Benutzeranleitung / Produktwartung 1642-VLZ3 des Produzenten Mackie
Zur Seite of 32
1 6 4 2-VLZ3 OWNER’S MANUAL 16-Channel Mic/Line Mixer.
2 1642- VLZ3 164 2- VLZ3 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water . 6. Clean only with a dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’ s instructions.
3 Owner’ s Manual Owner’ s Manual Other Nuggets of Wisdom For optimum sonic performance, the channel fad- ers and the MAIN MIX fader should be set near the “U” (unity gain) markings. Always turn down the MAIN MIX fader and CONTROL ROOM and PHONES knobs before making connections to your 1642-VLZ3, or turning PHANTOM POWER on.
4 1642- VLZ3 164 2- VLZ3 Introduction Thank you for choosing a Mackie professional com- pact mixer . The 1642-VLZ3 is equipped with our precision-engineer ed XDR2 TM Extended Dynamic Range premium studio-grade mic pr eamps Now that you have your 1642-VLZ3, fi nd out how to get the most from it.
5 Owner’ s Manual Owner’ s Manual Contents IMPOR T ANT SAFETY INSTRUCTIONS ........................ 2 INTRODUCTION ...................................................... 4 HOOKUP DIAGRAMS............................................... 6 P A TCHBA Y DESCRIPTION E-Z INTERF ACING .
6 1642- VLZ3 164 2- VLZ3 HOOKUP DIAGRAMS Recording System Stereo Processor P ow ered Monitors Cassette Recorder 8 T r ack Recorder Out In F rom Mics, K e ys, Drum machines etc.
7 Owner’ s Manual Owner’ s Manual Live Stereo P A System Mic 1-5 Processor Processor Drum Machine Mono EQs, M-1400i Amps, and (C300) P assive Stage Monitors K eyboard Bass Mono Effects Stereo Effe.
8 1642- VLZ3 164 2- VLZ3 Patchbay Description At the risk of stating the obvious, this is where you plug everything in: microphones, line-level instruments and effects, and the ultimate destination for your sound: a tape recorder , PA system, etc.
9 Owner’ s Manual Owner’ s Manual This 15 dB of attenuation can be very handy when you are inserting a signal that is very hot, or you want to add a lot of EQ gain, or both. Without this “virtual pad,” a scenario like this might lead to channel clipping.
10 1642- VLZ3 164 2- VLZ3 5. DIRECT OUT Only on channels 1–8, these 1/4" balanced jacks deliver the signal from the very end of the channel path; post-GAIN [3], post-EQ [32], post-LOW CUT [34], post- F ADER [25], and post-MUTE [30]. Use these for record- ing, making the 1642-VLZ3 perfect for an 8-track studio.
11 Owner’ s Manual Owner’ s Manual Dry Signal(s) Dry Signal(s) Aux Send Aux Return Wet Signal Channel P ath Mix Stage Output Section P rocessed Signal Signal P rocessor (e.g., Reverb) Dry Signal P rocessed Signal Insert Send Insert Return Signal P rocessor (e.
12 1642- VLZ3 164 2- VLZ3 11. T APE OUTPUT These unbalanced RCA jacks tap the main mix outputs to make simultaneous record- ing and P A work more convenient. Connect these to your 2-track recorder’ s inputs. See MAIN MIX F ADER [37] on page 18 for details of the signal routing to these outputs.
13 Owner’ s Manual Owner’ s Manual As a general guide, you should turn on your mixer fi rst, before the power amplifi er or powered speakers, and turn it off last. This will reduce the possibilities of any turn-on, or turn-off thumps in your speakers.
14 1642- VLZ3 164 2- VLZ3 Channel Strip Description 26. ASSIGN (1–2, 3–4, L/R) Alongside each channel fader are four buttons, labeled SOLO, 1–2, 3–4 and L/R. The bottom three ar e collectively referr ed to as channel assignment switches. 1, 3 and L are the left sides of these ster eo pairs, and 2, 4 and R are the right sides.
15 Owner’ s Manual Owner’ s Manual LEVEL SET (PFL) taps the channel signal before the fader . If you have a channel’s fader set way below “U” (unity gain), SOLO won’t know that and will send a unity gain signal to the con- trol room, headphones, and meters.
16 1642- VLZ3 164 2- VLZ3 CONST ANT LOUDNESS ! ! ! The 1642-VLZ3’s P AN [31] controls employ a design called “Constant Loudness.” It has nothing to do with living next to a freeway .
17 Owner’ s Manual Owner’ s Manual 33. 4-BAND FIXED-FREQUENCY EQ The stereo channels (9-16) have a 4-band, fi xed-fre- quency equalization: LOW shelving at 80 Hz, LOW MID peaking at 400 Hz, HI MID peaking at 2.5 kHz, and HI shelving at 12 kHz. Each of these fi lters provides up to 15 dB of boost or cut.
