Benutzeranleitung / Produktwartung MDW 9031DCP des Produzenten Lucent Technologies
Zur Seite of 161
503-801-1 66 Comcode 1 08626532 October 1 999 Issue 3 T ransT alk ® 9000 Digital Wireless System MDW 9031/9031DCP Wireless Pocket Phone Installation and Use.
Copyr ight © 1999 by Luce nt Technolo gies. All rights res erved. For trad emark, regu latory com pliance, and r elated leg al informati on, see th e Copy ri gh t an d Leg al N ot ice s secti on.
MDW 9031/9031DCP Wireless Pocket P hone Installation and Use 503-801-166 Issue 3 October 1999 i Copyright and Legal Notices Copyright Copyrigh t © 1999 by Lucen t Technologies. All rights reserved. Printed in U.S.A. Notice Every ef fort has been made to ensure that the inf ormation in this book was complete and accurate at the time o f printing.
Copyright and Legal Notices MDW 9031/9031DCP Wireless Poc ket Phone Installation and Use 503-801-166 ii Issue 3 October 1999 Customer Supp ort In the continental U.
Contents MDW 9031/9031DCP Wireless Pocket P hone Installation and Use 503-801-166 Issue 3 October 1999 iii Copyright and Legal Notices i 1 Introducti on 1 About T ransT alk ® 900 0 Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents MDW 9031/9031DCP Wireless Poc ket Phone Installation and Use 503-801-166 iv Issue 3 October 1999 Changing the Commun ications Sys tem Setting . . . . . . . . . . . . . . . . . . . . . . 6 1 Filling Out the Hands et Label . . . . . . . . . . .
Contents MDW 9031/9031DCP Wireless Pocket P hone Installation and Use 503-801-166 Issue 3 October 1999 v Battery Ch arger Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1 7 6 MDW 9031/9031DCP Pocket Phone Compatibility 121 Overview .
Contents MDW 9031/9031DCP Wireless Poc ket Phone Installation and Use 503-801-166 vi Issue 3 October 1999.
MDW 9031/9031DCP Wireless Pocket P hone Installation and Use 503-801-166 Issue 3 October 1999 1 1 Introduction About T ransT alk ® 9000 Products Congratulation s on the purchase of your new Tr ansT alk 9000 Digital Wireless System MDW 90 31 /90 31 DCP Pocket Phone .
1 Introduction About TransTalk ® 9000 Products MDW 9031/9031DCP Wireless Poc ket Phone Installation and Use 503-801-166 2 Issue 3 October 1999 The following illustrati ons sh o w which phone models and carriers can be used together: If you have a Model 117A1 Carrier .
About the MDW 9031/9031DCP Poc ket Phone Introduction 1 MDW 9031/9031DCP Wireless Pocket P hone Installation and Use 503-801-166 Issue 3 October 1999 3 About the MDW 9031/9031DCP Pocke t Phone The MDW 9031/903 1DCP Pocket Phone is no t only wireless, but it is also lig htweight and pocket-sized.
1 Introduction About the MDW 9031 /9031DCP Pocket Phone MDW 9031/9031DCP Wireless Poc ket Phone Installation and Use 503-801-166 4 Issue 3 October 1999 Parts Li st Along wi th this bo ok and the MDW 9031 /9031DCP P ocket Ph one Quick R eference, the b ox should contain the items s hown below .
About the MDW 9031/9031DCP Poc ket Phone Introduction 1 MDW 9031/9031DCP Wireless Pocket P hone Installation and Use 503-801-166 Issue 3 October 1999 5 Additional Parts The follo wing pa rts may be necessary , depending upo n your installation.
1 Introduction About the MDW 9031 /9031DCP Pocket Phone MDW 9031/9031DCP Wireless Poc ket Phone Installation and Use 503-801-166 6 Issue 3 October 1999 Spare Bat tery and Head se t One nickel metal hydride battery pack, which provides u p to 3 hours o f tal k time, comes with your MDW 9031/903 1DCP Pocket Phone.
MDW 9031/9031DCP Wireless Pocket P hone Installation and Use 503-801-166 Issue 3 October 1999 7 2 Installing the MDW 9031/9031DCP Pocket Phone Important Safe ty In structions This book contains instru.
2 Installing t he MDW 9031/ 9031DCP Poc ket Phone Important S afety Instru ctions MDW 9031/9031DCP Wireless Poc ket Phone Installation and Use 503-801-166 8 Issue 3 October 1999 Cardiac Pace ma kers ! CAUTION: The MDW 9031/9031D CP hand set is a ra dio devi ce and, l ike all ra dio devices, s hould not be placed n ext to a pa cemaker .
Important Safety Instructions Installing the MDW 9031/9031DCP P ocket Phone 2 MDW 9031/9031DCP Wireless Pocket P hone Installation and Use 503-801-166 Issue 3 October 1999 9 • Read and understand all instr uct ions in th is book before using this product.
2 Installing t he MDW 9031/ 9031DCP Poc ket Phone Important S afety Instru ctions MDW 9031/9031DCP Wireless Poc ket Phone Installation and Use 503-801-166 10 Issue 3 October 1999 W ARNING: ! The rech argeable batt ery pack may c ontain eleme nts that are har mful to the environment (for ex ample, nickel).
Important Safety Instructions Installing the MDW 9031/9031DCP P ocket Phone 2 MDW 9031/9031DCP Wireless Pocket P hone Installation and Use 503-801-166 Issue 3 October 1999 11 • Thi s produc t us es a 3-p rong pl ug. S uch pl ugs are desig ned for your safety .
2 Installing the MDW 9031/ 9031DCP Pocket Ph one Installation Overview for Radio Modules MDW 9031/9031DCP Wireless Poc ket Phone Installation and Use 503-801-166 12 Issue 3 October 1999 Installation Overview for Radio Mod ules and Carriers This section explains how to install radio mod ules and carriers.
Installation Overv iew for Radio Modules and Carri ers Installing the MDW 9031/9031 DCP Pocket MDW 9031/9031DCP Wireless Pocket P hone Installation and Use 503-801-166 Issue 3 October 1999 13 Key Components Each radio module communicates with a corresponding hand set.
