Benutzeranleitung / Produktwartung 2007 B2300 Truck des Produzenten Mazda
Zur Seite of 279
JOBNAME: No Job Name PAGE: 1 SESS: 6 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og Introduction 4 Instrument Cluster 12 W arning lights and chimes 12 Gauges 17 Entertainment Systems 19.
JOBNAME: No Job Name PAGE: 2 SESS: 8 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og Seating and Safety Restraints 73 Seating 73 Safety restraints 75 Airbags 91 Child restraints 99 Tires.
JOBNAME: No Job Name PAGE: 3 SESS: 10 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og Engine coolant 242 Fuel information 248 Maintenance product specifications and capacities 266 Engine data 270 Accessories 274 Index 275 All rights reserved.
JOBNAME: No Job Name PAGE: 4 SESS: 12 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og CALIFORNIA Proposition 65 W arning W ARNING: Engine exhaust, some of its constituents, and certain vehicle components contain or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
JOBNAME: No Job Name PAGE: 5 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og SAFETY AND ENVIRONMENT PROTECTION W arning symbols in this guide How can you reduce the risk of personal injury to yourself or others? In this guide, answers to such questions are contained in comments highlighted by a bold W ARNING statement.
JOBNAME: No Job Name PAGE: 6 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og Event Data Recorder The computer in your vehicle is capable of recording detailed data potentially in.
JOBNAME: No Job Name PAGE: 7 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og Using your vehicle with a snowplow W ARNING: Do not use this vehicle for snowplowing. Y our vehicle is not equipped with a snowplowing package. Using your vehicle as an ambulance W ARNING: Do not use this vehicle as an ambulance.
JOBNAME: No Job Name PAGE: 8 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og These are some of the symbols you may see on your vehicle.
JOBNAME: No Job Name PAGE: 9 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og V ehicle Symbol Glossary Power W indow Lockout Personal Alarm System Feature Engine Oil Engine Coolan.
JOBNAME: No Job Name PAGE: 10 SESS: 4 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og Headlamp control (pg. 46) Instrument panel dimmer control (pg. 47) Instrument cluster (pg. 12) Speed control* (pg. 60) Hood release (pg. 229) Driver air bag (pg.
JOBNAME: No Job Name PAGE: 11 SESS: 4 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og 4wd control* (pg. 169) Audio system (pg. 19) Passenger airbag indicator (pg. 96) Auxiliary power point* (pg. 58) Climate control system (pg. 43) Cigar lighter* (pg.
JOBNAME: No Job Name PAGE: 12 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og W ARNING LIGHTS AND CHIMES W arning lights and gauges can alert you to a vehicle condition that may become serious enough to cause expensive repairs. A warning light may illuminate when a problem exists with one of your vehicle’ s functions.
JOBNAME: No Job Name PAGE: 13 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og W ARNING: Under engine misfire conditions, excessive exhaust temperatures could damage the catalytic converter , the fuel system, interior floor coverings or other vehicle components, possibly causing a fire.
JOBNAME: No Job Name PAGE: 14 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og Anti-lock brake system: If the ABS light stays illuminated or continues to flash, a malfunction has been detected; have the system serviced immediately by your authorized dealer .
JOBNAME: No Job Name PAGE: 15 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og Engine coolant temperature: Illuminates when the engine coolant temperature is high. Stop the vehicle as soon as possible , switch off the engine and let cool.
JOBNAME: No Job Name PAGE: 16 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og NOTE: If the light continues to flash have the system serviced. Anti-theft system: Flashes when the SecuriLock y Passive Anti-theft System has been activated.
JOBNAME: No Job Name PAGE: 17 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og GAUGES Speedometer: Indicates the current vehicle speed. Engine coolant temperature gauge: Indicates engine coolant temperature. At normal operating temperature, the needle will be in the normal range (between “H” and “C”).
JOBNAME: No Job Name PAGE: 18 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og T rip odometer: Registers the miles (kilometers) of individual journeys. Press the button once until “TRIP” appears in the display (this represents the trip mode).
JOBNAME: No Job Name PAGE: 19 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og AUDIO SYSTEMS AM/FM stereo (if equipped) Display preference: Y ou can select Clock mode, which displays the time, or Frequency mode, which displays the current radio frequency , to appear in the radio display .
JOBNAME: No Job Name PAGE: 20 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og 3. AUDIO: Press AUDIO repeatedly to toggle through the following modes and use / to make adjustments in those modes. Bass: Press AUDIO to decrease/increase the bass setting.
JOBNAME: No Job Name PAGE: 21 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og AM/FM stereo single CD system 1. CD eject: Press to eject the CD. 2. CLK (Clock): Press CLK until SELECT HOUR or SELECT MINUTE is displayed. Press MENU to adjust the hours/minutes.
JOBNAME: No Job Name PAGE: 22 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og Autoset: Press MENU to set the strongest local radio stations for AM/FM1/FM2 without losing your original manually set preset stations. When the six strongest stations are filled, the station stored in preset 1 will begin playing.
JOBNAME: No Job Name PAGE: 23 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og 12. SCAN: Press to toggle between SCAN ON and SCAN OFF . When activated, the system scans up through and plays a brief sampling of available radio stations or CD tracks.
JOBNAME: No Job Name PAGE: 24 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og AM/FM stereo single CD/MP3 Satellite Compatible system (if equipped) 1. CD eject: Press to eject the CD/MP3. 2. CLK (Clock): Press CLK until SELECT HOUR or SELECT MINS is displayed.
JOBNAME: No Job Name PAGE: 25 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og modes and use / to make an adjustment in those modes. CA TEGOR Y (Satellite Radio if equipped): Press MENU until the currently active category appears in the display (CA TEGORY ALL).
JOBNAME: No Job Name PAGE: 26 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og 5. TUNE : Press to manually go down/up ( / ) the radio frequency and also to select various settings in menu mode. In CA TEGORY ALL, press / to scroll through the list of available SIRIUS channel Categories (Pop, Rock, News, etc.
JOBNAME: No Job Name PAGE: 27 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og 11. SEEK/TRACK: Press to access the previous/next ( / ) strong station. In CD/MP3 mode, press to advance to the previous/next ( / ) track. In Satellite Radio mode (if equipped), press SEEK to seek to the previous/next channel.
JOBNAME: No Job Name PAGE: 28 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og 13. AM/FM: Press to select AM/FM1/FM2 frequency band.
JOBNAME: No Job Name PAGE: 29 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og Premium in-dash CD6/MP3 disc audio system 1. AM/FM: Press to select AM/FM1/FM2 frequency bands. 2. CD: Press to enter CD/MP3 mode. If a CD/MP3 is already in the system, the disc will start playing.
JOBNAME: No Job Name PAGE: 30 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og 5. MUTE: Press to mute the playing media. Press again to return to the playing media. 6. MENU: Press MENU repeatedly to toggle through the following modes and use / to make adjustment in those modes.
JOBNAME: No Job Name PAGE: 31 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og 9. SHUFF (Shuffle): Press to play the tracks on the current CD/MP3 in random order . In MP3 directory mode, press to play the tracks within the current directory in random order .
JOBNAME: No Job Name PAGE: 32 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og 18. LOAD: T o load a CD/MP3 disc to a specific slot, press LOAD and select the slot number by pressing the memory preset buttons. Press and hold LOAD to autoload up to six discs.
JOBNAME: No Job Name PAGE: 33 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og 1. AM/FM: Press to select AM/FM1/FM2 frequency bands. 2. CD: Press to enter CD/MP3 mode. If a CD/MP3 is already in the system, the disc will start playing.
