Benutzeranleitung / Produktwartung 80-160GB des Produzenten Maxtor
Zur Seite of 64
DiamondMax 17 80-160GB ATA May 29, 2006 PN: 1938.
Revisions PN: 1938 © May 29, 2006 Maxtor Corporation. All rights r eserved. Printed in U.S.A. This publication could include t echnical inaccuracies or typogr aphical error s. Changes are periodic ally made to the information her ein – which will be incorporat ed in revised editions of the public ation.
Befor e Y ou Begin Thank you f or your inter est in Maxtor DiamondMax 17 80-160GB A T hard disk driv es. This manual pro vides technical information f or OEM engineers and systems int egrators r egar ding the installation and use of Maxtor A T A hard drives.
Table Of Contents i Maxtor DiamondMax 17 80-160GB AT Hard Disk Drive Chapter 1 INTRODUCTION 1.1 AUDIENCE ......................................................................................................................................... 1-1 1.2 MANUAL ORGANIZATION .
Table Of Contents Maxtor DiamondMax 17 80-160GB AT Hard Disk Drive ii Chapter 4 PRODUCT SPECIFICATIONS 4.1 Model Number and Capacity ............................................................................................................ 4-1 4.2 Drive Configuration .
List of Figures iii Maxtor DiamondMax 17 80-160GB AT Hard Disk Drive Figure 3-1 Mechanical Dimensions ......................................................................................................... 3-1 Figure 3-2 20-Pack Shipping Container .
viii Maxtor DiamondMax 17 80-160GB AT Hard Disk Drive List of Tables Table 3-1 AT Jumper Options .................................................................................................... ........ 3-5 Table 3-2 LBA Addressing ...............
Maxtor DiamondMax 17 80-160GB AT Hard Drive 1-1 Chapter 1 Introduction This chapter gives an overview of the contents of this manual, including the intended audience, how the manual is organized, terminology, conventions, and references. 1.1 AUDIENCE The DiamondMax 17 80-160GB AT hard disk drive product manual is intended for several audiences.
1-2 Maxtor DiamondMax 17 80-160GB AT Hard Drive Introduction 1.3 TERMINOLOGY AND CONVENTIONS In the Glossary at the back of this manual, you can find definitions for many of the terms used in this manual.
Maxtor DiamondMax 17 80-160GB AT Hard Drive 1-3 Introduction The typographical and naming conventions used in this manual are listed below. Conventions that are unique to a specific table appear in the notes that follow that table. Typographical Conventions – Names of Bits: Bit names are presented in initial capitals.
1-4 Maxtor DiamondMax 17 80-160GB AT Hard Drive Introduction.
Maxtor DiamondMax 17 80-160GB AT Hard Disk Drive 2-1 Chapter 2 General Description This chapter summarizes the general functions and key features of the DiamondMax 17 80-160GB AT hard disk drive, as well as the applicable standards and regulations. 2.
2-2 Maxtor DiamondMax 17 80-160GB AT Hard Disk Drive General Description 2.1 KEY FEATURES The DiamondMax 17 AT hard disk drive includes the following key features: General – Low profile, 1-inch heig.
Maxtor DiamondMax 17 80-160GB AT Hard Disk Drive 2-3 General Description Reliability – 550k hours mean time expected until failure (MTTF) –A utomatic retry on read errors – 320-bit, non-interlea.
2-4 Maxtor DiamondMax 17 80-160GB AT Hard Disk Drive General Description 2.1 HARDWARE REQUIREMENTS The DiamondMax 17 AT hard disk drive is compatible with the IBM PC AT, and other computers that are compatible with the IBM PC AT.
Maxtor DiamondMax 17 80-160GB AT Hard Disk Drive 3-1 Chapter 3 Installation This chapter explains how to unpack, configure, mount, and connect the Maxtor DiamondMax 17 80-160GB AT hard disk drive prior to operation. It also explains how to start up, format, and operate the drive.
Installation 3-2 Maxtor DiamondMax 17 80-160GB AT Hard Disk Drive 3.2 UNPACKING INSTRUCTIONS 1. Grounded wrist straps should be worn when opening the ESD bag. 2. Three layer runners should be installed on every table and bench where the product is processed while still vulnerable to ESD.
Installation Maxtor DiamondMax 17 80-160GB AT Hard Disk Drive 3-3 Figure 3-2 shows the shipping container for a 20 pack of DiamondMax 17 80-160GB AT hard disk drives.
Installation 3-4 Maxtor DiamondMax 17 80-160GB AT Hard Disk Drive 3.3 HARDWARE OPTIONS 3.3.1 ATA Interface Connector Figure 3-3 Jumper Locations on the ATA Interface Connector The configuration of a DiamondMax 17 80-160GB AT hard disk drive depends on the host system in which it is to be installed.
