Benutzeranleitung / Produktwartung 2010 GL350 BlueTEC des Produzenten Mercedes-Benz
Zur Seite of 380
GL Operator’s Manual X164_AKB; 5; 31, en-US d2ureepe, Version: 2.11.8.1 2009-09-11T12:30:16+02:00 - Seite 1.
Symbols Trademarks ® : R AdBlue ® is a registered trademark of the German Association of the Automotive Industry (VDA). R BabySmart TM is a trademark of Siemens Automotive Corp. R Bluetooth ® is a registered trademark of Bluetooth SIG Inc. R ESP ® and PRE-SAFE ® are registered trademarks of Daimler.
Our company and staff congratulate you on the purchase of your new Mercedes-Benz. Your selection of our product is a demonstration of your trust in our company name. Furthermore, it exemplifies your desire to own an automobile that will be as easy as possible to operate and will provide years of service.
X164_AKB; 5; 31, en-US d2ureepe, Version: 2.11.8.1 2009-09-11T12:30:16+02:00 - Seite 2.
Index ....................................................... 4 Introduction ......................................... 20 At a glance ........................................... 25 Safety and security ............................. 35 Controls in detail .
1, 2, 3 ... 115V AC Socket ................................. 213 3-zone automatic climate control see Climate control system 4-ETS (Electronic Traction System) ... 64 4MATIC see All-wheel drive (4MATIC) A ABS (Antilock Brake System) ............. 62 Indicator lamp .
Ashtrays ............................................. 211 Aspect ratio (tires) ............................ 255 Audio/DVD menu .............................. 129 Auto-dimming rear view mirrors ........ 94 Automatic central locking .......... 74, 138 Automatic headlamp mode .
Central locking Automatic ................................ 74, 138 KEYLESS-GO .................................... 71 Locking/unlocking from inside ........ 75 SmartKey ......................................... 70 Central locking/unlocking switch ....
Resume function ............................ 147 Setting current speed .................... 145 Cup holders ........................................ 209 Curb weight ....................................... 255 Customer Assistance Center (CAC) ... 23 Customer Relations Department .
Through standing water ................. 262 With Distronic ................................ 153 Driving and parking Safety notes .................................. 108 Driving off .................................. 110, 261 Driving safety systems ...
ETD (Emergency Tensioning Device) ................................................. 52 Safety guidelines ............................. 39 Express operation Power windows .............................. 105 Tilt/sliding sunroof ........................ 192 Exterior lamp switch .
Transmission position indicator ..... 116 Transmission positions .................. 116 Generator see Al ternato r Global locking/unlocking see Key, SmartKey Glove box .
Interior lighting Delayed shut-off ............................ 138 Emergency lighting ........................ 102 Front .............................................. 101 Front reading lamps ....................... 101 Rear .........................
LATCH-type child seat anchors see Children in the vehicle License plate lamps Messages in the multifunction display ........................................... 311 Replacing bulbs ............................. 330 Light alloy wheels, cleaning ........
Brake pads ..................................... 299 Coolant .......................................... 306 Cruise control ................................ 294 Differential locks ................... 123, 302 Distronic .................................
Returning ....................................... 268 Ruts ............................................... 267 Steep terrain .................................. 264 Off-road driving program .................. 158 Off-road menu .........................
R Radiator ..................................... 230, 257 Radio Selecting stations .......................... 129 Radio transmitters ............................ 272 Rain sensor see Int ermittent wiping Rear axle oil ..................................
Self-test BabySmart™ .................................... 47 OCS (Occupant Classification System) ........................................... 45 Tele Aid .......................................... 215 Service see Maintenance Service, parts .........
Capacities fuels, coolants, lubricants etc. ................................ 368 Coolant .......................................... 373 Engine oil additives ........................ 371 Engine oils ..................................... 370 Fuel requirements .
Problems under-/overinflation ...... 236 Retreads ........................................ 233 Rims and tires (technical data) ...... 365 Rotation ......................................... 249 Service life ..................................... 247 Sizes .
Modifications and alterations, Operating safety .............................. 23 Towing ........................................... 352 Unlocking/locking manually .......... 323 Vehicle configuration menu ............. 140 Vehicle dimensions see Vehicle specification Vehicle Identification Number (VIN) .
Product Information Please observe the following in your own best interest: We recommend using Genuine Mercedes- Benz Parts as well as conversion parts and accessories explicitly approved by us for your vehicle model. We have tested these parts to determine their reliability, safety and special suitability for Mercedes-Benz vehicles.
Rhode Island, and Vermont Emission Control System Warranty 1 R State Warranty Enforcement Laws (Lemon Laws) Important notice for California retail buyers and lessees of Mercedes-Benz automobiles Under.
determined by our authorized technician and tow service provider. For additional information refer to the Mercedes-Benz Roadside Assistance Program brochure (in the USA) or the Roadside Assistance section of the Service and Warranty Information Booklet (in Canada) in your vehicle literature portfolio.
Operating safety G Warning! Work improperly carried out on electronic components and associated software could cause them to cease functioning. Because the vehicle’s electronic components are interconnected, any modifications made may produce an undesired effect on other systems.
Reporting safety defects For the USA only: The following text is published as required of manufacturers under Title 49, Code of U.S. Federal Regulations, Part 575 pursuant to the “National Traffic and Motor Vehicle Safety Act of 1966”.
Exterior view ....................................... 26 Cockpit ................................................. 27 Instrument cluster .............................. 28 Multifunction steering wheel ............. 30 Center console ...................
Exterior view i This Operator’s Manual describes all features, standard or optional, potentially available for your vehicle at the time of purchase. Please be aware that your vehicle might not be equipped with all features described in this manual.
Cockpit Function Page : Cruise control lever: Cruise control 144 Distronic 147 ; Instrument cluster 28, 124 = Multifunction steering wheel 30, 125 ? Horn A Steering wheel gearshift control 118 B Gear .
Instrument cluster Function Page : # Left turn signal indicator lamp ; To dim instrument cluster illumination 124 = Reset button for: Trip odometer 125 Settings 132 ? To brighten instrument cluster il.
Function Page D Multifunction display with: Trip odometer 125 Main odometer 127 E Tachometer with: 7 Seat belt telltale 51, 317 % Preglow indicator lamp, diesel engine only 109 + Supplemental Restrain.
Multifunction steering wheel Function Page : Multifunction display 127 ; Press button ~ : to end a call 142 to reject an incoming call 142 Press button 6 : to answer a call 142 to dial 4 142 to redial.
Center console Upper part (Vehicles without enhanced off-road package) Function Page : COMAND system, see separate operating instructions ; Climate control system 172 Rear window defroster 191 = Seat .
Upper part (Vehicles with enhanced off-road package) Function Page : COMAND system, see separate operating instructions ; Climate control system 172 Rear window defroster 191 = Seat heating, front pas.
Lower part Function Page : Ashtray with storage compartment 211 Cigarette lighter 212 ; Cup holder 209 = Front armrest storage compartment 207 ? Removable card/ticket holder 209 Overhead control panel.
Function Page H Hands-free microphone for Tele Aid (emergency call system), telephone and Voice Control System, see separate operating instructions I Front left interior lamp 101 Door control panel Fu.
Vehicle equipment .............................. 36 Occupant safety .................................. 36 Panic alarm .......................................... 61 Driving safety systems ....................... 61 Anti-theft systems ..................
Vehicle equipment i This Operator’s Manual describes all features, standard or optional, potentially available for your vehicle at the time of purchase. Please be aware that your vehicle might not be equipped with all features described in this manual.
G Warning! The SRS self-check has detected a malfunction when the SRS indicator lamp + : R does not come on at all R does not go out after 4 seconds after the engine was started R comes on while driving For your safety, we strongly recommend that you contact an authorized Mercedes-Benz Center immediately to have the system checked.
you have any difficulties, please contact an authorized Mercedes-Benz Center. R Do not lean your head or chest close to the steering wheel or dashboard. R Keep hands on the outside of the steering wheel rim. Placing hands and arms inside the rim can increase the risk and potential severity of hand/arm injury when the driver front air bag inflates.
replaced and to have any malfunctioning air bags repaired. This will help to make sure the air bags will continue to provide supplemental crash protection for occupants.
Also refer them to the applicable section in the Operator’s Manual. Front air bags G Observe Safety notes, see page 37. Driver’s front air bag : and front passenger front air bag ; are designed to provide increased protection for the driver and front passenger against the risk of injuries to the head and thorax.
conjunction with a properly positioned and fastened seat belt. Side impact air bags G Observe Safety notes, see page 37. G Warning! The pressure sensors for side impact air bag control are located in the doors. Do not modify any components of the doors or door trim panels including, for example, the addition of door speakers.
Window curtain air bags G Observe Safety notes, see page 37. Window curtain air bags : are designed to provide increased protection for the head but not the chest or arms.
G Warning! If the 42 indicator lamp illuminates when an adult or someone larger than a small individual is in the front passenger seat, have the front passenger reposition himself or herself in the seat until the 42 indicator lamp goes out, or check whether objects are caught under or around the seat.
The infant or child restraint must be properly secured with the vehicle’s seat belt, the seat belt and top tether strap, or lower anchors and top tether strap, fully in accordance with the child seat manufacturer’s instructions.
sufficient severity to deploy the driver front air bag 42 indicator lamp : will be illuminated, except with the SmartKey removed from the starter switch or with the starter switch in position 0 .
with the passenger seat cushion and backrest. If necessary, adjust the tilt of the passenger seat backrest. An incorrectly mounted child seat could cause injuries to the child in case of an accident, instead of increasing protection for the child. Follow the manufacturer’s instructions for installation of child seats.
A child in a rear-facing child restraint on the front passenger seat will be seriously injured or even killed if the front passenger front air bag inflates.
G Warning! The BabySmart™ air bag deactivation system will ONLY work with a special child seat designed to operate with it. It will not work with child seats which are not BabySmart™ compatible. Never place anything between seat cushion and child seat (e.
Have all work carried out only by qualified technicians. Contact an authorized Mercedes-Benz Center. Proper use of seat belts G Warning! USE SEAT BELTS PROPERLY R Seat belts can only protect when used properly. Never wear seat belts in any other way than as described in this section, as that could result in serious injuries in case of an accident.
G Warning! Do not pass seat belts over sharp edges. They could tear. Do not allow the seat belt to get caught in the door or in the seat adjustment mechanism. This could damage the seat belt. Never attempt to make modifications to seat belts. This could impair the effectiveness of the seat belts.
Seat belt outlet height adjustment X Raising: Slide the seat belt outlet height adjuster upward. The seat belt outlet height adjuster engages in different positions. X Lowering: Press and hold release button : . X Slide the seat belt outlet height adjuster downward.