2 Installing the MDW 9031/ 9031DCP Pocket Ph one Installation Overview for Radio Modules MDW 9031/9031DCP Wireless Poc ket Phone Installation and Use 503-801-166 14 Issue 3 October 1999 Using th e expansion cable provided with each carrier , you can lin k up to five carri ers.
Installation Overv iew for Radio Modules and Carri ers Installing the MDW 9031/9031 DCP Pocket MDW 9031/9031DCP Wireless Pocket P hone Installation and Use 503-801-166 Issue 3 October 1999 15 Position.
2 Installing the MDW 9031/ 9031DCP Pocket Ph one Installation Overview for Radio Modules MDW 9031/9031DCP Wireless Poc ket Phone Installation and Use 503-801-166 16 Issue 3 October 1999 • Never install the radio module or carrier(s) above a drop, suspended ceiling.
Installing a Single Ra dio Module Installing the MDW 9031/9031DCP P ocket Phone 2 MDW 9031/9031DCP Wireless Pocket P hone Installation and Use 503-801-166 Issue 3 October 1999 17 Addition al Rules f or Instal ling One or More Carriers • Install carrier(s) with in 15 feet (5 m) of either side of, and within 6 to 8 feet (1 .
2 Installing the MDW 9 031/9031DCP Poc ket Phone Installing a Single Radio Module MDW 9031/9031DCP Wireless Poc ket Phone Installation and Use 503-801-166 18 Issue 3 October 1999 3 Detach the rubber feet from the shipping card. Apply them to mark ed areas on the underside o f the radi o module .
Installing a Single Ra dio Module Installing the MDW 9031/9031DCP P ocket Phone 2 MDW 9031/9031DCP Wireless Pocket P hone Installation and Use 503-801-166 Issue 3 October 1999 19 5 Insert one end o f .
2 Installing the MDW 9 031/9031DCP Poc ket Phone Installing a Single Radio Module MDW 9031/9031DCP Wireless Poc ket Phone Installation and Use 503-801-166 20 Issue 3 October 1999 7 Plug the power cord /AC adapter into a pro perly grounded, 3-prong wall outlet that is not controlled by an on/off switch.
Understanding Carrier s Installing the MDW 9031/9031DCP P ocket Phone 2 MDW 9031/9031DCP Wireless Pocket P hone Installation and Use 503-801-166 Issue 3 October 1999 21 Note: The RADIO LED also may light upon installati on; however , si nce the RADIO LED ha s no significance d uring installation , ignore its operatio n.
2 Installing t he MDW 9031/ 9031DCP Poc ket Phone Understa nding Carrier s MDW 9031/9031DCP Wireless Poc ket Phone Installation and Use 503-801-166 22 Issue 3 October 1999 As the following illustratio.
Understanding Carrier s Installing the MDW 9031/9031DCP P ocket Phone 2 MDW 9031/9031DCP Wireless Pocket P hone Installation and Use 503-801-166 Issue 3 October 1999 23 Setting the 1 17A3 Carrier Powe.
2 Installing t he MDW 9031/ 9031DCP Poc ket Phone Understa nding Carrier s MDW 9031/9031DCP Wireless Poc ket Phone Installation and Use 503-801-166 24 Issue 3 October 1999 Use a nonmetallic, pointed object to set each 1 17A3 carrier’s DIP switch according to the following table.
Understanding Carrier s Installing the MDW 9031/9031DCP P ocket Phone 2 MDW 9031/9031DCP Wireless Pocket P hone Installation and Use 503-801-166 Issue 3 October 1999 25 Setting the 1 17A3 Carrier Cont rol/ Expa nsion DIP Switch The Model 1 17A3 carrier can serve as either a contro l or an expans ion carrier .
2 Installing t he MDW 9031/ 9031DCP Poc ket Phone Understa nding Carrier s MDW 9031/9031DCP Wireless Poc ket Phone Installation and Use 503-801-166 26 Issue 3 October 1999 Use a nonmetallic, pointed object to set each 1 17A3 carrier’s DIP switch according to the following table.
Understanding Carrier s Installing the MDW 9031/9031DCP P ocket Phone 2 MDW 9031/9031DCP Wireless Pocket P hone Installation and Use 503-801-166 Issue 3 October 1999 27 Understanding Y our Model 1 17A.
2 Installing t he MDW 9031/ 9031DCP Poc ket Phone Understa nding Carrier s MDW 9031/9031DCP Wireless Poc ket Phone Installation and Use 503-801-166 28 Issue 3 October 1999 The following char t ex plains the label that id entifies the jacks an d LEDs on the 1 17A4 carrier .
Understanding Carrier s Installing the MDW 9031/9031DCP P ocket Phone 2 MDW 9031/9031DCP Wireless Pocket P hone Installation and Use 503-801-166 Issue 3 October 1999 29 The label at the top of the right side of the carrier is provided to help you interpret the LED lights.
2 Installing the MDW 9 031/9031DCP Pocket Phone Installing a Single Carrier MDW 9031/9031DCP Wireless Poc ket Phone Installation and Use 503-801-166 30 Issue 3 October 1999 Installing a Sing le Carrie.
Installing a Single Ca rrier Installing the MDW 9031/9031DCP P ocket Phone 2 MDW 9031/9031DCP Wireless Pocket P hone Installation and Use 503-801-166 Issue 3 October 1999 31 Installing a Single Carrier on a Shelf or Desk • Y o u wil l not receive optimum performance if the unit is placed on a d esk or low shelf.
2 Installing the MDW 9 031/9031DCP Pocket Phone Installing a Single Carrier MDW 9031/9031DCP Wireless Poc ket Phone Installation and Use 503-801-166 32 Issue 3 October 1999 4 Starting from the leftmost slot (#1), inser t each radio module in to the carrier by hooking it onto th e radio module mounting rod.
Installing a Single Ca rrier Installing the MDW 9031/9031DCP P ocket Phone 2 MDW 9031/9031DCP Wireless Pocket P hone Installation and Use 503-801-166 Issue 3 October 1999 33 6 Insert a telephone line cord in to the bottom of each radio module. 7 Slide the telephone line cords throu gh the rear exit s lots on the bottom of the carrier .
