Benutzeranleitung / Produktwartung 2011 R350 Crossover des Produzenten Mercedes-Benz
Zur Seite of 364
R-Class Operator's Manual BA 251 USA, CA Edition A 2011; 1; 3, en-US d2sboike Version: 3.0.3.5 2010-04-16T14:31:55+02:00 - Seite 1.
Symbols Registered trademarks: R AdBlue ® is a registered trademark of the Association of German Automobile Manufacturers (VDA). R BabySmart™ is a registered trademark of the Siemens Automotive Corp. R Bluetooth ® is a registered trademark of the Bluetooth SIG Inc.
Welcome to the world of Mercedes-Benz Before you drive off, please familiarize yourself with your vehicle and read this manual, especially the safety and warning notices. This will help you to obtain the maximum pleasure from your vehicle and to avoid endangering yourself and others.
BA 251 USA, CA Edition A 2011; 1; 3, en-US d2sboike Version: 3.0.3.5 2010-04-16T14:31:55+02:00 - Seite 2.
Index ....................................................... 4 Introduction ......................................... 19 At a glance ........................................... 25 Safety ................................................... 35 Opening and closing .
1, 2, 3 ... 115 V socket ...................................... 266 12 V socket ........................................ 265 4ETS (Electronic Traction System) Function/notes ................................ 69 4MATIC (permanent four-wheel drive) .....
B BAS (Brake Assist System) ................. 68 Battery Charging ........................................ 310 Checking (SmartKey) ....................... 78 Display message ............................ 226 Important safety guidelines (SmartKey) .....
Center console ..................................... 31 2nd row of seats ............................ 249 Central locking Automatic locking (on-board computer) ...................................... 208 SmartKey .......................................
Customer Relations Department ....... 22 D Dashboard see Cockp it Date (on-board computer) ................ 206 Daytime driving lights Display message ............................ 223 Switching on/off (on-board computer) ..............................
Towing a trailer .............................. 193 Wet road surface ........................... 170 Winter ............................................ 172 DVD audio (on-board computer) ...... 203 E EASY-ENTRY feature ......................... 110 3rd row of seats .
Flat tire Changing a wheel/mounting the spare wheel ................................... 301 MOExtended run-flat system ......... 307 Preparing the vehicle ..................... 296 Raising the vehicle ......................... 303 TIREFIT kit ........
SRS ................................................ 241 Tire pressure monitor .................... 243 Insect protection on the radiator .... 279 Instrument cluster Overview .......................................... 28 Selecting the language (on-board computer) .
Malfunctions relevant to safety Reporting ......................................... 23 mbrace Call priority .................................... 271 Display message ............................ 215 Downloading destinations (COMAND) ...................
Instrument cluster submenu .......... 205 Lighting submenu .......................... 206 Message memory menu ................. 213 Navigation menu ............................ 204 Operating video DVD ..................... 204 Operation ..............
Rear seat Adjusting ....................................... 103 Rear view camera Function/notes ............................. 189 Rear view camera (cleaning instructions) ...................................... 287 Rear-view mirror Anti-glare (manual) .
Switching seat heating on/off ....... 108 Switching the seat ventilation on/ off .................................................. 108 Seat ventilation Indicator lamp (Malfunction) .......... 109 Securing hooks .................................. 256 Sensors (cleaning instructions) .
Steering wheel heating .................. 110 Storing settings (memory function) ........................................ 114 Steering wheel heating Indicator lamp (Malfunction) .......... 110 Steering wheel paddle shifters ........ 158 Stowage compartments 3rd row of seats .
Tire pressure monitoring system Function/notes ............................. 327 Restarting ...................................... 329 Tires Aspect ratio (definition) ................. 342 Average weight of the vehicle occupants (definition) .........
Trailer towing .................................... 158 Blind Spot Assist ............................ 193 ESP ® ................................................ 70 PARKTRONIC ................................. 188 Transfer case ......................
Switching on/off ........................... 126 Troubleshooting ............................. 129 Winter operation ............................... 172 Radiator cover ............................... 279 Wiper blades Cleaning ..........................
Product information We recommend using genuine Mercedes- Benz parts as well as conversion parts and accessories explicitly approved by us for your vehicle model. We have tested these parts to determine their reliability, safety and special suitability for Mercedes-Benz vehicles.
Information for customers in California Under California law you may be entitled to a replacement of your vehicle or a refund of the purchase price or lease price, if after a reasonable number of repa.
Change of address or ownership In the event of a change of address, be sure to send in the "Change of Address Notice" found in the Service and Warranty Information Booklet, or simply call the Mercedes-Benz Customer Assistance Center (in the USA) at 1-800-FOR-MERCedes (1-800-367-6372) or Customer Service (in Canada) at 1-800-387-0100.
Contact an authorized Mercedes-Benz Center for repairs or modifications to electronic components. Other improper work or modifications on the vehicle could also have a negative impact on the operating safety of the vehicle. Some safety systems only function when the engine is running.
Reporting malfunctions relevant to safety For the USA only: The following text is reproduced as required of all manufacturers according to Title 49, Code of U.S. Federal Regulations, Part 575 pursuant to the National Traffic and Motor Vehicle Safety Act of 1966.
24 BA 251 USA, CA Edition A 2011; 1; 3, en-US d2sboike Version: 3.0.3.5 2010-04-16T14:31:55+02:00 - Seite 24.
Exterior view ....................................... 26 Cockpit ................................................. 27 Instrument cluster .............................. 28 Multifunction steering wheel ............. 30 Center console ...................
Exterior view Function Page : Tailgate Vehicle tool kit 294 ; Rear window defroster 143 = Lights 121 ? Fuel filler flap 160 A Exterior mirrors 112 B Sliding sunroof 91 C Defrosting the windshield 142 .
Cockpit Function Page : Steering wheel paddle shifters 158 ; Cruise control lever 173 = Instrument cluster 28 ? Horn A DIRECT SELECT lever 155 B PARKTRONIC warning display 186 C Overhead control panel.
Instrument cluster Overview Function Page : Speedometer ; Sets the instrument cluster lighting: dimmer = Reset button ? Sets the instrument cluster lighting: brighter Function Page A Tachometer 198 B Fuel gauge C Multifunction display 199 D Clock 206 28 Instrument cluster At a glance BA 251 USA, CA Edition A 2011; 1; 3, en-US d2sboike Version: 3.
Warning and indicator lamps Function Page : Brakes (USA only) 236 ; ESP ® 240 = Distance warning lamp 4 243 ? Turn signal 119 A Turn signal 119 B Diesel engine: preglow 150 C SRS 241 D Low-beam headl.
Multifunction steering wheel Function Page : Multifunction display 199 ; COMAND APS; see the separate operating instructions = ~6 Makes/accepts or rejects/ ends a call 211 WX Selects submenus in the S.
Center console Function Page : COMAND APS; see separate operating instructions ; Seat heating 108 = Seat ventilation 108 ? Level control 183 A Selects the drive program 158 B Indicator lamp 42 (USA on.
Overhead control panel Function Page : p To switch the right- hand reading lamp on/off 120 ; | To switch the automatic interior lighting control on/off 121 = u To switch the rear interior lighting on/.
Door control panel Function Page : Opens the door 81 ; %& Locks/unlocks the vehicle 81 = 7 Adjusts the exterior mirrors 112 ? Zª Selects the exterior mirror, electrically folds the exterior mirro.
34 BA 251 USA, CA Edition A 2011; 1; 3, en-US d2sboike Version: 3.0.3.5 2010-04-16T14:31:55+02:00 - Seite 34.
Vehicle equipment .............................. 36 Occupant safety .................................. 36 Children in the vehicle ........................ 59 Panic alarm .......................................... 66 Driving safety systems ............
Vehicle equipment i This manual describes all the standard and optional equipment of your vehicle which was available at the time of purchase. Country-specific differences are possible. Bear in mind that your vehicle may not feature all functions described here.
G Warning The SRS self-check has detected a malfunction if the + SRS warning lamp: R does not illuminate R goes out approximately 4 seconds after the engine is started R illuminates after the engine i.
R Never place your feet on the instrument panel, dashboard, or on the seat. Always keep both feet on the floor in front of the seat. R Improper repair work on the SRS creates a risk of rendering the SRS inoperative or causing unintended air bag deployment.
increase the risk and potential severity of hand/arm injury when the driver front air bag inflates. R Adjust the front-passenger seat as far back as possible from the dashboard when the seat is occupied.
The front air bags increase protection for the driver's and front passenger's head and chest. Driver's air bag : deploys in front of the steering wheel; front-passenger air bag ; deploys in front of and above the glove box.
doors must therefore only be performed by qualified technicians. Contact an authorized Mercedes-Benz Center. G Warning! Only use seat covers which have been tested and approved by Mercedes-Benz for your vehicle model. Using other seat covers may interfere with or prevent the deployment of the side impact air bags.
Window curtain air bags : are deployed: R on the side on which an impact occurs R at the start of an accident with a high rate of lateral vehicle deceleration or acceleration, e.
G Warning If the 42 indicator lamp illuminates when an adult or someone larger than a small individual is in the front- passenger seat, have the front passenger reposition himself or herself in the seat until the 42 indicator lamp goes out, or check whether objects are caught under or around the seat.
the seat belt and Top Tether strap, or lower anchors and Top Tether strap, fully in accordance with the child seat manufacturer's instructions. Occupants, especially children, should always sit a.
If the key has been removed from the ignition lock or is in position 0 , indicator lamp 42 : does not light up. G Warning If the red + SRS warning lamp in the instrument cluster and the 42 indicator lamp are lit at the same time, there is a malfunction in the OCS.
If necessary, adjust the tilt of the passenger seat backrest. An incorrectly mounted child seat could cause injuries to the child in case of an accident, instead of increasing protection for the child. Follow the manufacturer's instructions for installation of child restraint systems.
Problems with the occupant classification system Problem Possible causes/consequences and M Solutions USA only: The 42 indicator lamp illuminates and remains illuminated when the weight of a typical a.
G Warning If the 42 indicator lamp does not illuminate or remains out with the weight of a typical 12-month-old child in a standard child restraint or less, or is unoccupied, on the front- passenger seat, do not transport a child on the front-passenger seat until the system has been repaired.
indicator lamp while driving to make sure that the 42 indicator lamp is illuminated. If the 42 indicator lamp goes out or remains out, you may only carry a child on the front-passenger seat once the system has been repaired.
