Benutzeranleitung / Produktwartung 2011 SL65 AMG des Produzenten Mercedes-Benz
Zur Seite of 316
SL Operator’s Manual 230_AKB; 6; 22, en-US d2ureepe, Version: 2.11.8.1 2009-07-28T18:49:58+02:00 - Seite 1.
Symbols Trademarks: R Bluetooth ® is a registered trademark of Bluetooth SIG Inc. R ESP ® is a registered trademark of Daimler. R HomeLink ® is a registered trademark of Prince, a Johnson Controls Company. R SIRIUS and related marks are trademarks of SIRIUS XM Radio Inc.
Our company and staff congratulate you on the purchase of your new Mercedes-Benz. Your selection of our product is a demonstration of your trust in our company name. Furthermore, it exemplifies your desire to own an automobile that will be as easy as possible to operate and will provide years of service.
230_AKB; 6; 22, en-US d2ureepe, Version: 2.11.8.1 2009-07-28T18:49:58+02:00 - Seite 2.
Index ....................................................... 4 Introduction ......................................... 19 At a glance ........................................... 25 Safety and security ............................. 37 Controls in detail .
A ABC (Active Body Control) ................ 142 Messages in the multifunction display ........................................... 231 ABS (Antilock Brake System) ............. 55 Indicator lamp ................................ 255 Messages in the multifunction display .
Program mode selector switch (automatic shift program) ................................ 106, 107 Program mode selector switch (manual shift program) .................. 109 Shifting procedure ......................... 104 Steering wheel gearshift control .
Clock ..................................................... 28 Cockpit ................................................. 28 Cold tire inflation pressure .............. 205 Collapsible tire (spare wheel) .......... 303 COMAND system see separate COMAND system operating instructions Combination switch .
Vehicle status message memory ... 120 Vehicle system settings ................. 121 Distronic ............................................ 133 Cleaning system sensor cover ....... 218 Control system .............................. 120 Distance warning function .
Number .......................................... 295 Starting ............................................ 98 Turning off ..................................... 102 Engine (Technical data) see Vehicle specification Engine coolant see Coolant Engine oil Adding .
Limiting .......................................... 108 Shifting into optimal ...................... 109 Gear selector lever ............................ 103 Cleaning ......................................... 220 Gearshift pattern ....................
Intermittent wiping ............................. 95 Rain sensor ...................................... 95 J Jack ..................................................... 225 Jump starting ..................................... 285 K Key, Mechanical Loss of .
License plate lamps Messages in the multifunction display ........................................... 251 Replacing bulbs ............................. 272 Light alloy wheels, cleaning ............. 220 Lighter see Cigaret te ligh ter Lighting .......
ESP ® .............................................. 228 Fog lamps .............................. 250, 252 Gas cap .......................................... 249 Gear selector lever ........................ 234 High-beam lamps .......................
Parking position Exterior rear view mirrors ................ 87 Transmission position .................... 104 Parktronic system Cleaning system sensors ............... 218 Malfunction .................................... 147 Minimum distance ........
Reset button ................................ 30, 112 Restraint systems see O ccupant safety Retractable hardtop .......................... 155 Locking .......................................... 157 Luggage cover ............................... 158 Messages in the multifunction display .
Speed settings Cruise control ................................ 131 Distronic ........................................ 137 Resume function ................... 132, 138 SRS Indicator lamp ............................ 31, 32 SRS (Supplemental Restraint System) Indicator lamp .
Tire Identification Number see TIN Tire inflation pressure Checking ........................................ 189 Important notes on ........................ 188 Label on the inside of fuel filler flap ................................................ 188 Placard on driver’s door B-pillar .
Messages in the multifunction display ........................................... 253 Replacing bulbs ............................. 272 U Uniform Tire Quality Grading Standards .................................. 199, 207 Units Selecting digital speedometer display mode .
Windshield Cleaning wiper blades .................... 219 Defogging ...................................... 153 Washer fluid ................................... 309 Wipers ............................................. 95 Windshield wipers Replacing wiper blades .
Product Information Please observe the following in your own best interest: We recommend using Genuine Mercedes- Benz Parts as well as conversion parts and accessories explicitly approved by us for your vehicle model. We have tested these parts to determine their reliability, safety and special suitability for Mercedes-Benz vehicles.
Rhode Island, and Vermont Emission Control System Warranty R State Warranty Enforcement Laws (Lemon Laws) Important notice for California retail buyers and lessees of Mercedes-Benz automobiles Under C.
contacting you in a timely manner should the need arise. If you sell your Mercedes, please leave all literature with the vehicle to make it available to the next operator.
Proper use of the vehicle Proper use of the vehicle requires that you are familiar with the following information and rules: R the safety precautions in this manual R the “Technical data” section .
This information helps, for example, to diagnose vehicle systems after a collision and to continuously improve vehicle safety. Daimler may access the information and share it with others R for safety .
24 230_AKB; 6; 22, en-US d2ureepe, Version: 2.11.8.1 2009-07-28T18:49:58+02:00 - Seite 24.
Exterior view ....................................... 26 Multifunction steering wheel ............. 27 Cockpit ................................................. 28 Instrument cluster .............................. 30 Center console ...................
Exterior view i This Operator’s Manual describes all features, standard or optional, potentially available for your vehicle at the time of purchase. Please be aware that your vehicle might not be equipped with all features described in this manual.
Multifunction steering wheel Function Page : Left multifunction display 114 ; Right multifunction display 114 = Press button ~ : to end a call 129 to reject an incoming call 129 Press button 6 : to an.
Cockpit Function Page : Exterior lamp switch 89 ; Headlamp cleaning button 93 = Cruise control lever: Cruise control 131 Distronic 136 ? Left steering wheel gearshift control 108 A Instrument cluster .
Function Page R Parking brake release 102 S Door control panel 35 Cockpit 29 At a glance 230_AKB; 6; 22, en-US d2ureepe, Version: 2.11.8.1 2009-07-28T18:49:58+02:00 - Seite 29 Z.
Instrument cluster Function Page : Coolant temperature gauge 112 ? Coolant temperature warning lamp 263 ; Speedometer with: # Left turn signal indicator lamp J Brake warning lamp, Canada only 255 ÷ A.
Version 1 (depending on vehicle production date) Function Page A Tachometer with: K High-beam headlamp indicator lamp 92 ; Engine malfunction indicator lamp 263 7 Seat belt telltale 48, 256 I Roll bar.
Version 2 (depending on vehicle production date) Function Page A Tachometer with: K High-beam headlamp indicator lamp 92 ; Engine malfunction indicator lamp, Canada only 263 7 Seat belt telltale 48, 2.
Center console Upper part Function Page : Central locking switch 73 Alarm system indicator lamp 63 ; Hazard warning flasher switch 92 = Central unlocking switch 73 ? Passenger front air bag off indica.
Lower part Function Page : Gear selector lever 103 ; Parktronic system deactivation switch 147 = Exterior rear view mirror adjustment 86 ? ABC suspension tuning button 143 A Tow-away alarm switch 64 B.
Overhead control panel Function Page : Left reading lamp switch 94 ; Temperature sensor for automatic climate control = Right reading lamp switch 94 ? Automatic interior lighting control 94 A Interior.
36 230_AKB; 6; 22, en-US d2ureepe, Version: 2.11.8.1 2009-07-28T18:49:58+02:00 - Seite 36.
Vehicle equipment .............................. 38 Occupant safety .................................. 38 Panic alarm .......................................... 54 Driving safety systems ....................... 54 Anti-theft systems ..................
Vehicle equipment i This Operator’s Manual describes all features, standard or optional, potentially available for your vehicle at the time of purchase. Please be aware that your vehicle might not be equipped with all features described in this manual.
could result in serious or fatal injury. The SRS might also deploy unexpectedly and unnecessarily which could also result in injury as well. In addition, improper work on the SRS creates a risk of rendering the SRS inoperative or causing unintended air bag deployment.
thorax air bag be deployed. Always sit as upright as possible, wear the seat belt properly and use an appropriately sized infant restraint, toddler restraint, or booster seat recommended for the size and weight of the child. Failure to follow these instructions can result in severe injuries to you or other occupants.
installed or supplied by an authorized Mercedes-Benz Center. R Air bags and pyrotechnic Emergency Tensioning Devices (ETDs) contain perchlorate material, which may require special handling and regard for the environment. Check with your local government’s disposal guidelines.
Driver and passenger front air bag and driver’s side knee bag are deployed R in the event of certain frontal impacts R if the system determines that air bag deployment can offer additional protectio.
passenger seat is occupied and the impact exceeds a preset deployment threshold. Head-thorax air bags : are not deployed in side impacts which do not exceed the system’s deployment threshold. Occupant Classification System The Occupant Classification System (OCS) activates or deactivates the passenger front air bag automatically.