If you and/or your passenger release the seat belt during driving, the seat belt telltale 7 starts flashing and the warning chime sounds as described before.
The PRE-SAFE ® system takes preventive measures to better protect the occupants from the possibility of personal injuries in the following hazardous situations: R emergency braking maneuvers with the Brake Assist System (BAS) ( Y page 63) activated R critical dynamic driving situations, e.
must be reset. Otherwise, the NECK-PRO active front head restraints cannot offer any additional protection in the event of another rear-end collision. For information on resetting the activated NECK-PRO active front head restraints, see “Resetting activated head restraints” ( Y page 325).
Make sure: R The seat belt is always fitted snugly. R Adjust the seat belt so that the shoulder section is located as close as possible to the middle of the shoulder. R Place the lap portion of the seat belt as low as possible on your hips. Seat and head restraint G Observe Safety notes, see page 82.
Unsecured or improperly positioned cargo increases a child’s risk of injury in the event of R strong braking maneuvers R sudden changes of direction R an accident Infant and child restraint systems G Observe Safety notes, see page 55. We recommend all infants and children be properly restrained at all times while the vehicle is in motion.
infant restraint, toddler restraint, or booster seat recommended for the size and weight of the child. The infant or child restraint must be properly secured with the vehicle’s seat belt, the seat belt and top tether strap, or lower anchors and top tether strap, fully in accordance with the child seat manufacturer’s instructions.
accident, they could be crushed between the occupant and seat belt. A child’s risk of serious or fatal injuries is significantly increased if the child restraints are not properly secured in the vehicle and/ or the child is not properly secured in the child restraint.
X Guide top tether strap ? between the head restraint and top of the seat backrest. X Securely fasten hook = , which is part of top tether strap ? , to anchorage ring ; .
X Remove anchorage ring covers : from anchors ; of the seat on which a child seat is to be installed. Example, second-row seats X Install a LATCH-type child seat according to the manufacturer’s instructions. A rigid connection between the child seat and the body of the vehicle is established.
The rear door windows can no longer be operated using the respective switch located in the rear doors. You can still operate the rear door windows using the switches located on the door control panel of the driver’s door. X Deactivating: Press override switch : again.
achieved with winter tires, or snow chains as required. Safety notes G Warning! The following factors increase the risk of accidents: R Excessive speed, especially in turns R Wet and slippery road sur.
If the ABS malfunctions, the wheels may lock during hard braking, reducing steering capability and extending the braking distance. Off-road ABS With the off-road driving program switched on, or with the transmission in LOW RANGE mode, the ABS designed for off-road driving is activated automatically.
G Warning! Never switch off the ESP ® when you see the ESP ® warning lamp d flashing in the instrument cluster. In this case proceed as follows: R When driving off, apply as little throttle as possible. R While driving, ease up on the accelerator pedal.
G Warning! Switch on the ESP ® immediately if the aforementioned circumstances do not apply anymore. Otherwise the ESP ® will not stabilize the vehicle when it is starting to skid or a wheel is spinning.
allows the vehicle-trailer combination to stabilize. The ESP ® trailer stabilization is functional at vehicle speeds above approximately 40 mph (65 km/h) when the ESP ® is switched on.
X Arming: Lock the vehicle with the SmartKey or with KEYLESS-GO. The turn signal lamps flash three times to indicate that the vehicle is locked. Indicator lamp : flashes to indicate that the alarm system is armed. i If the turn signal lamps do not flash three times, a door or the tailgate may not be properly closed.
68 X164_AKB; 5; 31, en-US d2ureepe, Version: 2.11.8.1 2009-09-11T12:30:16+02:00 - Seite 68.
Vehicle equipment .............................. 70 Locking and unlocking ....................... 70 Starter switch positions ..................... 80 Seats .................................................... 82 Multifunction steering wheel .........
Vehicle equipment i This Operator’s Manual describes all features, standard or optional, potentially available for your vehicle at the time of purchase. Please be aware that your vehicle might not be equipped with all features described in this manual.
i Canada only: This device complies with RSS-210 of Industry Canada. Operation is subject to the following two conditions: 1. This device may not cause interference, and 2. this device must accept any interference received, including interference that may cause undesired operation of the device.
Important notes on using KEYLESS-GO R You can also use the SmartKey with KEYLESS-GO like a normal SmartKey ( Y page 70). R You can combine KEYLESS-GO functions with normal SmartKey functions (e.g. unlocking with KEYLESS-GO and locking with button & ).
Unless you open a door or the tailgate within approximately 40 seconds after unlocking the vehicle: R The vehicle will be locked again. R The antitheft alarm system will be rearmed. X Global locking: Press lock button : on an outside door handle. Selective setting If you frequently travel alone, you may wish to reprogram the SmartKey.
information on replacing the SmartKey, see “Replacing the SmartKey” ( Y page 74). Replacing the SmartKey Only you, or someone authorized by you can order a replacement key from any Mercedes- Benz Center.
Locking and unlocking from the inside G Observe Safety notes, see page 55. You can lock or unlock the vehicle from the inside using the central locking switches. This can be useful, for example, if you want to lock the vehicle before starting to drive.
X Lower tailgate by pulling firmly on handles : . X Close tailgate with hands placed flat on it. Once the tailgate touches the latch, the tailgate will pull itself shut automatically. Opening the tailgate from the inside G Warning! Do not leave children unattended in the vehicle.
- pressing the tailgate closing switch - pressing the KEYLESS-GO locking/ closing switch Notes for operating the tailgate with the SmartKey: You can also open, close, and stop the tailgate by pressing button F on the SmartKey. The prerequisites for this are: R No SmartKey is inserted in the starter switch.
X Press tailgate closing switch : or press and hold button F on the SmartKey until the tailgate begins to close. If the tailgate comes into contact with an object while closing, the closing procedure is stopped and the tailgate reopens. This may happen if luggage has been piled too high, for example.
Opening/closing the tailgate from the inside Opening G Observe Safety notes, see page 76. G Warning! Maintain sight of the area around the rear of the vehicle while operating the tailgate with the door-mounted remote tailgate switch. Monitor the opening procedure carefully to make sure no one is in danger of being injured.
X Press and hold the tailgate closing switch in the tailgate ( Y page 78) until you hear a short acoustic signal. The opening height of the tailgate is limited.
the SmartKey is in the vehicle, the vehicle’s electrical systems can be switched on or the engine can be started using the KEYLESS-GO start/stop button. : KEYLESS-GO start/stop button ; Starter switch X Insert the KEYLESS-GO start/stop button into the starter switch (if not inserted already).
Seats Safety notes G Warning! In order to avoid possible loss of vehicle control the following must be done before the vehicle is put into motion: R seat adjustment R head restraint adjustment R steering wheel adjustment R rear view mirror adjustment R fastening of seat belts G Warning! Do not adjust the driver’s seat while driving.
Do not drive the vehicle without the seat head restraints. Head restraints are intended to help reduce injuries during an accident. Seat adjustment ! When moving the seats, make sure there are no items in the footwell or behind the seats. Otherwise, you could damage the seats and/or the items.
lowest non-use position and have the occupant adjust the head restraint properly. ! Do not attempt to remove front seat head restraints. They can only be removed by qualified technicians. We recommend that you have this work carried out by an authorized Mercedes-Benz Center.
Easy-entry/exit feature for third-row seats This feature allows for easier access to and exit from the vehicle’s third-row seats. G Warning! To help avoid personal injury, the second-row seat backre.
Easy-exit feature for third-row seats The easy-exit strap is located on the right rear of the second-row seat base. Easy-exit strap X To exit the vehicle when seated on a third- row seat, pull up and hold easy-exit strap : . The right second-row seat backrest folds forward.
! Make sure the head restraint is pushed all the way down. X Pull emergency release : in the direction of arrow. X Push seat backrest ; forwards. G Warning! To help avoid personal injury when folding .
backrest could fold. The child seat would no longer be properly supported or positioned to provide its intended benefit. Seat backrest tilt (second-row seats) G Warning! The seat belt only offers its intended protection when the seat backrest is in a nearly vertical position and the occupant is sitting upright.
Head restraint fore and aft adjustment The angle of the head restraint for the outer second-row seats or the third-row seats can be adjusted manually. X While seated, reach behind you with both hands and find lower edge of the head restraint.
Multicontour seats The multicontour seat has a movable seat cushion and inflatable air cushions built into the seat backrest to provide additional lumbar and side support. X Switch on the ignition. X Seat cushion depth: Adjust the seat cushion depth to the length of your upper leg using switch : .
Rear seat heating switches The red indicator lamps ; in front or rear seat heating switch : come on to show which heating level you have selected. The seat heating switches from level 3 (high) to level 2 after approximately 5 minutes. The seat heating switches from level 2 to level 1 (low) after approximately 10 minutes.
X Locking: Push release handle : back to its original position. X Make sure the steering wheel is securely locked by trying to move it up and down as well as in and out before driving off. Steering wheel adjustment, electrical X Adjusting steering wheel in or out: Move stalk in direction of arrows : .
motion. Driving off with the steering wheel still adjusting could cause the driver to lose control of the vehicle. Crash-responsive exit aid When you open the driver’s door after an accident has occurred, the steering column moves up. The position of the SmartKey in the starter switch is insignificant.
Interior rear view mirror, antiglare position X Tilt the mirror to the antiglare position by moving lever : towards the windshield. The interior rear view mirror is dimmed. Exterior rear view mirrors G Warning! Exercise care when using the passenger-side exterior rear view mirror.
The rear view mirrors will not react if the automatic transmission is set to reverse gear R or the interior lighting is switched on. G Warning! The auto-dimming function does not react if incoming light is not aimed directly at sensors in the interior rear view mirror.
The exterior rear view mirrors fold in automatically as soon as the vehicle is locked from the outside. The exterior rear view mirrors fold out automatically as soon as the vehicle is unlocked and the driver’s or front passenger door is subsequently opened.
Storing positions into memory X Adjust the seats. X On the driver’s side, also adjust the steering wheel and exterior rear view mirrors to the desired positions. X Press memory button M once and within 3 seconds press memory position button 1 , 2 or 3 .
i The exterior lamps (except standing lamps or parking lamps) go out automatically when you remove the SmartKey from the starter switch or open the driver’s door with the ignition switched off.
Daytime running lamp mode In Canada, the daytime running lamp mode is mandatory and therefore in a constant mode. In the USA, the daytime running lamp mode is deactivated by default. X Activate the daytime running lamp mode using the control system, see “Switching daytime running lamp mode on or off (USA only)” ( Y page 136).
Vehicles with front fog lamps X Switching on front fog lamps: Pull out the exterior lamp switch to first stop. The green indicator lamp N in the exterior lamp switch comes on. X Switching on rear fog lamp: Pull out the exterior lamp switch to second stop.
