Benutzeranleitung / Produktwartung 2010 3 4-Door des Produzenten Mazda
Zur Seite of 484
Black plate (1,1) Mazda3_8AD2-EA-08K_Edition1 Page1 Thursday , October 9 2008 1:4 PM Form No.8AD2-EA-08K.
Black plate (2,1) Mazda3_8AD2-EA-08K_Edition1 Page2 Thursday , October 9 2008 1:4 PM Form No.8AD2-EA-08K.
Black plate (3,1) Thank you for choosing a Mazda. W e at Mazda design and buil d vehicles with complete customer satisfact ion in mind. T o help ensure enjoyable and trouble-free operation of your Mazda, read this manua l carefully and follow its recommendations.
Black plate (4,1) W e want to help you get the most driving pleasure from your vehicle. Y our owner's manual, when read from cover to cover, can do that in many ways. Illustrations compleme nt the words of the manual to best explain how to enjoy your Mazda.
Black plate (5,1) Mazda3_8AD2-EA-08K_Edition1 Page5 Thursday , October 9 2008 1:4 PM Form No.8AD2-EA-08K T able of Contents Y our V ehicle at a Glance Interior , exterior views and part identification of your Mazda. 1 Essential Safety Equipment Use of safety equipment, including seats, seat belt system, child-restraint systems and SRS air bags.
Black plate (6,1) Mazda3_8AD2-EA-08K_Edition1 Page6 Thursday , October 9 2008 1:4 PM Form No.8AD2-EA-08K.
Black plate (7,1) 1 Y our V ehicle at a Glance Interior , exterior views and part identification of your Mazda. Interior Overv iew .................................. ..................................... ... 1-2 Interior Equipment (V iew A) ..........
Black plate (8,1) Interior Equipment (V iew A) Door-lock knob ........................ .................................................. ........................ page 3-31 Power door lock switch .......................... ............................
Black plate (9,1) Interior Equipment (V iew B) Audio control switches ............ .............................. ............................................ page 6-56 SRS air bags ............................ ........................................
Black plate (10,1) Interior Equipment (V iew C) Seat belts .............................. .................................. ................................... ......... page 2-16 SRS air bag .............................. ...........................
Black plate (1 1,1) Front (4 Door) Hood ............... ........................................ ................................... ........................ page 3-46 W indshield wiper blades ..........................................................
Black plate (12,1) Rear (4 Door) T runk lid .............................. ................................................. ............................. page 3-37 Rear window antenn a ............................. ...................................
Black plate (13,1) Front (5 Door) Hood ............... ........................................ ................................... ........................ page 3-46 W indshield wiper blades ...........................................................
Black plate (14,1) Rear (5 Door) Rear wipe r blade ............... ..................................... ................................... ......... page 8-28 Liftgate .................................................................................
Black plate (15,1) 2 Essential Safety Equipment Use of safety equipment, including seats, seat belt system, child-restraint systems and SRS air bags. Seats ........................................... ................................... ...............
Black plate (16,1) Front Seats (Manually Operated Seats) WARNING Do not modify or replace the front seats: Modifying or repla cing the front seats such as replacing the upholstery or loosening any bolts is dangerous. The front seats conta in air bag components ess ential to the supplemental restraint system.
Black plate (17,1) q Seat Recline WARNING Do not drive with either front seat reclined: Sitting in a reclin ed position while the vehicle is moving is dangerous because you do not get the full protection from seat belts. During sudden braking or a collision, you can slide under the lap belt and suffer seriou s internal injur ies.
Black plate (18,1) CAUTION When returni ng a rear-reclined seatback to its upright position, make sure you hold onto the seatback with your other hand whi le operating the lever. If the sea tback is not supported, it will flip forward suddenly and could cause injury.
Black plate (19,1) CAUTION Ø The seat-bottom power adjustment is ope rated by motors. Avoid extended operation becaus e excessive use can damage the motors. Ø To prevent the battery from running down, avoid using the power adjustment when the engine is stoppe d.
Black plate (20,1) q Height Adjustment (Driver's Seat) The seat height can be adjus ted by moving the switch up or down. q Seat Position Memory One-touch seat position programming and activation is avail able on the drive r's seat. CAUTION When activating the seat position, do not place your han ds or fingers around the seat bottom.
Black plate (21,1) Operation using the seat-side buttons Programming Park the vehicle in a safe location before performing the seat posit ion programming.
Black plate (22,1) With retractable type key Lock button Unlock button Operation indicator light Programming One seat position can be progra mmed into each advanced key/retrac table type key . After the following condit ions have been met, operate the seat and the advanced key/retractabl e type key to program the seat positions.
Black plate (23,1) NOTE Memory will also be erased if any of the following operations ar e performed: l The advanced key/retractable type key code has been changed. Refer to Immobilizer System (with Advanced Key) on page 3-49. Refer to Immobilizer System (without Advanced Key) on page 3-52.
Black plate (24,1) Never allow a passenger to sit or stand on the folded seatback while the vehicle is moving: Driving with a passenger on the folded seatback is dangerou s. Allowing a child to sit up on the folded seatback while the vehicle is moving is particu larly dangerou s.
Black plate (25,1) q Split-Folding Rear Seatback T o fold the seatbacks CAUTION When operatin g the rear seatback knob, make sure you supp ort the seatback with your hand. If the seatback is not supported with you r hand, it will flip forw ard suddenly and could cause injury to the finger that pushes the rear seatback knob down.
Black plate (26,1) q Armrest The rear armrest in the center of the rear seatback can be used (no occupant in the center seat) or placed upright. Head Restraints Head restraints are intended to help protect you and the passengers from neck injury .
Black plate (27,1) Rear seat Removal/Installat ion T o remo ve the head restraint, pull it up while pressing the stop-catch. T o install the head restraint, press the uprights into the holes while pressing the stop-catch.
Black plate (28,1) NOTE l The active head restraints operate in a r ear-end collision. The head r estraints r eturn to their original position after the collision. l The method for adjusting the active head r estraints is the same as a normal head r estraint.
Black plate (29,1) WARNING Ø Be careful when using the seat warmer. The heat from the seat warmer may be too hot for some people, as ind icated belo w, and could cause a low-temperature burn.
Black plate (30,1) Seat Belt Precautions Seat belts help to decrease the possibility of severe injury during acciden ts and sudden stops. Mazda recommends that the driver and all passengers always wear seat belts. All of the seat belt retractors are designed to keep the lap/shoulder belts out of the way when not in use.
Black plate (31,1) WARNING Always wear your seat belt and ma ke sure all occu pants are properly restrained: Not wearing a seat belt is extremely dangerous. During a collis ion, occupa nts not wearing seat belts could hit someone or things ins ide the veh icle or even be thrown out of the vehicle .
Black plate (32,1) CAUTION Belt retraction may become diffic ult if the belts and rings are soiled, so try to keep them clean. For more details about cleaning the seat belts, refer to “ Cleaning the Lap/Shoulder Belt Webbing ” (page 8-60).
Black plate (33,1) q Automatic Locking Mode Always use the automatic locking mode to keep the child-restraint system from shifting to an unsafe position in the event of an acciden t. T o enable seat belt automatic locki ng mode, pull it all the way out and connect it as instructed on the child-restrai nt system.
Black plate (34,1) Seat Belt q Fastening the Seat Belt 1. Grasp the seat belt tongue. 2. Slowly pull out the lap/shoul der belt. Seat belt tongue Lap/shoulder belt 3. Insert the seat belt tongue into the seat belt buckle unti l you hear a click sound.
Black plate (35,1) q Unfastening the Seat Belt Depress the button on the seat b elt buckle. If the belt does not fully retr act, pull it out and check for kinks or twists. Then make sure it remains untwis ted as it retracts. Button NOTE If a belt does not fully retract, inspect it for kinks and twists.
Black plate (36,1) Front Seat Belt Pr etensioner and Load Limiting Systems For optimum protection, the driver and front passenger seat belts are equipp ed with pretensioner and load limiting systems. For both these syst ems to work properly you must wear the seat belt properly .
Black plate (37,1) Do not modify the components or wiring, or use elect ronic testing devic es on the pretensioner system: Modifying the componen ts or wiring of the pretensioner system, including the use of electronic testing devices is dangerous.
Black plate (38,1) q Air Bag/Front Seat Belt Pretensioner System W arning Beep If a malfunction is detected in the air bag/ front seat belt pretensioner systems and the warning light, a warning beep sound will be heard for about 5 seconds every minute.
Black plate (39,1) WARNING Do not use a seat belt extender unless it is necessar y: Using a seat belt extender when not necessary is dangerous. The sea t belt will be too long and not fit properly. In an accident, the seat belt will not provide adequate protection and you could be seriously injured.
Black plate (40,1) Seat Belt W arning Light/ Beep The seat belt war ning light ill uminates and a beep sound will be heard if the driver's seat belt is not fastened when the ignition is switch ed ON. Conditions of operat ion Condition Result The driver's seat belt is not fastened when the ignition is switched ON.
Black plate (41,1) Driver seated/Front passenge r seated The seat belt war ning function reminds the front passenger to fasten the seat belt according to the chart below .
Black plate (42,1) Child Restraint Precautions Mazda strongly urges the use of child-restraint systems for children smal l enough to use them. Y ou are requi red by law to use a child-restraint system for children in the U.
Black plate (43,1) WARNING Use the correct size child -restraint system: For effective protection in vehicle accidents and sudden stops, a child must be properly restrain ed using a seat belt or child-restraint system depending on age and size. If not, the child could be seriously injured or even killed in an accident .
Black plate (44,1) Do not install a front -facing child -restraint system on the front passenger seat unless it is unavoidable: In a collision, th e force of a deploying air bag could cause serious injury or death to the child.
Black plate (45,1) Do not allow a child or anyone to lean over or against the side window of a vehicle with side and cur tain air bags: It is dangerous to allow anyone to lean over or against the side.
Black plate (46,1) Installing Child-Restraint Systems Accident statist ics reveal that a child is safer in the rear seat. The front passenger's seat is clear ly the worst choice for any child under 12, and with rear-facing child- restraint systems it is clearly unsafe due to air bags.
Black plate (47,1) 4. T o get the retractor into the automatic locking mode, pull the shoulder belt portion of the seat belt until the entire length of the belt is out of the retractor . 5. Push the child-restraint system firmly into the vehicle seat.
Black plate (48,1) Anchor bracke t location (5 Door outboard position) T ether strap position (5 Door outboard position) Forw ard T ether strap Anchor bracke t locat ion (5 Door center position) T ether strap position (5 Door center position) T ether strap 7.
Black plate (49,1) WARNING Use the tether and tether anchor only for a child-restrain t system: Using the tether or tether anchor to secure anything but a child-restrain t system is dangerou s. Th is could weaken or damage the tether or tether ancho r and resu lt in injury.
Black plate (50,1) WARNING Always move the front passenger seat as far back as poss ible if installin g a front-facing child-res traint system on it is unavoidable: As your vehicle has front air bags .
Black plate (51,1) 2. Secure the child-restraint system with the lap portion of the lap/shoulder belt. See the manufacturer's instructions on the child-restraint system for belt routing instructions.
Black plate (52,1) WARNING Do not seat a child in a child-restraint system on the front passenger seat if the front passeng er air bag deactivation indicat or light does not illuminate: While it is al.
Black plate (53,1) LA TCH Child-Restraint Systems Y our Mazda is equipped with LA TCH lower anchors for attachmen t of speci ally designed LA TCH child-res traint systems in the rear seat. Both anchors must b e used, other wise the seat will bounce around and put the child in danger .
Black plate (54,1) q LA TCH Child-Restraint System Installation Procedure (Rear Outboard Seats) 1. Make sure the seatback is secure ly latched by pushing it bac k until it is fully locked. 2. Expand the area between the seat bottom and the seatback slightly to verify the locations of the LA TCH lower anchors.
Black plate (55,1) Anchor bracke t location (5 Door) T ether strap position (5 Door) Forw ard T ether strap 6. Install the head restraint. Refer to Head Restraints on page 2-12.
Black plate (56,1) q LA TCH Child-Restraint System Installation Procedure (Rear Center Seat) The LA TCH lower anchors at the center of the rear seat are much furt her apart than the sets of LA TCH lower anchors for child-restraint system installation at other seating positions.
Black plate (57,1) 3. Secure the child-restraint system using BOTH LA TCH lower anchors, following the chil d-restraint syst em manufacturer's instruct ions.
Black plate (58,1) Supplemental Restraint System (SRS) Precautions The front and side supplementa l restraint systems (SRS) incl ude 6 air bags. Please verify the air bags equipped on your vehicle by locating the “ SRS AIRBA G ” location indicators.
Black plate (59,1) WARNING Seat belts must be worn in air bag equipped vehicles: Depending only on the air bags fo r protection during an accident is dangerous.
Black plate (60,1) Sit in the center of the seat and wear seat belts properly: Sitting too close to the side air bag modules or pla cing hands on them, or sleeping up against the door or hanging out the windows is ext remely dangerous.
Black plate (61,1) Do not touch the components of the supplem ental restraint system after the air bags have inflated: Touching the components of the supplemental restraint system after the air bags have inflated is dangerous. Immedia tely after inflation, they are very hot.
Black plate (62,1) Supplemental Restraint System Components Driver/Front passenger dual stage inflator s and air bags Crash sensor, and diagnostic module (SAS unit) Front seat belt pretensioner and lo.
Black plate (63,1) How the SRS Air Bags W ork Y our Mazda is equipped with the follow ing types of SRS air bags. SRS air bags are designed to wor k together with the seat belts to help to reduce injuries during an accide nt. The SRS air bags are designed to provide furt her protectio n for passengers in addition to the seat belt functions.
Black plate (64,1) q Front Passenger Air Bag The front passen ger air bag is mount ed in the front passenger dashboard. The inflation mecha nism for the front passenger air bag is the same as the driver's air bag, as mentioned above.
Black plate (65,1) q Curtain Air Bags The curtain air bags are mounted in the front and rear window pillars, an d the roof edge along both sides. When the air bag crash sensors detect a side impact of.
Black plate (66,1) WARNING Never tamper with the air bag/pretensio ner systems and always have an Auth orized Mazda Dealer per form all servicing and repairs: Self-ser vicing or tam pering with the systems is dangerous. An air bag/preten sioner could accidentally activa te or become disab led causing serious injur y or death.
Black plate (67,1) SRS Air Bag Deployment Criteria This chart indicates the appli cable SRS equipm ent that will deploy dependi ng on the type of collision.
