Benutzeranleitung / Produktwartung 2011 E63 AMG des Produzenten Mercedes-Benz
Zur Seite of 344
E-Class Coupe and Cabriolet Operator's Manual BA 207 USA, CA Edition B 2011; 1; 3, en-US d2sboike Version: 3.0.3.6 2010-05-20T10:38:09+02:00 - Seite 1.
Symbols Registered trademarks: R Bluetooth ® is a registered trademark of the Bluetooth SIG Inc. R PRE-SAFE ® is a registered trademark of Daimler AG. R HomeLink ® is a registered trademark of Prince, a Johnson Controls Company. R SIRIUS and related brands are registered trademarks of SIRIUS XM Radio Inc.
Welcome to the world of Mercedes-Benz Before you drive off, please familiarize yourself with your vehicle and read this manual, especially the safety and warning notices. This will help you to obtain the maximum pleasure from your vehicle and to avoid endangering yourself and others.
BA 207 USA, CA Edition B 2011; 1; 3, en-US d2sboike Version: 3.0.3.6 2010-05-20T10:38:09+02:00 - Seite 2.
Index ....................................................... 4 Introduction ......................................... 18 At a glance ........................................... 23 Safety ................................................... 33 Opening and closing .
1, 2, 3 ... 12 V socket ........................................ 258 A ABS (Anti-lock Braking System) Display message ............................ 220 Function/notes ................................ 64 Warning lamp ................................. 243 Accident (notes) .
Pulling away ................................... 153 Releasing the parking lock manually ........................................ 162 Selector lever ................................ 156 Starting .......................................... 153 B Backrest Folding forward/back .
CD player/CD changer (on-board computer) .......................................... 205 Center console ..................................... 29 Central locking Automatic locking (on-board computer) ...................................... 210 SmartKey .
D Dashboard see Cockp it Daytime running lamps Display message ............................ 225 Switching on/off (on-board computer) ...................................... 209 Delayed switch-off Exterior lighting (on-board computer) ..................
Dynamic handling package with sports mode ....................................... 183 E EASY-ENTRY feature ......................... 113 Activating/deactivating (on- board computer) ............................ 211 EASY-EXIT feature ..................
Premium-grade unleaded gasoline . 336 Refueling ........................................ 162 Specifications ................................ 336 Troubleshooting ............................. 165 Fuel consumption Current (on-board computer) ......... 202 Notes .
K Key Opening/closing soft top ................. 91 KEYLESS-GO Button ............................................ 151 Convenience closing feature ............ 88 Display message ............................ 239 Locking ...............................
Memory card (on-board computer) . 205 Memory function ............................... 116 Menu (on-board computer) Assistance ..................................... 206 Audio ............................................. 204 DISTRONIC PLUS ............
Panorama roof with power tilt/ sliding panel Opening/closing ............................ 102 Resetting ....................................... 103 Parking ............................................... 165 Parking aid Parking Guidance ..............
Reporting Malfunctions relevant to safety ........ 21 Reserve fuel Display message ............................ 229 Warning lamp ................................. 245 Residual heat Switching on/off ........................... 144 Restraint systems see SRS Reversing lamp (display message) .
Refrigerant (air-conditioning system) .......................................... 337 Washer fluid ................................... 339 Settings Factory (on-board computer) ......... 212 On-board computer ....................... 208 Shift ranges ...
Stowage well Trunk floor (under) ......................... 254 Submenu (on-board computer) Convenience .................................. 211 Factory setting ............................... 212 Instrument cluster ......................... 208 Lights .
GVWR (Gross Vehicle Weight Rating) (definition) ......................... 325 Increased vehicle weight due to optional equipment (definition) ...... 324 Kilopascal (kPa) (definition) ........... 325 Labeling (overview) ........................ 320 Load bearing index (definition) .
Individual settings (on-board computer) ...................................... 208 Loading .......................................... 314 Lowering ........................................ 292 Maintenance .................................... 19 Parking up .
Product information We recommend using genuine Mercedes- Benz parts as well as conversion parts and accessories explicitly approved by us for your vehicle model. We have tested these parts to determine their reliability, safety and special suitability for Mercedes-Benz vehicles.
Information for customers in California Under California law you may be entitled to a replacement of your vehicle or a refund of the purchase price or lease price, if after a reasonable number of repa.
If you sell your Mercedes, please leave all literature with the vehicle to make it available to the next operator. If you bought this vehicle used, be sure to send in the "Notice of Purchase of U.
Proper use of the vehicle To ensure proper use of the vehicle, you must familiarize yourself with the following information and rules: R safety notes in this Operator's Manual R technical data in.
Limited Warranty ! Follow the instructions in this manual about the proper operation of your vehicle as well as about possible vehicle damage. Damage to your vehicle that arises from culpable contraventions against these instructions are not covered either by Mercedes-Benz Limited Warranty or by the New or Used-Vehicle Warranty of Daimler AG.
Exterior view ....................................... 24 Cockpit ................................................. 25 Instrument cluster .............................. 26 Multifunction steering wheel ............. 28 Center console ...................
Exterior view Function Page : Trunk lid Vehicle tool kit 287 ; Rear window defroster 144 = Lights 126 ? Soft top (Cabriolet) 89 A Fuel filler flap 162 B Defrosting the windshield 142 Cleaning the wind.
Cockpit i Illustration: Coupe Function Page : Steering wheel paddle shifters 159 ; Cruise control lever 172 = Instrument cluster 26 ? Horn A PARKTRONIC warning display 186 B Overhead control panel 31 .
Instrument cluster Overview Function Page : Fuel gauge ; Speedometer 199 = Segments 199 ? Multifunction display 200 A Coolant temperature gauge 198 Function Page B Tachometer 199 C Clock D Brightness .
Warning and indicator lamps Function Page : ESP ® OFF 243 ; Fog lamp 122 = Rear fog lamp 122 ? Turn signal 122 A ESP ® 243 B Distance warning lamp 247 C Turn signal 122 D Seat belt 241 E SRS 244 Fun.
Multifunction steering wheel Function Page : Multifunction display 200 ; COMAND; see the separate operating instructions = ~6 Makes/accepts or rejects/ ends a call 205 WX Adjusts the volume 8 Mute ? ?.
Center console Coupe Function Page : Hazard warning lamps 124 ; ATA indicator lamp 71 = 45 indicator lamp 42 ? Moves the seat-belt extender forwards 54 A COMAND, see the separate operating instruction.
Cabriolet Function Page : Hazard warning lamps 124 ; ATA indicator lamp 71 = 45 indicator lamp 42 ? Moves the seat-belt extender forwards 54 A COMAND, see the separate operating instructions B Seat he.
Overhead control panel Function Page : u To switch the rear interior lighting on/off 126 ; | To switch the automatic interior lighting control on/off 125 = p To switch the right- hand reading lamp on/.
Door control panel Function Page : r 45= Stores settings for the seat, exterior mirrors and steering wheel 116 ; Adjusts the seat electrically 108 = %& Locks/unlocks the vehicle 81 ? Opens the doo.
Vehicle equipment .............................. 34 Occupant safety .................................. 34 Children in the vehicle ........................ 58 Panic alarm .......................................... 63 Driving safety systems ............
Vehicle equipment i This manual describes all the standard and optional equipment of your vehicle which was available at the time of purchase. Country-specific differences are possible. Bear in mind that your vehicle may not feature all functions described here.
G Warning The SRS self-check has detected a malfunction if the 6 SRS warning lamp: R does not come on at all R fails to go out approximately 4 seconds after the engine was started R comes on after the.
R Improper repair work on the SRS creates a risk of rendering the SRS inoperative or causing unintended air bag deployment. Work on the SRS must therefore only be performed by qualified technicians.
R Adjust the front-passenger seat as far back as possible from the dashboard when the seat is occupied. R Occupants, especially children, should never place their bodies or lean their heads in the area of the door where the side impact air bag (Coupe) or the side impact air bag and the head bag (Cabriolet) inflate.
The front air bags increase protection for the driver's and front-passenger's head and chest. Driver's air bag : deploys in front of the steering wheel; front-passenger air bag ; deploys in front of and above the glove box.
Driver's knee bag : increases protection for the driver against the risk of: R knee injuries R thigh injuries R lower leg injuries Driver's knee bag : inflates beneath the steering column.
lateral direction and determines that side impact air bag deployment can offer additional protection to that provided by the seat belt. Side air bags : will not deploy in side impacts with deceleration rates which do not exceed the system's preset deployment thresholds for vehicle deceleration or acceleration.
G Warning Only use seat covers which have been tested and approved by Mercedes-Benz for your vehicle model. Using seat covers or other seat coverings can cause a malfunction of the side impact air bags and/or the pelvis air bags. Contact an authorized Mercedes-Benz Center for availability.
R independently of seat belt use R independently of the front air bags Window curtain air bags : will not deploy in impacts with deceleration rates which do not exceed the system’s preset deployment thresholds for vehicle deceleration or acceleration.
started. Depending on occupant weight sensor readings from the seat, it will then remain illuminated or go out. With the 45 indicator lamp illuminated, the front passenger front air bag is deactivated. With the 45 indicator lamp out, the front passenger front air bag is activated.
indicating that the front-passenger front air bag is deactivated. Should the 45 indicator lamp not illuminate or go out while the restraint is installed, please check installation. Periodically check the 45 indicator lamp while driving to make sure that the 45 indicator lamp is illuminated.
System self-test The 45 indicator lamp illuminates when you: R turn the SmartKey to position 1 or 2 in the ignition lock R on vehicles with KEYLESS-GO, press the Start/Stop button once or twice If an .
Problems with the occupant classification system Problem Possible causes/consequences and M Solutions The 45 indicator lamp illuminates and remains illuminated. The person sitting on the front-passenger seat: R weighs as much as a typical adult R weighs more than a child OCS is malfunctioning.