System self-test The 42 indicator lamp illuminates when you: R turn the SmartKey to position 1 or 2 in the ignition lock R on vehicles with KEYLESS-GO, press the Start-Stop button once or twice The 42 indicator lamp goes out again after approximately six seconds.
Problems with the air bag deactivation system Problem Possible causes/consequences and M Solutions The 42 indicator lamp illuminates and remains illuminated. A special BabySmart™ compatible child restraint system is installed on the front-passenger seat.
PRE-SAFE ® takes the following measures depending on the hazardous situation detected: R the front seat belts are pre-tensioned. R on vehicles with memory functions: the front-passenger seat is adjusted if it is in an unfavorable position under accident conditions.
Resetting triggered NECK-PRO head restraints Important safety guidelines G Warning For reasons of safety, have the NECK-PRO head restraints/NECK-PRO luxury head restraints checked at an authorized Mercedes-Benz Center after a rear-end collision.
Seat belts Important safety guidelines The use of seat belts, infant or child restraints is required by law in all 50 states, the District of Columbia, the U.S. territories and all Canadian provinces. Even where this is not the case, all vehicle occupants should have their seat belts fastened when the vehicle is in motion.
curtain air bags for the side windows), Emergency Tensioning Devices, seat belt force limiters, and front seat knee bolsters. The system is designed to enhance the protection offered to properly belte.
A child's risk of serious or fatal injuries is significantly increased if the child restraints are not properly secured in the vehicle and/ or the child is not properly secured in the child restraint.
on and off in the on-board computer ( Y page 209). Seat belt outlet height adjustment You can adjust the seat belt height on the driver's seat and the front-passenger seat. Adjust the belt to a height that allows the upper part of the seat belt to be routed across the center of your shoulder.
or R the vehicle is stationary and a door is open i For more information on the 7 seat belt warning lamp, see "Indicator and warning lamps in the instrument cluster, seat belt" ( Y page 237).
Children in the vehicle Important safety guidelines G Warning When leaving the vehicle, always remove the SmartKey from the ignition lock. Always take the SmartKey with you and lock the vehicle. Do not leave children unattended in the vehicle, even if they are secured in a child restraint system, or with access to an unlocked vehicle.
Please read the warning labels affixed to the interior of the vehicle or to the infant restraint or child restraint system. G Warning Accident statistics show that children secured in the rear seats are safer than children secured in the front-passenger seat.
may only carry a child on the front- passenger seat once the system has been repaired. A child in a rear-facing child restraint on the front-passenger seat will be seriously injured or even killed if the front-passenger front air bag inflates.
LATCH-type child restraint (ISOFIX) in the rear G Warning Observe "Important safety instructions" ( Y page 59). G Warning Children that are too large for a child restraint must travel in seats using normal seat belts. Position shoulder belt across the chest and shoulder, not face or neck.
? Securing rings for the third row of seats X Install the ISOFIX child restraint system. Comply with the manufacturer's instructions when installing the ISOFIX child restraint system. Top Tether TopTether anchorage G Warning Observe "Important safety instructions" ( Y page 59).
Make sure that: R TopTether hook = is engaged in TopTether anchorage ; , as illustrated R TopTether belt ? is not twisted R TopTether belt ? is routed between the seat backrest and the cargo compartme.
X Pull release loop : in the direction of the arrow. X Fold seat backrest ; forward in the direction of seat cushion = until TopTether anchorage ? is accessible. X Route Top Tether belt B under the head restraint between both head restraint bars. X Engage TopTether hook A of TopTether belt B , into TopTether anchorage ? .
Child-proof locks Child-proof locks for the rear doors G Warning Observe "Important safety instructions" ( Y page 59). G Warning Children could open a rear door from inside the vehicle. This could result in serious injuries or an accident. Therefore, when children ride in the rear always secure the rear doors with the child-proof locks.
or X Press the KEYLESS-GO Start-Stop button. The KEYLESS-GO key must be in the vehicle. i USA only: This device complies with the part 15 of the FCC regulations. Operation is subject to the following two conditions: 1. This device may not cause interference, and 2.
G Warning! Do not pump the brake pedal. Use firm, steady brake pedal pressure instead. Pumping the brake pedal reduces the braking effect. ABS regulates brake pressure in such a way that the wheels do not lock when you brake. This allows you to continue steering the vehicle when braking.
G Warning Never switch off the ESP ® when you see the d warning lamp flashing in the instrument cluster. In this case proceed as follows: R When driving off, apply as little throttle as possible. R While driving, ease up on the accelerator pedal. R Adapt your speed and driving style to the prevailing road conditions.
X To deactivate: press button : . The d warning lamp in the instrument cluster lights up. G Warning When the d ESP ® warning lamp is illuminated continuously, the ESP ® is switched off or is not operational due to a malfunction. Vehicle stability in standard driving maneuvers is reduced.
The · distance warning lamp in the instrument cluster will light up. R you are approaching the vehicle in front rapidly. An intermittent warning tone will then sound and the · distance warning lamp in the instrument cluster will light up.
X To arm: lock the vehicle with the SmartKey or KEYLESS-GO. The turn signal lamps flash three times to indicate that the vehicle is locked. Indicator lamp : flashes to indicate that the alarm system is armed. i If the turn signal lamps do not flash three times, a door or the tailgate may not be properly closed.
Vehicle equipment .............................. 74 SmartKey ............................................. 74 Doors .................................................... 80 Tailgate ................................................ 82 Side windows .....
Vehicle equipment i This manual describes all the standard and optional equipment of your vehicle which was available at the time of purchase. Country-specific differences are possible. Bear in mind that your vehicle may not feature all functions described here.
When it is dark, the surround lighting also comes on if it is activated in the on-board computer. i Only for USA: This equipment complies with Part 15 of the FCC regulations. Operation is subject to the following conditions: R this equipment must not emit harmful, electromagnetic radiation.
This may impair the functioning of KEYLESS- GO. R To open or close the vehicle, the KEYLESS- GO key should be no more than 3 ft (1 m) from the door or tailgate. R When the vehicle is parked for more than 72 hours, the KEYLESS-GO function is deactivated.
If you pull on the handle of the tailgate, only the cargo area of the vehicle is unlocked. i If the vehicle has been parked for a long time, you must pull the door handle to activate the KEYLESS-GO functions.
G Warning! Batteries are toxic and contain caustic substances. For this reason, keep batteries out of the reach of children. If a battery has been swallowed, visit a doctor immediately. G Warning SmartKey batteries contain perchlorate material, which may require special handling and regard for the environment.
Problems with the SmartKey Problem Possible causes/consequences and M Solutions You cannot lock/ unlock the vehicle using the SmartKey. The SmartKey battery is discharged or nearly discharged. X Point the tip of the SmartKey at the driver's door handle from a distance of approximately 1.
Problem Possible causes/consequences and M Solutions The engine cannot be started using the SmartKey. The on-board voltage is too low. X Switch off non-essential consumers, e.g. seat heating or interior lighting, and try to start the engine again. If this does not work: X Check the starter battery and charge it if necessary ( Y page 308).
Unlocking and opening doors from the inside You can open a door from inside the vehicle even if it has been locked, unless the child- proof locks have been activated ( Y page 66).
Unlocking the driver's door (mechanical key) If the vehicle can no longer be unlocked centrally with the key or KEYLESS-GO: X Take the mechanical key out of the key ( Y page 77). X Insert the mechanical key into the lock of the driver's door as far as it will go.
even if the SmartKey is removed from the starter switch or removed from the vehicle, such as seat adjustment, steering wheel adjustment, or the memory function If children open a door, they could injure other persons or get out of the vehicle and injure themselves or be injured by following traffic.
X Pull the tailgate down using one of recesses : . X Push the tailgate closed from outside the vehicle. X Lock the vehicle if necessary with the & button on the key or with KEYLESS-GO ( Y page 75).
If the tailgate touches an object while closing, the closing procedure is interrupted and the tailgate reopens. i Only with KEYLESS-GO: if you leave a KEYLESS-GO key in the cargo compartment, the tailgate will not lock. The tailgate is not closed unless a KEYLESS-GO key is detected.
have status 0 ): Press button F on the SmartKey. X To open: pull remote operating switch : for the tailgate until the tailgate opens. X To close: turn the SmartKey to position 1 or 2 in the ignition lock. X Press remote operating switch for tailgate : until the tailgate is closed.
If children open a door, they could injure other persons or get out of the vehicle and injure themselves or be injured by following traffic. Do not expose the child restraint system to direct sunlight. The child restraint system's metal parts, for example, could become very hot, and the child could be burned by these parts.
override switch for the side windows is activated. X Turn the key to position 2 in the ignition lock. i You can continue to operate the side windows after you switch off the engine. This function remains active for five minutes or until one of the front doors is opened.
Convenience opening You can ventilate the vehicle before you start driving. To do this, you can use the key to simultaneously: R open the side windows R open the hinged side windows R open the tilt/sl.
Using KEYLESS-GO The SmartKey with KEYLESS-GO must be outside the vehicle but no more than 3 ft (1 m) away from a door. X Close all the doors. X Keep locking button : on the door handle pressed until the side windows and the tilt/ sliding sunroof or panorama roof with power tilt/sliding panel are fully closed.
Sliding sunroof Important safety guidelines G Warning! When leaving the vehicle, always remove the SmartKey from the starter switch. Always take the SmartKey with you and lock the vehicle. Do not leave children unattended in the vehicle, even if they are secured in a child restraint system, or with access to an unlocked vehicle.
The tilt/sliding panel operates differently when the roof panel switch is pressed and held. See the relevant section in this chapter for details. The opening/closing procedure of the tilt/ sliding pan.
Resetting Reset the tilt/sliding sunroof if it does not open smoothly, or if the battery has been disconnected or has become discharged. ! Contact a qualified specialist workshop if the tilt/sliding sunroof cannot be closed fully or reset. X Remove the SmartKey from the ignition lock or turn to position 0 (KEYLESS-GO).
panorama roof with power tilt/sliding panel is closed. G Warning! When extending the roller sunblinds, make sure no one is in danger of being injured by the extending procedure. The extending of the roller sunblinds can be immediately halted by releasing the switch.