Black plate (68,1) Limitations to SRS Air Bag In severe collisions such as those descri bed previously in “ SRS Air Bag Deploym ent Criteria ” , the applicable SRS air bag equipment will deploy . However, in some accidents, the equipment may not deploy depending on the type of collision and its severi ty .
Black plate (69,1) Roll-over Essential Safety Equipment SRS Air Bags 2-55 Mazda3_8AD2-EA-08K_Edition1 Page69 Thursday , October 9 2008 1:5 PM Form No.8AD2-EA-08K.
Black plate (70,1) Driver and Front Passenger Occupant Classification System First, please read “ Suppleme ntal Restraint System (SRS) Precautions ” (page 2-44) carefully . q Driver Seat Slide Position Sensor Y our vehicle is equipped with a driver seat slide position sensor as a part of the supplemental restraint system.
Black plate (71,1) Front passenger air bag deactivation indicator light This indicator light illumina tes to remind you that the front passenger front and side air bags and seat belt pretensioner will no t deploy during a collision.
Black plate (72,1) WARNING Do not decrease the total seated weight on the front passenger seat: When an adult or large child sits on the front passenger seat, decreasing the total seated weight on the front passenger seat from the total seated weight of approximately 42 kg (93 lbs) required for air bag deployment is dang erous.
Black plate (73,1) Do not increase the total seated weig ht on the front passenger seat: When an infant or small child sits on the front passenger seat, increasing the total seated weight on the front passenger seat from the total seated weight of approximately 30 kg (66 lbs) is dangerou s.
Black plate (74,1) NOTE l The system r equir es about 10 seconds to alternate between turning the fr ont passenger fr ont and side air bags and seat belt pr etensioner system on or off.
Black plate (75,1) Monitoring and Maintenance q Constant Monitoring The following compo nents of the air bag systems are monitored by a diagnostic system: l Crash sensors, and diagnosti c module (SAS .
Black plate (76,1) WARNING Do not operate a vehicle with damaged air bag/seat belt pretensio ner system components: Expended or damag ed air bag/seat belt pretensioner system components must be replaced after any collision which caused them to deploy or damage them.
Black plate (77,1) 3 Knowing Y our Mazda Explanation of basic operations and controls; opening/closing and adjustment of various parts. Advanced Keyless Ent ry and Start System ................................ 3-2 Advanced Keys í ....................
Black plate (78,1) Advanced Keys í The advanced keyless funct ions (advanced keyless entry and start system) enables the following operations while the advanced key is being carried (page 3-7). l Locking/unlocking the doors and the liftgate, and opening the liftgate, and opening the trunk lid, without operating the key .
Black plate (79,1) Lock button Operation indicator light Auxiliary ke y K ey code number plate Unlock button T runk b utton (4 door) Panic b utton A code number is stamped on the plate attac hed to the key set; detach this plate and store it in a safe place (not in the vehicle) for use if you need to make a replacement key .
Black plate (80,1) CAUTION Ø Because the adva nced key uses low-inte nsity radio waves, it may not funct ion correctly under the following conditions: Ø The advanced key is carried with comm unication devices such as cellular phones. Ø The advanced key contacts or is covered by a metal object.
Black plate (81,1) q Advanced Key Maintenance CAUTION Ø Make sure the batte ry is installed with the corre ct pole facing upward. Battery leakage could occur if it is not installed correctly. Ø When replacing the battery, be careful not to bend the electrical terminals or get oil on them.
Black plate (82,1) 3. Insert the flathead screw driver into the gap between the cover and the transmitter, and then rotate the screwdriver to detach the cover . 4. Remove the battery cap, then remove the battery . 5. Insert a new battery with the positive pole facing up, and then cover the battery with the battery cap.
Black plate (83,1) CAUTION Ø Be careful not to allow the rubber ring shown in the figure to be scratched or damag ed. Ø If the rubber ring detache s, reattach it before inserting a new battery. Rubber ring q Service If you have a problem with the advanced keyless functions, consult an Authorized Mazda Dealer .
Black plate (84,1) 5 door (Locking) Operational range Exterior transmitter 5 door (Unlocking) Operational range Exterior transmitter NOTE The system may not operate if you ar e too close to the windows, door handles, or liftgate. Opening the liftgate/ trunk lid The operational range for opening the liftgate/trunk lid is an area of up to 80 cm (2.
Black plate (85,1) NOTE l The luggage compartment/trunk is out of the operational range, however , starting the engine may be possible. l The engine may not start if the advanced key is placed in the .
Black plate (86,1) T o unlock Driver's door request switch T o unlock the driver's door , press the request switch. A beep sound will be heard twice and the hazard war ning lights will flash twice. T o unlock all doors and the liftgat e, press the request switch again within 5 seconds and two more beep sounds will be heard.
Black plate (87,1) q Opening the Liftgate/T runk Lid A locked liftgat e/trunk lid can also be opened while the advanced key is being carried. Raise the liftgate/t runk lid by press ing the electric liftgat e/trunk lid opener while carrying the advanced key .
Black plate (88,1) Ignition positions Each time the push button start is pressed, the ignition swi tches in the order of off, ACC, and ON. Pressi ng the push butt on start again from ON switches the ignition off. Indicator light Indicator light (A CC) Indicator light (ON) NOTE l The or der in which the ignition is switched can be changed.
Black plate (89,1) ON This is the norm al running position after the engine is started. The indicator light (ON) turns off. (The indicator light (ON) illuminates when the ignition is switched ON and the engine is not running.) The warning lights (except brakes) should be inspected before the engine is started (page 5-39).
Black plate (90,1) CAUTION If the KEY warnin g light (red) illuminates, and the push button start indicator light (red) illuminates , this could indicate a problem with the engine start ing system and the inability to start the engine or switch the ignition to ACC or ON.
Black plate (91,1) NOTE l After starting the engine, the push button start indicator lights (ACC and ON) turn off and the ignition is in the ON position.
Black plate (92,1) 2. (Manual transaxle) Shift into neutral. (Automatic transaxle) Shift the shift lever to the P position. 3. Press the push button start to turn off the engine. CAUTION When leaving the vehicle, make su re the push butto n start is press ed to off .
Black plate (93,1) T ransmitter Lock button Unlock button T runk b utton (4 door) Operation indicator light Panic b utton NOTE l (U.S.A.) This device complies with Part 15 of the FCC Rules.
Black plate (94,1) NOTE l All doors and the liftgate cannot be locked when any door or the liftgate is open. l Confirm that all doors and the liftgate are locked visually or audibly by use of the double click. Unlock button T o unlock the driver's door , press the unlock button.
Black plate (95,1) q Auxiliary Key Function Use the auxil iary key stored in the advanced key in the event of a dead transmitter batte ry or mal function.
Black plate (96,1) W arning Lights and Beep Sounds q System Malfunction W arning Light If any malfunct ion occurs in the advanced keyless function, the KEY warning light (red) in the instrum ent clust er illuminates continuously .
Black plate (97,1) q Request Switch Inoperable W arning Beep If the request switch for a front door is pressed under the follo wing condition s while the advanced key is being carried, a beep will be heard six times to indicate that the front do ors cannot be locked.
Black plate (98,1) q Advanced Key Left-in-vehicle W arning Beep If an advanced key is left in the vehicle cabin and all the doors are locked using a separate advanced key , a beep sound is heard for about 10 seconds to remind the driver that the advanced key has been left in the vehicle cabin.
Black plate (99,1) When W arning Indicator/Beep is Activated Under the following conditions, warning beeps are heard and a warning/indicator light in the instrument cluster illumi nates to notify the driver of improper ope ration of the advanced key to prevent theft of the vehicle (page 3-20).
Black plate (100,1) Keys WARNING Do not leave the key in your vehicle with children and keep them in a place where your children will not find or play with them: Leaving children in a vehicle with the key is dangerous. This could resu lt in someone being badly injured or even killed.
Black plate (101,1) Key extend/retract method (Retractable type key) T o extend the key , press the release button. T o retr act the key , rotate it into the holder while pressing the release button. Keyless Entry System í This system remotely locks and unlocks the doors and the liftgate, and opens the trunk lid.
Black plate (102,1) NOTE l The keyless entry system is designed to operate up to about 2.5 m (8 ft) fr om the center of the vehicle, but this may vary due to local conditions. l The system does not operate when the key is in the ignition switch. l Doors and the liftgate can be locked by pr essing the lock button while any other door is open.
Black plate (103,1) T o confi rm that all doors and the liftgate have been locked, press the lock button again within 5 seconds . If they are close d and locked, the horn wi ll sound. The system can be set not to sound the horn. Refer to Personalization Features on page 10-9.
Black plate (104,1) NOTE T o open the trunk when the ignition is switched to a position other than off, use the r emote r elease lever inside the vehicle (page 3-38). Panic button If you witnes s from a distance someone attempting to break into or damage your vehicle, pressing the panic button will activate the vehicle's alarm.
Black plate (105,1) 2. Insert a screwdriver into the slot and push the tab to remo ve the key from the transmitter . Ta b 3. Insert a screwdriver into the slot and gently pry open the transmitter . 4. Remove the battery . 5. Put in the new battery (CR1620 or equivalent) with the positive pole ( ) facing down.
Black plate (106,1) q Service If you have a problem with the keyless entry system, consult an Authori zed Mazda Dealer . If your transmitte r is lost or stolen, bring all remaining transmitters to an Authorized Mazda Dealer as soon as possible for a replacemen t and to make the lost or stolen transmitter inoper ative.
Black plate (107,1) q Locking, Unlocking with Key The driver's door can be locked /unlocked with the key . T urn the key toward the front to lock, toward the back to unlock. Lock Unlock NOTE If your vehicle is equipped with a fr ont passenger door key cylinder , the door can be locked/unlocked with the key .
Black plate (108,1) T o lock the front passenger door with the door-lock knob from the outside, push the door-lock knob to the lock position and close the door . This does not operate the other door locks. Door-lock knob NOTE l (W ith advanced key) The driver's door cannot be locked using the door-lock knob fr om the outside.
Black plate (109,1) Locking, unlocking with door -lock switch All doors and the lif tgate lock automatically when lock side is pressed. They all unlock when unlock side is pressed.
Black plate (1 10,1) q Rear Door Child Safety Locks These locks are intended to help prevent children from accide ntally opening the rear doors. Use them both whenever a child rides in the vehicle. If you slide the child safety lock to the lock position before c losing that door, the door cannot be opened from the inside.
Black plate (1 1 1,1) q Locking, Unlocking with T ransmitter (with Advanced Key) The liftgate can be locked /unlocked by operating the keyles s entry system transmitter, refer to Keyless Entry System (page 3-16).
Black plate (1 12,1) When the lif tgate cannot be opened If the vehicle battery is dead or there is a malfunction in the electrical system and the liftgate cannot be unlock ed, perform the following procedu re as an emergency measure to unlock it: 1. Fold down the rear seatbacks.
Black plate (1 13,1) Luggage compartment cover strap The luggage compartment can be accessed by openin g the liftgate when the straps are atta ched to the sides of the liftgate. Strap Luggage compartment cover This cover can be removed for more room. T o do this, just unfasten the straps; then lift and pull it out.
Black plate (1 14,1) q Opening and Closing the T runk Lid WARNING Close the trunk lid, be sure the seat backs are latched and do not allow children to play inside the vehicle: Leaving the trunk lid open or leaving children in the vehicle with the keys is dangerous.
Black plate (1 15,1) Opening the trunk lid with the remote release lever Pull up the release lever next to the driver's seat. Release le ver Closing the trunk lid Use both hands to push the trunk lid down until the lock snaps shut. Do not slam it.
Black plate (1 16,1) WARNING Close the trunk lid, be sure the seat backs are latched and do not allow children to play inside the vehicle: Leaving the trunk lid open or leaving children in the vehicle with the keys is dangerous. Children could open the trunk lid and climb inside resulting in possible injury or death from heat exposure.
Black plate (1 17,1) Power Windows The ignition must be ON for the power windows to operat e. WARNING Make sure the opening is clear before closing a window: Closing power windows are dangerous. A person's hands, head, or even neck could be caught by the window and result in serious injur y or even death.
Black plate (1 18,1) NOTE If the battery was disconnected during vehicle maintenance, or for other reasons such as a switch continues to be operated after the window is fully open/close, the window will not fully open and close automatically . Carry out the following procedur e to r esume operation: 1.
Black plate (1 19,1) T o open the window to the desir ed position, hold down the switch . T o close the window to the desired position, press the upper part of the switch. Open Close q Power Window Lock Switch W ith the lock switch in the unlock ed position (button not depres sed), all power windows on each door can be operated.
Black plate (120,1) Fuel-Filler Lid and Cap WARNING When removing the fue l-filler cap, loosen the cap slightly and wait for any hissing to stop. Then remove it: Fuel spray is dangerous.
Black plate (121,1) q Fuel-Filler Cap T o remo ve the fuel-filler cap, turn it counterclockwise. T o close the fuel-filler cap, turn it clockwise until two or more click sounds are heard. Open Close CAUTION If the check fuel cap warning light illuminates, the fuel-filler cap may not be properly installed.
Black plate (122,1) Hood WARNING Always check that the hood is closed and securely locked: A hood that is not closed and securely locked is dangerous as it could fly open while the vehicle is moving and block the driver's vision which could result in a serious accident.
Black plate (123,1) Moonroof The moonroof can be opened or closed electrically only when the ignition is switched ON. Slide switch T ilt switch WARNING Do not let passen gers stand up or extend par t .
Black plate (124,1) T o close to the desired position , press the front of the slide switch or pull the tilt switch. Close T ilt do wn (Close) Open q Power Moonroof Re-set Procedur e If the battery is disco nnected, the moonroof may not operat e correctly .
Black plate (125,1) Immobilizer System (with Advanced Key) The immobilizer system allows the engine to start only with an advance d key the system recognizes. If someone attempts to start the engine with an unrecognized advanced key , the engine will not start, there by helping to prevent the theft of your vehicle.
Black plate (126,1) NOTE l (U.S.A.) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interfer ence r eceived, including interfer ence that may cause undesir ed operation.
Black plate (127,1) NOTE l The engine may not start and the security indicator light may illuminate or flash if the advanced key is placed in an ar ea wher e it is difficult for the system to detect the signal, such as on the dashboard, or in the glove box.
Black plate (128,1) Immobilizer System (without Advanced Key) The immobilizer system allows the engine to start only wi th a key the system recognizes. If someone attempts to start the engine with an unrecognized key , the eng ine will not start, thereby helping to prevent the theft of your vehicle.
