Benutzeranleitung / Produktwartung 100 des Produzenten Lowrance electronic
Zur Seite of 28
Pub. 988-0161-001 www.lowrance.com Radar & RIM 100 Radar Interface Module Installation Instructions.
Copyright © 2006 Lowrance Elect ronics, Inc. All rights reserved. No part of this manual may be copied, reprod uced, republished, trans- mitted or distributed for any purpos e, without prior written consent of Lowrance Electronics. Any unauthorized comm ercial distribution of this manual is strictly p rohibited.
i Table of Contents Warnings and Cautions ............................................................. i Section 1: In troduction............................................................. 1 What is radar? ..........................................
ii Caution: International Regulations for Prev enting Collisions at Sea man- date that when radar is on a vessel, the radar must be used at all times, regardless of weather co nditions or visibility.
1 Section 1: Introduction Thank you for purchasing this Lowrance Ra dar with the RIM 100 radar interface module. Your radar consis ts of three main componen ts: the radar scanner unit, a display unit (s old separately) and the RIM 100 radar interface modu le which connects the scann er unit and the display unit.
2 rate targets at a distance. The critic al factors are the antenna's beam width and side lobe level. Typicall y, a radar antenna will radiat e a tightly foc used beam fr om the front of the array. The longer the an- tenna array is, the narrower th e beam width.
3 False echoes Sometimes radar will display t argets on screen that d o not exist in the real world. You should be aware of h ow and why this happens. A. Ghost echoe s Sometimes one larg e object very near your boat will a ppear as two dif- ferent targets onscree n.
4 Radar interference If another boat's radar is op erating on the sam e frequency as yours, it can create interferenc e on your display. The interferenc e usually appears as sp i r a l o r r a d i a l p a t t e r n s . T h i s r a - dar has an interferenc e rejection control to e liminate interfer ence.
5 The scanner unit should be m ounted on the cent er line of your vessel in a location that has an unobstructed view forw ard and is as clear as pos- sible the rest of the way ar ound the unit.
6 The recommended mounting surfac e thickness is 3/8" to 1/2" (9 mm to 13 mm). If the mounting surface is thin, a doubler should be added. I f it is thicker, longer bolts must be purchase d. WARNING: The scanner will be damaged if bolts penetrate more than 9/16" (15 mm).
7 vent microwave radiation exposure . This antenna is installed cor- rectly. It safely exceeds the recommended separation distance ..
8 Section 2: Radar Installation Preparations Unpack your new radar and check the contents against the pack ing list. Do not remove the cov er from the unit. Ther e are no connections or ad- justments inside the unit that ar e needed for installation or op eration.
9 6. Install and tighten four M10 x 25U (M1 0 x 1") mo unting bo lts. Use anti-corrosive grease on each bolt t o avoid difficulty in rem oving the bolts later on. 7. Uncoil the scanner cable. 8. Secure the cable near th e scanner to support the we ight of the cable and prevent stra in on the watertig ht cable seal.
10 Section 3: RIM 100sp Installation You can install the RIM 100 modul e in some other order if you prefer, but we recommend this installation sequ ence: 1. Select a flat surface near the disp lay unit to mount the module. The location must be c lose enough f or the RIM's RS232 dat a cable to reach the display unit's RS-232 d ata cable.
11 4. Route the radar cabl e to the RIM 100 location. Connec t the RIM 100 radar data cable to the radar antenna power/data output cable using heat-shrink butt conn ectors. Follow instructions on the wir ing diagram that corresponds to your radar an tenna — Detail Drawing A for radome models or Detail Draw ing C for open array mode ls.
12 Cable Connections and Wiring Diagrams Cable connections and wiring diag rams for Lowrance radar, RIM 100 interface module and display unit. These c onnections cover radome models LRA-1000, LRA-1500 and LRA-2000. † Serial device data cab le may need RIM software updat e to use.
13 Detail drawing A: wiring di agram, RIM 100 to radome unit. Detail drawing B: wiring diagram, radomes, RIM 100 to display unit. Large black/pwr – Small black (not used) Large white/pw r + Radar mo.
14 Cable connections and wiring diag rams for Lowrance radar, RIM 100 interface module and display unit. These connec tions cover models LRA-4000, LRA-5000 open array radars.
15 Detail drawing C: Wiring diagra m, RIM 100 to open array unit. Detail drawin g D: wiring diagr am, open arrays, R IM 100 to display un it. Large red + Large white + Large black – Radar motor powe.
16 Lowrance Radar Specifications Model LRA-1000 LRA-1500 LRA-2000 LRA-4000 LRA-5000 Radome Diameter 1.0 ft. 1.5 ft. 2.0 ft. N/A N/A Open Array Length N/A N/A N/A 4.0 ft. 5.0 ft. Power Output 2 kW 2 kW 4 kW 4 kW 4 kW Power Required 30 watts 55 watts 70 watts 85 watts 95 watts Voltage Required 10.
17 FCC Compliance This device complies with Part 15 of the U.S. Federal Communi- cations Commission (FCC) Rules. Operation is subject to the fol- lowing two conditions: (1) this device may not cause harmful in- terference, and (2) this device mu st accept any interference re- ceived, including interference that may cause undesired opera- tion.
18 Notes.
19 Notes.
20 Notes.
21 LOWRANCE ELEC TRONICS FULL ONE-YEAR WA RRANTY "We," "our," or "us" refers to LOWR ANCE ELECTRONICS, INC., the manufacturer of this product. "You" or "your" refers to the first person wh o purchases this p roduct as a consumer item for personal, family or household u se.
22 How to Obtain Service… …in the USA: We back your investm ent in quality products w ith quick, expert service and genuine Lowrance p arts. If you're in the United States and you have technical, retur n or repair questions, pl ease contact the Factory Customer Servic e Department.
Accessory Ordering Information for all countries To order Lowrance accessories for your radar, please contact: 1) Your local marine de aler or consumer electron ics store. Most quality dealers that han dle marine electronic equipment or other consumer electronics should be a ble to assist you with thes e items.
Visit our web site: Lowrance Pub. 988-0161-001 © Copyright 2006 All Rights Reserved Printed in USA 022406 Lowrance Electronics, Inc..
Ein wichtiger Punkt beim Kauf des Geräts Lowrance electronic 100 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Lowrance electronic 100 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Lowrance electronic 100 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Lowrance electronic 100 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Lowrance electronic 100 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Lowrance electronic 100 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Lowrance electronic 100 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Lowrance electronic 100. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Lowrance electronic 100 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