Installation Maxtor DiamondMax 17 80-160GB AT Hard Disk Drive 3-5 The configuration of the following three jumpers controls the drive’s five modes of operation: –C S – Cable Select –D S – Drive Select –C LJ– Cylinder Limitation Jumper The AT PCB has two jumper locations provided to configure the drive in a system.
Installation 3-6 Maxtor DiamondMax 17 80-160GB AT Hard Disk Drive 3.3.1.1 Cable Select (CS) Jumper When a DiamondMax 17 80-160GB AT hard disk drive and another ATA hard disk drive are daisy-chained together, they can be configured as Master or Slave either by the CS or DS jumpers.
Installation Maxtor DiamondMax 17 80-160GB AT Hard Disk Drive 3-7 3.3.1.4 Cylinder Limitation Jumper (CLJ) For user capacities below 66,055,248 sectors (32GB), inserting the CLJ jumper limits the Number of Cylinders field 1 to a value of 16,383, as reported in IDENTIFY DEVICE data word.
Installation 3-8 Maxtor DiamondMax 17 80-160GB AT Hard Disk Drive 3.3.2.1 40-Pin ATA Bus Connector Most PC motherboards have a built-in 40-pin ATA bus connector that is compatible with the 40-pin ATA interface of the DiamondMax 17 80-160GB AT hard disk drives.
Installation Maxtor DiamondMax 17 80-160GB AT Hard Disk Drive 3-9 3.4 ATA BUS INTERFACE CONNECTOR (J1, SECTION C) J1 is a three-in-one combination connector. The drive’s DC power can be applied to section A. The ATA bus interface (40-pin) uses section C.
Installation 3-10 Maxtor DiamondMax 17 80-160GB AT Hard Disk Drive 3.4.2 External Drive Activity LED An external drive activity LED may be connected to the DASP-I/O pin 39 on J1.
Installation Maxtor DiamondMax 17 80-160GB AT Hard Disk Drive 3-11 3.5 MOUNTING 3.5.1 Orientation The mounting holes on the DiamondMax 17 80-160GB AT hard disk drives allow the drive to be mounted in any orientation. Figure 3-4 and Figure 3-6 show the location of the three mounting holes on each side of the drive.
Installation 3-12 Maxtor DiamondMax 17 80-160GB AT Hard Disk Drive Figure 3-7 Mounting Screw Clearance CAUTION: The PCB is very close to the mounting holes.
Installation Maxtor DiamondMax 17 80-160GB AT Hard Disk Drive 3-13 3.5.2 Clearance Clearance from the drive to any other surface (except mounting surfaces) must be a minimum of 1.
Installation 3-14 Maxtor DiamondMax 17 80-160GB AT Hard Disk Drive Figure 3-9 Crosswise Airflow Cooling 3.6 FOR SYSTEMS WITH AN ATA ADAPTER BOARD To install the DiamondMax 17 80-160GB AT hard disk drive in an AT-compatible system without a 40-pin ATA bus connector on its motherboard, you need a third- party IDE-compatible adapter board.
Installation Maxtor DiamondMax 17 80-160GB AT Hard Disk Drive 3-15 3.6.1.1 Connecting the Adapter Board and the Drive Use a 40-pin cable to connect the drive to the board. See figure 3-10. To connect the drive to the board: 1. Insert the 40-pin cable connector into the mating connector of the adapter board.
Installation 3-16 Maxtor DiamondMax 17 80-160GB AT Hard Disk Drive 3.7 TECHNIQUES IN DRIVE CONFIGURATION 3.7.1 The 8.4-Gigabytes Barrier Newer BIOS’s allow users to configure disk drives to go beyond the 528MB barrier by using several BIOS translation schemes.
Installation Maxtor DiamondMax 17 80-160GB AT Hard Disk Drive 3-17 3.8 SYSTEM STARTUP AND OPERATION Once you have installed the DiamondMax 17 80-160GB AT hard disk drive, and adapter board (if required) in the host system, you are ready to partition and format the drive for operation.
Maxtor DiamondMax 17 80-160GB AT Hard Disk Drive 4-1 Chapter 4 Product Specifications 4.1 MODEL NUMBER AND CAPACITY 4.2 DRIVE CONFIGURATION Model 6G080L0 6G160P0 F ormatted Capacity (GB LBA Mode) 80GB 160GB GB means 1 billion bytes. T otal acc essibl e capacity varies depending on operating envir onment.
