Benutzeranleitung / Produktwartung Firewire OPtion Card fot Onyx Mixer des Produzenten Mackie
Zur Seite of 40
OWNER’S MANUAL FIREWIRE OPTION CARD for ONYX MIXERS.
2 ONYX FireWir e Card ONYX Fir eWir e Car d 3 Owner’ s Manual Owner’ s Manual 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water . 6. Install in accordance with the manufacturer’ s instructions.
2 ONYX FireWir e Card ONYX Fir eWire Car d 3 Owner’ s Manual Owner’ s Manual Don’t forget to visit our website at www .mackie.com for more information about this and other Mackie products. T able of Contents I n t r o d u c t i o n . . . . . . .
4 ONYX FireWir e Card ONYX Fir eWire Car d 5 Owner’ s Manual Owner’ s Manual Introduction Thank you for choosing to upgrade your Onyx mixing console with the Onyx FireW ire card.
4 ONYX FireWir e Card ONYX Fir eWire Car d 5 Owner’ s Manual Owner’ s Manual System Requirements These are the minimum r equirements for your computer system to use the Onyx FireW ire interface.
6 ONYX FireWir e Card ONYX Fir eWire Car d 7 Owner’ s Manual Owner’ s Manual Installing the Onyx FireWire Card Important: Although the Onyx FireW ire Card has a protective cover on both sides of the card, it does contain static-sensitive compo- nents.
6 ONYX FireWir e Card ONYX Fir eWire Car d 7 Owner’ s Manual Owner’ s Manual Set the blank plate aside. Y ou won’t need it again, unless you want to remove the Onyx FireW ire card sometime in the futur e. Then you’ll want to reinstall the blank plate.
8 ONYX FireWir e Card ONYX Fir eWire Car d 9 Owner’ s Manual Owner’ s Manual Getting Started For the PC: When connecting the Onyx FireW ire card to a PC, it is necessary to rst install the drivers and the control panel.
8 ONYX FireWir e Card ONYX Fir eWire Car d 9 Owner’ s Manual Owner’ s Manual 4. The next window displays the Software License Agr eement. Click "Y es" to ac- cept the terms of the agreement.
10 ONYX FireWir e Card ONYX Fir eWire Car d 11 Owner’ s Manual Owner’ s Manual 6. The next window explains that the device drivers are r eady to be installed. Click "Next." 7. This next window may open to warn that the software being installed has not passed Windows Logo testing.
10 ONYX FireWir e Card ONYX Fir eWire Car d 11 Owner’ s Manual Owner’ s Manual 8. The next window tells you to connect the FireW ire card to your computer .
12 ONYX FireWir e Card ONYX Fir eWire Car d 13 Owner’ s Manual Owner’ s Manual 11. When the wizard indicates that the installation is nished, click “Finish.” 12. The “Found New Hardware W izard” opens again to install the Onyx FireW ire Sub C driver .
12 ONYX FireWir e Card ONYX Fir eWire Car d 13 Owner’ s Manual Owner’ s Manual 13. When the wizard indicates the installation is nished, click “Finish.” Now , if you have a second Onyx mixer with a FireW ire card installed, it is time to connect it to your computer and turn it on.
14 ONYX FireWir e Card ONYX Fir eWire Car d 15 Owner’ s Manual Owner’ s Manual 16. The “Found New Hardware W izard” opens once again for the Onyx FireW ire WDM Audio installation. Select “Install the software automatically” option, and click “Next.
14 ONYX FireWir e Card ONYX Fir eWire Car d 15 Owner’ s Manual Owner’ s Manual 18. When the wizard indicates the installation is nished, click “Finish.” Y our new software is now installed and r eady to use with any Windows XP ASIO or WDM host application (i.
16 ONYX FireWir e Card ONYX Fir eWire Car d 17 Owner’ s Manual Owner’ s Manual If using two Onyx mixers with FireWire cards: It is necessary to turn on one mixer rst, followed by the second mixer . They appear sequentially as 36 inputs x 4 outputs.
