Benutzeranleitung / Produktwartung 2005 3 4-DOOR des Produzenten Mazda
Zur Seite of 322
Black plate (1,1) Mazda3_8T66-EA-04H_Edition1 Page1 Thursday , June 24 2004 5:17 PM Form No.8T66-EA-04H.
Black plate (2,1) Mazda3_8T66-EA-04H_Edition1 Page2 Thursday , June 24 2004 5:17 PM Form No.8T66-EA-04H.
Black plate (3,1) Thank you for choosing a Mazda. W e at Mazda design and buil d vehicles with complete customer satisfaction in mind. T o help ensure enjoyable and trouble-free operat ion of your Mazda, read this manual carefully and follow its recommendations.
Black plate (4,1) W e want to help you get the most driving pleasure from your vehicle. Y our owner's manual, when read from cover to cover, can do that in many ways. Illustrations complement the words of the manual to best explain how to enjoy your Mazda.
Black plate (5,1) Mazda3_8T66-EA-04H_Edition1 Page5 Thursday , June 24 2004 5:17 PM Form No.8T66-EA-04H T able of Contents Y our V ehicle at a Glance Interior , exterior views and part identification of your Mazda. 1 Essential Safety Equipment Use of safety equipment, including seats, seat belt system, SRS air bags and child-restraint systems.
Black plate (6,1) Mazda3_8T66-EA-04H_Edition1 Page6 Thursday , June 24 2004 5:17 PM Form No.8T66-EA-04H.
Black plate (7,1) 1 Y our V ehicle at a Glance Interior , exterior views and part identification of your Mazda. Dashboard and Interior Overv iew ..................... ...................... ... 1-2 Exterior Overview ...................................
Black plate (8,1) The equipment and installation position varies according to model and grade. 1-2 Y our V ehicle at a Glance Dashboard and Interior Overview Mazda3_8T66-EA-04H_Edition1 Page8 Thursday , June 24 2004 5:17 PM Form No.
Black plate (9,1) Rear seat ................................... .................................................. ......................... page 2-5 Front seats .........................................................................................
Black plate (10,1) The equipment and installation position varies according to model and grade. 4 Door 1-4 Y our V ehicle at a Glance Exterior Overview Mazda3_8T66-EA-04H_Edition1 Page10 Thursday , June 24 2004 5:17 PM Form No.
Black plate (11,1) Doors and keys ............... ....................................................... .............................. page 3-2 Child safety locks ................................................... ..................................
Black plate (12,1) The equipment and installation position varies according to model and grade. 5 Door 1-6 Y our V ehicle at a Glance Exterior Overview Mazda3_8T66-EA-04H_Edition1 Page12 Thursday , June 24 2004 5:17 PM Form No.
Black plate (13,1) Doors and keys ............... ....................................................... .............................. page 3-2 Child safety locks ................................................... ..................................
Black plate (14,1) 1-8 Mazda3_8T66-EA-04H_Edition1 Page14 Thursday , June 24 2004 5:17 PM Form No.8T66-EA-04H.
Black plate (15,1) 2 Essential Safety Equipment Use of safety equipment, including seats, seat belt system, SRS air bags and child-restraint systems. Seats .......................................................... ....................................
Black plate (16,1) Front Seats W ARNING Modification of the Fr ont Seats: Modifying or replacing the front seats such as replacing the up holstery or loosening any bolts is d angerous. The front seats contain air bag components essential to the supplemental restraint system.
Black plate (17,1) q Seat Recline W ARNING Reclining: Sitting in a reclined posit ion while the vehicle is movin g is dangerous because you don't get the full protection from seat belts. Duri ng sudden braking or a collision , you can slide under the lap belt and su ffer serious internal injuries.
Black plate (18,1) q Height Adjustment (Driver's Seat) í By moving the seat lever up or down, the seat bottom height can be adjusted. Down Up q Lumbar Support Adjustment (Driver's Seat) í T o adjust the lumbar support, pull the lever forward.
Black plate (19,1) Rear Seat W ARNING Stacking Cargo: Stacking luggage or other cargo higher than the seatbacks, and placing articles on the rear package tray or on the luggage compartment cover is dangerous. During sudden braki ng or a collision, objects can fly around and become projectiles that may hit and injure passengers.
Black plate (20,1) NOTE When returning a rear seat to its original position, also replace the seat belt to its normal position. V erify that the seat belt pulls and retracts. q Split-Folding Rear Seatback T o fold the seatbacks CAUTION When operating the rear seatb ack knob, make sure you suppor t the seatback with your hand.
Black plate (21,1) W ARNING Seat Belts Caught Under Seatbacks: A seat belt caugh t under a seatback after the seatback is retur ned to its upright position is dangerou s. In a collision or sudden stop, the seat belt cannot provide adequate protectio n.
Black plate (22,1) Height adjustmen t T o raise a head restraint, pull it up to the locked position. T o lower the head restraint, press the stop- catch release, then push the head restraint down. Adjust the head restraint so that the top is parallel with the top of the passenger's ears, never the passenger's neck.
Black plate (23,1) Seat Belt Precautions Seat belts help to d ecrease the possibility of severe injury during acciden ts and sudden stops. Mazda recommends that the driver and all passengers always wear seat belts. All of the seat belt retr actors are designed to keep the lap/shoul der belts out of the way when not in use.
Black plate (24,1) W ARNING Not W earing Seat Belts: Not wearing a seat belt is extremel y dangerous. During a coll ision, occupants not wearing seat belts could hit someone or things insi de the vehicle or even be throw n out of the vehicle. They could be seriously injure d or even killed.
Black plate (25,1) q Pregnant W omen and Persons with Serious Medical Conditions Pregnant women should wear seat belts. Ask your doctor for speci fic recommendatio ns. The lap belt should be worn SNUGL Y AND AS LOW AS POSSIBLE OVER THE HIPS. The shoulder belt should be worn across your shoulder properly , but never across the stomach area.
Black plate (26,1) 3-Point T ype Seat Belt NOTE When using the rear center seat belt, refer to “ Rear Center Po sition Seat Belt ” (page 2-16). q Fastening the Seat Belts 1. Grasp the buckle and tongue. 2. Slowly pull out the lap/shoul der belt. Tongue Belt 3.
Black plate (27,1) q Unfastening the Seat Belts Depress the button on the buckle. NOTE If a belt does not fully retract, inspect it for kinks and twists.
Black plate (28,1) Front Seat Belt Pretensioner and Load Limiting Systems For optimum protection, the driver and front passenger seat belts are equipped with pretensioner and load limiting systems. In moderate or greater frontal or near- frontal accidents, the front air bag and pretensioner systems deploy simultaneously .
Black plate (29,1) W ARNING Pretensioner System Disposal: Improper disposal of the prete nsioner system or a vehicle with non- deactivated pretensioner s is dangerous.
Black plate (30,1) q Air Bag/Front Seat Belt Pretensioner System W arning Beep If a malfunction is detected in the air bag/ front seat belt prete nsioner systems and the warning light, a warning beep sound will be heard for about 5 seconds every minute.
Black plate (31,1) W ARNING Fastening the Rear-Cen ter Seat Belt with Only One Buckle: Fastening the rear-center seat belt with only one buckle is dan gerous. If only one pair of seat belt tongue and buckle, either tongue (A ) and anchor buckle (B) or tongue (C) and anchor buckle (D), is fastened, the seat belt cannot provide full protection.
Black plate (32,1) NOTE T o encourage rear seat passengers to wear their seat belt s, we suggest leavi ng the rear center lap position of the belt fastened at all times ex cept when folding the rear seat forward. q Fastening the Lap Portion of the Seat Belt Grasp tongue (A) and inser t it into the anchor buckle (B) until you hear a click.
Black plate (33,1) W ARNING Using an Extender That is T oo Long: Using an extender that is too long is dangerous. The seat belt will not fit properly. In an accident, the seat belt will not provide adequate protectio n and you could be seriously injured.
Black plate (34,1) q Belt Minder The belt minder is a suppl emental warning to the seat belt war ning function. This feature provides additional reminders to the driver that the driver's seat belt is not fastened by intermittentl y sounding a beep sound and flashing the seat belt warning light in the instrument cluster .
Black plate (35,1) Child Restraint Precautions Mazda strongly urges the use of chil d-restraint systems for children small enough to use them. Y ou are required by law to use a child-restraint system for children in the U.
Black plate (36,1) W ARNING Proper Size of Child-Restraint System: For effective protection in vehicle accidents and sudden stops, a c hild must be properly restrained using a seat belt or child -restraint system dependi ng on age and size. If not, the child could be seriously injur ed or even killed in an accident.
Black plate (37,1) W ARNING Seating Children in a Child-Res traint System on the Fron t Passenger Seat: If your vehicle is equipped with front passenger seat weight sensors, a front passenger air bag deactivation indicator light is also equipped (page 2-29).
Black plate (38,1) W ARNING One Belt, One Passenger: Using one seat belt for more than one person at a time is dangerous. A seat belt used in this way can't spread the impact forces properly and the two passengers could be crushed together and seriously injur ed or even killed.
Black plate (39,1) Installing Child-Restraint Systems Accident statistics reveal that a child is safer in the rear seat. The front passenger's seat is clearly the worst choice for any child under 12, and wi th rear-facing child- restraint systems it is clear ly unsafe due to air bags.
Black plate (40,1) 3. T o get the retractor into the automati c locking mode, pull the shoulder belt portion of the seat belt until the entire length of the belt is out of the retractor . 4. Push the child-res traint system firmly into the vehicle seat.
Black plate (41,1) Anchor bracket locat ion (5 Door outboard position) T ether strap position (5 Door outboard position) T ether strap Anchor bracke t location (5 Door cen ter position) T ether strap .