Black plate (129,1) NOTE l (U.S.A.) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interfer ence r eceived, including interfer ence that may cause undesir ed operation.
Black plate (130,1) NOTE l If the security indicator light illuminates and stays on or flashes when the ignition switch is turned to the ON position, the engine will not start. l Signals fr om a TV or radio station, or from a transceiver or a mobile telephone, could interfer e with your immobilizer system.
Black plate (131,1) l (Without advanced key) Switching the ignition ON wi thout the key . (With advanced key) Switching the ignition ON wi thout using the push butt on start.
Black plate (132,1) NOTE Locking the doors with the inside door-lock knob will not arm the system. 3. After 20 seconds, the system is fully armed. NOTE l Auto re-lock function After unlocking with the.
Black plate (133,1) l (With advanced key) l Press a reques t switch on the doors. l Press the electric liftgate/trunk lid opener . l Press the unlock button or press and hold the trunk button on the transmitter . l The engine is started with the push button start.
Black plate (134,1) Steering Wheel WARNING Never adjust the steering wheel while the vehicle is moving: Adjusting the steering wheel while the vehicle is moving is dangerous. Moving it can very easily cause th e driver to abrup tly turn to th e left or right.
Black plate (135,1) 2. Depress the mirror switch in the appropriate direction. Selector switch Mirror switch After adjusting the mirror , lock the control by placing the selector switch in the middle position. Folding the mirror Fold the outside mirror rearward until it is flush with the vehicle.
Black plate (136,1) NOTE For the manual day/night mirror , perform the adjustment with the day/night lever in the day position. Reducing glare from headli ghts Manual day/night mirror Push the day/night lever forward for day driving. Pull it back to reduce glare of headlights from ca rs at the rear .
Black plate (137,1) NOTE l Do not use glass cleaner or suspend objects on or ar ound the light sensor . Otherwise, light sensor sensitivity will be affected and may not operate normally . Light sensor Light sensor l The auto-dimmer function is canceled when the ignition is switched ON and the shift lever/selector lever is in r everse (R).
Black plate (138,1) 3-62 Mazda3_8AD2-EA-08K_Edition1 Page138 Thursday , October 9 2008 1:5 PM Form No.8AD2-EA-08K.
Black plate (139,1) 4 Before Driving Y our Mazda Important information about driving your Mazda. Fuel and Engine Exhaust Precautions ........................................ 4-2 Fuel Requirements .......................................................
Black plate (140,1) Fuel Requirements V ehicl es with catal ytic convert ers or oxygen sensors must use ONL Y UNLEADE D FUEL, which will reduce exhaust emissions and keep spark plug fouling to a minimum. Y our Mazda will perfor m best with fuel listed in the table.
Black plate (141,1) Emission Control System Y our vehicle is equipp ed with an emission con trol system (the catalytic convert er is part of this system) that enables your vehicle to compl y with existing exhaust emissions requirements.
Black plate (142,1) Engine Exhaust (Carbon Monoxide) WARNING Do not drive your vehic le if you sme ll exhaust gas in side the vehicle: Engine exhaust gas is dangerous. This gas contain s carbon monoxide (CO), which is colorless, odorless, and poisonous.
Black plate (143,1) Before Getting In l Be sure the windows, outside mirrors , and outside lights are clean. l Inspect inflation pressures and condition of tires. l Look under the vehicle for any sign of fluid leaks. l If you plan to back up, make sure nothing is in your way .
Black plate (144,1) Break-In Period No special break- in is necess ary , but a few precautions in the first 1,000 km (600 miles) may a dd to the perfor mance, economy , and life of your Mazda. l Do not race the engine . l Do not maintain one constant speed, either slow or fast, for a long period of time.
Black plate (145,1) Hazardous Driving WARNING Be extremely careful if it is necessa r y to downshift on slipp er y sur faces: Downshifting into lower gear while driving on slippery sur faces is dangerous. The sudden change in tire speed could cause the tires to skid.
Black plate (146,1) Rocking the V ehicle WARNING Do not spin the wheels at more than 56 km/h (35 mp h), and do not allow anyone to stand behin d a wheel when pushing the vehicle: When the vehicle is stuck, spinni ng the wheels at high spe ed is dangerous.
Black plate (147,1) q Snow Tires Use snow tires on all four wheels Do not go fast er than 120 km/ h (75 mph) while driving with snow tires. Inflate snow tires 30 kP a (0.3 kgf/cm 2 , 4.3 psi) more than recommende d on the tire pressure label (driver's door frame), but never more than the maximum cold-tir e pressure shown on the tires.
Black plate (148,1) Driving In Flooded Area WARNING Dr y wet brakes by drivin g ver y slowly and applying the brakes lightly until brake per formanc e returns to normal: Driving with wet brakes is dangerous. Increase d stoppin g distance or the vehicle pullin g to one side when braking could result in a serious accide nt.
Black plate (149,1) Driving on Uneven Road Y our vehicle' s suspension and underbody can be damaged if driven on rough/uneven roads or over speed bumps at excessive speeds. Use care and reduce speed when traveling on rough/uneven roads or over speed bumps.
Black plate (150,1) T railer T owing The Mazda3 is not designed for towing. Never tow a trailer with your Mazda3 . 4-12 Before Driving Y our Mazda T owing Mazda3_8AD2-EA-08K_Edition1 Page150 Thursday , October 9 2008 1:5 PM Form No.
Black plate (151,1) 5 Driving Y our Mazda Explanation of instruments and controls. Starting and Driv ing ............... ..................................... ................. 5-2 Ignition Switch ............... ......................................
Black plate (152,1) Ignition Switch With advanced key Refer to “ Starting the engine (page 3-11) ” for information on how to use the ignition switch. q Ignition Switch Positions (Without Advanced Key) LOCK The steering wheel locks to protect against theft .
Black plate (153,1) WARNING Remove the key only when the vehicle is parked: Removing the key from the ignition switch while the vehicle is moving is dangerous. Removing the key allows the steering wheel to lock. You will lose steering contr ol and a serious accident could occ ur.
Black plate (154,1) Starting the Engine With advanced key Refer to “ Starting the engine (page 3-11) ” for information on how to start the engine .
Black plate (155,1) Brake System q Foot Brake Y our Mazda has power-assisted brakes that adjust automati cally through normal use. Should power-assist fail, you can stop by applying greater force than normal to the brake pedal. But the dist ance required to stop will be great er than usual.
Black plate (156,1) q Parking Brake WARNING Before leaving the drive r's seat, always switch the ignition off, set the parking brake, and make sure the shift lever is in P (automatic transax le) .
Black plate (157,1) q Brake System W arning Light This warning has the following functions: Parking brake warning The light illu minates when the parking brake is applied with the ignition switched to ST AR T or ON. It turns off when the parking brake is fully released.
Black plate (158,1) WARNING Do not rely on ABS as a substitute for safe driving: The ABS canno t compensate for unsafe and reckless driving, excessive speed, tailgating (followi ng another vehicle too clos ely), driving on ice and snow, and hy droplaning (re duced tire friction and road contact because of water on the road sur face ).
Black plate (159,1) WARNING Do not drive with both the ABS warning light and brake warning light illuminated. Have the vehicle towed to an Authorized Mazda Dealer to have the brakes inspected as soon as possible: Driving when the brake system warning ligh t and ABS warning light are illuminated simulta neously is dangerous.
Black plate (160,1) (6-speed transaxle) V ehicl es with 6-spee d transaxle are equipped with a device to prevent shifting to R (reverse) by mis take. Push the shift lever downwar d and shift to R.
Black plate (161,1) Downshifting When you must slow down in heavy traffic or on a steep upg rade , downshift before the engine star ts to overwork. This reduces the c hance of stalling and gives better acceleration when you need more speed. On a steep downgrade , downshifting helps maintain safe speed and prolongs brake life.
Black plate (162,1) Automatic T ransaxle Controls Indicates that you must depress the brake pedal to shift (The ignition must be switched to ACC or ON).
Black plate (163,1) q T ransaxle Ranges The shift lever must be in P or N to operate the star ter . P (Park) P locks the transaxle and prevents the front wheels from rotating.
Black plate (164,1) q Active Adaptive Shift (AAS) Active Adaptive Shift (AAS ) automatically contr ols the transaxle shif t points to best suit the road conditions and driver input.
Black plate (165,1) q Manual Shift Mode This mode gives you the feel of drivi ng a manual transaxle vehicle by operating the shift lever and allows you to contr ol engine rpm and torqu e to the front wheels much like a manual transaxle when more control is desired.
Black plate (166,1) Shifting Manually Shiftin g up (M1 → M2 → M3 → M4 → M5) T o shif t up to a higher gear, tap the shift lever back ( ) once. NOTE l When driving slowly , the gears may not shift up depending on vehicle speed. l In manual shift mode, gears do not shift up automatically .
Black plate (167,1) Second gear fixed mod e When the shift lever is tapped back ( ) while the vehicle is stopped or driven at about 10 km/h (6 mph) or less, the transaxle is set in the second gear fixed mode. The gear is fixed in second while in this mode for easier starting and driving on slippery roads.
Black plate (168,1) Downshifting When you must slow down in heavy traffic or on a steep upg rade , downshift before the engine star ts to overwork. This gives better acceler ation when you need more speed. On a steep downgrade , downshifting helps maintain safe speed and prolongs brake life.
Black plate (169,1) If the light stays illuminated after the engine is started or illuminates while driving, turn off the engine after parking in a safe place, and then start the engine again. If the light does not illuminate after restarting the engine , this indicates that the power steering is restored and normal steering is possible.
Black plate (170,1) q Activation/Deactivation T o acti vate the system, press the ON switch. T o deacti vate the syst em, press the OFF switch. (T ype A) (T ype B) WARNING Always turn off the cruise c.
Black plate (171,1) NOTE l Release the cruise contr ol switch at the desir ed speed, otherwise the speed will continue incr easing while the switch is pr essed up, and continue decr easing while it is pressed down (except when the accelerator pedal is depr essed).
Black plate (172,1) Y our vehicle has a tap-up feature that allows you to incre ase your current speed in increments of 1.6 km/h (1 mph) by a momentary tap of the cruise control SET switch. Multipl e taps will increase your vehicle speed 1.6 km/ h (1 mph) for each tap.
Black plate (173,1) NOTE Accelerate if you want to speed up temporarily when the cruise contr ol is on. Gr eater speed will not interfere with or change the set speed. T ake your foot off the accelerator to r eturn to the set speed. q T o Decrease Cruising Speed T ype A Press down the cruise control SET - switch and hold it.
Black plate (174,1) (T ype A) (T ype B) q T o Cancel T o cancel the system, use one of these methods: l Press the OFF switch . l Slightly depress the brake pedal. l Depress the clutch pedal (Manual transaxle only). l Press the CANCEL switch. (T ype A) (T ype B) The system turns off when the ignitio n is off.
Black plate (175,1) T raction Control System (TCS) í The T raction Control System (TCS) enhances traction and safety by controlling engine torque and braki ng. When the TCS detects driving wheel slippage, it lowers engine torque and operates the brakes to prevent loss of traction.
Black plate (176,1) Dynamic Stability Control (DSC) í The Dynamic Stability Control (DSC) automatically contr ols braking and engine torque in conjunctio n with systems such as ABS and TCS to help control side slip when driving on slippery surfa ces, or during sudden or evasive maneuvering, enhancing vehicle safet y .
Black plate (177,1) q DSC OFF Indicator Light This indicator light stays on for a few seconds when the igni tion is switched ON. It also illumi nates when the DSC OFF switch is pressed and TCS/DSC is switched off (page 5-27). If the light stays on when the TCS/DSC is not switched off, take your vehicle to an Authorized Mazda Dealer .
Black plate (178,1) Tir e Pressur e Monitoring System í The tire pressure monitoring system (TPMS) monitors the pressure for each tire. If tire pressure is too low in one or more tires, the system will inform the driver via the warning light in the instrument panel and by the warning beep sound.
Black plate (179,1) CAUTION Ø Each tire, inclu ding the spare (if provided), shou ld be checked mon thly when cold and inflated to the inflation pressu re recommended by the vehicle manufactu rer on the vehicle placard or tire inflation pressu re label.
Black plate (180,1) q Tir e Pressure Monitoring System W arning Light This warning light illumi nates for a few seconds when the igni tion is switched ON. Thereafter, the warning light illumi nates and a beep is heard when tire pressure is too low in one or more tires, and flashes when there is a system malfunct ion.
Black plate (181,1) Adjust the tire pressure to the correct tire pressure. Refer to the specification charts (page 10-8). CAUTION When replacing/repai ring the tires or wheels or both, have the work done by an Authorized Mazda Dealer, or the tire pressure sensors may be damaged.
Black plate (182,1) If the warning ligh t illuminates again even after the tire press ures are ad justed, there may be a tire puncture. Replace the punctured tire with the temporary spare tire (page 7-9). NOTE A tir e pr essur e sensor is not installed to the temporary spar e tir e.
Black plate (183,1) 3. After about 15 minutes, drive the vehicle at a speed of at least 25 km/h (16 mph) for 10 minutes and the tire pressure sensor ID signal code will be registered autom atically .
Black plate (184,1) Meters and Gauges (Black-out meter) When the ignition is switched ON, the dashboard gauges illuminate. Speedometer ................................... ................................... ............................. ... page 5-35 Odometer , T rip Meter and T rip Meter Select or .
Black plate (185,1) q Speedometer The speedometer indicates the speed of the vehicle. q Odometer , T rip Meter and T rip Meter Selector The display mode can be changed between tri p meter A and trip meter B by pressing the selec tor while one of them is displayed.
Black plate (186,1) For instance, trip meter A can record the distance from the point of origin, and trip meter B can record the distance from where the fuel tank is filled. When trip meter A is selected, pressing the selector again within one second will change to trip meter B mode.
Black plate (187,1) q Fuel Gauge The fuel gauge shows approxi mately how much fuel is remaining in the tank when the ignition switch is in the ON position. W e recommend keeping the tank over 1/4 full. If the gauge indicates that the fuel level is near E, refuel as soon as possible.
Black plate (188,1) T o cancel the illumination dimmer, press the dashboard illumination knob. NOTE l This symbol ( ) indicates the knob to adjust the brightness of the dashboard illumination.
Black plate (189,1) W arning/Indicator Lights W arning/Indicator lights will appear in any of the highlighted areas Signal W arning/Indicator Lights Page Brake System W arning Light 5-41 Charging Syst.