2 Installing the MDW 9 031/9031DCP Pocket Phone Installing a Single Carrier MDW 9031/9031DCP Wireless Poc ket Phone Installation and Use 503-801-166 34 Issue 3 October 1999 8 Insert the free end of th.
Installing a Single Ca rrier Installing the MDW 9031/9031DCP P ocket Phone 2 MDW 9031/9031DCP Wireless Pocket P hone Installation and Use 503-801-166 Issue 3 October 1999 35 10 Place the carrier on its feet towards the back of the shelf or desk, m aking sure it is in a stable position.
2 Installing the MDW 9 031/9031DCP Pocket Phone Installing a Single Carrier MDW 9031/9031DCP Wireless Poc ket Phone Installation and Use 503-801-166 36 Issue 3 October 1999 Installing a Single Carrier on a W all • Install the unit high on a wall, leaving 6 to 12 inches (15.
Installing a Single Ca rrier Installing the MDW 9031/9031DCP P ocket Phone 2 MDW 9031/9031DCP Wireless Pocket P hone Installation and Use 503-801-166 Issue 3 October 1999 37 4 R emove th e plastic cap covering each radio modu le ’ s card edge befor e inserting the radio modu les into the carrier .
2 Installing the MDW 9 031/9031DCP Pocket Phone Installing a Single Carrier MDW 9031/9031DCP Wireless Poc ket Phone Installation and Use 503-801-166 38 Issue 3 October 1999 7 Insert a telephone line co rd into the bottom o f each radio module. 8 Slide the telephone line cords throu gh the cable manager slot on the left fr ont of the carrier .
Installing a Single Ca rrier Installing the MDW 9031/9031DCP P ocket Phone 2 MDW 9031/9031DCP Wireless Pocket P hone Installation and Use 503-801-166 Issue 3 October 1999 39 10 Plug the carrier ’ s AC adapter cord into the left sid e of the carrier .
2 Installing the MDW 9 031/9031DCP Pocket Phone Installing a Single Carrier MDW 9031/9031DCP Wireless Poc ket Phone Installation and Use 503-801-166 40 Issue 3 October 1999 Single Car rier In st allat ion Self-T est To perform a single carrier self-test: 1 A single carrie r must always function as a control carrier .
Installing Multiple C arriers Installing the MDW 9031/9031DCP P ocket Phone 2 MDW 9031/9031DCP Wireless Pocket P hone Installation and Use 503-801-166 Issue 3 October 1999 41 3 If you are using a Model 1 17A4 carrier , verify that the carrier ’ s CONTROL/EXP ANSI ON LED is lit and that its color is green.
2 Installing t he MDW 9031/ 9031DCP Poc ket Phone Installin g Multiple Carr iers MDW 9031/9031DCP Wireless Poc ket Phone Installation and Use 503-801-166 42 Issue 3 October 1999 Multiple-carrier installati on invo lves several stages: • Mounting the carriers on the wall and cabling them.
Installing Multiple C arriers Installing the MDW 9031/9031DCP P ocket Phone 2 MDW 9031/9031DCP Wireless Pocket P hone Installation and Use 503-801-166 Issue 3 October 1999 43 4 Pl ace the carrier assembly over the scre ws, then slide it downward to lock it into place.
2 Installing t he MDW 9031/ 9031DCP Poc ket Phone Installin g Multiple Carr iers MDW 9031/9031DCP Wireless Poc ket Phone Installation and Use 503-801-166 44 Issue 3 October 1999 8 Plug an AC adapter cord into the left side of each carrier . 9 Insert each carr ier ’ s power cord into its AC adapter .
Installing Multiple C arriers Installing the MDW 9031/9031DCP P ocket Phone 2 MDW 9031/9031DCP Wireless Pocket P hone Installation and Use 503-801-166 Issue 3 October 1999 45 10 Plug each carrier ’ s power cord into one of the following power sources that is not controlled by an on/off switch: ~ Surge-su pp ressor strip.
2 Installing t he MDW 9031/ 9031DCP Poc ket Phone Installin g Multiple Carr iers MDW 9031/9031DCP Wireless Poc ket Phone Installation and Use 503-801-166 46 Issue 3 October 1999 Multiple Carrier Mount.
Installing Multiple C arriers Installing the MDW 9031/9031DCP P ocket Phone 2 MDW 9031/9031DCP Wireless Pocket P hone Installation and Use 503-801-166 Issue 3 October 1999 47 3 At th is stage of your .
2 Installing t he MDW 9031/ 9031DCP Poc ket Phone Installin g Multiple Carr iers MDW 9031/9031DCP Wireless Poc ket Phone Installation and Use 503-801-166 48 Issue 3 October 1999 Installing a Single Radio Module in Each Car rier To install a single radio module in each carrier: 1 Power down the carriers .
Installing Multiple C arriers Installing the MDW 9031/9031DCP P ocket Phone 2 MDW 9031/9031DCP Wireless Pocket P hone Installation and Use 503-801-166 Issue 3 October 1999 49 4 W hen the card edg e is fully seated, a snap lock on the bottom of the radio module will engage.
2 Installing t he MDW 9031/ 9031DCP Poc ket Phone Installin g Multiple Carr iers MDW 9031/9031DCP Wireless Poc ket Phone Installation and Use 503-801-166 50 Issue 3 October 1999 7 Insert the f ree end.
Installing Multiple C arriers Installing the MDW 9031/9031DCP P ocket Phone 2 MDW 9031/9031DCP Wireless Pocket P hone Installation and Use 503-801-166 Issue 3 October 1999 51 Installation Self-T est w.
2 Installing t he MDW 9031/ 9031DCP Poc ket Phone Installin g Multiple Carr iers MDW 9031/9031DCP Wireless Poc ket Phone Installation and Use 503-801-166 52 Issue 3 October 1999 3 At this stage of your installation, verify that the LEDs disp layed match the first or fourth lines of the SYNC and CONTR OL/EXP LED Codes label.