G Warning! You could be severely or even fatally injured when closing the sliding sunroof with increased closing force or if the anti- entrapment feature is deactivated.
96 BA 251 USA, CA Edition A 2011; 1; 3, en-US d2sboike Version: 3.0.3.5 2010-04-16T14:31:55+02:00 - Seite 96.
Vehicle equipment .............................. 98 Correct driver's seat position ............ 98 Seats .................................................... 99 Steering wheel .................................. 109 Mirrors .......................
Vehicle equipment i This manual describes all the standard and optional equipment of your vehicle which was available at the time of purchase. Country-specific differences are possible. Bear in mind that your vehicle may not feature all functions described here.
Seats Important safety guidelines G Warning In order to avoid possible loss of vehicle control, all seat, head restraint, steering wheel and rear view mirror adjustments, as well as fastening of seat belts, must be done before setting the vehicle in motion.
Do not drive the vehicle without the seat head restraints. Head restraints are intended to help reduce injuries during an accident. ! To avoid damage to the seats and the seat heating, observe the following information: R do not spill any liquids on the seats.
Adjusting the head restraints Adjusting the head restraints manually Adjusting the head restraint height 9 ! The head restraints may only be removed in a qualified specialist workshop. Mercedes-Benz recommends that you go to an authorized Mercedes-Benz Center.
hand side bolster : into the desired position. X To adjust the angle of the head restraint: push or pull the head restraint in the direction of arrow ; . Rear seat head restraints G Warning! For your protection, drive only with properly positioned head restraints.
the head restraints in the 3rd row of seats in the same way. Removing the head restraints from the outer seats in the 2nd row of seats X To remove: pull the head restraint up to the stop. X Press release catch : and pull the head restraint out of the guides.
Setting the seat fore-and-aft position (outer seats in the 2nd row) X Pull lever : in the direction of the arrow to the pressure point and hold it in this position. X Slide the seat forwards or backwards to the desired position. X Release lever : . The seat engages audibly.
would apply force at the abdomen or neck. That could cause serious or even fatal injuries. Do not fold the second-row middle seat and allow occupants to use the folded second-row middle seat as a table while driving.
X Pull release handle : in the direction of the arrow to the pressure point and hold it in this position. The backrest folds forwards. X Slide the seat in the second row of seats forwards to the stop.
Seat unlocked When the seat is unlocked, lock verification indicator : is folded out and indicator area ; is clearly visible. X To lock the seat: fold back the backrest until you hear it engage. Seat locked When the seat is locked, lock verification indicator : is folded in and indicator area ; is barely visible.
Switching the seat heating on/off Switching on/off G Warning! Repeatedly setting the seat heating to level 3 may result in excessive seat temperatures. The health of passengers that have limited temperature sensitivity or a limited ability to react to excessively high temperatures may be affected or they may even suffer burn-like injuries.
X Make sure that the key is in position 2 in the ignition lock. X To switch on: press button : repeatedly until the desired ventilation level is set. i You can open the side windows and the tilt/sliding sunroof with the key ( Y page 89). The seat ventilation of the driver's seat automatically switches to the highest level.
Adjusting the steering wheel electrically : To adjust the steering wheel position (fore-and-aft adjustment) ; To adjust the steering wheel height i Related topics: R EASY-ENTRY/EXIT feature ( Y page 110) R storing settings ( Y page 114) Steering wheel heating Switching on/off The steering-wheel heating heats the leather areas of the steering wheel.
To stop steering wheel movement do one of the following: R Move steering wheel adjustment stalk. R Press one of the memory position buttons. R Press memory button M . Do not leave children unattended in the vehicle, or with access to an unlocked vehicle.
Exterior mirrors Adjusting the exterior mirrors G Warning Exercise care when using the passenger-side exterior rear view mirror. The mirror surface is convex (outwardly curved surface for a wider field of view). Objects in mirror are closer than they appear.
R the exterior mirrors fold in automatically as soon as you lock the vehicle from the outside. R the exterior mirrors fold out again automatically as soon as you unlock the vehicle and then open the driver's or front- passenger door. i The mirrors do not fold out if they have been folded in manually.
Calling up a stored parking position setting X With the key in position 2 in the ignition lock and the exterior mirror on the front- passenger side activated, engage reverse gear. The exterior mirror on the front-passenger side moves to the stored parking position.
Vehicle equipment ............................ 116 Exterior lighting ................................ 116 Interior lighting ................................. 120 Changing bulbs ................................. 121 Windshield wipers ..................
Vehicle equipment i This manual describes all the standard and optional equipment of your vehicle which was available at the time of purchase. Country-specific differences are possible. Bear in mind that your vehicle may not feature all functions described here.
X Turn the light switch to $ or à . or X If the rear fog lamp is switched on: press the light switch in to the stop. Low-beam headlamps X To switch on the low-beam headlamps: turn the key in the ignition lock to position 2 or start the engine. X Turn the light switch to L .
X To switch on automatic headlamp mode: turn the light switch to à . SmartKey in position 1 in the ignition lock: the parking lamps are switched on or off automatically depending on the brightness of the ambient light.
Combination switch Turn signals : High-beam headlamps ; Right turn signal = High beam flasher ? Left turn signal X To indicate briefly: press the combination switch briefly to the pressure point in the direction of arrow ; or ? . The corresponding turn signal flashes three times.
operated ten times while the lights are on and the engine is running ( Y page 126). When you switch off the ignition, the automatic headlamp cleaning system is reset and counting is resumed from 0. Headlamps fogged up on the inside The headlamps may fog up on the inside if there is high atmospheric humidity.
Rear overhead control panel (second row of seats) : To switch the reading lamp on/off Rear overhead control panel (3rd row of seats) : p To switch the left-hand reading lamp on/off ; p To switch the right-hand reading lamp on/off Automatic interior lighting control X To switch on/off: press the | button.
when you start the engine. For this to be observed, the lights must be switched on before starting the engine. G Warning! Xenon bulbs carry a high voltage. You could get an electric shock and be seriously or even fatally injured if you touch the electric contacts on Xenon bulbs.
Bi-xenon headlamps : Turn signal lamp: WY 5 W ; Parking lamp/standing lamp: W 5 W Tail lamp : Backup lamp: W 16 W License plate lamp : License plate lamp: C 5 W Changing the front bulbs Removing/installing the cover in the front wheel arch You must remove the cover from the front wheel housing before you can change the front bulbs.
X Take the bulb out of bulb holder ; . X Insert the new bulb into bulb holder ; . X Insert bulb holder ; into the lamp and turn it clockwise. X Align housing cover : and turn it clockwise until it engages. X Replace the cover in the front wheel arch ( Y page 123).
X Insert the new bulb into bulb holder : and turn it clockwise while applying slight pressure. X Insert bulb holder : into the lamp and turn it clockwise.
License plate lamp X Switch off the lights. X Open the tailgate. X Remove screws : . X Remove the license plate lamp. X Replace the bulb. X Insert the license plate lamp. X Replace and tighten screws : . Windshield wipers Important safety guidelines G Warning! Wiper blades are components that are subject to wear and tear.
sensitive than in the Ä position, causing the windshield wiper to wipe more frequently. Intermittent wiping is interrupted when you stop the vehicle and open a front door. This prevents a person from being splashed inadvertently when getting into or out of the vehicle.
specialist workshop, e.g. at an authorized Mercedes-Benz Center. Replacing the windshield wiper blades Removing the wiper blades X Remove the SmartKey from the ignition lock. X Fold the wiper arm away from the windshield. X Press both release clips ; .
Installing the wiper blades X Place the new wiper blade ; onto wiper arm : . X Hold wiper arm : and press wiper blade ; in the direction of the arrow until it engages. X Make sure that wiper blade ; is seated correctly. X Position wiper blade ; parallel to wiper arm : .
130 BA 251 USA, CA Edition A 2011; 1; 3, en-US d2sboike Version: 3.0.3.5 2010-04-16T14:31:55+02:00 - Seite 130.
Vehicle equipment ............................ 132 Overview of climate control sys- tems ................................................... 132 Operating climate control systems . 138 Setting the air vents ......................... 144 131 Climate control BA 251 USA, CA Edition A 2011; 1; 3, en-US d2sboike Version: 3.
Vehicle equipment i This manual describes all the standard and optional equipment of your vehicle which was available at the time of purchase. Country-specific differences are possible. Bear in mind that your vehicle may not feature all functions described here.
Control panel for the dual-zone automatic climate control Function i Notes/tips : Sets the temperature, left Set the temperature to 72 ‡ (22 †). ; Sets climate control to automatic Activate climate control using the à and Á buttons. The indicator lamps in the à and Á buttons light up.
Function i Notes/tips I Switches the rear window heating on/off J Activates/deactivates air- recirculation mode Only use "air-recirculation" mode briefly, e.g. if there are unpleasant outside odors or when in a tunnel. The windows could otherwise fog up as, in air- recirculation mode, no fresh air is drawn into the vehicle.
Function i Notes/tips = Defrosts the windshield Only use the "defrosting" function briefly until the windshield is clear again. ? Increases the airflow A Directs the airflow through the defroster vents B Switches cooling with air dehumidification on/off Activate climate control using the à and Á buttons.
Function i Notes/tips N Sets the temperature Set the temperature to 72 ‡ (22 †). O Sets the rear-compartment climate control to automatic P Directs the airflow through the rear air vents Q Directs.
Function i Notes/tips ? Defrosts the windshield Only use the "defrosting" function briefly until the windshield is clear again. A Increases the airflow B Switches the rear window heating on/.
Function i Notes/tips O Interior temperature sensor P Switches the MONO function on/off Use the MONO function if you want to adopt the temperature, air distribution and airflow settings from the driver's side for all climate control zones. The indicator lamp in the º button lights up.
Activating/deactivating the rear- compartment climate control using the front control panel (dual-zone automatic climate control) X Turn the key to position 2 in the ignition lock. X To activate/deactivate: press the ± button ( Y page 133). The indicator lamp in the ± button lights up or goes out.
Activating/deactivating ! If the cooling with air dehumidification does not switch on, it is possible that the climate control system has lost coolant. Have the cooling with air dehumidification checked at a qualified specialist workshop. X To switch on: press the Á button.
set. Automatic air distribution remains activated. or X Press one of the M or O buttons. Automatic air distribution is deactivated. Air distribution is controlled according to the position set.