High-beam flasher X Switching on: Pull the combination switch briefly in direction of arrow = . Hazard warning flasher The hazard warning flasher can be switched on at all times, even with the SmartKey removed from the starter switch. The hazard warning flasher comes on automatically when an air bag deploys.
R unlock the vehicle R remove the SmartKey from the starter switch ( Interior Lighting Delayed Shut-off must be switched on ( Y page 138)) R open a door R open the tailgate The interior lighting goes out after a short time.
Third-row reading lamps and interior lighting : p Right third-row reading lamp on/off ; p Left third-row reading lamp on/off = Left third-row reading lamp ? Rear interior lighting A Right third-row reading lamp i The rear interior lighting is switched on and off using the button on the front overhead control panel ( Y page 101).
! If you have set intermittent wiping, dirt on the surface of the rain sensor or optical effects may cause the windshield wipers to wipe in an undesired fashion. This could then damage the windshield wiper blades or scratch the windshield. You should therefore switch off the windshield wipers when weather conditions are dry.
For information on filling up the washer reservoir, see “Washer system and headlamp cleaning system” ( Y page 232). Problems with wipers ! If anything blocks the wipers (leaves, snow, etc.), switch them off immediately. For safety reasons, do the following before attempting to remove any blockage: R Stop the vehicle in a safe location.
G Warning! Do not keep any part of your body up against the window pane when opening a window. The downward motion of the pane may pull that part of your body down between the window pane and the door frame and trap it there. If there is a risk of entrapment, release the switch and pull it to close the window.
X Closing: Pull switch A and release. Both hinged quarter windows close completely. i When the obstruction sensor detects that a hinged quarter windows is blocked during the closing process, they will stop and open slightly. X Halting closing process: Press or pull switch A once more during the closing process.
anyone being harmed by the closing procedure, press and hold button & . Vehicles with KEYLESS-GO: R Release the lock button on the outside door handle to stop the closing procedure. R Immediately pull on the same outside door handle and hold firmly.
Automatic transmission Gearshift pattern for automatic transmission : Button for selecting park position P j Park position k Reverse gear i Neutral position h Drive position For more information on how to operate the gear selector lever, see “Automatic transmission” ( Y page 114).
X Depress the brake pedal during the starting procedure. X Do not depress the accelerator pedal. X Gasoline engine: Press the KEYLESS-GO start/stop button once. The engine starts automatically. X Diesel engine: Press the KEYLESS-GO start/stop button once.
! Simultaneously depressing the accelerator pedal and applying the brakes reduces engine performance and causes premature brake and drivetrain wear which is not covered by the Mercedes-Benz Limited Warranty. i Once the vehicle is in motion, the automatic central locking function engages and the locking knobs in the doors move down.
In case of accident If the vehicle is leaking fuel: X Do not start the engine under any circumstances. X Exit the vehicle at a safe distance from the roadway. X Notify local fire and/or police authorities. If the extent of the damage cannot be determined: X Contact an authorized Mercedes-Benz Center or call Roadside Assistance.
(Canada only) in the instrument cluster comes on. Turning off the engine G Warning! Do not turn off the engine before the vehicle has come to a complete stop. With the engine not running, there is no power assistance for the brake and steering systems.
Automatic transmission Introduction For information on driving with an automatic transmission, see “Driving and parking” ( Y page 108). G Warning! Make sure absolutely no objects are obstructing the pedals’ range of movement. Keep the driver’s footwell clear of all obstacles.
i Shifting the automatic transmission out of park position P is only possible with the brake pedal depressed. Without the brake pedal depressed, the gear selector lever can be moved up or down, but the parking pawl remains engaged, not allowing shifting to occur.
With SmartKey: X Make sure the ignition is switched on. X With the vehicle at a standstill, depress the brake pedal and keep it pressed. X Shift the automatic transmission into neutral position N . X Release the brake pedal. X If engaged, release the parking brake.
Effect B Park position Shift the automatic transmission into park position P only when the vehicle is stopped. The park position is not intended to serve as a brake when the vehicle is parked. Rather, the driver should always engage the parking brake in addition to shifting the automatic transmission into park position P to secure the vehicle.
Rocking the vehicle Rocking the vehicle by shifting the automatic transmission directly between drive position D and reverse gear R can help free a vehicle stuck in mud or snow.
i You cannot shift with the steering wheel gearshift control when the automatic transmission is in park position P , neutral position N , or reverse gear R . Limiting gear range G Warning! On slippery road surfaces, never downshift in order to obtain braking action.
covered by the Mercedes-Benz Limited Warranty. ! Because the ESP ® operates automatically, the engine and ignition must be shut off (SmartKey in starter switch position 0 or 1 or KEYLESS-GO start/stop button in position 0 or 1 ) when the parking brake is being tested on a brake test dynamometer.
Switching LOW RANGE mode Switching LOW RANGE mode on (switching from HIGH RANGE to LOW RANGE) ! The shifting procedure can only be performed when the following conditions are met: R The engine is running. R The automatic transmission is in neutral position N .
and rear axle differential to improve vehicle traction. The center differential compensates for differences in wheel rotation between the front and rear axle. The rear axle differential compensates differences between the rear wheels. i At the front axles, the 4-ETS system compensates for any traction problems.
You can select between three locking modes. Rotary switch for differential locks : Rotatable outer adjustment ring with indicator lamp 2 AUTO mode: center differential is automatically locked 3 Center.
menu, see the “Controls in detail” section ( Y page 131). Example illustration A Center differential completely locked ! If the differential locks have been manually engaged, the tires will scuff on the road surface when cornering because the differences between the individual wheel rotation speeds will not be compensated for.
i The instrument cluster illumination is dimmed or brightened automatically to suit ambient light conditions. The instrument cluster illumination will also be adjusted automatically when you switch on the vehicle’s exterior lamps.
: Multifunction display ; Press button ~ to end a call to reject an incoming call 6 to answer a call to dial 10 to redial 10 Press button W X to select submenus in the Settings menu to set values to s.
The number of menus available in the system depends on which optional equipment is installed in your vehicle. Multifunction display : Trip odometer ; Main odometer = Transmission position/gear range i.
Function : Standard display menu ( Y page 128) ; Audio/DVD menu ( Y page 129) = Navigation menu ( Y page 130) ? Off-road menu ( Y page 131) A Distronic menu ( Y page 131) B Vehicle status message memo.
The engine should not be operated with a coolant temperature above 248‡ (120†). Doing so may cause serious engine damage which is not covered by the Mercedes-Benz Limited Warranty.
X Selecting next or previous stored station: Press button * or & briefly to select a stored station. X Selecting next or previous station in the station list: Press and hold button * or & to select a station.
Please refer to separate COMAND system operating instructions for instructions on how to activate the route guidance system. Off-road menu The Off-road menu displays the messages for air suspension, differential locks and the direction into which you are currently driving.
X Press button & or * . The stored messages will now be displayed in the order in which they have occurred. For malfunction and warning messages, see “Vehicle status messages in the multifunction display” ( Y page 287). i After you have scrolled through all recorded status messages, the first recorded message appears again.
approximately 5 seconds, the Settings menu reappears in the multifunction display. Submenus in the Settings menu X Press button V or U repeatedly until the Settings menu appears in the multifunction display. X Press button & . The collection of the submenus appears in the multifunction display.
The following functions are available: R Selecting speedometer/odometer display mode ( Y page 134) (Canada only) R Selecting digital speedometer display mode ( Y page 134) R Selecting language ( Y pag.
Selecting display (digital speedometer or outside temperature) for status indicator X Press button V or U repeatedly until the Settings menu appears in the multifunction display. X Press button & . X Move the selection marker with button W or X to the Instrument Cluster submenu.
Example illustration for setting the month X Press button W or X to set the month, day, or year. Lighting submenu Access the Lighting submenu via the Settings menu.
R Parking lamps R Tail lamps R License plate lamps R Side marker lamps R Front fog lamps The locator lighting goes out when the driver’s door is opened. If you do not open the driver’s door after unlocking the vehicle with the SmartKey, the lamps will go out automatically after approximately 40 seconds.
X Press button V or U repeatedly until the Settings menu appears in the multifunction display. X Press button & . X Move the selection marker with button W or X to the Lighting submenu. X Press button & or * repeatedly until the message Headlamp Delayed Shut- off appears in the multifunction display.
X Move the selection marker with button W or X to the Vehicle submenu. X Press button & or * repeatedly until the message Automatic Door Locking appears in the multifunction display. The selection marker is on the current setting. X Press button W or X to switch the automatic central locking On or Off .
X Move the selection marker with button W or X to the Comfort submenu. X Press button & or * repeatedly until the message Belt Adjustment appears in the multifunction display. The selection marker is on the current setting. X Press button W or X to active ( On ) or deactivate ( Off ) the seat belt adjustment feature.
: Symbol for activated distance warning function If the distance warning function is switched on you will see the symbol Ä in the Standard display. When the distance warning function is switched off the symbol Ä will not appear.
Fuel consumption statistics since last reset X Press button U or V repeatedly until the message From Start appears in the multifunction display. X Press button & or * repeatedly until the message From Reset appears in the multifunction display.
your safety and the safety of others, we recommend that you pull over to a safe location and stop before placing or taking a telephone call. If you choose to use the telephone while driving, please use the hands- free device and only use the telephone when weather, road and traffic conditions permit.
If the connection is successful and this feature is supported by your network provider, the name of the party (if stored in your phone book) you are calling will appear in the multifunction display. The control system stores the dialed number in the redial memory.
remain responsible for the vehicle’s speed and for safe brake operation. Only use the cruise control if the road, traffic, and weather conditions make it advisable to travel at a constant speed. R The use of the cruise control can be dangerous on winding roads or in heavy traffic because conditions do not allow safe driving at a constant speed.
the grade eases, the set speed will be resumed. On downhill grades, the cruise control maintains the set speed by braking with the vehicle’s brake system. In addition, on longer downhill grades the automatic transmission will downshift automatically.
X Increasing: Briefly lift the cruise control lever up past the resistance point in direction of arrow : . X Decreasing: Briefly press the cruise control lever down past the resistance point in direction of arrow ; . X Release the cruise control lever.
G Warning! The Distronic adaptive cruise control is not a substitute for active driving involvement. It does not react to pedestrians or on stationary objects, nor does it recognize or predict the lane curvature or the movement of preceding vehicles. The Distronic can only apply 20% of the maximum braking power of the vehicle.
This device has been approved by the FCC as a “Vehicular Radar System”. The radar sensor is intended for use in an automotive radar system only. Removal, tampering, or altering of the device will void any warranties, and is not permitted by the FCC.