Black plate (190,1) Signal W arning/Indicator Lights Page Low Fuel W arning Light 5-45 Check Fuel Cap W arning Light 5-45 Seat Belt W arning Light/Beep 5-45 Door-Ajar W arning Light 5-46 Low W asher F.
Black plate (191,1) Signal W arning/Indicator Lights Page Lights-On Indicator Light 5-53 Power Steering Malfunction Indicator Light 5-53 T urn Signal/Hazard W arning Indicator Lights 5-53 q Brake Syst.
Black plate (192,1) q ABS W arning Light The warning light stays on for a few seconds when the igni tion is switched ON. If the ABS warning light stays on while you're driving, the ABS control unit has detected a syst em malfunct ion. If this occurs, your brakes wi ll function norm ally as if the vehicle had no ABS .
Black plate (193,1) q Charging System W arning Light This warning light illumi nates when the ignition is switch ed ON and turns off when the engine is started. If the warning ligh t illuminates while driving, it indicates a malfunction of the alternator or of the charging system.
Black plate (194,1) The check engine light may illuminate in the following cases: l The fuel tank level being very low or approaching empty . l The engine's electrical system has a problem. l The emission contr ol system has a problem. l The fuel-filler cap is missin g or not tightened securely .
Black plate (195,1) q Low Fuel W arning Light This warning light signals that the fuel tank will soon be empty . Refuel as soon as possible. q Check Fuel Cap W arning Light This warning light illumi nates for a few seconds when the igni tion is switched ON.
Black plate (196,1) Once the beep sound is heard, it continues sounding even if the vehicle speed lowers to 20 km/h (12 mph) or less until the seatbelt is fastened or the beep sound period has passed.
Black plate (197,1) q Automatic T ransaxle W arning Light This warning light stays on for a few seconds when the igni tion is switched ON. The light illu minates when the transaxle has a problem. CAUTION If the automatic transax le warning light illuminates, the transaxle has an electrical prob lem.
Black plate (198,1) Adjust the tire pressure to the correct tire pressure. Refer to the specification charts (page 10-8). CAUTION When replacing/repai ring the tires or wheels or both, have the work done by an Authorized Mazda Dealer, or the tire pressure sensors may be damaged.
Black plate (199,1) If the warning ligh t illuminates again even after the tire press ures are ad justed, there may be a tire puncture. Replace the punctured tire with the temporary spare tire (page 7-9). NOTE A tir e pr essur e sensor is not installed to the temporary spar e tir e.
Black plate (200,1) l Under the follow ing condition s, the KEY warning light (red) will flash continuously when the push button start has not been pressed off to notify the driver that the advanced key has been removed.
Black plate (201,1) The light stops flashing when the ignition is switched ON with the correct ignition key . At this time, the immobi lizer syst em is disarmed and the light illuminates for about 3 seconds and then turns off.
Black plate (202,1) If the light stays on, the TCS or DSC may have a malfunction and they may not operate correctly . T ake your vehicl e to an Authorized Mazda Dealer . q DSC OFF Indicator Light í This indicator light stays on for a few seconds when the igni tion is switched ON.
Black plate (203,1) Cruise Main Indicator Light (Amber) The indicator ligh t illuminates amber when the ON switch is pressed and the cruise control system is activated. Cruise Set Ind icator Light (Green) The indicator ligh t illuminates green when a cruising speed has been set.
Black plate (204,1) When operating the hazard warning lights, both turn signal indicator lights flash (page 5-68). NOTE If an indicator light r emains illuminated (does not flash) or if it flashes abnormally , one of the turn signal bulbs may be burned out.
Black plate (205,1) q Seat Belt W arning Beep If the driver's seat belt is not fastened when the ignition is switched ON, a beep sound will b e heard for about 6 seconds.
Black plate (206,1) Lighting Control q Headlights T ype A (Without AUTO position) T urn the headlight switch to turn the headlights, other exterior lights and dashboard illuminati on on or off.
Black plate (207,1) CAUTION Ø Do not shade the light sensor by adhering a sticker or a label on the windshield. Otherwis e the light sensor will not operate correctly . Light sensor Ø The light senso r also works as a rain sensor for the auto-wiper control.
Black plate (208,1) NOTE If the headlights flicker , or the brightness weakens, the bulb-life may be depleted and a r eplacement is necessary . Consult an Authorized Mazda Dealer . q Lights-On Reminder If lights are on and the key is removed from the ignition switch , a continuous beep sound will be heard when the driver's door is opened.
Black plate (209,1) Select the proper setting from the following chart. Front seat Rear seat Load Switch Position Driver Passenger × ―― ― 0 ×× ―― 0 ×× × ― 1 ×× × × 2 × ―― ×.
Black plate (210,1) Pressing the AFS OFF switch again turns off the AFS OFF indicator light and turns on the AFS. q Daytime Running Lights (Canada) In Canada, vehicles must be driven wi th the headlights on during dayti me operation. For that reason, the daytime running lights automatically turn on when the ignition is switched ON.
Black plate (21 1,1) NOTE l If an indicator light stays on without flashing or if it flashes abnormally , one of the turn signal bulbs may be burned out. l A personalized function is available to change the number of flashes.Refer to Personalization Featur es on page 10-9.
Black plate (212,1) Windshield W ipers and W asher The ignition must be swi tched ON. WARNING Use only windshield washer fluid or plain water in the reservo ir: Using radiator antif reeze as washer fluid is dangerous. If sprayed on the windshield, it will dirty the windshield, affect your visibility, and could result in an accident.
Black plate (213,1) V ariable-speed intermitt ent wipers í Set the lever to INT and choose the interval timing by rotating the ring. INT ring T ype B (With AUTO position) T urn the wipers on by pulling the lever down. AUTO ― Auto control LO ― Low speed HI ― High speed For a single wip ing cycle, press the lever up to MIST .
Black plate (214,1) CAUTION Ø Do not shade the rain sensor by adhering a sticker or a label on the windshield. Otherwis e the rain sensor will not operate correctly .
Black plate (215,1) NOTE l Switching the auto-wiper lever from the OFF to the AUTO position while driving at a vehicle speed of 4 km/h (2 mph) or higher (or after driving the vehicle) activates the windshield wipers once, after which they operate accor ding to the rainfall amount.
Black plate (216,1) Rear Window W iper and W asher (5 Door) The ignition switch must be in the ON position. q Rear Window W iper T urn the wiper o n by turni ng the rear wiper/washer switch. ON ― Normal INT ― Intermittent q Rear Window W asher T o spray washer flui d, turn the rear wiper/ washer switch to the position.
Black plate (217,1) Manual T ype Air -Conditioning Indicator light CAUTION Do not use sharp instruments or window cleaners with abrasives to clean the ins ide of the rear window sur face. They may damage the defroster grid insi de the window. NOTE This defr oster is not designed for melting snow .
Black plate (218,1) Hazard W arning Flasher The hazard warning ligh ts should always be used when you stop on or near a roadway in an emergency . The hazard warning ligh ts warn other drivers that your vehicle is a traffic hazard and that they must take extreme caution when near it.
Black plate (219,1) 6 Interior Comfort Use of various features for drive comfort, including air-conditioning and audio system. Climate Control System .......................... 6-2 Operating T ips .................................... 6-2 V ent Operation .
Black plate (220,1) Operating Tips q Operating the Climate Control System Operate the climate control system with the engine running. NOTE T o prevent the battery fr om being dischar ged, do not leave the fan control dial on for a long period of time with the ignition in ON when the engine is not running.
Black plate (221,1) V ent Operation q Adjusting the V ents Directing airflow Side V ents T o adjus t the direction of airflow , open the vents and rotate them left and right . Push Center V ents T o adjus t the direction of airflow , move the adjustment kno b.
Black plate (222,1) q Selecting the Airflow Mode Dashboar d V ents Dashboar d and Floor V ents Floor V ents Defr oster and Floor V ents Defr oster V ents 6-4 Interior Comfort Climate Control System Mazda3_8AD2-EA-08K_Edition1 Page222 Thursday , October 9 2008 1:6 PM Form No.
Black plate (223,1) T ypes of the Climate Control System Manual type and fully automati c type climate control systems are explained separately . Check your vehicl e's climate control type and read the appropriate pages. Manual T ype ............
Black plate (224,1) Manual T ype í T emperature control dial Fan control dial Mode selector dial Air intake selector A/C switch Some models. q Control Switches T emperature control dial Cold Hot This dial controls temperature. T urn it clockwise for hot and counterclockwise for cold.
Black plate (225,1) Mode selector dial T urn the mode selector dial to select airflow mode (page 6-4). NOTE l The mode selector dial can be set at the intermediate positions ( ) between each mode. Set the dial to a intermediate position if you want to slightly adjust the airflow amount.
Black plate (226,1) Recirculated air mode (indi cator light illuminated) Outside air is shut off. Air withi n the vehicle is recirculated. This mode can be used when driving on a dusty road o r in similar cond itions. It also helps to provide quicker cooling of the interior .
Black plate (227,1) CAUTION If the air conditioner is used while driving up lon g hills or in he avy traffic, monitor the engine coolant temperature warning light to see if it is illuminated or flashing (page 5-44). The air conditioner may cause engine overheating.
Black plate (228,1) q Dehumidifying (With Air Conditioner) í Operate the air condit ioner in cool or cold weather to help defog the windshield and side windows. 1. Set the mode selector dial to the desired position. 2. Set the air intake selector to the outside air mode.
Black plate (229,1) Fully Automatic T ype í Climate control information is displayed on the information display . Inf ormation display A/C T emperature setting display (dri ver) T emperature setting .
Black plate (230,1) q Control Switches AUTO switch By pressing the AUTO swi tch the following functions will be automatically controlled in accordan ce with the selec ted set temperature: l Airflow te.
Black plate (231,1) Mode selector switch The desired airflow mode can be selec ted (page 6-4). NOTE l W ith the airflow mode set to the position and the temperatur e contr ol dial set at a medium temperature, heated air is dir ected to the feet and a comparably lower air temperatur e will flow thr ough the central, left and right vents.
Black plate (232,1) WARNING Do not use the position in cold or rainy weather: Using the position in cold or rainy weather is dangerous as it will cause the windows to fog up.
Black plate (233,1) 2. Use the temperature control dial to select a desir ed temperature. Press the DU AL switch or turn the front passenger temperature control dial to control the set temperature individually for the driver and front passenger . T o turn off the system, press the OFF switch.
Black plate (234,1) q Sunlight/T emperature Sensor The fully automatic air conditioner function measures inside and outside temperatures, and sunlight. It then sets temperatures inside the passen ger compartment accordingly . CAUTION Do not obstruct either sensor, otherwise the auto matic air conditioner will not operate properly .
Black plate (235,1) Antenna q Antenna (4 Door) AM/FM Radio Antenna The AM/FM radio antenna receives both AM and FM signals. The AM/FM radio antenn a is in the rear window . CAUTION When washin g the inside rear window, use a soft cloth dampened in lukewarm water , gently wipin g the antenna lines.
Black plate (236,1) NOTE When leaving your vehicle unattended, we r ecommend that you r emove the antenna and stor e it inside the vehicle. Operating Tips for Audio System WARNING Do not adjust the au.
Black plate (237,1) q Radio Reception AM characteristics AM signals bend around such things as buildings or mountains and bounce off the ionosphere. Therefor e, they can reach longer distances than FM signals. Because of this, two stations may sometime s be picked up on the same freque ncy at the same time.
Black plate (238,1) Flutter/Skip noise Signals from an FM transmitter move in straight lines and becom e weak in valleys between tall buildings, mount ains, and other obstacles. When a vehicle passes through such an area, the recept ion conditions may change suddenly , resulting in annoying noise.
Black plate (239,1) q Operating Tips for CD Player/In- Dash CD Changer Condensation phenomenon Immediately after turning on the heater when the vehicle is cold, the CD or optical components (prism and lens) in the CD player/In-dash CD changer may become clouded with condensation.
Black plate (240,1) l A new CD may have rough edges on its inner and outer perimeters. If a disc with rough edges is used, proper setting will not be possible and the CD player/In-dash CD changer will not play the CD. In addit ion, the disc may not eject resulting in a malfunction.
Black plate (241,1) l Insert discs one by one. If two discs are inserted at the same time, the system may not operate proper ly . l The CD player/In-dash CD changer ejects the CD if the CD is inserted upside down. Also dirt y and/or defective CDs may be ejected.
Black plate (242,1) l This unit handles MP3 files conforming to the MP3 format containing both header frames and data frames. l This unit can play multi-session recorded discs that have up to 40 sessions. l This unit can play MP3s with samplin g frequencies of 16/22.
Black plate (243,1) l A single disc wi th up to 512 files can be played and a single folder with up to 255 files can be played. l When naming an MP3 file, be sure to add an MP3 file extension (.mp3) after the file name. l The maximum number of characters that can be used for file names is as follows.
Black plate (244,1) Bit rate Refers to the volum e of data per second, expressed in bps (bits per second). Generally , the larger the number of the transfer bit rate when compressing an MP3 file, the more information regard ing musical reproduction it carries, and therefore the better the sound quality .
Black plate (245,1) Audio Set Audio information is displayed on the information display . CD Player In-Dash CD Changer Power/V olume/Sound Con trols ................... ................................... ........................ page 6-28 Operating the Radio .
Black plate (246,1) q Power/V olume/Sound Controls Po wer/V olume dial Audio control dial Power ON/OFF Switch the ignitio n to ACC or ON. Press the power/volum e dial to turn the audio system on. Press the power/volum e dial again to turn the audio system off.
Black plate (247,1) Standard audio-equipped model *1 *1 *1 *1 *2 Bose Sound System-equipped model *1 *1 *1 *1 *1 *2 *1 Depending on the mode selected, the indication changes.
Black plate (248,1) Bose ® Sound System-equipped model Indication T urn Left T urn Right OFF ON OFF ON Decrease bass Increase bass Decrease treble Increase treble Shift the sound to the front Shift t.
Black plate (249,1) * AudioPilot ® 2 (Bose ® Sound System- equipped model) AudioPilot ® 2 automaticall y adjusts audio volume and sound quality in accordance with the level of noise entering the vehicle interior while driving.
Black plate (250,1) q Operating the Radio Channel preset buttons Seek tuning buttons Manual tuning dial Band selector buttons Scan button Channel preset buttons Auto memory button Radio ON Press a band selector button ( , )t o turn the radio on. Band selection Choose AM by pressing the AM butt on ( ) and FM by pressing the FM button ( ).