Black plate (42,1) q If Y ou Must Use the Front Seat for Children If you cannot put all c hildren in the rear seat, at least put the smalles t children in the rear and be sure the largest child up front uses the shoulde r belt over the shoulder . Do not put rear-facing child-restrai nt systems on the front passenger's seat.
Black plate (43,1) W ARNING Children and Seating Posit ion with Side and Curtain Air Bags: Allowing anyone to lean over or against the front door , the area of the front seat, front and rear wi ndow pillars and the roof edg e along both sides from which the side and curtain air bags deploy, even though using a child-restraint syst em, is dangerous.
Black plate (44,1) 5. Make sure the front passenger air bag deactivation indicator light illumin ates after installing a child-res traint system on the front passenger seat.
Black plate (45,1) LA TCH Child-Restraint Systems Y our Mazda is equipped with LA TCH lower anchors for attachment of speci ally designed LA TCH child-res traint systems in the rear outboard seats . Both anchors must be used, otherwise the seat will bounce around and put the child in danger.
Black plate (46,1) q Child-Restraint System Installation Procedure (Rear Outboard Seats) 1. Make sure the seatback is securely latched by pushing it back until it is fully locked. 2. Expan d the area between the seat bottom and the seatback slightly to verify the locations of the LA TCH lower anchors.
Black plate (47,1) T ether strap position (5 Door ) T ether strap W ARNING Child-Restraint T ether Usage: Using the tethe r or tether anchor to secure anything but a child-rest raint system is dangerous. This could weaken or damage the tethe r or tether anchor and result in injur y .
Black plate (48,1) 2. Expan d the area between the seat bottom and the seatback slightly to verify the locations of the LA TCH lower anchors. NOTE The markings above the LA TCH lowe r anchors indicate the locations of LA TCH lower anchors for the attachment of a child-res traint system.
Black plate (49,1) T ether strap position (5 Door ) T ether strap W ARNING Child-Restraint T ether Usage: Using the tethe r or tether anchor to secure anything but a child-rest raint system is dangerous. This could weaken or damage the tethe r or tether anchor and result in injur y .
Black plate (50,1) Supplemental Restraint Systems (SRS) Precautions The front and side supplemental rest raint systems (SRS) include up to 6 air bags (verify “ SRS AIRBAG ” location indicator mark s).
Black plate (51,1) W ARNING Air Bags without Seat Belts: Depending only on the air bags for protection during an accide nt is dangerous. Alone, air bags may not prevent serious injur ies. The appropriate air bags can be expect ed to inflate only in collisions with front al, near frontal or side forces that are at least moderate.
Black plate (52,1) W ARNING Seating Position with Side and Cur tain Air Bags: Sitting too close to the side air bag modul es or placing hands on them is extre mely dangerous. The side air bags inflate with great force and speed directly out of the outboard side of the front seat and expand along the front door on the side the car is hit.
Black plate (53,1) W ARNING Hot Air Bag Inflators: Hot air bag inflators are dangerous . Immediately after inflation , the inflators in the steering wheel, dashboar d, seatbacks, or the front an d rear window pillars and along the roof edge are very hot.
Black plate (54,1) Supplemental Restraint System Components The supplemental rest raint systems (SRS) have tw o basic subsystems: l The air bag system with inflators and air bags.
Black plate (55,1) q Front Air Bag System Components (4) (8) (7) (5) (8) (2) (9) (3) (1) (6) (1) Front dual stage inflators and air bags (2) Crash sensors and diagnostic modul e (SAS unit) (3) Front a.
Black plate (56,1) q Side and Curtain Air Bag System Components í Put children in the rear seats, they do not have side air bag systems. 4 Door 5 Door (2) (1) (1) (3) (4) (3) (2) (1) (1) (4) (1) Infl.
Black plate (57,1) How the Air Bags W ork q How the Front Air Bags W ork When air bag crash sensor s detect a front al impact of greater than moder ate force, an electrical curren t is sent to the infl ators. Gases are produced to inflate the front air bags and after the inflation, the front air bags quickly deflate.
Black plate (58,1) Front passenger seat weight sensors If your vehicle is equipped with front passenger seat weight sensors, a front passenger air bag deactivation indicator light is also equipp ed (page 2-29). These sensor s are locat ed under both of the front passenger seat rails.
Black plate (59,1) The front passenger air bag deactivation indicator light illuminates or is off under the following conditions: T otal seated weight on the front passenger seat Front passenger air b.
Black plate (60,1) W ARNING Increasing the T otal Seated W eight on the Front Passen ger Seat: When an infant or small child sits on the front passenger seat, increasing the total seated weight on the front passenger seat from the total seated weigh t of approximately 30 kg (66 lb) is dangerous .
Black plate (61,1) NOTE l The system requires about 10 seconds to alte rnate between turning the front passenger front and side air bags and seat belt prete nsioner system on or off.
Black plate (62,1) CAUTION T o prevent damage to the side and curta in air bag wiring, don't place luggage or other objects under the front seats.
Black plate (63,1) Limitations to front air bag activ ation Depending on the severi ty of impact, the front air bags may not inflate in the following cases: l Impacts involving trees or poles cause severe cosmetic damag e but may not have enough impact to activate the air bag.
Black plate (64,1) Side and curtain air bag activation í Greater than moderate impa ct to one side of the vehicle (driver or passenger side areas) will cause the side and curtain air bags to inflate, but it will not normally deploy the front air bags.
Black plate (65,1) q Constant Monitoring The following components of the air bag systems are monitored by a diagno stic system: l SAS unit l Front air bag sensor l Air bag modules l Side crash sensor .
Black plate (66,1) W ARNING Air Bag/Front Seat Belt Pretensioner System W arning Bee p: Driving the vehicle with the air bag/ front seat belt pretensioner system warning beep sounding is dangerous . In a collision, the air bags and the front seat belt pretensioner system will not deploy and this could resul t in death or serious injury.
Black plate (67,1) NOTE If it becomes necess ary to have the components or wi ring system for the supplementary restraint system modified to accommodate a person with certain medical condition s in accordance with a certifie d physician, contact an Authorized Mazda Deal er , refer to “ Customer Assistance (U.
Black plate (68,1) 2-54 Mazda3_8T66-EA-04H_Edition1 Page68 Thursday , June 24 2004 5:17 PM Form No.8T66-EA-04H.
Black plate (69,1) 3 Knowing Y our Mazda Explanation of basic operations and controls; opening/closing and adjustment of various parts. Doors and Locks ........................................... ................................ 3-2 Keys .............
Black plate (70,1) Keys W ARNING Keys and Children: Leaving children in a vehicle with the key is dangerous. This could result in someone being badly injured or even killed. They could play with pow er windows or other controls, or even make the vehicle move.
Black plate (71,1) Keyless Entry System í This system locks and unlocks the doors and the liftgate. It can also help you signal for attention in an emergency . Press the button slowly and accurately . CAUTION T o avoid damage to the transmi tter , do not: l Drop it.
Black plate (72,1) q T ransmitter Panic b utton Lock button Unlock button NOTE l (U.S.A.) This device complies with part 15 of the FCC Rules. Operation is subject to the following two condit ions: (1).
Black plate (73,1) Panic button Y ou can use the panic button to turn on the alarm, which allows you to signal for attention in a n emergency . NOTE The alarm will work whether any door or the liftgate is open or closed.
Black plate (74,1) Replacing the transmitter battery 1. Inser t a small screwdri ver into the slot and gently pry open the trans mitter . Back cov er Slot 2.
Black plate (75,1) Door Locks W ARNING Unattended Children and Pets: Leaving a child or an animal unattended in a parked vehicle is dangerous. In hot weather , temperatures inside a vehicl e can become high enough to cause brain damage or even death. Always take all children and animals with you or leave a responsible person with them.
Black plate (76,1) q Locking, Unlocking with Door - Lock Knob T o lock any door from the inside, push the door-lock knob. T o unlock, pull it out. This does not operate the other door locks. Unlock Lock T o lock any door with the door-lock knob from the outside, push the door-lock knob to the lock position and close the door .
Black plate (77,1) Locking, unlocking with door-lock switch All doors and the liftgate lock automatically when LOCK is pushed. They all unlock when the unmarke d part of the door-lock switch is pushed. Unlock Lock q Rear Door Child Safety Locks These locks are intended to help prevent children from accidentally opening the rear doors.
Black plate (78,1) q Opening and Closing the Liftgate Opening the liftgate Pull the handle and lift up the liftgate. NOTE If the vehicle battery is dead or there is a malfunction in the elect rical system and the liftgate can not be unlocked, perform the follow ing manual procedure as an emergency measure to unlock it: 1.
Black plate (79,1) q Luggage Compartment W ARNING Placing Cargo on the Cover: Placing luggage or other cargo on top of the luggage compartm ent cover is dangerous. During sudden braki ng or a collision, the cargo co uld become a projectile that could hit and injure someone.
Black plate (80,1) CAUTION T o prevent cargo from shifting while driving or during sudden deceleration, be careful of the foll owing: l Do not open the luggage compartment cover while the vehicle is moving. l Do not overload the luggage compartment so that the cover cannot be closed.
Black plate (81,1) q Opening and Closing the T runk W ARNING Open T runk Lid and Children: Leaving the trunk lid open or leaving children in the vehicle with the keys is dangerous. Children could open the trunk lid and climb inside resulting in possible injury or de ath from heat exposure.
Black plate (82,1) q T runk Security In some situations you may want to prevent the trunk from being opened with the remote trunk lid relea se lever . Give your key only to someone you trust. T o secure the trunk lid, lock the rear seatbacks (page 2-7), push the trunk lock lever up, and close the trunk.
Black plate (83,1) Inside T runk Release Slide Lever (4 Door) Y our vehicle is equipped with an inside trunk release slide lever that provi des a means of escape for child ren and adults in the event they become locked inside the trunk.
