Press the ? button at the selected entry. t If there is more than one address, the system asks “Navigate to: home or work?” s Home The system starts route guidance. X To cancel the dialog: Press the % button.
Commands “Address Book” X To open the address book: Say the command “Address book”. “Help Address Book” X Using the “Help address book” command, you can have all the essential commands for the address book read out. “Save Name” Use the “Save name” command to save a phone number with a voice name for a specific speaker.
s Smith u The system shows a numbered list in the display. t Please select a line number. s Line number 1 ... t Line number 1 accepted. The system opens the first entry on the list. If the selected entry contains at least one phone number or an address, voice control asks whether you want to dial the number or navigate to the stored address.
Say the letters in the form of a continuous string of letters (five to seven letters). A list of possible entries will appear in the display and you can choose the one you require. Example of dialog: s Spell entry t Please spell the name. s S-M-I-T-H u The system shows a numbered list in the display.
Selecting a Waveband You can set the waveband with the following commands: R “FM” R “AM” “Next Station”/“Previous Station” You can start manual tuning and set the next station using th.
“Category News” (Satellite Radio) Use this command to select a satellite radio category. Example of dialog: s Category news u Voice control sets the category “Enter Channel Number” (Satellite Radio) Use the command “Enter channel number” to select a satellite radio category.
DVD Changer G Warning Please devote your attention first and foremost to the traffic situation you are in. Before your journey, please familiarize yourself with the disc functions. Only use the Voice Control System when road and traffic conditions permit you to do so.
“DVD Video” With the “DVD video” command, you can start a Video DVD on the COMAND system. “Music Register” With the “Music register” command, you can change to the internal music register (hard disk) of COMAND.
R Help CD changer R Help DVD R Help DVD changer R Help DVD audio R Help DVD audio changer R Help MP3 R Help MP3 changer R Help navigation R Help route guidance R Help nav Phone Commands R Phone R Tele.
R Spell town R Spell name of town R District R Enter district R Center R Enter center R Spell district R Spell center R Enter intersection R Intersection R Point(s) of interest/POI(s) R Enter point(s).
R Landline R Landline phone R Mobile R Mobile phone R Work car R Work car phone R Car phone work/office/business/ company R Work/office/business/company/ landline R Work/office/business/company/ landl.
R Delete station list R Previous station R Last station Satellite Radio (SIRIUS XM) R Satellite Radio on/SIRIUS on R Next station R Other channel R Channel <voice_name> R Delete channel R Save c.
Memory Card R Memory card DVD Audio R DVD audio R DVD audio changer on R Next DVD audio R Other DVD audio R Previous DVD audio R Last DVD audio R Next directory R Other directory R Previous directory .
Trouble Shooting Problem Possible Cause/ Consequence Suggested Solutions Voice control does not understand you. You have not operated the system from the driver’s seat. X Only operate the system from the driver’s seat. You have spoken too exaggeratedly, too loudly or too quietly.
Problem Possible Cause/ Consequence Suggested Solutions The sound of the voice names in the address book is not sufficiently different. X The voice names entered in the address book must sound as different as possible, e.g. store the names White and Wright as “Mr White office” and “Mr Wright John”.
You can also request the help function for a specific system, for example with the “Help phone” command. If you have activated the help window, you will see a selection of the possible commands on the display ( Y page 95). Voice Control 233 COMAND APS BA 197 USA, CA Edition A 2011; 1; 27, en-US hereepe Version: 3.
234 BA 197 USA, CA Edition A 2011; 1; 27, en-US hereepe Version: 3.0.3.5 2010-03-24T15:31:10+01:00 - Seite 234.
Vehicle equipment ............................ 236 Locking and unlocking ..................... 236 Starter switch positions ................... 241 Seats .................................................. 243 Multifunction steering wheel .......... 245 Mirrors .
Vehicle equipment i This Operator’s Manual describes all features, standard or optional, potentially available for your vehicle at the time of purchase. Please be aware that your vehicle might not be equipped with all features described in this manual.
The product label with FCC ID and IC certification number can be found in the battery case. i Canada only: This device complies with RSS-210 of Industry Canada. Operation is subject to the following two conditions: 1. This device may not cause interference, and 2.
X Have the SmartKey deactivated by an authorized Mercedes-Benz Center. X Report the loss of the SmartKey or the mechanical key to your car insurance company immediately. X Have the mechanical lock replaced if necessary. Any authorized Mercedes-Benz Center will be glad to supply you with a replacement.
Example illustration driver’s door X Press central unlocking switch ( Y page 239). or X Pull locking knob : up. X Pull on inside door handle ; on the respective door. X Swing the door up as far as it will go. Automatic central locking The doors lock automatically when the vehicle is set into motion.
Opening the trunk from the outside X Press button F on the SmartKey. The trunk unlocks and opens slightly. X Reach into the gap and lift the trunk lid. If the trunk does not open, it is still locked separately ( Y page 241). Opening the trunk from the inside You can open the trunk when the vehicle is stationary.
X Briefly press emergency release button : . The trunk lid unlocks and opens slightly. X Push up the trunk lid to fully open. The emergency release button unlocks the trunk while the vehicle is standing still or in motion. Illumination of the emergency release button: R The button flashes for 30 minutes after opening the trunk.
corresponds to the various starter switch positions ( Y page 242). Pressing the KEYLESS-GO start/stop button with the brake pedal firmly depressed will start the engine ( Y page 258).
beam headlamp indicator lamp, high-beam headlamp indicator lamp, and the turn signal indicator lamps will only come on if activated. If a lamp in the instrument cluster fails to come on when the ignition is switched on, have it checked and replaced if necessary.
G Warning! Children 12 years old and under must be seated and properly secured in an appropriately sized infant restraint, toddler restraint, or booster seat recommended for the size and weight of the child. For additional information, see section “Children in the vehicle”.
Seat heating The red indicator lamps in seat heating switch : come on to show which heating level you have selected. The seat heating switches from level 3 (high) to level 2 after approximately 5 minutes. The seat heating switches from level 2 to level 1 (low) after approximately 10 minutes.