Installing Multiple C arriers Installing the MDW 9031/9031DCP P ocket Phone 2 MDW 9031/9031DCP Wireless Pocket P hone Installation and Use 503-801-166 Issue 3 October 1999 53 5 The PA S S and POWER LEDs on all radio modul es sh ould be lit and green. If a rad io modu le’ s PA S S LED is not lit: a Power down the carriers.
2 Installing t he MDW 9031/ 9031DCP Poc ket Phone Installin g Multiple Carr iers MDW 9031/9031DCP Wireless Poc ket Phone Installation and Use 503-801-166 54 Issue 3 October 1999 Installing the Remaining Radio Modules To install the remain ing r adio modules: 1 Power down the carriers .
Installing Multiple C arriers Installing the MDW 9031/9031DCP P ocket Phone 2 MDW 9031/9031DCP Wireless Pocket P hone Installation and Use 503-801-166 Issue 3 October 1999 55 4 W hen the card edg e is fully seated, a snap lock on the bottom of the radio module will engage.
2 Installing the M DW 9031/9031DCP Pocket Phone Installing M ultiple Carriers MDW 9031/9031DCP Wireless Poc ket Phone Installation and Use 503-801-166 56 Issue 3 October 1999 7 Slide the telephone lin e cords through the cable manager slo t on the left fr ont of the carrier .
Installing Multiple C arriers Installing the MDW 9031/9031DCP P ocket Phone 2 MDW 9031/9031DCP Wireless Pocket P hone Installation and Use 503-801-166 Issue 3 October 1999 57 9 Power the carriers as f.
2 Installing t he MDW 9031/ 9031DCP Poc ket Phone Installin g Multiple Carr iers MDW 9031/9031DCP Wireless Poc ket Phone Installation and Use 503-801-166 58 Issue 3 October 1999 Installation Self-T es.
Installing Multiple C arriers Installing the MDW 9031/9031DCP P ocket Phone 2 MDW 9031/9031DCP Wireless Pocket P hone Installation and Use 503-801-166 Issue 3 October 1999 59 3 If an OUT OF SYNC LED i.
2 Installing t he MDW 9031/ 9031DCP Poc ket Phone Handset MDW 9031/9031DCP Wireless Poc ket Phone Installation and Use 503-801-166 60 Issue 3 October 1999 Handset This section explains how to install the handset battery pack, change the com munications system settin g, and fill out the handset label.
Handset Installing the MDW 9031/9031DCP P ocket Phone 2 MDW 9031/9031DCP Wireless Pocket P hone Installation and Use 503-801-166 Issue 3 October 1999 61 3 T o remove the battery pack, s lide the spring latch upward (away from the battery pack).
2 Installing t he MDW 9031/ 9031DCP Poc ket Phone Handset MDW 9031/9031DCP Wireless Poc ket Phone Installation and Use 503-801-166 62 Issue 3 October 1999 4 Press and hold “M” ( 6 ) for three seconds to enter Bu tto n M appi ng Mode.
Handset Installing the MDW 9031/9031DCP P ocket Phone 2 MDW 9031/9031DCP Wireless Pocket P hone Installation and Use 503-801-166 Issue 3 October 1999 63 Filling Out the Handset Label MDW 9031/9031DCP Pocket Phone display sh ows the s tatu s of u p to 12 lin es or programmable/intercom/d rop buttons.
2 Installing t he MDW 9031/ 9031DCP Poc ket Phone Batte ry Charger MDW 9031/9031DCP Wireless Poc ket Phone Installation and Use 503-801-166 64 Issue 3 October 1999 Battery Charger This section explains ho w to choo se a location f or th e battery ch ar ger and install it.
Battery Charger Installing the MDW 9031/9031DCP P ocket Phone 2 MDW 9031/9031DCP Wireless Pocket P hone Installation and Use 503-801-166 Issue 3 October 1999 65 5 I nsert the battery ch ar ger ’ s power cord/AC adap ter into the battery charg er . If you are desk-mounting the battery char ger , skip to Step 7.
2 Installing t he MDW 9031/ 9031DCP Poc ket Phone Batte ry Charger MDW 9031/9031DCP Wireless Poc ket Phone Installation and Use 503-801-166 66 Issue 3 October 1999 Inser t i ng a Battery Pac k into th.
Battery Charger Installing the MDW 9031/9031DCP P ocket Phone 2 MDW 9031/9031DCP Wireless Pocket P hone Installation and Use 503-801-166 Issue 3 October 1999 67 The extended b attery pack slides down into the spare ba t tery com partment.
2 Installing t he MDW 9031/ 9031DCP Poc ket Phone Batte ry Charger MDW 9031/9031DCP Wireless Poc ket Phone Installation and Use 503-801-166 68 Issue 3 October 1999 Inserting the Handset into the Batte.
MDW 9031/9031DCP Wireless Pocket P hone Installation and Use 503-801-166 Issue 3 October 1999 69 3 Using the MDW 9031/9031DCP Pocket Phone Important Safe ty In structions Please see “Important Safety I nstructions” at the beginning of Chapter 2.
3 Using t he MDW 9031/ 9031DCP Pocket Phone Handset MDW 9031/9031DCP Wireless Poc ket Phone Installation and Use 503-801-166 70 Issue 3 October 1999 Handset Controls AB 23 4 6 5 MSG 212 555 1212 ON 78.
Handset Using the MDW 9031 /9031DCP Pocke t Phone 3 MDW 9031/9031DCP Wireless Pocket P hone Installation and Use 503-801-166 Issue 3 October 1999 71 Column and Select Buttons The MDW 9031/903 1DCP Poc.
3 Using t he MDW 9031/ 9031DCP Pocket Phone Handset MDW 9031/9031DCP Wireless Poc ket Phone Installation and Use 503-801-166 72 Issue 3 October 1999 Handset Display (with Backlighting) The MDW 9031/9031 DCP Pocket Pho ne display h as one 1 6-alp hanu meric-ch aracter line an d fo ur lines of icons to provid e you with stat us inform at ion.
Handset Using the MDW 9031 /9031DCP Pocke t Phone 3 MDW 9031/9031DCP Wireless Pocket P hone Installation and Use 503-801-166 Issue 3 October 1999 73 When the display is blank, the handset is either turned of f or in the power -saving “sleep” mode.