Black plate (84,1) q Opening the T runk Lid from the Inside Slide the illuminated insi de trunk release slide lever in the direction of the arrow . The lever is made of material that will glow for hours in the darkness of the trunk following a brief exposure to ambient light.
Black plate (85,1) q Operating the Driver's Side Power Window Manual opening/closi ng T o open the window to the desir ed position, lightly hold down the switch.
Black plate (86,1) q Power Window Lock Switch W ith the lock switch in the unlock ed position, all powe r windows on ea ch door can be operated. W ith the lock switch in the locked position, only the driver's side powe r window can be operated.
Black plate (87,1) q Fuel-Filler Lid T o open, pull up the remote fuel-filler lid release. 4 Door Remote fuel-filler lid release 5 Door Remote fuel-filler lid release q Fuel-Filler Cap T o remove the filler cap, turn it counterclockwise. T o close the filler cap, turn it clockw ise until it clicks.
Black plate (88,1) Hood W ARNING Closed and Securely Locked Hood: A hood that is no t closed and securel y locked is dangerou s as it could fly open while the vehicl e is moving and block the driver's visi on which could result in a seriou s accident.
Black plate (89,1) q Closing the Hood 1. Check un der the hood area to make certain all filler caps are in place and all loose items (e.g. tools, oil containers, etc.) have been removed. 2. Inser t the support rod in its clip whi le holding up the hood.
Black plate (90,1) NOTE After washing your Mazda or after a rain, wipe the water off the moonroof before operating it to avoid water penetration which cou ld cause rust and water damage to your headliner. q Tilt Operation The rear of the moonroof can be tilted open to provide more ventilation.
Black plate (91,1) Immobilizer System The optional immobilizer system allows the engine to star t only with a key the system recognizes. If someone attempts to start the engine with an unrecognized key , the eng ine will not start, thereby helping to prevent the theft of your vehicle.
Black plate (92,1) NOTE l (U.S.A.) This device complies with part 15 of the FCC Rules. Operation is subject to the following two condit ions: (1) This device may no t cause harmful interference, and (2) this device must accept any interference recei ved, including interference that may cause undesired operation.
Black plate (93,1) NOTE l If the security indicator light comes on and stays on when the ignition switch is turned to the ON posit ion, the engine will not start. l Signals from a TV or radio station, or from a transceiver or a mobi le telephone, could inte rfere with your immobilizer system.
Black plate (94,1) Theft-Deterrent System í The optional theft-deterren t system is designed to prevent your vehicle or its contents from being stol en when all the doors, hood, and trunk lid/liftgate are locked. If forcible entry is attempt ed, the system sounds the horn and flashes the hazard warning lights.
Black plate (95,1) q T o Stop an Alarm A triggered alarm can be turned off by any one of the following methods: l Unlock a door or the trunk lid with the key . l Press the unlock button on the keyles s entry system transmitter . NOTE If you have any proble m with the theft- deterrent system, consul t an Authorized Mazda Dealer .
Black plate (96,1) Steering Wheel W ARNING Adjusting the Steering Wheel : Adjusting the steering wheel while the vehicle is movin g is dangerous. Moving it can very easily cau se the driver to abruptly turn to the left or right. This can lead to loss of contro l or an accident.
Black plate (97,1) T o adjust: 1. Move the selector switch to the left or right to choose the left or right side mirror . 2. Depre ss the mirror switch in the appropriate direction. Mirror switch Outside mirror Selector switch After adjusting the mirror, lock the control by moving the selec tor switch to the middle position.
Black plate (98,1) W ARNING Blocked V iew: Cargo stacked higher than the seatbacks is dangerous. It can block your view in the rearview mirror , which might cause you to hit another car when changing lanes. Don't stack things higher than the seatb acks.
Black plate (99,1) 4 Before Driving Y our Mazda Important information about driving your Mazda. Fuel and Engine Exhaust Precautions ........ ................................ 4-2 Fuel Requirements .................................... ..................
Black plate (100,1) Fuel Requirements V ehicles wi th catalytic convert ers or oxygen sensors must use ONL Y UNLEADE D FUEL, which will reduce exhaust emissions and keep spark plug fouling to a minimum. Y our Mazda will perform best with fuel listed in the table.
Black plate (101,1) Emission Control System Y our vehicle is equipped with an emission con trol system (the catalytic convert er is part of this system) that enables your vehicle to comply with existing exhaust emi ssions requirements.
Black plate (102,1) NOTE After driving some distance and turnin g off the engine , the sound of a valve openin g and closing can be heard at the rear of the right side of the vehicle, however this does not indicate an abnormality . Y our vehicle has a self-checking device and it ope rates after turning off the engine .
Black plate (103,1) Engine Exhaust (Carbon Monoxide) W ARNING Carbon Monoxide: Engine exhaust gas is dangerous. This gas contains carbon monoxide (C O), which is colorless, odorless, and po isonous. When inhaled , it can cause loss of consciousness and death.
Black plate (104,1) Before Getting In l Be sure the window s, outside mirrors , and outside lights are clean. l Inspect inflation press ures and condition of tires. l Look under the vehicl e for any sign of a leak. l If you plan to back up, make sure nothing is in your way .
Black plate (105,1) Break-In Period No special break-in is necessary , but a few precautions in the first 1, 000 km (600 miles) may add to the performance, economy , and life of your Mazda. l Don't race the engine. l Don't maintain one constant speed, either slow or fast , for a long perio d of time.
Black plate (106,1) Hazardous Driving W ARNING Downshifting on Slippery Surfaces : Downshifting into lower gear while driving on slippery surface s is dangerous. The sudden change in tire speed could cause the tires to skid. This could lead to loss of vehicle control and an accide nt.
Black plate (107,1) Winter Driving l Carry emergency gear, including tire chains, window scraper, flares, a small shovel, jumper cables, and a small ba g of sand or salt. Ask an Authorized Mazda Dealer to perform the follow ing precautions: l Have the proper ratio of anti freeze in the radiator .
Black plate (108,1) q Tire Chains Check local regulations before using tire chains. CAUTION l Chains may scrat ch or chip aluminum wheels. Inst all tire chains on steel wheels only . l Chains may affect handling. l Don't go faster than 50 km/h (30 mph) or the chain manufactur er's recommended limit, whi chever is lower .
Black plate (109,1) Driving In Flooded Area W ARNING Driving with W et Brakes: Driving with wet brakes is dangerous. Increased stopping distance or the vehicle pulling to one side when braking could result in a serious accident. Light braking will indicate whether the brakes have been affected.
Black plate (1 10,1) T railer T owing Never tow a trailer with your Mazda. 4-12 Before Driving Y our Mazda T owing Mazda3_8T66-EA-04H_Edition1 Page1 10 Thursday , June 24 2004 5:18 PM Form No.
Black plate (11 1,1) 5 Driving Y our Mazda Explanation of instruments and controls. Starting and Driving ................................................................... .. 5-2 Ignition Switch .......................................... ............
Black plate (1 12,1) Ignition Switch q Ignition Switch Positions LOCK The steering wheel locks to prote ct against theft. Only in this position can the key be removed. Manual transaxle T o turn the key from the ACC to the LOCK position, push the butt on when the key is at the ACC position, then turn the key to the LOCK position .
Black plate (1 13,1) NOTE If turning the key is difficult, jiggle the steering wheel from side to side. ACC (Accessory) The steering wheel unlocks and some electrical accessories will op erate. ON This is the normal runni ng position after the engine is started.
Black plate (1 14,1) CAUTION Don't try the starter for more than 10 seconds at a time. If the engine stalls or fails to start, wait 10 seconds before trying again. Otherwise, you may damage the starter and drain the batt ery . 6. After starting the engine, let it idle for about 10 seconds.
Black plate (1 15,1) W ARNING Driving with W et Brakes: Driving with wet brakes is dangerous. Increased stopping distance or the vehicle pulling to one side when braking could result in a serious accident. Light braking will indicate whether the brakes have been affected.
Black plate (1 16,1) q Brake System W arning Light This warning has the following functions: Parking brake warning The light comes on when the parking brake is applied with the igni tion switch in the ST AR T or ON position. It goes off when the parking brake is full y released.
Black plate (1 17,1) q Anti-Lock Brake System (ABS) í The ABS control unit continuously monitors the speed of each whee l. If one is about to lock up, the ABS respon ds by automatically releasing a nd reapplying that wheel's brake.
Black plate (1 18,1) NOTE When the engine is jum p-started to charge the battery , uneven rpm occurs and the ABS warning light comes on. This is due to a weak battery , not a malfunction.
Black plate (1 19,1) CAUTION l Keep your foot o ff the clutch ped al except when shifting gears. Al so, don't use the clutch to hold the vehicle on an upgrade. Riding the clutch will cau se needless clutch wear and damage. l Make sure the vehicle comes to a complete stop before shifting to R.
Black plate (120,1) Automatic T ransaxle Controls Indicates that you must depress the brake pedal to shift (The ignition switch must be in the ON position). Indicates the shift lev er can be shifted freely into any position. V arious Lockouts: q T ransaxle Ranges The shift lever must be in P or N to operate the starter .
Black plate (121,1) N (Neutral) In N, the wheels and trans axle are not locked. The vehicle will roll freel y even on the slightest incline unles s the parking brake or brakes are on. W ARNING Shifting from N or P: It's dangerous to shift from N or P into a driving gear when the en gine is running faster than idle.
Black plate (122,1) 2. Inser t a screwdriver and push it down . 3. Move the shift lever . 4. T ake the vehicl e to an Authorized Mazda Dealer to have the syst em checked.
Black plate (123,1) Shifting Manually Shifting up (M1 → M2 → M3 → M4) T o shift up to a higher gear, tap the shift lever back ( ) once. NOTE l When driving slow ly , the gears may not shift up depending on vehicle speed. l In manual shift mode, gears do not shift up automatically .