The easy-entry/exit feature can be activated or deactivated in the Convenience submenu of the control system ( Y page 286). G Warning! You must make sure no one can become trapped or injured by the moving steering wheel when the easy-entry/exit feature is activated.
rear view mirror and glance over your shoulder before changing lanes. i You can store the settings for the exterior rear view mirror position with the memory function ( Y page 249). X Switch on the ignition. X Press button : for the driver’s side exterior rear view mirror or button ; for the passenger-side exterior rear view mirror.
X Press button ; , to select the passenger- side exterior rear view mirror. X Adjust the passenger-side exterior rear view mirror with adjustment button = so that you see the rear wheel and the road curb. The exterior rear view mirror parking position is stored.
The exterior rear view mirrors fold out automatically as soon as the vehicle is unlocked and the driver’s or passenger door is subsequently opened. Memory function Notes With the memory function you can store up to three different configurations per front seat.
Exterior lamp switch 1 W Standing lamps, left 2 X Standing lamps, right 3 T Parking lamps 5 Daytime running lamp mode 4 c Automatic headlamp mode Daytime running lamp mode 5 L Low-beam headlamps or hi.
Once the low-beam headlamps are on, the high-beam headlamps are also available. Daytime running lamp mode In Canada, the daytime running lamp mode is mandatory and therefore in a constant mode. In the USA, the daytime running lamp mode is activated by default.
To signal minor directional changes: X Press the combination switch only to the point of resistance in direction of arrow ; or ? and release. The corresponding turn signal lamps will flash three times. High beam X Turn the exterior lamp switch to position L ( Y page 250).
Interior lighting : ~ Automatic control on/off ; p Right reading lamp on/off = c Interior lighting on/off ? p Left reading lamp on/off Automatic control X Activating: Press button ~ .
Switching on/off Combination switch 1 $ Windshield wipers off 2 Ä Slow intermittent wiping 7 3 Å Fast intermittent wiping 8 4 ° Slow continuous wiping 5 ¯ Fast continuous wiping B í Single wipe/ î Wiping with washer fluid X Switch on the ignition.
For information on filling up the washer reservoir, see “Washer system and headlamp cleaning system” ( Y page 325). For information on cleaning the headlamps with washer fluid, see “Headlamp cleaning system” ( Y page 252). Problems with wipers ! If anything blocks the windshield wipers (leaves, snow, etc.
X Switch on the ignition. X Opening/closing: Press or pull and hold switch : or ; to the resistance point. The corresponding door window moves downward or upward until you release the switch. X Express operation: Press or pull switch : or ; past the resistance point and release.
X Aim the transmitter eye of the SmartKey at the driver’s outside door handle. X Press button % on the SmartKey to unlock the vehicle. Keep button % pressed until the door windows have reached the desired position. X Release button % on the SmartKey to interrupt the opening procedure.
Starting the engine G Warning! Inhalation of exhaust gas is hazardous to your health. All exhaust gas contains carbon monoxide (CO), and inhaling it can cause unconsciousness and possible death. Do not run the engine in confined areas (such as a garage) which are not properly ventilated.
The engine does not start. You can hear the starter. There could be a malfunction in the engine electronics or in the fuel supply system. Carry out the following steps: X If you are starting the engine with the SmartKey: Turn the SmartKey in the starter switch to position 0 and repeat the starting procedure.
premature brake and drivetrain wear which is not covered by the Mercedes-Benz Limited Warranty. i Once the vehicle is in motion, the automatic central locking function engages and the locking knobs in the doors move down.
If the extent of the damage cannot be determined: X Contact an authorized Mercedes-Benz Center or call Roadside Assistance. If no damage on major assemblies, fuel system, and engine mount can be determined: X Start the engine in the usual manner.
i If you have not fastened your seat belt, the following conditions must be met in order for the electronic parking brake to release automatically: R The driver’s door is closed and you shift the transmission out of park position P . or R The driver’s door is closed and you drive faster than 2 mph (3 km/h).
The transmission will remain in neutral position N for approximately 30 minutes when you have shifted the transmission to neutral position N before turning off the engine.
Without the brake pedal depressed, the gear selector lever can be moved up or down, but the parking pawl remains engaged, not allowing shifting to occur. i The gear selector lever always returns to its original position. The current transmission position P , R , N , or D appears in the multifunction display ( Y page 265).
Transmission positions The current transmission position appears in the multifunction display. : Transmission position indicator If the current transmission position does not appear in the multifunction display due to a malfunction, for example, make sure that the transmission is in the desired position.
Effect A Neutral position No power is transmitted from the engine to the drive axle. When the brakes are released, the vehicle can be moved freely (pushed or towed). To avoid damage to the transmission, never shift the transmission into neutral position N while driving.
Automatic shift program Program mode selector dial C Comfort For standard driving S Sport For sporty driving S+ Sport Plus For sporty driving with shorter shift times M Manual For manual gearshifting ( Y page 268) RS RACE START For optimum acceleration from a standing start i Program mode RS cannot be selected while driving.
i You cannot shift with the steering wheel gearshift control when the transmission is in park position P , neutral position N , or reverse gear R . Limiting gear range G Warning! On slippery road surfaces, never downshift in order to obtain braking action.
Program mode selector dial C Comfort For standard driving S Sport For sporty driving S+ Sport Plus For sporty driving with shorter shift times M Manual For manual gearshifting RS RACE START For optimum acceleration from a standing start i Program mode RS cannot be selected while driving.
The white segments : and the yellow segment ; come on in succession from left to right. The optimal moment to upshift is reached when the red segments = come on and the message up appears in the multifunction display: X Shift the transmission from current gear into the next higher gear.
Instrument cluster Introduction For a full view illustration of the instrument cluster, see “Instrument cluster” ( Y page 34). G Warning! No messages will be displayed if either the instrument cluster or the multifunction display is inoperative.
Control system Introduction The control system is activated as soon as the starter switch is in position 2 . The control system enables you to call up information about your vehicle and to change vehicle settings.
Press button briefly 9 : to select submenu or scroll through lists within Audio menu to select previous or next track, scene or stored station within Tel menu to switch to the phone book and select a .
? Line for main menus A Digital clock/outside temperature indicator Settings, functions, submenus as well as any malfunctions appear in the text field. For more information on menus displayed in the multifunction display, see “Menus and submenus” ( Y page 275).
Menus and submenus Function : Trip menu ( Y page 275) ; Navi menu ( Y page 277) = Audio menu ( Y page 168) ? Tel menu ( Y page 280) A Service menu ( Y page 281) B Settings menu ( Y page 282) C AMG men.