BabySmart™ air bag deactivation system How the air bag deactivation system functions The BabySmart™ system is standard equipment in Canada. G Warning According to accident statistics, children are safer when properly restrained on the rear seats than on the front-passenger seat.
injured or even killed if the front-passenger front air bag inflates. R If you have to place a child in a forward- facing child restraint system on the front- passenger seat, you must: - move the seat.
System self-test The 45 indicator lamp illuminates when you: R turn the SmartKey to position 1 or 2 in the ignition lock R on vehicles with KEYLESS-GO, press the Start-Stop button once or twice The 45 indicator lamp goes out again after approximately six seconds.
Problems with the air bag deactivation system Problem Possible causes/consequences and M Solutions The 45 indicator lamp illuminates and remains illuminated. A special BabySmart™ compatible child restraint system is installed on the front-passenger seat.
workshop immediately and have the roll bar checked. PRE-SAFE ® system G Warning The PRE-SAFE ® system reduces the impact of an accident on vehicle occupants, as long as their seat belts have been fastened correctly.
the NECK-PRO head restraints may not function properly, or in the event of a rear-end collision may not be able offer the level of protection they are designed to provide. G Warning Only use seat covers/head restraint covers that have been tested and approved by Mercedes-Benz for your model.
Seat belts Important safety notes The use of seat belts and infant and child restraint systems is required by law in all 50 states, the District of Columbia, the U.S. territories and all Canadian provinces. Even where this is not the case, all vehicle occupants should have their seat belts fastened when the vehicle is in motion.
bag, front-passenger front air bag, pelvis air bags, side impact air bags, Coupe: window curtain air bags for side windows, Cabriolet: head bags), Emergency Tensioning Devices (ETDs), seat belt force limiters, and front seat knee bolsters.
child. For additional information, see the "Children in the vehicle" section. A child's risk of serious or fatal injuries is significantly increased if the child restraints are not properly secured in the vehicle and/ or the child is not properly secured in the child restraint.
Example: Coupe X Adjust the seat and move the backrest to an almost vertical position ( Y page 106). X Pull the seat belt smoothly out of seat-belt extender : . X Without twisting it, guide the shoulder section of the seat belt across the middle of your shoulder and the lap section across your hips.
If the driver's seat belt is not fastened after the engine is started, an additional warning tone will sound. The warning tone goes out after approximately six seconds or once the driver's seat belt is fastened.
direction during the initial stages of the impact R in the event of a side impact, on the side opposite the impact if the vehicle decelerates or accelerates rapidly in a lateral direction R Cabriolet: in certain situations if the vehicle overturns and the system determines that it can provide additional protection.
If an infant or child is traveling in the vehicle: X Secure the child using an infant or child restraint system appropriate to the age and weight of the child. X Make sure that the infant or child is properly secured at all times while the vehicle is in motion.
R Canada only: Children 12 years old and under may ride on the front seat if a BabySmart™ compatible child restraint system is installed on the front-passenger seat.
Special seat belt retractor G Warning Observe "Important safety notes" ( Y page 58). All seat belts in the vehicle, except the driver's seat belt, are equipped with a special seat belt retractor. When activated, the special seat belt retractor ensures that the seat belt cannot slacken after being fastened.
Coupe Installation instruction : indicates the installation point of securing ring 2 . X To install the LATCH-type (ISOFIX) child restraint system in the Coupe: press the upholstery over both the slots above securing rings 2 to the side. Cabriolet Securing rings 1 are located between the seat cushion and the seat backrest.
X Hook Top Tether hook ? into Top Tether anchorage = . X Depending on the model and specifications, and according to the manufacturer's installation instructions, route Top Tether belt A on the right-hand side and left-hand side past head restraint : .
i USA only: This device complies with the part 15 of the FCC regulations. Operation is subject to the following two conditions: 1. This device may not cause interference, and 2. This device must withstand any interference received, including interference that may cause undesired operation.
G Warning Do not pump the brake pedal. Use firm, steady brake pedal pressure instead. Pumping the brake pedal defeats the purpose of the ABS and significantly reduces braking effectiveness. ABS regulates brake pressure in such a way that the wheels do not lock when you brake.
could cause an accident. Personal or fatal injury to you or others may be the result. i This equipment has been approved by the FCC as a "Vehicular Radar System". The radar sensor system is intended for use in an automotive radar system only.
the driver when pulling away on wet or slippery roads. ESP ® can also stabilize the vehicle during braking. If ESP ® intervenes, the ä warning lamp flashes in the instrument cluster. G Warning! Never switch off the ESP when you see the ESP warning lamp ä flashing in the instrument cluster.
G Warning When the å ESP OFF warning lamp lights up, ESP is switched off. When the ä ESP warning lamp and the å ESP OFF warning lamp are on continuously, ESP is not operational due to a malfunction. When ESP is switched off or not operational, the vehicle's stability during standard driving maneuvers is reduced.
Immediately brake your vehicle to increase the distance between your vehicle and the vehicle driving in front of you. The warning sound is intended as a final caution that you have not interceded with your own braking inputs to avoid a potentially dangerous situation.
G Warning Depending on the vehicle speed, PRE-SAFE ® Brake brakes your vehicle with a maximum of 13 ft/s 2 (4 m/s 2 ) before a possible hard stop. This corresponds to about 40 % of the maximum deceleration ability of your vehicle. The driver must apply the brakes additionally in order to prevent a collision.
i The immobilizer is always deactivated when you start the engine. In the event that the engine cannot be started when the starter battery is fully charged, the immobilizer may be faulty. Contact an authorized Mercedes-Benz Center or call 1-800-FOR-MERCedes (in USA) or 1-800-387-0100 (in Canada).
72 BA 207 USA, CA Edition B 2011; 1; 3, en-US d2sboike Version: 3.0.3.6 2010-05-20T10:38:09+02:00 - Seite 72.
Vehicle equipment .............................. 74 SmartKey ............................................. 74 Doors .................................................... 80 Trunk .................................................... 82 Side windows ....
Vehicle equipment i This manual describes all the standard and optional equipment of your vehicle which was available at the time of purchase. Country-specific differences are possible. Bear in mind that your vehicle may not feature all functions described here.
deactivated using the on-board computer ( Y page 210). i Only for USA: This equipment complies with Part 15 of the FCC regulations. Operation is subject to the following conditions: R this equipment must not emit harmful, electromagnetic radiation.
R To open or close the vehicle, the KEYLESS- GO key should be no more than 3 ft (1 m) from the door or trunk. R When the vehicle is parked for more than 72 hours, the KEYLESS-GO function is deactivated. Pull one of the outer door handles and turn on the ignition to reactivate the KEYLESS-GO function.
Changing the settings of the locking system You can change the settings of the locking system in such a way that only the driver's door and the fuel filler flap are unlocked.
G Warning SmartKey batteries contain perchlorate material, which may require special handling and regard for the environment. Check with your local government's disposal guidelines. California residents, see www.dtsc.ca.gov/ HazardousWaste/Perchlorate/ index.
Problems with the SmartKey Problem Possible causes/consequences and M Solutions You cannot lock/ unlock the vehicle using the SmartKey. The SmartKey battery is discharged or nearly discharged. X Point the tip of the SmartKey at the driver's door handle from a distance of approximately 1.
Problem Possible causes/consequences and M Solutions The SmartKey cannot be turned in the ignition lock. The SmartKey has been in position 0 for a considerable time. X Remove the SmartKey and re-insert it into the ignition lock. X Check the starter battery and charge it if necessary ( Y page 293).
Unlocking and opening doors from the inside You can open a door from inside the vehicle even if it has been locked. Only open the door if traffic conditions allow you to do so. If the vehicle has previously been locked with the SmartKey or with KEYLESS-GO, opening a door from the inside will trigger the anti- theft alarm system.
i When you push either of the two buttons and an audible warning signal does not sound, the relevant setting has already been selected. You can switch the automatic locking function on and off using the on-board computer ( Y page 210).
G Warning When leaving the vehicle, always remove the SmartKey from the ignition lock. Always take the SmartKey with you and lock the vehicle. Do not leave children unsupervised in the vehicle, even if they are secured in a child restraint system, and do not give them access to an unlocked vehicle.
X Pull the trunk lid down using recess : . X Lock the vehicle if necessary with the & button on the SmartKey or with KEYLESS-GO ( Y page 75). i If you leave a KEYLESS-GO key in the trunk, the trunk lid will not lock.
Unlocking the trunk (mechanical key) ! The trunk lid swings upwards when opened. Therefore, make sure that there is sufficient clearance above the trunk lid. If the trunk can no longer be unlocked with the SmartKey or KEYLESS-GO: X Take the mechanical key out of the SmartKey ( Y page 77).
metal parts, for example, could become very hot, and the child could be burned by these parts. G Warning! Do not carry heavy or hard objects in the passenger compartment or trunk unless they are firmly secured in place.
X To open: press the corresponding switch. X To close: pull the corresponding switch. i If you press the switch beyond the point of resistance, an automatic opening/ closing process is started in the corresponding direction. You can stop automatic operation by pressing again.
Vehicles with KEYLESS-GO: R Release the sensor surface on the outside door handle to stop the closing procedure. R Immediately pull on the same outside door handle and hold firmly. The windows and the panorama roof with power tilt/sliding panel will open for as long as the door handle is held but the door not opened.
If the side window opens again slightly: X Pull the corresponding switch again immediately and hold it for approximately one second. Problems with the side windows Problem: a side window cannot be closed because an object is obstructing the side window.
