Benutzeranleitung / Produktwartung TS 2775 des Produzenten Magnavox
Zur Seite of 32
Color Television Owner's Manual.
Once your MAGNAVOX purchase is registered, you're etJgible _o t_ceiw, all the privileges o'[ owning cJ MAGNAVOX product. So complete and return the Warranty Registration Card enclosed with your purchase at once. And take advantage of these important benefits.
SAFETY INSTRUCTIONS - Read before operating equipment This product was designed and manufactured to meet strict quality and safety standards. There are, however, some installation and operation precautions which you should be particularly aware of. 1.
Introduction Welcome/Registration ol Your TV ............................ 2 Safety/Precautions ..................................................... 3 Table of Contents ....................................................... 4 Features ...............
ur Cable IV input nto your home may be a single (75 ohm) cable, or a Converter Box installation. In either case the connection to the TV is very easy. Just put the threaded end of the cable signal to the TV's antenna plug and screw it down tight.
Press the POWER button to n turn the TV ON. _ Press the VOLUME UP (A) or DOWN (Y) button to adjust the sound level. <_ Press the CHANNEL UP (&) I r DOWN (V) button to select TV channels. <_ Point the remote control toward the remote sensor window on the TV when operating the TV with the remote.
m- irst Time Setup automatically takes care of some basic TV control settings for you. Follow the steps in this section to quickly add area channel numbers into the TV's memory, and set the TV for your connected signal (Antenna or Cable.) <_ With SETUP control selected, press (+) button (on the TV or remote) to show the list of SETUP items.
<. OeTE: If you went through tup (see page 7), this task has already been completed for you. You need to make sure that the TV is set to pick up either Cable TV stations or Antenna signals. In other words, the TV needs to know whether you have connected a Cable TV signal or a normal antenna to its ANTENNA plug.
OeTE: lf you went through tup (see page 7), this task has already been completed for you. Your TV can automatically set itself for local area (or Cable TV) channels. This makes it easy for you to select only the TV stations in your area when the CH(annel) • • buttons are pressed.
uto Progranmting (see previous page) adds all the channels it can find (on your Antenna or Cable TV system) into the TV's memory. Add/Delete Channels makes it easy for you to add other channels, or drop unwanted channels, from the list of channels in the TV's memory.
m f-_losed Captioning allows you to Ik,,, read the voice content of television programs on the TV screen. Designed to help the hearing impaired this feature uses on-screen "text boxes" to show dialogue and conversations while the TV program is in progress.
our TV can receive broadcast stereo 71/ programs. The TV has both an amplifier and twin speakers through which the stereo sound can be heard. '_ Press the MENU (M) button on the remote, then press the CHANNEL • or • buttons (or the MENU • or • buttons on the TV) to select the word STEREO with the TV's on- screen Arrow.
1" ]'se the Volume Bat control to see !,M the TV' s volume level settings on the TV screen. Once set the Volume Bar will be seen each time the VOLUME buttons (on the TV or remote) are pressed.
__.Tave you ever fallen asleep in • •front of the TV only to have it wake you up at two in the morning with a test pattern screeching in your ears? Well, your TV can save you all that trouble by automatically turning itself off.
_ '_o adjust your TV picture J_controls, select a channel and follow the step.below." Press the MENU button (M) on the remote, then press the CHANNEL • or • buttons (or the MENU • or • buttons on the TV) until the desired control shows on- screen.
< Uld you like to hear TV rograms through your audio hi-fi system? The TV's Audio Output jacks and TV Speaker On/Off control work together to offer you this TV sound option. cff -ffm3 [_A Connect the and L(eft) R(ight) UDIO OUT jacks on the TV to the R and L Audio Input jacks on your amplifier or sound system.
ou can view the playback of VCR tapes (Video Disc Players, camcorders, etc). by using the AUDIO and VIDEO INPUT jacks (on the rear of the TV). For example: to view the playback of a VCR tape: <_ Connect the VIDEO and <__ AUDIO IN(put) jacks on the TV to the AUDIO and VIDEO OUT(put) jacks on the VCR.