If the 45 indicator lamp is illuminated, the passenger front air bag is deactivated and will not be deployed. If the 45 indicator lamp is not illuminated, the passenger front air bag is activated and .
child restraint – both of which are instances where the system suppresses deployment of the passenger front air bag even though the impact met the criteria and was of sufficient severity to deploy t.
with the passenger seat cushion and backrest. If necessary, adjust the tilt of the passenger seat backrest. An incorrectly mounted child seat could cause injuries to the child in case of an accident, instead of increasing protection for the child. Follow the manufacturer’s instructions for installation of child seats.
Have all work carried out only by qualified technicians. Contact an authorized Mercedes-Benz Center. Proper use of seat belts G Warning! USE SEAT BELTS PROPERLY R Seat belts can only protect when used properly. Never wear seat belts in any other way than as described in this section, as that could result in serious injuries in case of an accident.
Never attempt to make modifications to seat belts. This could impair the effectiveness of the seat belts. Fastening the seat belts G Warning! Children 12 years old and under must be seated and properly secured in an appropriately sized infant restraint, toddler restraint, or booster seat recommended for the size and weight of the child.
If after these 6 seconds the driver’s or the passenger’s seat belt (with the passenger seat occupied) is not fastened with both doors closed, R the seat belt telltale 7 remains illuminated for as long as either the driver’s or passenger’s seat belt is not fastened.
Correct driver seat adjustment G Warning! In order to avoid possible loss of vehicle control the following must be done before the vehicle is put into motion: R seat adjustment R head restraint adjustment R steering wheel adjustment R rear view mirror adjustment R fastening of seat belts Steering wheel G Observe Safety notes, see page 84.
Roll bar G Warning! This vehicle is a two occupant vehicle. The rear storage area is not equipped to properly seat or restrain occupants and therefore is not permitted for use by any persons. Make sure that the roll bar’s path of motion is clear and no persons are injured by the moving roll bar.
G Warning! When leaving the vehicle, always remove the SmartKey from the starter switch. Always take the SmartKey with you and lock the vehicle. Do not leave children unattended in the vehicle, even if they are secured in a child restraint system, or with access to an unlocked vehicle.
A statement by the child restraint manufacturer of compliance with these standards can be found on the instruction label on the restraint and in the instruction manual provided with the restraint.
they reach a height where a lap/shoulder belt fits properly without a booster. When the child restraint is not in use, remove it from the vehicle or secure it with the seat belt to prevent the child restraint from becoming a projectile in the event of an accident.
Safety notes G Warning! The following factors increase the risk of accidents: R Excessive speed, especially in turns R Wet and slippery road surfaces R Following another vehicle too closely The driving safety systems described in this section cannot reduce these risks or prevent the natural laws of physics from acting on the vehicle.
If the ABS malfunctions, the wheels may lock during hard braking, reducing steering capability and extending the braking distance. BAS G Observe Safety notes, see page 55.
as specified in the “Technical data” section of this Operator’s Manual. i The Distronic system and cruise control switch off automatically when the ESP ® engages. Electronic Traction System (ETS) G Observe Safety notes, see page 55. The ETS (Electronic Traction System) is a component of the ESP ® .
warning lamp å in the instrument cluster comes on. The ESP ® is switched off. X Switching on: Press ESP ® switch : until the ESP ® OFF warning lamp å in the instrument cluster goes out. You are now again in normal driving mode with the ESP ® switched on.
You could lose control of your vehicle and cause an accident. Please be aware of these limits when you switch on the SPORT handling mode. Do not switch on the SPORT handling mode when a spare wheel is mounted. To improve the vehicle’s traction, switch on the SPORT handling mode.
Version 2 X Switching on: With the engine running, press ESP ® switch : briefly. The ABS/ESP ® warning lamp d in the instrument cluster comes on. The message ESP-SPORT appears in the multifunction display. X Switching off: With the engine running, press ESP ® SPORT switch : briefly.
instrument cluster does not flash. The ESP ® will then not stabilize the vehicle. Depending on vehicle production date, the symbol on the ESP ® switch may differ. Version 1 X Switching off: With the engine running, press ESP ® switch : until the ESP ® OFF warning lamp å in the instrument cluster comes on.
Electro-hydraulic brake system The electro-hydraulic brake system combines a hydraulic brake circuit with electronically controlled brake servo assistance.
out by qualified technicians only. Contact an authorized Mercedes-Benz Center for further information. The electro-hydraulic brake system must be deactivated prior to working on the system. High pressure is intermittently built up in the system as part of its automatic self-test.
R a door is opened from the inside R the trunk is opened with the emergency release button To cancel the alarm after it has been triggered, see “Canceling the alarm” ( Y page 65). i If the alarm stays on for more than 30 seconds, the Tele Aid system initiates a call to the Customer Assistance Center automatically.
surface subject to movement, such as a ferry or auto train. X Remove the SmartKey from the starter switch. X Press tow-away alarm switch : . Indicator lamp ; comes on briefly. X Exit and lock the vehicle. The tow-away alarm remains disabled until you lock the vehicle again.
66 230_AKB; 6; 22, en-US d2ureepe, Version: 2.11.8.1 2009-07-28T18:49:58+02:00 - Seite 66.
Vehicle equipment .............................. 68 Locking and unlocking ....................... 68 Starter switch positions ..................... 78 Seats .................................................... 80 Multifunction steering wheel .........
Vehicle equipment i This Operator’s Manual describes all features, standard or optional, potentially available for your vehicle at the time of purchase. Please be aware that your vehicle might not be equipped with all features described in this manual.
you cannot shut a door, do not force it or you could damage the door or the window. Fix whatever is affecting the window before trying to shut the door. i USA only: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1.
you cannot shut a door, do not force it or you could damage the door or the window. Fix whatever is affecting the window before trying to shut the door. i USA only: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1.
R The vehicle could be inadvertently unlocked if the SmartKey is within 3 ft (1 m) of the vehicle and - an outside door handle is splashed with water or - you attempt to clean an outside door handle R Remember that the engine can be started by anyone with a SmartKey that is left inside the vehicle.
& or % will lock or unlock the vehicle accordingly. Loss of the SmartKey If you lose your SmartKey or mechanical key, you should do the following: X Have the SmartKey deactivated by an authorized Mercedes-Benz Center. X Report the loss of the SmartKey or the mechanical key to your car insurance company immediately.
Automatic central locking You can switch the automatic central locking on or off using the control system ( Y page 126). The doors and the trunk lock automatically when the vehicle is set into motion. You can open a locked door from the inside. Open door only when conditions are safe to do so.
Remember to re-secure the luggage cover after loading/unloading the trunk. Otherwise you will not be able to lower the retractable hardtop. Opening the trunk from the outside Vehicles without trunk opening/closing system X Press button F on the SmartKey.
Closing the trunk G Warning! Make sure the trunk is closed when the engine is running and while driving. Among other dangers, deadly carbon monoxide (CO) gases may enter vehicle interior resulting in unconsciousness and death.
X Press and hold remote trunk opening/ closing switch : until the trunk is closed. Indicator lamp ; in the switch goes out when the trunk is closed. X Interrupting the closing procedure: Release remote trunk opening/closing switch : .
X Make sure you have the SmartKey with KEYLESS-GO with you. X Press KEYLESS-GO locking/closing switch : briefly. With all doors closed: R The locking knobs in the doors move down. R The trunk lid starts to close automatically. R All turn signal lamps flash three times once the trunk has closed completely.
Power closing assist for trunk lid It is not necessary to slam the trunk lid closed. An electrical power-assisted mechanism draws the trunk lid closed quietly and automatically once the trunk lid has been latched. When the electrical power-assisted mechanism has stopped, the trunk can be reopened.
or X Get a jump start ( Y page 285). KEYLESS-GO G Observe Safety notes, see page 51. Vehicles equipped with the KEYLESS-GO feature are supplied with a SmartKey with integrated KEYLESS-GO function.
Seats Safety notes G Warning! In order to avoid possible loss of vehicle control the following must be done before the vehicle is put into motion: R seat adjustment R head restraint adjustment R steering wheel adjustment R rear view mirror adjustment R fastening of seat belts G Warning! Do not adjust the driver’s seat while driving.
Seat adjustment ! When moving the seats, make sure there are no items in the footwell or behind the seats. Otherwise, you could damage the seats and/or the items. Power seats i The memory function ( Y page 88) lets you store the settings for the seat position together with the settings for the steering wheel and the exterior rear view mirrors.
X Switch on the ignition. X Set the lumbar support with thumbwheel : between 0 and 5. Multicontour seat The multicontour seat backrest has inflatable air cushions built into the seat backrest to provide additional lumbar and side support.
X Press seat ventilation switch : repeatedly until the desired ventilation level is set. X Switching off: Press seat ventilation switch : repeatedly until all indicator lamps go out.
X Switch on the ignition. X Switching on seat heating: Press switch : . Both red indicator lamps in switch : come on. X Switching off seat heating: Press switch : repeatedly until all red indicator lamps go out.
Steering wheel adjustment X Adjusting steering wheel in or out: Move stalk in direction of arrows : . X Adjusting steering wheel up or down: Move stalk in direction of arrows ; . i The memory function ( Y page 88) lets you store the settings for the steering wheel together with the settings for the seat position and the exterior rear view mirrors.