Black plate (251,1) NOTE If you continue to press and hold the button, the fr equency will continue changing without stopping. Scan tuning Press the scan butt on ( )t o automatically sample strong stations . Scanning stops at each station for about 5 seconds.
Black plate (252,1) q Operating the Satellite Radio Channel preset buttons Seek tuning buttons Manual tuning dial Category button Band selector buttons Scan button Channel preset buttons T ext/Electro.
Black plate (253,1) NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to pr ovide r easonable pr otection against harmful interfer ence in a r esidential installation.
Black plate (254,1) How to subscribe to satellit e radio Once the system is installed you must first subscribe to the SIRIU S Radio service to activate the system.
Black plate (255,1) Every time the satelli te button is pressed, the bank changes in the order shown below . SR2 SR1 SR3 NOTE SR1, SR2 and SR3: six stations can be stor ed in each bank for convenient access to your favorite stations.
Black plate (256,1) Preset channel programming (Programming with “ channel number ” display) 1. Select the desired channel to be programmed. At this point, the following is displayed: [SR (bank number) (channel number)] 2. Keep pressing the channel preset button for 1.
Black plate (257,1) Channel selection within a category If category is not in “ ALL ” and the channel numbe r is displayed, turning the manual tuning dial moves the channel number up/down in the present category .
Black plate (258,1) l The long name is displ ayed first, and three seconds late r the short name is displayed. If there is no short name, the long name is displayed. l T o display the rest of the characters of the category name, press the text button (TEXT).
Black plate (259,1) When the seek tuning butt on ( )i s pressed (about 1.5 seconds), playba ck starts from the beginning of the current program. When the seek tuning butt on ( )i s pressed twice, playback starts from the beginning of the previous program.
Black plate (260,1) (Master code input determination) 5. Determ ine the mast er code which has been input b y pressing the auto memory button (scan button). 6. “ PIN CLEARED ” appears whi ch indicates that the master code input has been completed.
Black plate (261,1) (V erification with the registered ID code) 5. Determ ine the input code by pressing the auto memory button (scan button). 6. If it does not match with the previously registered code, “ SR1 Err ” is displ ayed and then it retur ns to “ SR1 - - - - ” .
Black plate (262,1) 8. If it matches the registered code, “ SR1 LOCK ” appears for three seconds which indicates that the code input has been completed. 9. “ SR1 LOCK 100 ” appears whi ch indicates that the parental lock is activated. At this time, mute is on and no sound is heard.
Black plate (263,1) Error signs (1) Depending on the surro unding conditions (such as large trees, buildings, or tunnels) and special weather conditions, the reception of SIRIUS radio wave s may be decreased or tem porarily interrupt ed. “ ACQUIRING ” may appear .
Black plate (264,1) q Operating the Compact Disc (CD) Player T rack do wn/Re v erse button T rack up/F ast- forward b utton CD eject button CD slot CD play button Display button Folder do wn button Fo.
Black plate (265,1) Fast-forward/Reverse Press and hold the fast -forward button ( ) to advance throu gh a track at high speed. Press and hold the revers e button ( )t o reverse through a track at high speed. T rack search Press the track up button ( ) or turn the file dial clockwise once to skip forward to the beginning of the next track.
Black plate (266,1) (CD random) 1. Press the random button ( ) during playback, and then press the button again within 3 seconds to play the tracks on the CD randomly . “ DISC RDM ” is displayed. 2. Press the button again to cancel the random playback.
Black plate (267,1) Message display If “ CHECK CD ” is displayed, it means that there is some CD malfunction. Check the CD for damage, dirt, or smudges, and then properly reins ert. If the message appears again, take the unit to an Authorized Mazda Dealer for service.
Black plate (268,1) q Operating the In-Dash CD Changer T rack up/F ast-forward b utton CD eject button Display button Load button Channel preset buttons Channel preset buttons T rack do wn/Re v erse b.
Black plate (269,1) Multiple insert ion 1. Press and hold the load button ( ) for about 2 seconds until a beep sound is heard. 2. When “ IN ” is displayed, insert the CD.
Black plate (270,1) Press and hold the revers e button ( )t o reverse through a track at high speed. T rack search Press the track up button ( ) or turn the file dial clockwise once to skip forward to the beginning of the next track.
Black plate (271,1) (CD random) 1. Press the random button ( ) during playback, and then press the button again within 3 seconds to play the tracks on the CD randomly . “ DISC RDM ” is displayed. 2. Press the button again to cancel the random playback.
Black plate (272,1) Message display If “ CHECK CD ” is displayed, it means that there is some CD malfunction. Check the CD for damage, dirt, or smudges, and then properly reins ert. If the message appears again, take the unit to an Authorized Mazda Dealer for service.
Black plate (273,1) q Error Indications If you see an error indication on the display , find the cause in the chart. If you cannot clear the error indication, take the vehicle to an Authorized Mazda Dealer . Indication Cause Solution CHECK CD CD is inserted upside down Insert the CD properly .
Black plate (274,1) Audio Control Switch Operation í When the audio unit is turned on, operation of the audio unit from the steering wheel is possible. NOTE Because the audio unit will be turned off under the following conditions, the switches will be inoperable.
Black plate (275,1) Without Bluetooth Hands- Free and navigation system With Bluetooth Hands- Free only/ Bluetooth Hands- Free and navigation system q Changing the Source Press the mode switch ( ) to .
Black plate (276,1) NOTE CD, CD changer , SIRIUS digital satellite radio, and BT audio modes cannot be selected in the following cases: · SIRIUS digital satellite radio unit, or BT audio unit is not equipped on the audio system. · CD has not been inserted.
Black plate (277,1) q Mute Switch í Press the mute switch ( ) once to mute audio, press it again to resume a udio output. NOTE If the ignition is turned off (LOCK) with the audio muted, the mute will be canceled. Ther efor e, when the engine is r estarted, the audio is not muted.
Black plate (278,1) NOTE l Befor e using the auxiliary jack, read the manufactur er's instructions for the product being connected. l Use a commer cially-available, non- impedance (3.5 ) ster eo mini plug for connecting the portable audio unit to the auxiliary jack.
Black plate (279,1) 3. Press the AUX button ( ) of the audio unit or the mode switch ( ) of the audio control switches on the steering wheel to change to the AUX mode.
Black plate (280,1) Safety Certification This CD player is made and tested to meet exacting safet y standards. It meets FCC requirements and complies with safety perfor mance standards of the U.S. Department of Health and Human Services. CAUTION Ø This CD player should not be adjusted or repair ed by anyone excep t qualified ser vice personnel.
Black plate (281,1) Bluetooth Audio í q What is Bluetooth Audio? Bluetooth audio ou tline By programming porta ble audio device s equipped with the Blu etooth communication function to the vehicle's Bluetooth unit, you can listen to music or audio recorded on these audio devices from the vehicle's speakers.
Black plate (282,1) NOTE l It may not be possible to play a Bluetooth audio device if it is placed anywher e transmission is compr omised, such as inside a metal container or the trunk. Move the Bluetooth audio device to a location wher e transmission is possible.
Black plate (283,1) Bose Sound System-equipped model *1 *1 *1 *1 *1 *2 *1 Depending on the mode selected, the indication changes. *2 Depending on the model, this function, may not be available. 2. Turn the audio control dial and select a desired mode.
Black plate (284,1) NOTE l Always perform Bluetooth audio device pr ogramming while the vehicle is stopped. l If a Bluetooth device has alr eady been pr ogrammed to the vehicle as a hands-free mobile phone, it does not need to be pr ogrammed again when using the device as a Bluetooth audio device.
Black plate (285,1) NOTE l Some Bluetooth audio devices need a certain amount of time before the “ ” symbol is displayed. l If the pr ogramming failed, “ Err ” flashes for thr ee seconds then it r eturns to “ P AIR DEVICE ” . l Pr ogramming cannot be performed while the vehicle is moving.
Black plate (286,1) Changing the link to a Bluetooth audio device If several devices have been programmed, the Bluetooth unit links the device last programmed. If you would like to link a different programmed de vice, it is necessary to change the link.
Black plate (287,1) NOTE l Some Bluetooth audio devices need a certain amount of time before the “ ” symbol is displayed. l If a hands-fr ee type mobile phone has been the most r ecently pr ogrammed device, the Bluetooth unit links this device.
Black plate (288,1) 7. Press the audio control dial to d elete the selected device. NOTE Select “ GO BACK ” and pr ess the audio contr ol dial to r eturn to the “ P AIR DELETE ” display . 8. “ P AIR DELETED ” is displayed for 3 seconds after the deletion is completed, and then it retur ns to the normal display .
Black plate (289,1) 2. Turn on the Bluetooth audio device's power . Make sure that the “ ” symbol is displayed in the information display . The symbol is not displayed if an unprogrammed Bluetooth audio device is being used or the vehicle's Bluetooth unit has a malfunction.
Black plate (290,1) Bluetooth Hands-Free í q What is Bluetooth Hands-Free? Bluetooth Hands- Free Outline By connecting a Blueto oth equipped device (Mobile phone) to the hands-free unit equipped on t.
Black plate (291,1) l OPP (Object Push Profile) V er . 1.1 Bluetooth is the registered trademark of Bluetooth SIG. Inc. NOTE l If the ignition is turned off (LOCK) during a hands-fr ee call, the line is transferr ed to the device (Mobile phone) automatically .
Black plate (292,1) Information display When available, the informat ion display shows telephone numbe rs, Bluetooth Hands-Free messages, and operation status. Microphone The microphone is used for speaking voice commands or exchanging conversation. Microphone Audio unit The audio unit is used for adjusting the volume.
Black plate (293,1) Please be aware that the voice recognition may error despite following the above points. q Function Restrictions While Using Bluetooth Hands-Free Some functions are limited while Bluetooth Hands-Free is being used. They include: l Beep sound and voice guidance related to the audio unit are not heard.
Black plate (294,1) Basic Bluetooth Hands- Free Operation q Bluetooth Hands-Free Pr eparation Language setting The available languages are English, Spanish, and Canadian French. If the language setting is changed, all of the voice guidance and voice input commands are done in the selected language.
Black plate (295,1) A maximum of seven devices including hands-free mobile phones and Bluetooth audio devices can be programm ed to one vehicle. NOTE l A device can be pr ogrammed only when the vehicle is parked. If the vehicle starts to move, the pairing procedur e will end.
Black plate (296,1) 18. Say : [Beep] “ XXXX - - - ” (Speak a “ device tag ” , an arbitrary name for the device.) Example: “ Stan's device. ” NOTE Speak a pr ogrammed “ device tag ” within 10 seconds. If mor e than two devices ar e to be pr ogrammed, they cannot be programmed with the same or similar “ device tag ” .
Black plate (297,1) q Receiving an Incoming Call 1. Prompt : “ Incoming call, press the pickup button to answer ” . 2. T o accept the call, press the pick-up button. T o rejec t the call , press the hang-up button. q Hanging Up a Call Press the hang-up butt on during the call .
Black plate (298,1) Convenient Use of the Hands-Free System q Phonebook Usage Phonebook registration Phone numbers can be registered to the Bluetooth Hands-Free phoneboo k. NOTE Do this function only when parked. It is too distracting to attempt while driving and you may make too many err ors to be effective.
Black plate (299,1) 7. Prompt : “ X (Number of locations which include data) numbers have been imported. What name would you like to use for these numbers? ” 8. Say : [Beep] “ XXXXX... (Ex. “ Mary's phone ” ) ” (Say a voice tag for the name registered.
Black plate (300,1) q Refusing an Incoming Call For incoming call refusal, refer to “ Receiving an incoming call ” (page 6-79). q Mute The microphone can be muted during a call. 1. Press the talk button with a short press. 2. Say: [Beep] “ Mute ” 3.
Black plate (301,1) Three-way call function 1. Press the talk button with a short press. 2. Say : [Beep] “ Join call ” 3. Prompt : “ Joining calls ” Making a call using a telephon e number 1. Press the talk button with a short press. 2. Say : [Beep] “ Dial ” 3.
Black plate (302,1) 8. Say: [Beep] “ Home ” (Say the registered location to be edited: “ Home ” , “ W ork ” , “ Mobile ” ,o r “ Other ” ). 9. Prompt: “ XXXXX... (Ex. “ Mary's phone ” ) (Registered voice tag) XXXX (Ex. “ home ” ) (Registered locat ion).
Black plate (303,1) 5. Prompt: “ Are you sure you want to erase everything from your Hands Free system phonebook? ” 6. Say: [Beep] “ Ye s ” 7. Prompt: “ Y ou are about to delete everything from your Hands Free system phonebook. Do you want to continue? ” 8.
Black plate (304,1) Hands-Free Setting q Device Device registration For the registration of a Bluetooth equipped device to Bluetooth Hands-Free, refer to “ Blueto oth Hands-Free preparation ” (page 6-76). Registered device read-out Bluetooth Hands-Free can read-out the devices registere d to its system.
Black plate (305,1) 3. Prompt: “ Select one of the foll owing: Pairing options, confirmat ion prom pts, language, passcode, select phone or select music player . ” 4. Say: [Beep] “ Select phone ” 5. Prompt: “ Please say 1 for XXXXX... (Ex. device A), 2 for XXX XX.
Black plate (306,1) NOTE Say “ All ” to delete all devices (Mobile phone). 9. Prompt: “ Deleting XXXXX... (Ex. device B...) (Regis tered device tag). Is this correct? ” 10. Say: [Beep] “ Ye s ” 11 . Prompt: “ Deleted ” Registered device editing 1.
Black plate (307,1) 2. Prompt: “ Hands-Free system is locked. State the passcode to continue. ” 3. Say: [Beep] “ XXXX ” (Say the set passcode “ PCode ” .) 4. If the correct passcode is input, voice guidance “ XXXXXX... (Ex. “ Mary's device) (Device tag) is connect ed ” is announced.
Black plate (308,1) q V oice Recognition Learning Function (Speaker Enrollment) The voice recognition learn ing function enables voice recognition appropriate to the characteristics of the user's voice.
Black plate (309,1) 7. The voice guidance reads out the voice input command number (refer to the voice input comm and list for voice recognition learn ing). (Ex. “ Please read phrase 1 ” ) 8. Say: [Beep] “ 01234567 89 ” (Say the voice input comm and for voice recognition learning (1 to 8) according to the voice guidan ce.
Black plate (310,1) When Bluetooth Hands- Free Cannot be Used Bluetooth Hands-Free cannot be used under the following conditions: l The device is outside of the communication area. l The device has a malfunct ion. l The device is not connec ted to the hands-free unit equipp ed on the vehicle.