JOBNAME: No Job Name PAGE: 34 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og CA TEGORY ALL, press / to scroll through the list of available Sirius Categories (Pop, Rock, News, etc.) Press SEEK or SCAN to select the channels within each category .
JOBNAME: No Job Name PAGE: 35 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og 9. SHUFF (Shuffle): Press to play the tracks on the current CD/MP3 in random order . In MP3 directory mode, press to play the tracks within the current directory in random order .
JOBNAME: No Job Name PAGE: 36 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og News, etc.), press SEEK to seek to the previous/next channel in the selected category . Press and hold SEEK to fast seek through the previous /next channels.
JOBNAME: No Job Name PAGE: 37 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og 19. CD slot: Insert a CD/MP3, label side up. CD units are designed to play commercially pressed 4.
JOBNAME: No Job Name PAGE: 38 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og 4. T urn the radio on, using either a tuned FM station or a CD loaded into the system. Adjust the volume to a comfortable listening level. 5. T urn the portable music player on and adjust the volume to 1/2 the volume.
JOBNAME: No Job Name PAGE: 39 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og AM: 530, 540–1700, 1710 kHz FM: 87.7, 87.9–107.
JOBNAME: No Job Name PAGE: 40 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og more information and a complete list of SIRIUS satellite radio channels, visit www .sirius.com in the United States, www .sirius-canada.ca in Canada, or call SIRIUS at 1–888–539–7474.
JOBNAME: No Job Name PAGE: 41 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og satellite radio account. Y ou will need this number when communicating with SIRIUS. While in Satellite Radio mode, you can view this number on the radio display by pressing AUX and Preset 1 control simultaneously .
JOBNAME: No Job Name PAGE: 42 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og Radio Display Condition Action Required NO TEXT Song title information not available. Song title information not available at this time on this channel.
JOBNAME: No Job Name PAGE: 43 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og HEATER ONLY SYSTEM (IF EQUIPPED) 1. Fan speed adjustment: Controls the volume of air circulated in the vehicle. 2. T emperature selection: Controls the temperature of the airflow in the vehicle.
JOBNAME: No Job Name PAGE: 44 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og W ARNING: Do not place objects on top of the instrument panel as these objects may become projectiles in a collision or sudden stop. MANUAL HEATING AND AIR CONDITIONING SYSTEM (IF EQUIPPED) 1.
JOBNAME: No Job Name PAGE: 45 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og • Under normal weather conditions, do not leave the air flow selector in MAX A/C or OFF when the vehicle is parked. This allows the vehicle to “breathe” using the outside air inlet vents.
JOBNAME: No Job Name PAGE: 46 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og HEADLAMP CONTROL T urns the lamps off. T urns on the parking lamps, instrument panel lamps, license plate lamps and tail lamps. T urns the headlamps on.
JOBNAME: No Job Name PAGE: 47 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og Flash to pass Pull toward you slightly to activate and release to deactivate. Daytime running lamps (DRL) (if equipped) T urns the headlamps on with a reduced output.
JOBNAME: No Job Name PAGE: 48 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og problems fixing the alignment of your headlamps, have them checked by a qualified service technician. Headlamp aim adjustment The headlamps are designed to be mechanically aimed, but can also be aimed visually by doing the following: 1.
JOBNAME: No Job Name PAGE: 49 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og 5. Locate the vertical adjuster for each headlamp. Adjust the aim by usin ga4m m wrench to turn the adjuster control either clockwise (to adjust down) or counterclockwise (to adjust up).
JOBNAME: No Job Name PAGE: 50 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og INTERIOR LAMPS Courtesy/reading lamps (if equipped) The courtesy lamp lights when: • any door is opened. • the instrument panel dimmer switch is held up until the courtesy lamps come on.
JOBNAME: No Job Name PAGE: 51 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og Function Number of bulbs T rade number Rear license plate lamps 2 194 Backup lamps 2 3155 Dome lamp 1 912 Map/dome-SuperCab (if equipped) 2 904 Map/dome-Regular Cab (if equipped) 1 904 All replacement bulbs are clear in color except where noted.
JOBNAME: No Job Name PAGE: 52 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og W ARNING: Children and Halogen Bulbs: Playing with a halogen bulb is dangerous. Serious injuries could be caused by dropping a halogen bulb or breaking in some other way .
JOBNAME: No Job Name PAGE: 53 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og tabs in the lamp assembly . When the grooves are aligned, push the bulb into the lamp assembly until the plastic base contacts the rear of the lamp assembly .
JOBNAME: No Job Name PAGE: 54 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og 5. Carefully pull bulb straight out of socket and push in the new bulb. 6. Install the bulb socket in lamp assembly by turning clockwise. 7. Align the lamp on the vehicle and push to snap in place.
JOBNAME: No Job Name PAGE: 55 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og Replacing fog lamp bulbs W ARNING: Handling Halogen Bulbs: When a halogen bulb breaks, it is dangerous. These bulbs contain pressurized gas. If one is broken, it will explode and serious injuries could be caused by the flying glass.
JOBNAME: No Job Name PAGE: 56 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og Replacing license plate lamp bulbs The license plate bulbs are located behind the rear bumper . T o change the license plate lamp bulbs: 1. Reach behind the rear bumper to locate the bulb socket.
JOBNAME: No Job Name PAGE: 57 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og MULTI-FUNCTION LEVER W indshield wiper: Rotate the end of the control away from you to increase the speed of the wipers (from desired interval to low or high speed position); rotate towards you to decrease the speed of the wipers.
JOBNAME: No Job Name PAGE: 58 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og TILT STEERING WHEEL (IF EQUIPPED) T o adjust the steering wheel: 1. Pull and hold the steering wheel release control toward you. 2. Move the steering wheel up or down until you find the desired location.
JOBNAME: No Job Name PAGE: 59 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og The auxiliary power points are located on the instrument panel.
JOBNAME: No Job Name PAGE: 60 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og One touch down Allows the driver’ s window to open fully without holding the control down. Press completely down on AUTO and release quickly . Press again to stop.
JOBNAME: No Job Name PAGE: 61 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og W ARNING: Do not shift the gearshift lever into N (Neutral) with the speed control on. Y ou may lose control of the vehicle or cause engine system damage.
JOBNAME: No Job Name PAGE: 62 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og Resuming a set speed Press the RES (resume) control and release it. This will automatically return the vehicle to the previously set speed. The RES control will not work if the vehicle speed is not faster than 30 mph (48 km/h).
JOBNAME: No Job Name PAGE: 63 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og • Depress the brake pedal or the clutch pedal (if equipped). This will not erase your vehicle’ s previously set speed. • Press the speed control OFF control.
JOBNAME: No Job Name PAGE: 64 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og T o extend the bed extender: 1. Lower tailgate. 2. Pull the lever on each side of the bed extender to release it from the pickup box. 3. Lift the bed extender over on to the tailgate.
JOBNAME: No Job Name PAGE: 65 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og T o remove the bed extender: 1. Extend the bed extender . 2. Pull the lever on each side of the bed extender to unlock it. Make sure the locking clip screws are loose before removing the bed extender .
JOBNAME: No Job Name PAGE: 66 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og KEYS The key operates all locks on your vehicle. Y ou should always carry a second key with you in a safe place in case you require it in an emergency .
JOBNAME: No Job Name PAGE: 67 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og • unlock the vehicle doors without a key . • lock all the vehicle doors without a key .