Crash-responsive exit aid When you open the driver’s door after an accident has occurred, the steering column moves up. The position of the SmartKey in the starter switch is insignificant. This function facilitates exiting as well as rescue of vehicle occupants.
G Warning! The auto dimming function does not react if incoming light is not aimed directly at sensors in the interior rear view mirror. The interior rear view mirror and the exterior rear view mirror on the driver’s side do not react, for example, if the wind screen is installed.
Power-folding exterior rear view mirrors This feature is only available in Canada vehicles. ! Before you drive the vehicle through an automatic car wash, fold in the exterior rear view mirrors. Otherwise they may get damaged. Folding in and out automatically The function must be activated in the Convenience submenu ( Y page 127).
Storing positions into memory X Adjust the seats. X On the driver’s side, also adjust the steering wheel and exterior rear view mirrors to the desired positions. X Press memory button M once and within 3 seconds press memory position button 1 , 2 or 3 .
SmartKey from the starter switch and open the driver’s door, an acoustic signal sounds. In addition the message Lights Are Still On appears in the multifunction display. Switch off the parking lamps or the rear fog lamp manually. ! Failure to switch off the parking lamps when leaving the vehicle may result in a discharged battery.
X Activate the daytime running lamp mode using the control system, see “Switching daytime running lamp mode on or off (USA only)” ( Y page 124). X Turn the exterior lamp switch to position $ or à . When the engine is running, the low-beam headlamps come on.
Locator lighting and night security illumination Locator lighting and night security illumination are described in the “Control system” section, see “Switching locator lighting on or off” ( Y page 125) and “Switching night security illumination (Headlamps delayed shut-off feature) on or off” ( Y page 125).
X Switching on: Press hazard warning flasher switch : . All turn signal lamps are flashing. i With the hazard warning flasher activated and the combination switch set for either left or right turn, only the respective left or right turn signals will operate when the ignition is switched on.
then again in the other direction shortly thereafter. The corner-illuminating lamp remains lit for a short time only. It then goes out automatically. Switching off X Switch off the left or right turn signal. or X Steer straight ahead. The corner-illuminating lamp goes out.
Wipers Notes ! Do not operate the wipers when the windshield is dry. Dust that accumulates on a windshield might scratch the glass and/ or damage the wiper blades when wiping occurs on a dry windshield. If it is necessary to operate the wipers in dry weather conditions, always operate the wipers with washer fluid.
Wiping with washer fluid X Press the combination switch in direction of arrow A past the resistance point. The windshield wipers operate with washer fluid. i To prevent smears on the windshield or noisy/chattering wiper blades, wipe with washer fluid every now and then even when it is raining.
holding button & on the SmartKey or by pressing and holding the lock button (vehicles with KEYLESS-GO) on an outside door handle, the automatic reversal function will not operate. i You can also open or close the windows using the SmartKey, see “Summer opening feature” ( Y page 156) and “Convenience closing feature” ( Y page 156).
X Closing: Close the door window. X Pull and hold switch : or ; . The corresponding rear side window moves upward until you release the switch. Closing with KEYLESS-GO When locking the vehicle, you can simultaneously close the windows. X Press and hold the lock button on an outside door handle ( Y page 71) until the windows are completely closed.
Automatic transmission Gearshift pattern for automatic transmission j Park position with gear selector lever lock k Reverse gear i Neutral position h Drive position For more information, see “Automatic transmission” ( Y page 103). X Make sure the automatic transmission is in park position P .
switch to position 0 and repeat the starting procedure. X If you are starting the engine with KEYLESS- GO: Close any doors that may be open to allow for better detection of the SmartKey. or X Start the engine with the SmartKey as radio signals from another source may be interfering with the KEYLESS-GO function.
quickly forward or in reverse. You could lose control of the vehicle and hit someone or something. Only shift into gear when the engine is idling normally and when your right foot is firmly on the brake pedal. ! Only shift the automatic transmission into reverse gear R or park position P when the vehicle is stopped.
Vehicle movement may result in serious personal injury or damage to the vehicle or vehicle drivetrain. Therefore, always do the following before turning off the engine and leaving the vehicle: R Keep right foot on the brake pedal. R Engage the parking brake.
X Remove the SmartKey from the starter switch. The SmartKey can only be removed from the starter switch with the automatic transmission in park position P . With KEYLESS-GO X Press the KEYLESS-GO start/stop button. With the driver’s door closed, the starter switch is now in position 1 .
vehicle is stopped. Otherwise the automatic transmission could be damaged. i Shifting the automatic transmission out of park position P is only possible with the brake pedal depressed. Only depressing the brake pedal releases the gear selector lever lock.
Effect B Park position Shift the automatic transmission into park position P only when the vehicle is stopped. The park position is not intended to serve as a brake when the vehicle is parked. Rather, the driver should always engage the parking brake in addition to shifting the automatic transmission into park position P to secure the vehicle.
Working on the vehicle G Warning! When working on the vehicle, engage the parking brake and shift the automatic transmission into park position P . Otherwise the vehicle could roll away which could result in an accident and/or serious personal injury.
Program mode selector dial on SL 63 AMG C Comfort For standard driving S Sport For sporty driving S+ Sport Plus For sporty driving with shorter shift times M Manual For manual gearshifting ( Y page 109) RS RACE START For optimum acceleration from a standing start i Program mode RS cannot be selected while driving.
Selecting program mode C means: R The vehicle starts out more gentle, both forward and reverse, except when driving off with full throttle. R Traction and driving stability are improved on icy roads. R Upshifts occur earlier even when you give more gas.
reappears in the right multifunction display. or X Pull and hold right gearshift control ; until D reappears in the right multifunction display. The automatic transmission will shift from the current gear range directly into drive position D . Shifting into optimal gear range X Press and hold the gear selector lever to the left in the D- direction.
C Comfort For comfort driving S Sport For standard driving M MANUAL For manual gearshifting Program mode selector switch on vehicles with AMG Sport Package C Comfort For comfort driving S Sport For standard driving M Manual For manual gearshifting The current program mode appears in the right multifunction display ( Y page 107).
the maximum engine speed for each gear without overrevving the engine. X Shift the automatic transmission from current gear : into the next higher gear. The fuel supply will otherwise be interrupted to prevent the engine from overrevving. Downshifting G Warning! On slippery road surfaces, never downshift in order to obtain braking action.
As a result, you will not be able to see information about your driving conditions, such as R speed R outside temperature R warning/indicator lamps R malfunction/warning messages R failure of any systems Driving characteristics may be impaired. If you must continue to drive, do so with added caution.
Doing so may cause serious engine damage which is not covered by the Mercedes-Benz Limited Warranty. Resetting trip odometer X Make sure you are viewing the standard display ( Y page 116) in the multifunction display. X Press and hold the reset button in the instrument cluster ( Y page 111) until the trip odometer is reset.
= Press button ~ to end a call to reject an incoming call 6 to answer a call to dial 10 to redial 10 Press button W X to select submenus in the Settings menu to set values to operate the RACETIMER 11 .
: Outside temperature indicator ; Transmission position/gear range indicator = Trip odometer ? Automatic transmission program mode indicator A Main odometer For more information on menus displayed in the multifunction display, see “Menus and submenus” ( Y page 115).
Function B Vehicle status message memory 13 menu ( Y page 120) C Settings menu ( Y page 121) D Trip computer menu ( Y page 128) E Telephone menu ( Y page 129) Standard display menu Standard display : .
The engine oil temperature flashes if the engine oil temperature has not yet reached 80†. During this time, avoid driving at full engine speed. If the engine reaches the overspeed range in the manual shift program, the menu will be shown in red. In addition, you will see UP next to gear indicator ; as a reminder to upshift.
RACETIMER stops timing. Timing is resumed when you press button W after switching the ignition back on or restarting the engine. Saving lap time and starting a new lap You can save up to nine laps. X Press button X while the timer is running. The intermediate time will be shown for 5 seconds.
Each lap is shown in its own submenu. The fastest lap is indicated by flashing symbol : . : Lap number ; Lap time = Maximum speed during lap ? Average speed during lap A Lap length X Press button & or * to see other lap analyses.
Example illustration : Disc number ; Current track X Selecting next or previous track: Press button * or & briefly. X Selecting a track from the track list (quick search): Press and hold button * or & . The current track does not appear during Audio AUX mode operation.
The Vehicle status message memory menu only appears if messages have been stored. G Warning! Malfunction and warning messages are only indicated for certain systems and are intentionally not very detailed. The malfunction and warning messages are simply a reminder with respect to the operation of certain systems.
X Press the reset button in the instrument cluster ( Y page 111) for approximately 3 seconds. The request to press the reset button once more to confirm appears in the right multifunction display.
The following functions are available: R Selecting speedometer/odometer display mode ( Y page 123) (Canada only) R Selecting digital speedometer display mode ( Y page 123) R Selecting language ( Y pag.