! The soft top swings upwards when it is opened or closed. In order to avoid damaging the soft top or other parts of the vehicle when opening or closing the soft top, observe the following: R there must be sufficient clearance above the vehicle. R the trunk partition must be closed and must not be pushed upwards by the cargo.
Opening and closing with the key Important safety notes G Risk of injury Make sure nobody can be trapped or injured by moving parts such as the soft-top linkage or soft-top compartment cover when opening or closing the soft top. If there is a risk of entrapment, immediately release the % or & button on the SmartKey.
X Insert hex-socket wrench = into valve screw ? on the hydraulic pump. X Turn valve screw ? of the hydraulic pump with hex-socket wrench = counter- clockwise a full turn. Left trim in the trunk (example) X On both sides of the trunk, tear trim A along the perforation in the direction of the arrow.
X Pull the straps between the soft-top compartment hinges and the soft-top compartment. i Do not pull the straps as long as the trunk is open. X Place straps E on the cover of the soft-top compartment. X Take the Allen key and the SmartKey out of the trunk if necessary.
G Risk of injury Do not reach between the cover halves and the hinges. You could otherwise become trapped. X Reach under the tip of soft top G in the soft-top compartment from the right-hand and left-hand sides. X Lift the soft top out of the soft-top compartment and guide it forwards in the direction of the arrow onto windshield frame H .
X With your hand flat, press down the material tensioning frame until it rests on soft-top support M of the soft-top compartment cover. G Risk of injury You could trap your hands. Do not push the soft-top compartment cover forwards in front of the soft-top support with your hands.
You can lock the soft top again if it is not locked fully. X Stop the vehicle immediately, paying attention to road and traffic conditions. X Turn the key to position 2 in the ignition lock. X Press the soft-top switch. Trunk partition General notes The trunk partition can be used to cover luggage and loads in the trunk.
AIRCAP General notes With AIRCAP, four people can travel comfortably with the soft top down. AIRCAP reduces the draft for the driver and passengers in both the front and the rear compartment in a vehicle with the soft top down. You can open or close AIRCAP either when the vehicle is stationary or when driving up to a speed of 160 km/h.
Retracting AIRCAP X Turn the key to position 2 in the ignition lock. X Open the cover on the lower center console. X Press AIRCAP button : . The two indicator lamps on the AIRCAP button go out. Wind deflector ; retracts. The head restraints on the rear bench seats and AIRCAP wind screen = move to the lowest position simultaneously.
Installing X Keeping the AIRCAP wind screen horizontal, guide it into the slot between the head restraints in the direction of the arrow with both racks straight down. X Push the AIRCAP wind screen down until the bolts are at the same height as the brackets on the head restraints.
Problems with the soft top Problem Possible causes/consequences and M Solutions The soft top will not open or close. The ignition is not switched on. X Make sure that the key is in position 2 in the ignition lock. The trunk lid is open. X Close the trunk lid ( Y page 96).
Sliding sunroof 3 Important safety notes G Warning! When leaving the vehicle, always remove the SmartKey from the starter switch. Always take the SmartKey with you and lock the vehicle. Do not leave children unattended in the vehicle, even if they are secured in a child restraint system, or with access to an unlocked vehicle.
damaged if water enters the vehicle interior. i Resonance noises can occur in addition to the usual airflow noises when the sliding sunroof is open. They are caused by minor pressure fluctuations in the vehicle interior. Change the position of the sliding sunroof or open a side window slightly to reduce or eliminate these noises.
X Turn the key to position 2 in the ignition lock. X Push or pull the 3 switch in the corresponding direction. i If you press the 3 switch beyond the point of resistance, an automatic opening/ closing process is started in the corresponding direction.
104 BA 207 USA, CA Edition B 2011; 1; 3, en-US d2sboike Version: 3.0.3.6 2010-05-20T10:38:09+02:00 - Seite 104.
Vehicle equipment ............................ 106 Correct driver's seat position .......... 106 Seats .................................................. 107 Steering wheel .................................. 113 Mirrors ..........................
Vehicle equipment i This manual describes all the standard and optional equipment of your vehicle which was available at the time of purchase. Country-specific differences are possible. Bear in mind that your vehicle may not feature all functions described here.
Seats Important safety notes G Warning In order to avoid possible loss of vehicle control, all seat, head restraint, steering wheel and rear view mirror adjustments, as well as fastening of seat belts, must be done before setting the vehicle in motion.
Do not drive the vehicle without the seat head restraints. Head restraints are intended to help reduce injuries during an accident. ! To avoid damage to the seats and the seat heating, observe the following information: R do not spill any liquids on the seats.
Rear seat head restraints Lowering and extending the rear seat head restraints from the front (Cabriolet) G Warning! For safety reasons, always drive with the rear head restraints in the raised position when the rear seats are occupied. Keep the area around head restraints clear of articles (e.
X Turn thumbwheel : in the direction of the front seat to lower the head restraints. Folding the front seat backrests forward/back G Warning! The seat belts provide protection only with the seat backrest locked in place. Therefore, the seat backrest must be locked in place with the vehicle in motion.
: To adjust the thigh cushion ; To adjust the backrest contour in the lumbar region = To adjust the backrest contour in the upper back region ? To adjust the side bolsters of the seat backrest X Make sure that the key is in position 2 in the ignition lock.
Problems with the seat heating The seat heating has switched itself off prematurely or cannot be switched on. The vehicle's electrical system voltage is too low because too many electrical consumers are switched on. X Switch off electrical consumers which you do not need, such as the rear window defroster or interior lighting.
X Make sure that the key is in position 2 in the ignition lock. X To activate: press button : . Three red indicator lamps in the button light up. The blower starts up after a preheating phase of seven seconds. X Press button : repeatedly until the desired heating level is set.
i The steering wheel only moves upwards if it has not already reached the upper end stop. The steering wheel is moved to the last selected position when: R the driver's door is closed, and R you insert the key into the ignition lock. or R in vehicles with KEYLESS-GO, you press the Start/Stop button once.
mirror using adjustment button = as long as the indicator lamp is lit. X Press adjustment button = up, down, to the right or to the left until the exterior mirror is set to a position which provides you with a good overview of traffic conditions.
set the exterior mirror such that the rear wheel and curb are visible. X Press memory button M ? and one of the arrows on adjustment button = within three seconds. The parking position is stored if the exterior mirror does not move. If the mirror moves out of position, repeat the steps.
i The setting procedure is interrupted as soon as you release the storage position button. Memory functions 117 Seats, steering wheel and mirrors BA 207 USA, CA Edition B 2011; 1; 3, en-US d2sboike Version: 3.
118 BA 207 USA, CA Edition B 2011; 1; 3, en-US d2sboike Version: 3.0.3.6 2010-05-20T10:38:09+02:00 - Seite 118.
Vehicle equipment ............................ 120 Exterior lighting ................................ 120 Interior lighting ................................. 125 Changing bulbs ................................. 126 Windshield wipers ..................
Vehicle equipment i This manual describes all the standard and optional equipment of your vehicle which was available at the time of purchase. Country-specific differences are possible. Bear in mind that your vehicle may not feature all functions described here.
Low-beam headlamps X To switch on the low-beam headlamps: turn the key in the ignition lock to position 2 or start the engine. X Turn the light switch to L . The L indicator lamp in the instrument cluster lights up. Daytime running lamps Daytime running lamps in Canada In Canada, the "daytime running lamps" function is required by law.
Fog lamps and rear fog lamps Front fog lamps Only vehicles with front fog lamps have the "fog lamps" function. G Warning! If you suspect that driving conditions will be foggy, turn the light switch to L before you start your journey. Otherwise, your vehicle may not be visible and you could endanger yourself and others.
The K indicator lamp in the instrument cluster lights up when the high-beam headlamps are switched on. X To switch off the high-beam headlamps: move the combination switch back to its normal position. The K indicator lamp in the instrument cluster goes out.
the headlamp range is set automatically depending on the distance between the vehicle and other road users. if you are driving at speeds above approximately 35 mph (55 km/h) and no other road users have been detected: the high-beam headlamps are switched on automatically.
The cornering light function improves the illumination of the road over a wide angle in the direction you are turning, enabling better visibility in tight bends, for example.
The interior lighting automatically switches on if you: R unlock the vehicle R open a door R remove the key from the ignition lock The interior light is activated for a short while when the key is removed from the ignition lock. You can activate this delayed switch-off using the on-board computer ( Y page 210).
Mercedes-Benz recommends that you use an authorized Mercedes-Benz Center for this purpose. In particular, work relevant to safety or on safety-related systems must be carried out at a qualified specialist workshop. If you require assistance changing bulbs, consult a qualified specialist workshop.
X Insert bulb holder ; into the lamp and turn it clockwise. X Align housing cover : and turn it clockwise until it engages. High-beam headlamp (halogen headlamp)/cornering lamp (bi-xenon headlamp) X Switch off the lights. X Open the hood. X Turn housing cover : counter-clockwise and pull it out.
X Turn the bulb counter-clockwise, applying slight pressure, and remove it from bulb holder : . X Insert the new bulb into bulb holder : and turn it clockwise. X Insert bulb holder : into the lamp and turn it clockwise. Windshield wipers Important safety notes G Warning! Wiper blades are components that are subject to wear and tear.
prevents a person from being splashed inadvertently when getting into or out of the vehicle. Intermittent wiping continues when all doors are closed and R you shift the automatic transmission to drive position D or reverse gear R or R you change the wipe setting on the combination switch.
X For safety reasons, you should remove the key from the ignition lock. or X Switch off the engine using the Start/Stop button and open the driver's door. X Remove the cause of the obstruction. X Switch the windshield wipers back on. The windshield wipers are inoperative The windshield wiper drive is malfunctioning.