JOBNAME: No Job Name PAGE: 68 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og T o replace the battery: 1. T wist a thin coin between the two halves of the remote entry transmitter near the key ring. DO NOT T AKE THE RUBBER COVER AND CIRCUIT BOARD OFF THE FRONT HOUSING OF THE REMOTE ENTRY TRANSMITTER.
JOBNAME: No Job Name PAGE: 69 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og Note: Ensure the brake pedal is not depressed during this sequence. T o reprogram the remote entry transmitters: 1. Ensure the vehicle is electronically unlocked.
JOBNAME: No Job Name PAGE: 70 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og The battery saver will shut off the interior lamps after several minutes if they are left on accidentally . SECURILOCK Y PASSIVE ANTI-THEFT SYSTEM (IF EQUIPPED) SecuriLock y passive anti-theft system is an engine immobilization system.
JOBNAME: No Job Name PAGE: 71 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og • When the ignition is in the 1 (OFF/LOCK) position, the indicator will not flash. • When the igniton is in the 3 (ON) position, the indicator will glow for 3 seconds to indicate the engine is enabled.
JOBNAME: No Job Name PAGE: 72 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og 4. W ithin ten seconds of removing the previously programmed coded key , insert the other previously programmed coded key into the ignition. 5. T urn the ignition from the 3 (OFF) position to the 4 (ON) position.
JOBNAME: No Job Name PAGE: 73 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og SEA TING Adjusting the front manual seat (if equipped) W ARNING: Never adjust the driver’ s seat or seatback when the vehicle is moving. The seat could slide too far leaving you unable to operate vital controls just when you need them.
JOBNAME: No Job Name PAGE: 74 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og Pull lever located at the side of the seat cushion up to adjust seatback. 60/40 seat (if equipped) T o gain access to the storage compartment in your armrest (if equipped), lift the latch to open lid.
JOBNAME: No Job Name PAGE: 75 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og T o return seat to original position, slide the seat bottom back, then push the seatback up to lock it in place. The seat will lock, and you will have to use the release bar to move the seat back to the original position.
JOBNAME: No Job Name PAGE: 76 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og • Front passenger sensing system • Passenger Airbag Off indicator light. • Restraints Control Module (RCM) with impact and safing sensors. • Restraint system warning light and back-up tone.
JOBNAME: No Job Name PAGE: 77 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og position. The system is designed to help protect smaller drivers sitting close to the driver airbag by providing a lower airbag output level.
JOBNAME: No Job Name PAGE: 78 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og allows your Personal Safety System y to tailor the airbag deployment and safety belt pretensioner activation depending upon safety belt usage. Refer to Safety belt usage sensors later in this chapter .
JOBNAME: No Job Name PAGE: 79 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og Safety restraints precautions W ARNING: Always drive and ride with your seatback upright and the lap belt snug and low across the hips. W ARNING: T o reduce the risk of injury , make sure children sit where they can be properly restrained.
JOBNAME: No Job Name PAGE: 80 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og W ARNING: On Cab Plus 4 vehicles, do not open the rear door when the rear safety belt is still buckled.
JOBNAME: No Job Name PAGE: 81 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og Insert the tongue into the correct buckle (the buckle closest to the direction the tongue is coming from). T o lengthen the belt, turn the tongue at a right angle to the belt and pull across your lap until it reaches the buckle.
JOBNAME: No Job Name PAGE: 82 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og Automatic locking mode (outboard front passenger seating position only) for use with child safety seats In this mode, the shoulder belt is automatically pre-locked.
JOBNAME: No Job Name PAGE: 83 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og W ARNING: After any vehicle collision, the entire safety belt system should be checked for proper operation by an authorized dealer . V erify that the ( automatic locking retractors” in all outboard seating positions are functioning properly .
JOBNAME: No Job Name PAGE: 84 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og • Regular Cab and four–door Cab Plus 4 T o lower the shoulder belt height, push the button and slide the height adjuster down. T o raise the height of the shoulder belt, slide the height adjuster up.
JOBNAME: No Job Name PAGE: 85 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og position. All safety belt assemblies, including retractors, buckles, front safety belt buckle assemb.
JOBNAME: No Job Name PAGE: 86 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og If... Then... The driver’ s safety belt is buckled before the ignition switch is turned to the ON position... The safety belt warning light and indicator chime remain off.
JOBNAME: No Job Name PAGE: 87 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og If... Then... The driver’ s and front passenger’ s safety belts are buckled before the ignition switch is turned to the ON position or less than 1-2 minutes have elapsed since the ignition switch has been turned ON.
JOBNAME: No Job Name PAGE: 88 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og Reasons given... Consider ... 9 Crashes are rare events 9 36,700 crashes occur every day . The more we drive, the more we are exposed to 9 rare 9 events, even for good drivers.
JOBNAME: No Job Name PAGE: 89 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og Reasons given... Consider ... 9 I have an airbag 9 Airbags offer greater protection when used with safety belts. Frontal airbags are not designed to inflate in rear and side crashes or rollovers.
JOBNAME: No Job Name PAGE: 90 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og • The gearshift is in P (Park) (automatic transmission) • The ignition switch is in the OFF posi.
JOBNAME: No Job Name PAGE: 91 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og AIRBAG SUPPLEMENT AL RESTRAINT SYSTEM (SRS) The airbag supplemental restraint system is designed to work in conjunction with the safety belts to help protect the driver and front outboard passenger from certain upper body injuries.
JOBNAME: No Job Name PAGE: 92 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og W ARNING: Airbags DO NOT inflate slowly or gently and the risk of injury from a deploying airbag is greatest close to the trim covering the airbag module.
JOBNAME: No Job Name PAGE: 93 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og W ARNING: National Highway T raffic Safety Administration (NHTSA) recommends a minimum distance of at least 25 cm (10 inches) between an occupant’ s chest and the driver air bag module.
JOBNAME: No Job Name PAGE: 94 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og Children and airbags For additional important safety information, read all information on safety restraints in this guide. W ARNING: Do not install a child seat in a center facing jump seat.
JOBNAME: No Job Name PAGE: 95 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og The airbags inflate and deflate rapidly upon activation. After airbag deployment, it is normal to notice a smoke-like, powdery residue or smell the burnt propellant.
JOBNAME: No Job Name PAGE: 96 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og • The readiness lights will either flash or stay lit. • The readiness lights will not illuminate immediately after ignition is turned on. • A series of five beeps will be heard.
JOBNAME: No Job Name PAGE: 97 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og • a front passenger takes his/her weight off of the seat for a period of time, W ARNING: Even with Advanced Restraints Systems, children 12 and under should be properly restrained in the back seat (if equipped).
JOBNAME: No Job Name PAGE: 98 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og Occupant Pass Airbag Off Indicator Lamp Passenger Airbag Empty seat Unlit Disabled Small child in ch.
JOBNAME: No Job Name PAGE: 99 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og Relationship Center at the phone number shown in the Customer Assistance section of this Owner’ s Guide. The front passenger sensing system may detect small or medium objects placed on the seat cushion.
JOBNAME: No Job Name PAGE: 100 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og NOTE: Always follow the instructions and warnings that come with any infant or child restraint you might use. W ARNING: Do not install a child seat in a center facing jump seat.
JOBNAME: No Job Name PAGE: 101 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og Booster seats position a child so that safety belts fit better . They lift the child up so that the lap belt rests low across the hips and the knees bend comfortably .