3 Using t he MDW 9031/ 9031DCP Pocket Phone Handset MDW 9031/9031DCP Wireless Poc ket Phone Installation and Use 503-801-166 74 Issue 3 October 1999 Line St atus Indicato rs There are 12 s tatus indicators; each on e corresponds to a s pecific outside line or programmable/in tercom /d rop button.
Handset Using the MDW 9031 /9031DCP Pocke t Phone 3 MDW 9031/9031DCP Wireless Pocket P hone Installation and Use 503-801-166 Issue 3 October 1999 75 Low Battery Indicator The standard battery pack h as approximately three ho urs of continuou s talk time after being fully ch arged.
3 Using t he MDW 9031/ 9031DCP Pocket Phone Handset MDW 9031/9031DCP Wireless Poc ket Phone Installation and Use 503-801-166 76 Issue 3 October 1999 Attaching the Metal Carrying Clips To attach the me.
Handset Using the MDW 9031 /9031DCP Pocke t Phone 3 MDW 9031/9031DCP Wireless Pocket P hone Installation and Use 503-801-166 Issue 3 October 1999 77 4 Latch the right edge of the clip into the corresponding groove on the inner sid e of the battery pac k.
3 Using t he MDW 9031/ 9031DCP Pocket Phone Handset MDW 9031/9031DCP Wireless Poc ket Phone Installation and Use 503-801-166 78 Issue 3 October 1999 • Line Preselection • Backlighting • Alerter .
Handset Using the MDW 9031 /9031DCP Pocke t Phone 3 MDW 9031/9031DCP Wireless Pocket P hone Installation and Use 503-801-166 Issue 3 October 1999 79 3 W hile still holding " , press O . The handset beeps twice, and the disp lay shows the handset settings, indicating that you are no w in Local Mode.
3 Using t he MDW 9031/ 9031DCP Pocket Phone Handset MDW 9031/9031DCP Wireless Poc ket Phone Installation and Use 503-801-166 80 Issue 3 October 1999 3 While still holdi ng " , press O . The handset beeps twice, and the display shows the handset settings, indicating you are in Local Mode.
Handset Using the MDW 9031 /9031DCP Pocke t Phone 3 MDW 9031/9031DCP Wireless Pocket P hone Installation and Use 503-801-166 Issue 3 October 1999 81 Enabling or Dis abling the Alerter The alerter is an audible s ignal to notify y ou of an incoming call.
3 Using t he MDW 9031/ 9031DCP Pocket Phone Handset MDW 9031/9031DCP Wireless Poc ket Phone Installation and Use 503-801-166 82 Issue 3 October 1999 T est Modes Y ou can use Local T est Mod e and W ireless T est Mode to verify that your han dset is wor king properl y and that the MDW 9031/9031DC P S ystem is performin g opt imally .
Handset Using the MDW 9031 /9031DCP Pocke t Phone 3 MDW 9031/9031DCP Wireless Pocket P hone Installation and Use 503-801-166 Issue 3 October 1999 83 Using Wireless T est Mode Y ou can determine sound clarity , signal streng th, and voice quality using W ireless T est Mode.
3 Using t he MDW 9031/ 9031DCP Pocket Phone Handset MDW 9031/9031DCP Wireless Poc ket Phone Installation and Use 503-801-166 84 Issue 3 October 1999 6 T o determ in e sound clarit y , listen to th e simula ted dial tone as you walk aroun d. A clear , steady ton e indicates good sound clarity .
Handset Using the MDW 9031 /9031DCP Pocke t Phone 3 MDW 9031/9031DCP Wireless Pocket P hone Installation and Use 503-801-166 Issue 3 October 1999 85 The higher the number , the better the v oice quality, as shown in the table below . A low number may indicate potential interfering devices (such as another radio transmitter) in the area.
3 Using t he MDW 9031/ 9031DCP Pocket Phone Handset MDW 9031/9031DCP Wireless Poc ket Phone Installation and Use 503-801-166 86 Issue 3 October 1999 Close U p T est At no mo re than 5 to 10 feet (1. 5 to 3.1 m) f rom its rad io module, u se the follo wing procedure: 1 Make sure the handset is turned off.
Handset Using the MDW 9031 /9031DCP Pocke t Phone 3 MDW 9031/9031DCP Wireless Pocket P hone Installation and Use 503-801-166 Issue 3 October 1999 87 2 With a s ignal strength of 3 , press 2 to check the voice quality . When the voice quality i s 7 or 8 , the voice co nnection should be satisfactory .
3 Using t he MDW 9031/ 9031DCP Pocket Phone Handset MDW 9031/9031DCP Wireless Poc ket Phone Installation and Use 503-801-166 88 Issue 3 October 1999 Making a Cal l T o make a call usin g your MDW 90 3.
Handset Using the MDW 9031 /9031DCP Pocke t Phone 3 MDW 9031/9031DCP Wireless Pocket P hone Installation and Use 503-801-166 Issue 3 October 1999 89 T o deselect the line or button, press O . For information about assigning featu res to buttons, s ee “Programming Features for P AR TNER, MERLIN, and MERLIN LEGEND Systems” in Chapter 6.
3 Using t he MDW 9031/ 9031DCP Pocket Phone Handset MDW 9031/9031DCP Wireless Poc ket Phone Installation and Use 503-801-166 90 Issue 3 October 1999 ! CAUTION: Plug ON L Y the S upra 903 1 headset co rd or the Radium heads et cord int o the headset a dapter .
Battery Charger Using the MDW 9031 /9031DCP Pocke t Phone 3 MDW 9031/9031DCP Wireless Pocket P hone Installation and Use 503-801-166 Issue 3 October 1999 91 Battery Charger The battery char ger char ges battery packs in the spare battery compartment and in the hands et.
3 Using t he MDW 9 031/9031DCP Pocket P hone Battery Charger MDW 9031/9031DCP Wireless Poc ket Phone Installation and Use 503-801-166 92 Issue 3 October 1999 The color of the battery char ger’ s LED.