Setting standard display X Press button V or U repeatedly until the Settings menu appears in the multifunction display. X Press button & . X Move the selection marker with button W or X to the Instr. Cluster submenu. X Press button & or * repeatedly until the message Select Display appears in the multifunction display.
For safety reasons, resetting all the functions of all submenus to the factory settings while driving ( Y page 121) will not deactivate the daytime running lamp mode. The following message appears in the multifunction display: Lighting Cannot be fully reset to factory settings while driving .
X Press button W or X to switch the headlamps delayed shut-off feature On or Off . X Turn the exterior lamp switch to position à before turning off the engine.
Convenience submenu Access the Convenience submenu via the Settings menu. Use the Convenience submenu to activate the easy-entry/exit feature ( Y page 127), or to set the fold-in function for exterior rear view mirrors ( Y page 127).
X Press button W or X to switch the function On or Off . Trip computer menu Use the Trip computer menu to call up statistical data on your vehicle. The following information is available: R Fuel consu.
Distance to empty X Press button U or V repeatedly until the first function of the Trip computer menu appears in the multifunction display. X Press button & or * repeatedly until the message Range: appears in the left multifunction display.
Dialing a number from the phone book When your telephone is ready to receive calls, you may select and dial a number from the phone book. You can add new numbers to the phone book with the telephone, see separate operating instructions. X Press button U or V repeatedly until the message TEL appears in the left multifunction display.
The currently set speed or last set speed (“Resume” function) appears in the left multifunction display: R USA only: e.g. CC 55 MPH R Canada only: e.g. ¯ 90 Km/h G Warning! The cruise control is a convenience system designed to assist the driver during vehicle operation.
the grade eases, the set speed will be resumed. On downhill grades, the cruise control maintains the set speed by braking with the vehicle’s brake system. In addition, on longer downhill grades the automatic transmission will downshift automatically.
X Briefly pull the cruise control lever in direction of arrow ? . If no speed is stored, the current speed is set and stored. X Remove your foot from the accelerator pedal.
G Warning! The Distronic cannot take weather conditions into account. Switch off the Distronic or do not switch it on if: R roads are slippery or covered with snow or ice. The wheels could lose traction while braking or accelerating, and the vehicle could skid.
Distronic displays in the speedometer When the Distronic is activated, set speed ; and distance warning lamp : appear in the speedometer. The vehicle speed displayed on the speedometer can briefly vary from the speed setting on the Distronic system.
Distronic deactivated When the Distronic is deactivated, you will see the standard display in the left multifunction display. : Preceding vehicle, if detected ; Actual distance to the preceding vehicl.
: White Distronic indicator lamp Ò ; Set speed The vehicle speed displayed on the speedometer can briefly vary from the speed setting on the Distronic system. Setting the current speed X Accelerate or decelerate to the desired speed. X Briefly lift the cruise control lever in direction of arrow : or depress in direction of arrow ; ( Y page 136).
Setting stored speed (Resume function) G Warning! The set speed stored in memory should only be set again if prevailing road conditions and legal speed limits permit. Possible acceleration or deceleration differences arising from returning to the preset speed could cause an accident and/or serious injury to you and others.
The thumbwheel for adjusting the following distance is located on the right side of the center console. X Increasing distance: Turn thumbwheel : towards ª . Increasing the distance setting tells Distronic to maintain a greater following distance to the preceding vehicle.
detect one too soon. This may cause your vehicle to brake late or unexpectedly. Offset driving A vehicle traveling in your lane but offset from your direct line of travel may not be detected by the Distronic. There will be insufficient distance to the preceding vehicle.
Example illustration (except SL 63 AMG) SL 63 AMG: The distance warning function on/off switch is located on the right side of the center console. X Activating/deactivating: Press switch : . When the distance warning function is activated, indicator lamp ; in switch : comes on.
Operator’s Manual appears in the right multifunction display. X Depress the accelerator pedal fully. The engine speed rises to approximately 4000 rpm. The message RACE START appears in the left multifunction display and the message Release Brake To Start appears in the right multifunction display.
The vehicle chassis ride height is raised or lowered according to the selected level setting and to the vehicle speed. With increasing speed, the ride height is reduced by up to approximately 0.5 in (12 mm). With decreasing speed, the ride height is again raised to the selected vehicle level.
Setting suspension tuning (except SL 63 AMG) X Start the engine. Suspension for sporty driving style The setting for sporty driving is selected when indicator lamp ; is on.
distance between the vehicle and an obstacle visually and audibly. The Parktronic system is activated automatically when R you switch on the ignition and R you release the parking brake and R the auto.
Front sensors Center approx. 40 in (100 cm) Corners approx. 24 in (60 cm) Rear sensors Center approx. 48 in (120 cm) Corners approx. 32 in (80 cm) Minimum distance Center approx.
segment illuminates and a constant acoustic warning lasting a maximum of 2 seconds will sound for the second red distance segment. The signal is canceled when the automatic transmission is shifted into park position P or the parking brake is engaged.
Climate control system Control panel Automatic climate control Function Recommendation/Notes 1 Air distribution display, driver’s side 2 Front defroster i Keep this setting selected only until the windshield or the side windows are clear again. ( Y page 153) 3 Air recirculation i Only use this function for a short time, e.
Function Recommendation/Notes b Air distribution and air volume (automatic mode) i Switch on the automatic mode. The indicator lamp in button à comes on.
X Turn temperature controls C or H ( Y page 148) clockwise or counterclockwise. The indicator lamp in button ^ goes out. or X Press button à . The indicator lamp in button à comes on. The air volume and air distribution are adjusted automatically. or X Press button ¬ .
or X Turn air volume control K clockwise or counterclockwise. The indicator lamp in button à goes out. Automatic air volume is switched off and is controlled according to the desired position. The automatic air distribution remains switched on. Setting the temperature You can adjust the air temperature on each side of the passenger compartment.
Side air vents Example illustration driver’s side : Left side defroster air vent, fixed ; Left side air vent, adjustable = Thumbwheel for air volume control for adjustable left side air vent X Opening/closing: Turn thumbwheel = upward or downward.
Adjusting air distribution The air distribution can be adjusted separately on each side of the passenger compartment with buttons Ä . The symbols on the controls represent the following functions: Sy.
MAX COOL is only operational when the engine is running. If the air distribution controls as well as the air volume control are set to à and there is a high need for cooling, MAX COOL is activated. “MAX COOL” appears in temperature controls C and H ( Y page 148).
The residual heat is deactivated automatically: R when the ignition is switched on R after approximately 30 minutes R if the battery voltage drops Rear window defroster G Warning! Any accumulation of snow and ice should be removed from the rear window before driving.
& on the SmartKey. This immediately interrupts the raising or lowering procedure. You then can operate the retractable hardtop switch or press button % or & on the SmartKey to raise or lower the retractable hardtop away from the danger zone ! Never sit or place heavy objects on the rear shelf.
X Close the luggage cover ( Y page 158). X Close the trunk lid. X Aim the transmitter eye at an outside door handle. The SmartKey must be in close proximity to the outside door handle. Opening (Summer opening feature) i Make sure the retractable hardtop is dry before you open it.
The wind screen is stored in the trunk. Installing X Leave the wind screen folded and place it on the roll bar. X Make sure the fastening straps are unbuckled. X Slide the wind screen into the roll bar until guide tabs : on each side latch underneath the roll bar.
! To prevent damage to the retractable hardtop or luggage/cargo when lowering the retractable hardtop: R Load trunk only to the height of the luggage cover. R Do not permit luggage/cargo to push up the closed luggage cover. R Do not place anything on top of or in front of the luggage cover.
X Open tensioning clasps A by pulling them downward. X Unhook retainer springs B from holders and flip retainer springs all the way up. C Luggage cover D Cloth end E Cloth holder X Carefully tilt luggage cover C in direction of arrow towards rear of trunk.
X Opening: Squeeze stop buttons : and guide the sunshade towards the rear. X Closing: Using handle ; , slide the sunshade towards the front of the vehicle. Loading and storing Parcel nets G Warning! Parcel nets are intended for storing light- weight items only, such as road maps, mail, etc.
You can also lock the storage compartments separately, e.g. when the vehicle is in the shop for service. The following storage compartments remain locked, even when the vehicle is unlocked with the Sm.
Door storage compartments G Warning! Keep the door storage compartments closed while vehicle is in motion. Failure to do so may cause the seat belt to catch at the rear and prevent proper positioning of the seat belt. : Release button ; Storage compartment lid X Opening: Press release button : .
X Securing luggage: Pull strap : out of holder ; . X Secure the luggage with strap : so that it cannot move. X Insert strap : into latch = . X Releasing strap: Press release button ? and guide strap : back to holder ; .
during braking, vehicle maneuvers, or in an accident. Liquids spilled on vehicle occupants may cause serious personal injury. Liquids spilled on vehicle equipment may cause damage not covered by the Mercedes-Benz Limited Warranty. When not in use, keep the cup holder closed.
Ashtray X Opening: Briefly touch cover plate : . X Removing ashtray insert: Secure vehicle from movement by engaging the parking brake. X Shift the automatic transmission into neutral position N . X Press sliding knob ; to the right. The ashtray insert will eject a short distance.