In the standard display, the trip odometer : and the main odometer ; appear in the multifunction display. If another display appears instead of the standard display: X Press button = or ; to select the Trip menu. or X Press button % repeatedly until the standard display appears.
X Press button : to select Yes . X Press button a to confirm. Remaining driving range X Press button = or ; to select the Trip menu. X Press button : or 9 to select the estimated remaining driving range. Note that the values are calculated based on the current fuel tank level and the current driving style.
Driving maneuver announced without lane advice Example illustration : Street into which the driving maneuver leads ; Distance to driving maneuver and graphical distance representation = Symbol for driving maneuver When you are being notified of a driving maneuver, you will see a visual distance display next to the driving maneuver symbol ; .
The vehicle is either on a road that has not been digitized ( Y page 135) or on the side of a road, e.g. in a parking space. R No Route The COMAND system cannot calculate a route to the selected destination. R Direct. of Dest. The vehicle has gone off the map during route guidance ( Y page 135).
Example illustration : Disc number ; Current track X Selecting next or previous track: Press button : or 9 briefly. X Selecting a track from the track list (quick search): Press and hold button : or 9 . The current track does not appear during Audio AUX mode operation.
Example illustration X Press button 6 . You have answered the call. The caller’s number appears only if it is transmitted. The caller’s name appears only if the number and the name are stored in the phone book. Ending a call or rejecting an incoming call X Press button ~ .
R Vehicle status message memory ( Y page 282) R Checking tire inflation pressure electronically with the Advanced TPMS ( Y page 329) R Calling up the maintenance service indicator display ( Y page 353.
X Press button : or 9 to select Yes or No . Select Yes if you want to reset to factory settings. X Press button a to confirm. The confirmation message appears in the multifunction display. Submenus in the Settings menu X Press button = or ; to select the Settings menu.
X Press button a to change the setting. Depending on the previous setting the Display Unit Speed-/Odometer: will be set to miles or km . The selected display unit is valid for: R Odometer and trip odo.
position $ or c , the daytime running lamps are switched on when the engine is running. In low ambient light conditions the following lamps will come on additionally: R Low-beam headlamps R Parking lamps R Tail lamps R License plate lamps R Side marker lamps For more information on the daytime running lamp mode, see ( Y page 251).
X Press button a to change the current status. Depending on the previous status, the Locator Lighting: function will be Enabled or Disabled . You can temporarily deactivate the headlamps delayed shut-off feature: X Before exiting the vehicle, set the starter switch to position 0 using the KEYLESS-GO start/stop button.
wheel when the easy-entry/exit feature is activated. To stop steering wheel movement, move steering wheel adjustment stalk or press one of the memory position buttons. Do not leave children unattended in the vehicle, or with access to an unlocked vehicle.
176‡ (80†). During this time, avoid driving at full engine speed. Use buttons : or 9 to select the following functions in the AMG menu: R SETUP ( Y page 288) R RACETIMER ( Y page 288) R Overall analysis ( Y page 289) R Lap analysis ( Y page 289) SETUP SETUP indicates the current driving program mode and the ESC mode.
The RACETIMER begins timing the new lap. The new lap begins to be timed as soon as the intermediate time is called up. : RACETIMER ; Best lap time = Lap number Resetting current lap X Press button W while the timer is running. The timer stops. X Press button X .
= Average speed during lap ? Lap length A Maximum speed during lap X Press button : or 9 to see other lap analyses. Driving systems Introduction This section describes the following driving systems of.
R when the transmission is in park position P , reverse gear R , or neutral position N R the ESC is switched off or has switched off due to a malfunction The vehicle speed displayed in the speedometer can briefly vary from the speed setting for the cruise control system.
increments each time you lift or press the cruise control lever up or down to the resistance point. X Increasing: Briefly lift the cruise control lever up to the resistance point in direction of arrow : . X Decreasing: Briefly press the cruise control lever down to the resistance point in direction of arrow ; .
Activating RACE START X Depress the brake pedal with your left foot and keep it depressed. X Turn the program mode selector dial clockwise ( Y page 267) until the RS lamp on the dial comes on. The message RACE START Confirm: Paddle UP Cancel: Paddle DOWN appears in the multifunction display.
Parktronic system The Parktronic system is an electronic parking aid with ultrasonic sensors designed to assist the driver during parking maneuvers. The Parktronic system indicates the relative distance between the vehicle and an obstacle visually and audibly.
Front sensors Center approx. 40 in (100 cm) Corners approx. 24 in (60 cm) Rear sensors Center approx. 48 in (120 cm) Corners approx. 32 in (80 cm) Minimum distance Center approx.
As your vehicle approaches an object, one or more distance segments will illuminate, depending on the distance. When the seventh distance segment illuminates, you have reached the minimum distance.
G Warning! The rear view camera is only an aid and may display obstacles R from a distorted perspective R inaccurately R may not display obstacles at all The rear view camera does not relieve you of the responsibility to be cautious. Take care and pay careful attention.
Climate control system Control panel Dual-zone automatic climate control Function Recommendation/Notes : Temperature control, driver’s side i Set the temperature to 72‡ (22†). ( Y page 300) ; Air distribution and air volume (automatic mode) i Switch on the automatic mode.
Function Recommendation/Notes F Increasing air volume ( Y page 302) G Decreasing air volume ( Y page 302) H Display I Air distribution ( Y page 302) Notes on climate control system The climate control system is operational whenever the engine is running.
Air conditioning The air conditioning is operational while the engine is running and cools the interior air to the temperature set by the operator. In addition, the air conditioning dehumidifies the interior air and helps prevent window fogging.
X Increasing/decreasing: Turn temperature controls : and D ( Y page 298) slightly clockwise or counterclockwise. Adjusting air vents G Warning! When operating the climate control, the air that enters the passenger compartment through the air vents can be very hot or very cold (depending on the set temperature).
X Opening side air vent: Turn the cross in side air vent ? in the direction of the arrow to position 1 . X Closing side air vent: Turn the cross in side air vent ? in the direction of the arrow to position 2 . i Side air vent ? is never closed completely, even when side defroster air vent = is closed.