Battery Charger Using the MDW 9031 /9031DCP Pocke t Phone 3 MDW 9031/9031DCP Wireless Pocket P hone Installation and Use 503-801-166 Issue 3 October 1999 93 Note that your handset will consume power both during talk time (when the handset is turned on) and during standby time (when the hands e t is turned off, but out of the battery charger).
3 Using t he MDW 9 031/9031DCP Pocket P hone Battery Charger MDW 9031/9031DCP Wireless Poc ket Phone Installation and Use 503-801-166 94 Issue 3 October 1999.
MDW 9031/9031DCP Wireless Pocket P hone Installation and Use 503-801-166 Issue 3 October 1999 95 4 Maintaining the MDW 9031/9031DCP Pocket Phone Import ant Sa fety In structio ns Please see “Important Safety I nstructions” at the beginning of Chapter 2.
4 Maintaining the MDW 9031/9031DCP Pocket Phon e Removing Radio Module from Carrier MDW 9031/9031DCP Wireless Poc ket Phone Installation and Use 503-801-166 96 Issue 3 October 1999 2 Unplug the telephon e line cord from the bottom of the r adio module.
Removing Radio Module from Car rier Maintaining the M DW 9031/9031DCP Pocket Phone 4 MDW 9031/9031DCP Wireless Pocket P hone Installation and Use 503-801-166 Issue 3 October 1999 97 5 If you removed a rad io mod ule fr om Sl ot 6 o f an 1 17A3 control carrier , you must insert another radio mod ul e into th is slot.
4 Maintaining the MDW 9031/9031DCP Po cket Phone Swapping Extensions MDW 9031/9031DCP Wireless Poc ket Phone Installation and Use 503-801-166 98 Issue 3 October 1999 Swapping Exte nsions If you w ant .
Swapping Extensions Maintaining the MDW 9031 /9031DCP Pocke t Phone 4 MDW 9031/9031DCP Wireless Pocket P hone Installation and Use 503-801-166 Issue 3 October 1999 99 4 R epower the carrier .
4 Maintaining the MDW 9 031/9031DCP P ocket Phone Replacing Antenna MDW 9031/9031DCP Wireless Poc ket Phone Installation and Use 503-801-166 100 Issue 3 Octobe r 1999 Replacing Ant enna If the antenna.
Ordering Replaceme nt and Optional PartsMaint aining the MDW 9031/9031DCP Poc ket Phone 4 MDW 9031/9031DCP Wireless Pocket P hone Installation and Use 503-801-166 Issue 3 October 1999 101 Outside the continen tal U.S., contact your Lu cent T echnologies Representative or local Authorized Dealer .
4 Maintaining the MDW 9031/9031DCP Po cke t Phon e Ordering Replacement and Optional MDW 9031/9031DCP Wireless Poc ket Phone Installation and Use 503-801-166 102 Issue 3 Octobe r 1999.
MDW 9031/9031DCP Wireless Pocket P hone Installation and Use 503-801-166 Issue 3 October 1999 103 5 T r oubleshooting Procedures If you h ave a prob lem with yo ur MDW 90 31/9031DCP Pocket Pho ne, you ma y be able t o solve i t by foll owing the procedures included in this chapter .
5 Troubleshooting P rocedures MDW 9031/9031DCP Wireless Poc ket Phone Installation and Use 503-801-166 104 Issue 3 Octobe r 1999 Installation Problems Symptom Possible Causes Possible Solutions One or more OUT OF SYNC LEDs is lit, radio module PASS LEDs are not lit, or both.
Procedures Trouble shooting 5 MDW 9031/9031DCP Wireless Pocket P hone Installation and Use 503-801-166 Issue 3 October 1999 105 After you plug t he radio mo dule in to an electrical outlet, the radio mo dule’ s POWER LED lights, but the PA S S LED does not light.
5 Troubleshooting P rocedures MDW 9031/9031DCP Wireless Poc ket Phone Installation and Use 503-801-166 106 Issue 3 Octobe r 1999 LEDs on the car riers were disp l ayi ng correctly accordin g to the three self t ests in “Installing Multiple Carriers” when you installed the carriers and radio modules , but now the LED conditions have changed.
Procedures Trouble shooting 5 MDW 9031/9031DCP Wireless Pocket P hone Installation and Use 503-801-166 Issue 3 October 1999 107 Handset Problems Symptom Possible Causes Possible Solutions After yo u pres s O , displ ay does not sho w any thing . There is no battery pack in the handset.
5 Troubleshooting P rocedures MDW 9031/9031DCP Wireless Poc ket Phone Installation and Use 503-801-166 108 Issue 3 Octobe r 1999 You can hear the party on the other end, bu t they cannot hear y ou. MUTE appears in the handset d isplay . M button was pres sed inadvertently .
Procedures Trouble shooting 5 MDW 9031/9031DCP Wireless Pocket P hone Installation and Use 503-801-166 Issue 3 October 1999 109 Battery Problems Symptom Possible Causes Possible Solutions Battery icon appear s in the handset display . This is normal operation for the MDW 9031 Pock et Phone.
5 Troubleshooting P rocedures MDW 9031/9031DCP Wireless Poc ket Phone Installation and Use 503-801-166 110 Issue 3 Octobe r 1999 The SPARE LED in the spare battery ch arging compartment turns amber instead of red. The battery pack was jostled while in the battery charger.
Procedures Trouble shooting 5 MDW 9031/9031DCP Wireless Pocket P hone Installation and Use 503-801-166 Issue 3 October 1999 111 V oice Qua lity Problems Symptom Possible Causes Possible Solutions Handset vo ice quality and range are n ot as good as they were before.
5 Troubleshooting P rocedures MDW 9031/9031DCP Wireless Poc ket Phone Installation and Use 503-801-166 112 Issue 3 Octobe r 1999 (Continu ed) You hav e a malfunct ioning r adio module. 1 Remove all but one radio module from the carrier . (See “Re movin g Radi o Modu le fr om Carrier” in C hapter 4.
Procedures Trouble shooting 5 MDW 9031/9031DCP Wireless Pocket P hone Installation and Use 503-801-166 Issue 3 October 1999 113 Volume i s too low at any setting and there is noise on the line. Handset or radio module is not working proper ly . Connection between t he radio m odule and the commu nications system switch/ control un it is incorrect .