Black plate (124,1) NOTE l When driving at high speeds , the gear may not shif t down depending on vehicle speed. l During deceleration, the gear may automatically shif t down depending on vehicle speed. l When depressing the acceler ator fully , the transaxle will shift to a lower gear , depending on vehicle speed.
Black plate (125,1) NOTE If the vehicle is drive n at a low speed from a standing start while in M2, the gear may not shif t down to M1 automatically .
Black plate (126,1) Power Steering Power steering is only operabl e when the engine is running. If the engine is off or if the power steering system is inoperable, you can still steer, but it requires more physical effort. If the steering feels rigid durin g normal driving, consult an Authoriz ed Mazda Dealer .
Black plate (127,1) Cruise Control í W ith cruise control, you can set and automatically maintain any speed of more than about 30 k m/h (19 mph). W ARNING Cruise Control Use: Using cruise contro l in.
Black plate (128,1) W ARNING Cruise Main Switch: Leaving the ON/OFF switc h on when not using the cruise contro l is dangerous as it may be switched on accidentally. This could result in loss of vehicle control. Keep the ON/OFF switch off when cruis e contro l is not in use.
Black plate (129,1) Y our vehicle has a tap-up feature that allows you to incre ase your current speed in increments of 1.6 km/h (1 mph) by a momentary tap of the RES/ ACCEL button. Multiple taps will incre ase your vehicle speed 1.6 km/ h (1 mph) for each tap.
Black plate (130,1) q T o Resume Cruising Speed at More Than 30 km/h (19 mph) If some other method besid es the ON/ OFF switch was used to cancel cruising speed and the system is still activated, the most recent set speed will automati cally resume when the RES/ACC EL button is pressed.
Black plate (131,1) Tir e Pressur e Monitoring System í The tire pressure monitoring system (TPMS) monitors the pressure for each tire. If tire pressure is too low or too high in one or more tires, the system will inform the driver via the warning light in the instrument panel and by the warning beep sound.
Black plate (132,1) q Tire Pressure Monitoring System W arning Light This warning light illumi nates for a few seconds when the ignition switch is turned to the ON position. Thereafter, the warning light illuminates when tire pressure is too low or too high in one or more tires, and flashes when there is a system mal function.
Black plate (133,1) NOTE A tire pressure sensor is not installed to the temporary spare tire. The war ning light will flash conti nuously while the temporary spare tire is being used. W arning light flashes When the warning light flashes, there may be a system malfunction.
Black plate (134,1) 2. W ait for about 15 minutes . 3. After about 15 minutes, drive the vehicle at a speed of at least 20 km/h (12 mph) for several minutes and the tire pressure sensor ID signal code will be registered automatically .
Black plate (135,1) Meters and Gauges (Black-out meter) When the ignition switch is in the ON position, the dashboard gauges illuminate. Speedometer .................... .................................................. ............................. .
Black plate (136,1) q Speedometer The speedometer indicates the speed of the vehicle. q Odometer , T rip Meter and T rip Meter Selector The display mode can be changed between trip meter A and tri p meter B by pressing the selector while one of them is displayed.
Black plate (137,1) NOTE l (Standard meter) The odometer and trip meter can be displayed as follows even when the ignition switch is in the ACC or LOCK position. l Displays for 10 minutes after the ignition switch is turne d to the ACC or LOCK position from the ON position.
Black plate (138,1) q T achometer The tachometer shows engine speed in thousands of revolutions per minute (rpm). Red zone CAUTION Don't run the engine with the tachometer needle in the RED ZONE .
Black plate (139,1) q Dashboard Illumination When the exterior lights are on, rotate the thumb-wheel to adjus t the brightness of the dashboard lights. Bright Dim NOTE Black-out meter When the instrument clust er dimmer is canceled, the instrume nt cluster illumination intensit y will not change by rotating the thumb-wheel.
Black plate (140,1) W arning/Indicator Lights W arning/Indicator lights will appear in any of the highlighted areas Signal W arning/Indicator Lights Page Brake System W arning Light 5-32 Charging Syst.
Black plate (141,1) Signal W arning/Indicator Lights Page Seat Belt W arning Light/Beep 5-35 Door-Ajar W arning Light 5-36 Low W asher Fluid Level W arning Light 5-36 Automatic Transaxle W arning Ligh.
Black plate (142,1) q Brake System W arning Light This warning has the following functions: Parking brake warning The light comes on when the parking brake is applied with the igni tion switch in the ST AR T or ON position. It goes off when the parking brake is full y released.
Black plate (143,1) q Charging System W arning Light This warning light illuminates when the ignition switch is turned to the ON position and turns off when the engine is started. If the warning light illuminate s while driving, it indicates a malfunct ion of the alternator or of the charging system.
Black plate (144,1) l The fuel-filler cap is missing or not tightened securely . If the check engine ligh t remains on or flashes continuously , do not drive at high speeds and consult an Authorized Mazda Dealer as soon as possible.
Black plate (145,1) A system malfunction is indicated when the warning light illuminates or doesn't illuminate at all when the igni tion switch is turned to the ON po sition. If any of these occur, consult an Authorized Mazda Dealer as soon as possible.
Black plate (146,1) Condition Result The driver's seat belt is not fastened when the vehicle speed reaches 8 km/h (5 mph) and about 1 minute has elapsed since the ignition switch was turned to the ON position. The warning light flashes and the beep sound will be heard for about 6 seconds every 30 seconds, for a period of about 5 minutes.
Black plate (147,1) CAUTION If the automatic transaxle warning light illuminates, the trans axle has an electrical problem. Con tinuing to drive your Mazda in this condit ion could cause damage to your transaxle. Consult an Authorized Mazda Dealer as soon as possible.
Black plate (148,1) Adjust the tire pressure to the co rrect tire pressure at an Authori zed Mazda Dealer or the nearest service station. Refer to the specification charts (page 10-7). CAUTION When replacing/repairing the tires or wheels or both, have the work done by an Authorized Mazda Dealer, or the tire pressure sensor s may be damaged.
Black plate (149,1) q Shift Position Indicator Light (Automatic T ransaxle) This indicates the selected shift position when the ignition switch is in the ON position. Gear position indicator Gear position indicator When the shift lever is in the D or M position, the numeral for the selected gear illuminates.
Black plate (150,1) q Power Steering Malfunction Indicator Light This indicator light illumina tes when the ignition switch is turned to the ON position and goes off when the engine is started. The light illuminates to indi cate that the power steering is inoperable.
Black plate (151,1) Beep Sounds q Air Bag/Front Seat Belt Pretensioner System W arning Beep If a malfunction is detected in the air bag/ front seat belt prete nsioner systems and the warning light, a warning beep sound will be heard for about 5 seconds every minute.
Black plate (152,1) Lighting Control q Headlights T ype A (Without AUTO po sition) T urn the headlight switch to turn the headlights and other exterior lights on or off.
Black plate (153,1) CAUTION l Do not shade the ligh t sensor by adhering a sticker or a label on the windshield. Otherw ise the light sensor will not operat e correctly . Light sensor l The light sensor also works as a rain sensor for the auto-wiper control.
Black plate (154,1) q Headlight High-Low Beam Push the lever forw ard for high beam. Pull it back for low . High beam Low beam q Flashing the Headlights T o flash the headlights, pull the lever fully toward you. The headlight switch need not be on, and the lever will return to the normal position when released.
Black plate (155,1) NOTE The Daytime Running Lights turn off when the parking brake is appli ed. T urn and Lane-Change Signals q T urn Signal Move the signal lever do wn (for a left turn) or up (for a right turn) to the stop position. The signal will self -cancel after the turn is completed.
Black plate (156,1) Fog Lights í The fog lights help you to see as well as to be seen. The headlights must be turned on to turn on the front fog lights.
Black plate (157,1) q Windshield W ipers T ype A (With INT position) 1 2 T urn the wipers on by pulling the lever down. INT ― Intermittent 1 ― Low speed 2 ― High speed T ype B (With AUTO posit ion, CANADA) í T urn the wipers on by pulling the lever down.
Black plate (158,1) CAUTION l Do not shade the rain sensor by adhering a sticker or a label on the windshield. Otherw ise the rain sensor will not operat e correctly .
Black plate (159,1) q Windshield W asher Pull the lever toward you and hold it to spray washer fluid. OFF W asher NOTE W ith the wiper lever in the OFF or INT (T ype A)/AUTO (T ype B) position, the wipers will operate continuously until the lever is released.
Black plate (160,1) Rear Window Defr oster The rear window defros ter clears frost , fog, and thin ice from the rear window . The ignition switch must be in the ON position. Press the switch to turn on the rear window defroster . The rear window defroster operates for about 10 ― 15 minutes and turns off autom atically .
Black plate (161,1) Horn T o sound the horn, press around the mark on the steering whee l. Hazard W arning Flasher The hazard warning ligh ts should always be used when you stop on or near a roadway . The hazard warning ligh ts warn other drivers that your vehicle is a traffic hazard and that they must take extre me caution when near it.
Black plate (162,1) 5-52 Mazda3_8T66-EA-04H_Edition1 Page162 Thursday , June 24 2004 5:18 PM Form No.8T66-EA-04H.
Black plate (163,1) 6 Interior Comfort Use of various features for drive comfort, including air-conditioning and audio system. Climate Control System ............................... ................................ 6-2 Operating Tips .................
Black plate (164,1) Operating Tips q Operating the Climate Control System Operate the climate control system with the engine running. NOTE T o prevent the battery from being discharged, do not leave the fan control dial on for a long period of time when the engine is not running.
Black plate (165,1) V ent Operation Center vents Side vents q Adjusting the V ents Directing airflow Side V ents T o adjust the direction of airflow , open the vents and rotate them left and right. push Center V ents T o adjust the direction of airflow , move the adjustment knob.