16 ONYX FireWir e Card ONYX Fir eWire Car d 17 Owner’ s Manual Owner’ s Manual 3. Click the Audio Devices tab, and select Onyx FireW ire in the “Properties For” drop-down box. 4. Here you can change the sample rate used by your OS and applications.
18 ONYX FireWir e Card ONYX Fir eWire Car d 19 Owner’ s Manual Owner’ s Manual Channel Assignments The following chart shows the order of the channels for each of the three Onyx mixers as they appear in a DA W application.
18 ONYX FireWir e Card ONYX Fir eWire Car d 19 Owner’ s Manual Owner’ s Manual Onyx 1640 Liv e Mix and Multitrack Recor ding to a Laptop via FireWire This hookup diagram demonstrates how you can do a live multitrack re- cording to a laptop using the FireWire card.
20 ONYX FireWir e Card ONYX Fir eWire Car d 21 Owner’ s Manual Owner’ s Manual Onyx 1640 Multitrac k Recording and Mixdo wn Monitoring Sixteen channels are recorded to the laptop, and two mixdown channels are returned to the Onyx mixer for post-take monitoring through the Control Room speakers.
20 ONYX FireWir e Card ONYX Fir eWire Car d 21 Owner’ s Manual Owner’ s Manual Onyx 1640 Multitrac k Recording and Mixdo wn Monitoring with Six Monitor Mixes Sixteen channels are recorded to the laptop, and two mixdown chan- nels are returned to the Onyx mixer for post-take monitoring through the Control Room speakers.
22 ONYX FireWir e Card ONYX Fir eWire Car d 23 Owner’ s Manual Owner’ s Manual Onyx 1620 Recording Multiple K eyboards and K eyboard Synths directly to a Laptop The FireWire card allows you to record directly from the Onyx mixer to a laptop or DA W without the need for a computer audio interface.
22 ONYX FireWir e Card ONYX Fir eWire Car d 23 Owner’ s Manual Owner’ s Manual T utorials W e’re assuming at this point, that you have done the setup procedur e described on pages 8-17, so that the Onyx FireW ire card is r ecognized by your computer and communicating with your software application.
24 ONYX FireWir e Card ONYX Fir eWire Car d 25 Owner’ s Manual Owner’ s Manual 3. Navigate to the location where you want to save your new project, enter a name in the pop-up dialog box, then click Save. All of this project’s tracks, clips, and edits are saved her e by T racktion, and new audio is recorded in the folder .
24 ONYX FireWir e Card ONYX Fir eWire Car d 25 Owner’ s Manual Owner’ s Manual 7. Make sure all of the inputs ar e enabled. If any of them say “disabled,” click it to enable it. 8. Reopen the Onyx Control Panel (click “show ASIO control panel).
26 ONYX FireWir e Card ONYX Fir eWire Car d 27 Owner’ s Manual Owner’ s Manual 9. Click on the “projects” tab, and double-click on “new edit #1” (or whatever you have renamed your edit) to open the edit scr een. This new project starts with 8 horizontal tracks, stacked vertically .
26 ONYX FireWir e Card ONYX Fir eWire Car d 27 Owner’ s Manual Owner’ s Manual 13. Click the Record button in the bottom right section of T racktion to start recording (or pr ess the R key on the keyboard).
28 ONYX FireWir e Card ONYX Fir eWire Car d 29 Owner’ s Manual Owner’ s Manual Studio Recording T utorial P r el im i n a ry S te ps Make sure all of the channels and mixer settings ar e set up correctly , and the Onyx FireW ire port is connected to the computer .
28 ONYX FireWir e Card ONYX Fir eWire Car d 29 Owner’ s Manual Owner’ s Manual 5. Click on the “settings” tab at the top of the T racktion screen, click the “audio devices” tab, and select Onyx ASIO Driver as the W ave device.