Black plate (31 1,1) Mazda Bluetooth Hands- Free Customer Service For toll-free Blueto oth Hands-Free customer servi ce call 800-430-0153 or go to www.MazdaUSA .com/bluetooth for assistance. Interior Comfort Bluetooth Hands-Free 6-93 Mazda3_8AD2-EA-08K_Edition1 Page31 1 Thursday , October 9 2008 1:6 PM Form No.
Black plate (312,1) Sunvisors When you need a sunvisor, lower it for use in front or swing it to the side. Sun visor q V anity Mirrors T o use the vanity mirror , lower the sunvisor . If your vehicle is equipped with a vanity mirror light, it wi ll illuminate when you open the cover .
Black plate (313,1) q Overhead Lights Front Rear Switch Position Overhead Lights Light off l Light is on when any door is open l Light is on or off when the illuminated entry system is on Light on q Map Lights The map lights are switch ed on or off by pressing the switch es.
Black plate (314,1) Information Display Clock Audio display Audio display Ambient temperature display Climate control display Climate control display Hands-free display Without multi information displ.
Black plate (315,1) q Clock í The time is displayed when the ignition is switched to ACC or ON. Time setting 1. Turn the ignition switch to the ACC or ON position. 2. Adjust the time using the time setting buttons ( , ). The hours advance whi le the time setting button ( ) is press ed.
Black plate (316,1) Multi Information Display í Steering switch Without navigation system With navigation system Clock adjustment buttons Steering Switch Left switch Right switch Navi switch B A CK switch INFO switch Enter (up/do wn) switch 6-98 Interior Comfort í Some models.
Black plate (317,1) Switch Function Enter (up/down) switch Used to select a menu and change numbers. Select up or down and press enter . Right switch/Left switch Used to select digits when setting numbers. Navi switch (W ith navigation sys- tem) Press to switch the system to the navigation system screen.
Black plate (318,1) q Clock The time is displayed when the ignition is switched to ACC or ON. Time setting Refer to Clock on page 6-97. Time resetting Refer to Clock on page 6-97. With navigation system Time zone switching 1. Press the INFO switch until the SETTINGS screen is displayed.
Black plate (319,1) q T rip Computer The trip computer can display the following: l The average fuel econom y . l The average vehicle speed. l The current fuel econo my . l The approximat e distance you can travel on the available fuel. 1. Switch the ignition ON.
Black plate (320,1) The current fuel econo my will be calculated every 2 seconds. When you've slow ed to about 5 km/h (3 mph), - - -L/100 km (- - -mpg) will be displayed. Distance-to-em pty This mode displays the approximate distance you can travel on the remaining fuel based on the fuel economy .
Black plate (321,1) 3. Select the item you want to turn on (TIRE ROT A TI ON or SER VICE DUE) by pressing the Enter (up/down) switch up or down, and then press the Enter (up/down) switch. 4. Press the Enter (up/down) switch. 5. Select SET and press the Enter (up/ down) switch.
Black plate (322,1) Message display When the remaining days or the distance approaches 0, a message is displayed for 5 seconds each time the ignition is switched to ACC or ON. NOTE l If the Enter (up/down) switch is pressed while a message is displayed, it will no longer be displayed the next time the engine is started.
Black plate (323,1) Display period Item Start of message display End of message display TIRE ROT A TION When remaining distance is less than 500 km (300 mile) Distance exceeds 500 km (300 mile) from r.
Black plate (324,1) 5. Select SET and press the Enter (up/ down) switch. NOTE If the SERVICE DUE item has been set, both the days and distance can be selected. Because the tir e r otation item can only be set according to distance, the screen for setting distance is displayed when SET is selected.
Black plate (325,1) 3. Select the item you want to turn off (TIRE ROT A TI ON or SER VICE DUE) by pressing the Enter (up/down) switch up or down, and then press the Enter (up/down) switch. 4. Select OFF and press the Enter (up/ down) switch. q W arning Indicator The following warning indicators are displayed according to necessity .
Black plate (326,1) 4. Select the desired setting by pressing the Enter (up/down) switch up or down, and then press the Enter (up/ down) switch. NOTE The buzzer volume for both the ignition key r eminder and the lights-on r eminder is changed simultaneously .
Black plate (327,1) q Rear The rear cup holder is on the rear center armrest. Bottle Holder Bottle holders are on the inside of the doors. Bottle holder CAUTION Do not use the bottle holders for containers without caps. The contents may spill wh en the door is opened or closed.
Black plate (328,1) Storage Compartments WARNING Keep storage boxes closed when driving: Driving with the storage boxes open is dangerous. To reduce the possibility of injury in an accident or a sudden stop, keep the storage boxes closed when dr iving.
Black plate (329,1) Storage tray í The storage tray can be installed to the left/right side of the center console. Storage tray Using the armrest í CAUTION When sliding the armrest, be careful not to hit a dr ink cup placed in a cup holder and spill its contents.
Black plate (330,1) q Shopping Bag Hook The shopping bag hook can be used for hanging shopping bags. CAUTION Do not hang excessive weight on the shopping bag hook as it could be damaged.
Black plate (331,1) Accessory Sockets Only use genuine Mazda accessories or the equivalent requi ring no greater than 120 W (DC 12 V , 10 A). Front The ignition switch must be in the ACC or ON position.
Black plate (332,1) CAUTION To prevent accessory socket damage or electrical failure, pay attention to the following: Ø Do not use accessories that requ ire more than 120 W (DC 12 V, 10 A). Ø Do not use accessories that are not genuine Mazda acces sories or the equivalent.
Black plate (333,1) 7 In Case of an Emergency Helpful information on what to do in an emergency . Parking in an Emergency ................................................... ....... ... 7-2 Parking in an Em ergency ....................................
Black plate (334,1) Parking in an Emergency The hazard warning ligh ts should always be used when you stop on or near a roadway in an emergency . The hazard warning ligh ts warn other drivers that your vehicle is a traffic hazard and that they must take extreme caution when near it.
Black plate (335,1) Spare T ire and T ool Storage Spare tire and tools are stor ed in the locations illustrated in the diagram. Spare tire Jack Jack handle T iedo wn e yelet Lug wrench 4 Door Bolt for flat tire In Case of an Emergency Flat Tir e 7-3 Mazda3_8AD2-EA-08K_Edition1 Page335 Thursday , October 9 2008 1:7 PM Form No.
Black plate (336,1) Spare tire Jack Jack handle Lug wrench T iedo wn e yelet Spare tire Jack Jack handle Lug wrench T iedo wn e yelet 5 Door (T ype A) (T ype B) Bolt for flat tire Bolt for flat tire 7-4 In Case of an Emergenc y Flat Tir e Mazda3_8AD2-EA-08K_Edition1 Page336 Thursday , October 9 2008 1:7 PM Form No.
Black plate (337,1) q Jack T o remove the jack (4 Door) 1. Remove the cover . 2. Turn the wing bolt and jack screw counterclockwise. W ing bolt Jack scre w (5 Door) 1. Turn the knob and remove the cover . 2. Turn the wing bolt and jack screw counterclockwise.
Black plate (338,1) T o secure the jack 1. Inser t the wing bolt into the jack with the jack screw pointing up and turn the wing bolt clockwi se to tem porarily tighten it. 2. Turn the jack screw in the direction shown in the figure. W ing bolt Jack scre w 3.
Black plate (339,1) NOTE (W ith T ire Pressure Monitoring System) A tir e pr essur e sensor is not installed to the temporary spar e tir e. The warning light will flash continuously while the temporary spar e tir e is being used (page 5-30). T o remove the spare tire (4 Door) 1.
Black plate (340,1) For vehicles not equipped with a sub- woofer , loosen the hold-down bolt and remove the spare tire. T o secure the spare tire Perform the remo val procedure in revers e. Secure the spare tire using the hold-down bolt and tire clamp in the correct position as illustrated.
Black plate (341,1) Changing a Flat Tire NOTE If the following occurs while driving, it could indicate a flat tire. l Steering becomes difficult. l The vehicle begins to vibrate excessively .
Black plate (342,1) q Removing a Flat Tire 1. If your vehicle is equipped with a wheel cover, pry off the wheel cover with the beveled end of the lug wrench. NOTE For ce the end of the lug wrench firmly between wheel and cover , or r emoval will be difficult.
Black plate (343,1) WARNING Use only the front and rear jacking positions recommen ded in this manual: Attempting to jack the vehicle in positions other than those recommended in this manual is dangerous. The vehicle could slip off the jack and seriously injure or even kill someone.
Black plate (344,1) q Locking Lug Nuts í If your vehicle has optional antitheft wheel lug nuts, one on each wheel will lock the tir es and y ou must use a special key to unlock them. This key is attached to the lug wrenc h and is stored with the spare tire.
Black plate (345,1) 3. Install the lug nuts with the beveled edge inward; tighten them by hand . WARNING Do not apply oil or grease to lug nuts and bolts and do not tighten the lug nuts beyond the recom mended tightening torque: Applying oil or grease to lug nuts and bolts is dangerou s.
Black plate (346,1) (With sub-woofer) Sub-woofer Bolt for flat tire 6. Remove the tire blocks and store the tools, jack, and damaged tire. 7. Check the inflation pressure. Ref er to the specificat ion charts on page 10-8. 8. Have the flat tire repaired or repla ced as soon as possible.
Black plate (347,1) Overheating If the High engine coolan t temperat ure warning light illumi nates, the vehicle loses power , or you hear a loud knocki ng or pinging noise, the engine is probably too hot.
Black plate (348,1) If you find a leak or other damage, or if coolant is still leaki ng: Stop the engine and call an Authori zed Mazda Dealer . If you find no problems, the engine is cool, and no leaks are obvious: Carefully add coolant as required (page 8-20).
Black plate (349,1) Starting a Flooded Engine If the engine fails to start, it may be flooded (excessive fuel in the engine). Follow this procedu re: (Without Advanced Keyless Ent ry & Push Button Start System) 1.
Black plate (350,1) Jump-Starting Jump-starting is dangerous if done incorrectly . So foll ow the procedure carefully . If you feel unsure about jum p-starting, we strongly recommend that you have a competent service technician do the work.
Black plate (351,1) Keep all flames, including cigarettes, and sparks away from ope n batter y cells : Flames and spar ks near open batte ry cells are danger ous. Hydrogen gas, produced during normal batte ry operation, could ignite and cause the batte ry to explode.
Black plate (352,1) 1. Remove the battery cover from its front side. Battery cov er 2. Make sure the booster battery is 12 V and that its negative terminal is grounded. 3. If the boost er battery is in another vehicle, don't allo w both vehicles to touch.
Black plate (353,1) Push-Starting Do not push-start your Mazda. WARNING Never tow a vehicle to star t it: Towing a vehicle to start it is dangerous. The vehicle being towed could surge forward when its engine starts, causing the two vehicles to collide.
Black plate (354,1) T owing Description W e recommend that towing be done only by an Authorized Mazda Dealer or a commercial tow-truck servi ce. Proper lifting and towing are necessary to prevent damage to the vehicle. Government and local laws must be followed.
Black plate (355,1) CAUTION Do not use the hooks under the rear bumper for towing and tying down, as they cannot hold the load and it will damage the bumper. Hooks Tiedown Hook CAUTION Don't use the tiedown hook under the rear for towing. It is designed ONLY for tying down the vehicle when it's being transported.
Black plate (356,1) T ype B CAUTION The cap cannot be complet ely removed. Do no t use exces sive force as it may damage the cap or scratch the painted bump er sur face. 3. Securel y install the tiedown eyelet using the lug wrench. Lug wrench 4. Hook the tying rope to the tiedown eyelet.
Black plate (357,1) Recreational T owing An example of “ recreational towing ” is towing your vehicle behind a motorhome. The transaxle is not designed for towing this vehicle on all 4 whee ls.
Black plate (358,1) 7-26 Mazda3_8AD2-EA-08K_Edition1 Page358 Thursday , October 9 2008 1:7 PM Form No.8AD2-EA-08K.
Black plate (359,1) 8 Maintenance and Care How to keep your Mazda in top condition. Introduction .................................................. ................................ 8-2 Introduction .............................. ......................
Black plate (360,1) Introduction Be extremely careful and prevent injury to yourself and others or damag e to your vehicl e when using this manua l for inspectio n and maintenance.
Black plate (361,1) Scheduled Maintenance (USA, Canada, and Puerto Rico) Follow Schedule 1 if the vehicle is operated mainly where none of the following conditions apply .
Black plate (362,1) q Schedule 1 Maintenance Interval Number of months or kilometers (miles), whichever comes first Months 6 12 18 24 30 36 42 48 ×1000 km 12 24 36 48 60 72 84 96 ×1000 miles 7.
Black plate (363,1) Maintenance Interval Number of months or kilometers (miles), whichever comes first Months 6 12 18 24 30 36 42 48 ×1000 km 12 24 36 48 60 72 84 96 ×1000 miles 7.
Black plate (364,1) q Schedule 2 Maintenance Interval Number of months or kilometers (miles), whichever comes first Months 4 8 12 16 20 24 28 32 36 40 44 48 ×1000 km 8 16 24 32 40 48 56 64 72 80 88 9.
Black plate (365,1) Maintenance Interval Number of months or kilometers (miles), whichever comes first Months 4 8 12 16 20 24 28 32 36 40 44 48 ×1000 km 8 16 24 32 40 48 56 64 72 80 88 96 ×1000 mile.
Black plate (366,1) Scheduled Maintenance (Mexico) Follow Schedule 1 if the vehicle is operated mainly where none of the following conditions apply . l Repeated short-distance driving l Driving in dus.
Black plate (367,1) q Schedule 1 Maintenance Interval Number of months or kilometers, whichever comes first Months 6 12 18 24 30 36 42 48 54 60 66 72 ×1000 km 10 20 30 40 50 60 70 80 90 100 1 10 120 .
Black plate (368,1) Maintenance Interval Number of months or kilometers, whichever comes first Months 6 12 18 24 30 36 42 48 54 60 66 72 ×1000 km 10 20 30 40 50 60 70 80 90 100 1 10 120 AIR CONDITIONER SYSTEM Cabin air filter R R R Chart symbols: I: Inspect: Inspect and clean, repair , adjust, fill up, or replace if necessary .
Black plate (369,1) q Schedule 2 Maintenance Interval Number of months or kilometers, whichever comes first Months 3 6 9 12 15 18 21 24 27 30 33 36 ×1000 km 5 10 15 20 25 30 35 40 45 50 55 60 ENGINE .