4-2 Maxtor DiamondMax 17 80-160GB AT Hard Disk Drive Product Specifications 4.3 PERFORMANCE SPECIFICATIONS 4.4 PHYSICAL DIMENSIONS Model 6G080L0 6G160P0 Seek Times (typical r ead, ms) Tr ack-to-T rack 2.5 T ypical Seek < 12 < 8.9 F ull Strok e (normal seek) 23 Av erage Latency (ms) 4.
Maxtor DiamondMax 17 80-160GB AT Hard Disk Drive 4-3 Product Specifications 4.5 POWER REQUIREMENTS – 80GB & 160GB 4.5.1 Voltage Tolerance Mode Pow er (W atts) Curr ent 12V (mA) Curr ent 5V (mA) Start-up (peak) ov er 1 ms 23 1580 775 Seek (peak) over 1 ms* 19.
4-4 Maxtor DiamondMax 17 80-160GB AT Hard Disk Drive Product Specifications 4.6 POWER MODE DEFINITIONS Start-up The drive is spinning up following initial application of power and has not yet reached full speed. Seek A random access operation by the drive.
Maxtor DiamondMax 17 80-160GB AT Hard Disk Drive 4-5 Product Specifications 4.8 ENVIRONMENTAL LIMITS Notes: 1. Margin demonstrated implies the product will operate at the stated conditions with an acceptable impact to the ARR specification for any OEM requiring those values in their purchase specification.
4-6 Maxtor DiamondMax 17 80-160GB AT Hard Disk Drive Product Specifications 4.9 SHOCK AND VIBRATION 4.10 RELIABILITY SPECIFICATIONS Annualized Return Rate < 1% Annualized Return Rate (ARR) indicates the average against products shipped.
Maxtor DiamondMax 17 80-160GB AT Hard Disk Drive 4-7 Product Specifications 4.11 EMC/EMI 4.11.1 Radiated Electromagnetic Field Emissions - EMC Compliance The hard disk drive mechanism is designed as a.
4-8 Maxtor DiamondMax 17 80-160GB AT Hard Disk Drive Product Specifications.
Maxtor DiamondMax 17 80-160GB AT Hard Disk Drive 5-1 Chapter 5 ATA Bus Interface and ATA Commands This chapter describes the interface between the DiamondMax 17 80-160GB AT hard disk drive and the ATA bus.
5-2 Maxtor DiamondMax 17 80-160GB AT Hard Disk Drive ATA Bus Interface and ATA Commands 5.4 REGISTER ADDRESS DECODING The Maxtor DiamondMax 17 80-160GB AT hard disk drive allow their host systems to address the full set of command and control registers as specified in clause 5 of the ATA/ATAPI-7 standard.
Maxtor DiamondMax 17 80-160GB AT Hard Disk Drive 5-3 ATA Bus Interface and ATA Commands READ FPDMA QUEUED 60h READ L OG EXTENSION 2fh READ MUL TIPLE C4h READ MUL TIPLE EXTENSION 29h READ NA TIVE MAX A.
5-4 Maxtor DiamondMax 17 80-160GB AT Hard Disk Drive ATA Bus Interface and ATA Commands SMART SA VE A TTRIBUTE V ALUES B0h D3h SMART WRITE L OG B0h D6h ST ANDBY 96h, E2h ST ANDBY IMMEDIA TE 94h, E0h W.
Maxtor DiamondMax 17 80-160GB AT Hard Disk Drive 5-5 ATA Bus Interface and ATA Commands 5.5.3 Identify Drive Command This command allows the host to receive parameter information from the drive. When the command is received, the drive: 1. Sets BSY 2. Stores the required parameter information in the sector buffer 3.
5-6 Maxtor DiamondMax 17 80-160GB AT Hard Disk Drive ATA Bus Interface and ATA Commands 47 15-8: 80h 7-0: 00h = Reserved 01h-FFh: = Maximum number of sectors that shall be tr ansferr ed per interrupt on READ/ WRITE MUL TIPLE commands 48 Reserved 49 Capabilities 15-14: Reserved f or the IDENTIFY P ACKET DEVICE command.
Maxtor DiamondMax 17 80-160GB AT Hard Disk Drive 5-7 ATA Bus Interface and ATA Commands 53 15-3: Reserved 2: 1 = the fields r eported in wor d 88 are v alid. 0 = the fields r eported in wor d 88 are not v alid 1: 1 = the fields r eported in wor ds (70:64) are v alid.
5-8 Maxtor DiamondMax 17 80-160GB AT Hard Disk Drive ATA Bus Interface and ATA Commands 68 Minimum PIO transf er cycle time with IORDY fl ow contr ol 15-0: Cycl e time in nanoseconds 69-70 Reserv ed (for futur e command overlap and queuing) 71-74 Reserv ed for IDENTIFY P ACKET DEVICE command.