30 ONYX FireWir e Card ONYX Fir eWire Car d 31 Owner’ s Manual Owner’ s Manual nd the right balance between performance and monitoring delay . If you hear pops, clicks, or distortion in the audio, increase the latency setting. Y ou can use the CPU bar in the lower right corner of T racktion to monitor how much CPU horsepower is available.
30 ONYX FireWir e Card ONYX Fir eWire Car d 31 Owner’ s Manual Owner’ s Manual 11. Congure all the inputs and outputs as mono tracks by clicking on each input arrow and deselecting the "treat as ster eo pair" button in the Properties panel.
3 2 ONYX FireWir e Card ONYX Fir eWire Car d 33 Owner’ s Manual Owner’ s Manual 14. Y ou can monitor the recording by assigning all the channels to the L/R mix on the Onyx mixer , and selecting MAIN MIX in the CONTROL ROOM/PHONES SOURCE section. This provides direct monitoring through a pair of monitors connected to the Control Room Outputs.
3 2 ONYX FireWir e Card ONYX Fir eWire Car d 33 Owner’ s Manual Owner’ s Manual 2. Push the FIREWIRE button in the CONTROL ROOM/ PHONES SOURCE section of your Onyx mixer to hear playback of the recorded tracks. Mute all the channels except channel 1 (the overdub vocal part) on the Onyx mixer .
34 ONYX FireWir e Card ONYX Fir eWire Car d 35 Owner’ s Manual Owner’ s Manual Appendix A: Ser vice Information W arranty Ser vice Details concerning W arranty Service are spelled out in the W arranty section on page 38. If you think your Onyx FireW ire card has a problem, please do everything you can to conrm it before calling for service.
34 ONYX FireWir e Card ONYX Fir eWire Car d 35 Owner’ s Manual Owner’ s Manual Repair Service for Mackie products is available at our galactic headquarters, located in sunny W oodinville, W ashington. Service for Mackie products living outside the United States can be obtained through local dealers or distributors.
36 ONYX FireWir e Card ONYX Fir eWire Car d 3 7 Owner’ s Manual Owner’ s Manual Appendix B: T echnical Info Onyx FireWire Card Specications Mic In to FireW ire Card to DA W , routed back to Fir.
36 ONYX FireWir e Card ONYX Fir eWire Car d 3 7 Owner’ s Manual Owner’ s Manual T op of Onyx FireWire Card O O MAX .
38 ONYX FireWir e Card ONYX Fir eWire Car d 39 Owner’ s Manual Owner’ s Manual A. LOUD T echnologies Inc. warrants all materials, workmanship and proper operation of this product for a period of three years from the original date of purchase.
38 ONYX FireWir e Card ONYX Fir eWire Car d 39 Owner’ s Manual Owner’ s Manual 4. If the Authorized Mackie Service Center is located in another city , pack the mixer in its original shipping carton. More information on packing can be found in the Service section of this manual.
16220 W ood-Red Road NE • Woodinville, W A 98072 • USA United States and Canada: 800.898.3211 Europe, Asia, Central and South America: 425.487 .4333 Middle East and Africa: 31.20.654.4000 F ax: 425.487 .4337 • www .mackie.com E -mail: sales@mackie.
Ein wichtiger Punkt beim Kauf des Geräts Mackie Firewire OPtion Card fot Onyx Mixer (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Mackie Firewire OPtion Card fot Onyx Mixer noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Mackie Firewire OPtion Card fot Onyx Mixer - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Mackie Firewire OPtion Card fot Onyx Mixer reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Mackie Firewire OPtion Card fot Onyx Mixer erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Mackie Firewire OPtion Card fot Onyx Mixer besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Mackie Firewire OPtion Card fot Onyx Mixer verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Mackie Firewire OPtion Card fot Onyx Mixer. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Mackie Firewire OPtion Card fot Onyx Mixer gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