Setting the air distribution Multi-zone automatic climate control: you can set the air distribution individually for the driver's and front-passenger sides.
dehumidification function remains on. Air- recirculation mode remains deactivated. or X Press the ^ button. or X Press the à button. or X Turn the temperature control clockwise or counter-clockwise.
X Turn the SmartKey to position 2 in the ignition lock. X To activate: press the d button. The indicator lamp in the d button lights up. i Air-recirculation mode is activated automatically at high outside temperatures. When air-recirculation mode is activated automatically, the indicator lamp in the d button is not lit.
In order to ensure the direct flow of fresh air through the air vents into the vehicle interior, please observe the following notes: R keep the air inlet grille on the hood free of blockages, such as ice, snow or leaves R never cover the vents or air inlet and outlet grilles in the vehicle interior.
Setting the rear-compartment side air vents : B-pillar air vent ; Thumbwheel for B-pillar air vent X To open/close: turn thumbwheel ; to the left or right. Side air vents in the rear compartment (3rd row of seats) : Defroster vent ; B-pillar air vent = Thumbwheel for B-pillar air vent X To open/close: turn thumbwheel = up or down.
Vehicle equipment ............................ 148 Notes on breaking-in a new vehicle 148 Driving ............................................... 148 Automatic transmission ................... 155 Refueling ............................................
Vehicle equipment i This manual describes all the standard and optional equipment of your vehicle which was available at the time of purchase. Country-specific differences are possible. Bear in mind that your vehicle may not feature all functions described here.
SmartKey positions SmartKey g To remove the SmartKey 1 Power supply for some consumers, such as the windshield wipers 2 Ignition (power supply for all consumers) and drive position 3 To start the engine As soon as the ignition is switched on, all the indicator lamps in the instrument cluster light up.
i When you insert Start/Stop button : into ignition lock ; , the system requires a detection time of two seconds before you can use Start/Stop button : .
( Y page 149) and release it as soon as the engine is running. i You can start the engine without preglow if the engine is warm. Using KEYLESS-GO to start the engine G Warning! As long as the SmartKey is in your vehicle, the vehicle can be started.
catalytic converter to reach its operating temperature more quickly. Hill start assist Hill start assist helps you when pulling away forwards or in reverse on an uphill gradient. It holds the vehicle for a short time after you have removed your foot from the brake pedal.
If you have started the engine with the Start/ Stop button and it cannot be switched off as described: X remove the Start/Stop button from the ignition lock. X insert the SmartKey into the ignition lock. The engine stops. The ignition lock is in position 0 .
Problems with the engine Problem Possible causes/consequences and M Solutions The engine does not start. The starter motor can be heard. R There is a malfunction in the engine electronics. R There is a malfunction in the fuel supply. X Turn the SmartKey back to position 0 in the ignition lock before the next attempt to start with the SmartKey.
Problem Possible causes/consequences and M Solutions Vehicles with a gasoline engine: The engine is not running smoothly and is misfiring. There is a malfunction in the engine electronics or a mechanical component of the engine management system. X Only depress the accelerator pedal slightly.
Engaging park position P X Push the DIRECT SELECT lever in the direction of the arrow P . i Vehicles with a production date as of 18 January 2010: if you open the driver's door when the vehicle is stationary or if the speed is very low, the automatic transmission shifts to park position P automatically.
Transmission positions B Park position Do not shift the transmission into position P unless the vehicle is stationary. The parking lock should not be used as a brake when parking. In addition to engaging the parking lock, you must always apply the parking brake to secure the vehicle.
transmission into park position P . Otherwise the vehicle could roll away which could result in an accident and/or serious personal injury. Trailer towing X When towing a trailer and driving downhill, shift to a lower gear if the automatic transmission constantly shifts between two gears.
Driving situations = You can use the engine's braking effect. 5 To use the braking effect of the engine on downhill gradients and for driving: R on steep mountain roads R in mountainous terrain R.
Problems with the transmission Problem Possible causes/consequences and M Solutions The acceleration ability is deteriorating. The transmission no longer changes gear. The transmission is in emergency mode. It is only possible to shift into 2nd gear and reverse gear.
G Warning! Do not fill diesel tanks with gasoline. Do not mix diesel fuel with gasoline. Otherwise the fuel system and engine could be damaged. In addition, the vehicle could catch fire. ! Do not use gasoline to refuel vehicles with a diesel engine. Do not use diesel to refuel vehicles with a gasoline engine.
Refueling Fuel filler flap The fuel filler flap is unlocked or locked automatically when you open or close the vehicle with the SmartKey or using KEYLESS- GO. The position of the fuel filler flap is to the rear on the right. The position of the fuel filler cap is displayed in the instrument cluster 8 .
X Pull emergency release : in the direction of the arrow. The fuel filler flap is unlocked. X Open the fuel filler flap. Refueling 163 Driving and parking BA 251 USA, CA Edition A 2011; 1; 3, en-US d2sboike Version: 3.
Problems with the fuel and fuel tank Problem Possible causes/consequences and M Solutions Fuel is leaking from the vehicle. G Risk of explosion or fire The fuel line or fuel tank is defective. X Turn the SmartKey to position 0 ( Y page 149) in the ignition lock immediately and remove it.
AdBlue ® Important notes on use BlueTEC exhaust gas aftertreatment 24 must be operated with AdBlue ® reducing agent in order to function properly. Adding AdBlue ® is one of the tasks performed during maintenance. Under normal operating conditions, a tank of AdBlue ® lasts until the next service due date.
! AdBlue ® is not a additive and must not be added to the diesel tank. If AdBlue ® is added to the diesel tank this could damage the engine. i If you are adding between maintenance intervals, add approximately 1 gallon (3.8 l) of AdBlue ® to the AdBlue ® tank.
X Insert AdBlue ® cap : as shown and turn it clockwise as far as it will go. X Stow wheel bolt wrench ; and ratchet ring spanner = again. X Fold the load compartment floor down. X Close the tailgate. X Drive at a speed above 10 mph (16 km/h). The Check Additive – See Operator's Manual disappears after approximately one minute.
X To apply: depress parking brake ; firmly. When the engine is running, the $ (USA only) or J (Canada only) indicator lamp lights up in the instrument cluster.
Service Booklet or indicated by the service interval indicator. Fuel consumption is also increased by driving in cold weather, in stop-and-go traffic, on short trips and in mountainous areas. Drinking and driving G Warning Drinking and driving and/or taking drugs and driving are very dangerous combinations.
Brakes Important safety guidelines G Warning On slippery road surfaces, never downshift in order to obtain braking action. This could result in drive wheel slip and reduced vehicle control. Your vehicle's ABS will not prevent this type of loss of control.
too low. Observe additional warning messages in the multifunction display. The brake fluid level may be too low due to brake pad wear or leaking brake lines. Have the brake system checked immediately. This work should be carried out at an authorized Mercedes-Benz Center.
For this reason, in the event of heavy rain or in conditions in which hydroplaning can occur you must drive in the following manner: R Lower your speed R Avoid ruts R Brake carefully Driving on flooded roads ! Do not drive through flooded areas. Check the depth of any water before driving through it.
G Warning Make sure that you do not endanger other road users when you apply the brakes. Driving abroad An extensive Mercedes-Benz Service network is also available in other countries. The Service Hotline's current telephone numbers for use when you are abroad are to be found in the "Service24h" section of the Service Booklet.
= To deactivate cruise control ? To store the current speed or to call up the last stored speed When you activate cruise control, the stored speed is shown in the status indicator of the multifunction display: R Canada only: e.
Setting in 5 mph (Canada: 10 km/h) increments X Briefly press the cruise control lever beyond the pressure point, up : for a higher speed or down ; for a lower speed. The last speed stored is increased or reduced. Deactivating cruise control There are several ways to deactivate cruise control: X Briefly press the cruise control lever forwards = .
If there is no vehicle in front, DISTRONIC operates in the same way as cruise control in the speed range between 20 mph (30 km/h) and 120 mph (200 km/h). If there is a vehicle in front, DISTRONIC operates in the speed range between 0 mph (0 km/h) and 120 mph (200 km/h).
Switch off the Distronic R when changing from the left to the right lane if vehicles are moving more slowly in the left lane R when entering a turn lane or highway off ramp R in complex driving situations, such as in highway construction zones In these situations, the Distronic will continue to maintain the set speed unless deactivated.
i If you do not fully release the accelerator pedal, the DISTRONIC Override message appears in the multifunction display. The set distance to a slower-moving vehicle in front will then not be maintained. You will be driving at the speed you determine by the position of the accelerator pedal.
Setting in 5 mph (Canada: 10 km/h) increments X Briefly press the cruise control lever beyond the pressure point, up : for a higher speed or down ; for a lower speed.
If DISTRONIC detects a vehicle in front, segments ; between the speed of the vehicle in front : and stored speed = light up. G Warning! An intermittent warning sounds and the distance warning lamp · .
Deactivating DISTRONIC There are a number of ways to deactivate DISTRONIC: X Briefly press the cruise control lever forwards : . or X Brake. i The last speed stored remains stored until you switch off the engine. i DISTRONIC is not deactivated if you depress the accelerator pedal.
The ability of DISTRONIC to detect vehicles when cornering is limited. Your vehicle may brake unexpectedly or late. Vehicles traveling on a different line DISTRONIC may not detect vehicles traveling on a different line. The distance to the vehicle in front will be too short.
Observe the notes on driving with a trailer ( Y page 193). AIRMATIC package General notes AIRMATIC enables a suspension tuning setting to be selected and regulates the damping behavior and level of your vehicle. The system comprises two components: ADS (Adaptive Damping System) ( Y page 183) and level control ( Y page 183) .
is opened and will continue after the door is closed again. ! When driving in very poor road conditions, select a high vehicle level in good time. Make sure that there is always sufficient ground clearance to prevent damage to the vehicle. ! Remove the key from the ignition lock before raising the vehicle completely, e.