Windshield fogged on the outside X Switch the windshield wipers on ( Y page 253). If the automatic mode of the climate control is switched off: X Press button _ repeatedly until one of the following symbols P or O appears in display H ( Y page 298). Maximum cooling MAX COOL MAX COOL is only available in U.
X Activating: Adjust the air temperature, air volume and air distribution. X Press button ¸ . The indicator lamp in the button comes on. The driver-side settings are used for the passenger side. X Deactivating: Press button ¸ again. The indicator lamp in the button goes out.
X Closing: Push glove box lid ; upwards until it engages. Locking/unlocking the glove box separately You can lock the glove box, e.g. when the vehicle is in the shop for service. The glove box can only be locked or unlocked with the mechanical key. X Remove the mechanical key from the SmartKey ( Y page 397).
Rear storage compartment in center console X Press button : . The cover opens automatically. Storage pocket on the rear panel A storage pocket is located at the rear panel between the seats.
: Vanity mirror lamp ; Mounting = Holder, e.g. for gas cards ? Vanity mirror A Vanity mirror cover Glare through the windshield X Flip sun visor down when you experience glare. Glare through a door window X Close vanity mirror cover A if opened. X Disengage sun visor from mounting ; .
If the engine is off and the cigarette lighter is being used extensively, the vehicle battery may become discharged. X Switch on the ignition. X Opening: Tap on center of cover : . The cover opens automatically. X Push in cigarette lighter ; . Cigarette lighter ; will pop out automatically when hot.
steps may result in a system that is not activated. If you have any questions regarding activation, please call the Response Center at 866-990-9007 (USA only) or 1-888-923-8367 (Canada only). Shortly after the completion of your mbrace acquaintance call, you will receive an account number via email.
call. Failure to complete either of these steps may result in a system that is not activated. If you have any questions regarding activation, please call the Response Center at 866-990-9007 (USA only) or 1-888-923-8367 (Canada only).
X Terminating calls: Press button ~ on the multifunction steering wheel. or X Press the respective button for ending a telephone call on the COMAND system. Wrench button X Press and hold wrench button : for longer than 2 seconds. A call to a Mercedes-Benz Roadside Assistance representative will be initiated.
Call will appear in the multifunction display and the COMAND system is muted. When the connection is established, the message Call Connected appears in the multifunction display. The mbrace system will transmit data generating the vehicle identification number, model, color and location (subject to availability of cellular and GPS signals).
Route Assistance This service is only available as part of the PLUS package. With the Route Assistance service you get professional, reliable guidance from an mbrace Customer Specialist without leaving your vehicle.
When programming a garage door opener, park vehicle outside the garage. Do not run the engine while programming the integrated remote control. Inhalation of exhaust gas is hazardous to your health. All exhaust gas contains carbon monoxide (CO), and inhaling it can cause unconsciousness and possible death.
Rolling code programming To train a garage door opener (or other rolling code devices) with the rolling code feature, follow these instructions after completing the “Programming” portion (steps 1 through 6) of this text. For your convenience and to complete the procedure faster, you might want to have someone assist you.
Reprogramming a single signal transmitter button To program a device using a signal transmitter button previously trained, follow these steps: X Switch on the ignition. X Press and hold the desired signal transmitter button ( ; , = or ? ). Do not release the button.
2. this device must accept any interference received, including interference that may cause undesired operation. Any unauthorized modification to this device could void the user’s authority to operate the equipment. i Canada only: This device complies with RSS-210 of Industry Canada.
318 BA 197 USA, CA Edition A 2011; 1; 27, en-US hereepe Version: 3.0.3.5 2010-03-24T15:31:10+01:00 - Seite 318.
Vehicle equipment ............................ 320 The first 1000 miles (1500 km) ....... 320 At the gas station ............................. 320 Engine compartment ........................ 322 Tires and wheels ............................... 326 Winter driving .
Vehicle equipment i This Operator’s Manual describes all features, standard or optional, potentially available for your vehicle at the time of purchase. Please be aware that your vehicle might not be equipped with all features described in this manual.
! To prevent damage to the catalytic converters, only use premium unleaded gasoline in this vehicle. Any noticeable irregularities in engine operation should be repaired promptly. Otherwise, excessive unburned fuel may reach the catalytic converter, causing it to overheat and potentially start a fire.
R Vehicle lighting ( Y page 400) R Washer system and headlamp cleaning system ( Y page 325) R Brake fluid level ( Y page 325) Engine compartment Hood G Warning! Do not pull the release lever while the vehicle is in motion. Otherwise the hood could be forced open by passing air flow.
Closing G Warning! When closing the hood, use extreme caution not to catch hands or fingers. Be careful that you do not close the hood on anyone. Make sure the hood is securely engaged before driving off. Do not continue driving if the hood can no longer engage after an accident, for example.
The following will result in engine or emission control system damage not covered by the Mercedes-Benz Limited Warranty: R Using engine oils and oil filters of specification other than those expressly required for the Maintenance System. R Changing of oil and oil filter at change intervals longer than those called for by the Maintenance System.
X Using a rag, slowly open cap : approximately 1 / 2 turn counterclockwise to relieve excess pressure. X Continue turning cap : counterclockwise and remove it. The coolant level is correct if the level R for cold coolant: reaches the top of the mark (plastic bridge) in coolant expansion tank ; R for warm coolant: is approximately 0.
The brake fluid level is correct when it is between lower mark (MIN) ; and upper mark (MAX) : of the brake fluid reservoir. Tires and wheels Safety notes Contact an authorized Mercedes-Benz Center for information on tested and recommended rims and tires for summer and winter operation.
sharply reduced at tread depths of less than 1 / 8 in (3 mm). R When replacing individual tires, you should mount new tires on the front wheels first (on vehicles with same-sized wheels all around). Recommended tire inflation pressure G Warning! Follow recommended tire inflation pressures.
weight. The tire inflation pressures listed apply to the tires installed as original equipment. Important notes on tire inflation pressure G Warning! If the tire inflation pressure drops repeatedly, check the tires for punctures from foreign objects and/or whether air is leaking from the valves or from around the rim.
punctured or damaged by road debris, potholes etc. Overinflated tires can R adversely affect handling characteristics R cause uneven tire wear R be more prone to damage from road hazards R adversely affect ride comfort R increase stopping distance Checking tire inflation pressure Safety notes G Warning! Follow recommended tire inflation pressures.