Black plate (370,1) Maintenance Interval Number of months or kilometers, whichever comes first Months 3 6 9 12 15 18 21 24 27 30 33 36 ×1000 km 5 10 15 20 25 30 35 40 45 50 55 60 AIR CONDITIONER SYSTEM Cabin air filter R R R Chart symbols: I: Inspect: Inspect and clean, repair, adjust, fill up, or replace if necessary .
Black plate (371,1) (Cont.) Maintenance Interval Number of months or kilometers, whichever comes first Months 39 42 45 48 51 54 57 60 63 66 69 72 ×1000 km 65 70 75 80 85 90 95 100 105 1 10 1 15 120 E.
Black plate (372,1) Maintenance Interval Number of months or kilometers, whichever comes first Months 39 42 45 48 51 54 57 60 63 66 69 72 ×1000 km 65 70 75 80 85 90 95 100 105 1 10 1 15 120 AIR CONDITIONER SYSTEM Cabin air filter R R R Chart symbols: I: Inspect: Inspect and clean, repair, adjust, fill up, or replace if necessary .
Black plate (373,1) Owner Maintenance Schedule The owner or a qualified service technician should make these vehicl e inspections at the indicated intervals to ensure safe and dependable operation. Bring any problem to the attention of an Aut horized Mazda Dealer or quali fied service technician as soon as possible.
Black plate (374,1) Owner Maintenance Precautions Improper or incom plete servi ce may resul t in problems. This section gives instruct ions only for items that are easy to perform. As explained in the Introduction (page 8-2), several procedures can be done only by a qualified servic e technician with special tools.
Black plate (375,1) Engine Compartment Overview Po wer steering fluid reservoir W indshield w asher fluid reservoir Engine coolant reservoir Fuse block Engine oil-filler cap Engine oil dipstick Brake/.
Black plate (376,1) Engine Oil NOTE Changing the engine oil should be done by an Authorized Mazda Dealer . q Recommended Oil Use SAE 5W -20 engine oil. Oil container labels provide important information. A chief contribution this type of oil makes to fuel economy is reducing the amount of fuel necessary to overcom e engine friction.
Black plate (377,1) The quality d esignation SM, or ILSAC must be on the label. 5W-20 120 100 80 60 40 20 0 –20 50 40 30 20 10 0 –10 –20 –30 q Inspecting Engine Oil Level 1. Be sure the vehicle is on a level surface. 2. W arm up the engine to norm al operating temperature.
Black plate (378,1) Engine Coolant q Inspecting Coolant Level WARNING Do not use a match or live flame in the engine compar tment . DO NOT ADD COOLANT WHEN T HE ENGINE IS HOT: A hot engine is dangerous. If th e engine has been run ning, parts of the engine compartment can become very hot.
Black plate (379,1) CAUTION Ø Radiator coolant will damage paint. Rinse it off quickly if spilled. Ø Use only soft (demineralized ) water in the coolant mixture. Water that contains minerals will cut down on the coolant's effectiveness. Ø Don't add only water.
Black plate (380,1) Brake/Clutch Fluid q Inspecting Brake/Clutc h Fluid Level The brakes and clutch draw fluid from the same reservoir . Inspect the fluid level in the reservoir regularly . It should be kept at MAX. The level normally drops with accumulated dist ance, a condition associated with wear of brake and clut ch linings.
Black plate (381,1) Power Steering Fluid q Inspecting Power Steering Fluid Level CAUTION To avoid damage to the power steering pump, don't operate the vehicle for lon g periods when the power steering fluid level is low. NOTE Use specified power steering fluid (page 10-4).
Black plate (382,1) 4. While the engine is still idling, pull out the dipstick and wipe it clean, and then put it back. 5. Check the A TF level. If there is no A TF adhering 5 mm from the end of the dipstick, add A TF . CAUTION If there is no ATF adhering to the dipstick even after the engine has been warmed up, do not drive the vehicle.
Black plate (383,1) W asher Fluid q Inspecting W asher Fluid Level WARNING Use only windshield washer fluid or plain water in the reservo ir: Using radiator antif reeze as washer fluid is dangerous. If sprayed on the windshield, it will dirty the windshield, affect your visibility, and could result in an accident.
Black plate (384,1) Body Lubrication All moving point s of the body , such as door and hood hinges and locks, should be lubricated each time the engine oil is changed. Use a nonfreezing lubricant on locks during cold weather . Make sure the hood's secondary latch keeps the hood from openin g when the primary latch is released.
Black plate (385,1) q Replacing Windshield Wiper Blades When the wipers no longer clean well, the blades are probably wor n or cracked. Replace them. CAUTION To prevent damage to the wiper arms and other compon ents, don't try to sweep the wiper arm by hand.
Black plate (386,1) CAUTION Ø Don't bend or discard the stif fener. You need to use th em again. Ø If the metal stiffeners are switched, the blade 's wiping efficiency could be reduced. So don't use the driver 's side metal stiffener on the passe nger's side, or vice versa.
Black plate (387,1) 3. Pull down the blade rubber and slide it out of the blade holder . 4. Remove the metal stiffeners from each blade rubber and install them in the new blade. CAUTION Don't bend or discard the stif feners. You need to use th em again.
Black plate (388,1) Battery WARNING Wash hands after handling the batter y and related accessories: Battery posts, terminals and relate d accessories contain lead and lead compou nds, chemicals known to the State of Califor nia to cause cancer and reproduct ive harm.
Black plate (389,1) Keep all flames, including cigarettes, and sparks away from ope n batter y cells : Flames and spar ks near open batte ry cells are danger ous. Hydrogen gas, produced during normal batte ry operation, could ignite and cause the batte ry to explode.
Black plate (390,1) NOTE Remove the battery cover befor e performing battery maintenance. Battery cov er q Battery Maintenance T o get the best service from a batte ry: l Keep it secure ly mounted. l Keep the top clean and dry . l Keep terminals and connect ions clean, tight, and coated with petroleum jelly or terminal grease.
Black plate (391,1) Tire s For reasons of p roper performance , safety , and better fuel econom y , always maintain recommended tir e inflation pressures and stay within the recommend ed load limits and weight distribution. WARNING Using Differen t Tire T ypes: Driving your vehicle with differe nt types of tire s is danger ous.
Black plate (392,1) NOTE l Always check tir e pr essur e when tires ar e cold. l W arm tires normally exceed r ecommended pr essur es. Don't r elease air fr om warm tir es to adjust the pr essur e.
Black plate (393,1) NOTE (W ith T ire Pressure Monitoring System) l When tir es with steel wire r einfor cement in the sidewalls ar e used, the system may not function corr ectly even with a genuine wheel. Refer to System Err or Activation on page 5-32.
Black plate (394,1) NOTE T ires degrade over time, even when they are not being used on the r oad. It is r ecommended that tir es generally be replaced when they ar e 6 years or older . Heat caused by hot climates or fr equent high loading conditions can accelerate the aging process.
Black plate (395,1) Light Bulbs Overhead light/Map lights (Front) Overhead light (Rear) Overhead light (Rear) Front turn signal lights/Front side- marker lights/ P arking lights Xenon fusion bulb/Adap.
Black plate (396,1) WARNING Do not replace the xenon fusion bulbs yourself: Replacing the xeno n fusion bulbs yourself is dangerous. Because the xenon fusion bulbs require high voltage, you could rec eive an electric shock if the bulbs are handled incorrectly.
Black plate (397,1) 3. Turn the socket and bulb assembly to remove it. Carefully remo ve the bulb from its socket in the reflector by gently pulling it straight backward out of the socket. 4. Install the new bulb in the revers e order of the removal procedure.
Black plate (398,1) 2. Disconne ct the electrica l connector from the bulb by pressing the tab on the connector wi th your finge r and pulling the connector downwar d. 3. Turn the socket and bulb assembly to remove it. Carefully remo ve the bulb from its socket in the reflector by gently pulling it straight backward out of the socket.
Black plate (399,1) 3. Turn the center section of the plastic retainer countercloc kwise and remove the retainers and partially peel back the mudguard. Installation Remov al 4. Turn the socket and bulb assembly counterclockwise and remove it. 5. Disconne ct the bulb from the socket.
Black plate (400,1) Side-turn signal lights With LED bulb Due to the complexit y and difficulty o f the procedure, the LED bulbs should be replaced by an Authorized Mazda Dealer . NOTE LED bulb r eplacement is not possible. The r ear combination component must be r eplaced.
Black plate (401,1) 2. Remove the cover . Left side Right side 3. Turn the socket and bulb assembly counterclockwise and remove it. 4. Disconne ct the bulb from the socket. 5. Install the new bulb in the revers e order of removal. Rear turn signal lights (4 Door) 1.
Black plate (402,1) 2. Remove the cover . Left side Right side 3. Turn the socket and bulb assembly counterclockwise and remove it. 4. Disconne ct the bulb from the socket. 5. Install the new bulb in the revers e order of removal. Reverse lights (4 Door) 1.
Black plate (403,1) 2. Remove the cover . 3. Turn the socket and bulb assembly counterclockwise and remove it. 4. Disconne ct the bulb from the socket. 5. Install the new bulb in the revers e order of removal. High-mount brake light (4 Door) 1. Make sure the ignition is switched off, and the headlight switch is off.
Black plate (404,1) 5. Disconne ct the bulb from the socket. 6. Install the new bulb in the revers e order of removal. License plate lights 1. Make sure the ignition is switched off, and the headlight switch is off.
Black plate (405,1) V anity mirror light s 3. Install the new bulb in the revers e order of removal. T runk light (4 Door) 1. Press both sides of the lens cap to remove it. 2. Disconne ct the bulb by pull ing it out. 3. Install the new bulb in the revers e order of removal.
Black plate (406,1) Fuses Y our vehicle' s electrical system is protected by fuses. If any lights, accessories , or controls don't work, inspect the appropr iate circuit protector .
Black plate (407,1) Replacing the fuses under the hood If the headlights or other electrical components do no t work and the fuses in the cabin are normal, inspect the fuse block under the hood. If a fuse is blown, it must be replaced. Follow these steps: 1.
Black plate (408,1) q Fuse Panel Description Fuse block (Engine compartment) 32 33 34 35 36 37 38 39 5 4 1 2 3 678 13 12 14 15 16 22 11 10 9 21 20 19 23 24 25 29 30 31 27 28 26 17 18 DESCRIPTION FUSE RA TING PROTECTED COMPONENT 1 F AN 2 ―― 2 ENG MAIN 40 A Engine control system 3 BTN 1 50 A For protection of various circuits 4 A/C MAG 7.
Black plate (409,1) DESCRIPTION FUSE RA TING PROTECTED COMPONENT 18 INJ ―― 19 R.DEF 30 A Rear window defroster 20 IGKEY 2 40 A For protection of various circuits 21 IGKEY 1 40 A For protection of .
Black plate (410,1) Fuse block (Passenge r's side) 1 4 7 1 01 31 61 9 5 8 11 14 17 20 6 9 12 15 18 21 28 30 22 24 26 29 31 23 25 27 32 33 34 2 3 DESCRIPTION FUSE RA TING PROTECTED COMPONENT 1 BOSE 30 A Bose ® Sound System-equipped model í 2 P SEA T 30 A Power seat í 3 P.
Black plate (41 1,1) DESCRIPTION FUSE RA TING PROTECTED COMPONENT 20 AUDIO 7.5 A Audio system 21 M.DEF 7.5 A Mirror defroster í 22 AFS 7.5 A Adaptive Front-Lighting System í 23 ―― ― 24 ENG 20 A Engine control system 25 ―― ― 26 ―― ― 27 ―― ― 28 ―― ― 29 ―― ― 30 P.
Black plate (412,1) How to Min imize Environmental Paint Damage The paintwork on your Mazda represents the latest technical developments in composition and methods of applicati on. Environmental hazards , however, can harm the paint's protective properties, if proper care is not taken.
Black plate (413,1) q W ater Marks Occurrence Rain, fog, dew , and even tap water can contain harmful minerals such as salt and lime. If moisture containing these minerals settles on the vehicle and evaporates, the min erals will concent rate and harden to form white rings.
Black plate (414,1) Exterior Care Follow all label and container directions when using a chemi cal cleaner or polish. Read all warnings and cautions. q Maintaining the Finish W ashing CAUTION When the.
Black plate (415,1) Pay special attention to removing salt, dirt, mud, and other foreign material from the underside of the fenders, and make sure the drain holes in the lower edges of the doors and rocker panels are clean.
Black plate (416,1) CAUTION Don't use steel wool, abrasive cleaners, or strong detergents containing highl y alkaline or caustic agents on chro me-plated or anodized aluminum parts. This may result in damage to the protective coatin g and cause discoloration or paint deterioration.
Black plate (417,1) Interior Care q Dashboard Precautions Prevent caustic solution s such as perfume and cosmetic oils from contacting the dashboard. They'll damag e and discolor it. If these solutions get on the dashboard, wipe them off immediately .
Black plate (418,1) q Cleaning the Lap/Shoulder Belt W ebbing Clean the webbing with a mild soap solution recom mended for upholstery or carpets. Follow instructions.
Black plate (419,1) 9 Customer Information Important consumer information including warranties and add-on equipment. Customer Assistance ............................... 9-2 Customer Assistance (U.S.A.) ............ 9-2 Customer Assistance (Canada) ...
Black plate (420,1) Customer Assistance (U.S.A.) Y our complete and perm anent satisfaction is our business. W e are here to serve you. All Authorized Mazda Dealers have the knowledge and the tools to keep your Mazda vehicle in top condition.
Black plate (421,1) By letter at: Attn: Customer Assistance Mazda North American Operati ons 7755 Irvine Cen ter Drive Irvine, CA 92618-2922 P.O. Box 19734 Irvine, CA 92623-9734 In order to serve you efficiently and effectively , please help us by providing the follow ing information: 1.
Black plate (422,1) The whole process norm ally takes 40 days or less. The arbitration decision is not binding on you or Mazda else you accept the decision. For more information about BBB AUTO LINE, including current eligibi lity standards, pleas e call 1-800-955-5100 or visit the BBB website at ww w.
Black plate (423,1) 6. Y ou are required to use BBB AUTO LINE before asserting in court any rights or remedies conferred by California Civil Code Section 1793.22. Y ou are also required to use BBB AUTO LINE before exerci sing rights or seeking remedies created by T itle I of the Magnuson-Moss W arrant y Act, 15 U.