Highway level ! Make sure that there is enough ground clearance when the vehicle is being lowered. It could otherwise hit the ground, damaging the underbody. X Make sure that the doors are closed. X Start the engine. If indicator lamp ; is lit: X Press button : .
you use winter tires (M+S tires ), with snow chains if necessary. ! When testing the parking brake, operate the vehicle only briefly (for a maximum of ten seconds) on a brake test dynamometer. When doing this, turn the key to position 0 or 1 in the ignition.
Top view Front sensors Center Approx. 40 in (100 cm) Corners Approx. 24 in (60 cm) Rear sensors Center Approx. 48 in (120 cm) Corners Approx. 32 in (80 cm) ! When parking, pay particular attention to objects above or below the sensors, such as flower pots or trailer drawbars.
From the: R sixth segment onwards, you will hear an intermittent warning tone for approximately two seconds. R seventh segment onwards, you will hear a warning tone for approximately two seconds. This indicates that you have now reached the minimum distance.
Problems with PARKTRONIC Problem Possible causes/consequences and M Solutions Only the red segments in the PARKTRONIC warning displays are lit. You also hear a warning tone for approximately two seconds. PARKTRONIC is deactivated after approximately 20 seconds and the indicator lamp in the PARKTRONIC button lights up.
G Warning! The rear view camera is only an aid and may display obstacles R from a distorted perspective R inaccurately R may not display obstacles at all The rear view camera does not relieve you of the responsibility to be cautious. Take care and pay careful attention.
Guide lines ; and = show the approximate distance from the rear of the vehicle. Yellow guide line ; indicates a distance of approximately 3 ft (1 m) and red guide line = indicates a distance of approximately 10 in (0.25 m). The distance only applies to objects at ground level.
G Warning Blind Spot Assist monitors certain areas in the immediate vicinity of your vehicle. Vehicles that approach and drive past at high speeds are not detected. There is no display and no warning. If the lanes are very wide, it may not be possible to monitor the complete width of the neighboring lane.
recognize dangers in time, cause an accident and injure yourself and others. Collision warning If a vehicle is detected in the monitoring range of Blind Spot Assist and you switch on the turn signal, a double warning tone sounds. Red warning lamp : flashes.
Make sure that you do not operate the ADS switch or the vehicle level control system when coupling/decoupling the trailer. Observe the maximum permissible trailer dimensions (width and length). Most federal states and all Canadian provinces require by law: R safety chains between the towing vehicle and the trailer.
trailer combination carefully, manually brake using the brake controller, and check the brakes for correct function. R Secure any objects on the trailer to prevent the cargo from slipping when the vehicle is in motion.
persons remaining in the vehicle do not press the switches for vehicle level control or the ADS. X Detach the trailer cable and decouple the trailer. X Detach the trailer cable and decouple the trailer.
Vehicle equipment ............................ 198 Important safety guidelines ............ 198 Displays and operation .................... 198 Menus and submenus ...................... 201 Display messages ............................. 213 Warning and indicator lamps in the instrument cluster .
Vehicle equipment i This manual describes all the standard and optional equipment of your vehicle which was available at the time of purchase. Country-specific differences are possible. Bear in mind that your vehicle may not feature all functions described here.
Speedometer with segments The segments in the speedometer indicate which speed range is available. DISTRONIC mode: One or two segments around the stored speed light up. Operating the on-board computer The on-board computer is activated as soon as you turn the SmartKey to position 1 in the ignition lock.
R open the driver's door. R press the . reset button in the instrument cluster. Values and settings as well as display messages are shown in the multifunction display.
Menus and submenus Menu overview The number of menus shown depends on the optional equipment in the vehicle. Function : Standard display menu ( Y page 202) R tire pressure loss warning system (Canada .
Function E Trip computer menu ( Y page 210) F Telephone menu ( Y page 211) Standard display menu Standard display X Press V or U on the steering wheel to select the standard display.
X Press V or U on the steering wheel to select the standard display. X Press the & or * button to select digital speedometer or the outside temperature. Digital speedometer Outside temperature Audio menu Selecting a radio station i SIRIUS XM satellite radio acts like a normal radio.
X To select the next/previous track: briefly press the & or * button. X To select a track from the track list (rapid scrolling): press and briefly hold the & or * button. The current track will not be displayed in audio AUX mode ( Aux iliary audio mode: external audio source connected).
Settings menu Introduction The Settings menu allows you to: R Restoring the factory settings R Changing the instrument cluster settings R Changing the time/date settings 29 R Changing the lighting set.
X Press the W or X button to select Km or Miles as the unit of measurement for distance. X Press the & , V or U button to select a different display. Selecting the language The Language function allows you to select the language for the instrument cluster.
X Switch off the engine. X Press V or U on the steering wheel to select the Settings menu. X Press & to call up the selection of submenus. X Press the W or X button to select the Lighting submenu. X Press & to select Daytime Running Lamps . X Press W or X to set daytime running lamps to On or Off .
X Press the W or X button to activate or deactivate the Headlamp Delayed Shut-off function. X Before switching off the engine, turn the light switch to position à . The exterior lighting delayed shut-off is activated. X Press the & , V or U button to select a different display.
2. This device must accept any interference received, including interference that may cause undesired operation of the device. Any unauthorized modification to this device could void the user’s authority to operate the equipment. X Press V or U on the steering wheel to select the Settings menu.
X Press V or U on the steering wheel to select the Settings menu. X Press & to call up the selection of submenus. X Press the W or X button to select the Comfort submenu. X Press & to select Fold In Mirrors When Locking . X Press W or X to activate/deactivate the Fold In Mirrors When Locking function.
Resetting values X Press V or U on the steering wheel to select the trip computer menu. X Press & or * to select the function that you wish to reset. X Press and hold the . reset button on the instrument cluster until the values have reverted to "0".
Rejecting or ending a call X Press the ~ button on the steering wheel. If you are not in the Telephone menu, you can still accept a call. Dialing a number from the phone book You can enter new telephone numbers into the phone book via the mobile phone (see the separate operating instructions).
Display messages Hiding display messages G Warning All categories of messages contain important information which should be taken note of and, where a malfunction is indicated, addressed as soon as possible at an authorized Mercedes-Benz Center.
Safety systems Display messages Possible causes/consequences and M Solutions ESP Unavailable See Operator's Manual G Risk of accident ESP ® (Electronic Stability Program) and therefore also PRE- SAFE ® are temporarily unavailable. The self-diagnosis function might not be complete, for example.
Display messages Possible causes/consequences and M Solutions G Tele Aid Inoperative USA only: one or more main functions in the mbrace system are malfunctioning. Canada only: one or more main functions in the Tele Aid system are malfunctioning. X USA only: have the mbrace system checked at a qualified specialist workshop.
Display messages Possible causes/consequences and M Solutions Front Passenger Airbag Enabled See Operator's Manual The front-passenger air bag is enabled during the journey, although: R there is a child, a small adult or an object weighing less than the system's weight threshold is on the front-passenger seat.
Display messages Possible causes/consequences and M Solutions X Visit a qualified specialist workshop immediately. G Warning If the 42 indicator lamp remains off even after performing the above correc.
Display messages Possible causes/consequences and M Solutions Front Passenger Airbag Disabled See Operator's Manual The front-passenger air bag is disabled during the journey even though an adult or a person larger than a certain size is occupying the front-passenger seat.
Apply the brakes. Display messages Possible causes/consequences and M Solutions ABS ABS, ESP Unavailable See Operator's Manual G Risk of accident ABS (Anti-lock Brake System) and ESP ® (Electronic Stability Program) and therefore also PRE-SAFE ® are temporarily unavailable.
Display messages Possible causes/consequences and M Solutions $ (USA only) J (Canada only) EBV, ABS, ESP Inoperative See Operator's Manual G Risk of accident EBD (Electronic Brake-force Distribution), ABS (Anti-lock Brake System), ESP ® (Electronic Stability Program) and therefore also PRE-SAFE ® are not available due to a malfunction.
Lights i Display messages about LEDs: This display message will only appear if all LEDs have failed. Display messages Possible causes/consequences and M Solutions b Low Beam Left or Low Beam Right The left or right-hand low-beam headlamp is faulty. X Check whether you are permitted to change the bulb yourself ( Y page 121).
Display messages Possible causes/consequences and M Solutions b Turn Signal Left Mirror or Turn Signal Right Mirror The turn signal in the left-hand and/or right-hand exterior mirror is faulty. X Check whether you are permitted to change the bulb yourself ( Y page 121).
Display messages Possible causes/consequences and M Solutions b Front Foglamp Left or Front Foglamp Right The left-hand or right-hand front fog lamp is faulty. The left-hand or right-hand front fog lamp is faulty. X Check whether you are permitted to change the bulb yourself ( Y page 121).
Display messages Possible causes/consequences and M Solutions b AUTO Light Inoperative The light sensor is faulty. The low-beam headlamps are switched on. X USA only: switch off daytime driving lights in the on-board computer ( Y page 206). X Switch the lights on and off using the light switch.
Display messages Possible causes/consequences and M Solutions ? Coolant Stop car, switch engine off The coolant is too hot. X Pull over and stop the vehicle safely and switch off the engine, paying attention to road and traffic conditions. X Make sure that the air supply to the radiator is not blocked, e.
Display messages Possible causes/consequences and M Solutions ? The engine fan is faulty. X At coolant temperatures under 248 ‡(120 †), drive to the next qualified specialist workshop. X Avoid subjecting the engine to heavy loads, e.g. driving in mountainous terrain, and stop-start driving.
Display messages Possible causes/consequences and M Solutions C There is only a small amount of fuel in the fuel tank. X Refuel at the nearest gas station. 8 Reserve Fuel The fuel level has fallen below the reserve range. The fuel tank must be filled up to at least the reserve fuel level; otherwise, engine running may be impaired.
Driving systems Display messages Possible causes/consequences and M Solutions ° Vehicle Rising Wait Briefly The vehicle level is too low. X Pull over and stop the vehicle safely as soon as possible, paying attention to road and traffic conditions. X Wait until the display message disappears before pulling away.
Display messages Possible causes/consequences and M Solutions Blind Spot Assist Currently Unavailable See Operator's Manual Blind Spot Assist is temporarily inoperative if: R the sensors are dirty. R its function is impaired due to heavy rain or snow.
Display messages Possible causes/consequences and M Solutions DISTRONIC Override DISTRONIC is no longer controlling the speed of the vehicle. X Take your foot off the accelerator pedal. DISTRONIC Inoperative DISTRONIC is faulty or the display has failed.