Black plate (166,1) q Selecting the Airflow Mode Dashboard and Floor V ents Defroster V ents Floor V ents Dashboard V ents Defr oster and Floor V ents 6-4 Interior Comfort Climate Control System Mazda3_8T66-EA-04H_Edition1 Page166 Thursday , June 24 2004 5:18 PM Form No.
Black plate (167,1) Control Panel Temperature control dial Fan control dial Mode selector dial Air intake selector A/C Switch Rear window defroster switch Some models. q Control Switches T emperature control dial Hot Cold This dial controls tem perature.
Black plate (168,1) Mode selector dial T urn the mode selector dial to select airflow mode (page 6-4). NOTE If you want to slightly adjus t the airflow amount, set the mode selector dial at . A/C switch í Push the switch to turn the air conditioner on.
Black plate (169,1) W ARNING The Recirculated Air Posit ion: Using the position in cold or rainy weather will cause the windows to fog up. Y our vision will be hampered, which could lead to a serious accident. Do not use the position in cold or rainy wea ther .
Black plate (170,1) CAUTION When using the air conditioner whi le driving up long hills or in heavy traffic, closely monitor the tem perature gauge (page 5-28). The air conditioner may cause engine overheating. If the gauge indi cates overheating, turn the air condition er off.
Black plate (171,1) q Dehumidifying (With Air Conditioner) Operate the air condit ioner in cool or cold weather to help defog the windshield and side windows. 1. Set the mode selector dial to the desired position. 2. Set the air intake selector to the position.
Black plate (172,1) Antenna q Detachable T ype T o remove the antenn a, turn it counterclockwise. T o install the antenna, turn it clockw ise. Make sure the antenna is securely installed. Remov e Install CAUTION T o prevent damage to the antenna, remove it before enter ing a car was h facility or passing bene ath a low overhead clearance.
Black plate (173,1) q Radio Reception AM characteristics AM signals bend around such things as buildings or mountain s and bounce off the ionosphere. Therefore, they can reach longer distances than FM signals. Because of this, two stations may sometimes be picked up on the same frequency at the same time.
Black plate (174,1) Flutter/Skip noise Signals from an FM transmi tter move in straight lines and become weak in vall eys between tall buildings, mount ains, and other obstacles. When a vehicle passes through such an area, the recept ion conditions may change suddenly , resulting in annoying noise.
Black plate (175,1) q Operating Tips for Cassette T ape Player Cleaning the cassette tape player The tape head, capstans, and pinch roll ers will gather oxide residue from cassette tapes. This can cause weak or wavering sounds and damage to the cassette tapes and player .
Black plate (176,1) q Operating Tips for Mini Disc (MD) Player The following precautions shoul d be observed. l Do not spill any liqu id on the audio system. l Do not insert any object s, other than MDs, into the slot. l The MD player has been designed to play MDs bearing the ident ification logo as shown.
Black plate (177,1) q Operating Tips for CD Player/In- Dash CD Changer Condensation phenomenon Immediately after turning on the heater when the vehicle is cold, the CD or optical components (prism a nd lens) in the CD player/changer may becom e clouded with condensation.
Black plate (178,1) l When driving over uneven surfaces, the sound may jump. l The CD player/chang er has been designed to play CDs bearing the identification logo as shown. No other discs can be played. l Be sure never to touch the signa l surface when handling the CDs.
Black plate (179,1) Audio Set CD Player In-Dash CD Changer Cassette T ape Player Mini Disc (MD) Player Illustration is of a representativ e audio unit. Audio information is displayed on the information display . Power/V olume/Sound Controls .... .....
Black plate (180,1) q Power/V olume/Sound Controls Audio control dial Power/V olume dial Power ON/OFF T urn the ignition switch to the ACC or ON position. Press the power/volume dial to turn the audio system on. Press the power/volume dial ag ain to turn the audio system off.
Black plate (181,1) * Depending on the mode selec ted, the indication changes. 2. Turn the audio control dial to ad just the selected functions as foll ows: Indication T urn Left T urn Right Select mo.
Black plate (182,1) q Operating the Radio Scan button Band selector buttons Seek tuning buttons Channel preset buttons *For reception of optional SIRIUS digital satellite radio. Used on vehicles equipped with the separately sold SIRIUS digital satellite radio unit.
Black plate (183,1) Seek tuning Pressing the seek tuni ng button ( , ) will cause the tuner to seek a higher or lower frequency automatically . NOTE If you continue to press a nd hold the button, the frequency will continue changing without stopping. Scan tuning Press the scan button ( )t o automatically sample strong stations .
Black plate (184,1) q Operating the Cassette T ape Player í Cassette tape eject button Cassette tape slot Program button Dolby NR button Repeat button Cassette tape play button Fast-forward button Re.
Black plate (185,1) NOTE The cassette tape can be ejected when the ignition switch is in the OFF position. Fast-forward/Rewind Press the fast-forward button ( )t o fast-forward. Press the rewind button ( ) to rew ind. T o stop this operation and play the cassette tape, press the butt on again.
Black plate (186,1) q Operating the Mini Disc (MD) Player í Repeat button MD play button Scan button MD slot MD eject button Random button Fast-forward button Rev erse button T rack up button T rack down button Display button/ Display feed dial Inserting the MD Insert the MD, label -side up with the arrow pointed to the slot.
Black plate (187,1) Press the scan button ( ) during play to start scan play operation (the track number will flash). Press the scan button ( ) once again to cancel scan play . NOTE If the unit is left in scan, normal play will resume where scan was selected.
Black plate (188,1) q Operating the Compact Disc (CD) Player í CD slot CD play button CD eject button Load button Repeat button Scan button Rev erse button Fast-forward b utton Random button T rack up button T rack down button Inserting the CD Insert the CD into the slot, label-side up.
Black plate (189,1) Music scan This feature helps to find a program by playing about the first 10 seconds of each track. Press the scan button ( ) during play to start scan play operation (the track number will flash). Press the scan button ( ) once again to cancel scan play .
Black plate (190,1) q Operating the In-Dash CD Changer í CD slot CD play button CD eject button Load button Repeat button Scan button Rev erse button Fast-forward b utton Random button Display button T rack up button Disc up button Disc down button T rack down button Inserting the CD The CD must be label-side up when inserting.
Black plate (191,1) Multiple insertion 1. Press and hold the load button ( ) for about 2 seconds unti l a beep is heard. 2. W ait 3 seconds or press the load button ( ) again within 3 seconds after the beep is heard. 3. When “ IN ” is displayed, insert the CD.
Black plate (192,1) Fast-forward/Reverse Press and hold the fast-forward button ( ) to advance throu gh a track at high speed. Press and hold the revers e button ( ) to reverse through a track at high speed. T rack search Press the track up button ( ) once to skip forward to the beginning of the next track.
Black plate (193,1) q Error Indications If you see an error indication on the display , find the cause in the cha rt. If you cannot clear the error indication, take the vehicle to an Authorized Mazda Dealer . Indication Cause Solution CHECK MD MD is inserted upside down Insert the MD properly .
Black plate (194,1) Audio Control Switch Operation (Steering Wheel) í NOTE Mazda installed this system to help you avoid being too distracted using audio controls on the dashboard. Alway s make safe driving your first priority . q Adjusting the V olume T o increase the volume, press volume button ( ).
Black plate (195,1) q Seek Switch When listening to the ra dio Press the seek switch ( , ), the radio switches to the next/p revious stored station in the order that it was stored (1 ― 6). Press the seek switch ( , ) for about 2 seconds until a beep is heard to seek a higher or lower frequency autom atically .
Black plate (196,1) Safety Certification This CD player is made and tested to meet exacting safety standards. It meets FCC requirements and complies with safety performance standards of the U.S. Depa rtment of Health and Human Services. CAUTION l This CD player should no t be adjusted or repai red by anyone except qualified service personnel.
Black plate (197,1) Sunvisors When you need a sunvisor, lower it for use in front or swing it to the side. Sun visor q V anity Mirrors T o use the vanity mirror, lower the sunvisor .
Black plate (198,1) q Overhead Lights í Front With moonroof Without moonroof Switch Position Front Overhead Lights Light off l Light on when any door is open l (W ith illuminated entry system) Light .
Black plate (199,1) Without moonroof Switches q Luggage Compartment Light (5 Door) ON OFF Switch Position Overhead Lights Light off Light on when the liftgate is open Interior Comfort Interior Equipment 6-37 Mazda3_8T66-EA-04H_Edition1 Page199 Thursday , June 24 2004 5:19 PM Form No.
Black plate (200,1) Information Display Clock Audio display q Information Display Functions The information display has the following functions: l Clock l Audio Display 6-38 Interior Comfort Interior Equipment Mazda3_8T66-EA-04H_Edition1 Page200 Thursday , June 24 2004 5:19 PM Form No.
Black plate (201,1) q Clock When the ignition switch is in the ACC or ON position, the time is displ ayed. Time setting 1. Press the CLOCK button until a beep sounds, and “ 12Hr ” and “ 24Hr ” will be displayed. 2. Press the SET button to switch betwe en “ 12Hr ” and “ 24Hr ” displays.
Black plate (202,1) Lighter The ignition switch must be in the ACC or ON position. Press the lighter in and relea se it. When ready for use, it automati cally pops out. CAUTION l Don't touch the met al part of the lighter, you may burn yourself. l Don't hold the lighter in because it will overheat.
Black plate (203,1) Cup Holder W ARNING Using Cup Holder: Using a cup holder to hold hot liquids while the vehicle is moving is dangerous. If the contents spill, you could be scalded. Never use a cup holder to hold hot liquids while the vehicle is movin g.