JOBNAME: No Job Name PAGE: 102 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og • Those with a high back. If, with a backless booster seat, you cannot find a seating position that adequately supports your child’ s head, a high back booster seat would be a better choice.
JOBNAME: No Job Name PAGE: 103 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og W ARNING: Never put the shoulder belt under a child’ s arm or behind the back because it eliminates the protection for the upper part of the body and may increase the risk of injury or death in a collision.
JOBNAME: No Job Name PAGE: 104 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og • Place seat back in upright position. • Put the safety belt in the automatic locking mode. Refer to Automatic locking mode (passenger side front seat).
JOBNAME: No Job Name PAGE: 105 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og 2. Pull down on the shoulder belt and then grasp the shoulder belt and lap belt together .
JOBNAME: No Job Name PAGE: 106 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og 5. T o put the retractor in the automatic locking mode, grasp the shoulder portion of the belt and pull downward until all of the belt is extracted and a click is heard.
JOBNAME: No Job Name PAGE: 107 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og Check to make sure the child seat is properly secured before each use.
JOBNAME: No Job Name PAGE: 108 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og W ARNING: Never attach two child safety seat tethers to a single tether anchor . In a crash, on anchor may not be strong enough to hold two child safety seat attachments and may break, causing serious injury or death.
JOBNAME: No Job Name PAGE: 109 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og 4. Clip the tether strap to the anchor . W ARNING: If the tether strap is clipped incorrectly , the child safety seat may not be retained properly in the event of a collision.
JOBNAME: No Job Name PAGE: 110 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og W ARNING: If the tether strap is clipped incorrectly , the child safety seat may not be retained properly in the event of a collision.
JOBNAME: No Job Name PAGE: 111 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og NOTICE TO UTILITY VEHICLE AND TRUCK OWNERS Utility vehicles and trucks handle differently than passenger cars in the various driving conditions that are encountered on streets, highways and off-road.
JOBNAME: No Job Name PAGE: 112 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og Power is supplied to all four wheels through a transfer case or power transfer unit. 4WD vehicles allow you to select different drive modes as necessary .
JOBNAME: No Job Name PAGE: 113 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og • Narrower — to provide greater maneuverability in tight spaces, particularly in off-road use.
JOBNAME: No Job Name PAGE: 114 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og government test course. For example, a tire graded 150 would wear one and one-half (1 1/2) times as well on the government course as a tire graded 100.
JOBNAME: No Job Name PAGE: 115 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og • T ire Identification Number (TIN): A number on the sidewall of each tire providing information about the tire brand and manufacturing plant, tire size and date of manufacture.
JOBNAME: No Job Name PAGE: 116 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og At least once a month and before long trips, inspect each tire and check the tire pressure with a tire gauge (including spare, if equipped). Inflate all tires to the inflation pressure recommended by Mazda.
JOBNAME: No Job Name PAGE: 117 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og drop of 1 psi (7 kPa) in inflation pressure. Check your tire pressures frequently and adjust them to the proper pressure which can be found on the Safety Compliance Certification Label or T ire Label.
JOBNAME: No Job Name PAGE: 118 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og tread grooves. Check for holes or cuts that may permit air leakage from the tire and make necessary repairs. Also inspect the tire sidewalls for cracking, cuts, bruises and other signs of damage or excessive wear .
JOBNAME: No Job Name PAGE: 119 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og W ARNING: Age T ires degrade over time depending on many factors such as weather , storage conditions, and conditions of use (load, speed, inflation pressure, etc.
JOBNAME: No Job Name PAGE: 120 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og W ARNING: Only use replacement tires and wheels that are the same size, load index, speed rating and type (such as P-metric versus L T -metric or all-season versus all-terrain) as those originally provided by Mazda.
JOBNAME: No Job Name PAGE: 121 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og It is recommended that the two front tires or two rear tires generally be replaced as a pair . The tire pressure sensors mounted in the wheels (originally installed on your vehicle) are not designed to be used in aftermarket wheels.
JOBNAME: No Job Name PAGE: 122 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og Tire and wheel alignment A bad jolt from hitting a curb or pothole can cause the front end of your vehicle to become misaligned or cause damage to your tires.
JOBNAME: No Job Name PAGE: 123 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og • Front Wheel Drive (FWD) vehicles (front tires at top of diagram) art=f23mc121_a REVIEW COPY —.
JOBNAME: No Job Name PAGE: 124 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og • Rear Wheel Drive (RWD) vehicles/Four Wheel Drive (4WD)/All Wheel Drive (A WD) vehicles (front tires at top of diagram) Sometimes irregular tire wear can be corrected by rotating the tires.
JOBNAME: No Job Name PAGE: 125 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og Information on “P” type tires P215/65R15 95H is an example of a tire size, load index and speed rating. The definitions of these items are listed below .
JOBNAME: No Job Name PAGE: 126 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og Note: Y ou may not find this information on all tires because it is not required by federal law .
JOBNAME: No Job Name PAGE: 127 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og Compliance Certification Label, which is located on the B-Pillar or the edge of the driver’ s door , for the correct tire pressure for your vehicle.
JOBNAME: No Job Name PAGE: 128 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og Additional information contained on the tire sidewall for “L T” type tires “L T” type tires have some additional information beyond those of “P” type tires; these differences are described below: 1.
JOBNAME: No Job Name PAGE: 129 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og Information on “T” type tires “T” type tires have some additional information beyond those of “P” type tires; these differences are described below: T145/80D16 is an example of a tire size.
JOBNAME: No Job Name PAGE: 130 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og TIRE PRESSURE MONITORING SYSTEM (TPMS) Each tire, including the spare (if provided), should be chec.
JOBNAME: No Job Name PAGE: 131 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og Changing tires with TPMS Each road tire is equipped with a tire pressure sensor fastened to the inside rim of the wheel. The pressure sensor is covered by the tire and is not visible unless the tire is removed.
JOBNAME: No Job Name PAGE: 132 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og When you believe your system is not operating properly The main function of the T ire Pressure Monitoring System is to warn you when your tires need air .
JOBNAME: No Job Name PAGE: 133 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og Low T ire Pressure W arning Light Possible cause Customer Action Required Solid W arning Light T ire(s) under -inflated 1. Check your tire pressure to ensure tires are properly inflated; refer to Inflating your tires in this chapter .
JOBNAME: No Job Name PAGE: 134 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og Low T ire Pressure W arning Light Possible cause Customer Action Required Flashing W arning Light Spare tire in use Y our temporary spare tire is in use.
JOBNAME: No Job Name PAGE: 135 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og underinflated, carefully drive the vehicle to the nearest location where air can be added to the tires. Inflate all the tires to the recommended inflation pressure.
JOBNAME: No Job Name PAGE: 136 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og capability , with or without a trailer . Properly loading your vehicle will provide maximum return of vehicle design performance.
JOBNAME: No Job Name PAGE: 137 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og Payload – is the combined weight of cargo and passengers that the vehicle is carrying.
JOBNAME: No Job Name PAGE: 138 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og Example only: Cargo W eight – includes all weight added to the Base Curb W eight, including cargo and optional equipment. When towing, trailer tongue load or king pin weight is also part of cargo weight.
JOBNAME: No Job Name PAGE: 139 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og GA WR (Gross Axle W eight Rating) – is the maximum allowable weight that can be carried by a single axle (front or rear).
JOBNAME: No Job Name PAGE: 140 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og GCW (Gross Combined W eight) – is the weight of the loaded vehicle (GVW) plus the weight of the fully loaded trailer .