The TPMS only functions on wheels that are equipped with the proper electronic sensors. G Warning! The TPMS does not indicate a warning for wrongly selected inflation pressures.
vehicle’s control system can occur. The tire pressure displayed by the control system apply to sea level. In high-altitude locations, the reading on a tire pressure gauge will be higher than the reading issued by the vehicle’s control system. Do not reduce the tire inflation pressure under such circumstances.
Restarting Advanced TPMS G Warning! It is the driver’s responsibility to set the tire inflation pressure to the recommended cold tire inflation pressure. Underinflated tires affect the ability to steer or brake the vehicle. You might lose control over the vehicle.
Maximum tire inflation pressure G Warning! Never exceed the maximum tire inflation pressure. Follow recommended tire inflation pressures. Do not underinflate tires. Underinflated tires wear excessively and/or unevenly, adversely affect handling and fuel economy, and are more likely to fail from being overheated.
Loading the vehicle Two labels on your vehicle show how much weight it may properly carry. (1) The Tire and Loading Information placard can be found on the driver’s door B-pillar. This placard tells you important information about the number of people that can be in the vehicle and the total weight that can be carried in the vehicle.
The Tire and Loading Information placard showing load limit information : is located on the driver’s door B-pillar ( Y page 334). X Locate the statement “The combined weight of occupants and cargo should never exceed XXX kilograms or XXX lbs.” on the Tire and Loading Information placard.
X Step 3: Subtract the combined weight of the driver and passengers from XXX kilograms or XXX lbs. X Step 4: The resulting figure equals the available amount of cargo and luggage load capacity.
GAWR from the certification label. The certification label can be found on the driver’s door B-pillar, see the “Technical data” section ( Y page 421). Gross Vehicle Weight Rating (GVWR): The total weight of the vehicle, all occupants, all cargo, and the trailer tongue load (if applicable) must never exceed the GVWR.
Tire care and maintenance G Warning! Regularly check the tires for damage. Damaged tires can cause tire inflation pressure loss. As a result, you could lose control of your vehicle. Worn, old tires can cause accidents. If the tire tread is worn to minimum tread depth, or if the tires have sustained damage, replace them.
Storing tires ! Keep unmounted tires in a cool, dry place with as little exposure to light as possible. Protect tires from contact with oil, grease and fuels. Cleaning tires ! Never use a round nozzle to power wash tires. The intense jet of water can result in damage to the tire.
approximately 1 / 6 in (4 mm) on all four wheels for the winter season to ensure normal balanced handling characteristics. On packed snow, they can reduce your stopping distance compared to summer tires. Stopping distance, however, is still considerably greater than when the road is not covered with snow or ice.
Tire labeling Besides tire name (sales designation) and manufacturer name, a number of markings can be found on a tire. Following are some explanations for the markings on your vehicle’s tires: : Un.
Aspect ratio Aspect ratio ; is the dimensional relationship between tire section height and section width and is expressed in percentage. The aspect ratio is arrived at by dividing section height by section width. Tire code Tire code = indicates the tire construction type.
Index Speed rating ZR...(..Y) above 186 mph (300 km/h) ZR above 149 mph (240 km/h) R At the tire manufacturer’s option, any tire with a speed capability above 149 mph (240 km/h) can include a “ZR” in the size designation (for example: 245/40 ZR18).
In addition to the load index, special load identification : may be molded into the tire sidewall following the letter designating the speed symbol B ( Y page 341). R No specification given: absence of any text (like in above example) indicates a standard load (SL) tire.
may vary from data shown in above illustration. This marking tells you about the type of cord and number of plies in the sidewall : and under the tread ; .
Maximum loaded vehicle weight The sum of curb weight, accessory weight, total load limit, and production options weight. Maximum permissible tire inflation pressure This number is the greatest amount of air pressure that should ever be put in the tire.
determined by tire manufacturers using U.S. government testing procedures. The ratings are molded into the sidewall of the tire. Vehicle maximum load on the tire Load on an individual tire that is determined by distributing to each axle its share of the maximum loaded vehicle weight and dividing it by two.
R Only use snow chains that are approved by Mercedes-Benz. Any authorized Mercedes- Benz Center will be glad to advise you on this subject. R Use of snow chains may be prohibited depending on location. Always check local and state laws before installing snow chains.
Fuel consumption is also increased by driving in cold weather, in stop-and-go traffic, on short trips and in mountainous areas. Drinking and driving G Warning! Drinking and driving and/or taking drugs and driving are very dangerous combinations. Even a small amount of alcohol or drugs can affect your reflexes, perceptions and judgment.
advisable to brake the vehicle with considerable force prior to parking. The heat generated serves to dry the brakes. Salt-covered roads G Warning! A layer of salt on the brake discs and the brake linings may cause a delay in the braking effect, resulting in a significantly increased braking distance, which could lead to an accident.
Excessive high-demand braking will cause correspondingly high brake wear. Please be attentive to the brake warning lamp in the instrument cluster and brake condition messages in the multifunction display. Especially for high performance driving, it is important to maintain and have the brake system checked regularly.
and the safety of others, we recommend that you pull over to a safe location and stop before placing or taking a telephone call. If you choose to use the telephone 11 while driving, please use the hands-free device and only use the telephone when road, weather and traffic conditions permit.
Starting approximately 1 month before the next maintenance service is required, one of the following messages will appear in the multifunction display.
Resetting the maintenance service indicator In the event that the maintenance service on your vehicle is not carried out at an authorized Mercedes-Benz Center, you can have the maintenance service indicator reset.
Your vehicle has been treated at the factory with a wax-base rustproofing in the body cavities which will last for the lifetime of the vehicle. Post-production treatment is neither necessary nor recommended by Mercedes- Benz because of the possibility of incompatibility between materials used in the production process and others applied later.
Have paintwork repairs performed at an authorized Mercedes-Benz Center. Have stone chipping repairs as soon as possible. Remove the following immediately if possible. Do not apply strong force. R Soak insect remains with insect remover and rinse them of with water afterwards.
Due to the width of the vehicle, fold in exterior rear view mirrors prior to running the vehicle through an automatic car wash to prevent damage to the mirrors. X When taking the vehicle through an automatic conveyor-type car wash: Make sure the transmission remains in neutral position N .