5 Troubleshooting P rocedures MDW 9031/9031DCP Wireless Poc ket Phone Installation and Use 503-801-166 114 Issue 3 Octobe r 1999 Range Problems Symptom P ossible Causes Possible solutions Handset voice quality and range ar e not as good as they were earlier .
Procedures Trouble shooting 5 MDW 9031/9031DCP Wireless Pocket P hone Installation and Use 503-801-166 Issue 3 October 1999 115 (Co ntinu ed) You have a malfun ctioning rad io module. 1 Remove all but one rad io module from the carrier . (See “Removing Radio Mo dule from Carrier” in Chapte r 4.
5 Troubleshooting P rocedures MDW 9031/9031DCP Wireless Poc ket Phone Installation and Use 503-801-166 116 Issue 3 Octobe r 1999 No ring on an incoming call. Handset is out of range o f its matc hing r adio m odul e . • Station wiring is incorrect. • Radio module statio n wiring is not connected to the switch.
Procedures Trouble shooting 5 MDW 9031/9031DCP Wireless Pocket P hone Installation and Use 503-801-166 Issue 3 October 1999 117 Battery Charger Pr oblems Symptoms Possible Causes Possible Solut ions No LEDs on battery charger light. Battery charger is plugged into an electrical outlet controlled by a switch and the switch is turned off.
5 Troubleshooting P rocedures MDW 9031/9031DCP Wireless Poc ket Phone Installation and Use 503-801-166 118 Issue 3 Octobe r 1999 HANDSET LED flashes red. Battery pack is defective. Contacts in the handset cradle or on the battery pack are dirty . Handset is not seated proper ly in battery char ger’ s handset cradle.
Procedures Trouble shooting 5 MDW 9031/9031DCP Wireless Pocket P hone Installation and Use 503-801-166 Issue 3 October 1999 119 SPARE LED on battery charger flashes red. B attery pack is defective. Contacts on the b attery pack or in the battery char ger’ s spare battery compartment are d irty .
5 Troubleshooting P rocedures MDW 9031/9031DCP Wireless Poc ket Phone Installation and Use 503-801-166 120 Issue 3 Octobe r 1999.
MDW 9031/9031DCP Wireless Pocket P hone Installation and Use 503-801-166 Issue 3 October 1999 121 6 MDW 9031/9031DCP Pocket Phone Compatibility Overview This chapter provides compatibility information for your Pocket Phone.
6 MDW 9031 /9031DCP Pocket P hone Compatibility MDW 9031 Compa tibility MDW 9031/9031DCP Wireless Poc ket Phone Installation and Use 503-801-166 122 Issue 3 Octobe r 1999 For this r elease... O f this communications s ystem... Use the in structions f or a.
MDW 9031 C ompatibility MDW 9031/9 031DCP Pocket Phone C ompatibility 6 MDW 9031/9031DCP Wireless Pocket P hone Installation and Use 503-801-166 Issue 3 October 1999 123 Programming Features for P ART.
6 MDW 9031 /9031DCP Pocket P hone Compatibility MDW 9031 Compa tibility MDW 9031/9031DCP Wireless Poc ket Phone Installation and Use 503-801-166 124 Issue 3 Octobe r 1999 P ARTNER Systems Button Mapp ing for P ARTNER Systems On P AR TNER Systems, the MDW 9031 emu lates an MLS-12D telephon e.
MDW 9031 C ompatibility MDW 9031/9 031DCP Pocket Phone C ompatibility 6 MDW 9031/9031DCP Wireless Pocket P hone Installation and Use 503-801-166 Issue 3 October 1999 125 Setting the Line Ringing Op ti.
6 MDW 9031 /9031DCP Pocket P hone Compatibility MDW 9031 Compa tibility MDW 9031/9031DCP Wireless Poc ket Phone Installation and Use 503-801-166 126 Issue 3 Octobe r 1999 • T o program the Ringing Optio n feature, use the “triang le” and “rectangle” indicators in the di splay as the equivalent of red and green LEDs, res pectively .
MDW 9031 C ompatibility MDW 9031/9 031DCP Pocket Phone C ompatibility 6 MDW 9031/9031DCP Wireless Pocket P hone Installation and Use 503-801-166 Issue 3 October 1999 127 Button Mapp ing for MERLIN Sy stems except M ERLIN 410 and MERLIN 820 On all MERLIN Systems , the MDW 9031 emulates a Model BIS-22D phone (Apparatu s Code 731 5H).
6 MDW 9031 /9031DCP Pocket P hone Compatibility MDW 9031 Compa tibility MDW 9031/9031DCP Wireless Poc ket Phone Installation and Use 503-801-166 128 Issue 3 Octobe r 1999 Button Mapp ing for MERLIN 4 .
MDW 9031 C ompatibility MDW 9031/9 031DCP Pocket Phone C ompatibility 6 MDW 9031/9031DCP Wireless Pocket P hone Installation and Use 503-801-166 Issue 3 October 1999 129 Setting the Line Ringing Op ti.
6 MDW 9031 /9031DCP Pocket P hone Compatibility MDW 9031 Compa tibility MDW 9031/9031DCP Wireless Poc ket Phone Installation and Use 503-801-166 130 Issue 3 Octobe r 1999 Consult your Sy stem Administration manuals for this compatibility .
MDW 9031 C ompatibility MDW 9031/9 031DCP Pocket Phone C ompatibility 6 MDW 9031/9031DCP Wireless Pocket P hone Installation and Use 503-801-166 Issue 3 October 1999 131 ~ If you are p rogramming nu m.
6 MDW 9031 /9031DCP Pocket P hone Compatibility MDW 9031 Compa tibility MDW 9031/9031DCP Wireless Poc ket Phone Installation and Use 503-801-166 132 Issue 3 Octobe r 1999 The 7315H p hones are progr ammed for DEFINITY systems u sing four STATION Administrat ion screens .