Tele Aid ! In order to activate the Tele Aid system, a subscriber agreement must be completed. To ensure your system is activated and operational, please press Information button E to perform the acquaintance call. Failure to complete either of these steps may result in a system that is not activated.
If a malfunction is indicated as outlined above, the system may not operate as expected. In case of an emergency, help will have to be summoned by other means.
X Briefly press on cover : to open. X Press SOS button ; briefly. The indicator lamp in SOS button ; will flash until the emergency call is concluded. X Wait for a voice connection to the Customer Assistance Center. X Close cover : after the emergency call is concluded.
system could not initiate a Roadside Assistance call (e.g. the relevant cellular phone network is not available). The message Call Failed appears in the multifunction display. X Terminating calls: Press button ~ on the multifunction steering wheel. or X Press the respective button for ending a telephone call on the COMAND system.
i When a Tele Aid call has been initiated, the COMAND system audio is muted. The mobile phone is no longer connected to the COMAND system. If you must use this phone, we recommend that you use it only with the vehicle at a standstill in a safe location.
Stolen Vehicle Recovery Services In the event your vehicle was stolen: X Report the incident to the police. The police will issue a numbered incident report. X Pass this number on to the Customer Assistance Center along with your password. The Customer Assistance Center will then attempt to covertly contact the vehicle’s Tele Aid system.
Do not hold the buttons for longer than 30 seconds. This procedure erases any previous settings for all three channels and initializes the memory. If you later wish to program a second and/or third hand-held transmitter to the remaining two signal transmitter buttons, do not repeat this step and begin directly with step 3.
X Step 12: Confirm the garage door operation by pressing the programmed signal transmitter button ( ; , = or ? ). X Step 13: To program the remaining two signal transmitter buttons, repeat the steps above starting with step 3.
Programming tips If you are having difficulty programming the integrated remote control, here are some helpful tips: R Check the frequency of hand-held remote control A (typically located on the reverse side of the remote). The integrated remote control is compatible with radio-frequency devices operating between 280-390 MHz.
X Move the driver’s seat or passenger seat as far to the rear as possible. X Removing: Pull floormat off of retainer pins ; . X Installing: Press floormat eyelets : onto retainer pins ; . 176 Useful features Controls in detail 230_AKB; 6; 22, en-US d2ureepe, Version: 2.
Vehicle equipment ............................ 178 The first 1000 miles (1500 km) ....... 178 At the gas station ............................. 178 Engine compartment ........................ 180 Tires and wheels ............................... 186 Winter driving .
Vehicle equipment i This Operator’s Manual describes all features, standard or optional, potentially available for your vehicle at the time of purchase. Please be aware that your vehicle might not be equipped with all features described in this manual.
Mercedes-Benz Center to have the fuel system drained completely. ! To prevent damage to the catalytic converters, only use premium unleaded gasoline in this vehicle.
Check regularly and before a long trip For information on quantities and requirements of operating agents, see “Fuels, coolants, lubricants, etc.” ( Y page 303).
X Push handle ; under the hood upwards. X Pull up on the hood and then release it. The hood will be held open at shoulder height by gas-filled struts automatically. Closing G Warning! When closing the hood, use extreme caution not to catch hands or fingers.
X Pull out oil dipstick : . X Wipe oil dipstick : clean. X Slowly insert oil dipstick : fully into the dipstick guide tube. X Pull out oil dipstick : again after approximately 3 seconds to obtain accurate reading. The oil level is correct when it is between lower (min) mark = and upper (max) mark ; of oil dipstick : .
If you see the message: Observe Waiting Time X If the engine is at operating temperature, wait 5 minutes before repeating check procedure. X If the engine is not at operating temperature yet, you must wait 30 minutes before checking oil. If you see the message: Engine Oil Level Not With Engine Running X Turn off the engine.
! Excess oil must be siphoned or drained off. It could cause damage to the engine and emission control system not covered by the Mercedes-Benz Limited Warranty. X Screw filler cap : back on filler neck. For more information on engine oil, see the “Technical data” section ( Y page 303) and ( Y page 305).
For more information on coolant, see the “Technical data” section ( Y page 304) and ( Y page 307). Washer system and headlamp cleaning system G Warning! Washer solvent/antifreeze is highly flammable. Do not spill washer solvent/ antifreeze on hot engine parts, because it may ignite and burn.
The brake fluid level is correct when it is between lower mark (MIN) ; and upper mark (MAX) : of the brake fluid reservoir. Tires and wheels Safety notes Contact an authorized Mercedes-Benz Center for information on tested and recommended rims and tires for summer and winter operation.
Recommended tire inflation pressure G Warning! Follow recommended tire inflation pressures. Do not underinflate tires. Underinflated tires wear excessively and/or unevenly, adversely affect handling and fuel economy, and are more likely to fail from being overheated.
Important notes on tire inflation pressure G Warning! If the tire inflation pressure drops repeatedly, check the tires for punctures from foreign objects and/or whether air is leaking from the valves or from around the rim.
Example illustration: Tire inflation pressures specific to rim diameter Potential problems associated with underinflated and overinflated tires Underinflated tires G Warning! Follow recommended tire inflation pressures.
Tire and Loading Information placard on the driver’s door B-pillar ( Y page 194). If necessary, add air to achieve the recommended tire inflation pressure. X If you have overfilled the tire, release tire inflation pressure by pushing the metal stem of the valve with e.
the system is not operating properly. The TPMS malfunction indicator is combined with the low tire pressure telltale. When the system detects a malfunction, the telltale will flash for approximately 1 minute and then remain continuously illuminated. This sequence will continue upon subsequent vehicle start-ups as long as the malfunction exists.
i USA only: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. this device must accept any interference received, including interference that may cause undesired.
X Press button & or * repeatedly until you see the current inflation pressures for each tire appear in the display or the following message appears in the multifunction display: Tire pressure displayed after driving for a few minutes. X Press the reset button ( Y page 111).
pressures for the original equipment tires on your vehicle. (2) The certification label, also found on the driver’s door B-pillar. It tells you about the gross weight capacity of your vehicle, called the Gross Vehicle Weight Rating (GVWR). The GVWR includes the weight of the vehicle, all occupants, fuel and cargo.
The seating capacity gives you important information on the number of occupants that can be in the vehicle. The Tire and Loading Information placard showing seating capacity : is located on the driver’s door B-pillar ( Y page 194).
Example 1 Example 2 Step 1 Combined weight limit of occupants and cargo from Tire and Loading Information placard 1 500 lbs 1 500 lbs Step 2 Number of occupants (driver and passengers) 1 2 Occupants w.
Maximum tire load G Warning! Do not overload the tires by exceeding the specified load limit as indicated on the Tire and Loading Information placard on the driver’s door B-pillar. Overloading the tires can overheat them, possibly causing a blowout.
Tire inspection Every time you check the tire inflation pressure, you should also inspect your tires for the following: R excessive treadwear ( Y page 198) R cord or fabric showing through the tire’s rubber R bumps, bulges, cuts, cracks or splits in the tread or side of the tire Replace the tire if you find any of the above conditions.
Uniform Tire Quality Grading Standards The Uniform Tire Quality Grading is a U.S. Government requirement designed to give drivers consistent and reliable information regarding tire performance. Tire manufacturers are required to grade tires based on three performance factors: treadwear : , traction ; , and temperature resistance = .
not covered with snow or ice. Exercise appropriate caution. ! Avoid spinning of a drive wheel. This may cause serious damage to the drivetrain which is not covered by the Mercedes-Benz Limited Warranty. Temperature G Warning! The temperature grade for this tire is established for a tire that is properly inflated and not overloaded.
Following are some explanations for the markings on your vehicle’s tires: : Uniform Tire Quality Grading Standards ( Y page 199) ; DOT, Tire Identification Number ( Y page 204) = Maximum tire load (.
Aspect ratio Aspect ratio ; is the dimensional relationship between tire section height and section width and is expressed in percentage. The aspect ratio is arrived at by dividing section height by section width. Tire code Tire code = indicates the tire construction type.
Index Speed rating ZR...(..Y) above 186 mph (300 km/h) ZR above 149 mph (240 km/h) R At the tire manufacturer’s option, any tire with a speed capability above 149 mph (240 km/h) can include a “ZR” in the size designation (for example: 245/40 ZR18).
Load identification i For illustration purposes only. Actual data on tires are specific to each vehicle and may vary from data shown in above illustration. In addition to the load index, special load identification : may be molded into the tire sidewall following the letter designating the speed symbol B ( Y page 201).
Tire type code Tire type code ? may, at the option of the manufacturer, be used as a descriptive code for identifying significant characteristics of the tire.
GAWR (Gross Axle Weight Rating) The GAWR is the maximum permissible axle weight. The gross vehicle weight on each axle must never exceed the GAWR for the front and rear axle indicated on the certification label located on the driver’s door B-pillar.