132 BA 207 USA, CA Edition B 2011; 1; 3, en-US d2sboike Version: 3.0.3.6 2010-05-20T10:38:09+02:00 - Seite 132.
Vehicle equipment ............................ 134 Overview of climate control sys- tems ................................................... 134 Operating the control systems ........ 139 Setting the air vents ......................... 145 133 Climate control BA 207 USA, CA Edition B 2011; 1; 3, en-US d2sboike Version: 3.
Vehicle equipment i This manual describes all the standard and optional equipment of your vehicle which was available at the time of purchase. Country-specific differences are possible. Bear in mind that your vehicle may not feature all functions described here.
Control panel for the dual-zone automatic climate control For Canada only Function i Notes/tips : Activates/deactivates air- recirculation mode Only use "air-recirculation" mode briefly, e.g. if there are unpleasant outside odors or when in a tunnel.
Function i Notes/tips G Sets the airflow H Sets the temperature, left Set the temperature to 72 ‡ (22 †). For USA only Function i Notes/tips : Sets climate control to automatic Activate climate control using the à and ¿ buttons. The indicator lamps above the à and ¿ buttons light up.
Function i Notes/tips D Switches climate control on/ off Activate climate control using the à and ¿ buttons. The indicator lamps above the à and ¿ buttons light up.
Function i Notes/tips ; Defrosting the windshield Only use the "defrosting" function briefly until the windshield is clear again. = Switches the ZONE function on/off Use the ZONE function to adopt the temperature settings on the driver's side for the front-passenger side and the rear compartment as well.
Function i Notes/tips G Sets climate control to automatic (FOCUS/MEDIUM/ DIFFUSE) Activate climate control using the à and ¿ buttons. The indicator lamps above the à and ¿ buttons light up. You can also set the airflow and air distribution of the automatic climate control to one of three levels (FOCUS/MEDIUM/DIFFUSE).
The air inside the vehicle is cooled and dehumidified according to the temperature selected. G Warning If you switch off the cooling function, the vehicle will not be cooled when weather conditions are warm. The windows can fog up more quickly. Window fogging may impair visibility and endanger you and others.
3-zone automatic climate control: press button I ( Y page 137). The indicator lamp above the à button goes out. or X Press the airflow button. Dual-zone automatic climate control: press button G ( Y page 135). 3-zone automatic climate control: press button H ( Y page 137).
b directs the airflow through the defroster, center and side air vents 12 a directs the airflow through the footwell and defroster vents i Regardless of the air distribution setting, airflow is always directed through the side air vents. The side air vents can only be closed when the controls on the side air vents are turned downwards.
The climate control system switches to the following functions: R cooling with air dehumidification on R high airflow 13 R high temperature 13 R air distribution to the windshield and front side windows R air-recirculation mode off X To deactivate: press the ¬ button.
Rear window heating Activating/deactivating G Warning Any accumulation of snow and ice should be removed from the rear window before driving. Visibility could otherwise be impaired, endangering you and others. The rear window heating has a high current draw.
Coupe: the "residual heat" function only works optimally when the side windows and panorama roof with power tilt/sliding panel are closed. Cabriolet: the "residual heat" function only works optimally when the soft top is closed. i The blower will run at a low speed regardless of the airflow setting.
Setting the side air vents X To open/close: turn thumbwheel = up or down. i Side window defroster vent : is never completely shut, even if side air vent ; is shut. Setting the air vent in the glove box When automatic climate control is activated, the glove box can be ventilated, for instance to cool its contents.
Setting the AIRSCARF vents G Warning When operating the climate control, the air that enters the passenger compartment through the air vents can be very hot or very cold (depending on the set temperature). This could cause burns or frostbite to unprotected skin in the immediate area of the air vents.
148 BA 207 USA, CA Edition B 2011; 1; 3, en-US d2sboike Version: 3.0.3.6 2010-05-20T10:38:09+02:00 - Seite 148.
Vehicle equipment ............................ 150 Notes on breaking-in a new vehicle 150 Driving ............................................... 150 Automatic transmission ................... 156 Refueling ............................................
Vehicle equipment i This manual describes all the standard and optional equipment of your vehicle which was available at the time of purchase. Country-specific differences are possible. Bear in mind that your vehicle may not feature all functions described here.
SmartKey positions SmartKey g To remove the SmartKey (shift the transmission to position P ) 1 Power supply for some consumers, such as the windshield wipers 2 Ignition (power supply for all consumers) and drive position 3 To start the engine Once the ignition is switched on, all the indicator lamps in the instrument cluster light up.
: Start/Stop button ; Ignition lock X Insert Start/Stop button : into ignition lock ; . i When you insert Start/Stop button : into ignition lock ; , the system requires a detection time of two seconds before you can use Start/Stop button : . X Shift the transmission to position P .
Automatic transmission X Shift the transmission to position P . i The transmission position display in the multifunction display shows P . Starting procedure with the SmartKey X Turn the SmartKey to position 3 in the ignition lock ( Y page 151) and release it as soon as the engine is running.
Hill start assist Hill start assist helps you when pulling away forwards or in reverse on an uphill gradient. It holds the vehicle for a short time after you have removed your foot from the brake pedal. This gives you enough time to move your foot from the brake pedal to the accelerator pedal and depress it before the vehicle begins to roll.
Problems with the engine Problem Possible causes/consequences and M Solutions The engine does not start. The starter motor can be heard. R There is a malfunction in the engine electronics. R There is a malfunction in the fuel supply. X Turn the SmartKey back to position 0 in the ignition lock before the next attempt to start with the SmartKey.
Problem Possible causes/consequences and M Solutions The engine is not running smoothly and is misfiring. There is a malfunction in the engine electronics or a mechanical component of the engine management system. X Only depress the accelerator pedal slightly.
Transmission position display : Transmission position display The displays light up when the SmartKey is inserted in the ignition lock. The displays go out when the SmartKey is removed from the ignition lock.
A Neutral Do not shift the transmission to N while driving. The transmission could otherwise be damaged. No power is transmitted from the engine to the drive wheels. Releasing the brakes will allow you to move the vehicle freely, e.g. to push it or tow it.
Program selector button on vehicles with the dynamic handling package E Economy Comfortable, economical driving S Sport Sporty driving style M Manual Manual gearshifting i For further information on "Automatic drive program" ( Y page 159).
Shift ranges Introduction When the automatic transmission is in position D , it is possible to restrict or derestrict the shift range ( Y page 160). The shift range selected is shown in the multifunction display. The automatic transmission shifts only as far as the selected gear.
change gears using the steering wheel paddle shifters or the selector lever in manual drive program M if the transmission is in position D . The gear selected is shown in the multifunction display. X Press program selector button ( Y page 158) repeatedly until M appears in the multifunction display.
Problems with the transmission Problem Possible causes/consequences and M Solutions The acceleration ability is deteriorating. The transmission no longer changes gear. The transmission is in emergency mode. It is only possible to shift into 2nd gear and reverse gear.
G Warning Overfilling of the fuel tank may create pressure in the system which could cause a gas discharge. This could cause the gasoline to spray back out when removing the fuel pump nozzle, which could cause personal injury. ! Do not use diesel to refuel vehicles with a gasoline engine.
removed. The driver's door can be closed again. X Press the fuel filler flap in the direction of arrow : . The fuel filler flap opens slightly. X Open the fuel filler flap. X Turn the fuel filler cap counter-clockwise and remove it. X Insert the fuel filler cap into the holder bracket on the inside of filler flap ; .
Problems with the fuel and fuel tank Problem Possible causes/consequences and M Solutions Fuel is leaking from the vehicle. G Risk of explosion or fire The fuel line or the fuel tank is defective. X Turn the key to position 0 ( Y page 151) in the ignition lock immediately and remove it.
Vehicles with automatic transmission X Apply the parking brake firmly. X Shift the transmission to position P . Using the SmartKey X Turn the SmartKey to position 0 in the ignition lock and remove it. The immobilizer is activated. i The SmartKey can only be removed if the transmission is in position P .
Driving tips General driving tips Important safety notes G Warning Please do not forget that your primary responsibility is to drive the vehicle. A driver's attention to the road must always be his/her primary focus when driving.
Do not turn off the engine while the vehicle is in motion. Exhaust check G Warning Inhalation of exhaust gas is hazardous to your health. All exhaust gas contains carbon monoxide (CO), and inhaling it can cause unconsciousness and possible death. Do not run the engine in confined areas (such as a garage) which are not properly ventilated.
attention to the traffic conditions. This will warm up the brake discs, thereby drying them more quickly and protecting them against corrosion. Limited braking performance on salt treated roads G Warn.
Driving on wet roads Hydroplaning If water has accumulated to a certain depth on the road surface, there is a danger of hydroplaning occurring, even if: R you drive at low speeds R the tires have adeq.
R Only use snow chains when driving on an area completely covered by snow. Do not exceed the maximum permissible speed of 30 mph (50 km/h). Remove the snow chains as soon as possible when you are no longer driving on snow-covered roads. R Local regulations may restrict the use of snow chains.
Driving systems Cruise control Important safety notes Cruise control maintains a constant road speed for you. It brakes automatically in order to avoid exceeding the set speed. On long and steep downhill gradients, especially if the vehicle is laden, you must select shift range 1 , 2 or 3 in good time.
evens out. Cruise control maintains the stored speed on downhill gradients by automatically applying the brakes. Storing the current speed or calling up the last stored speed G Warning The set speed stored in memory should only be set again if prevailing road conditions and legal speed limits permit.
DISTRONIC PLUS Important safety notes DISTRONIC PLUS regulates the vehicle's speed and automatically helps you maintain the distance to the vehicle detected in front.
