Benutzeranleitung / Produktwartung Q290 des Produzenten Manitowoc Ice
Zur Seite of 45
Q MODEL DISPENSER Q160/290/300 Service Manual Thank you for selecting a Manitowoc Dispenser, the dependability leader in ice making equipment and related products. With proper care and maintenance, your new Manitowoc Dispenser will provide you with m any years of reliable and economical performance.
Safety Notices Installation and start-up of this equipment should be done by a qualified service technician. When using or servicing a Q Model Dispenser, be sure to pay close attention to the safety notices in this manual. Disregarding the notices may lead to serious injury and/or damage to the dispenser.
Table of Contents i Table of Contents Section 1 – Troubleshooting Model/Serial Number Location ................................................................................................... ........................... 1-1 Model Numbers Covered in Manual .
Table of Contents ii THIS PAGE INTENTIONALLY LEFT BLANK.
Section 1 Troubleshooting 1-1 Troubleshooting This manual is a reference guide for the owner/operator, service agent and installer of this equipment. Please read this manual before installation or operation of the machine. If you encounter a problem, first consult the Trouble shooting Guide or Adjustments sections of this manual.
Troubleshooting Section 1 1-2 Warranty Information The packet containing this manual also includes warranty information. Warranty coverage begins the day your new dispenser is installed. Important Complete and mail the OWNER WARRANTY REGISTRATION CARD as soon as possible to validate the installation date.
Section 1 Troubleshooting 1-3 Equipment Overview The operation of the Q Series ice dispenser can be divided into three main operations. They are Dispenser Activation, Ice Pick-Up and Ice Delivery. Dispenser Activation Dispenser activation can be accomplished with a number of different mechanisms.
Troubleshooting Section 1 1-4 Room Key Card Activation 1. User places ice bucket under ice chute. 2. User places their hotel room key card into a slot on the dispenser which is labeled “Insert Room Key Card”. The room key activates the microswitch.
Section 1 Troubleshooting 1-5 WARNING Unplug unit before servicing or cleaning. Ice dispenser bin contains parts that can move at any time and will cause injury if hands are in the way. WARNING Unplug unit before servicing or cleaning. The agitator is operated by a timer and can agitate at anytime Electric Shock Hazard.
Troubleshooting Section 1 1-6 Problem: Ice Does Not Dispense When Ro cking Chute is Depressed. (continued) Problem Possible Cause To Correct The gearmotor runs, but the dispensing paddle wheel does not turn. Remove the paddle wheel pin. Is this pin broken, damaged, or missing? Remove the agitator and paddle wheel.
Section 1 Troubleshooting 1-7 Problem: Dispenser Crushes Ice as it Dispenses Problem Possible Cause To Correct Dispenser crushes ice as it dispenses. The ice in the bin is not the proper size and type? Is the ice being used a full size piece of ice, i.
Troubleshooting Section 1 1-8 THIS PAGE INTENTIONALLY LEFT BLANK.
Section 2 Component Disassembly 2-1 Disassembling the Dispenser Parts For Cleaning WARNING Unplug unit before servicing or cleaning. The agitator is operated by a timer and can agitate at anytime. Electric Shock Hazard. 1 Shut off water to ice machine.
Component Disassembly Section 2 2-2 Disassembling the Dispenser Parts For Cleaning (continued) 5 Lift the front panel off the catch hooks and set the panel aside. Removing the Drain Pan 1 The drain pan is visible when the front panel of the dispenser is removed.
Section 2 Component Disassembly 2-3 Removing the Drain Pan (continued) 4 Remove the inner drain pan. Clean the inner drain pan with sanitizing solution. (See page 4-9.) 5 After cleaning, place inner drain pan back into outer drain pan. 6 Slide drain pan back into place.
Component Disassembly Section 2 2-4 Disassembling the Rocking Chute/Door (continued) 3 Remove door lock. 4 Loosen the two thumbscrews of the metal support bracket.
Section 2 Component Disassembly 2-5 Disassembling the Rocking Chute/Door (continued) 8 Remove the two thumb screws from the plastic paddle wheel guard retainer. 9 Remove the paddle wheel guard retainer 10 Pull the stainless steel paddle wheel guard from the slot that is cut into the chute… 11 …and remove the paddle wheel guard retainer.
Component Disassembly Section 2 2-6 Re-Installing the Paddle Wheel Guard 1 When re-assembling the rocking chute/door, the paddle wheel guard is placed in the slot in the ice chute. Notice that a cylinder hinge is welded to the top front side of the paddle wheel guard, as shown in the picture above.
Section 2 Component Disassembly 2-7 Disassembling the Dispenser Parts For Bin Cleaning WARNING Unplug unit before servicing or cleaning. Ice dispenser bin contains moving parts that can move at any time and will cause injury if hands are in the way.
Component Disassembly Section 2 2-8 Disassembling the Dispenser Parts For Bin Cleaning (continued) 5 Move the agitator to one side and slide the agitator forward until the rear of the agitator shaft is clear of the bushing. 6 Remove the agitator from the bin area.
Section 2 Component Disassembly 2-9 Removal of the Gearmotor WARNING Unplug unit before servicing or cleaning. Electric Shock Hazard. 1 Remove the front panel from dispenser. (See pages 4-1 and 4-2.) 2 Remove paddle wheel pin, agitator, and paddle wheel.