Do not underinflate tires. Underinflated tires wear excessively and/or unevenly, adversely affect handling and fuel economy, and are more likely to fail from being overheated.
Display messages Possible causes/consequences and M Solutions Check Tire(s) G Risk of accident The tire pressure in one or more tires has dropped significantly. The wheel position is displayed in the multifunction display. X Stop the vehicle without making any sudden steering or braking maneuvers.
Display messages Possible causes/consequences and M Solutions h Tire Pressure Check Tires G Risk of accident The tire pressure in one or more tires has dropped significantly. X Stop the vehicle without making any sudden steering or braking maneuvers. Pay attention to the traffic conditions as you do so.
Display messages Possible causes/consequences and M Solutions Only shift to P when vehicle is at a standstill The vehicle is moving. X Pull over and stop the vehicle safely as soon as possible, paying attention to road and traffic conditions. X Shift the transmission to position P .
SmartKey Display messages Possible causes/consequences and M Solutions + Please replace key The SmartKey needs to be replaced. X Visit a qualified specialist workshop.
Display messages Possible causes/consequences and M Solutions + Key Not Detected (white display message) The KEYLESS-GO key cannot be detected at present.
G Warning Driving with the brake warning lamp illuminated can result in an accident. Have your brake system checked immediately if the brake warning lamp stays on. Do not add brake fluid before checking the brake system. Overfilling the brake fluid reservoir can result in spilling brake fluid on hot engine parts and the brake fluid catching fire.
Problem Possible causes/consequences and M Solutions 7 The red seat belt warning lamp flashes and an intermittent audible warning sounds. G Risk of injury The driver or front passenger has not fastened their seat belt. In addition, you are driving faster than 15 mph (25 km/h ) or you have briefly driven faster than 15 mph (25 km/h).
Safety systems Problem Possible causes/consequences and M Solutions ! The yellow ABS warning lamp is lit while the engine is running. G Risk of accident ABS (Anti-lock Brake System) is deactivated due to a malfunction.
Problem Possible causes/consequences and M Solutions $ (USA only) J (Canada only) ! d The red brake warning lamp, the yellow ESP ® and ESP ® OFF warning lamps and the yellow ABS warning lamp are lit while the engine is running. A warning tone also sounds.
Problem Possible causes/consequences and M Solutions d The yellow ESP ® warning lamp is lit while the engine is running. G Risk of accident ESP ® and ESP ® trailer stabilization are deactivated. ESP ® will not stabilize the vehicle if it starts to skid or if a wheel starts to spin.
Engine Problem Possible causes/consequences and M Solutions ! (USA only) ; (Canada only) The yellow engine diagnostics warning lamp lights up while the engine is running.
Driving systems Problem Possible causes/consequences and M Solutions · The red DTR distance warning lamp lights up while the vehicle is in motion. A warning tone also sounds.
indicated on the Tire and Loading Information placard or, if available, the tire inflation pressure label, you should determine the proper tire inflation pressure for those tires.
Vehicle equipment ............................ 246 Loading guidelines ............................ 246 Stowage compartments ................... 246 Stowage areas .................................. 249 Features .........................................
Vehicle equipment i This manual describes all the standard and optional equipment of your vehicle which was available at the time of purchase. Country-specific differences are possible. Bear in mind that your vehicle may not feature all functions described here.
If so equipped, always use the cargo net when transporting cargo. The cargo net cannot secure hard or heavy objects. Parcel nets cannot secure hard or heavy objects.
Stowage compartment under the armrest The stowage compartment and the stowage tray can be opened separately. i In vehicles with the Rear Seat Entertainment System, a DVD player is installed in the stowage compartment; see the separate operating instructions.
: Stowage compartment Stowage areas Parcel nets G Warning! Vehicles with Occupant Classification System (OCS) Do not place objects with a combined weight of more than 4.4 lbs (2 kg) into the parcel net on the back of the front passenger seat. Otherwise, the OCS may not be able to properly approximate the occupant weight category.
X At the same time, reach into recess ; . X Lift center console : by recess ; upwards in the direction of the arrow to release center console : from anchoring points = . X Remove center console : from the vehicle. i Supporting base ? cannot be removed.
G Warning! Never drive a vehicle with the tailgate open. Deadly carbon monoxide (CO) gases may enter vehicle interior resulting in unconsciousness and death. To enlarge the cargo compartment, the rear bench seats of the 2nd and 3rd rows of seats can be folded forwards separately.
! Make absolutely sure that you adhere to the specified folding order when fully enlarging the cargo compartment: R fold down the center seat in the 2nd row of seats (7-seat vehicles) R fold down the outer seats in the 2nd row of seats R fold down the seats in the 3rd row of seats You could otherwise damage the seats.
i The center console in the 2nd row of seats can remain in place if it is installed in the foremost position (position1) ( Y page 249). However, the loading surface will not be level. X Remove the head restraint of the seat concerned ( Y page 102). X Lay the head restraints on the seat cushion of the corresponding seat.
i The seats in the 2nd row of seats must be in the rearmost position ( Y page 103). X Fold backrest = forwards into a horizontal position. Resetting the seats to the driving position G Warning! Make s.
X Check that the seat is correctly engaged. X Set the seat head restraint to the desired position ( Y page 102). Lock verification indicator for the outer seats in the 2nd row of seats Seat unlocked When the seat is unlocked, lock status indicator : is folded out and indicator area ; is clearly visible.
Footwell of the 2nd row of seats There is one cargo tie-down ring : in the footwell behind the driver’s seat and one in the footwell behind the front-passenger seat. Footwell of the 3rd row of seats Two cargo tie down rings : are located in the footwell of the 3rd row of seats.
X To extend: pull the cargo compartment cover back by grab handle : and clip it into retainers ; on the left and right. X To retract: unhook the cargo compartment cover from retainers ; on the left and right and guide it forwards by grab handle : until it is fully retracted.
X Hold extension ? in front of cargo compartment cover ; with guide pins : pointing directly at guides = . X Turn extension ? and cargo compartment cover ; towards each other in the direction of the arrow. Guide pins : engage in guides = . If the extensions are not required, they can be secured to the cargo compartment cover.
X Undo the two Velcro fasteners of the safety-net stowage. X Unroll and unfold the cargo net. The upper and lower guide rods must engage audibly. Attaching the safety net Cargo net attached behind the C-pillar : Retainer ; Guide rod X Insert guide rod ; into retainer : in the direction of the arrow.
and right roof rails are only stabilized by means of the basic carrier bars being mounted. Follow the manufacturer’s installation instructions. Otherwise, an improperly attached roof rack system or its load could become detached from the vehicle. Do not exceed the maximum roof load of 220 lb (100 kg).
X To remove the card holder: raise card holder ; at the rear and remove. Card holder with bottle opener Cards and car park tickets can be inserted into the slot in the center. The bottle opener is located under the card holder. It can be use to open both screw caps = and crown caps ? .
X Pull cup holder = out to the stop in the direction of the arrow. Closing the cup holder X Make sure that there is no drink container in the cup holder.
Glare from the side X Fold down sun visor : . X Pull sun visor : out of retainer = . X Swing sun visor : to the side. X Vehicles with a sliding sunroof: fold down additional sun visor ; to the windshield. Roller sunblinds for the rear side windows The roller sunblinds for the rear side windows are only available in the USA.
: Cover ; Insert X To open: open cover : ( Y page 248). X Fold cover : down in the direction of the arrow as far as it will go. X To remove the insert: press insert : in the direction of the arrow. X Pull insert : upwards and remove it. X To re-insert the insert: replace insert : into the opening from above.
insertion and removal or by sockets that do not fit correctly. A damaged socket can cause the cigarette lighter to stop working. Center console, front X Turn the key to position 2 in the ignition lock. X Open cover : ( Y page 247). X Press in cigarette lighter ; .
X Fold up the cover on socket : . i You can also use the socket when the ignition is switched off. An emergency cut- out ensures that the on-board voltage does not drop too low. If the on-board voltage is too low, the power to the sockets is automatically cut.
devices, such as games consoles, chargers and laptops, should not consume more than a maximum of 150 W altogether. Requirements for operation of these devices: R 12 V power sockets in the footwell of the second row of seats and in the stowage compartment must be functioning correctly ( Y page 265).
The mbrace system The mbrace system provides three different services: R automatic and manual emergency call R Roadside Assistance call R MB info call To control the volume during an mbrace call, proceed as follows: X Press the W or X button on the multifunction steering wheel.
Once a connection has been established, the Call Connected message appears in the multifunction display. All important information on the emergency is compiled, for example: R current location of the .
X Press and hold Roadside Assistance button : for more than two seconds. A call to a Mercedes-Benz Roadside Assistance Representative is initiated. The indicator lamp in Roadside Assistance button : flashes while the call is active. The Connecting Call message appears in the multifunction display and COMAND is muted.
X Press and hold MB info call button : for more than two seconds. A call to the Response Center is initiated. MB info call button indicator lamp : flashes while the connection is being established. The Connecting Call message appears in the multifunction display and COMAND is muted.
The system calculates the route and subsequently starts the route guidance with the address entered. i If you select No , the address can be stored in the address book. i The Destination Download function is available if the corresponding cellular phone network is available and data transfer is possible.
i Certain garage door openers are not compatible with the integrated remote control. If you experience difficulties with the programming of the integrated remote control, contact an authorized Mercede.
i To achieve the best result, insert new batteries in garage door remote control A of your garage door drive before programming. X Erase the memory of the integrated remote control ( Y page 275) before programming it for the first time. X Turn the key to position 2 in the ignition lock.
the setup has been completed successfully. X At the same time, press transmitter button B of the garage door remote control for two seconds, then release it for two seconds, then press it again for two seconds. X Repeat this sequence on transmitter button B of the garage door remote control until the frequency signal has been saved.
Compass X To call up the compass: press the V or U button on the multifunction steering wheel repeatedly until the AIRMATIC/Compass menu appears in the multifunction display. The compass indicates the direction in which the vehicle is currently driving: N , NE , E , SE , S , SW , W or NW .
Vehicle equipment ............................ 278 Engine compartment ........................ 278 Service ............................................... 282 Care .................................................... 283 277 Maintenance and care BA 251 USA, CA Edition A 2011; 1; 3, en-US d2sboike Version: 3.