Black plate (424,1) 10. Y ou may reject the decision issued by a BBB AUTO LINE arbitrator . If you rejec t the decision, you wi ll be free to pursue further legal action. The arbitrator's decision and any findings will be admissible in a court action.
Black plate (425,1) Customer Assistance (Canada) q Satisfaction Review Process Y our complete and permanent sati sfaction is of prima ry conce rn to Mazda. All Authorized Mazda Dealers have both the knowledge and tools to keep your Mazda in top condition.
Black plate (426,1) Please recogniz e that the resolution of service problems in most cases requires the use of your Mazda dealer's servi ce facilities, personnel and equipment. W e urge you to follow the above three steps in sequence for most effective results.
Black plate (427,1) CAMV AP is fully implem ented in all provinces and territories. Consumers wishin g to obtain further informat ion about the Program should contact the Provincial Adm inistrator at .
Black plate (428,1) Customer Assistance (Puerto Rico) Y our complete and permanent satisfaction is our business. That is why all Authorized Mazda Dealers have the knowledge and the tools to keep your Mazda vehicle in top condition.
Black plate (429,1) Customer Assistance (Mexico) Y our complete and perm anent satisfaction is our business. W e are here to serve you. All Authorized Mazda Dealers have the knowledge and the tools to keep your Mazda vehicle in top condition.
Black plate (430,1) In order to serve you efficiently and effectively , please help us by providing the follow ing information: 1. Y our name, address, and telephone number 2.
Black plate (431,1) Importer/Distributor q U.S.A. Mazda North American Operations 7755 Irvine Cen ter Drive Irvine, CA 92618-2922 U.S.A . P.O. Box 19734 Irvine, CA 92623-9734 U.S.A . TEL: 1 (800) 222-5500 (in U.S.A.) (949) 727-1990 (outside U.S.A.) Distributor in Each Area q CANADA Mazda Canada Inc.
Black plate (432,1) T riple J Saipan, Inc. (d.b.a. T riple J Motors ) P.O. Box 500487 Saipan, MP 96950-0 487 TEL: (670) 234-7133/3051 q AMERICAN SAMOA Polynesia Motors , Inc.
Black plate (433,1) W arranties for Y our Mazda l New V ehicle Limited W arranty l Distributor Majo r Component Limited W arranty (Canada only) l Safety Restraint System Limited W arranty l Anti-perfora tion Limited W arrant y l Federal Emission Control W arranty (U.
Black plate (434,1) Outside the United States Government regulations in the United State s require that automobiles meet specific emission regulations and safety standards. Therefore, vehicles built for use in the United States may differ from those sold in other countries.
Black plate (435,1) Outside Canada Government regul ations in Can ada require that automobiles meet speci fic emission regulations and safety regulations.
Black plate (436,1) Registering Y our V ehicle in A Foreign Country (Except United States and Canada) Government regul ations in your coun try could require that automobiles meet specific emission and safety stand ards. V ehicl es built for your country may differ from those built for other countr ies.
Black plate (437,1) Add-On Non-Genuine Parts and Accessories Non-genuine parts and accessories for Mazda vehicles can be found in stor es. These may fit your vehicle, but they are not app roved by Mazda for use with Mazda vehicles.
Black plate (438,1) Cell Phones W arning WARNING Please comply with the legal regulations concernin g the use of communication equipment in vehic les in your State or Provinc e: Use of any elec trical.
Black plate (439,1) Uniform Tir e Quality Grading System (UTQGS) This information relat es to the tire grading system developed by the U.S. National Highway T raffic Safety Administration for grading tires by tread wear , traction, and temperature perfor mance.
Black plate (440,1) WARNING Keep your vehicle' s tires properly inflated and not overloaded: Driving with improperly inflated or overloa ded tires is dangerous. Excessive speed, underinflation, or excessive loading, either separately or in combinat ion, can cause heat buildup and possible tire failure .
Black plate (441,1) Tir e Labeling Federal law requi res tire manufactur ers to place stand ardized information on the sidewall of all tires. This infor mation identifi es and describes the fundamental characteri stics of the tire and also provides a tire identification number for safety standard certificati on and in case of a recall.
Black plate (442,1) 1 1. Tread wear , traction and temperature grades 12. Max. permissible inflation press ure 13. SAFETY W ARNING P215/65R15 95 H is an ex ample of a tire size and load index rating. Here is an explanation of the various components of that tire size and load index rating.
Black plate (443,1) H “ H ” is the speed rating. The speed rating denotes the maximum speed for which the use of the tire is rated. Letter Rating Speed Rating Q 99 mph R 106 mph S 1 12 mph T 1 18 .
Black plate (444,1) T read W ear , T raction and T emperature Grades T read wear : The tread wear grade is a comparative rating based on the wear rate of the tire when tested under controlled conditions on a specified government test course.
Black plate (445,1) q Information on T emporary Tires Please refer to the diagram below . 1. T emporary tires 2. Nomina l width of tir e in millimeters 3. Ratio of height to width (aspect ratio) 4. Diagonal 5. Rim diameter code 6. Load index& speed symbol T1 15/70D 16 90M is an example of a tire size and load index rating.
Black plate (446,1) 70 “ 70 ” is the aspect ratio. This two-digit number indicates the tire's ratio of height to width. D “ D ” is the tire const ruction symbo l. D indicates “ diagonal ply construction ” . 16 “ 16 ” is the wheel rim diameter in inches .
Black plate (447,1) Location of the Tir e Label (Placard) Y ou will find the tire label containing tire inflation pressure by tire size and other important information on the drive r's side B- pillar or on the edge of the driver's door frame.
Black plate (448,1) WARNING Always check the tire inflation pressures on a regular basis according to the recommended tire inflation pressure on the tire label and in conjunction with the information in this owner's manual: Driving your vehicle with under-inflated tire s is dangerous.
Black plate (449,1) q Glossary of T erms Tire Placard: A label indicating the OE tire sizes, recommended inflati on pressure, and the maximum weight the vehicle can carry .
Black plate (450,1) Tir e Maintenance Improper or inadequate vehicle mai ntenance can cause tires to wear abnormall y . Here are some importan t maintenance points: q Tir e Inflation Pressure Inspect all tire press ure monthly (including the spare) when the tires are cold.
Black plate (451,1) CAUTION Rotate unidirectional tires and radia l tires that have an asymmetrical tread pattern or studs only from front to rear, not from side to side.
Black plate (452,1) q Safety Practices The way you drive has a great deal to do with your tire mileage and safet y . So cultivate good driving habits for your own benefit.
Black plate (453,1) V ehicle Loading WARNING Do not tow a traile r with this vehicle: Towing a trailer with this vehicle is dangerous becaus e it has not been designed to tow a trailer and doing so will affect the drive system which could result in vehicle damage.
Black plate (454,1) Base Curb W eight is the weight of the vehicle includi ng a full tank of fuel and all standard equipment . It does no t include pa ssengers, cargo, or optional eq uipment. V ehicle Curb W eight is the weigh t of your new vehicle when you picked it up from your dealer plus any after market equipment.
Black plate (455,1) SAMPLE CARGO Cargo W eight incl udes all weight added to the Base Curb W eight, incl uding cargo and optional equipm ent. The cargo weight limit decreas es depending on the number of vehicle occupants.
Black plate (456,1) Examples: Bas ed on a single occupant weight of 68 kg (150 lbs), and a value of 385 kg (849 lbs) for the “ combinati on weight of occupants and cargo should never exceed ” : Th.
Black plate (457,1) SAMPLE WARNING Exceeding Axle Weight Rating Li mits: Exceeding the Safety Certifi cation Label axle weight rating limits is dangerous and could result in death or serious injury as.
Black plate (458,1) GCW GCW (Gross Combination W eight) is the weight of the loaded vehicle (GVW). GCWR (Gross Com bination W e ight Rating) is the maximum allowable weight of the vehicle - including all cargo and passengers - that the vehicle can handle without risking damage.
Black plate (459,1) Steps for Determining the Correct Load Limit: Steps for Determining Correct Load Limit: (1) Locate the statement “ The combined weight of occupants and cargo should never exceed XXX kg or XXX lbs ” on your vehicle's placard.
Black plate (460,1) Reporting Safety Defects (U.S.A.) If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway T raff ic Safety Administration (NHTSA) in addition to notify ing Mazda Motor Corporation (Y our Mazda Importer/Distribut or).
Black plate (461,1) Reporting Safety Defects (Canada) Canadian customers who wish to report a safety-related defect to T ransport Canada, Defect Investigations and Recalls, may telephone the toll free.
Black plate (462,1) Service Publications Factory-authorized Mazda service publications are available for owne rs who wish to do some of thei r own mai ntenance an d repair . When requesting any of our publications through an Aut horized Mazda Dealer, refer to the chart below .
Black plate (463,1) q NA VIGA TION SYSTEM OWNER'S MANUAL: This booklet contains informat ion regarding the proper operat ion and use of the navigation system. This is not a technician's manual. Customer Information Service Publications 9-45 Mazda3_8AD2-EA-08K_Edition1 Page463 Thursday , October 9 2008 1:8 PM Form No.
Black plate (464,1) 9-46 Mazda3_8AD2-EA-08K_Edition1 Page464 Thursday , October 9 2008 1:8 PM Form No.8AD2-EA-08K.
Black plate (465,1) 10 Specifications T echnical information about your Mazda. Identification Numbers ............................................................... 10-2 V ehicl e Informat ion Labels ..................................................
Black plate (466,1) V ehicle Information Labels q V ehicle Identification Number The vehicle identifi cation number legally identifies your veh icle. The number is on a plate attached to the cowl panel locat ed on the left corner of the dashboard. This plate can easily be seen through the windshield.
Black plate (467,1) q Engine Number Forw ard Identification Numbers 10-3 Mazda3_8AD2-EA-08K_Edition1 Page467 Thursday , October 9 2008 1:8 PM Form No.8AD2-EA-08K.
Black plate (468,1) Specifications q Engine Item Specification 2.0-liter engine 2.5-liter engine T ype DOHC-16V in-line, 4-cylinder Bore × Stroke 87.5 × 83.1 mm (3.44 × 3.27 in) 89.0 × 100 mm (3.50 × 3.94 in) Displacement 1,999 ml (1,999 cc, 122.
Black plate (469,1) q Capacities (Approximate Quantities) Item Capacity Engine oil 2.0-liter engine W ith oil filter replacement 4.3 L (4.5 US qt, 3.8 Imp qt) W ithout oil filter replacement 3.9 L (4.1 US qt, 3.4 Imp qt) 2.5-liter engine W ith oil filter replacement 5.
Black plate (470,1) 5 Door Item V ehicle specification Overall length ST ANDARD TYPE (Canada) 4,500 mm (177.2 in) SPOR TY TYPE 4,505 mm (177.4 in) Overall width 1,755 mm (69.1 in) Overall height 1,470 mm (57.9 in) Front tread 16 inch 1,535 mm (60.4 in) 17 inch 1,530 mm (60.
Black plate (471,1) q Light Bulbs Exterior light Light bulb Category W attage ECE R (SAE) Headlights Halogen High beam 65 HB3 (#9005) Low beam 55 H1 1 (H1 1) Xenon fusion bulb High/Low beam 35 D2S (D2.
Black plate (472,1) q Tir es NOTE The tir es have been optimally matched with the chassis of your vehicle. When r eplacing tir es, Mazda r ecommends that you replace tir es of the same type originally fitted to your vehicle. For details, contact an Authorized Mazda Dealer .
Black plate (473,1) Personalization Features The following Personalization Features are available. These settings can only be changed by an Authorized Mazda Dealer .
Black plate (474,1) Setting A vailable customization Initial Setting After Setting Change Power door locks The vehicle-speed-response auto lock function can be deactivated. Activated Deactivated Locking/unlocking of the doors can be set in conjunction with the selector lever position.
Black plate (475,1) Setting A vailable customization Initial Setting After Setting Change Advanced keyless entry The function to automatically lock doors when leaving the vehicle while carrying the key can be activated. Deactivated Activated The advanced key's remaining battery level warning light in the instrument cluster can be deactivated.
Black plate (476,1) 10-12 Mazda3_8AD2-EA-08K_Edition1 Page476 Thursday , October 9 2008 1:8 PM Form No.8AD2-EA-08K.
Black plate (477,1) 11 Index 1 1-1 Mazda3_8AD2-EA-08K_Edition1 Page477 Thursday , October 9 2008 1:8 PM Form No.8AD2-EA-08K.
Black plate (478,1) A Accessory Sock et ............................ 6-113 Adaptable Front Lighting Sy stem (AFS) ..................... ........................... 5-59 Add-On Non-Genuine Parts and Accessories ............ ........................... 9-19 Advanced Key .
Black plate (479,1) C Capacities ............... ........................... 10-5 Carbon Monoxide ............................... 4-4 Cargo Securing Loo ps ..................... 6-1 1 1 Catalytic Converter .......................... ... 4-3 Cell Phones .
Black plate (480,1) F Flasher Hazard war ning .......................... 5-68 Headlights ....... ........................... 5-56 Flat T ire ............................................... 7-3 Changing ......................... ............. 7-9 Spare tire and tool storage .
Black plate (481,1) I Interior Lights ................................... 6-94 J Jump-Starting ........................ ............ 7-18 K Keyless Entry System ....................... 3-25 Keys ...................................... ............ 3-24 L Label Information .
Black plate (482,1) P Push-Starting ......................... ............ 7-21 R Rear Coat Hooks ............................. 6-1 12 Rear Door Child Safety Locks .......... 3-34 Rear Seat ................. ............................ 2-9 Rear W indow Defroster .
Black plate (483,1) T T ires Flat T ire ........................................ 7-3 Inflation pressu re ........................ 8-33 Replacement .... ........................... 8-34 Rotation ........... ........................... 8-34 Snow tires .
Black plate (484,1) 1 1-8 Mazda3_8AD2-EA-08K_Edition1 Page484 Thursday , October 9 2008 1:8 PM Form No.8AD2-EA-08K.
Ein wichtiger Punkt beim Kauf des Geräts Mazda 2010 Mazda3 4-Door (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Mazda 2010 Mazda3 4-Door noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Mazda 2010 Mazda3 4-Door - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Mazda 2010 Mazda3 4-Door reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Mazda 2010 Mazda3 4-Door erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Mazda 2010 Mazda3 4-Door besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Mazda 2010 Mazda3 4-Door verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Mazda 2010 Mazda3 4-Door. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Mazda 2010 Mazda3 4-Door gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