Black plate (204,1) Bottle Holder Bottle holders are on the insi de of the doors. Bottle holder CAUTION Don't use the bottle holders for containers without caps. The contents may spill when the door is opened or closed. Storage Compartments W ARNING Open Storage Boxes: Driving with the storage boxes open is dangerous.
Black plate (205,1) q Center Console T o open, pull the lower release catch. Small items can be placed in the tray of the center console lid. T o open it, pull the upper release catch.
Black plate (206,1) Without flexible floor board T o use the cargo sub-co mpartment, remove or lift the trunk board. T runk board Cargo sub- compartment q Flexible Floor Board (5 Door) í The luggage compartment can be separated vertically and/or horizon tally , using the trunk board and the trunk board loops.
Black plate (207,1) 2. Inser t the trunk board loops into the trunk board slits. Front T runk board NOTE T o facilitate insertion of the trunk board loops into the trunk board slits, first insert the bottom of the rear trunk board into the groove of the luggage sub- compartment.
Black plate (208,1) 3. Inser t the other trunk board loop into slit B until a clic k sound is heard. Slit B 4. Rock the trunk board to make sure the board is installed secure ly . CAUTION Do not place or remo ve luggage via the rear passenger seat area while the vehicle is moving.
Black plate (209,1) 7 In Case of an Emergency Helpful information on what to do in an emergency . Parking in an Em ergency ................................................... ....... ... 7-2 Parking in an Emergency .......................... .........
Black plate (210,1) Parking in an Emergency The hazard warning ligh ts should always be used when you stop on or near a roadway . The hazard warning ligh ts warn other drivers that your vehicle is a traffic hazard and that they must take extre me caution when near it.
Black plate (211,1) Spare T ire and T ool Storage Spare tire and tools are stored in the locat ions illustrated in the diagram. Lug wrench Jack handle T iedown e yelet Jack Spare tire 4 Door 5 Door Ja.
Black plate (212,1) q Jack T o remove the jack 1. Turn the knob and remove the cover. 2. Turn the wing bolt countercloc kwise. T o secure the jack Perform the removal p rocedure in reverse.
Black plate (213,1) NOTE (With Tire Pressure Monitoring System) A tire pressure sensor is not installed to the temporary spare tire. The war ning light will flash conti nuously while the temporary spare tire is being used (page 5-22). T o remove the spare tire (4 Door) 1.
Black plate (214,1) Changing a Flat Tire NOTE If the following occurs while driving, it could indicate a flat tire. l Steering becomes difficult. l The vehicle begins to vibra te excessively .
Black plate (215,1) 6. Block the wheel diagonally opposite the flat tire. When blocking a wheel, place a block both in front and behind the tire. NOTE When blocking a tire, use rocks or wood blocks of sufficient size to hold the tire in place. q Removing a Flat Tire 1.
Black plate (216,1) 3. Place the jack under the jacking position closest to the tir e being changed. Jacking position W ARNING Incorrect Jacking Pos ition: Attempting to jack the vehicl e in positions other than those recommended in this manual is dangerous.
Black plate (217,1) q Locking Lug Nuts í If your vehicle has optional antitheft wheel lug nuts, one on each wheel will lock the tires an d you must use a special key to unlock them. This key is attached to the lug wrench and is stored with the spare tire.
Black plate (218,1) 3. Install the lug nuts with the bevele d edge inward; tighten them by hand . W ARNING Don't Apply Oil or Grease to Lug Nuts, Bolts: Applying oil or grease to lug nuts and bolts is dangerous. The lug nuts could loosen while driving and cau se the tire to come off, resulting in an accident.
Black plate (219,1) W ARNING Metric Studs and Lug Nuts: Because the wheel studs and lug nuts on your Mazda have metric thread s, using a non-metric nut is d angerous. On a metric stud, it would not secure the wheel and would damage the stud, which could cause the whee l to slip off and cause an accident.
Black plate (220,1) Overheating If the temperature gauge indi cates overheating, the vehicle loses powe r , or you hear a loud knocking or pinging noise, the engine is probably too hot. W ARNING Cooling Fan and Engine Inspection: Inspecting the engine with the ignition switch in the ON posit ion is dangerous.
Black plate (221,1) If you find a leak or other damage, or if coolant is still leaki ng: Stop the engine and call an Authorized Mazda Dealer . If you find no problems, the engine is cool, and no leaks are obvious: Carefully add coolant as required (page 8-16).
Black plate (222,1) Starting a Flooded Engine If the engine fails to start, it may be flooded (excessive fuel in the engine). Follow this procedure: 1. Depre ss the accelerator all the way and hold it there. 2. Turn the ignition switch to the ST AR T position and hold it there ― for up to 10 seconds.
Black plate (223,1) Jump-Starting Jump-starting is dangero us if done incorrectly . So foll ow the procedure carefully . If you feel unsure about jump-starting, we strongly recommend that you have a competent service technician do the work.
Black plate (224,1) W ARNING Keep Flames A way: Flames and sparks ne ar open battery cells are dangerous. Hydr ogen gas, produced during normal battery operation, could ignite an d cause the battery to explod e. An exploding battery can cause seri ous burns and injur ies.
Black plate (225,1) Connect cables in numerical order and disconnect in rev erse order. Jumper cables Discharged battery Booster battery 1. For vehicl e equipped wi th the engine cover , remove the engine cover . 2. Remove the battery cover from its front side.
Black plate (226,1) 5. Conne ct the jumper cables in the exact sequence as in the illust ration. l Connect one end of a cable to the positive terminal on the disch arged battery (1). l Attach the other end to the positive terminal on the booster battery (2).
Black plate (227,1) T owing Description W e recom mend that towing be done only by an Authorized Mazda Dealer or a commercial tow-truck service. Proper lifting and towing are necessary to prevent damage to the vehicle. Government and local law s must be followed.
Black plate (228,1) CAUTION Do not use the hooks under the rear bumper for towing and tying down , as they cannot hold the load and it will damage the bumper . Hooks Tiedown Hook CAUTION Don't use the tied own hook under the rear for towing. It is designed ONL Y for tyin g down the vehicle when it's being transport ed.
Black plate (229,1) CAUTION The cap cannot be completel y removed. Do not use excessive force as it may damage the cap or scratch the painted bumper surface. 3. Securel y install the tiedown eyelet using the lug wrench. 4. Hook the tying rope to the tiedown eyelet.
Black plate (230,1) Recreational T owing An example of “ recreational towing ” is towing your vehicle behind a moto rhome. The transaxle is not designed for towing this vehicle on all 4 wheels.
Black plate (231,1) 8 Maintenance and Care How to keep your Mazda in top condition. Introduction ................................................................. ................. 8-2 Introduction ............................................. .......
Black plate (232,1) Introduction Be extremely careful and prevent injury to you rself and others or damag e to your vehicle when using this manual for inspe ction and maintenan ce.
Black plate (233,1) Scheduled Maintenance (North America) Follow Schedule 1 if the vehicl e is operated mainly where none of the follow ing conditions apply . If any do apply , follow Schedule 2 (Cana da and Puerto Rico resi dents follow Schedu le 2).
Black plate (234,1) q Schedule 1 Maintenance Interval Number of months or kilometers (miles), whichever comes first Months 6 12 18 24 30 36 42 48 ×1000 km 12 24 36 48 60 72 84 96 ×1000 miles 7.
Black plate (235,1) q Schedule 2 Maintenance Interval Number of months or kilometers (miles), whichever comes first Months 4 8 12 16 20 24 28 32 36 40 44 48 ×1000 km 8 16 24 32 40 48 56 64 72 80 88 9.
Black plate (236,1) Maintenance Interval Number of months or kilometers (miles), whichever comes first Months 4 8 12 16 20 24 28 32 36 40 44 48 ×1000 km 8 16 24 32 40 48 56 64 72 80 88 96 ×1000 mile.
Black plate (237,1) Scheduled Maintenance (Except North America) NOTE l After the prescribed perio d, continue to follow the described maintenance at the recommended intervals. l As the result of visual examination or functional meas urement of a system's operation (performance), correct , clean, or repla ce as required.
Black plate (238,1) q Schedule Maintenance Interval Number of months or kilometers (miles), whichever comes first Months 6 12 18 24 30 36 42 48 54 60 66 72 78 84 90 96 ×1000 km 10 20 30 40 50 60 70 80 90 100 1 10 120 130 140 150 160 ×1000 miles 6.25 12.
Black plate (239,1) Maintenance Interval Number of months or kilometers (miles), whichever comes first Months 6 12 18 24 30 36 42 48 54 60 66 72 78 84 90 96 ×1000 km 10 20 30 40 50 60 70 80 90 100 1 10 120 130 140 150 160 ×1000 miles 6.25 12.5 18.75 25 31.
Black plate (240,1) Owner Maintenance Schedule The owner or a qualified service techni cian should make these vehicl e inspections at the indicated intervals to ensure safe and dependable operat ion. Bring any problem to the attention of an Authorized Mazda Dealer or qualified service technician as soon as possible.
Black plate (241,1) Owner Maintenance Precautions Improper or incom plete service may resul t in problems. This section gives instructions only for items that are easy to perfor m. As explained in the Intr oduction (page 8-2), several procedures can be done only by a qualified servic e technician with special tools.
Black plate (242,1) Engine Compartment Overview Engine oil dipstick Fuse block Air filter Battery Brake/Clutch fluid reservoir Engine oil-filler cap Engine coolant reservoir W indshield washer fluid r.
Black plate (243,1) Engine Oil q Recommended Oil Use SAE 5W-20 engine oil. Oil container label s provide imp ortant information. A chief contribution this type of oil makes to fuel economy is reducing the amount of fuel necessary to overcom e engine friction.
Black plate (244,1) The quality designatio n SL, or ILSAC must be on the label. 5W-20 120 100 80 60 40 20 0 –20 50 40 30 20 10 0 –10 –20 –30 q Inspecting Engine Oil Level 1. Be sure the vehicle is on a level surface. 2. W arm up the engine to normal operating temperature.