Vehicle equipment i This manual describes all the standard and optional equipment of your vehicle which was available at the time of purchase. Country-specific differences are possible. Bear in mind that your vehicle may not feature all functions described here.
X Pull release lever : on the hood. The hood is released. ! Make sure that the windshield wipers are not folded away from the windshield. You could otherwise damage the windshield wipers or the hood. X Reach into the gap, pull hood catch handle ; up and lift the hood.
Checking the oil level using the oil dipstick Example: gasoline engine Example: diesel engine X Pull oil dipstick : out of the dipstick guide tube. X Wipe off oil dipstick : . X Slowly insert oil dipstick : into the dipstick guide tube to the stop, and take it out again.
Further information on engine oil ( Y page 354). X Replace cap : on the filler neck and tighten clockwise. Ensure that the cap locks into place securely. Checking and adding other service products Checking the coolant level Only check the coolant level when the vehicle is on a level surface and the engine has cooled down.
! At temperatures below freezing, always fill the washer fluid container with a mix of windshield washer concentrate and antifreeze additive. There is otherwise a risk of damaging the windshield washer system/headlamp cleaning system. ! Only use washer fluid concentrate which is suitable for plastic lenses.
The service interval display informs you of the next service due date. If a service due date has been exceeded, you also hear an acoustic signal. The multifunction display shows a service message for a few seconds, e.g. Service A In .. Miles Service A due now Service A Exceeded By .
R solvents R cleaning agents containing solvents Do not scrub. Do not touch the surfaces or protective films with hard objects, e.g. a ring or ice scraper. You could otherwise scratch or damage the surfaces and protective film. H Environmental note Dispose of empty packaging and cleaning cloths in an environmentally responsible manner.
Washing by hand Carefully remove all deposits of road salt as soon as possible when driving in winter. Also, clean the insides of the wheels when washing the underbody of the vehicle. X Do not use hot water and do not wash the vehicle in direct sunlight.
to painted surfaces. You could otherwise damage the paintwork. If water no longer forms "beads" on the painted surface, paint care products should be used that have been approved and recommended by Mercedes-Benz. This is the case approximately every three to five months, depending on climatic conditions and the care product used.
Cleaning the sensors X Clean sensors : of the driving systems with water, car shampoo and a soft cloth. ! When cleaning the sensors with a power washer, maintain a distance between the vehicle and the nozzle of the power washer of at least 11.8 in (30 cm).
parts may break away and be thrown around the interior when an air bag is deployed, which may result in severe injuries. ! Do not affix the following to plastic surfaces: R stickers R films R scented oil bottles or similar items You can otherwise damage the plastic.
Cleaning the seat belts X Use clean, luke-warm water and soap solution. ! Do not clean the seat belts using chemical cleaning agents. Do not dry the seat belts by warming them above 176 ‡ (80 †) or placing them in direct sunlight. G Warning Do not bleach or dye seat belts as this may severely weaken them.
290 BA 251 USA, CA Edition A 2011; 1; 3, en-US d2sboike Version: 3.0.3.5 2010-04-16T14:31:55+02:00 - Seite 290.
Vehicle equipment ............................ 292 After an accident .............................. 293 Where will I find...? ........................... 293 Flat tire .............................................. 296 Battery ........................
Vehicle equipment i This manual describes all the standard and optional equipment of your vehicle which was available at the time of purchase. Country-specific differences are possible. Bear in mind that your vehicle may not feature all functions described here.
After an accident Problem Possible causes/consequences and M Solutions Fuel is leaking from the vehicle. G Risk of explosion or fire The fuel line or the fuel tank is faulty. X Immediately turn the SmartKey to position 0 ( Y page 149) in the ignition lock and remove it.
Vehicle tool kit Notes The vehicle tool kit can be found in the stowage well under the cargo compartment floor. i Vehicles are not equipped with the tools needed to change a wheel when they leave the factory, e.g. jack or lug wrench. Some tools for changing a wheel are specific to the vehicle.
: Lug wrench ; Electric air pump = Instructions on the installation position of the vehicle tool kit holder ? Fuse allocation chart A Alignment bolt B Folding wheel chock C Towing eye D Wheel bolts E .
i Fully deflating the tire can take a few minutes. X Screw the valve insert back into the valve. X Screw the valve cap back on. In the spare wheel well, there are two guides : to keep the collapsible spare wheel in place. X Lay collapsible spare wheel ; in the emergency spare wheel well.
X Vehicles without KEYLESS-GO: remove the key from the ignition lock. X Vehicles with KEYLESS-GO: open the driver's door. The on-board electronics have status 0 , which is the same as the key having been removed. X Vehicles with KEYLESS-GO: remove the Start/Stop button from the ignition lock ( Y page 149).
R If TIREFIT is swallowed, immediately rinse your mouth out thoroughly with water and drink plenty of water. R Do not induce vomiting. Consult a doctor immediately. R Do not inhale TIREFIT fumes. i If TIREFIT leaks out, allow it to dry. It can then be removed like a layer of film.
X Let the electric pump run for five minutes. The tire should then have attained a pressure of at least 180 kPa (1.8 bar/ 26 psi). G Warning The air hose can become hot during inflation. Please exercise appropriate caution. ! Do not operate the electric air pump for longer than eight minutes at a time without a break.
If after five minutes a pressure of 180 kPa (1.8 bar/26 psi) has not been achieved, see ( Y page 300). Tire pressure of 180 kPa (1.8 bar/ 26 psi) is not achieved If after five minutes a pressure of 180 kPa (1.8 bar/26 psi) has not been achieved: X Press the on/off switch on the electric air pump to 0 .
TIREFIT kit version 1 X To reduce the tire pressure (version 1): open pressure release screw F on pressure gauge G . TIREFIT kit version 2 E Pressure release button F Pressure gauge X To reduce the tire pressure (version 2): press pressure release button E on the filler hose.
lug wrench, consult an authorized Mercedes-Benz Center. X Prepare the vehicle as described ( Y page 296). X If a trailer is coupled to the vehicle, uncouple it.
X On downhill gradients: place chocks or other suitable items in front of the wheels of the front and rear axle. Raising the vehicle G Warning When jacking up the vehicle, only use the jack which has been specifically approved by Mercedes-Benz for your vehicle.
X Position jack = at jacking point ; . X Make sure that the base of the jack is positioned directly under the jacking point. X Turn ratchet ring spanner ? until jack = sits completely on jacking point ; and the base of the jack lies evenly on the ground.
Do not tighten the wheel bolts when the vehicle is raised. Otherwise, the vehicle could fall off the jack. : Wheel bolts for 18", 19" and 20" wheels 2 Wheel bolts for the "Minispare" emergency spare wheel ! Always use wheel bolts ; to mount the collapsible spare wheel.
Version 2 X Version 1: open flap : . X Version 1: pull connector = and the air hose with pressure gauge ? out of the housing. X Version 2: pull connector = and the air hose out of the housing. X Version 1: make sure that the pressure release screw on pressure gauge ? is closed.
X Place the ratchet ring spanner onto the hexagon nut of the jack so that the letters AB are visible. X Turn the ratchet ring spanner until the vehicle is once again standing firmly on the ground. X Place the jack to one side. X Tighten the wheel bolts evenly in a crosswise pattern in the sequence indicated ( : to A ).
This is particularly the case when the vehicle is heavily laden. The maximum permissible distance that can be driven in run-flat mode depends to a large extent on the loads placed on the vehicle. It can be shorter due to high speeds, a heavy cargo, sudden changes in direction, the road surface condition, outside temperature, etc.
Immediately rinse acid splashes off with clean water. Consult a doctor if necessary. Wear eye protection. Keep children away. Observe this Operator's Manual. H Environmental note Do not dispose of batteries in the household rubbish. Dispose of defective batteries in an environmentally responsible manner.
i If the power supply has been interrupted, e.g. if the battery has been reconnected, you must carry out the following tasks: R set the clock ( Y page 206) On vehicles with COMAND and a navigation system, the clock is set automatically.
Jump-starting G Warning Failure to follow these directions will cause damage to the electronic components, and can lead to a battery explosion and severe injury or death. Never lean over batteries while connecting or jump starting. You might get injured.
X Shift the transmission to position P . X Switch off all electrical consumers (e.g. radio, blower etc.). X Open the hood ( Y page 278). Position number C identifies the charged battery of the other vehicle or an equivalent jump- starting device. ! Never swap the terminal connections.
Towing away Important safety guidelines G Warning With the engine not running, there is no power assistance for the brake and steering systems. In this case, it is important to keep in mind that a considerably higher degree of effort is necessary to brake and steer the vehicle.
X Take cover : off the opening. X Screw in the towing eye clockwise to the stop. X Insert the lug wrench handle into the towing eye and tighten it. or X If your vehicle is not equipped with a lug wrench, use a suitable object to tighten the towing eye.
Recovering a vehicle that has become stuck Take great care when recovering a vehicle whose drive wheels have become embedded in loose earth or mud, particularly if the vehicle is laden. When recovering the vehicle, do not use jerky movements and do not pull it at an angle.
The fuses are located in various fuse boxes: R fuse box on the front-passenger side of the dashboard R fuse box in the engine compartment on the right-hand side of the vehicle, when viewed in the dire.
Engine emergency off If the engine cannot be switched off as described, observe the following procedure: X Take the fuse allocation chart out of the vehicle tool kit ( Y page 294). X Open the fuse box in the engine compartment ( Y page 316). X Remove fuse 120.
318 BA 251 USA, CA Edition A 2011; 1; 3, en-US d2sboike Version: 3.0.3.5 2010-04-16T14:31:55+02:00 - Seite 318.
Vehicle equipment ............................ 320 Important safety guidelines ............ 320 Directives to be observed ................ 321 Maintenance and care of wheels and tires ............................................. 321 Tire pressures ..
Vehicle equipment i This manual describes all the standard and optional equipment of your vehicle which was available at the time of purchase. Country-specific differences are possible. Bear in mind that your vehicle may not feature all functions described here.
Directives to be observed R Only mount tires and wheels of the same type and make. R Only mount tires of the correct size onto the wheels. R After mounting new tires, run them in at moderate speeds for the first 60 miles (100 km) as they only reach their full performance after this distance.