X Only use clean water and a soft, non- scratching cloth to clean rear view camera lens : . Be careful not to apply wax to rear view camera lens : when waxing the vehicle. If necessary, remove the wax using the Mercedes-Benz approved Car Shampoo with plenty of water.
Therefore, the vehicle’s brake system should always be warmed-up before it is parked after cleaning. Drive your vehicle for several minutes to allow the brakes to dry. When applying Mercedes-Benz approved Tire Care and Mercedes-Benz approved Wheel Care products, take care not to spray them on the brake disks.
Leather upholstery Please note that leather upholstery is a natural product and is therefore subject to a natural aging process. Leather upholstery may also react to certain ambient influences such as high humidity or high temperature by showing wrinkles for example.
Vehicle equipment ............................ 362 Where will I find...? ........................... 362 Vehicle status messages in the multifunction display ....................... 364 What to do if... ................................... 388 Unlocking/locking manually .
Vehicle equipment i This Operator’s Manual describes all features, standard or optional, potentially available for your vehicle at the time of purchase. Please be aware that your vehicle might not be equipped with all features described in this manual.
X To remove jack C from storage well casing E , loosen hook and loop fastener D . X Remove jack C with storage well casing E . F Fuse chart G Wheel wrench H Towing eye bolt Collapsible wheel chock The collapsible wheel chock serves to secure the vehicle, e.
Before placing the jack back into the vehicle tool kit: X Fully collapse the jack. X Fold in the crank handle (storage position). Vehicle status messages in the multifunction display Notes Warning and malfunction messages appear in the multifunction display located in the instrument cluster.
Text messages Safety systems Display messages Possible causes/consequences and M Solutions Front Passenger Airbag Enabled See Operator's Manual The passenger front air bag and the passenger-side .
G Warning! If the 4 5 indicator lamp remains out even after performing the above corrective steps, do not have any children 12 years old and under and other small individuals use the passenger seat until the system has been repaired.
Driving systems Display messages Possible causes/consequences and M Solutions Cruise Control Inoperative The cruise control is malfunctioning. In addition an acoustic warning sounds. X Have the cruise control checked at an authorized Mercedes- Benz Center.
Display messages Possible causes/consequences and M Solutions Only Shift to 'P' when Vehicle is Stationary You have attempted to shift the transmission into park position P although the vehicle was still in motion. X Stop your vehicle as soon as it is safe to do so.
Display messages Possible causes/consequences and M Solutions At least one wheel without appropriate wheel sensors is mounted. The respective tire is indicated by – – instead of the tire inflation pressure in the multifunction display. X Have the Advanced TPMS checked at an authorized Mercedes- Benz Center.
G Warning! Follow recommended tire inflation pressures. Do not underinflate tires. Underinflated tires wear excessively and/or unevenly, adversely affect handling and fuel economy, and are more likely to fail from being overheated. Do not overinflate tires.
Display messages Possible causes/consequences and M Solutions $ (USA only) J (Canada only) ABS and ESC Inoperative See Operator's Manual In addition, the yellow ESC warning lamp ÷ , the yellow ESC OFF warning lamp å , and the yellow ABS indicator lamp ! come on.
Display messages Possible causes/consequences and M Solutions $ (USA only) J (Canada only) EBD, ABS, and ESC Inoperative See Operator's Manual In addition, the yellow ESC warning lamp ÷ , the yellow ESC OFF warning lamp å , and the yellow ABS indicator lamp ! come on and an acoustic warning sounds.
Display messages Possible causes/consequences and M Solutions F (USA only) ! (Canada only) Release Parking Brake In addition, the red indicator lamp for the electronic parking brake flashes, the yellow warning lamp for the electronic parking brake comes on and an acoustic warning sounds.
Display messages Possible causes/consequences and M Solutions F (USA only) ! (Canada only) Parking Brake See Oper. Manual In addition, the yellow warning lamp for the electronic parking brake comes on. The red indicator lamp for the electronic parking brake may also come on.
Display messages Possible causes/consequences and M Solutions F (USA only) ! (Canada only) Parking Brake See Oper. Manual In addition, the red indicator lamp for the electronic parking brake flashes and the yellow warning lamp for the electronic parking brake comes on.
Display messages Possible causes/consequences and M Solutions F (USA only) ! (Canada only) Parking Brake Inoperative When you engage or release the electronic parking brake, the red indicator lamp for the electronic parking brake flashes and goes out after approx.
Safety systems Display messages Possible causes/consequences and M Solutions ÷ ESC Inoperative See Operator's Manual In addition, the yellow ESC warning lamp ÷ and the yellow ESC OFF warning lamp å come on.
Display messages Possible causes/consequences and M Solutions 6 SRS Malfunction Service Required There is a malfunction in the Supplemental Restraint System (SRS). The air bags or Emergency Tensioning Devices (ETDs) could deploy unexpectedly or fail to activate in an accident.
Display messages Possible causes/consequences and M Solutions Ñ Rear Spoiler Control System Inoperative The Trunk Wing does not retract to its home position completely and will extend again if possible. If movement of the Trunk Wing is blocked, for example by ice: X Make sure to eliminate the cause for the blockage.
Display messages Possible causes/consequences and M Solutions + Obtain a New Key The SmartKey is malfunctioning. X Contact an authorized Mercedes-Benz Center. + Close Doors to Lock Vehicle You tried to lock the vehicle but not all doors were closed. X Close doors and lock the vehicle again.
Engine Display messages Possible causes/consequences and M Solutions + Check Coolant Level See Operator's Manual The coolant level is too low. X Add coolant ( Y page 324). X If you have to add coolant frequently, have the cooling system checked at an authorized Mercedes-Benz Center.
Display messages Possible causes/consequences and M Solutions ? Coolant Level Low Stop Vehicle Turn Engine Off The poly-V-belt could be broken. X Stop the vehicle immediately as soon as it is safe to do so. X Turn off the engine immediately. X Check the poly-V-belt.
Display messages Possible causes/consequences and M Solutions # The battery is no longer charging. Possible causes: R alternator malfunctioning R broken poly-V-belt R a malfunction in the electronic system X Stop immediately in a safe location or as soon as it is safe to do so and check the poly-V-belt.