Black plate (245,1) Changing engine oil W ARNING Checking or Changing Engine Oil: Hot engine oil is dange rous. If the engine has been running, the engine oil becomes very hot. Y ou could be seriously burned. Don' t check or change the engine oil when the engine is hot.
Black plate (246,1) Engine Coolant q Inspecting Coolant Level W ARNING Hot Engine: A hot engine is dangerous. If the engine has been running, parts of the engine compartment can becom e very hot. Y ou could be burned. Carefully inspect the engine coolant in the coolant reservoir , but do not open it.
Black plate (247,1) q Changing Coolant Change coolant accordi ng to Scheduled Maintenance (page 8-3). CAUTION l Use only soft (dem ineralized) wat er in the coolant mix ture. W ater that contains minerals will cut down on the coolant's effectiveness.
Black plate (248,1) 4. Drain the system completely . Insert and tighten the plug. Add as much ethylene-glycol-based coolan t mixture and water as necess ary to provide freezing and corrosion prote ction. 5. In extremel y cold climates, add the mixture percentage recommend ed in the coolant mixture percent age table.
Black plate (249,1) q Adding Brake/Clutch Fluid W ARNING Spilled Brake Fluid: Spilled brake flui d is dangerous. If it gets in your eyes, they could be seriously injured. If this happens, immediately flush your eyes with water and get medical attention.
Black plate (250,1) Automatic T ransaxle Fluid (A TF) q Inspecting Automatic T ransaxle Fluid Level The automatic transaxle flui d level should be inspected regularly . Measure it as described below . The volume of fluid changes with the temperature. Fluid must be checked at idle without driving at normal operating temperature.
Black plate (251,1) CAUTION l Use the cold scale only as a reference. l If outside temperatu re is lower than about 20°C (70°F), start the engine and inspect the flui d level after the engine reaches operat ing temperature.
Black plate (252,1) Inspect fluid level in the was her fluid reservoir; add fluid if necessary . T o inspect the washer fluid level in the front reservoir, pull off the cap. Then, holding your thum b over the hole in the center of the cap, lift it stra ight up.
Black plate (253,1) Air Filter CAUTION Don't drive without an air filter . This could result in excess ive engine wear . This air filter may be cleane d with compressed air and reused , or replaced, depending on its condition. Unl ess it is very dirty , simply shake it to remo ve foreign particles.
Black plate (254,1) 5. Wipe inside the air cleaner housi ng with a damp cloth. 6. Clean or replace the filter . 7. Install in the reverse order of remo val.
Black plate (255,1) q Replacing Windshield Wiper Blades When the wipers no longer clean well, the blades are probably worn or cracked. Replace them. CAUTION T o prevent damage to the wiper arms and other components , don't move the wipers by hand.
Black plate (256,1) CAUTION l Don't bend or discard the stiffeners. Y ou need to use them a gain. l If the metal stiffeners are switched, the blade's wiping efficiency could be reduced. So don't use the drive r's side metal stiffeners on the passen ger's side, or vice versa.
Black plate (257,1) 3. Remove the metal stiffeners from the blade rubber and install them in new blades. CAUTION Don't bend or discard the stiffeners. Y ou need to use them a gain. 4. Careful ly insert the new blade rubber . Then install the blade assem bly in the reverse order of removal.
Black plate (258,1) Battery W ARNING Battery-Related Lead Material s: Battery posts, terminals and related accessories contain lead and lead compo unds, chemicals known to the State of California to cause cancer and reproductiv e harm. W ash hands after handling.
Black plate (259,1) W ARNING Keep Flames A way: Flames and sparks ne ar open battery cells are dangerous. Hydr ogen gas, produced during normal battery operation, could ignite an d cause the battery to explod e. An exploding battery can cause seri ous burns and injur ies.
Black plate (260,1) l Rinse off spilled electroly te immediately with a solution of water and baking soda. l If the vehicle will not be used for an extended time, disconnect the battery cables. q Inspecting Electrolyte Level A low level of electroly te fluid will cause the battery to discharge quickl y .
Black plate (261,1) q Tire Inflation Pr essure W ARNING Incorrect Tire Inflation: Overinflation or und erinflation of tir es is dangerous. Adverse handli ng or unexpected tire failure could result in a serious accident. Always inflate the tires to the correct pressure (page 10-7).
Black plate (262,1) Also, inspect them for un even wear and damage. Abnormal wear is usually caused by one or a combination of the following: l Incorrect tire pressure l Improper wheel alignment l Out-of-balance wheel l Severe braking After rotation, inflate all tire press ures to specification (page 10-7) and inspe ct the lug nuts for tightness.
Black plate (263,1) Y ou should replace it before the band is across the entire tread. q T emporary Spare Tire Inspect the temporary spare tire at least monthly to make sure it's properly inflated and stored. The temporary spare tir e is easier to handle because of its constructi on.
Black plate (264,1) NOTE Be sure to install the tire pressure sensors whenever tires or whee ls are replaced. Refer to Tires and Wheels on page 5-23. When replacing a wheel, make sure the new one is the same as the original factory wheel in diameter, rim width, and offset.
Black plate (265,1) Light Bulbs Side turn signal lights Front turn signal lights/ Side-marker lights Rear turn signal lights License plate light Overhead light/Map lights (Front) Headlights (Low beam).
Black plate (266,1) Y our Mazda's headlights and fog lights have replaceable halogen bulbs. W ARNING Xenon Fusion Bulb Replacement: Replacing the xenon fusio n bulbs by yourself is dangerous . Because the xenon fusion bulbs requir e high voltage, you could receive an elect ric shock if the bulbs are handled incorrectly.
Black plate (267,1) High-beam bulb 1. Turn the socket and bulb assembly counterclockwise and remove it. Carefully remove the headlight bulb from its socket in the refl ector by gently pulling it straight backward out of the socket.
Black plate (268,1) NOTE l T o replace the bulb, contact an Authorized Mazda Dealer . l Use the protective cover and carto n for the replacement bulb to dispo se of the old bulb promptly and out of the reach of children. l When reinstalling the sealing cover, make sure faces up.
Black plate (269,1) 2. Detach the electrical connect or from the unit by pulling it to the rear . 3. Install the new side turn signa l unit in the reverse order of removal. NOTE Bulb replacement is not possible because it is built into the unit. Replace the unit.
Black plate (270,1) Brake lights/T aillight s, Rear turn signal lights (5 Door) 1. Remove the cover. Left side Right side 2. Turn the socket and bulb assembly counterclockwise and remove it. 3. Disconne ct the bulb from the socket . Brake lights/T aillights Rear turn signal lights 4.
Black plate (271,1) 4. Install the new bulb in the revers e order of removal. NOTE T o replace the bulb, contact an Authorized Mazda Dealer . 5 Door 1. Remove the cover. 2. Turn the socket and bulb assembly counterclockwise and remove it. 3. Disconne ct the bulb from the socket .
Black plate (272,1) 5 Door 1. Remove the liftgate up per trim. 2. Disconne ct the electrica l connector from the socket. 3. Turn the socket and bulb assembly counterclockwise and remove it. 4. Disconne ct the bulb from the socket . 5. Install the new bulb in the revers e order of removal.
Black plate (273,1) 2. Turn the socket and bulb assembly counterclockwise and remove it. 3. Disconne ct the bulb from the socket . 4. Install the new bulb in the revers e order of removal.
Black plate (274,1) 3. Disconne ct the bulb by pull ing it out. 4. Install the new bulb in the revers e order of removal. Fuses Y our vehicle's elect rical system is protected by fuses. If any lights, accessories , or controls don't work, inspect the appropr iate circuit protector .
Black plate (275,1) 3. Turn the knobs countercloc kwise and lower the fuse block. 4. Locate the position of the suspec ted fuse by using the chart inside the fuse block cover . 5. Pull the fuse straight out wi th the fuse puller provided on the inside of the engine compartment fuse block cover .
Black plate (276,1) 2. Remove the fuse block cover . 3. If a fuse is blown, replace it with a new one of the same amperage rating . Normal Blown NOTE T o replace the MAIN fuse, contact an Authorized Mazda Dealer . 8-46 Maintenance and Care Owner Maintenance Mazda3_8T66-EA-04H_Edition1 Page276 Thursday , June 24 2004 5:20 PM Form No.
Black plate (277,1) q Fuse Panel Description Fuse block (Engine compartment) 1 2 3 4 5 6 78 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 DESCRIP- TION FUSE RA T -.
Black plate (278,1) DESCRIP- TION FUSE RA T - ING PROTECTED COMPONENT 29 ―― ― 30 ENG +B 10A PCM 31 ROOM 15A Interior lights 32 ENG BAR 4 10A O2 heater 33 ENG BAR 3 10A O2 heater 34 EGI INJ 10A I.
Black plate (279,1) Fuse block (Passenger's side) 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 8.
Black plate (280,1) DESCRIP- TION FUSE RA T - ING PROTECTED COMPONENT 59 ―― ― 60 HEAD LOW R 15A Headlight low beams (RH), Headlight leveling í 61 HEAD LOW L 15A Headlight low beams (LH) 62 ―.
Black plate (281,1) How to Minimize Environmental Paint Damage The paintwork on your Mazda repres ents the latest technical developments in composition and methods of applicati on. Environmental hazards, howe ver, can harm the paint's protectiv e properties, if proper care is not taken.
Black plate (282,1) q W ater Marks Occurrence Rain, fog, dew , and even tap wat er can contain harmful minerals such as salt and lime. If moisture containing these minerals settles on the vehicl e and evaporates, the minerals will concentrate and harden to form white rings.