Immediately brake the vehicle to increase your distance to the preceding vehicle. The warning sound is intended as a final caution in which you should intercede with your own braking inputs to avoid a potentially dangerous situation. Do not wait for the operation of the warning signal to intercede with your own braking.
: Setting current or higher speed ; Setting current or lower speed = Deactivating the Distronic ? Activating the Distronic or resuming to the last set speed Activating Distronic You can activate the Distronic when the vehicle speed is between 20 mph (30 km/h) and 110 mph (180 km/h).
When you use the cruise control lever to decelerate, the brake system will brake the vehicle automatically if the engine’s braking power does not brake the vehicle sufficiently.
R the ESP ® has switched off due to a malfunction R you shift the automatic transmission into neutral position N while driving The cruise control speed segments in the speedometer dial goes out and an acoustic warning will sound. Observe additional messages in the multifunction display that may appear.
The Distronic regulates only the distance between your vehicle and those directly ahead of it, but does not register stationary objects in the road, e.
have not yet been detected by the Distronic. There will be insufficient distance to the preceding vehicles. Distance warning function This function warns you at a vehicle speed of above approximately .
The DSR is an aid for driving downhill. The DSR regulates your vehicle’s speed when driving downhill to the value set in the control system ( Y page 141). The steeper the downhill gradient is, the greater the brake application. On flat road surfaces, the DSR brakes only slightly or not at all.
G Warning! If the accelerator pedal is depressed while the Downhill Speed Regulation (DSR) is activated, the vehicle can drive faster than the programmed set speed. You should therefore drive downhill with particular caution as it could otherwise lead to an accident and/or serious injury to you or others.
Increase set speed: X Briefly lift the cruise control lever up to the resistance point in direction of arrow : . X Release the cruise control lever. The vehicle speed increases in increments of 1 mph (Canada: 1 km/h). Reduce set speed: X Briefly press the cruise control lever down to the resistance point in direction of arrow ; .
X Switching off: Press switch : again. Indicator lamp ; goes out. The symbol Ç disappears. Air suspension program The system lets you select the chassis and suspension setup. The chassis and suspension setup adjusts the damping behavior and the ride height for your vehicle.
Changes to the vehicle level should be made while the vehicle is moving. The vehicle will then reach the set level as fast as possible. When you park the vehicle and the ambient temperature changes, the vehicle level may change visibly. When the temperature drops, the vehicle lowers.
Basic settings The following vehicle chassis ride heights can be selected using vehicle level control switch : in the center console: Level Driving situation Raised level For off-road driving or driving in rough terrain. Indicator lamp ; is on. Highway level For driving on paved roads in fair or better condition.
damage to the vehicle underbody. Always make sure the vehicle has sufficient ground clearance before adjusting it to a lower level. X Start the engine. When indicator lamp ; is on: X Press vehicle level control switch : . Indicator lamp ; flashes. The vehicle adjusts to the highway level.
Level Ride height Off-road level 3 +3.5 in (90 mm) Off-road level 2 +2.3 in (60 mm) Off-road level 1 +1.2 in (30 mm) Highway level 13 +/-0 in (0 mm) Highspeed level -0.6 in (-15 mm) i Vehicles with ADS: Depending on the ADS setting ( Y page 159), the vehicle will be lowered to the highspeed level when traveling at higher speeds.
R Off-road level 1, lower indicator lamp flashes R Off-road level 2, lower and middle indicator lamps flashes R Off-road level 3, lower, middle and upper indicator lamps flashes The vehicle adjusts to the corresponding off-road level.
The vehicle is lowered to off-road level 2. Once off-road level 2 is reached, you will see, for example, the following message in the multifunction display: While driving, the vehicle is lowered autom.
i The message can be cleared by pressing the V , U , & or * button on the multifunction steering wheel. When the highway level is reached, indicator lamps = go out and the following message appear.
in the front bumper and four sensors in the rear bumper. To function properly, sensors : must be free of dirt, ice, snow and slush. Clean sensors : regularly. Be careful not to scratch or damage sensors : , see “Cleaning the driving systems sensors” ( Y page 278).
signal. If the obstacle is closer than the minimum distance, the actual distance may no longer be indicated by the Parktronic system. Warning indicators Visual signals indicate the relative distance between the sensors and an obstacle.
Vehicle without enhanced off-road package Vehicle with enhanced off-road package X Switching off: Press Parktronic switch : . Indicator lamp ; comes on.
G Warning! The rear view camera is only an aid and may display obstacles R from a distorted perspective R inaccurately R may not display obstacles at all The rear view camera does not relieve you of the responsibility to be cautious. Take care and pay careful attention.
G Warning! Please note that objects which do not touch the ground may appear to be further away than they actually are, for example: R the bumper of a vehicle parked behind you R a trailer hitch R the back of a truck In such cases, you should not use the guidelines to judge the distance.
Overview of climate control system functions and air vents Your vehicle is equipped with either of the following climate control systems: Climate control ( Y page 175) 3-zone automatic climate control USA only ( Y page 181) Canada only ( Y page 183) The climate control combines an automatic heating and ventilation system with a cooling system.
For best possible performance of the climate control: X Keep the air intake grille in front of the windshield free of snow, leaves, sticks, and any other debris. X Always keep all air vents and grilles in the passenger compartment free from obstruction.
Air vents in the roof liner over the second-row seats Vehicles with 3-zone automatic climate control only : Thumbwheel for air volume control ; Air vent, adjustable X Opening/closing: Turn thumbwheels : upward or downward.
Climate control Control panel Function Recommendation/Notes : Temperature control, driver’s side i Set the temperature to 72‡ (22†). ( Y page 178) ; Air distribution and air volume (automatic mode) i Switches on the automatic mode. The indicator lamp in button à comes on.
Function Recommendation/Notes C Temperature control, passenger side i Set the temperature to 72‡ (22†). ( Y page 178) D ± Rear climate control on/ off or air supply for rear passenger compartment.
and the windows could fog up, impairing visibility and endangering you and others. Have a clogged filter replaced as soon as possible at an authorized Mercedes-Benz Center. The air conditioning will not engage (no cooling) if the A/C mode is deactivated ( Y page 177).
The air conditioning uses the refrigerant R134a. This refrigerant is free of CFCs which are harmful to the ozone layer. ! If the air conditioning cannot be activated again, this indicates that the air conditioning is losing refrigerant. The compressor has turned off.
Adjusting air volume X Decreasing/increasing: Press button I or K . The automatic mode is switched off. The selected blower speed is shown in air volume display G ( Y page 175). When using the Voice Control System, the blower speed reduces automatically.
Air recirculation mode Switch to air recirculation mode to prevent unpleasant odors from entering the vehicle from the outside (e. g. before driving through a tunnel). This setting cuts off the intake of outside air and recirculates the air in the passenger compartment.
3-zone automatic climate control Control panels USA only Function Recommendation/Notes : Temperature control, driver’s side i Set the temperature to 72‡ (22†). ( Y page 187) ; Air distribution and air volume (automatic mode) i Switches on the automatic mode.
Function Recommendation/Notes B AC cooling on/off i Switches on the air conditioning. The indicator lamp in button Á comes on. ( Y page 186) Residual heat/ventilation i With the engine turned off, it is possible to continue to heat or ventilate the interior.
Canada only Function Recommendation/Notes : Temperature control, driver’s side i Set the temperature to 72‡ (22†). ( Y page 187) ; Air distribution and air volume (automatic mode) i Switches on the automatic mode. The indicator lamp in button à comes on.
Function Recommendation/Notes F Automatic climate control on/ off i Switches on the climate control system. The indicator lamp in button ^ goes out. ( Y page 185) G Air distribution, passenger side (d.
Rear automatic climate control : Increasing air volume ; Temperature control = Air distribution and air volume (automatic mode) ? Air distribution (directs air through the side air vents) A Air distri.
Canada only: Display J ( Y page 183) is cleared. X Reactivating: Press button à . i You can also press button ^ on the climate control panel. If you press button ¦ to reactivate the climate control system, the defrosting mode is activated. Deactivating the rear climate control from the front USA only X Deactivating: Press button ± .
The air conditioning uses the refrigerant R134a. This refrigerant is free of CFCs which are harmful to the ozone layer. ! If the air conditioning cannot be activated again, this indicates that the air conditioning is losing refrigerant. The compressor has turned off.
Front temperature with front climate control panel USA only X Increasing/decreasing: Turn temperature control : and/or C ( Y page 181) slightly clockwise or counterclockwise. Canada only X Increasing/decreasing: Turn temperature control : and/or E ( Y page 183) slightly clockwise or counterclockwise.
Symbol Driver’s side Symbol Passenger side Function Z M Directs air to the windshield and side air vents P Directs air through the center, side and rear passenger compartment air vents c O Directs .
was set before the front defroster was switched on. The indicator lamp in button ¦ goes out. The indicator lamp in button Á comes on. or X Turn temperature control : and/or C (USA only) ( Y page 181) or : and/or E (Canada only) ( Y page 183) slightly in any direction.
i The manually selected air recirculation mode is deactivated automatically: R after 5 minutes if the outside temperature is below approximately 41‡ (5†) R after 5 minutes if the air conditioning .
X Switch on the ignition. X Switching on: Press button ª on the respective climate control panel. The indicator lamp in the button comes on. X Switching off: Press button ª again. The rear window defroster switches off when the battery voltage is too low.
Sunroof switch With the sunroof closed or raised, you can slide the sunroof screen forward and back. Sunroof screen X Switch on the ignition. Opening X Opening manually: Press and hold the sunroof switch to the resistance point in direction of arrow ; .
closing the tilt/sliding sunroof with greater force or without automatic reversal function. If the movement of the tilt/sliding sunroof is blocked during the closing procedure (e.g. by ice or pollution), the tilt/sliding sunroof will stop and open slightly.
The cargo compartment is the preferred place to carry objects. Always use cargo tie-down rings, and if so equipped, always use the cargo net when transporting cargo. Never drive a vehicle with the tailgate open. Deadly carbon monoxide (CO) gases may enter vehicle interior resulting in unconsciousness and death.
Carriers For information about further carriers, contact an authorized Mercedes-Benz Center. G Warning! Only use carriers when the crossbars have been completely mounted. The left and right roof rails are only stabilized by means of the crossbars mounted.
objects attached to them could come loose from your vehicle and cause an accident, thereby injuring you and other persons and/ or causing damage to property, including damage to your vehicle.
: Key ; Cover cap = Sticker FRONT (or REAR) ? Screw for clamping claw A Clamping claw The front and rear crossbars are of different lengths. Please pay close attention to stickers = FRONT and REAR on the crossbars. X Unlock cover cap ; with key : . X Remove cover cap ; .