Depending upon the weather and/or road surface (conditions), the tire traction varies widely. Do not use tires until they are excessively worn as the tire traction on wet road surfaces decreases significantly when the tread depth is less than 1 / 8 in (3 mm).
R check the tire for foreign bodies. R check whether the wheel is losing air or the valve is leaking. R make sure that only a valve cap approved by Mercedes-Benz is installed on the tire valve. tire pressure that is too low have a negative effect on vehicle safety, which could lead you to cause an accident.
Additional specifications of tire pressure values for loads can also be found on the tire pressure table on the inside of the fuel filler flap. The tire pressure for emergency spare wheels can be foun.
Underinflated tires can: R wear excessively and/or unevenly R adversely affect fuel economy R fail from being overheated R adversely affect handling Overinflated tires can: G Warning Follow recommended tire inflation pressures. Do not overinflate tires.
message will appear in the multifunction display. G Warning! When the multifunction display shows the message Tire Pressure Check Tires , one or more of your tires are significantly underinflated.
X Make sure that the key is in position 2 ( Y page 149) in the ignition lock. X Press and hold the V or U button on the multifunction steering wheel until the standard display appears in the multifunction display ( Y page 202).
responsibility to maintain correct tire pressure, even if underinflation has not reached the level at which the low tire pressure indicator lamp of the TPMS lights up. Your vehicle has also been equipped with a TPMS malfunction indicator to indicate when the system is not operating properly.
of the tire pressure display. The tire pressures are already being monitored. i If a spare wheel/emergency spare wheel is mounted, the system may continue to show the tire pressure of the wheel that has been removed for a few minutes.
pressures are then accepted as reference values and monitored. If you wish to cancel the restart: X Press the X button. The tire pressure values stored at the last restart will continue to be monitored. Maximum tire pressures G Warning Never exceed the maximum tire inflation pressure.
: B-pillar, driver's side Maximum permissible gross vehicle weight rating i Details that are shown as examples on the Tire and Loading Information placard are only examples. The maximum permissible gross vehicle weight rating is vehicle- specific and may differ from that which is illustrated.
Steps for determining the maximum cargo The following steps have been developed as required of all manufacturers under Title 49, Code of U.S. Federal Regulations, Part 575 pursuant to the "National Traffic and Motor Vehicle Safety Act of 1966".
Example 1 Example 2 Example 3 Weight of the occupants Occupant 1: 150 lbs (68 kg) Occupant 2: 180 lbs (82 kg) Occupant 3: 160 lbs (73 kg) Occupant 4: 140 lbs (63 kg) Occupant 5: 120 lbs (54 kg) Occupa.
Trailer load/noseweight The trailer load/noseweight affects the gross weight of the vehicle. If a trailer is attached, the trailer load/noseweight is included in the load along with occupants and luggage. The trailer load/noseweight is usually approximately 10 % - 15 % of the gross weight of the trailer and its cargo.
Quality grades can be found, where applicable, on the tire sidewall between the tread shoulder and maximum tire width. For example: Tread wear Traction Temperature 200 AA A All passenger car tires must conform to U.S. federal safety requirements in addition to these grades.
performance which all passenger car tires must meet under the Federal Motor Vehicle Safety Standard No. 109. Grades B and A represent higher levels of performance on the laboratory test wheel than the minimum required by law. Interchanging the wheels G Warning Rotate front and rear wheels only if the tires are of the same dimension.
Tire size designation, load-bearing capacity and speed index : Tire width ; Aspect ratio in percent = Tire code ? Rim diameter A Load bearing index B Speed index i Tire data is vehicle-specific and may deviate from the data in the example.
For further information on the load bearing index, see load index ( Y page 339). Speed index: speed index B specifies the approved maximum speed of the tire. G Warning Even when permitted by law, never operate a vehicle at speeds greater than the maximum speed rating of the tires.
have been especially developed for driving on snow. An electronic speed limiter prevents your vehicle from exceeding a speed of 130 mph (210 km/h). The speed index of tires installed at the factory may be higher than the maximum speed that the electronic speed limiter permits.
Tire type code: tire type code ? can be used by the manufacturer as a code to describe specific characteristics of the tire. Date of manufacture: date of manufacture A provides information about the age of a tire. The first and second positions represent the week of manufacture, starting with "01" for the first calendar week.
Wheel rim The part of the wheel on which the tire is mounted. GAWR (Gross Axle Weight Rating) The GAWR is the maximum gross axle weight rating. The actual load on an axle must never exceed the gross axle weight rating. The gross axle weight rating can be found on the vehicle identification plate on the B-pillar on the driver's side.
Maximum load on one tire Maximum load on one tire. This is calculated by dividing the maximum axle load of one axle by two. PSI (pounds per square inch) Standard unit of measurement for tire pressure. Aspect ratio Relationship between tire height and tire width in percent.
Distribution of the vehicle occupants Distribution of vehicle occupants over designated seat positions in a vehicle. Maximum permissible payload weight Nominal load and luggage load plus 68 kilograms (150 lb) multiplied by the number of seats in the vehicle.
as standard equipment or as an optional extra. If you want to equip your vehicle with approved winter tires, it may be necessary to obtain wheel rims in the corresponding size, as the size of the approved winter tires may differ from the standard tires.
Tires of the same dimensions i BA: Both axles R 350 R18 BA Alloy wheels Offset 8 J x 18 H2 2.64 in (67 mm) Winter tires 44 255/50 R18 105 H M+S i R 350 R 350 BlueTEC 45 R19 BA Alloy wheels Offset 8 J x 19 H2 2.
R 350 R20 BA Alloy wheels Offset 8.5 J x 20 H2 2.36 in (60 mm) AMG alloy wheels Offset 8.5 J x 20 H2 2.36 in (60 mm) All-weather tires 48 265/45 R20 108 H XL M+S Winter tires 44, 48 265/45 R20 108 H XL M+S i Spare tire i Vehicles with MOExtended tires (tires with run-flat characteristics) are not equipped with TIREFIT at the factory.
Vehicle equipment ............................ 348 Genuine Mercedes-Benz parts ......... 348 Warranty ............................................ 348 Vehicle identification plates ............ 349 Service products and capacities ..... 350 Vehicle data .
Vehicle equipment i This manual describes all the standard and optional equipment of your vehicle which was available at the time of purchase. Country-specific differences are possible. Bear in mind that your vehicle may not feature all functions described here.
Vehicle identification plates Vehicle identification plate with vehicle identification number (VIN) and paint code number X Open the driver's door.
Engine number : Emissions control information label, including the certification of both federal and Californian emissions reference values ; Engine number (stamped into the crankcase) = VIN (on the lower edge of the windshield) Service products and capacities Important safety guidelines Service products include the following: R fuels (e.
Capacities Vehicle model Capacity Fuel, coolant, lubricants etc. Engine oil and filter R 350 BlueTEC 9.0 US qt (8.5 l) Approved engine oils R 350 8.5 US qt (8.0 l) Power steering All models Approx. 1.3 US qt (1.2 l) MB Power Steering Fluid or approved Dexron III ATF Cooling system All models Approx.
Fuel Important safety notes G Warning! Fuel is highly flammable. Fire, naked flames and smoking are therefore prohibited when handling fuels. Switch off the engine and the auxiliary heating before refueling. G Warning! Gasoline and diesel fuels are highly flammable and poisonous.
! Do not fill the tank with gasoline. Do not blend diesel fuel with gasoline or kerosene. Otherwise, the fuel system and the engine will be damaged. Damage resulting from the use of gasoline or kerosene is not covered by the Mercedes-Benz Limited Warranty.
! Only use AdBlue ® that complies with ISO 22241. Do not add any special additives to AdBlue ® and do not thin AdBlue ® with water. This could destroy the BlueTEC exhaust gas aftertreatment. ! Rinse surfaces that have come into contact with AdBlue ® immediately with water or remove AdBlue ® using a damp cloth and cold water.
Otherwise, you may damage the engine and the exhaust gas aftertreatment. Mercedes-Benz recommends MOBIL OIL. The table shows which engines oil have been approved for your vehicle. Model Engine model MB Approval R 350 BlueTEC 642 229.51 R 350 272 229.5 i MB Approval is stated on the containers.
Antifreeze separately from each other, could cause engine damage not covered by the Mercedes-Benz Limited Warranty. ! Always use a suitable coolant mixture, even in countries where high temperatures prevail. Otherwise, the cooling system will not be sufficiently protected from corrosion, and the boiling point will be too low.
Anticorrosion/antifreeze Your vehicle has a number of aluminum components. The use of aluminum components in motor vehicle engines necessitates that anticorrosion/antifreeze coolant used in such engines be specifically formulated to protect the aluminum parts.
Vehicle weight, R 350 BlueTEC Maximum roof load Maximum 220 lb (100 kg) Vehicle data, R 350 (251.165) The data quoted here refers specifically to a vehicle with standard equipment. Contact an authorized Mercedes-Benz Center for the data for all vehicle variants and trim levels.
359 BA 251 USA, CA Edition A 2011; 1; 3, en-US d2sboike Version: 3.0.3.5 2010-04-16T14:31:55+02:00 - Seite 359.
360 BA 251 USA, CA Edition A 2011; 1; 3, en-US d2sboike Version: 3.0.3.5 2010-04-16T14:31:55+02:00 - Seite 360.
Publication details Internet Further information about Mercedes-Benz vehicles and about Daimler AG can be found on the following websites: http://www.mbusa.
Order no. 6515 1839 13 Part no. 251 584 40 82 Edition A 2011 É2515844082fËÍ 2515844082 BA 251 USA, CA Edition A 2011; 1; 3, en-US d2sboike Version: 3.
Ein wichtiger Punkt beim Kauf des Geräts Mercedes-Benz 2011 R350 Crossover (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Mercedes-Benz 2011 R350 Crossover noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Mercedes-Benz 2011 R350 Crossover - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Mercedes-Benz 2011 R350 Crossover reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Mercedes-Benz 2011 R350 Crossover erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Mercedes-Benz 2011 R350 Crossover besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Mercedes-Benz 2011 R350 Crossover verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Mercedes-Benz 2011 R350 Crossover. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Mercedes-Benz 2011 R350 Crossover gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
