Benutzeranleitung / Produktwartung BabyView 725 des Produzenten Marmitek
Zur Seite of 36
B A B Y VIEW 20611/20131210 • BA BY VI EW 7 25 ALL RIGHTS RESERVED MARMITEK © U S E R M A N U A L B A B Y V IE W 7 2 5.
© MARMITEK 2.
BABYVIEW 725 3 SAFETY WARNINGS This product is NOT intended to replace proper supervision of children. You MUST chec k your child’s activity regularly, as this produc t will not alert parents to silent activ ities of a child. STRANGULATION HAZARD - K eep cord out of child's reach.
© MARMITEK 4 Do not open the product (batter y panel excepted): the device may contai n live parts. The product should only be repaired or serv iced by a qualified expert. Keep batteries out of the reach of children. Dispose of batteries as chemi cal waste.
BABYVIEW 725 5 TABLE OF CONTENTS SAFETY WARNINGS ................................................. 3 TABLE OF CONTENTS ............................................. 5 SET INCLUDES ......................................................... 6 INTRODUCTION .
© MARMITEK 6 Display Frequency and White Balance Se tting . 24 Delete Camera .................................................. 24 Add Camera ................................ ...................... 25 Flip Function ................................ ..
BABYVIEW 725 7 IN TRODUCTION Congratulations on your purchase of your BabyView 725 video baby monitor. The Marmitek BabyView 725 vi deo baby monitor provides you with round- the -cl ock support and it allows you to see your bab y day and night from anywhere in the house.
© MARMITEK 8 FEATURES 2.4” Touchscreen for easy operati on Digital, secure transmission tec hnology for 100% privacy Selectable standby function with adjus table voice activation (VOX) .
BABYVIEW 725 9 COMPONENT IDENTIFICATIO N Camera 1. Night Light 2. Power indicator LED 3. Lens 4. Microphone 5. Power adapter plug 6. Antenna 7. Light sensor 8.
© MARMITEK 10 Monitor 1. Power button 2. Talkback button 3. Power indicator LED 4. Microphone 5. VOX indicator LED 6. Volume indicator LEDs 7. Speaker 8.
BABYVIEW 725 11 INSTALLATION Camera Setup Power Supply - Using AC Power Plug one end of the provided power adapte r into a wall outlet and the other end into the back of the camera. Note 1: Use the adapter labeled OUTP UT: 6V DC with the camera. Note 2: Press and hold the Po wer button over two seconds to turn off the camera.
© MARMITEK 12 Fine Tuning Place the camera in a convenient loc ation, point the lens toward the observation area. Night Vision The camera has eight high-i ntensity LEDs for picking up clear images in the dark. W hen the light sensor detects low ambient light level s, the LEDs will be automatically activated.
BABYVIEW 725 13 night light will start blinking (orange light). This will turn on the power of camera and camera will wait for pairing. 2. Press the Power button to turn on the monitor and the power LED will light up (green). 3. Go in the submenu add Came ra on the monitor.
© MARMITEK 14 Monitor Setup Power Supply The monitor uses a 3.7V 700mA H (Li-ion) battery or the household AC power current . Loading the Battery 1. O pen the battery compartment cover on the rear of the monitor. 2. I nsert the battery with the metal facing the battery compartment.
BABYVIEW 725 15 Using AC Power 1. Plug one end of the provided power ada pter into a wall outlet and the other en d into the monitor, the "Power" LED will appear red. Note : Use the adapter labeled O UTPUT: 6V DC with the monitor. 2. Press the POWER button to turn on the monitor.
© MARMITEK 16 Talkback Function Press the talkback button to speak through the camera unit. Menu Options 1. Press the menu button on the monitor unit to display the main menu on the screen (touch panel).
BABYVIEW 725 17 (Fig.10) Brightness Setting (Fig. 11) Volume Setting (Moni tor) (Fig.12) Camera Selecti on (Fig.13) Temperature Setting (Fig. 14) VOX Function Next Page (Fig. 17) Volume Setting (Came ra) (Fig. 18) Music Function (Fig. 19) Night Light Setting (Fig.
© MARMITEK 18 Brightness Setting ( Brightness ) In this submenu you can adjust brightnes s of the screen..
BABYVIEW 725 19 Volume Setting ( Monitor ) In this submenu you can adjust v olume level on monitor side. Camera Selection ( Camera Sel ect ) In this submenu you can select whi ch camera that you want to display on the screen.