After installing the batteries (see page 6) into the remote, press the TV System button to send remote commands to the TV. Point the remote toward the front of the TV (remote sensor window ) when pressing buttons. V(_R Buttons For use of VCR buttons see the "Using the Remote With a VCR" section on page 19.
m ¥ ¥ with a VCR, first make certain it is set to control your VCR ( by the REMOTE CODE or SEARCH method - see earlier section). <_ Press the VCR System I button on the remote. <_ Point the top of the remote toward the front of the VCR (remote sensor window) when pressing buttons.
hmether you're watching a ovie or a video game your TV has automatic picture settings matched for your current program source or content. The Smart Picture feature quickly resets your TV's picture for a number of different types of programs and viewing conditions you may have in your home.
"list'" ol aeries oJpreviously viewed channels can be selected with the SURF button on your remote control. With this feature you can easily switch between different TV programs that currently interest you. The Smart Surf control allows you to set up to 10 channels in its quick viewing "list".
A < our remote conlrol is set to work your TV and many infrared remote (IR ) control VCRs. However, an easy one- time step may be necessary before the remote will work your VCR. Try this initial check to see if going on to the following section is necessary.
ow that you have looked up the two-digit Remote Code Number for your brand of VCR (on previous page), you are ready to follow the four simple steps below. Please read through steps 1.4 before beginning. Press and release the I STATUS button. <_ Within seconds after thirty releasing the REC button, press and release the VCR System button.
< our remote control is set to work your TV and many infrared remote (IR ) control Cable Converters. However, an easy one-time step may be necessary before the remote will work your Converter. Try this initial check to see if going on to the following section is necessary.
ow that you have looked up the two-digit Remote Code Number for your brand of Cable Converter (on previous page), you are ready to follow the four simple steps below. Please read through steps 1.4 before beginning. <_;_ Press and release the I STATUS button.
our TV remote can be set to work your VCR or Cable Converter by what is called the SEARCH method. If the "REMOTE CODE" number method shown in the previous section did not set your remote to work your VCR or Converter, then follow the easy steps listed below.
lease make these simple checks before calling for service. Theses tips can save you time and money since charges for TV installation and adjustment of customer controls are not covered under your warranty.
Coaxial Cable * A single _olid antenna w_Ic nommlly matched with a metal plug (F-type) end connector that screws (or pushes) directly onto a 75 Ohm input found on the Television or VCR. Closed Caption * Broadcast standard which allows you to read the voice content of television programs on the TV screen.
Philips Consumer Electronics Company Factory Service Center Locations Seattle/Tacoma Area -- See Reverse Side for More Details. San Francisco/Metro Area _geles/San _)iego • Phoenix/Metro Area Detroit/Toledo Rockford F • Chicago Cleveland/N Ohio Columbus/Dayton/Cincinnati • Boston/S Maine/ Dallas/Ft.
QUALITY SERVICE IS AS CLOSE AS YOUR TELEPHONE! SIMPLY LOOKOVER THE LIST BELOW FOR THE NUMBER OF A FACTORY SERVICE CENTER NEAR YOU. YOUR PRODUCT WILL. RECEIVEEFFICIENT AND EXPEDIENT CARRY-IN, MAIL-IN, OR IN-HOME SERVICE, AND YOU WILL RECEIVE PEACEOF MIND, KNOWING YOUR PRODUCT IS BEING GIVEN THE EXPERT ATTENTIONOF PHILIPS' FACTORY SERVICE.
COLOR TELEVISION 90 Days Free Labor One Year I-ree Replacen|ent of Parts (Two Years Free ReplacelJ_unt un Color Picture I ube) This product can be repaired in-home. WHO IS COVERED? You must have proof of purchase to receive warranty service. A sales receipt or other document showing that you purchased the product is considered proof of purchase.
$u_ect to c_age wltheut notice. Availability subject to change at #me of purchase. When ordering accessories outside the U.S.A., please reler to the accessories material, address, and prices tot that country SRG125 TV/Cable Surge Protector YourCost $19.
Ein wichtiger Punkt beim Kauf des Geräts Magnavox TS 2775 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Magnavox TS 2775 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Magnavox TS 2775 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Magnavox TS 2775 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Magnavox TS 2775 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Magnavox TS 2775 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Magnavox TS 2775 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Magnavox TS 2775. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Magnavox TS 2775 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