18 1642- VLZ3 164 2- VLZ3 Output Section Description Y ou’ve just learned about the input channels and how the signals get in and out. The signals come in via MIC [1] and LINE [2] input jacks, are manipulated by the channels, and then sent to the output section.
19 Owner’ s Manual Owner’ s Manual 40. T APE IN (LEVEL) This knob controls the level of the stereo signal com- ing from the T APE [12] INPUT RCA jacks. Its range is off when fully down, unity at the center detent, with 20 dB additional gain turned fully up, which may come in handy if you’ve patched in a device with wimpy output levels.
20 1642- VLZ3 164 2- VLZ3 44. MODE (NORMAL (AFL)/LEVEL SET (PFL)) Y ou may have already seen some of this in the SOLO discussion, but in case you missed it: The 1642-VLZ3’s solo system comes in two .
21 Owner’ s Manual Owner’ s Manual Meters vs. Reality Y ou may already be an expert at the world of “+4” (+4 dBu=1.23 V) and “–10” (–10 dBV=0.32 V) operating levels. Basically , what makes a mixer one or the other is the relative 0 dB VU (or 0 VU) chosen for the meter display .
22 1642- VLZ3 164 2- VLZ3 50. AUX SENDS SOLO and LED In live sound situations, AUX SEND [6] outputs 1 and 2 are likely to feed your stage monitors. Y ou’ll want to check the mix you’re sending them, and that’ s what these two buttons are for . (AUX 3 and 4 have no such switch.
23 Owner’ s Manual Owner’ s Manual 55. C-R/PHNS ONL Y (for RETURN 4) Once again, the default for all the STEREO RETURNS [7] is to feed them directly into the main mix. Y ou’ve just learned about the optional exceptions involving STEREO RETURN 3.
24 1642- VLZ3 164 2- VLZ3 Appendix A: Ser vice Information W arranty Ser vice Details concerning the Limited W arranty are spelled out on page 31 of this manual. If you think your 1642-VLZ3 has a problem, please check out the following troubleshooting tips and do your best to confi rm the problem.
25 Owner’ s Manual Owner’ s Manual “XLR” Connectors Mackie mixers use 3-pin female “XLR” connectors on all microphone inputs, with pin 1 wired to the grounded (earthed) shield, pin 2 wired.
26 1642- VLZ3 164 2- VLZ3 Special Mackie Connections The balanced-to-unbalanced connection has been anticipated in the wiring of Mackie jacks. A 1 ⁄ 4 " TS plug inserted into a 1 ⁄ 4 " TRS balanced input, for example, will automatically unbalance the input and make all the right connections.
27 Owner’ s Manual Owner’ s Manual Direct out with no signal interruption to master. Insert only to first “c lick.” Channel Insert jack Channel Insert jack Channel Insert jack Direct out with signal interruption to master. Insert all the way in to the second “c lick.
28 1642- VLZ3 164 2- VLZ3 Appendix C: T echnical Information Specifi cations Main Mix Noise (20 Hz–20 kHz bandwidth, 1/4" Main out, channel gains @ unity gain, channel EQs fl at, all channels assigned to Main Mix, odd channels panned left, even channels panned right.
29 Owner’ s Manual Owner’ s Manual Block Diagram M AI N L S UB 3 MA I N R S UB 2 S UB 1 S UB 4 A UX 1 A UX 2 A UX 3 A UX 4 SIP L SIP R P FL L OG IC 75Hz HPF MID HI 80 100 ? 8K 12K LO L R 1 2 3 4 S.
30 1642- VLZ3 164 2- VLZ3 T rack Sheet Session: Note s: Dat e :.
31 Owner’ s Manual Owner’ s Manual A. LOUD T echnologies Inc. warrants all materials, workmanship and proper operation of this product for a period of three years from the original date of purchase.
16220 W ood-Red Road NE • W oodinville, WA 98072 • USA United States and Canada: 800.898.3211 Europe, Asia, Central and S outh America: 425.487 .4333 Middle East and Africa: 31.20.654.4000 F ax: 425.487 .4337 • www .mackie.com E -mail: sales@mackie.
Ein wichtiger Punkt beim Kauf des Geräts Mackie 1642-VLZ3 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Mackie 1642-VLZ3 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Mackie 1642-VLZ3 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Mackie 1642-VLZ3 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Mackie 1642-VLZ3 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Mackie 1642-VLZ3 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Mackie 1642-VLZ3 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Mackie 1642-VLZ3. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Mackie 1642-VLZ3 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
