Benutzeranleitung / Produktwartung LCS-US104 des Produzenten Longshine
Zur Seite of 28
Network USB over IP Server With 1-USB2.0 Port User Manual V1.1 1.
2.
T ABLE OF C ONTENTS C OPYRIGHT ...................................................................................................................................................................... 4 1. INTRODUCTION ...................................
T rademarks Windows 2000/XP/Vista are regist ered trademarks of Microsoft Corp. All other brands and product names are trademarks of their respective companies.
1. Introduction Product Overview The Network USB over IP Servers enhance capab ility by letting you place your USB devices at convenient locations directly on the Ether net network. It’s designed to connect your USB printers, MFP, and USB storage devices to your network, allowing all network users access to these USB devices remotely.
2. Connect the Network USB over IP Server to the router or switch/ HUB with the Ethernet cable. 3. Connect the power adapter to the Network USB over IP Server. When the Link LED lights up, the Network USB over IP Server is correctly connected to the network.
2. The Software Installation For Windows 2000/XP Users 1. Insert the setup CD into your computer . A welcome screen should appear with a menu of options, including the option to install the pr oper Network USB over IP Server software, access the User Manual, or Exit out of the welcome menu.
5. The setup utility will show up and display all the active Network USB over IP Servers on your network. In this screen, you will see the product listed as “ USB over IP Server-8810C0(192.168.0.21) ”. The “8810C0” is the last 6 digit s of the Network USB over IP Server ’s MAC address, and the “ 192.
1. Connect the USB cable on your USB device to the USB port of the Network USB over IP Server , and make sure both the USB device and the Network USB over IP Server are powered on. The USB device will t hen show up on the Network USB over IP Server utility as a green icon.
3. Once the USB device has been connected, the green icon( ) will turn orange( ) to indicate that the connection has been established. The USB device now becomes available on your computer , and you can use this USB device as if it was directly connected to your computer .
Connecting to an USB Printer or Multi-functional Printer 1. Connect the USB cable on your printer or mult i-functional printer to the Network USB over IP Server and make sure your printer is powered on. Y ou will then see the connected printer show up in the USB over IP Server set up utility .
Note: If your printer does not s how up on the list, please try to disconnect and reconnect the printer to the USB port of the Network USB ov er IP Server. Also, please make sure the Network USB ove r IP Server and y our p rinter are p owered on. 2. The printer will be detected as if it was plugged directly into your computer .
Note: Please refer to your printer user manual on how to setup your printer on the computer. Connecting to an USB HUB 1. If you have more than one USB device that you would like to share over your network, you may add an USB HUB(4-port maximum) to the Network USB over IP Server .
setup utility will automatically display the connected USB device(s). If you do not see the USB device(s) that are connected, press “ Search ” button to refresh the list. Note: If your USB device does not show up on the list, please try to disconnect and reconnect the USB device to the USB HUB.
Request to Disconnect 1. If the USB device is being used by another computer on your network, a red icon( ) will be displayed in front of the USB device name. Y ou will not have the option to disconnect the USB device; however , you may send a c ourteous message to request that the other user disconnect/release the USB device.
2. T o send the courteous message, ri ght-click on the USB device and select “ Request Disconnect ”. A message will then be sent to the user requesting that they disconnect from the USB device.
Note: If the occupying user denies this request, then you will not be able to send any further requests to the same user for 5 minutes. This is to prevent any user from flooding the occu py in g user will multi p le re q uests within a short p eriod of time.
Setting the Polling Interval 1. The polling interval will allow the setup utility to pull informati on from your network to find out the status of all connected Network U SB over IP Server and USB devices. T o configure the polling interval, in the utility , click on File -> Settings -> Polling Interval .
2. A Server Setting window will be displayed. Y ou may set the DHCP(default), IP address and password. Moreover , you can upgrade t he firmware and reboot the Network USB over IP Server .
For Windows Vista Users 1. Insert the setup CD into your computer . A welcome screen should appear with a menu of options, including the option to install the pr oper Network USB over IP Server software, access the User Manual, or Exit out of the welcome menu.
4. Click on “ Finish ” to complete the inst allation process. 5. Once the inst allation process has been completed, an “Launch USBoverIP Server” icon will be shown on Desktop. Double click on it for the first time exec ution. Windows V ista will pop up a firewall setup window , please choice “Unblock”.
7. After finishing Firewall setup, USBove rIP utility will finish the setup procedure automatically . Connecting to an USB Device 1. After you have successfully inst alled the Netw ork USB over IP Ser.
3. Right-click on the USB device that you w ant to connect to and select “Connect” to establish the connection. Y ou will see the devic e driver is installing and the status will show at the bottom right co rner on your system tray . Th is message will disapear once the drivers have been installed.
sure the power adapter of the U SB HUB is plugged in and powered on. Note: Network USB over IP server can only support up to 4 USB devices through an USB HUB and certain USB devices require a direct connection to your computer in order to function at full ca p acit y .
3. WEB Management Interface For Windows 2000/XP/Vista Users T o Access WEB management interface in Wi ndows 2000/XP/Vist a, in the USB over IP Server setup utility , select the “USB over IP Server” and double click, OS will open the browser automatically and load the management webpage.
Setup: You can add or change any existing password on t he Network USB over IP Server in this window. By default, the Network USB over IP Se rver does not come wit h a default password. Y ou can change the network settings according to your network specification.
Rest art: The Restart window will allow you to reboot the Network USB over IP Server. Please note that if the Network USB over IP Server has a set password, you will need to enter it into the password field box.
4. Troubleshooting Frequently Asked Questions 1. Why can’t I connect my USB device to my computer through Ne twork USB over IP Server? ● Make sure the USB device functions normally when you plug it into your computer via USB cable.
Ein wichtiger Punkt beim Kauf des Geräts Longshine LCS-US104 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Longshine LCS-US104 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Longshine LCS-US104 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Longshine LCS-US104 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Longshine LCS-US104 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Longshine LCS-US104 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Longshine LCS-US104 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Longshine LCS-US104. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Longshine LCS-US104 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