Component Disassembly Section 2 2-10 Gearmotor Shaft Seal Replacement WARNING Unplug unit before servicing or cleaning. The agitator is operated by a timer and can agitate at anytime Electric Shock Hazard. 1 If the dispenser is top mounted with an ice machine, remove the ice m achine front panel.
Section 2 Component Disassembly 2-11 Gearmotor Shaft Seal Replacement (continued) 5 Locate the shaft seal on the underside of the bin insulator plate. CAUTION Know which side of the shaft seal you are accessing, the convex side or the concave (ridge) side.
Component Disassembly Section 2 2-12 Gearmotor Shaft Seal Replacement (continued) 8 Press the bin insulator plate back into place. 9 Replace the three bolts. Using a 7/16” nut driver, tighten a quarter turn past tight. 10 Replace the paddle wheel, agitator and paddle wheel pin in the dispenser.
Section 3 Electrical 3-1 Agitation Timer 121$'-867$%/(7,0(5:7(673,16 7KHQHZWLPHULVHTXLSSHGZLWKWHVWSLQV7KLV DOORZVRXWR.
Electrical Section 3 3-2 5H:LULQJ3URFHGXUH $ZLULQJFKDQJHPXVWEHPDGHLIWKHH[LVWLQJWLP HU RQWKHGLVSHQVHULVZLUHGZLWKWKHHOORZ.
Section 3 Electrical 3-3 121$'-867$%/(7,0(5 7KHDJLWDWLRQWLPHULVVWDQGDUGHTXLSPHQWIRUWKH IORRUVWDQGLQJGLVSHQVHU7KHSXUSRVHRI.
Electrical Section 3 3-4 $'-867$%/(7,0(5 7KHDJLWDWLRQWLPHULVVWDQGDUGHTXLSPHQWIRUWKH IORRUVWDQGLQJGLVSHQVHU7KHSXUSRVHRIWKH.
Section 3 Electrical 3-5 Adjusting the Coin Mechanism Timer 5HPRYHWKHFRQWUROER[FRYHU2QWKHLQVLGHRI WKHFRQWUROER[WKHUHLVDZKL.
Electrical Section 3 3-6 Wiring Diagrams 43$43$4)$ 3+ %HIRUH6HULDO1XPEHUV 32:(5 &25' 69 25$1*( %/$&.
Section 3 Electrical 3-7 43$43$4)$ 3+ 6HULDO1XPEHUVWR 25$1*( %/$&.
Electrical Section 3 3-8 43$43$4)$ 3+ $IWHU6HULDO1XPEHUV 32:(5 &25' 69$ 25$1*( %/$&.
Section 3 Electrical 3-9 43$43$4)$ %HIRUH6HULDO1XPEHUV 69 25$1*( %/$&.
Electrical Section 3 3-10 43$43$4)$ 6HULDO1XPEHUV.
Section 3 Electrical 3-11 43$43$4)$ $IWHU6HULDO1XPEHUV.
Electrical Section 3 3-12 45$45$&$5'23(5$7(' 3+ 3+ %HIRUH6HULDO.
Section 3 Electrical 3-13 45$45$&$5'23(5$7(' 3+ 3+ $IWHU6HULDO1XPEHUV 69$ $*,7$ 7,217,0(5 < :+,7( %/$&.
Electrical Section 3 3-14 45$45$&$5'23(5$7(' 3+ %HIRUH6HULDO1XPEHUV 69 $*,7$ 7,217,0(5 <(//2: :+,7( %/$&.
Section 3 Electrical 3-15 45$45$&$5'23(5$7(' 3+ %HIRUH6HULDO1XPEHUV $*,7$ 7,217,0(5 <(//2: :+,7( %/$&.
Electrical Section 3 3-16 4&$4&$&2,123(5$7(' 3+ 3+ %HIRUH6HULD.
Section 3 Electrical 3-17 4&$4&$&2,123(5$7(' 3+ 3+ $IWHU6HULDO.
Electrical Section 3 3-18 4&$4&$&2,123(5$7(' 3+ %HIRUH6HULDO1XPEHU $*,7$ 7,217,0(5 <(//2: :+,7( * %/8( 25$1*( 5(' %/$&.
Section 3 Electrical 3-19 4&$4&$&2,123(5$7(' 3+ After Serial Number 0405000000 $*,7$ 7,217,0(5 <(//2: :+,7( * %/8( 25$1*( 5(' %/$&.
.
W e reserve the right to make product improvements at any t ime. Specifications and design are subje ct to cha nge wi thou t noti ce. MANITOWOC ICE, INC. 2110 South 26th Street P.O. Box 1720 Manitowoc, W I 54221-1720 Phone: ( 920) 682-0161 Service Fax: ( 920) 683-7585 W eb Site - www.
Ein wichtiger Punkt beim Kauf des Geräts Manitowoc Ice Q290 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Manitowoc Ice Q290 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Manitowoc Ice Q290 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Manitowoc Ice Q290 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Manitowoc Ice Q290 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Manitowoc Ice Q290 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Manitowoc Ice Q290 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Manitowoc Ice Q290. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Manitowoc Ice Q290 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