Black plate (283,1) Exterior Care Follow all label and container direc tions when using a chemical cleane r or polish. Read all warnings and cautions. q Maintaining the Finish W ashing CAUTION When th.
Black plate (284,1) CAUTION l Don't use steel wool, abrasive cleaners, or strong detergents containing highly alkal ine or caustic agents on chrome-plated or anodiz ed aluminum parts. This may damage the protective coati ng; also, cleaners and detergents may discolor or deteriorate the paint.
Black plate (285,1) q Repairing Damage to the Finish Deep scratches or chips on the finish should be repaired promptly . Exp osed metal quickly rusts and can lead to major repairs.
Black plate (286,1) q Aluminum Wheel Maintenance A protective coating is provi ded over the aluminum wheels. Special care is needed to protect this coating. NOTE l Don't use a wire brush or any abrasive cleaner, polishing compound, or solvent on aluminum wheels.
Black plate (287,1) T o keep the fabri c looking clean and fresh, take care of it. Ot herwise its color will be affected, it can be stained easily , and its fire-resistan ce may be reduced. CAUTION Use only recommended cleane rs and procedures. Others may affect appearance and fire-resist ance.
Black plate (288,1) 8-58 Mazda3_8T66-EA-04H_Edition1 Page288 Thursday , June 24 2004 5:20 PM Form No.8T66-EA-04H.
Black plate (289,1) 9 Customer Information and Reporting Safety Defects Important consumer information including warranties and add-on equipment. Customer Assistance .............................. ....................................... 9-2 Customer Assistance (U.
Black plate (290,1) Customer Assistance (U.S.A.) Y our complete and permanent satisfaction is our busin ess. W e are here to serve you. All Authorized Mazda Dealers have the knowledge and the tools to keep your Mazda vehicle in top condition.
Black plate (291,1) By letter at: Attn: Customer Assistance Mazda North American Operati ons 7755 Irvine Center Dri ve Irvine, CA 92618-2922 P.O. Box 19734 Irvine, CA 92623-9734 In order to serve you efficiently and effectively , please help us by providing the following information: 1.
Black plate (292,1) Customer Assistance (Canada) q Satisfaction Review Process Y our complete and perm anent satisfaction is of prima ry concern to Mazda. All Authorized Mazda Dealers have both the knowledge and tools to keep your Mazda in top condition.
Black plate (293,1) Please recognize that the resolution of servi ce problems in most cases requires the use of your Mazda dealer's service facilit ies, personnel and equipment. W e urge you to follow the above three steps in sequenc e for most effective results.
Black plate (294,1) CAMV AP is fully implemented in all provi nces and territories. Consumers wishing to obtai n further information about the Program should contact the Provincial Administrator at 1 .
Black plate (295,1) Customer Assistance (Puerto Rico) Y our complete and permanent sati sfaction is our busin ess. That is why all Authori zed Mazda Dealers have the knowledge and the tools to keep your Mazda vehicle in top condition.
Black plate (296,1) Importer/Distributor q U.S.A. Mazda North American Operat ions 7755 Irvine Center Dri ve Irvine, CA 92618-2922 U.S.A. P.O. Box 19734 Irvine, CA 92623-9734 U.S.A. TEL:1 (800) 222-5500 (in U.S.A.) (949) 727-1990 (outside U.S.A.) Distributor in Each Area q CANADA Mazda Canada Inc.
Black plate (297,1) W arranties for Y our Mazda l New V ehicl e Limited W arranty l Distributor Majo r Component Limited W arranty (Canada only) l Safety Restraint System Limi ted W arranty l Anti-perforation Limited W arrant y l Federal Emission Control W arranty (U.
Black plate (298,1) Outside the United States Government regulations in the United States require that autom obiles meet specific emission regulations and safety stand ards. Therefore, vehicles built for use in the United States may differ from those sold in other countr ies.
Black plate (299,1) Outside Canada Government regulations in Canada require that automobiles meet speci fic emission regulations and safety regulations.
Black plate (300,1) Registering Y our V ehicle in A Foreign Country (Except United States and Canada) Government regulations in your country could require that automobiles meet specific emission and safety standards. V ehicles b uilt for your countr y may differ from those built for other countr ies.
Black plate (301,1) Add-On Non-Genuine Parts and Accessories Non-genuine parts and access ories for Mazda vehicles can be found in stor es. These may fit your vehicl e, but they are not app roved by Mazda for use with Mazda vehicles.
Black plate (302,1) Cell Phones W arning W ARNING Use of Cell Phone s and Other Devices by Driver: Use of any electrical devices such as cell phones, computers, portable radio s, vehicle navigation or other devices by the driver while the vehicle is moving is dangerous.
Black plate (303,1) T ype Approval of Equipment Immobilizer system Customer Information and Reporting Safety Defects T ype Approval of Equipment 9-15 Mazda3_8T66-EA-04H_Edition1 Page303 Thursday , June 24 2004 5:20 PM Form No.
Black plate (304,1) Uniform Tire Quality Grading System (UTQGS) This information relates to the tire grading system developed by the U.S. Nationa l Highway Traff ic Safety Administration for grading tires by tread wear , traction, and temperature performance.
Black plate (305,1) W ARNING The temperature grade for this tir e is established for a tire that is properly inflated and not overloaded. Exc essive speed, und erinflation, or e xcessive loading, either separately or in combinati on, can cause he at buildup and possi ble tire failure.
Black plate (306,1) Reporting Safety Defects If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway T raffic Safety Admi nistration (NHTSA) in addition to notifying Mazda Motor Corporation (Y our Mazda Importer/Distribut or).
Black plate (307,1) Service Publications Factory-authorized Mazda service publications are available for owners who wish to do some of their own mai ntenance and repai r . When requesting any of our publications through an Authorized Mazda Dealer, refer to the chart below .
Black plate (308,1) 9-20 Mazda3_8T66-EA-04H_Edition1 Page308 Thursday , June 24 2004 5:20 PM Form No.8T66-EA-04H.
Black plate (309,1) 10 Specifications T echnical information about your Mazda. Identification Numbers ............... ................................................ 10-2 V ehicle Informat ion Labels ..................................................
Black plate (310,1) V ehicle Information Labels q V ehicle Identification Number The vehicle identification numbe r legally identifies your vehicle. The numbe r is on a plate attached the cowl panel located on the left corner of the dashboard. This plate can easily be seen throu gh the windshield.
Black plate (311,1) q Engine Number Forward Identification Numbers 10-3 Mazda3_8T66-EA-04H_Edition1 Page31 1 Thursday , June 24 2004 5:20 PM Form No.8T66-EA-04H.
Black plate (312,1) Specifications q Engine Item Model 2.0-liter engine 2.3-liter engine T ype DOHC-16V in-line, 4-cylinder Bore×Stroke 87.5 × 83.1 mm (3.44 × 3.27 in) 87.5 × 94.0 mm (3.44 × 3.70 in) Displacement 1,999 ml (1,999 cc, 121.9 cu in) 2,261 ml (2,261 cc, 137.
Black plate (313,1) q Capacities (Approximate Quantities) Item Unit L US qt Imp qt Engine oil W ith oil filter replacement 4.3 4.5 3.8 W ithout oil filter replacement 3.9 4.1 3.4 Coolant W ith heater 7.5 7.9 6.6 W ithout heater 6.9 7.3 6.1 Manual transaxle oil 2.
Black plate (314,1) 2.3-liter engine Item W eight Manual transaxle Automatic transaxle GVWR (Gross V ehicle W eight Rating) 1,732 kg (3,818 lb) 1,760 kg (3,880 lb) GA WR (Gross Axle W eight Rating) Fr.
Black plate (315,1) Interior light Light bulb Category W attage ECE R Trunk light (Sedan) 5 W5W Luggage compartment light (Hatchback) ― Overhead light/Map lights (Front) í W5W Overhead light (Rear) 10 ― q Tires NOTE The tires have been optimally matched with the chassi s of your vehicle.
Black plate (316,1) 10-8 Mazda3_8T66-EA-04H_Edition1 Page316 Thursday , June 24 2004 5:20 PM Form No.8T66-EA-04H.
Black plate (317,1) 11 Index 1 1-1 Mazda3_8T66-EA-04H_Edition1 Page317 Thursday , June 24 2004 5:20 PM Form No.8T66-EA-04H.
Black plate (318,1) A Add-On Non-Genuine Parts and Accessories ....................................... 9-13 Air Bag Systems ............................... 2-36 Air Filter ......................................... ... 8-23 Antenna ....................
Black plate (319,1) D Dashboard Illuminatio n ............... ..... 5-29 Daytime Running Lights ................... 5-44 Defroster Rear window ........................... ... 5-50 Dimensions ............ ........................... 10-5 Door Locks ...
Black plate (320,1) I Ignition Keys ................................ ............. 3-2 Switch ............................. ............. 5-2 Illuminated Entry Sy stem ................. 6-35 Immobilizer System .......................... 3-23 Indicator Lights .
Black plate (321,1) P Parking Brake ......... ............................ 5-5 Parking in an Emergency ................. ... 7-2 Power Door Locks .. ............................ 3-8 Power Steering .................................. 5-16 Fluid ........
Black plate (322,1) T T ires Inflation pressure ........................ 8-31 Replacement ................... ............ 8-32 Rotation .......................... ............ 8-31 Snow tires ....................... ............. 4-9 Spare tire and tool storage .
Ein wichtiger Punkt beim Kauf des Geräts Mazda 2005 3 4-DOOR (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Mazda 2005 3 4-DOOR noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Mazda 2005 3 4-DOOR - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Mazda 2005 3 4-DOOR reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Mazda 2005 3 4-DOOR erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Mazda 2005 3 4-DOOR besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Mazda 2005 3 4-DOOR verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Mazda 2005 3 4-DOOR. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Mazda 2005 3 4-DOOR gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.