It is the driver's responsibility at all times to be attentive to the road, weather and traffic conditions. Additionally, the driver must provide the steering, braking and other driving inputs necessary to remain in control of the vehicle. High-frequency sources such as toll stations, speed measuring systems etc.
distance, which creates a danger of a collision. Immediately brake the vehicle to increase your distance to the preceding vehicle. The warning sound is intended as a final caution in which you should intercede with your own braking inputs to avoid a potentially dangerous situation.
Activating while driving When driving at speeds below 20 mph (30 km/h), you can only activate DISTRONIC PLUS if the vehicle in front has been detected and is shown in the multifunction display.
Changing lanes If you wish to change to the passing lane (in left-hand-drive vehicles, the passing lane is the left-hand lane), DISTRONIC PLUS supports you if: R you are driving above 40 mph (60 km/h).
becomes louder if you attempt to lock the vehicle. The vehicle is not locked until DISTRONIC PLUS is deactivated. i If the engine has been switched off, it cannot be started again until DISTRONIC PLUS has been deactivated.
X To increase: turn control ; in direction = . DISTRONIC PLUS then maintains a greater distance between your vehicle and the vehicle in front. X To decrease: turn control ; in direction : . DISTRONIC PLUS then maintains a shorter distance between your vehicle and the vehicle in front.
You will see the stored speed for about five seconds when you activate DISTRONIC PLUS. After this time, you will see the following in the multifunction display while DISTRONIC PLUS is activated: : DIS.
Tips for driving with DISTRONIC PLUS Important safety guidelines The following contains descriptions of certain road and traffic conditions in which you must be particularly attentive. In such situations, brake if necessary. DISTRONIC PLUS is then deactivated.
DISTRONIC PLUS has not detected the vehicle cutting in yet. The distance to this vehicle will be too short. Narrow vehicles DISTRONIC PLUS has not yet detected the vehicle in front on the edge of the road, because of its narrow width. The distance to the vehicle in front will be too short.
X Start the engine. Sports tuning The firmer setting of the suspension tuning in sports mode ensures even better contact with the road. Select this mode when employing a sporty driving style, e.g. on winding country roads. Your selection remains stored until you switch off the engine.
i If depressing the brake pedal the first time does not activate the HOLD function, wait briefly and then try again. G Warning The vehicle's brakes are applied when the HOLD function is activated. For this reason, deactivate the HOLD function if the vehicle is to be set in motion by other means (e.
PARKTRONIC Important safety notes G Warning! The PARKTRONIC is a supplemental system. It is not intended to, nor does it replace, the need for extreme care. The responsibility during parking and other critical maneuvers always remains with the driver.
the vehicle. You could damage the vehicle or the objects. Ultrasonic sources such as an automatic car wash, a truck's compressed-air brakes or a pneumatic drill could cause PARKTRONIC to malfunction. Minimum distance Center Approx. 8 in (20 cm) Corners Approx.
i PARKTRONIC is automatically activated when you turn the SmartKey to position 2 in the ignition lock. 188 Driving systems Driving and parking BA 207 USA, CA Edition B 2011; 1; 3, en-US d2sboike Version: 3.
Problems with PARKTRONIC Problem Possible causes/consequences and M Solutions Only the red segments in the PARKTRONIC warning displays are lit. You also hear a warning tone for approximately two seconds. PARKTRONIC is deactivated after approximately 20 seconds, and the indicator lamp in the PARKTRONIC button lights up.
G Warning! The system cannot detect objects located above the area that the sensors scan. These objects, e.g. protruding load, overhang, or truck tail lifts, will be ignored when computing the parking procedure. The Parking Guidance might therefore provide untimely steering instructions.
parking spaces on the front-passenger side as standard. Parking spaces on the driver's side are displayed as soon as the turn signal on the driver's side is activated. To park on the driver's side, you must leave the driver's side turn signal switched on until you have engaged reverse gear.
X To reverse into the parking space: maintain the steering wheel angle and reverse carefully. X Stop as soon as you hear an acoustic signal, at the latest when PARKTRONIC sounds the continuous warning tone. The Parking Guidance Finished message appears in the multifunction display and a tone sounds.
R the camera is exposed to a very bright white light R the immediate surroundings are illuminated with fluorescent light (the COMAND system display can flicker) R there is a sudden change in temperature, e.
between 50 mph (80 km/h) and 112 mph (180 km/h). If ATTENTION ASSIST detects fatigue or increasing lapses in concentration on the part of the driver, it suggests taking a break. G Warning! The ATTENTION ASSIST is only an aid to the driver. It might not recognize fatigue or increasing inattentiveness in time or fail to recognize them at all.
attention to a vehicle detected in the monitored area. If you switch on the corresponding turn signal before changing lane, you will also receive visual and audible collision warnings. For this purpose, Blind Spot Assist uses sensors in the rear bumper.
Due to the nature of the system: R warnings may be issued unnecessarily when driving close to crash barriers or similar solid lane borders. R warnings may be interrupted when driving alongside particularly long vehicles for a prolonged time. The two sensors for Blind Spot Assist are integrated into the sides of the rear bumper.
Vehicle equipment ............................ 198 Important safety notes .................... 198 Displays and operation .................... 198 Menus and submenus ...................... 201 Display messages ............................. 213 Warning and indicator lamps in the instrument cluster .
Vehicle equipment i This manual describes all the standard and optional equipment of your vehicle which was available at the time of purchase. Country-specific differences are possible. Bear in mind that your vehicle may not feature all functions described here.
If the coolant temperature rises above 248 ‡(120 †), do not drive any further as this could damage the engine. Tachometer The red band in the tachometer indicates the engine's overrevving range. ! Do not drive in the overrevving range, as this could damage the engine.
A =; Calls up the menu and menu bar 9: Press briefly: Selects the submenu or scrolls through lists In the Audio menu: selects a stored station, an audio track or a video scene In the Tel (telephone) m.
Menus and submenus Menu overview The number of menus shown depends on the optional equipment in the vehicle. Function : Trip menu ( Y page 202) ; Navi menu (navigation instructions) ( Y page 203) = Audio menu ( Y page 204) ? Tel menu (telephone) ( Y page 205) A DriveAssist menu (assistance) ( Y page 206) B Serv.
Trip menu Standard display X Press and hold the % button on the steering wheel until the Trip menu with odometer : and trip odometer ; is shown. Trip computer "From start" or "From rese.
Resetting values You can reset the values of the following functions: R Trip odometer R Trip computer "From start" R Trip computer "From reset" X Press = or ; on the steering wheel to select the Trip menu. X Press 9 or : to select the function that you wish to reset.
Change of direction announced with a lane recommendation Lane recommendations are only displayed if the relevant data is available on the digital map. : Road into which the change of direction leads ;.
Audio player or audio media operation Audio data from various audio devices or media can be played, depending on the equipment installed in the vehicle. X Switch on COMAND and select the audio player or medium (see the separate operating instructions).
You will see one of the following display messages in the multifunction display: R Telephone Ready or the name of the network provider: the mobile phone has found a network and is ready to receive.
X Press the = or ; button on the steering wheel to select the DriveAssist menu. X Press the 9 or : button to select Distance Display . X Press a . The DISTRONIC PLUS distance display ( Y page 180) appears in the multifunction display.
When ATTENTION ASSIST ( Y page 193) is activated, the À symbol appears in the multifunction display when the ignition is on. Activating/deactivating Blind Spot Assist You can use the Blind Spot Asst. function to activate or deactivate Blind Spot Assist ( Y page 194).
X Press the : or 9 button to select the Display Unit Speed-/Odometer. function. You will see the selected setting: km or miles . X Press the a button to save the setting.
If you activate the Locator Lighting: function, the following light up: R the parking lamps R the tail lamps R the fog lamps 18 R the low-beam headlamps 19 R the license plate lamp R the side marker lamps X Press the = or ; button on the steering wheel to select the Settings menu.
X Press the : or 9 button to select the Acoustic Lock Feedback: function. You will see the selected setting: Enabled or Disabled . X Press the a button to save the setting.
X Press the = or ; button on the steering wheel to select the Settings menu. X Press the : or 9 button to select the Convenience submenu. X Press the a button to confirm. X Press the : or 9 button to select the Belt Adjustment: function. You will see the selected setting: Enabled or Disabled .
Display messages Hiding display messages G Warning All categories of messages contain important information which should be taken note of and, where a malfunction is indicated, addressed as soon as possible at an authorized Mercedes-Benz Center.
Safety systems Display messages Possible causes/consequences and M Solutions ÷ Inoperative See Operator's Manual G Risk of accident ESP ® (Electronic Stability Program), BAS (Brake Assist), PRE-SAFE ® , the HOLD function and hill start assist are not available due to a malfunction.
Display messages Possible causes/consequences and M Solutions PRE-SAFE Function Currently Limited See Oper. Manual G Risk of accident PRE-SAFE ® Brake is temporarily inoperative if: R the DISTRONIC PLUS cover in the radiator grill is dirty. R the sensors in the bumpers are dirty.
Display messages Possible causes/consequences and M Solutions G Risk of injury Vehicles with BabySmart™ (Canada only): The sensor for automatic child seat recognition is faulty. X Visit a qualified specialist workshop. 6 SRS Malfunction Service Required G Risk of injury There is a malfunction in the SRS (Supplemental Restraint System).
For your safety, we strongly recommend that you contact an authorized Mercedes-Benz Center immediately to have the system checked. Otherwise the SRS may not be activated when needed in an accident, which could result in serious or fatal injury, or it might deploy unexpectedly and unnecessarily which could also result in injury.
Display messages Possible causes/consequences and M Solutions Front Passenger Airbag Enabled See Operator's Manual The front-passenger air bag is enabled during the journey, although: R there is a child, a small adult or an object weighing less than the system's weight threshold on the front-passenger seat.
G Warning If the 45 indicator lamp remains off even after performing the above corrective steps, do not have any children 12 years old and under and other small individuals use the front-passenger seat until the system has been repaired.