X Attach cover caps ( Y page 198) and lock them. X Store key and hex key back into the storage well ( Y page 284). Adjusting the clamping widths of the crossbars G Warning! Only install the crossbars at the exact locations designated on the roof rails.
X Unlock cover cap ; with key : . X Remove cover cap ; . X Turn screws for clamping claws A counterclockwise until the crossbars can be lifted from the roof rails. Shortening the cover strip The cover strips reduce the wind noise caused by the crossbars.
Cargo tie down rings, second-row footwell For Information on how to fold the third-row seats, see “Expanding cargo volume” ( Y page 201). Hooks Two hooks are located on the rear compartment trim panels, one on each side. Use the hooks to secure light-weight items only.
Use the right button, indicated by R , to fold down the right third-row seat. Two buttons are located on the right side trim of the third-row seats. i It is only possible to fold the third-row seats down when the rear right door is open.
accident and be thrown around the vehicle interior. Objects thrown around the vehicle interior may cause an accident and/or serious personal injury. Folding second-row seats ! When the second-row seats are folded forward, the front seats may not be moved to the rearmost position.
i It is only possible to fold the third-row seats down when the tailgate is open. Example, button for the right third-row seats : Button for returning third-row seats to upright position ; Button for folding the third-row seats X Lower the head restraints of the third-row seats completely ( Y page 88).
X Step 2: Pull and hold lever ; in direction of arrow at resistance point. X Fold seat backrest : rearward until it engages. X Check for secure locking by pushing and pulling on seat backrest : . X Fold seat cushion = rearward until it locks into position.
X Press on mount cover at its upper edge as indicated by arrow. The mount cover’s lower edge flips up. X Remove mount cover by pulling its lower edge out of the side trim. i To avoid loss of the mount covers, insert the mount covers into the mounts currently not in use.
X Hang cargo net bar ; on holder : as indicated by the arrow. X Push cargo net bar ; forward into holder : in direction of arrow. X Engage lower cargo net bar. The cargo net bar must engage audibly. Pulling the cargo net tight Belt hook attached behind the third-row seat backrest X Hook belt hook : into cargo tie-down ring ; in direction of arrow.
X Opening: Pull glove box lid release : . X Closing: Push glove box lid ; upwards until it engages. You can lock the glove box, e.g. when the vehicle is in the shop for service.
Rear storage compartments Depending on vehicle equipment, your vehicle may not be equipped with three storage compartments in the front of the rear seats. : Storage compartment ; Storage compartment cover = Release button ? Storage compartment X Briefly press release button = on storage compartment cover ; .
! Do not sit on or lean your body weight against the armrest when it is folded down, as you could otherwise damage it. Cup holders in third-row side trims Cup holders are located in the side trims of the third-row seats. Sun visors G Warning! Do not use the vanity mirror while driving.
Vanity mirror Vanity mirror lamp = only functions when sun visor : is engaged in mounting C . X Flip sun visor down. X Lift up vanity mirror cover ? . Vanity mirror lamp = comes on. Rear panorama roof sunshade The rear panorama roof sunshade over the third-row seats prevents the sun from shining directly into the vehicle.
X Reinstalling ashtray insert: Install ashtray insert : . X Closing: Push cover ; . Cigarette lighter G Observe Safety notes, see page 55. G Warning! Never touch the heating element or sides of the lighter; they are extremely hot.
Front passenger footwell Second-row footwell Cargo compartment 115V AC Socket G Warning! The 115V AC socket operates at high voltage. Use the 115V AC socket in the vehicle with the same caution and prudence that you exercise when using power outlets at home.
Prerequisites for operation: R The 12V power outlets in the second-row footwell and cargo compartment ( Y page 212) are operational. R The plug of the small device must be inserted fully into 115V AC socket : . R The on-board voltage of the vehicle is within the permissible voltage range.
The Tele Aid system consists of three types of response: R Automatic and manual emergency R Roadside Assistance R Information To adjust the speaker volume during a Tele Aid call do the following: X Press button W or X on the multifunction steering wheel.
(determined by the GPS satellite location system), vehicle model, identification number and color are generated. A voice connection between the Customer Assistance Center and the occupants of the vehicle will be established automatically soon after the emergency call has been initiated.
X Press and hold Roadside Assistance button : for longer than 2 seconds. A call to a Mercedes-Benz Roadside Assistance dispatcher will be initiated. The indicator lamp in Roadside Assistance button : will flash while the call is in progress. The message Connecting Call will appear in the multifunction display and the COMAND system is muted.
navigation menu by pressing the NAVI button on the COMAND system. Spoken commands are not available. A voice connection between the Customer Assistance Center representative and the occupants of the vehicle will be established.
on “Search & Send”, refer to separate COMAND system operating instructions. Remote door unlock In case you have locked your vehicle unintentionally (e.
When programming a garage door opener, park vehicle outside the garage. Do not run the engine while programming the integrated remote control. Inhalation of exhaust gas is hazardous to your health. All exhaust gas contains carbon monoxide (CO), and inhaling it can cause unconsciousness and possible death.
Rolling code programming To train a garage door opener (or other rolling code devices) with the rolling code feature, follow these instructions after completing the “Programming” portion (steps 1 through 6) of this text. For your convenience and to complete the procedure faster, you might want to have someone assist you.
Reprogramming a single signal transmitter button To program a device using a signal transmitter button previously trained, follow these steps: X Switch on the ignition. X Press and hold the desired signal transmitter button ( ; , = or ? ). Do not release the button.
i USA only: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. this device must accept any interference received, including interference that may cause undesired operation.
To allow the use of these devices in the vehicle, infrared transparent areas : are placed in the windshield. Seat cover under third-row seats If something falls under the third-row seats, you can remove the seat cover in order to reach under the seats.
Vehicle equipment ............................ 226 The first 1000 miles (1500 km) ....... 226 At the gas station ............................. 226 Engine compartment ........................ 228 Tires and wheels ............................... 233 Winter driving .
Vehicle equipment i This Operator’s Manual describes all features, standard or optional, potentially available for your vehicle at the time of purchase. Please be aware that your vehicle might not be equipped with all features described in this manual.
drained completely. Contact an authorized Mercedes-Benz Center to have the fuel system drained completely. ! Gasoline engine: To prevent damage to the catalytic converters, only use premium unleaded gasoline in this vehicle. Any noticeable irregularities in engine operation should be repaired promptly.
i Leaving the engine running and the fuel filler cap open can cause the yellow fuel tank reserve warning lamp to flash and the malfunction indicator lamp ! (USA only) or ; (Canada only) to illuminate. For more information, see also “Practical hints” ( Y page 320).
G Warning! You could be injured when the hood is open – even when the engine is turned off. Parts of the engine can become very hot. To prevent burns, let the engine cool completely before touching any components on the vehicle. Comply with all relevant safety precautions.
accident, for example. The hood could otherwise come loose while the vehicle is in motion and injure you and/or others. X Let the hood drop from a height of approximately 8 in (20 cm). X Check to make sure the hood is fully closed. If you can raise the hood at a point above the headlamps, then it is not properly closed.
For more information on engine oil, see “Fuels, coolants, lubricants etc.” ( Y page 368). For information on messages in the multifunction display concerning engine oil, see the “Practical hints” section ( Y page 308). Adding engine oil ! Only use approved engine oils and oil filters required for vehicles with Maintenance System.
R Using a rag, slowly open the cap approximately 1 / 2 turn to relieve excess pressure. If opened immediately, scalding hot fluid and steam will be blown out under pressure. R Do not spill antifreeze on hot engine parts. Antifreeze contains ethylene glycol which may burn if it comes into contact with hot engine parts.
For more information, see “Washer system and headlamp cleaning system” ( Y page 370). Brake fluid level ! If you find that the brake fluid in the brake fluid reservoir has fallen to the minimum mark or below, have the brake system checked for brake pad thickness and leaks immediately.
Important guidelines R Only use sets of tires and rims of the same type and make. R Tires must be of the correct size for the rim. R Break in new tires for approximately 60 miles (100 km) at moderate speeds. R Regularly check the tires and rims for damage.
data shown in the following illustration. Refer to Tire and Loading Information placard on vehicle for actual data specific to your vehicle. The Tire and Loading Information placard lists the recommended cold tire inflation pressures : for maximum loaded vehicle weight.
Example illustration: Tire inflation pressures for all approved, factory equipped tires When a tire size is specified, the tire inflation pressure that follows applies to that particular tire size only.
Checking tire inflation pressure Safety notes G Warning! Follow recommended tire inflation pressures. Do not underinflate tires. Underinflated tires wear excessively and/or unevenly, adversely affect handling and fuel economy, and are more likely to fail from being overheated.
Each tire, including the spare, should be checked at least once a month when cold. Inflate the tires to the recommended tire inflation pressure as specified on R the Tire and Loading Information placa.
After a certain “learning phase”, the tire pressure loss warning system checks the set pressure values for all four tires. X If you wish to cancel: Press button X . Advanced Tire Pressure Monitoring System (Advanced TPMS), (USA only) Your vehicle is equipped with the Advanced Tire Pressure Monitoring System (Advanced TPMS).
illuminated, the system may not be able to detect or signal low tire pressure as intended. TPMS malfunctions may occur for a variety of reasons, including the installation of incompatible replacement or alternate tires or wheels on the vehicle that prevent the TPMS from functioning properly.
Tire inflation pressure warnings If the system detects a significant loss of tire inflation pressure in one or more than one tire, a message appears in the multifunction display. In addition, an acoustic warning sounds and the low tire pressure telltale in the instrument cluster comes on.
Maximum tire inflation pressure G Warning! Never exceed the maximum tire inflation pressure. Follow recommended tire inflation pressures. Do not underinflate tires. Underinflated tires wear excessively and/or unevenly, adversely affect handling and fuel economy, and are more likely to fail from being overheated.
Loading Information placard with regards to loading your vehicle. Tire and Loading Information G Warning! Do not overload the tires by exceeding the specified load limit as indicated on the Tire and Loading Information placard on the driver’s door B-pillar.
X Step 3: Subtract the combined weight of the driver and passengers from XXX kilograms or XXX lbs. X Step 4: The resulting figure equals the available amount of cargo and luggage load capacity.
Example 1 Example 2 Example 3 Step 1 Combined weight limit of occupants and cargo from Tire and Loading Information placard 1 500 lbs 1 500 lbs 1 500 lbs Example 1 Example 2 Example 3 Step 2 Number of.
Weight Rating (GVWR) and the Gross Axle Weight Rating (GAWR) for either the front or rear axle. You can obtain the GVWR and GAWR from the certification label. The certification label can be found on the driver’s door B-pillar, see the “Technical data” section ( Y page 360).