JOBNAME: No Job Name PAGE: 141 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og W ARNING: Exceeding any vehicle weight rating limitation could result in serious damage to the vehicle and/or personal injury . Steps for determining the correct load limit: 1.
JOBNAME: No Job Name PAGE: 142 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og you have been planning for the past 2 years. Measuring the inside of the vehicle with the rear seat folded down, you have room for 12-100 lb. (45 kg) bags of cement.
JOBNAME: No Job Name PAGE: 143 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og T owing a trailer places an additional load on your vehicle’ s engine, transmission, axle, brakes, tires and suspension. Inspect these components carefully after any towing operation.
JOBNAME: No Job Name PAGE: 144 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og 4x2 w/manual transmission Engine Rear axle ratio Maximum GCWR - lb.
JOBNAME: No Job Name PAGE: 145 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og 4x4 w/manual transmission Engine Rear axle ratio Maximum GCWR - lb. (kg) Maximum trailer weight - lb. (kg) Maximum frontal area of trailer - ft 2 (m 2 ) Maximum trailer weight is shown.
JOBNAME: No Job Name PAGE: 146 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og 4x2 w/automatic transmission Engine Rear axle ratio Maximum GCWR - lb. (kg) Maximum trailer weight - lb. (kg) Maximum frontal area of trailer - ft 2 (m 2 ) For high altitude operation, reduce GCW by 2% per 1,000 ft.
JOBNAME: No Job Name PAGE: 147 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og 4x4 w/automatic transmission Engine Rear axle ratio Maximum GCWR - lb.
JOBNAME: No Job Name PAGE: 148 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og Do not install a single or multi-clamp type bumper hitch, or a hitch which attaches to the axle. Underbody mounted hitches are acceptable if they are installed properly .
JOBNAME: No Job Name PAGE: 149 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og The rated capacities (as shown in this guide) for trailer towing with the factory bumper are only valid when the trailer hitch ball is installed directly into the ball hole in the bumper .
JOBNAME: No Job Name PAGE: 150 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og Driving while you tow When towing a trailer: • Keep your speed no faster than 70 mph (112 km/h) during the first 500 miles (800 km) of towing a trailer , and don’t make full throttle starts.
JOBNAME: No Job Name PAGE: 151 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og lube used, do not tow a trailer for the first 500 miles (800 km) of a new vehicle, and that the first 500 miles (800 km) of towing be done at no faster than 70 mph (112 km/h) with no full throttle starts.
JOBNAME: No Job Name PAGE: 152 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og • Move the gearshift to the neutral position. • T urn the key in the ignition to the OFF/UNLOCKED position. • The maximum recommended speed is 55 mph (88 km/h).
JOBNAME: No Job Name PAGE: 153 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og CAMPER BODIES Y our pickup is not recommended for slide–in camper bodies.
JOBNAME: No Job Name PAGE: 154 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og STARTING Positions of the ignition 1. ACCESSORY , allows the electrical accessories such as the radio to operate while the engine is not running. 2. LOCK, locks the steering wheel, automatic transmission gearshift lever and allows key removal.
JOBNAME: No Job Name PAGE: 155 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og W ARNING: Extended idling at high engine speeds can produce very high temperatures in the engine and exhaust system, creating the risk of fire or other damage.
JOBNAME: No Job Name PAGE: 156 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og • Make sure the parking brake is set. • Make sure the gearshift is in P (Park). If starting a vehicle with a manual transmission: 1. Make sure the parking brake is set.
JOBNAME: No Job Name PAGE: 157 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og Some warning lights will briefly illuminate. See W arning lights and chimes in the Instrument Cluster chapter for more information regarding the warning lights.
JOBNAME: No Job Name PAGE: 158 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og strongly recommended if you live in a region where temperatures reach -10°F (-23°C) or below . For best results, plug the heater in at least three hours before starting the vehicle.
JOBNAME: No Job Name PAGE: 159 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og The ABS operates by detecting the onset of wheel lockup during brake applications and compensates for this tendency . The wheels are prevented from locking even when the brakes are firmly applied.
JOBNAME: No Job Name PAGE: 160 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og Parking brake Apply the parking brake whenever the vehicle is parked. T o set the parking brake, press the parking brake pedal down until the pedal stops.
JOBNAME: No Job Name PAGE: 161 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og STEERING Y our vehicle is equipped with power steering. Power steering uses energy from the engine to decrease the driver’ s effort in steering the vehicle.
JOBNAME: No Job Name PAGE: 162 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og W ARNING: In a rollover crash, an unbelted person is significantly more likely to die than a person wearing a seat belt.
JOBNAME: No Job Name PAGE: 163 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og 1. Apply the parking brake, turn ignition key to LOCK, then remove the key . 2. Insert the key and turn it to OFF . Apply the brake pedal and shift to N (Neutral) .
JOBNAME: No Job Name PAGE: 164 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og This vehicle is equipped with an adaptive T ransmission Shift Strategy . Adaptive Shift Strategy offers the optimal transmission operation and shift quality .
JOBNAME: No Job Name PAGE: 165 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og N (Neutral) W ith the gearshift lever in N (Neutral), the vehicle can be started and is free to roll. Hold the brake pedal down while in this position.
JOBNAME: No Job Name PAGE: 166 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og • Depress the accelerator to the floor . • Allows transmission to select an appropriate gear .
JOBNAME: No Job Name PAGE: 167 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og Upshifts Shift from: T ransfer case position (if equipped) 2WD and 4H 4L 1 -2 10 mph (16 km/h) 4 mp.
JOBNAME: No Job Name PAGE: 168 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og Removing the key T urn the ignition off, push the release lever (located above the ignition), then turn the key toward you and remove the key .
JOBNAME: No Job Name PAGE: 169 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og • 4x4 LOW – Momentarily illuminates when the vehicle is started. Illuminates when 4L (4WD Low) is engaged. Using the electronic shift 4WD system 2H (2WD High) - Power to the rear wheels only; used for street and highway driving.
JOBNAME: No Job Name PAGE: 170 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og • If shifting into 4L (4WD Low), wait for the 4WD LOW light in the instrument cluster to turn on indicating the shift is complete.
JOBNAME: No Job Name PAGE: 171 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og pavement only after reducing your speed. Do not turn the steering wheel too sharply while returning to the road surface. • It may be safer to stay on the apron or shoulder of the road and slow down gradually before returning to the pavement.
JOBNAME: No Job Name PAGE: 172 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og the emergency . Excessive steering will result in less vehicle control, not more. Additionally , smooth variations of the accelerator and/or brake pedal pressure should be utilized if changes in vehicle speed are called for .
JOBNAME: No Job Name PAGE: 173 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og After driving through mud, clean off residue stuck to the driveshafts and tires. Excess mud stuck on tires and rotating driveshafts causes an imbalance that could damage drive components.
JOBNAME: No Job Name PAGE: 174 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og When braking, apply the brakes as you normally would. In order to allow the anti-lock brake system (ABS) to operate properly , keep steady pressure on the brake pedal.
JOBNAME: No Job Name PAGE: 175 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og HAZARD FLASHER The hazard flasher is located on the steering column, just behind the steering wheel. The hazard flashers will operate when the ignition is in any position or if the key is not in the ignition.
JOBNAME: No Job Name PAGE: 176 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og The fuel pump shut-off switch is located under the right-hand side of the glove box, just above the carpet. T o reset the switch: 1. T urn the ignition OFF .