Sidewall The portion of a tire between the tread and the bead. TIN (Tire Identification Number) Unique identifier which facilitates efforts by tire manufacturers to notify purchasers in recall situations or other safety matters concerning tires and gives purchasers the means to easily identify such tires.
Always use winter tires at temperatures below 45‡ (7†) and whenever wintry road conditions prevail. Not all M+S rated tires provide special winter performance. Make sure the tires you use show the mountain/ snowflake i marking on the tire sidewall.
G Warning! The outside temperature indicator is not designed to serve as an ice-warning device and is therefore unsuitable for that purpose. Indicated temperatures just above the freezing point do not guarantee that the road surface is free of ice. The road may still be icy, especially in wooded areas or on bridges.
carpets in the footwell, make sure that the pedals still have sufficient clearance. During sudden driving or braking maneuvers, the objects could get caught between the pedals. You could then no longer brake or accelerate. This could lead to accidents and injury.
considerable force prior to parking. The heat generated serves to dry the brakes. Salt-covered roads G Warning! A layer of salt on the brake discs and the brake linings may cause a delay in the braking effect, resulting in a significantly increased braking distance, which could lead to an accident.
provide optimum braking efficiency. Until that time, you may need to use increased brake pedal pressure while braking. Please be aware of this and adjust your driving and braking accordingly during this break-in period. Excessive high-demand braking will cause correspondingly high brake wear.
Control and operation of radio transmitter Safety notes G Warning! Please do not forget that your primary responsibility is to drive the vehicle. A driver’s attention to the road must always be his/her primary focus when driving.
Maintenance service indicator message Information on maintenance work and maintenance intervals are specified in the Maintenance Booklet. Contact an authorized Mercedes-Benz Center, or visit www.mbusa.com (USA only) for additional information. The maintenance service indicator message will notify you when the next maintenance service is required.
until the standard display ( Y page 116) appears in the multifunction display. X Press button * or & on the multifunction steering wheel until the maintenance service indicator display with the service symbol ¯ or ± appears in the left multifunction display and the maintenance service deadline appears in the right multifunction display.
R Coolant R Brake fluid R Bird droppings R Insects R Tree resins etc. Frequent washing reduces and/or eliminates the aggressiveness and potency of the above adverse influences.
Mercedes-Benz approved Paint Cleaner should be applied if the paint surface shows signs of embedded dirt (i.e. loss of gloss). Do not apply any of these products or wax if your vehicle is parked in the sun or if the hood is still hot. X Use the appropriate MB-Touch-Up Stick for quick and provisional repairs of minor paint damage (i.
Do not allow cleaning agents to dry on the finish. Automatic car wash You can have your vehicle washed in an automatic car wash from the start. Brushless car washes are preferable. X To protect the filter system, activate the air recirculation mode using button g on the climate control panel.
To clean Distronic system sensor cover : and the bumper area near sensors ; observe the following: R Use a mild vehicle wash detergent, such as Mercedes-Benz approved Car Shampoo, with plenty of water.
Light alloy wheels If possible, clean wheels once a week. X Use Mercedes-Benz approved Wheel Care, a soft bristle brush and a strong spray of water for cleaning the light alloy wheels. ! Only use acid-free cleaning materials. Acid may cause corrosion or damage the clear coat.
G Warning! Do not bleach or dye seat belts as this may severely weaken them. In a crash they may not be able to provide adequate protection. Upholstery Using aftermarket seat covers or wearing clothing that have the tendency to give off coloring (e.g.
222 230_AKB; 6; 22, en-US d2ureepe, Version: 2.11.8.1 2009-07-28T18:49:58+02:00 - Seite 222.
Vehicle equipment ............................ 224 Where will I find ...? .......................... 224 Vehicle status messages in the multifunction display ....................... 226 What to do if … .................................. 254 Unlocking/locking manually .
Vehicle equipment i This Operator’s Manual describes all features, standard or optional, potentially available for your vehicle at the time of purchase. Please be aware that your vehicle might not be equipped with all features described in this manual.
X To access jack and wheel wrench: Remove storage well casing = . X Remove the spare wheel ( Y page 225). A Jack B Wheel wrench Jack G Warning! Only use the jack supplied with your vehicle to lift the vehicle briefly for wheel changes.
X Screw the valve cap back onto the valve. i Vehicles with 19" spare wheel only: Before placing the spare wheel in the spare wheel well fasten tensioning straps, see “Compressing the collapsible tire” ( Y page 226). X Place the spare wheel into the spare wheel well.
Benz Limited Warranty, or result in property damage or personal injury. G Warning! No messages will be displayed if either the instrument cluster or the multifunction display is inoperative.
Display messages Possible causes/consequences and M Solutions ABS ABS, ESP Unavailabl e See Oper. Manual The electro-hydraulic brake system is still functioning normally but due to a malfunction, the ABS, the BAS, the ESP ® , and the hill-start assist system (SL 63 AMG only) are unavailable.
Display messages Possible causes/consequences and M Solutions Front Passeng. Airbag Enabled See Oper. Manual The passenger front air bag is activated while driving even though a child, small individual, or object below the system’s weight threshold is on the passenger seat, or the passenger seat is empty.
G Warning! If the 45 indicator lamp remains out even after performing the above corrective steps, do not have any children 12 years old and under and other small individuals use the passenger seat until the system has been repaired. Display messages Possible causes/consequences and M Solutions Front Passeng.
Driving systems Display messages Possible causes/consequences and M Solutions ABC Malfunctio n Stop Car You have started driving although the vehicle level is still too low. The vehicle is being raised. The ABC message goes out after a few seconds. X Stop the vehicle in a safe location or as soon as it is safe to do so.
Display messages Possible causes/consequences and M Solutions ABC Vehicle Rising Please Wait The vehicle’s level is too low while at a standstill. The vehicle will be raised. X Do not drive off. X Wait until the message disappears from the multifunction display.
Display messages Possible causes/consequences and M Solutions DISTRONIC Currently Unavailabl e. See Oper. Manual Distronic is deactivated because: R The Distronic cover in the radiator grille is dirty. R The functionality is impaired by heavy precipitation or fog.
Vehicle Display messages Possible causes/consequences and M Solutions P Gear Selector Lever To P You have attempted to start the engine with the KEYLESS-GO start/stop button while the automatic transmission was not in park position P . X Shift the automatic transmission into park position P .
Display messages Possible causes/consequences and M Solutions Tire Pressure Monitor Wheel Sensor Missing At least one sensor is defect (e.g. battery is empty). The respective tire is indicated by – – instead of the tire inflation pressure in the multifunction display.
Display messages Possible causes/consequences and M Solutions Check Tires The tire inflation pressure in at least one tire is significantly below the reference value. The respective tire is indicated in the multifunction display. X Carefully bring the vehicle to a halt, avoiding abrupt steering and braking maneuvers.
Symbol messages Brake Display messages Possible causes/consequences and M Solutions # Reduced Brake Effect Depress brake pedal fully. The electro-hydraulic brake system is in emergency operation mode. Considerably greater brake pedal force is required and the brake pedal travel is longer.
towing methods and the vehicle requires towing with all four wheels on the ground. Towing the vehicle with all four wheels on the ground is only permissible for distances up to 30 miles (50 km) and at a speed not to exceed 30 mph (50 km/h). For more information, see “Towing the vehicle”.
Display messages Possible causes/consequences and M Solutions $ (USA only) J (Canada only) Check Brake Fluid Level There is insufficient brake fluid in the reservoir. Risk of accident! X Stop the vehicle in a safe location or as soon as it is safe to do so.
Safety systems Display messages Possible causes/consequences and M Solutions I Raise Roll-over Bar The roll bar is malfunctioning. For safety reasons, always have the roll bar raised when driving with the retractable hardtop open. X Attempt to raise the roll bar using the roll bar button ( Y page 51).
Vehicle Display messages Possible causes/consequences and M Solutions N The trunk is open. X Close the trunk ( Y page 75). L You are driving with the hood open. X Stop the vehicle in a safe location as soon as it is safe to do so. X Close the hood ( Y page 181).
Display messages Possible causes/consequences and M Solutions K Retractabl e Roof Operation Only At Standstill You have attempted to open the retractable hardtop while driving.
Display messages Possible causes/consequences and M Solutions + Key Not Detected (message appears in red) The SmartKey with KEYLESS-GO is not detected while the engine is running because there is strong radio-frequency interference. X Stop the vehicle as soon as it is safe to do so.
Engine Display messages Possible causes/consequences and M Solutions = or ; Engine Service There may be a malfunction in R the fuel management system R the ignition system R the exhaust system R the fuel system X Have the engine checkedas soon as possible at an authorized Mercedes-Benz Center.
Display messages Possible causes/consequences and M Solutions ? Coolant Stop car, switch engine off. The coolant is too hot. X Stop the vehicle immediately as soon as it is safe to do so. X Turn off the engine immediately. X Engage the parking brake. X Only start the engine again after the message disappears.
Display messages Possible causes/consequences and M Solutions ? Coolant Stop car, switch engine off. The poly-V-belt could be broken. X Stop the vehicle immediately as soon as it is safe to do so. X Turn off the engine immediately. X Check the poly-V-belt.