You may only use the MOExtended system in conjunction with the tire pressure loss warning system ( Y page 237) or the Advanced TPMS ( Y page 239). i Vehicles with MOExtended system are not factory-equipped with a TIREFIT kit. When retrofitting with tires that do not have run-flat characteristics, e.
recommended minimum tire tread depth for winter tires is 1 / 6 in (4 mm). Treadwear indicator : appears as a solid band across the tread. Storing tires ! Keep unmounted tires in a cool, dry place with as little exposure to light as possible. Protect tires from contact with oil, grease and fuels.
tests, and does not include acceleration, cornering, hydroplaning, or peak traction characteristics. The traction grades, from highest to lowest, are AA, A, B, and C. Those grades represent the tire’s ability to stop on wet pavement as measured under controlled conditions on specified government test surfaces of asphalt and concrete.
dimension front vs. rear), tire rotation is not possible. If applicable to your vehicle’s tire configuration, tires can be rotated according to the tire manufacturer’s recommended intervals in the tire manufacturer’s warranty pamphlet located in your vehicle literature portfolio.
Tire size designation, load and speed rating : Tire width ; Aspect ratio in % = Radial tire code ? Rim diameter A Load index B Speed symbol i For illustration purposes only. Actual data on tires are specific to each vehicle and may vary from data shown in above illustration.
For example, a load rating of 91 corresponds to a maximum load of 1356 lb (615 kg) the tire is designed to support. See also “Maximum tire load” ( Y page 246) where the maximum load associated with the load index is indicated in kilograms and lbs.
Index Speed rating H M+S 17 up to 130 mph (210 km/h) V M+S 17 up to 149 mph (240 km/h) i Not all M+S rated tires provide special winter performance. Make sure the tires you use show M+S and the mountain/ snowflake i marking on the tire sidewall.
The TIN is a unique identifier. The TIN facilitates efforts by tire manufactures to notify purchasers in recall situations or other safety matters concerning tires.
radio, and heater, to the extent that these items are available as factory-installed equipment (whether installed or not). Air pressure The amount of air inside the tire pressing outward on each square inch of the tire. Air pressure is expressed in pounds per square inch (psi), kilopascal (kPa), or bar.
Maximum loaded vehicle weight The sum of curb weight, accessory weight, total load limit, and production options weight. Maximum permissible tire inflation pressure This number is the greatest amount of air pressure that should ever be put in the tire.
Tread The portion of a tire that comes into contact with the road. Treadwear indicators Narrow bands, sometimes called “wear bars” that show across the tread of a tire when only 1 / 16 in (1.6 mm) of tread remains. TWR (Tongue Weight Rating) Maximum permissible weight on trailer tongue.
After installing winter tires: X Check the tire inflation pressure and adjust it if necessary ( Y page 237). X Restart the tire pressure loss warning system ( Y page 237) or the Advanced Tire Pressure Monitoring System ( Y page 239).
maneuvers. Do not use the cruise control system under such conditions. When the vehicle is in danger of skidding, shift the automatic transmission to neutral position N . Try to keep the vehicle under control by corrective steering action. i For information on driving with snow chains, see “Snow chains” ( Y page 258).
Steering and braking requires significantly more effort and you could lose control of the vehicle and cause an accident as a result. Do not turn off the engine while the vehicle is in motion.
Have the brake system inspected immediately. Contact an authorized Mercedes-Benz Center. All checks and service work on the brake system should be carried out by qualified technicians only. Contact an authorized Mercedes-Benz Center. Only install brake pads and use brake fluid recommended by Mercedes-Benz.
! Simultaneously depressing the accelerator pedal and applying the brakes reduces engine performance and causes premature brake and drivetrain wear which is not covered by the Mercedes-Benz Limited Warranty. Hydroplaning Depending on the depth of the water layer on the road, hydroplaning may occur, even at low speeds and with new tires.
We recommend that you start out with easy off-road travel. Special driving features for off-road driving The following driving features are available for specific kind of operation: R Off-road ABS ( Y.
Checklist before off-road driving Engine oil level R Check the engine oil level ( Y page 230). Only with a proper oil level can the vehicle obtain a trouble-free oil supply, even on steep gradients. ! If the engine oil level warning lamp comes on while driving, stop the vehicle in a safe location or as soon at is safe to do so.
100% grade which is equivalent to a slope angle of 45°. Keep in mind that the climbing ability of the vehicle depends on terrain conditions. R Shift automatic transmission into gear range 1 ( Y page 118). R Drive slowly. R Avoid excessive engine speeds – drive with moderate engine speeds (max.
i The special Off-road ABS ( Y page 63) setting allows for precise and brief (cyclical) blocking of the front wheels, permitting them to dig into loose ground. Remember that, when stopped, the front wheels slide across a surface and thus lose their ability to steer the vehicle.
Crossing obstacles ! Obstacles can damage the vehicle underbody or suspension components. If possible use the assistance of a second person outside the vehicle to scout the path you intend to take and check for adequate ground clearance when you cross obstacles with your vehicle.
LOW RANGE mode ( Y page 120) is switched on. R Set the raised level ( Y page 159). ! Check that the ruts are not too deep and your vehicle’s clearance is sufficient. Otherwise: R your vehicle may be damaged R the underbody of the vehicle may come in contact with the ground and you may get stuck R Avoid high engine speeds.
Trailer towing G Warning! Failure to use proper equipment and driving technique can result in a loss of vehicle control when towing a trailer. Improper towing or failure to follow the instructions in this manual can result in vehicle damage and/or serious personal injury.
The values as measured must not exceed the weight limits listed under “Vehicle and trailer weights and ratings” ( Y page 269). Coupling a trailer G Warning! While you are coupling or decoupling a trailer, make sure nobody locks or unlocks the vehicle and/or opens or closes doors or the tailgate.
practice turning, stopping and backing up in an area which is free of traffic. R Before you start driving check the - trailer hitch - break-away switch - safety chains - electrical connections - lighting - tires R Adjust the mirrors ( Y page 94) to permit unobstructed view beyond rear of trailer.
vehicle and/or opens or closes doors or the tailgate. The vehicle’s level could change and you could endanger yourself and/or others as a result. Make sure that you do not operate the ADS button or the vehicle level control system when coupling/decoupling the trailer.
Engine adjustments should not be altered in any way. Moreover, the specified service procedures must be carried out regularly according to Mercedes-Benz servicing requirements. For details refer to the Maintenance Booklet. G Warning! Inhalation of exhaust gas is hazardous to your health.
X Clearing the maintenance service indicator message manually: Press reset button : on the instrument cluster. The standard display appears in the multifunction display.
damage not covered by the Mercedes-Benz Limited Warranty. Vehicle care Cleaning and care of the vehicle Notes Regular and proper care will help to maintain the value of your vehicle. G Warning! Many cleaning products can be hazardous. Some are poisonous, others are flammable.
here. In such cases it is best to seek aid at an authorized Mercedes-Benz Center. The following topics deal with the cleaning and care of your vehicle and give important “how-to” information as well as references to Mercedes-Benz approved vehicle-care products.
X Thoroughly spray the vehicle with a diffused jet of water. X Do not spray directly towards the ventilation intake. X Use plenty of water and rinse the sponge and chamois frequently. X Rinse with clean water and dry with a chamois thoroughly. Do not allow cleaning agents to dry on the finish.
Cleaning the driving systems sensors X Switch off the ignition. X Clean Distronic system sensor cover : by hand. To clean Distronic system sensor cover : and the bumper area near sensors ; observe the following: R Use a mild vehicle wash detergent, such as Mercedes-Benz approved Car Shampoo, with plenty of water.
X Fold the wiper arms forward until they snap into place. X Clean the windshield and the wiper blade inserts with a clean cloth and mild detergent solution. X Use a soft, clean cloth and a mild window cleaning solution on all outside and inside glass surfaces.
Steering wheel X Wipe with a damp cloth and dry thoroughly or clean with Mercedes-Benz approved Leather Care. Carpets X Use Mercedes-Benz approved Carpet and Fabric Care for cleaning the carpets. Headliner X Use a soft bristle brush or a dry-shampoo cleaner in case of excessive dirt.
Chrome-plated exhaust tip Regular cleaning and care of chrome-plated exhaust tips will help to maintain their shine and the classy appearance. X Use Mercedes-Benz approved Chrome Polishing Paste each time the vehicle has been washed, especially during the winter.
282 X164_AKB; 5; 31, en-US d2ureepe, Version: 2.11.8.1 2009-09-11T12:30:16+02:00 - Seite 282.
Vehicle equipment ............................ 284 Where will I find ...? .......................... 284 Vehicle status messages in the multifunction display ....................... 287 What to do if … .................................. 314 Unlocking/locking manually .
Vehicle equipment i This Operator’s Manual describes all features, standard or optional, potentially available for your vehicle at the time of purchase. Please be aware that your vehicle might not be equipped with all features described in this manual.
X Engage securing hook = on upper cargo compartment lip ? . ! With the cargo compartment cover blind installed behind the third-row seats, disengage cargo compartment cover blind and flip it forward. Otherwise the strap of the securing hook could damage the cargo compartment cover blind.
Collapsible wheel chock The collapsible wheel chock serves to secure the vehicle, e.g. while changing a wheel. X Take the collapsible wheel chock from the vehicle tool kit ( Y page 284). X Setting up: Tilt both plates upward : . X Fold the lower plate outward ; .
X Removing: Open the tailgate ( Y page 75). X Lift the cargo compartment floor and secure it on the upper cargo compartment lip ( Y page 284). ! To prevent damage, always disengage the securing hook from upper cargo compartment lip and lower the cargo compartment floor before closing the tailgate.
G Warning! All categories of messages contain important information which should be taken note of and, where a malfunction is indicated, addressed as soon as possible at an authorized Mercedes-Benz Center.
Display messages Possible causes/consequences and M Solutions ABS ABS, ESP Unavailabl e See Operator’s Manual The brake system still functions normally but due to insufficient power supply, the ABS, the BAS, the ESP ® , and the PRE-SAFE ® system are unavailable.
Display messages Possible causes/consequences and M Solutions ESP Unavailabl e See Operator’s Manual If the yellow ESP ® warning lamp d flashes while driving and this message appears, the Electronic Traction System (4-ETS) has switched off to prevent overheating of the drive wheel brakes.
Display messages Possible causes/consequences and M Solutions Front Passenger Airbag Enabled See Operator’s Manual USA only: The front passenger front air bag is activated while driving even though a child, small individual, or object below the system’s weight threshold is on the front passenger seat, or the front passenger seat is empty.
Display messages Possible causes/consequences and M Solutions If above conditions are met, you can occupy the front passenger seat again. Depending on the front passenger classification sensed by the OCS, the 42 indicator lamp will remain illuminated or go out.