MDW 9031 C ompatibility MDW 9031/9 031DCP Pocket Phone C ompatibility 6 MDW 9031/9031DCP Wireless Pocket P hone Installation and Use 503-801-166 Issue 3 October 1999 133 The following ill ustrations sho w in parenthes es the MDW 903 1 Pocket Phone button assi gn ment s on Page s 3 and 4 o f the STAT I ON Adm inistr ation s creen s.
6 MDW 9031 /9031DCP Pocket P hone Compatibility MDW 9031 Compa tibility MDW 9031/9031DCP Wireless Poc ket Phone Installation and Use 503-801-166 134 Issue 3 Octobe r 1999 If your u sers do not need th.
MDW 9031DC P Compatibility MDW 9031/9 031DCP Pocket Phone C ompatibility 6 MDW 9031/9031DCP Wireless Pocket P hone Installation and Use 503-801-166 Issue 3 October 1999 135 MDW 9031DCP Compatibility P.
6 MDW 9031 /9031DCP Pocket P hone Compatibility MDW 9031D CP Compatibility MDW 9031/9031DCP Wireless Poc ket Phone Installation and Use 503-801-166 136 Issue 3 Octobe r 1999 DEFINITY Systems This phone mus t be administ ered as an 8410D p hone for the DEFINIT Y Systems.
MDW 9031DC P Compatibility MDW 9031/9 031DCP Pocket Phone C ompatibility 6 MDW 9031/9031DCP Wireless Pocket P hone Installation and Use 503-801-166 Issue 3 October 1999 137 The following illust rations show in parent hes es the MDW 9031DCP Pocket Ph one button assignmen ts on Pages 3 and 4 of the STATION Administration s creens.
6 MDW 9031 /9031DCP Pocket P hone Compatibility MDW 9031D CP Compatibility MDW 9031/9031DCP Wireless Poc ket Phone Installation and Use 503-801-166 138 Issue 3 Octobe r 1999 Button Mapp ing for DEFINITY Systems On DEFINITY Systems, th e MDW 9031DCP should be alias ed as an 841 0D phone.
MDW 9031DC P Compatibility MDW 9031/9 031DCP Pocket Phone C ompatibility 6 MDW 9031/9031DCP Wireless Pocket P hone Installation and Use 503-801-166 Issue 3 October 1999 139 Setting the Line Ringing Op.
6 MDW 9031 /9031DCP Pocket P hone Compatibility MDW 9031D CP Compatibility MDW 9031/9031DCP Wireless Poc ket Phone Installation and Use 503-801-166 140 Issue 3 Octobe r 1999.
MDW 9031/9031DCP Wireless Pocket P hone Installation and Use 503-801-166 Issue 3 October 1999 141 A W arranty and Repair Information Lucent T ech nologies Lim ited W arra nty and Limi tation of Liabil.
A Warran ty and Repai r Information Repair Information MDW 9031/9031DCP Wireless Poc ket Phone Installation and Use 503-801-166 142 Issue 3 Octobe r 1999 Limitation of Liability Except as pr o vided b.
MDW 9031/9031DCP Wireless Pocket P hone Installation and Use 503-801-166 Issue 3 October 1999 143 B Regulatory Information This append ix contai ns informati on about t he Federal Comm unications C ommission an d Indu stry Canada.
B Regulatory Information Hearing Aid Compatibility MDW 9031/9031DCP Wireless Poc ket Phone Installation and Use 503-801-166 144 Issue 3 Octobe r 1999.
MDW 9031/9031DCP Wireless Pocket P hone Installation and Use 503-801-166 Issue 3 October 1999 145 C Specifications GENERAL Model: MDW 9 031/9031DCP Wireless Pock et Phone Dimensions and Weight s: Hand.
C Speci fications MDW 9031/9031DCP Wireless Poc ket Phone Installation and Use 503-801-166 146 Issue 3 Octobe r 1999 Electrical Specifications: (Power) Battery Pack Life: Handset Batt e ry Charge r (B.
MDW 9031/9031DCP Wireless Pocket P hone Installation and Use 503-801-166 Issue 3 October 1999 147 Index A Alerter 72 , 75 , 78 , 79 , 81 Answ eri n g a call 88 headse t 90 Antenna 74 , 77 replacement .
Index D MDW 9031/9031DCP Wireless Poc ket Phone Installation and Use 503-801-166 148 Issue 3 Octobe r 1999 D DEFINITY Systems 1 DIP switch 117A 3 car rier Contr ol/Expa nsion 21 , 22 , 25 powe r 21 Di.
L Ind ex MDW 9031/9031DCP Wireless Pocket P hone Installation and Use 503-801-166 Issue 3 October 1999 149 L Labels butto n ma pping f or your co mmu nicati ons syste m 63 exte nsi on numbe r 63 hands.
Index Q MDW 9031/9031DCP Wireless Poc ket Phone Installation and Use 503-801-166 150 Issue 3 Octobe r 1999 Programmi ng features DEFINITY Systems 129 MERLIN Sys tems 123 PARTNER Systems 123 Syste m 25.
V Ind ex MDW 9031/9031DCP Wireless Pocket P hone Installation and Use 503-801-166 Issue 3 October 1999 151 V VIBR 73 Vibrator enable/disa ble 78 , 79 icon 73 , 79 test 82 Voice quality maximum 74 , 77.
Index W MDW 9031/9031DCP Wireless Poc ket Phone Installation and Use 503-801-166 152 Issue 3 Octobe r 1999.
✃ ✃ ✃ Battery Charger W a ll-Mounting T em plate Use the template below to positi on the screws for mounting your MDW 9 031 /9031DCP Pocket Phone battery char ger: 1 Cut out the template along the dotted line. 2 Lightly affix the template to the wall wit h tape where you want to attach the battery charger .
Ein wichtiger Punkt beim Kauf des Geräts Lucent Technologies MDW 9031DCP (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Lucent Technologies MDW 9031DCP noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Lucent Technologies MDW 9031DCP - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Lucent Technologies MDW 9031DCP reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Lucent Technologies MDW 9031DCP erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Lucent Technologies MDW 9031DCP besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Lucent Technologies MDW 9031DCP verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Lucent Technologies MDW 9031DCP. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Lucent Technologies MDW 9031DCP gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