Display messages Possible causes/consequences and M Solutions # The battery is no longer charging. Possible causes: R alternator malfunctioning R broken poly-V-belt R a malfunction in the electronic system Do not forget that the brake system requires electrical energy and may be operating with restricted capability.
Display messages Possible causes/consequences and M Solutions 4 Add 1 qt engine oil at next refueling. (USA only) Add 1 liter engine oil at next refueling. (Canada only) Vehicles with engine oil measuring system only: The engine oil level is too low. X Add engine oil ( Y page 183) and check the engine oil level ( Y page 181).
Display messages Possible causes/consequences and M Solutions 4 Engine Oil Level Stop car, switch engine off. The engine oil level is too low. There is a danger of engine damage. X Stop the vehicle in a safe location or as soon as it is safe to do so.
Display messages Possible causes/consequences and M Solutions b Brake Lamp Left Auxiliary Bulb On or Brake Lamp Right Auxiliary Bulb On The left or right brake lamp is malfunctioning. A substitute bulb is being used. X Contact an authorized Mercedes-Benz Center as soon as possible.
Display messages Possible causes/consequences and M Solutions b Parking Lamp Front Left Auxiliary Bulb On or Parking Lamp Front Right Auxiliary Bulb On The left or right front parking lamp is malfunctioning. A substitute bulb is being used. X Replace the bulb as soon as possible ( Y page 271).
Display messages Possible causes/consequences and M Solutions b Rear Foglamp Left The rear fog lamp is malfunctioning. X Contact an authorized Mercedes-Benz Center as soon as possible.
Display messages Possible causes/consequences and M Solutions b Turn Signal Front Left Auxiliary Bulb On or Turn Signal Front Right Auxiliary Bulb On The left or right front turn signal lamp is malfunctioning. A substitute bulb is being used. X Contact an authorized Mercedes-Benz Center as soon as possible.
Display messages Possible causes/consequences and M Solutions h Tire Pressure Check Tires The tire inflation pressure in at least one tire is significantly below the reference value. X Carefully bring the vehicle to a halt, avoiding abrupt steering and braking maneuvers.
Brake Problem Possible causes/consequences and M Solutions ! The yellow ABS indicator lamp comes on while the engine is running. The ABS has detected a malfunction and switched off. The BAS, the ESP ® , and the hill-start assist system (SL 63 AMG only) are also switched off.
Problem Possible causes/consequences and M Solutions $ (USA only) J (Canada only) The red brake warning lamp comes on while the engine is running and an acoustic warning sounds. There is a malfunction in the electro-hydraulic brake system. There is insufficient brake fluid in the reservoir.
Problem Possible causes/consequences and M Solutions 7 The red seat belt telltale comes on while the vehicle is standing still and the engine is running or while driving. You and/or your passenger have forgotten to fasten your seat belts. X Fasten your seat belts.
Problem Possible causes/consequences and M Solutions I The yellow roll bar warning lamp comes on when the engine is running. The roll bar system is malfunctioning. For safety reasons, always have the roll bar raised when driving with the retractable hardtop open.
Problem Possible causes/consequences and M Solutions å The yellow ESP ® OFF warning lamp comes on while the engine is running. The ESP ® has been switched off. Risk of accident! When the ESP ® is switched off it will not stabilize the vehicle if the system recognizes that the vehicle starts to skid or that a wheel is spinning.
Problem Possible causes/consequences and M Solutions ÷ The yellow ABS/ ESP ® warning lamp flashes while driving. The ABS, the ESP ® , or the Electronic Traction System (ETS) has come into operation because of detected traction loss in at least one tire.
Problem Possible causes/consequences and M Solutions d % SL 63 AMG only: The yellow ABS/ ESP ® warning lamp and the yellow ESP OFF warning lamp come on while the engine is running.
Driving systems Problem Possible causes/consequences and M Solutions Ò The white Distronic indicator lamp comes on while driving. The Distronic distance sensor has recognized a preceding vehicle. Ò The red distance warning lamp comes on while driving and an acoustic warning sounds.
Engine Problem Possible causes/consequences and M Solutions = (USA only 19 ) ; (Canada only 19 ) The yellow engine malfunction indicator lamp comes on when the engine is running.
Problem Possible causes/consequences and M Solutions ? The red coolant temperature warning lamp comes on when the engine is running and an acoustic warning sounds. The coolant temperature has exceeded 248‡ (120†). X Stop in a safe location as soon as possible and allow the engine and coolant to cool down.
Tires Problem Possible causes/consequences and M Solutions h USA only: Combination low tire pressure telltale/TPMS malfunction telltale for the Advanced TPMS illuminates continuously. Canada only: Low tire pressure telltale for the Advanced TPMS illuminates continuously.
Underinflation also reduces fuel efficiency and tire tread life, and may affect the vehicle’s handling and stopping ability. Please note that the TPMS is not a substitute for proper tire maintenance.
Problem Possible causes/consequences and M Solutions 45 The passenger front air bag off indicator lamp does not illuminate and/or does not remain illuminated with the weight of a typical 12-month-old child in a standard child restraint or less on the passenger seat.
Unlocking the driver’s door X Insert mechanical key ; into the driver’s door lock. X Turn mechanical key ; counterclockwise to position 1 until the locking knob moves up. The driver’s door is unlocked. X Pull the door handle to open the driver’s door.
Locking the vehicle If you cannot lock the vehicle with the SmartKey or with KEYLESS-GO, lock it as follows: X Open the driver’s door. X Close the passenger door and the trunk. X Press the central locking switch ( Y page 73). X Check to see whether the locking knob on the passenger door has moved down.
locked or unlocked. It is recommended to have the batteries replaced at an authorized Mercedes-Benz Center. G Warning! Batteries contain poisonous and corrosive substances. Therefore, keep the batteries out of reach of children. If a battery is swallowed, seek medical help immediately.
SmartKey with KEYLESS-GO X Insert mechanical key : into opening. X Press mechanical key : in direction of arrow. Battery compartment ; is unlatched. X Pull battery compartment ; out of the SmartKey housing. X Pull out batteries = . X Insert new batteries = under contact springs ? with the positive terminal (+) side facing up.
Bulbs You can replace the following bulbs yourself: Bi-Xenon headlamps Type : High-beam flasher lamp: H7 55 W ; Corner-illuminating lamp: H7 55 W = Parking and standing lamp: W 5 W Rear lamps Type : T.
G Observe Safety notes, see page 271. R Only use 12-volt bulbs of the same type and with the specified watt rating. R Switch the lights off before changing a bulb to prevent short circuits. R Always use a clean lint-free cloth when handling bulbs. R Your hands should be dry and free of oil and grease.
X Turn bulb socket = clockwise until it engages. Driver’s side headlamp: Cable outlet ? of bulb socket = must point towards the lower right. Passenger-side headlamp: Cable outlet ? of bulb socket = must point towards the lower left. X Place bulb socket ; back into the housing.
Replacing bulbs Example illustration: Bulb socket passenger side : Turn signal lamp ; Backup lamp i The lamps on the driver’s side are mirrored. X Depending on which bulb needs to be replaced, turn the respective bulb socket counterclockwise and remove it.
Placing wiper arms in vertical position Wiper arms in vertical position X Make sure the hood is fully closed. Vehicles with SmartKey X Turn the SmartKey in the starter switch to position 1 . X Turn the combination switch to wiper setting II . X With wiper arms in vertical position, turn the SmartKey in the starter switch to position 0 .
change when driving with a spare wheel mounted. Adapt your driving style accordingly. The spare wheel is for temporary use only. When driving with a spare wheel mounted, ensure proper tire inflation pressure and do not exceed a vehicle speed of 50 mph (80 km/h).
X Press on both clips ; simultaneously to release buckle : . X Store the tensioning straps in a safe place. You will need them to store the spare wheel in the trunk after use ( Y page 225). Lifting the vehicle G Warning! When jacking up the vehicle, only use the jack which has been specifically approved by Mercedes-Benz for your vehicle.
G Warning! When turning the wheel wrench to loosen the wheel bolts, make sure you position your hands on the wrench in such a way that you avoid injury to yourself, such as scraping your hands against the wheel. Make sure turning the wheel wrench will not scratch or damage the wheel rim.
! Do not place wheel bolts in sand or dirt. This could result in damage to the wheel bolts and wheel hub threads. X Remove the wheel. Attaching the spare wheel G Warning! Inflate collapsible tire only after the wheel is properly attached. Inflate the collapsible tire using the electric air pump before lowering the vehicle.
The following description applies to both versions. Differences in usage are expressly declared. Version 1 Version 2 X Version 1 only: Open flap : on electric air pump. X Version 1 only: Pull out electrical plug = and air hose with pressure gauge and vent screw ? .
pressure as specified for your vehicle ( Y page 303), decrease tire pressure using the vent screw on air hose ? . X Version 2 only: If the tire inflation pressure is above the recommended tire inflation pressure as specified for your vehicle ( Y page 303), decrease tire pressure using deflate button B .