Display messages Possible causes/consequences and M Solutions Front Passenger Airbag Disabled See Operator’s Manual USA only: The front passenger front air bag is deactivated while driving even though an adult or someone larger than a small individual is occupying the front passenger seat.
G Warning! If the 42 indicator lamp remains illuminated with an adult occupant on the front passenger seat even after performing the above corrective steps, do not have any passenger use the front passenger seat until the system has been repaired.
Display messages Possible causes/consequences and M Solutions DISTRONIC Currently Unavailabl e See Operator’s Manual Distronic is deactivated because: R The Distronic cover in the radiator grille is dirty. R The functionality is impaired by heavy precipitation or fog.
Vehicle Display messages Possible causes/consequences and M Solutions Depress brake to shift out of P. You have attempted to shift the automatic transmission into drive position D , reverse gear R or neutral position N without depressing the brake pedal.
Tires Display messages Possible causes/consequences and M Solutions Check tires, then restart Run Flat Indicator. There has been a warning message about a loss in the tire inflation pressure and the tire pressure loss warning system was not restarted yet.
Display messages Possible causes/consequences and M Solutions Tire Pressure Monitor Wheel Sensor Missing At least one sensor is defect (e.g. battery is empty). The respective tire is indicated by – – instead of the tire inflation pressure in the multifunction display.
Display messages Possible causes/consequences and M Solutions Check Tire(s) The tire inflation pressure in at least one tire is significantly below the reference value. The respective tire is indicated in the multifunction display. X Carefully bring the vehicle to a halt, avoiding abrupt steering and braking maneuvers.
Display messages Possible causes/consequences and M Solutions $ (USA only) J (Canada only) EBV, ABS, ESP Inoperativ e See Operator’s Manual The brake system is still functioning normally but due to a malfunction, the ABS, the BAS, the EBP, the ESP ® , and the PRE-SAFE ® system are unavailable.
Safety systems Display messages Possible causes/consequences and M Solutions G Tele Aid Inoperativ e One or more main functions of the Tele Aid system are malfunctioning. X Have the Tele Aid system checked at an authorized Mercedes-Benz Center. + Restraint Sys.
Display messages Possible causes/consequences and M Solutions Á Compressor Cooling Down You have selected a higher vehicle level. Due to frequent level changes within a short period, the compressor must cool down first. ! When the message Compressor Cooling Down appears in the multifunction display, driving is still possible.
Display messages Possible causes/consequences and M Solutions 8 Diff. Lock System Overheated - Wait briefly. The differential locks are too hot and have been deactivated as a result. X Continue driving with added caution. The lock function is unavailable.
Vehicle Display messages Possible causes/consequences and M Solutions E You are driving with the hood or the tailgate open. X Stop the vehicle in a safe location as soon as it is safe to do so. X Close the hood ( Y page 229) or the tailgate ( Y page 75).
Display messages Possible causes/consequences and M Solutions + Key Not Detected (message appears in red) The SmartKey with KEYLESS-GO is not detected while the engine is running because the SmartKey is not in the vehicle. X Stop the vehicle as soon as it is safe to do so.
Engine Display messages Possible causes/consequences and M Solutions + Top Up Coolant See Operator’s Manual The coolant level is too low. X Add coolant ( Y page 231). X If you have to add coolant frequently, have the cooling system checked at an authorized Mercedes-Benz Center.
! The engine should not be operated with the coolant temperature above 248‡ (120†). Doing so may cause serious damage which is not covered by the Mercedes-Benz Limited Warranty. Display messages Possible causes/consequences and M Solutions ? Coolant Stop car, switch engine off.
Display messages Possible causes/consequences and M Solutions # The battery is no longer charging. Possible causes: R alternator malfunctioning R broken poly-V-belt R a malfunction in the electronic system X Stop immediately in a safe location or as soon as it is safe to do so and check the poly-V-belt.
Display messages Possible causes/consequences and M Solutions C The fuel level is low. X Refuel at the next gas station. 8 Reserve Fuel The fuel level has dropped below the reserve mark. X Refuel at the next gas station. 8 Ultra Low- sulfur Diesel Fuel Only Vehicles with diesel engine only: The fuel level has dropped below the reserve mark.
Center. After AdBlue ® was refilled, the engine can be started again. Lamps Display messages Possible causes/consequences and M Solutions b Active Headlamps Inoperativ e The active Bi-Xenon headlamp system is malfunctioning. X Contact an authorized Mercedes-Benz Center as soon as possible.
Display messages Possible causes/consequences and M Solutions b Marker Lamp Front Left or Marker Lamp Front Right The front left side or right side marker lamp is malfunctioning. X Replace the bulb as soon as possible ( Y page 328). b Parking Lamp Front Left or Parking Lamp Front Right The left or right front parking lamp is malfunctioning.
Display messages Possible causes/consequences and M Solutions b Low Beam Left or Low Beam Right The left or right low-beam lamp is malfunctioning. X Halogen headlamp: Replace the bulb as soon as possible ( Y page 328). X Bi-Xenon headlamp: Contact an authorized Mercedes- Benz Center as soon as possible.
Display messages Possible causes/consequences and M Solutions b Turn Signal Rear Left or Turn Signal Rear Right The left or right rear turn signal lamp is malfunctioning. A substitute bulb is being used. X Replace the bulb as soon as possible ( Y page 328).
Display messages Possible causes/consequences and M Solutions h Tire Pressure Check Tires The tire inflation pressure in at least one tire is significantly below the reference value. X Carefully bring the vehicle to a halt, avoiding abrupt steering and braking maneuvers.
Brake Problem Possible causes/consequences and M Solutions ! The yellow ABS indicator lamp comes on while the engine is running. The ABS has detected a malfunction and switched off. The BAS, the ESP ® and the PRE-SAFE ® are also switched off. The brake system is still functioning normally but without the systems specified above available.
Problem Possible causes/consequences and M Solutions $ (USA only) J (Canada only) ! d The red brake warning lamp comes on while driving. In addition, the yellow ABS malfunction indicator lamp, and the yellow ESP ® warning lamp come on and an acoustic warning sounds.
Safety systems Problem Possible causes/consequences and M Solutions 7 The red seat belt telltale comes on for a maximum of 6 seconds after starting the engine. The seat belt telltale reminds you and your passengers to fasten your seat belts before driving off.
i After 60 seconds with an unfastened seat belt the warning chime stops sounding and the seat belt telltale illuminates continuously. The seat belt telltale will only go out if both, the driver and front passenger’s seat belt are fastened, or the vehicle is standing still and a front door is opened.
Problem Possible causes/consequences and M Solutions d The yellow ESP ® warning lamp flashes while driving. The ESP ® or the 4-ETS has come into operation because of detected traction loss in at least one tire. The cruise control is deactivated. X When driving off, apply as little throttle as possible.
Vehicle Problem Possible causes/consequences and M Solutions The yellow fuel tank reserve warning lamp in the fuel gauge comes on while driving. The fuel level has gone below the reserve mark.
Tires Problem Possible causes/consequences and M Solutions h USA only: Combination low tire pressure telltale/TPMS malfunction telltale for the Advanced TPMS illuminates continuously. The Advanced TPMS detects a loss of pressure in at least one tire. X Carefully bring the vehicle to a halt, avoiding abrupt steering and braking maneuvers.
sequence will continue upon subsequent vehicle start-ups as long as the malfunction exists. When the malfunction indicator is illuminated, the system may not be able to detect or signal low tire pressure as intended.
G Warning! If the 42 indicator lamp illuminates and remains illuminated with the weight of a typical adult or someone larger than a small individual on the front passenger seat, do not have any passenger use the front passenger seat until the system has been repaired.
SmartKey with KEYLESS-GO X Move locking tab : in the direction of arrow. X Slide mechanical key ; out of the housing. Unlocking the driver’s door X Insert mechanical key ; into the driver’s door lock. X Turn mechanical key ; counterclockwise to position 1 .
In case the central locking system does not release the fuel filler flap, you can open it manually. The fuel filler flap release is located on the passenger side in the cargo compartment behind the cover. X Open the tailgate ( Y page 75). X Open the cover on the passenger-side trim panel ( Y page 332).
Comfort head restraints X Take reset tool : out of the Mercedes- Benz literature pouch. X Guide reset tool : into rectangular opening ; between head restraint cushion and head restraint cover. X Press reset tool : downward in direction of arrow until you hear the head restraint release mechanism audibly engage.
SmartKey X Press mechanical key ; into the SmartKey opening until battery compartment cover : opens. Do not keep the cover shut. X Remove the battery compartment cover. X Pat the SmartKey against the palm of your hand until battery = falls out. X Insert the new battery with the positive terminal (+) facing up.
Replacing bulbs Safety notes Safe vehicle operation depends on proper exterior lighting and signaling to a large degree. Correct headlamp adjustment is extremely important. Have headlamps checked and readjusted at regular intervals and when a bulb has been replaced.
Bulbs You can replace the following bulbs yourself: Halogen headlamps Type : Low-beam lamp: H7 55 W ; High-beam lamp/High-beam flasher lamp: H7 55 W = Parking and standing lamp: W 5 W ? Turn signal la.
Rear lamps Type : Backup lamp: P 21 W ; Rear foglamp (driver’s side only): H 21 W License plate lamps Type : License plate lamps: C 5 W Notes on bulb replacement ! Do not replace LEDs or bulbs not described in this section. You could otherwise damage the LEDs, the bulbs or parts of the vehicle.
Example illustration: Driver’s side headlamp : Housing cover for low-beam halogen or Bi- Xenon headlamp ; Housing cover for high-beam halogen bulb (high beam and high-beam flasher) = Bulb socket for.
X Turn housing cover ; counterclockwise and remove it. X Turn bulb socket C with the bulb counterclockwise and remove it. X Pull the bulb out of bulb socket C . X Gently press the new bulb into bulb socket C . X Place bulb socket C back into the housing and turn it clockwise until it engages.
X Insert a suitable object such as a coin into the slot of lock : . X Turn lock : by 90° in direction of the arrow. X Remove cover ; . Replacing bulbs Example illustration: LED rear lamp driver’s s.
Correct headlamp adjustment is extremely important. High beam adjustments simultaneously aim the low beam. To check and readjust a headlamp, follow the steps described: X Park the vehicle on a level surface 25 feet (7.6 m) from a vertical test screen or wall.
Removing wiper blades Front wiper blades ! Do not pull on the wiper blade inserts. They could tear. X Fold the wiper arms forward until they engage. X Press tabs ; together. X Tilt wiper blade : away from wiper arm = . X Take off wiper blade : in direction of arrow.
Rear wiper blade X Insert wiper blade ; into wiper arm : . X Hold wiper arm : and engage wiper blade ; by pushing it in direction of arrow until it locks into place. X Check whether the wiper blade is securely fastened. X Fold wiper arm : to rest on the rear window.