Display messages Possible causes/consequences and M Solutions 8 Gas Cap Loose A loss of pressure has been detected in the fuel system. The fuel cap may not be closed properly or the fuel system may be leaking. X Check the fuel cap ( Y page 321). X If it is not closed properly: Close the fuel cap.
Display messages Possible causes/consequences and M Solutions b Check Front Left Sidemarker Lamp or Check Front Right Sidemarker Lamp The front left side or right side marker lamp is malfunctioning. X Contact an authorized Mercedes-Benz Center as soon as possible.
Display messages Possible causes/consequences and M Solutions b Auto Lamp Function Inoperative The light sensor is malfunctioning. The headlamps come on automatically. X Contact an authorized Mercedes-Benz Center as soon as possible. To switch off the headlamps (U.
Display messages Possible causes/consequences and M Solutions b Check Front Left Turn Signal or Check Front Right Turn Signal The left or right front turn signal lamp is malfunctioning. X Contact an authorized Mercedes-Benz Center as soon as possible.
AMG SPEEDSHIFT DCT 7-SPEED Transmission Display messages Possible causes/consequences and M Solutions j Parking Lock Malfunct. Apply Parking Brake The transmission cannot be shifted to park position P anymore. X Make sure the electronic parking brake is engaged.
Brake Problem Possible causes/consequences and M Solutions ! The yellow ABS indicator lamp comes on while the engine is running. The brake system is still functioning normally but due to a malfunction, the ABS, the BAS, the ESC, and the hill-start assist system are unavailable.
Problem Possible causes/consequences and M Solutions F (USA only) ! (Canada only) The red indicator lamp for the electronic parking brake flashes and/or the yellow warning lamp for the electronic parking brake is on. The electronic parking brake is malfunctioning or defective.
Safety systems Problem Possible causes/consequences and M Solutions 7 The red seat belt telltale comes on for a maximum of 6 seconds after starting the engine. The seat belt telltale reminds you and your passenger to fasten your seat belts before driving off.
i After 60 seconds with an unfastened seat belt the warning chime stops sounding and the seat belt telltale illuminates continuously. The seat belt telltale will only go out if both, the driver and passenger’s seat belt are fastened, or the vehicle is standing still and a door is opened.
Problem Possible causes/consequences and M Solutions ì The yellow ESC SPORT warning lamp comes on while the engine is running. ESC SPORT is activated. Risk of accident! When ESC SPORT is activated it will only stabilize the vehicle to a limited extent if the system recognizes that the vehicle starts to skid or that a wheel is spinning.
Vehicle Problem Possible causes/consequences and M Solutions 8 The yellow fuel tank reserve warning lamp comes on when the engine is running. The fuel level has gone below the reserve mark.
G Warning! Driving when your engine is overheated can cause some fluids which may have leaked into the engine compartment to catch fire. You could be seriously burned. Steam from an overheated engine can cause serious burns which can occur just by opening the engine hood.
G Warning! Each tire, including the spare (if provided), should be checked at least once a month when cold and inflated to the inflation pressure recommended by the vehicle manufacturer on the Tire and Loading Information placard on the driver’s door B-pillar or the tire inflation pressure label on the inside of the fuel filler flap.
G Warning! If the 4 5 indicator lamp illuminates and remains illuminated with the weight of a typical adult or someone larger than a small individual on the passenger seat, do not have any passenger use the passenger seat until the system has been repaired.
Unlocking/locking the vehicle If you cannot lock or unlock the vehicle centrally with the SmartKey, use the mechanical key. The anti-theft alarm system will be triggered when you R unlock the driver’s door with the mechanical key and R open the driver’s door To cancel the alarm, see “Canceling the alarm” ( Y page 67).
X Remove the SmartKey from the trunk lid lock. X Check whether the trunk is locked. X Unlocking: Insert the mechanical key into trunk lid lock : . X Turn the mechanical key counterclockwise as far as it will go. X Remove the SmartKey from the trunk lid lock.
Replacing bulbs Safety notes Safe vehicle operation depends on proper exterior lighting and signaling to a large degree. Correct headlamp adjustment is extremely important. Have headlamps checked and readjusted at regular intervals and when a bulb has been replaced.
G Warning! Wiper blades are components that are subject to wear and tear. Replace the wiper blades twice a year, preferably in the spring and fall. Otherwise the windshield will not be wiped properly. As a result, you may not be able to observe surrounding traffic conditions and could cause an accident.
Flat tire Notes Your vehicle is equipped with a TIREFIT kit ( Y page 362). Preparing the vehicle X Whenever possible, park the vehicle in a safe distance from moving traffic on a hard, flat surface. X Turn on the hazard warning flasher. X Turn the steering wheel so that the front wheels are in a straight-ahead position.
G Warning! Keep TIREFIT out of reach of children. If swallowed, rinse mouth immediately with plenty of water and drink plenty of water. Do not induce vomiting! Consult a physician immediately. i If sealant has leaked out, let it dry. You can then peel it off.
X Press I on electric air pump switch ; . The electric air pump is switched on and inflates the tire. i First, the sealing is pumped into the tire. The pressure may briefly rise to up to 500 kPA (5 bar, 73 psi). This is normal and not an indication of a malfunction.
G Warning! Do not exceed a vehicle speed of 50 mph (80 km/h). A TIREFIT repair is not designed to operate at higher speeds. The sticker must be attached on the instrument cluster where it will be easily seen by the driver. Vehicle handling characteristics of a TIREFIT repaired tire may change.
R collapsible wheel chock R jack R wheel wrench R alignment bolt For information on where to find the respective items, see “Where will I find ...?” ( Y page 362). X Prevent the vehicle from rolling away by blocking wheels with wheel chocks or other sizeable objects.
Removing the wheel G Warning! When jacking up the vehicle, only use the jack which has been specifically approved by Mercedes-Benz for your vehicle. The jack is designed exclusively for jacking up the vehicle at the jack take-up brackets built into both sides of the vehicle.
X Place jack = on firm ground. X Position jack = under take-up bracket ; so that it is always vertical as seen from the side, even if the vehicle is parked on an incline. X Turn crank ? clockwise until jack = is fully seated in take-up bracket ; and the jack base evenly meets the ground.
: Wheel bolt X Clean contact surfaces of wheel and wheel hub. ! To avoid paint damage, place wheel flat against hub and hold it there while installing first wheel bolt. ! The rim could strike the ceramic composite brake disk when removing and attaching the wheel.