© MARMITEK 20 Temperature Setting ( Temp. Se tting ) 1. In this submenu you can choose the temperature unit between degrees Cels ius or degrees Fahrenheit. 2. You can set the temperature ra nge of the temperature alert. When the temperature is outsi de the range, the temperature indicator on the panel of monitor will blinking.
BABYVIEW 725 21 VOX (Voice-Operated Transmis sion) Function 1. This submenu lets you choose the VOX sensitivity level. With the level set to high, the microphone will detect lower sounds. 2. When you enable the VOX on the monitor unit, the icon will light up.
© MARMITEK 22 Volume Setting (Camera) In this submenu you can adjust vol ume level on camera side. Music Function You can play music with the came ra (three songs) . 1. Press the music button , the camera will play the first song. 2. Press the button , the camera will play the next song.
BABYVIEW 725 23 Night Light Setting 1. When you enable the auto mode , the icon will light up. You can choose the s ensitivity level. With the level set to high, the light sensor will detect higher light. 2. When the light from the camera r eaches the set level, the night light will turn on as in the setting.
© MARMITEK 24 Display Frequency and White Balance Se tting 1. In this submenu you can choose what freq uency and color temperature are better on the m onitor. 2. There are three types of color tem perature and two frequencies (50Hz or 60Hz ). Delete Camera In this submenu you can delete a paired camera.
BABYVIEW 725 25 Add Camera The system comes with a camera unit that has already been paired with the monitor unit. The pairing function gives each camera unit a separate channel on the monito r unit. This is necessary for configuring additional camera unit s.
© MARMITEK 26 Flip Function In this submenu you can flip the video verticall y when mounting the camera on the ceiling. Restore Default In this submenu you can reset the system to default.
BABYVIEW 725 27 STATUS INFORMATIO N Status Bar The status bar will be disp layed on the top of the screen. 1. Camera number indicator 2. Signal strength indicator 3.
© MARMITEK 28 Warning Alarm Status Indication Action Out of range Lost connection Continuous beeps for one minute Move the monitor closer to the camera. Check the power of camera. Temperature alarm 2 consecutiv e beeps and temperature indicator on the screen blinking Check the temperature of camera side.
BABYVIEW 725 29 OPTIONAL ACCESSORI ES Extra Camera (Up to 8 cameras) Extra Monitor (Up to 2 monitors) FREQUENTLY ASKED Q UESTIONS You don't get any signal at all Make sure the camera and the mo nitor are turned on. Make sure the power plugs are p ushed all the way in.
© MARMITEK 30 CARE AND MAINTENANCE Keep all parts and accessories out of children's reach. Fingerprints or dirt on the lens surfac e can adversely affect camera perf ormances.
BABYVIEW 725 31 video may be broadcast to other 2 .4 GHz receiving devices. Conversations , even from rooms near the camera, may be b roadcast. To protect the privacy of your home, always turn the camera off when not in use.
© MARMITEK 32 TECHNICAL DATA Camera RF frequency 2.4 GHz Antenna Monopole antenna Transmission Range Up to 150 m free field, up to 50 m through walls and ceilings Modulation/Demodulation GFSK Date rate 4M Image sensor Color CMOS Effective pixels 320H x 240V pixels Lens f 3.
BABYVIEW 725 33 DECLARATION OF CON FORMITY Hereby, Marmitek BV, declar es that this BABYVIEW 725 is in compliance with th e essential requirements and o ther relevant provisions of the following Direc.
© MARMITEK 34 Environmental Information for Customers in the European Union European Directive 2002/96/EC r equires that the equipment bearing this symbol on the product and/or its packagi ng must not be disposed of with unsorted muni cipal waste.
BABYVIEW 725 35 COPYRIGHTS Marmitek is a trademark of Pattitu de B.V. BabyView 725™ is a trademark of Marmitek B.V. All rights reserved. Every effort has been made to en sure that the information in this manual is ac curate. Marmitek is not responsible for printing or cleric al errors.
© MARMITEK 36.
Ein wichtiger Punkt beim Kauf des Geräts Marmitek BabyView 725 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Marmitek BabyView 725 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Marmitek BabyView 725 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Marmitek BabyView 725 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Marmitek BabyView 725 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Marmitek BabyView 725 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Marmitek BabyView 725 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Marmitek BabyView 725. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Marmitek BabyView 725 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