JOBNAME: No Job Name PAGE: 177 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og Standard fuse amperage rating and color COLOR Fuse rating Mini fuses Standard fuses Maxi fuses Cartridge maxi fuses Fuse link cartridge 2A Grey Grey — — — 3A Violet Violet — — — 4A Pink Pink — — — 5A T an T an — — — 7.
JOBNAME: No Job Name PAGE: 178 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og The fuses are coded as follows: Fuse/Relay Location Fuse Amp Rating Passenger Compartment Fuse Pane.
JOBNAME: No Job Name PAGE: 179 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og Fuse/Relay Location Fuse Amp Rating Passenger Compartment Fuse Panel Description 10 10A Cluster (RU.
JOBNAME: No Job Name PAGE: 180 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og Fuse/Relay Location Fuse Amp Rating Passenger Compartment Fuse Panel Description 30 5A Power mirror.
JOBNAME: No Job Name PAGE: 181 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og 2.3L engine (if equipped) The high-current fuses are coded as follows: Fuse/Relay Location Fuse Amp.
JOBNAME: No Job Name PAGE: 182 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og Fuse/Relay Location Fuse Amp Rating Power Distribution Box Description 12 — Not used 13 30A** Blo.
JOBNAME: No Job Name PAGE: 183 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og Fuse/Relay Location Fuse Amp Rating Power Distribution Box Description 40 — Not used 41 10A* Automatic transmission 42 7.
JOBNAME: No Job Name PAGE: 184 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og 3.0L and 4.0L engines (if equipped) The high-current fuses are coded as follows: Fuse/Relay Locatio.
JOBNAME: No Job Name PAGE: 185 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og Fuse/Relay Location Fuse Amp Rating Power Distribution Box Description 12 — Not used 13 30A** Blo.
JOBNAME: No Job Name PAGE: 186 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og Fuse/Relay Location Fuse Amp Rating Power Distribution Box Description 40 — Not used 41 10A* Automatic transmission 42 7.
JOBNAME: No Job Name PAGE: 187 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og Have a flat serviced by an authorized dealer in order to prevent damage to the TPMS sensor , refer to Changing tires with TPMS in the T ires, Wheels and Loading chapter .
JOBNAME: No Job Name PAGE: 188 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og • Use snow chains on the end of the vehicle with the dissimilar spare tire • Use more than one .
JOBNAME: No Job Name PAGE: 189 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og • T owing a trailer • Driving vehicles equipped with a camper body • Driving vehicles with a load on the cargo rack Drive cautiously when using a full-size dissimilar spare tire/wheel and seek service as soon as possible.
JOBNAME: No Job Name PAGE: 190 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og When connecting the jack handle, assemble the following: • one handle extension and one typical extension. T o assemble, slide parts together . T o disconnect, depress button and pull apart.
JOBNAME: No Job Name PAGE: 191 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og 3. Insert the square end of the jack handle into the rear access hole located just above the rear bumper and below the tailgate. Forward motion will stop and resistance to turning will be felt when properly engaged.
JOBNAME: No Job Name PAGE: 192 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og 1. Park on a level surface, activate hazard flashers and place gearshift lever in P (Park) (automatic transmission) or 1 (First) (manual transmission).
JOBNAME: No Job Name PAGE: 193 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og • Front • Rear Never use the differential as a jacking point. It is too easy for the vehicle to tilt or fall and you can be injured. 7. Remove the wheel lug nuts with the lug wrench.
JOBNAME: No Job Name PAGE: 194 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og 10. Remove the jack and fully tighten the lug nuts, in the order shown. Refer to Wheel lug nut torque specifications later in this chapter for the proper lug nut torque specification.
JOBNAME: No Job Name PAGE: 195 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og WHEEL LUG NUT TORQUE SPECIFICATIONS Retighten the lug nuts to the specified torque within 100 miles (160 km) after any wheel disturbance (rotation, flat tire, wheel removal, etc.
JOBNAME: No Job Name PAGE: 196 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og 4. Check whether coolant or steam is escaping from under the hood or from the engine compartment. • If steam is coming from the engine compartment: do not go near the front of the vehicle.
JOBNAME: No Job Name PAGE: 197 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og Preparing your vehicle When the battery is disconnected or a new battery is installed, the automatic transmission must relearn its shift strategy . As a result, the transmission may have firm and/or soft shifts.
JOBNAME: No Job Name PAGE: 198 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og 2. Connect the other end of the positive (+) cable to the positive (+) terminal of the assisting battery . 3. Connect the negative (-) cable to the negative (-) terminal of the assisting battery .
JOBNAME: No Job Name PAGE: 199 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og 4. Make the final connection of the negative (-) cable to an exposed metal part of the stalled vehicle’ s engine, away from the battery and the fuel injection system.
JOBNAME: No Job Name PAGE: 200 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og Removing the jumper cables Remove the jumper cables in the reverse order that they were connected. 1. Remove the jumper cable from the ground metal surface.
JOBNAME: No Job Name PAGE: 201 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og 3. Remove the jumper cable from the positive (+) terminal of the booster vehicle’ s battery . 4. Remove the jumper cable from the positive (+) terminal of the disabled vehicle’ s battery .
JOBNAME: No Job Name PAGE: 202 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og WRECKER TOWING If you need to have your vehicle towed, contact a professional towing service or , if you are a member of a roadside assistance program, your roadside assistance service provider .
JOBNAME: No Job Name PAGE: 203 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og CUSTOMER ASSISTANCE (U.S.A. MAINLAND AND HAWAII) Y our complete and permanent satisfaction is our business. W e are here to serve you. All Authorized Mazda Dealers have the knowledge and the tools to keep your Mazda vehicle in top condition.
JOBNAME: No Job Name PAGE: 204 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og 4. Purchase date and current mileage 5. Y our authorized dealer’ s name and location 6. Y our question(s) If you live outside the U.S.A., please contact your nearest Mazda Distributor .
JOBNAME: No Job Name PAGE: 205 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og 6. Y our authorized dealer’ s name and location 7.
JOBNAME: No Job Name PAGE: 206 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og 235 Y orkland Boulevard, Suite 407 North Y ork, Ontario M2J 4Y8 http://camvap.ca Regional Offices Regional Offices Areas Covered Mazda Canada Inc. W estern Region 8171 Ackroyd Road Suite 2000 Richmond, B.
JOBNAME: No Job Name PAGE: 207 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og by the CUSTOMER RELA TIONS, SALES, SERVICE, or P ARTS MANAGER, then please contact the GENERAL MANAGER of the authorized dealer or the OWNER.
JOBNAME: No Job Name PAGE: 208 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og California Civil Code Section 1793.22(b) presumes that the manufacturer has had a reasonable number.
JOBNAME: No Job Name PAGE: 209 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og GUAM (d.b.a. T riple J. Enterprises, Inc.) P .O. Box 6066 T amuning, Guam TEL: (671) 646–9216 SAIP AN Pacific International Marianas, Inc. (d.b.a. Midway Motors) P .
JOBNAME: No Job Name PAGE: 210 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og The differences may make it difficult or even impossible for your vehicle to receive satisfactory servicing in other countries. W e strongly recommend that you NOT take your Mazda outside the United States.
JOBNAME: No Job Name PAGE: 211 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og Please refer to your manufacturers warranty booklet for more information. ADD-ON NON-GENUINE PARTS AND ACCESSORIES Non-genuine parts and accessories for Mazda vehicles can be found in stores.