Battery Safety notes A battery should always be sufficiently charged in order to achieve its rated service life. Refer to Maintenance Booklet for battery maintenance intervals. If you use your vehicle mostly for short- distance trips, you will need to have the battery charge checked more frequently.
Do not rub the battery with rags or cloths. The battery could explode if touched due to electrostatic charge or due to spark formation. ! The battery is a V alve- R egulated L ead A cid (VRLA) battery, also referred to as “fleece” battery. Such batteries do not require topping-up of the electrolyte level.
Charging the battery G Warning! Never charge a battery while still installed in the vehicle unless the accessory battery charge unit approved by Mercedes-Benz is being used. Gases may escape during charging and could cause an explosion that may result in personal injury, paint damage or corrosion.
Jump starting G Warning! Failure to follow these directions will cause damage to the electronic components, and can lead to a battery explosion and severe injury or death. Never lean over batteries while connecting or jump starting. You might get injured.
X Make sure the two vehicles do not touch. X Switch off all electrical consumers. X Engage the electronic parking brake. X Make sure the transmission is in park position P . X Open the hood ( Y page 322). Position B represents the charged battery of another vehicle or an equivalent starter pack.
Towing the vehicle Safety notes Mercedes-Benz recommends that the vehicle be transported with all wheels off the ground using flatbed or appropriate wheel lift/dolly equipment. This method is preferable to other types of towing. ! To prevent damage during transport, do not tie down vehicle by its chassis or suspension parts.
Fixing towing eye bolt X Screw towing eye bolt ; clockwise into threaded hole to its stop. X Insert wheel wrench into towing eye and tighten towing eye bolt ; by turning it clockwise. Removing towing eye bolt X Loosen towing eye bolt ; by turning it counterclockwise.
Leave the engine running under all circumstances. Removing the SmartKey from the starter switch or opening a door with the ignition switched off will automatically shift the into park position P . X Start the engine ( Y page 259). X With the vehicle at a standstill, depress the brake pedal and keep it pressed.
X KEYLESS-GO: Open the driver’s door (this puts the starter switch in position 0 , same as with the SmartKey removed from the starter switch). The driver’s door then can be closed again. X Remove the SmartKey from the starter switch. Fuse box in passenger footwell X Opening: Remove the carpet from the footrest.
Vehicle equipment ............................ 420 Parts service ..................................... 420 Warranty coverage ........................... 420 Identification labels .......................... 420 Vehicle specification ...................
Vehicle equipment i This Operator’s Manual describes all features, standard or optional, potentially available for your vehicle at the time of purchase. Please be aware that your vehicle might not be equipped with all features described in this manual.
The Vehicle Identification Number (VIN) can be found R on certification label : on the driver’s door B-pillar R embossed underneath the carpet in the passenger footwell ( Y page 421) R on the lower edge of the windshield ( Y page 421) Example certification label (U.
Benz Center for the corresponding data of all special bodies and special equipment. Engine SLS AMG (197) Engine, type 159 Mode of operation 4-stroke engine, gasoline injection No. of cylinders 8 Bore 4.02 in (102.20 mm) Stroke 3.72 in (94.60 mm) Total piston displacement 378.
! Using tires other than those approved by Mercedes-Benz can have detrimental effects, such as R poor handling characteristics R increased noise R increased fuel consumption Moreover, tires and rims n.
Tires Summer tires Front axle Summer tires 265/35 ZR19 (98Y) XL (Extra Load) Rims (light alloy) Wheel offset 9.5 J x 19 H2 2.36 in (60 mm) or 2.32 in (59 mm) Rear axle Summer tires 14 295/30 ZR20 (101Y) XL (Extra Load) Rims (light alloy) Wheel offset 11 J x 20 H2 2.
Fuels, coolants, lubricants, etc. Capacities Vehicle components and their respective lubricants must match. Therefore only use products tested and approved by Mercedes-Benz. For information on tested and approved products, contact an authorized Mercedes-Benz Center or visit http://www.
Approved engine oils Engine oils are specifically tested for their suitability in our engines and durability for our service intervals. Therefore, only use approved engine oils and oil filters required for vehicles with the Maintenance System.
Only brake fluid approved by Mercedes-Benz is recommended. Any authorized Mercedes- Benz Center will provide you with additional information. Premium unleaded gasoline G Warning! Gasoline is highly flammable and poisonous. It burns violently and can cause serious personal injury.
use of Mercedes-Benz approved additives is recommended. Contact an authorized Mercedes-Benz Center or visit http://www.MBUSA.com (USA only) for a listing of approved products. Follow directions on the product label. Do not blend other fuel additives with fuel.
such anticorrosion/antifreeze coolant will result in a significantly shortened service life. Therefore, the following product is strongly recommended for use in your vehicle: MB 325.
430 BA 197 USA, CA Edition A 2011; 1; 27, en-US hereepe Version: 3.0.3.5 2010-03-24T15:31:10+01:00 - Seite 430.
431 BA 197 USA, CA Edition A 2011; 1; 27, en-US hereepe Version: 3.0.3.5 2010-03-24T15:31:10+01:00 - Seite 431.
432 BA 197 USA, CA Edition A 2011; 1; 27, en-US hereepe Version: 3.0.3.5 2010-03-24T15:31:10+01:00 - Seite 432.
Service and Literature Your authorized Mercedes-Benz Center has trained technicians and Genuine Mercedes- Benz Parts to service your vehicle properly. For expert advice and quality service, contact an authorized Mercedes-Benz Center.
Order no. 6515 4854 13 Part no. 197 584 03 81 Edition Edition A 2011 É1975840381qËÍ 1975840381 BA 197 USA, CA Edition A 2011; 1; 27, en-US hereepe Version: 3.
Ein wichtiger Punkt beim Kauf des Geräts Mercedes-Benz 2011 SLS AMG (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Mercedes-Benz 2011 SLS AMG noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Mercedes-Benz 2011 SLS AMG - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Mercedes-Benz 2011 SLS AMG reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Mercedes-Benz 2011 SLS AMG erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Mercedes-Benz 2011 SLS AMG besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Mercedes-Benz 2011 SLS AMG verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Mercedes-Benz 2011 SLS AMG. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Mercedes-Benz 2011 SLS AMG gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