Open doors only when conditions are safe to do so. X Vehicles with KEYLESS-GO: Remove the KEYLESS-GO start/stop button from the starter switch. X Have any passenger exit the vehicle at a safe distance from the roadway. Open doors only when conditions are safe to do so.
i If sealant has leaked out, let it dry. You can then peel it off. If clothing has come in contact with TIREFIT, have it dry-cleaned with perchloroethylene as soon as possible.
in the second-row footwell for electric air pump operation. X Turn the SmartKey in the starter switch to position 1 . or X Vehicles with KEYLESS-GO: Press the KEYLESS-GO start/stop button once. Do not depress the brake pedal. X Press I on electric air pump switch = .
Version 2 X After driving the vehicle for an initial 10 minutes, check the tire inflation pressure using pressure gauge G on the air pump. G Warning! If tire inflation pressure has fallen below 20 psi (1.
Lifting the vehicle G Warning! When jacking up the vehicle, only use the jack which has been specifically approved by Mercedes-Benz for your vehicle. The jack is designed exclusively for jacking up the vehicle at the jack take-up brackets built into both sides of the vehicle.
Changing wheel on passenger side (example illustration) X Place wheel chocks or other sizeable objects on the downhill side in front of both wheels on the side opposite to the side on which the wheel is to be changed. Changing a wheel on a slight incline Always try lifting the vehicle using the jack on a level surface.
X Attach reversible ratchet ? to jack = in such a way that the word UP can be seen. X Place jack = on firm ground. X Position jack = under take-up bracket ; so that it is always vertical as seen from the side, even if the vehicle is parked on an incline.
Do not tighten the wheel bolts when the vehicle is raised. Otherwise the vehicle could fall off the jack. Wheel bolt : must be used for 19", 20", and 21" light alloy wheels. Wheel bolt ; must be used for the Minispare wheel. The wheel bolts for the Minispare wheel are located in vehicle tool kit.
G Warning! Have the tightening torque checked after changing a wheel. The wheels could come loose if they are not tightened to a torque of 110 lb-ft (150 Nm). X Fully collapse the jack to storage position, see ( Y page 286). X Store the jack and the other vehicle tools in the designated storage space.
sucked into the fuel system. If this happens, the malfunction indicator lamp = (USA only) or ; (Canada only) comes on and the engine may not start immediately after refueling the vehicle. After refueling: X Make sure the automatic transmission is in park position P .
Refilling with AdBlue ® G Warning! Make sure R AdBlue ® does not come into contact with skin, eyes, or clothing R to keep AdBlue ® out of the reach of children If you and/or others have come into contact with AdBlue ® : R If AdBlue ® has gotten into contact with eyes, flush with plenty of water immediately and seek medical help.
X Pull dust cap off of AdBlue ® refill container = . X Place AdBlue ® refill container = on the filler neck as illustrated and tighten it moderately (hand-tight) by turning it clockwise. ! Make sure to tighten the AdBlue ® refill container only moderately, i.
Risk of explosion. Fire, open flames and smoking are prohibited when handling batteries. Avoid creating sparks. Battery acid is caustic. Do not allow it to come into contact with skin, eyes or clothing. Wear suitable protective clothing, especially gloves, apron and faceguard.
The factory-equipped battery may only be replaced with a battery that R has the same security features R is of identical size R is of identical voltage R is of identical capacity ! As any other battery, the battery may discharge if you do not operate the vehicle for an extended period of time.
Never lean over batteries while connecting or jump starting. You might get injured. Battery fluid contains sulfuric acid. Do not allow this fluid to come in contact with eyes, skin or clothing. In case it does, immediately flush affected area with water, and seek medical help if necessary.
Position C represents the charged battery of another vehicle or an equivalent starter pack. X Flip up cover : of positive terminal = in direction of arrow. ! Never invert the terminal connections! X Connect positive terminal ; of charged battery C with positive terminal = with a jumper cable.
may be towed with all wheels on the ground only so far as necessary to have the vehicle moved to a safe location where the recommended towing methods can be employed. ! Before towing the vehicle observe the following instructions: R Do not tow-start the vehicle.
Removing cover in rear bumper G Warning! In order to avoid possible serious burns or injury, use extreme caution when removing the rear cover, because the rear exhaust pipe is extremely hot. X Press mark on cover : as indicated by the arrow. X Lift cover : off to reveal the threaded hole for the towing eye bolt.
X Make sure the ignition is switched on. X With the vehicle at a standstill, depress the brake pedal and keep it pressed. X Shift the automatic transmission into neutral position N . X Release the brake pedal. X If engaged, release the parking brake. X Switch on the hazard warning flasher ( Y page 101).
X Turn off the engine. X Remove the SmartKey from the starter switch. X Vehicles with KEYLESS-GO: Open the driver’s door (this puts the starter switch in position 0 , same as with the SmartKey removed from the starter switch). The driver’s door then can be closed again.
Fuse box in cargo compartment X Opening: Open the cargo compartment. X Insert a suitable object such as a coin into the slot of lock : . X Turn lock : by 90° in direction of arrow.
358 X164_AKB; 5; 31, en-US d2ureepe, Version: 2.11.8.1 2009-09-11T12:30:16+02:00 - Seite 358.
Vehicle equipment ............................ 360 Parts service ..................................... 360 Warranty coverage ........................... 360 Identification labels .......................... 360 Vehicle specification GL 350 Blue- TEC (164.
Vehicle equipment i This Operator’s Manual describes all features, standard or optional, potentially available for your vehicle at the time of purchase. Please be aware that your vehicle might not be equipped with all features described in this manual.
The Vehicle Identification Number (VIN) can be found R on certification label : on the driver’s door B-pillar R on passenger side underneath the second- row seat ( Y page 361) R on the lower edge of the windshield ( Y page 361) Example certification label (U.
Vehicle specification GL 350 BlueTEC (164.825) The quoted data apply only to the standard vehicle. Contact an authorized Mercedes- Benz Center for the corresponding data of all special bodies and special equipment. Engine GL 350 BlueTEC Engine, type 642 Mode of operation Diesel 4-stroke engine No.
Engine GL 450 No. of cylinders 8 Bore 3.66 in (92.90 mm) Stroke 3.39 in (86.00 mm) Total piston displacement 284.5 cu in (4 663 cm 3 ) Compression ratio 10.
Engine GL 550 Engine, type 273 Mode of operation 4-stroke engine, gasoline injection No. of cylinders 8 Bore 3.86 in (98.00 mm) Stroke 3.56 in (90.50 mm) Total piston displacement 333.2 cu in (5 461 cm 3 ) Compression ratio 10.7:1 Output acc. to SAE J 1349 30 382 hp/6 000 rpm (285 kW/6 000 rpm) Maximum torque acc.
Rims and tires Notes ! Only use tires which have been tested and approved by Mercedes-Benz. Tires approved by Mercedes-Benz are developed to provide best possible performance in conjunction with the driving safety systems on your vehicle such as the ABS or the ESP ® .
your vehicle. For more information contact an authorized Mercedes-Benz Center. 366 Rims and tires Technical data X164_AKB; 5; 31, en-US d2ureepe, Version: 2.
Same size tires Model GL 350 BlueTEC GL 450 GL 550 19" wheels Rims (light alloy) Wheel offset 8.5 J x 19 H2 2.20 in (56 mm) 8.5 J x 19 H2 2.20 in (56 mm) All-season tires 35,36 275/55 R19 111H M+.
Spare wheel ! Compare the recommended tire inflation pressure for your vehicle with the tire inflation pressure on the yellow label located on the spare wheel rim.
Model Capacity Fuels, coolants, lubricants, etc. Engine with oil filter GL 350 BlueTEC 9.0 US qt (8.5 l) Approved engine oils GL 450 GL 550 9.5 US qt (9.0 l) Automatic transmission All models 9.5 US qt (9.0 l) MB Automatic Transmission Fluid Front axle All models 1.
Model Capacity Fuels, coolants, lubricants, etc. Air conditioning system All models — R134a refrigerant and special PAG lubricant oil (never R 12) Washer system and headlamp cleaning system All models 7.
Engine oil additives ! Do not blend oil additives with engine oil. They may damage the engine. Damage or malfunctions resulting from blending oil additives are not covered by the Mercedes- Benz Limited Warranty. Air conditioning refrigerant R134a (HFC) refrigerant and special PAG lubricating oil are used in the air conditioning system.
TBA can be used provided the ratio of any one of these oxygenates to gasoline does not exceed 10%; MTBE must not exceed 15%. The ratio of methanol to gasoline must not exceed 3% plus additional cosolvents. Using mixtures of ethanol and methanol is not allowed.
vehicles are not covered by the Mercedes- Benz Limited Warranty or by any pre-owned or Extended Limited Warranties. AdBlue ® AdBlue ® is a non-flammable, non-toxic, colorless and odorless, water-soluble liquid. ! Only use AdBlue ® complying with ISO 22241.
If the antifreeze mixture is effective to -35‡ (-37†), the boiling point of the coolant in the pressurized cooling system is reached at approximately 266‡ (130†). The coolant solution must be used year round to provide the necessary corrosion protection and increase boil-over protection.
Washer system and headlamp cleaning system G Warning! Washer solvent/antifreeze is highly flammable. Do not spill washer solvent/ antifreeze on hot engine parts, because it may ignite and burn. You could be seriously burned. X Use MB Windshield Washer Concentrate “MB SummerFit”.
376 X164_AKB; 5; 31, en-US d2ureepe, Version: 2.11.8.1 2009-09-11T12:30:16+02:00 - Seite 376.
Service and Literature Your authorized Mercedes-Benz Center has trained technicians and Genuine Mercedes- Benz Parts to service your vehicle properly. For expert advice and quality service, contact an authorized Mercedes-Benz Center.
Order no. 6515 4318 13 Part no. 164 584 15 83 Edition B 2010 É1645841583&ËÍ 1645841583 X164_AKB; 5; 31, en-US d2ureepe, Version: 2.11.8.1 2009-09-11T12:30:16+02:00 - Seite 378.
Ein wichtiger Punkt beim Kauf des Geräts Mercedes-Benz 2010 GL350 BlueTEC (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Mercedes-Benz 2010 GL350 BlueTEC noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Mercedes-Benz 2010 GL350 BlueTEC - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Mercedes-Benz 2010 GL350 BlueTEC reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Mercedes-Benz 2010 GL350 BlueTEC erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Mercedes-Benz 2010 GL350 BlueTEC besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Mercedes-Benz 2010 GL350 BlueTEC verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Mercedes-Benz 2010 GL350 BlueTEC. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Mercedes-Benz 2010 GL350 BlueTEC gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