JOBNAME: No Job Name PAGE: 212 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og PUBLICA TION ORDER NUMBER PUBLICA TION DESCRIPTION 9999 95 022B 06 WORKSHOP MANUAL 9999 95 020G 06 .
JOBNAME: No Job Name PAGE: 213 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og Mazda North American Operations 7755, Irvine Center Drive Irvine, California 92618–2922 P .O. Box 19734 Irvine, CA 92623–9734 Customer Assistance Center or toll free at 1 (800) 222–5500 If you live outside of the U.
JOBNAME: No Job Name PAGE: 214 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og W ASHING THE EXTERIOR W ash your vehicle regularly with cool or lukewarm water and a neutral pH shampoo. • Never use strong household detergents or soap, such as dish washing or laundry liquid.
JOBNAME: No Job Name PAGE: 215 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og • Remove particles such as bird droppings, tree sap, insect deposits, tar spots, road salt and industrial fallout before repairing paint chips. • Always read the instructions before using the products.
JOBNAME: No Job Name PAGE: 216 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og • 2.3L Engine • 3.0L Engine 2.3L 16 VALVE art=ranmc723_e art=ranmc704_b REVIEW COPY —— 2007.
JOBNAME: No Job Name PAGE: 217 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og • 4.0L Engine • Never wash or rinse the engine while it is running; water in the running engine may cause internal damage. PLASTIC (NON-PAINTED) EXTERIOR PARTS Use only approved products to clean plastic parts.
JOBNAME: No Job Name PAGE: 218 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og a special solution in addition to alcohol which helps to remove the hot wax deposited on the wiper blade and windshield from automated car wash facilities.
JOBNAME: No Job Name PAGE: 219 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og • If a solvent ring forms on the fabric after spot cleaning, clean the entire area immediately (but do not oversaturate) or the ring will set.
JOBNAME: No Job Name PAGE: 220 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og INTRODUCTION Be extremely careful to prevent injury to yourself and others or damage to your vehicle when using this manual for inspection and maintenance.
JOBNAME: No Job Name PAGE: 221 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og CHART SYMBOLS I : Inspect and if necessary , correct, clean or replace A Adjust R : Replace L : Lubricate Normal driving service intervals — perform at the months or distances shown, whichever occurs first.
JOBNAME: No Job Name PAGE: 222 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og Maintenance Item Maintenance Interval (Number of months or Miles (km), whichever comes first) Month.
JOBNAME: No Job Name PAGE: 223 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og *5 The California Air Resources Board has determined that the failure to perform this maintenance item will not nullify the emission warranty nor limit recall liability prior to completion of the vehicle’ s useful life.
JOBNAME: No Job Name PAGE: 224 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og Maintenance Item Maintenance Interval (Number of months or Miles (km), whichever comes first) Month.
JOBNAME: No Job Name PAGE: 225 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og SCHEDULE 2 — SPECIAL OPERATING CONDITIONS If your driving habits FREQUENTL Y include one or more of the following conditions: • Short trips of less than 10 miles (16 km) when outside temperatures remain below freezing.
JOBNAME: No Job Name PAGE: 226 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og Special Operating Conditions Replace Engine Oil and Filter Inspect Brake System Replace Fuel Filter.
JOBNAME: No Job Name PAGE: 227 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og • Note any changes in the sound of the exhaust or any smell or exhaust fumes in the vehicle.
JOBNAME: No Job Name PAGE: 228 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og • Check battery water level (non-maintenance free).
JOBNAME: No Job Name PAGE: 229 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og 3. Block the wheels. Working with the engine on • Automatic transmission: 1. Set the parking brake and shift to P (Park). 2. Block the wheels. • Manual transmission: 1.
JOBNAME: No Job Name PAGE: 230 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og IDENTIFYING COMPONENTS IN THE ENGINE COMPARTMENT 2.3L I4 engine 1. W indshield washer fluid reservoir 2. Engine coolant reservoir 3. Engine oil dipstick 4.
JOBNAME: No Job Name PAGE: 231 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og 3.0L V6 engine 1. Engine coolant reservoir 2. W indshield washer fluid reservoir 3. Engine oil filler cap 4. T ransmission fluid dipstick (automatic transmission) 5.
JOBNAME: No Job Name PAGE: 232 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og 4.0L SOHC V6 engine 1. W indshield washer fluid reservoir 2. T ransmission fluid dipstick (automatic transmission) 3. Engine oil filler cap 4. Engine oil dipstick 5.
JOBNAME: No Job Name PAGE: 233 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og WINDSHIELD WASHER FLUID Add fluid to fill the reservoir if the level is low . In very cold weather , do not fill the reservoir completely . Only use a washer fluid that meets Mazda specification .
JOBNAME: No Job Name PAGE: 234 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og Check the wiper blades for wear at least twice a year or when they seem less effective. Substances such as tree sap and some hot wax treatments used by commercial car washes reduce the effectiveness of wiper blades.
JOBNAME: No Job Name PAGE: 235 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og • 2.3L I4 engine • 3.0L V6 engine MAX MIN art=ranmc135_d art=ranmc156_a REVIEW COPY —— 2007.
JOBNAME: No Job Name PAGE: 236 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og • 4.0L SOHC V6 engine 6. W ipe the indicator clean.
JOBNAME: No Job Name PAGE: 237 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og • 3.0L V6 engine SAE 5W -20 • 4.0L SOHC V6 engine SAE 5W -30 • Oil levels above the MAX mark or upper hole may cause engine damage. Some oil must be removed from the engine by an authorized dealer .
JOBNAME: No Job Name PAGE: 238 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og Adding engine oil 1. Check the engine oil. For instructions, refer to Checking the engine oil in this chapter . 2. If the engine oil level is not within the normal range, add only certified engine oil of the recommended viscosity .
JOBNAME: No Job Name PAGE: 239 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og Change your engine oil and filter according to the appropriate schedule listed in scheduled maintenance. Do not use supplemental engine oil additives, oil treatments or engine treatments.
JOBNAME: No Job Name PAGE: 240 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og It is recommended you use the appropriate Mazda oil filter (or another brand meeting Mazda specifications) for your engine.
JOBNAME: No Job Name PAGE: 241 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og W ARNING: When lifting a plastic-cased battery , excessive pressure on the end walls could cause acid to flow through the vent caps, resulting in personal injury and/or damage to the vehicle or battery .
JOBNAME: No Job Name PAGE: 242 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og will not affect function or durability of the transmission. Over time the adaptive learning process will fully update transmission operation to its optimum shift feel.
JOBNAME: No Job Name PAGE: 243 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og • 2.3L engine • 3.0L & 4.0L engines art=ranmc146_a art=ranmc108_a REVIEW COPY —— 2007 B.
JOBNAME: No Job Name PAGE: 244 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og When the engine is cold, check the level of the engine coolant in the reservoir .
JOBNAME: No Job Name PAGE: 245 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og W ARNING: Do not put engine coolant in the windshield washer fluid reservoir . If engine coolant is sprayed onto the windshield, it could make it difficult to see through the windshield.
JOBNAME: No Job Name PAGE: 246 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og 5. Fill the coolant reservoir slowly with the proper coolant mixture (see above), to within the “COLD FILL RANGE” or the “FULL COLD” level on the reservoir .
JOBNAME: No Job Name PAGE: 247 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og • NEVER increase the coolant concentration above 60%. • Increased engine coolant concentrations above 60% will decrease the overheat protection characteristics of the engine coolant and may cause engine damage.