Brakes Display messages Possible causes/consequences and M Solutions $ (USA only) J (Canada only) ABS and ESC Currently Unavailable See Operator's Manual G Risk of accident ABS (Anti-lock Braking System), ESP ® (Electronic Stability Program), BAS (Brake Assist), PRE-SAFE ® , HOLD and hill start assist are temporarily unavailable.
Display messages Possible causes/consequences and M Solutions $ (USA only) J (Canada only) EBD, ABS, and ESC Inoperative See Operator's Manual G Risk of accident EBD (Electronic Brake force Distribution), ABS, ESP ® , BAS, PRE- SAFE ® , HOLD and hill start assist are unavailable due to a malfunction.
Display messages Possible causes/consequences and M Solutions $ (USA only) J (Canada only) Brake Immediately A malfunction has occurred while the HOLD function or DISTRONIC PLUS is active. A tone may also sound at regular intervals. The tone becomes louder if you attempt to lock the vehicle.
Display messages Possible causes/consequences and M Solutions b Check Left Cornering Light or Check Right Cornering Light The left or right-hand cornering light is faulty. X Check whether you are permitted to change the bulb yourself ( Y page 126). or X Visit a qualified specialist workshop.
Display messages Possible causes/consequences and M Solutions b Check Left Tail and Brake Lamps or Check Right Tail and Brake Lamps The left or right brake/tail lamp is faulty. X Check whether you are permitted to change the bulb yourself ( Y page 126).
Display messages Possible causes/consequences and M Solutions b Check Left Reverse Lamp or Check Right Reverse Lamp The left or right-hand backup lamp is faulty. X Check whether you are permitted to change the bulb yourself ( Y page 126). or X Visit a qualified specialist workshop.
Display messages Possible causes/consequences and M Solutions b Switch Off Lights The lights are still switched on when you leave the vehicle. A warning tone also sounds. X Turn the light switch to c . Adaptive Highbeam Assist Inoperative Adaptive Highbeam Assist is faulty.
Display messages Possible causes/consequences and M Solutions ? Coolant Level Low Stop Vehicle Turn Engine Off The coolant is too hot. X Pull over and stop the vehicle safely as soon as possible, paying attention to road and traffic conditions. X Make sure that the air supply to the radiator is not blocked, e.
Display messages Possible causes/consequences and M Solutions ? The engine fan is faulty. X At coolant temperatures below 248 ‡ (120 †), continue driving to the next qualified specialist workshop. X Avoid subjecting the engine to heavy loads, e.g.
Display messages Possible causes/consequences and M Solutions C There is only a small amount of fuel in the fuel tank. X Refuel at the nearest gas station. 8 Fuel Level Low The fuel level has dropped into the reserve range. X Refuel at the nearest gas station.
Display messages Possible causes/consequences and M Solutions Radar Sensors Deactivated See Operator's Manual The radar sensor system is deactivated. X Check whether or not the radar sensor system may be activated ( Y page 211). X Switch on the radar sensor system ( Y page 211).
Display messages Possible causes/consequences and M Solutions Parking Guidance Canceled Parking Guidance is deactivated, because: R the vehicle is skidding. R the sensors are dirty. R a malfunction has occurred. A warning tone also sounds. X Reactivate Parking Guidance later.
Display messages Possible causes/consequences and M Solutions DISTRONIC PLUS Currently Unavailable See Operator's Manual DISTRONIC PLUS is deactivated and is temporarily inoperative if: R the DISTRONIC PLUS cover in the radiator grill is dirty. R the sensors in the bumpers are dirty.
Display messages Possible causes/consequences and M Solutions Cruise Control Inoperative Cruise control is faulty. A warning tone also sounds. X Visit a qualified specialist workshop. Cruise Control --- mph A condition for activating cruise control has not been met.
Display messages Possible causes/consequences and M Solutions Check Tire Pressure Soon G Risk of accident The tire pressure loss warning system has detected a significant loss in pressure. A warning tone also sounds. X Stop the vehicle without making any sudden steering or braking maneuvers.
Display messages Possible causes/consequences and M Solutions Caution Tire Malfunction G Risk of accident The tire pressure in one or more tires has dropped suddenly. The wheel position is displayed in the multifunction display. X Stop the vehicle without making any sudden steering or braking maneuvers.
Display messages Possible causes/consequences and M Solutions h Check Tire Pressure G Risk of accident The tire pressure in one or more tires has dropped significantly. X Stop the vehicle without making any sudden steering or braking maneuvers. Pay attention to the traffic conditions as you do so.
Display messages Possible causes/consequences and M Solutions M G Risk of accident The hood is open. X Pull over and stop the vehicle safely as soon as possible, paying attention to road and traffic conditions. X Engage the parking brake. X Close the hood.
Display messages Possible causes/consequences and M Solutions K Convertible Top Operation Possible to 25 mph If you are driving at speeds of more than 25 mph (40 km/h), you cannot open or close the soft top. X Fully open or close the soft top ( Y page 90).
Display messages Possible causes/consequences and M Solutions + Obtain a new key The SmartKey needs to be replaced. X Visit a qualified specialist workshop. + Replace Key Battery The batteries of the KEYLESS-GO key are discharged. X Change the batteries ( Y page 77).
Display messages Possible causes/consequences and M Solutions + Key Detected in Vehicle The KEYLESS-GO key has been detected inside the vehicle during locking. X Remove the KEYLESS-GO key from the vehicle. + Remove 'Start' Button and Insert Key KEYLESS-GO is temporarily malfunctioning or is defective.
G Warning Driving with the brake warning lamp illuminated can result in an accident. Have your brake system checked immediately if the brake warning lamp stays on. Do not add brake fluid before checking the brake system. Overfilling the brake fluid reservoir can result in spilling brake fluid on hot engine parts and the brake fluid catching fire.
Problem Possible causes/consequences and M Solutions 7 The red seat belt warning lamp flashes and an intermittent audible warning sounds. G Risk of injury The driver or front passenger has not fastened their seat belt. In addition, you are driving faster than 15 mph (25 km/h ) or you have briefly driven faster than 15 mph (25 km/h).
Safety systems Problem Possible causes/consequences and M Solutions ! The yellow ABS warning lamp is lit while the engine is running. G Risk of accident ABS (Anti-lock Brake System) is deactivated due to a malfunction.
Problem Possible causes/consequences and M Solutions ä The yellow ESP ® warning lamp flashes while the vehicle is in motion. G Risk of accident ESP ® or traction control has intervened because there is a risk of skidding or at least one wheel has started to spin.
G Warning In the event a malfunction of the SRS is indicated as outlined above, the SRS may not be operational. For your safety, we strongly recommend that you contact an authorized Mercedes-Benz Center immediately to have the system checked.
Problem Possible causes/consequences and M Solutions ? The red coolant warning lamp lights up while the engine is running and the coolant temperature gauge is at the start of the scale. The temperature sensor for the coolant temperature gauge is faulty.
Stop the vehicle in a safe location away from other traffic. Turn off the engine, get out of the vehicle and do not stand near the vehicle until the engine has cooled down. ! If the coolant temperature exceeds 248 ‡(120 †) do not continue driving.
G Warning Each tire, including the spare (if provided), should be checked every other week when cold and inflated to the inflation pressure recommended by the vehicle manufacturer on the Tire and Loading Information placard on the driver's door B-pillar or, if available, the tire inflation pressure label on the inside of the fuel filler flap.
Vehicle equipment ............................ 250 Loading guidelines ............................ 250 Stowage compartments ................... 250 Stowage areas .................................. 251 Features .........................................
Vehicle equipment i This manual describes all the standard and optional equipment of your vehicle which was available at the time of purchase. Country-specific differences are possible. Bear in mind that your vehicle may not feature all functions described here.
devices; see separate COMAND operating instructions. i The glove box can be ventilated ( Y page 146). X To open: pull handle : and open glove box flap ; . X To close: fold glove box flap ; upwards until it engages. The glove box can only be locked and unlocked using the mechanical key.
braking, or sudden maneuvers, they could be thrown around inside the vehicle and cause injury to vehicle occupants. Parcel nets cannot protect transported goods in the event of an accident. Parcel nets are located in the front-passenger footwell and on the left-hand side of the trunk.
Folding the rear seat backrest back X Move the driver's or front-passenger seat forward if necessary. ! Make sure that the seat belt does not become trapped when folding the rear seat backrest back. Otherwise, it could be damaged. X Fold rear seat backrest : back until it engages.
: Bag hook Stowage well under the trunk floor The TIREFIT kit, the vehicle tool kit, etc. are located in the stowage compartment. X To open: pull handle : upwards. Example: Coupe X Coupe: hook handle : into rain trough ; . X Cabriolet: pull the trunk floor slightly towards you and then hook handle : into rain trough ; .
Fastening the roof carrier Vehicles with a steel roof Vehicles with a panorama roof with power tilt/ sliding panel X Open covers : carefully in the direction of the arrow. X Fold covers : upwards. X Only secure the roof carrier to the anchorage points under covers : .
Cabriolet (double cup holder, in line) X To open (Coupe): slide cover : forwards. X To open (Cabriolet): slide front cup holder cover ; and rear cup holder cover : in the direction of the arrows. Sun visors G Warning Do not use the vanity mirror while driving.
ignition lock or removed from the vehicle, such as seat adjustment, steering wheel adjustment, or the memory function If children open a door, they could injure other persons or get out of the vehicle and injure themselves or be injured by following traffic.
X To open: pull cover ; out by its top edge. X To remove the insert: press release button = and lift the insert up and out. X To re-insert the insert: replace insert : from above. X Press insert : into the holder until it engages. Cigarette lighter G Warning When leaving the vehicle, always remove the SmartKey from the ignition lock.