Be careful not to damage the locking tabs or clamp the plastic retaining strap. MOExtended system The MOExtended system allows you to continue driving your vehicle even if there is a total loss of pressure in one or more tires. You may only use the MOExtended system in conjunction with the Advanced TPMS ( Y page 190).
Risk of explosion. Fire, open flames and smoking are prohibited when handling batteries. Avoid creating sparks. Battery acid is caustic. Do not allow it to come into contact with skin, eyes or clothing. Wear suitable protective clothing, especially gloves, apron and faceguard.
The factory-equipped battery may only be replaced with a battery that R has the same security features R is of identical size R is of identical voltage R is of identical capacity ! As any other battery, the battery may discharge if you do not operate the vehicle for an extended period of time.
flush affected area with water, and seek medical help if necessary. A battery will also produce hydrogen gas, which is flammable and explosive. Keep flames or sparks away from battery, avoid improper connection of jumper cables, smoking, etc. Attempting to jump start a frozen battery can result in it exploding, causing personal injury.
Position A represents the charged battery of another vehicle or an equivalent starter pack. X Remove cover from battery positive terminal ; . ! Never invert the terminal connections! X Connect positive terminal : of charged battery A with positive terminal ; with a jumper cable.
warning lamp comes on and warning messages appear in the multifunction display while driving. To brake, the driver must then apply significantly greater brake pedal pressure and depress the pedal much further to obtain the expected braking effect. If necessary, apply full pressure to the brake pedal.
USA only X Press mark on cover : as indicated by the arrow. X Lift cover : off to reveal the threaded hole for the towing eye bolt. Canada only X Press mark on cover : as indicated by the arrow and pull on lower edge simultaneously. X Lift cover : off to reveal the threaded hole for the towing eye bolt.
Removing towing eye bolt X Loosen towing eye bolt ; by turning it counterclockwise. X Unscrew towing eye bolt ; . X Reinstalling front cover: Fit locking tabs of cover : ( Y page 288) under the lower edge of the opening in the bumper. X Apply even pressure on the upper part of the cover until it snaps into place.
Fuses Introduction The electrical fuses in your vehicle serve to switch off malfunctioning power circuits. If a fuse is blown, the components and systems secured by that fuse will stop operating.
Fuse box in engine compartment The fuse boxes are located on the driver’s and passenger side in front of the bulkhead (wall separating the engine and passenger compartment). X Open the hood. Fuse box on driver’s side Fuse box on passenger side X With a dry cloth, remove any moisture from fuse box cover : .
Vehicle equipment ............................ 294 Parts service ..................................... 294 Warranty coverage ........................... 294 Identification labels .......................... 294 Vehicle specification SL 550 (230.471) ..
Vehicle equipment i This Operator’s Manual describes all features, standard or optional, potentially available for your vehicle at the time of purchase. Please be aware that your vehicle might not be equipped with all features described in this manual.
The Vehicle Identification Number (VIN) can be found R on certification label : on the driver’s door B-pillar R embossed underneath a trim below the passenger-side rear storage compartment lid ( Y page 295) R on the lower edge of the windshield ( Y page 295) Example certification label (U.
Vehicle specification SL 550 (230.471) The quoted data apply only to the standard vehicle. Contact an authorized Mercedes- Benz Center for the corresponding data of all special bodies and special equipment. Engine SL 550 Engine, type 273 Mode of operation 4-stroke engine, gasoline injection No.
Engine SL 600 Engine, type 275 Mode of operation 4-stroke engine, gasoline injection No. of cylinders 12 Bore 3.23 in (82.00 mm) Stroke 3.43 in (87.00 mm) Total piston displacement 336.4 cu in (5 513 cm 3 ) Compression ratio 9.0:1 Output acc. to SAE J 1349 23 510 hp/5 000 rpm (380 kW/5 000 rpm) Maximum torque acc.
Engine SL 63 AMG Engine, type 156 Mode of operation 4-stroke engine, gasoline injection No. of cylinders 8 Bore 4.02 in (102.20 mm) Stroke 3.72 in (94.60 mm) Total piston displacement 378.8 cu in (6 208 cm 3 ) Compression ratio 11.3:1 Output acc. to SAE J 1349 26 518 hp/6 800 rpm (386 kW/6 800 rpm) Maximum torque acc.
Engine SL 65 AMG Compression ratio 9.0:1 Output acc. to SAE J 1349 29 603 hp/ 4 800 - 5 100 rpm (450 kW/ 4 800 - 5 100 rpm) Maximum torque acc. to SAE J 1349 738 lb-ft/ 2 000 - 4 000 rpm (1 000 Nm/ 2 .
Using tires other than those approved by Mercedes-Benz may result in damage that is not covered by the Mercedes-Benz Limited Warranty. For information on driving with MOExtended tires, see the “Practical hints” section ( Y page 283).
Same size tires SL 550 SL 550 (Sport Package) SL 600 SL 600 (Sport Package) SL 63 AMG 18" wheels Rims (light alloy) Wheel offset 8.5 J x 18 H2 1.38 in (35 mm) — AMG rims (light alloy) Wheel offset — 8.
Mixed size tires SL 550 35 SL 600 35 18" wheels Front axle Rims (light alloy) Wheel offset 8.5 J x 18 H2 1.38 in (35 mm) 8.5 J x 18 H2 1.38 in (35 mm) Summer tires 36 255/40 R18 95W or 255/40 R18 95Y MOExtended 37 255/40 R18 95Y or 255/40 R18 95Y MOExtended 37 Rear axle Rims (light alloy) Wheel offset 9.
Spare wheel ! Compare the recommended tire inflation pressure for your vehicle with the tire inflation pressure on the yellow label located on the spare wheel rim.
If a service fluid is swallowed, contact a physician immediately. Model Capacity Fuels, coolants, lubricants, etc. Engine with oil filter SL 550 SL 65 AMG 9.0 US qt (8.5 l) Approved engine oils SL 600 SL 63 AMG 8.5 US qt (8.0 l) Automatic transmission SL 550 9.
Model Capacity Fuels, coolants, lubricants, etc. Fuel tank All models 21.1 US gal (80.0 l) Premium unleaded gasoline (Minimum Posted Octane 91 [Avg. of 96 RON/86 MON]) Fuel tank reserve SL 550 SL 600 approx. 2.6 US gal (10.0 l) SL 63 AMG SL 65 AMG approx.
Model Engine, type MB sheet number SL 63 AMG 156 229.5 43 SL 65 AMG 275 229.5 i MB sheet numbers are printed on the outside of oil containers. Viscosity grades for engine oils Using the chart below, select oil viscosity according to the lowest air temperature expected before the next oil change.
with premium unleaded gasoline as soon as possible. R Avoid full throttle driving and abrupt acceleration. R Do not exceed an engine speed of 3 000 rpm if the vehicle is loaded with a light load such as two persons and no luggage.
approximately -35‡ (-37†) and corrosion protection. ! Add premixed coolant solution only. Adding water and MB 325.0 Anticorrosion/ Antifreeze separately from each other, could cause engine damage not covered by the Mercedes-Benz Limited Warranty.
Model Approximate freeze protection -35‡ (-37†) -49‡ (-45†) Cooling system SL 550 6.1 US qt (5.8 l) 6.8 US qt (6.4 l) SL 600 7.9 US qt (7.5 l) 8.7 US qt (8.3 l) SL 63 AMG 6.0 US qt (5.65 l) 6.6 US qt (6.2 l) SL 65 AMG 7.4 US qt (7.0 l) 8.1 US qt (7.
310 230_AKB; 6; 22, en-US d2ureepe, Version: 2.11.8.1 2009-07-28T18:49:58+02:00 - Seite 310.
311 230_AKB; 6; 22, en-US d2ureepe, Version: 2.11.8.1 2009-07-28T18:49:58+02:00 - Seite 311.
312 230_AKB; 6; 22, en-US d2ureepe, Version: 2.11.8.1 2009-07-28T18:49:58+02:00 - Seite 312.
Service and Literature Your authorized Mercedes-Benz Center has trained technicians and Genuine Mercedes- Benz Parts to service your vehicle properly. For expert advice and quality service, contact an authorized Mercedes-Benz Center.
Order no. 6515 3100 13 Part no. 230 584 93 96 Edition A 2011 É2305849396dËÍ 2305849396 230_AKB; 6; 22, en-US d2ureepe, Version: 2.11.8.1 2009-07-28T18:49:58+02:00 - Seite 314.
Ein wichtiger Punkt beim Kauf des Geräts Mercedes-Benz 2011 SL65 AMG (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Mercedes-Benz 2011 SL65 AMG noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Mercedes-Benz 2011 SL65 AMG - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Mercedes-Benz 2011 SL65 AMG reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Mercedes-Benz 2011 SL65 AMG erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Mercedes-Benz 2011 SL65 AMG besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Mercedes-Benz 2011 SL65 AMG verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Mercedes-Benz 2011 SL65 AMG. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Mercedes-Benz 2011 SL65 AMG gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