JOBNAME: No Job Name PAGE: 248 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og WHAT YOU SHOULD KNOW ABOUT AUTOMOTIVE FUELS Important safety precautions W ARNING: Do not overfill the fuel tank. The pressure in an overfilled tank may cause leakage and lead to fuel spray and fire.
JOBNAME: No Job Name PAGE: 249 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og • A void getting fuel liquid in your eyes. If fuel is splashed in the eyes, remove contact lenses (if worn), flush with water for 15 minutes and seek medical attention.
JOBNAME: No Job Name PAGE: 250 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og Fuel Filler Cap Y our fuel tank filler cap has an indexed design with a 1/4 turn on/off feature. When fueling your vehicle: 1. T urn the engine off. 2.
JOBNAME: No Job Name PAGE: 251 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og prohibited by law and could damage your vehicle. Do not use fuel containing methanol.
JOBNAME: No Job Name PAGE: 252 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og Many of the world’ s automakers approved the W orld-wide Fuel Charter that recommends gasoline specifications to provide improved performance and emission control system protection for your vehicle.
JOBNAME: No Job Name PAGE: 253 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og empty . Empty reserve is the small amount of fuel remaining in the fuel tank after the fuel gauge indicates empty . The amount of usable fuel in the empty reserve varies and should not be relied upon to increase driving range.
JOBNAME: No Job Name PAGE: 254 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og economy under current driving conditions. Additionally , keeping records during summer and winter will show how temperature impacts fuel economy . In general, lower temperatures give lower fuel economy .
JOBNAME: No Job Name PAGE: 255 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og • Perform all regularly scheduled maintenance items. Follow the recommended maintenance schedule and owner maintenance checks found in scheduled maintenance.
JOBNAME: No Job Name PAGE: 256 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og • Use only the specified fuel listed. • A void running out of fuel. • Do not turn off the ignition while your vehicle is moving, especially at high speeds.
JOBNAME: No Job Name PAGE: 257 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og Board Diagnostics System (OBD-II). The OBD-II system protects the environment by ensuring that your vehicle continues to meet government emission standards.
JOBNAME: No Job Name PAGE: 258 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og If the vehicle’ s engine or transmission has just been serviced, or the battery has recently run down or been replaced, the OBD-II system may indicate that the vehicle is not ready for I/M testing.
JOBNAME: No Job Name PAGE: 259 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og POWER STEERING FLUID • 2.3L I4 engine • 3.0L V6 engine • 4.0L V6 engine Check the power steering fluid. Refer to the service maintenance section for the service interval schedules.
JOBNAME: No Job Name PAGE: 260 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og 1. Start the engine and let it run until it reaches normal operating temperature (the engine coolant temperature gauge indicator will be near the center of the normal area between H and C).
JOBNAME: No Job Name PAGE: 261 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og CLUTCH FLUID (IF EQUIPPED) Check the fluid level. Refer to scheduled maintenance for the service interval schedules. During normal operation, the fluid level in the clutch reservoir should remain constant.
JOBNAME: No Job Name PAGE: 262 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og 2. If driven in hot weather , city traffic, pulling a trailer , allow transmission to cool for 30 minutes before checking. 3. Engage parking brake, start engine.
JOBNAME: No Job Name PAGE: 263 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og Checking and adding manual transmission fluid (if equipped) 1. Park the vehicle on a level surface. 2. Engage the parking brake fully – put in first gear .
JOBNAME: No Job Name PAGE: 264 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og T RANSFER CASE FLUID (IF EQUIPPED) 1. Park the vehicle on a level surface. 2. Engage the parking brake fully – put in first gear . 3. Ensure the vehicle cannot move.
JOBNAME: No Job Name PAGE: 265 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og CHECKING AND ADDING REAR DIFFERENTIAL FLUID 1. Park the vehicle on a level surface. 2. Engage the parking brake fully – put in first gear . 3. Assure the vehicle cannot move.
JOBNAME: No Job Name PAGE: 266 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og MAINTENANCE PRODUCT SPECIFICATIONS AND CAPACITIES Item Application Mazda part name or equivalent Ca.
JOBNAME: No Job Name PAGE: 267 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og Item Application Mazda part name or equivalent Capacity Engine coolant 2.3 L I4 engine with manual transmission Premium Engine Coolant 2 10.5 quarts (10.
JOBNAME: No Job Name PAGE: 268 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og Item Application Mazda part name or equivalent Capacity Power steering fluid All MERCON t AT F Fill between MAX / MIN line on reservoir T ransfer case fluid (4X4) 4x4 V ehicles 1.
JOBNAME: No Job Name PAGE: 269 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og Item Application Mazda part name or equivalent Capacity Fuel tank Regular cab (Short wheel base) — 17 gallons (64.
JOBNAME: No Job Name PAGE: 270 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og ENGINE SPECIFICA TIONS Engine 2.3L I4 engine 3.0L V6 engine 4.0L V6 engine Cubic inches 138 182 245 Required fuel 87 octane 87 octane 87 octane Firing order 1-3-4-2 1-4-2-5-3-6 1-4-2-5-3-6 Spark plug gap 0.
JOBNAME: No Job Name PAGE: 271 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og • 3.0L V6 Engine with A/C • 4.0L V6 Engine art=ranmc201_a art=ranmc200_a REVIEW COPY —— 200.
JOBNAME: No Job Name PAGE: 272 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og IDENTIFYING YOUR VEHICLE Safety Compliance Certification Label The National Highway T raffic Safety.
JOBNAME: No Job Name PAGE: 273 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og The V ehicle Identification Number (VIN) contains the following information: 1. W orld manufacturer identifier 2. Brake system / Gross V ehicle W eight Rating (GVWR) / Restraint System 3.
JOBNAME: No Job Name PAGE: 274 SESS: 1 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og CELL PHONES Use of cell phones and other devices by driver: W ARNING: Use of any electrical devices such as cell phones, computers, portable radios, vehicle navigation or other devices by the driver while the vehicle is moving is dangerous.
JOBNAME: No Job Name PAGE: 275 SESS: 3 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og A ABS (see Brakes) .....................158 Airbag supplemental restraint system .......................................... 91 and child safety seats .
JOBNAME: No Job Name PAGE: 276 SESS: 3 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og Clock adjust AM/FM Stereo ........................... 19 AM/FM stereo CD ............... 21, 24 Premium AM/FM stereo CD6/MP3 .........................
JOBNAME: No Job Name PAGE: 277 SESS: 3 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og running out of fuel ................. 252 safety information relating to automotive fuels ..................... 248 Fuel pump shut-off switch .......175 Fuses .
JOBNAME: No Job Name PAGE: 278 SESS: 3 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og lubricant specifications .......... 266 reverse ..................................... 167 Mirrors ......................................... 60 fold away .
JOBNAME: No Job Name PAGE: 279 SESS: 3 OUTPUT: Thu Aug 3 11:45:36 2006 /ford_pdm/ford/own2002/mbs/og Special notice ambulance conversions .............. 7 utility-type vehicles .................... 6 Specification chart, lubricants . 266 Speed control .
Ein wichtiger Punkt beim Kauf des Geräts Mazda 2007 B2300 Truck (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Mazda 2007 B2300 Truck noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Mazda 2007 B2300 Truck - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Mazda 2007 B2300 Truck reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Mazda 2007 B2300 Truck erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Mazda 2007 B2300 Truck besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Mazda 2007 B2300 Truck verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Mazda 2007 B2300 Truck. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Mazda 2007 B2300 Truck gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