Dashboard socket X Open the glove box ( Y page 250). X Lift up the cover of socket : . An additional socket is installed in the center console on vehicles without an ashtray with cigarette lighter. X To open: slide cover : forwards until it engages. X Lift up the cover of socket ; .
service subscription to a surveillance service provider. R the battery is sufficiently charged. R the corresponding cellular phone network is available for transmitting data to the customer center.
An emergency call is dialed automatically if an air bag or Emergency Tensioning Device is triggered. i An automatically dialed mbrace emergency call cannot be canceled. An emergency call can also be dialed manually. Once the emergency call is in progress, the indicator lamp in the SOS button flashes.
Roadside Assistance call button X Press and hold Roadside Assistance button : for more than two seconds. A call to a Mercedes-Benz Roadside Assistance Representative is initiated. The indicator lamp in Roadside Assistance button : flashes while the call is active.
established. The Connecting Call message appears in the multifunction display and COMAND is muted. If a connection can be established, the Call Connected message appears in the multifunction display.
i If you select No , the address can be stored in the address book. i The Destination Download function is available if the corresponding cellular phone network is available and data transfer is possible. Search & Send "Search & Send" is a destination entry service.
enforcement authority is informed of the location of the vehicle. i If the anti-theft alarm system remains activated for longer than thirty seconds, mbrace is automatically connected to the Customer Assistance Center.
of the garage door. People could otherwise be injured by the movement of the door. Remote control in the rear-view mirror Garage door remote control A is not part of the garage door opener. i To achieve the best result, insert new batteries in garage door remote control A of your garage door drive before programming.
not be long enough for the integrated signal transmitter to pick up the signal during programming. Similar to this Canadian law, some U.S. gate operators are designed to "time-out" in the same manner.
Clearing the remote control memory X Turn the SmartKey to position 2 in the ignition lock. X Press and hold transmitter buttons ; and ? for approximately 20 seconds until indicator lamp : flashes rapidly. The memory is cleared. i You should clear the remote control memory before selling the vehicle.
a circle without impeding the remaining traffic. In order to calibrate the compass correctly, observe the following points: R calibrate the compass in the open and not in the vicinity of steel structu.
270 BA 207 USA, CA Edition B 2011; 1; 3, en-US d2sboike Version: 3.0.3.6 2010-05-20T10:38:09+02:00 - Seite 270.
Vehicle equipment ............................ 272 Engine compartment ........................ 272 Service ............................................... 276 Care .................................................... 277 271 Maintenance and care BA 207 USA, CA Edition B 2011; 1; 3, en-US d2sboike Version: 3.
Vehicle equipment i This manual describes all the standard and optional equipment of your vehicle which was available at the time of purchase. Country-specific differences are possible. Bear in mind that your vehicle may not feature all functions described here.
X Pull release lever : on the hood. The hood is released. ! Make sure that the windshield wipers are not folded away from the windshield. You could otherwise damage the windshield wipers or the hood. X Reach into the gap, pull hood catch handle ; up and lift the hood.
Adding engine oil H Environmental note When adding oil, take care not to spill any. If oil enters the soil or waterways, it is harmful to the environment. ! Only use engine oils and oil filters which have been approved for vehicles with a service system.
coolant reservoir contains hot fluid and is under pressure. R using a rag, slowly turn the cap approximately 1 / 2 turn to relieve excess pressure. If opened immediately, scalding hot fluid and steam will be blown out under pressure. R do not spill antifreeze on hot engine parts.
X Mix the windshield washer fluid in a container beforehand. X At temperatures above freezing: fill the washer fluid reservoir with a mix of water and windshield washer concentrate (e.g. MB SummerFit). X At temperatures below freezing: fill the washer fluid reservoir with a mix of water and MB SummerFit windshield washer concentrate.
Hiding the service message X Press % or a on the steering wheel. Displaying the service message X Switch on the ignition. X Press = or ; to select the Service menu on the steering wheel. X Press 9 or : to select the ASSYST PLUS submenu and press a to confirm.
carefully after washing the vehicle until the brakes have dried. G Risk of accident The vehicle is braked when the HOLD function or DISTRONIC PLUS is activated. Therefore, deactivate the HOLD function and DISTRONIC PLUS before the vehicle is washed in an automatic car wash.
Do not aim directly at any of the following: R tires R door joint R soft top (Cabriolet) R wind deflector net (Cabriolet) R electrical components R battery R connectors R lights R seals R trim elements R ventilation slots Damaged seals or electrical components can lead to leaks or failures.
R tar or stain remover R other organic solvents ! Remove bird droppings immediately as they are corrosive and, therefore, can make the soft-top fabric leak. Do not use high- pressure cleaning equipment to clean the vehicle. Do not use sharp-edged equipment to remove ice and snow.
X Press rear seat head restraints button : . The rear seat head restraints and AIRCAP wind screen rise upwards. X Clean net ; of the AIRCAP wind screen with a moist cloth together with the care and cleaning agents recommended and approved by Mercedes-Benz.
Cleaning the headlamps X Clean the plastic lamp lenses on the headlamps using a wet sponge and a mild cleaning agent, e.g. Mercedes-Benz car shampoo or cleaning cloths. ! Only use cleaning agents or cleaning cloths which are suitable for plastic headlamp lenses.
! For cleaning, do not use any of the following: R alcohol-based thinner or gasoline R abrasive cleaning agents R commercially-available household cleaning agents These may damage the display surface. Do not put pressure on the display surface when cleaning.
agents that have been tested and approved by Mercedes-Benz. You can obtain these from a qualified specialist workshop, e.g. an authorized Mercedes- Benz Center. R clean artificial leather covers with a cloth moistened with a solution containing 1% detergent (e.
Vehicle equipment ............................ 286 After an accident .............................. 287 Where will I find...? ........................... 287 Flat tire .............................................. 288 Battery ........................
Vehicle equipment i This manual describes all the standard and optional equipment of your vehicle which was available at the time of purchase. Country-specific differences are possible. Bear in mind that your vehicle may not feature all functions described here.
After an accident Problem Possible causes/consequences and M Solutions Fuel is leaking from the vehicle. G Risk of explosion or fire The fuel line or the fuel tank is faulty. X Immediately turn the SmartKey to position 0 ( Y page 151) in the ignition lock and remove it.
: Spare wheel/"Minispare" emergency spare wheel ; Vehicle tool kit tray = Stowage well The vehicle tool kit contains: R Foldable wheel chock R Fuse allocation chart R Jack R One pair of glov.
Changing a wheel and mounting the spare wheel Preparing the vehicle G Warning! The wheel and tire size of the emergency spare wheel/spare wheel may differ to that of the damaged wheel. When using an emergency spare wheel/spare wheel the handling characteristics of the vehicle may change.
Securing the vehicle on level ground (example: Coupe) X On level ground: place chocks or other suitable items under the front and rear of the wheel that is diagonally opposite the wheel you wish to change.
The jacking points for the jack are located behind the wheel housings of the front wheels and in front of the wheel housings of the rear wheels (arrows). Jacking points for the jack (example: Coupe) AMG vehicles and vehicles with AMG equipment: the vehicle has covers mounted next to the jacking points on the outer sills to protect the vehicle body.
X Screw alignment bolt : into the thread instead of the wheel bolt. X Unscrew the remaining wheel bolts fully. ! Do not place wheel bolts in sand or on a dirty surface. The bolt and wheel hub threads could otherwise be damaged when you screw them in. X Remove the wheel.
X Turn the jack back to its initial position and store it together with the rest of the vehicle tool kit in the stowage well under the trunk floor. X AMG vehicles and vehicles with AMG equipment: when a front wheel has been changed, insert the cover into the outer sill.
G Warning Failure to follow these instructions can result in severe injury or death. Never lean over batteries while connecting. You might get injured. Battery fluid contains sulfuric acid. Do not allow this fluid to come in contact with eyes, skin or clothing.
escape from the battery. Do not lean over the battery during the charging process. G Warning! Battery acid is caustic. Avoid contact with the skin, eyes or clothing. ! Only charge the installed battery with a battery charger which has been tested and approved by Mercedes-Benz.
Jump-starting G Warning Failure to follow these directions will cause damage to the electronic components, and can lead to a battery explosion and severe injury or death. Never lean over batteries while connecting or jump starting. You might get injured.
X Move the selector lever to P . X Switch off all electrical consumers (e.g. radio, blower etc.). X Open the hood ( Y page 272). Position number B identifies the charged battery of the other vehicle or an equivalent jump- starting device. ! Never swap the terminal connections.
Towing and tow-starting Important safety notes G Warning If you tow the vehicle, you must use a rigid towing bar if: R the engine will not run. R there is a malfunction in the brake system. R there is a malfunction in the power supply or the vehicle's electrical system.
The mountings for the removable towing eyes are located in the bumpers. They are at the front and at the rear, behind the covers. Example: Cabriolet X Press the mark on cover : inwards, in the direction of the arrow. X Take cover : off the opening. X Screw in and tighten the towing eye clockwise to the stop.
X Turn the SmartKey to position 2 in the ignition lock. X Shift the selector lever to N . As soon as the vehicle has been loaded: X Prevent the vehicle from rolling away by applying the parking brake. X Move the selector lever to P . X Turn the SmartKey to position 0 in the ignition lock and remove the SmartKey.
X To open: pull out cover : slightly at the bottom in the direction of arrow = . X Pull cover : outwards in the direction of arrow ; and remove it. X To close: clip in cover : on the front of the dashboard. X Fold cover : inwards until it engages. Fuse box in the engine compartment X Make sure that the windshield wipers are turned off.