Maxtor DiamondMax 17 80-160GB AT Hard Disk Drive 5-9 ATA Bus Interface and ATA Commands 81 Minor ver sion number 0000h or FFFFh = device does not r eport version.
5-10 Maxtor DiamondMax 17 80-160GB AT Hard Disk Drive ATA Bus Interface and ATA Commands 83 7: See Addr ess Offset Reserved Ar ea Boot, INCITS TR27:2001 6: 1 = SET FEA TURES subcommand r equired to sp.
Maxtor DiamondMax 17 80-160GB AT Hard Disk Drive 5-11 ATA Bus Interface and ATA Commands 85 7: 1 = r elease int errupt enabled 6: 1 = look-ahead enabl ed 5: 1 = write cache enabl ed 4: Shall be clear ed to zero t o indicate that the P ACKET Command f eature set is not supported.
5-12 Maxtor DiamondMax 17 80-160GB AT Hard Disk Drive ATA Bus Interface and ATA Commands 87 6: 1 = WRITE DMA FUA EXT and WRITE MUL TIPLE FUA EXT commands support ed 5: General Purpose Logging f eature.
Maxtor DiamondMax 17 80-160GB AT Hard Disk Drive 5-13 ATA Bus Interface and ATA Commands 93 Har dware r eset result. The cont ents of bits (12:0) of this word shall change onl y during the ex ecution of a har dware r eset 15: Shall be clear ed to zero.
5-14 Maxtor DiamondMax 17 80-160GB AT Hard Disk Drive ATA Bus Interface and ATA Commands 97 Str eam Acces s Latency - DMA 98-99 Streaming P erformance Gr anularity 100-103 Maximum user LBA for 48-bit Addr ess f eature set.
Maxtor DiamondMax 17 80-160GB AT Hard Disk Drive 5-15 ATA Bus Interface and ATA Commands 128 Security status 15-9: Reserved 8: Security le vel 0 = High, 1 = Maximum 7-6: Reserved 5: 1 = Enhanced secur.
5-16 Maxtor DiamondMax 17 80-160GB AT Hard Disk Drive ATA Bus Interface and ATA Commands.
Maxtor DiamondMax 17 80-160GB AT Hard Disk Drive 6-1 Chapter 6 Service and Support 6.1 GETTING HELP Before contacting Maxtor Support, use the Hard Disk Information feature in MaxBlast to view the model number and serial number of your drive.
Service and Support 6-2 Maxtor DiamondMax 17 80-160GB AT Hard Disk Drive.
Glossary Maxtor DiamondMax 17 80-160GB AT Hard Disk Drive G-1 A ACCESS – (v) Read, write, or update information on some storage medium, such as a disk. (n) One of these operations. ACCESS TIME – The interval between the time a request for data is made by the system and the time the data is available from the drive.
Glossary G-2 Maxtor DiamondMax 17 80-160GB AT Hard Disk Drive CRC – Acronym for Cyclic Redundancy Check . An error detection code that is recorded within each sector and is used to see whether parts of a string of data are missing or erroneous.
Glossary Maxtor DiamondMax 17 80-160GB AT Hard Disk Drive G-3 FORMATTED CAPACITY – The amount of room left to store data on the disk after the required space has been used to write sector headers, boundary definitions, and timing information generated by a format operation.
Glossary G-4 Maxtor DiamondMax 17 80-160GB AT Hard Disk Drive LOGICAL FORMAT – The logical drive geometry that appears to an AT system BIOS as defined by the drive tables and stored in CMOS. With an installation program like Disk Manager, the drive can be redefined to any logical parameters necessary to adapt to the system drive tables.
Glossary Maxtor DiamondMax 17 80-160GB AT Hard Disk Drive G-5 PLATTER – An disk made of metal (or other rigid material) that is mounted inside a fixed disk drive. Most drives use more than one platter mounted on a single spindle (shaft) to provide more data storage surfaces in a small package.
Glossary G-6 Maxtor DiamondMax 17 80-160GB AT Hard Disk Drive SPINDLE – The center shaft of the disk upon which the drive’s platters are mounted. SPUTTER – A type of coating process used to apply the magnetic coating to some high-performance disks.
Ein wichtiger Punkt beim Kauf des Geräts Maxtor 80-160GB (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Maxtor 80-160GB noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Maxtor 80-160GB - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Maxtor 80-160GB reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Maxtor 80-160GB erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Maxtor 80-160GB besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Maxtor 80-160GB verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Maxtor 80-160GB. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Maxtor 80-160GB gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