X To open: raise trunk floor : ( Y page 254). X Using tabs = push back floor covering with slits ; and lift it up. 302 Fuses Roadside Assistance BA 207 USA, CA Edition B 2011; 1; 3, en-US d2sboike Version: 3.
Vehicle equipment ............................ 304 Important safety notes .................... 304 Directives to be observed ................ 305 Maintenance and care of wheels and tires ............................................. 305 Tire pressures .
Vehicle equipment i This manual describes all the standard and optional equipment of your vehicle which was available at the time of purchase. Country-specific differences are possible. Bear in mind that your vehicle may not feature all functions described here.
Directives to be observed R Only mount tires and wheels of the same type and make. R Only mount tires of the correct size onto the wheels. R After mounting new tires, run them in at moderate speeds for the first 60 miles (100 km) as they only reach their full performance after this distance.
approaches 1 / 8 in (3 mm), the adhesion properties on a wet road are sharply reduced. Depending upon the weather and/or road surface (conditions), the tire traction varies widely. Do not use tires until they are excessively worn as the tire traction on wet road surfaces decreases significantly when the tread depth is less than 1 / 8 in (3 mm).
pressure can be checked in the on-board computer. G Warning! Should the tire pressure drop repeatedly: R check the tire for foreign bodies. R check whether the wheel is losing air or the valve is leaking. R make sure that only a valve cap approved by Mercedes-Benz is installed on the tire valve.
Additional specifications of tire pressure values for loads can also be found on the tire pressure table on the inside of the fuel filler flap. The tire pressure for emergency spare wheels can be foun.
Overinflated tires can: G Warning Follow recommended tire inflation pressures. Do not overinflate tires. Overinflated tires can adversely affect handling and ride comfort, wear unevenly, increase stopping distance, and result in sudden deflation (blowout) because they are more likely to become punctured or damaged by road debris, potholes etc.
the vehicle's Tire and Loading Information placard or (where available) in the tire pressure table. Driving on a significantly underinflated tire causes the tire to overheat and can lead to tire failure. Underinflation also reduces fuel efficiency and tire tread life, and may affect the vehicle's handling and stopping ability.
If you wish to confirm the restart: X Press the a button. The Tire Pressure Now OK? message appears in the multifunction display. X Press 9 or : to select Yes . X Press the a button. The Run Flat Indicator Restarted message appears in the multifunction display.
then remain illuminated. This sequence will continue upon subsequent vehicle start-ups as long as the malfunction exists. When the malfunction indicator is lit, the system may not be able to detect or signal low tire pressure as intended.
installed is not the same as the current tire pressure for the spare wheel. TPMS warning messages If the TPMS detects a significant pressure loss on one or more tires, a warning message is shown in the multifunction display. In addition, a warning tone sounds and the tire pressure warning lamp lights up in the instrument cluster.
Do not underinflate tires. Underinflated tires wear excessively and/or unevenly, adversely affect handling and fuel economy, and are more likely to fail from being overheated.
differ from that which is illustrated. You can find the valid maximum permissible gross vehicle weight rating for your vehicle on the Tire and Loading Information placard.
Determining the maximum load The following steps have been developed as required of all manufacturers under Title 49, Code of U.S. Federal Regulations, Part 575 pursuant to the "National Traffic and Motor Vehicle Safety Act of 1966".
Example 1 Example 2 Example 3 Weight of the occupants Occupant 1: 150 lbs (68 kg) Occupant 2: 180 lbs (82 kg) Occupant 3: 160 lbs (73 kg) Occupant 4: 140 lbs (63 kg) Occupant 5: 120 lbs (54 kg) Occupa.
Trailer load/noseweight The trailer load/noseweight affects the gross weight of the vehicle. If a trailer is attached, the trailer load/noseweight is included in the load along with occupants and luggage. The trailer load/noseweight is usually approximately 10% of the gross weight of the trailer and its cargo.
Where applicable, the tire grading information can be found on the tire sidewall between the tread shoulder and maximum tire width. For example: Tread wear Traction Temperature 200 AA A All passenger car tires must conform to the statutory safety requirements in addition to these grades.
car tires must meet under Federal Motor Vehicle Safety Standard No. 109. Grades B and A represent higher levels of performance on the laboratory test wheel than the minimum required by law. Interchanging the wheels G Warning Rotate front and rear wheels only if the tires are of the same dimension.
Tire size designation, load-bearing capacity and speed index : Tire width ; Aspect ratio in percent = Tire code ? Rim diameter A Load bearing index B Speed index i Tire data is vehicle-specific and may deviate from the data in the example.
For further information on the load bearing index, see load index ( Y page 323). Speed index: speed index B specifies the approved maximum speed of the tire. G Warning Even when permitted by law, never operate a vehicle at speeds greater than the maximum speed rating of the tires.
have been especially developed for driving on snow. An electronic speed limiter prevents your vehicle from exceeding a speed of 130 mph (210 km/h). The speed index of tires installed at the factory may be higher than the maximum speed that the electronic speed limiter permits.
Tire type code: tire type code ? can be used by the manufacturer as a code to describe specific characteristics of the tire. Date of manufacture: date of manufacture A provides information about the age of a tire. The first and second positions represent the week of manufacture, starting with "01" for the first calendar week.
Wheel rim The part of the wheel on which the tire is mounted. GAWR (Gross Axle Weight Rating) The GAWR is the maximum gross axle weight rating. The actual load on an axle must never exceed the gross axle weight rating. The gross axle weight rating can be found on the vehicle identification plate on the B-pillar on the driver's side.
PSI (pounds per square inch) Standard unit of measurement for tire pressure. Aspect ratio Relationship between tire height and tire width in percent. Tire pressure Pressure inside the tire applying an outward force to every square inch of the tire's surface.
Wheel/tire combinations Points to remember G Warning Observe the "Important safety notes" ( Y page 304). ! For safety reasons, Mercedes-Benz recommends that you only use tires, wheels and accessories which have been approved by Mercedes-Benz specifically for your vehicle.
Tires of the same dimensions i BA: both axles E 350 E 350 (Sport Package) R17 BA Alloy wheels Offset 7.5 J x 17 H2 1.77 in (45 mm) Winter tires 235/45 R17 94 H M+S i E 550 E 550 (Sport Package) R18 BA Alloy wheels Offset 8.
E 350 E 550 R18 Front axle Alloy wheels Offset 8.0 J x 18 H2 1.77 in (45 mm) Summer tires 235/40 R18 91 Y All-weather tires 235/40 R18 91 H M+S Rear axle Alloy wheels Offset 8.
330 BA 207 USA, CA Edition B 2011; 1; 3, en-US d2sboike Version: 3.0.3.6 2010-05-20T10:38:09+02:00 - Seite 330.
Vehicle equipment ............................ 332 Genuine Mercedes-Benz parts ......... 332 Warranty ............................................ 332 Vehicle identification plates ............ 333 Service products and capacities ..... 334 Vehicle data .
Vehicle equipment i This manual describes all the standard and optional equipment of your vehicle which was available at the time of purchase. Country-specific differences are possible. Bear in mind that your vehicle may not feature all functions described here.
Vehicle identification plates Vehicle identification plate with vehicle identification number (VIN) and paint code number X Open the driver's door.
Engine number : Emissions control information label, including the certification of both federal and Californian emissions reference values ; Engine number (stamped into the crankcase) = VIN (on the lower edge of the windshield) Service products and capacities Important safety notes Service products include the following: R fuels (e.
Capacities Vehicle model Capacity Fuel, coolant, lubricants etc. Engine oil and filter E 350 8.5 US qt (8.0 l) Approved engine oils E 550 9.0 US qt (8.5 l) Power steering All models Approximately 0.85 US qt (0.8 l) MB power steering fluid or approved Dexron III ATF Cooling system E 350 Approximately 8.
Direct skin contact with fuels and the inhalation of fuel vapors are damaging to your health. Premium-grade unleaded gasoline ! To ensure the longevity and full performance of the engine, only premium- grade unleaded gasoline must be used.
! Do not refuel with low-grade fuel and do not use fuel additives that are not tested and approved for Mercedes-Benz vehicles. Damage or malfunctions can result that are not covered: R by the Mercedes.
! Never use refrigerant R 12 (CFC) or mineral lubricants. Otherwise, you could damage the air-conditioning system. Brake fluid G Warning! The brake fluid constantly absorbs moisture from the air; this lowers its boiling point.
The antifreeze/corrosion inhibitor concentration in the cooling system should: R be at least 50%. This will protect the cooling system against freezing down to around -35 ‡ (-37 †). R not exceed 55% (antifreeze protection down to -49 ‡ (-45 †); otherwise, heat will not be dissipated as effectively.
Vehicle data, E 550 The data quoted here refers specifically to a vehicle with standard equipment. Contact an authorized Mercedes-Benz Center for the data for all vehicle variants and trim levels. Vehicle dimensions, E 550 Vehicle length Coupe 185.0 in (4698 mm) Cabriolet 185.
Publication details Internet Further information about Mercedes-Benz vehicles and about Daimler AG can be found on the following websites: http://www.mbusa.
Order no. 6515 3727 13 Part no. 207 584 31 81 Edition B 2011 É2075843181eËÍ 2075843181 BA 207 USA, CA Edition B 2011; 1; 3, en-US d2sboike Version: 3.
Ein wichtiger Punkt beim Kauf des Geräts Mercedes-Benz 2011 E63 AMG (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Mercedes-Benz 2011 E63 AMG noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Mercedes-Benz 2011 E63 AMG - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Mercedes-Benz 2011 E63 AMG reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Mercedes-Benz 2011 E63 AMG erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Mercedes-Benz 2011 E63 AMG besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Mercedes-Benz 2011 E63 AMG verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Mercedes-Benz 2011 E63 AMG. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Mercedes-Benz 2011 E63 AMG gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
