Benutzeranleitung / Produktwartung USB100TX des Produzenten Linksys
Zur Seite of 28
Instant EtherFast © Series 10/100 USB Network Adapter Model No.: USB100TX User Guide.
COPYRIGHT & TRADEMARKS Copyright © 2001 Linksys, All Rights Reserved. 10/100 USB Network Adapter is a reg- istered trademark of Linksys. Micr osoft, Windows, and the Windows logo are r egis- tered trademarks of Micr osoft Corporation. All other trademarks and brand names are the property of their respective pr oprietors.
10/100 USB Network Adapter Appendix 35 Client for Microsoft Setup for Windows 98 35 Novell NetWar e 3.x Client Setup for Windows 98 36 Starting Over in Windows 98 37 Starting Over in Windows 2000 41 M.
10/100 USB Network Adapter Package C • One 10/100 USB Netw ork Adapter • One Standard USB Cable • One Dri ver Diskette • One User Guide and Registration Card Windows & Computer Compatibility T o use this device, y ou must hav e Microsoft W indows 98, Millennium, or 2000 installed on your PC.
10/100 USB Network Adapter 4 TX/RX The TX/RX LED will flicker whene ver netw ork data is passing through the 10/100 USB Network Adapter . LINK The Link LED will illuminate Green when the 10/100 USB Netw ork Adapter is connected to a network at 10Mbps, and it will illuminate Orange when it’ s connected at 100Mbps.
10/100 USB Network Adapter 6 Installing the EtherFast 10/100 USB Network Adapter Overview The follo wing instr uctions will help you ph ysically connect your computer to your netw ork through your USB Netw ork Adapter .
10/100 USB Network Adapter 8 W indows 98 Installation & Setup Overview After ph ysicall y installing the 10/100 USB Network Adapter in your comput- er , follow these instructions to install the netw ork driver .
10/100 USB Network Adapter 10 6. A windo w will open saying that Windo ws is no w ready to install the Linksys EtherF ast 10/100 USB Networ k Adapter dri ver . Click Next . 7. W indows will be gin copying the dri ver f iles to your PC. Refer to the chart belo w to help guide you through the process.
10/100 USB Network Adapter 12 Network Component Configuration 1. Once y ou are back at the W indo ws 98 desktop, click on your taskbar's Start button, then Settings , then Control P anel , then double-click the Netw ork icon. 2. The Netw ork windo w will appear .
10/100 USB Network Adapter 14 6. After ensuring that all of the listed netw ork components are installed on your system, in the Primary Networ k Log on box select Client for Micr osoft Netw orks . 7. Click on the Identif ication tab . T ype the name of your computer in the Computer Name box.
10/100 USB Network Adapter 16 13. A Logon windo w will appear , requiring you to enter a User name and P asswor d . Make up a user name and pass w ord (if you ha ven’ t already) and click OK . Do not click the Cancel button or Escape [ESC] key . Clicking either of these buttons will pre vent y ou from lo gging into the netw ork.
10/100 USB Network Adapter 7. When you're done, click on the A pply button, follo wed b y OK . Repeat steps 1-7 for an y driv e or folder you desire to share on the netw ork. Y ou ha v e successfully ena bled File Sharing on y our PC. Y our selected driv es can no w be accessed b y other networ k users.
4. In the f ollo wing screen, y ou will direct Windo ws to the proper location for the dri ver . Select “Search for the best driver for y our device (Recommended)” and click the box beside Specify a location. In the bo x belo w , type “ A:WinME ”.
1. Once y ou are back at the W indo ws Millennium desktop, click on your taskbar's Start button, then Settings , then Control P anel , then double- click the Netw ork icon. 2. The Netw ork windo w will appear . Click on the Conf iguration tab . A windo w similar to the one below will appear .
7. Click on the Identif ication tab . T ype the name of y our computer in the Computer Name box. Choose a name that is unique from the other computer names on the net- w ork. 8. T ype the name of y our w orkgr oup in the W orkgr oup box. The W orkgroup name should be the same W orkg roup Name in use by all of the other PCs on the netw ork.
13. A Logon windo w will appear , requiring you to enter a User name and P asswor d . Make up a user name and pass w ord (if you ha ven’ t already) and click OK . Do not click the Cancel button or Escape [ESC] key . Clicking either of these buttons will pre vent y ou from lo gging into the netw ork.
7. When you're done, click on the A pply button, follo wed b y OK . Repeat steps 1-7 for an y driv e or folder you desire to share on the netw ork. Y ou ha v e successfully ena bled File Sharing on y our PC. Y our selected driv es can no w be accessed b y other networ k users.
10/100 USB Network Adapter 30 3. The Install Har dwar e Device Driver s dialog bo x will appear . When Linksys USB Adapter is display ed , select “Searc h for a suitab le driver for my device (Recommended)” . Click Ne xt . 4. The Locate Driver Files dialog bo x will appear .
10/100 USB Network Adapter 6. The Driver F ile Searc h Results dialog box will appear . Click Next . 7. The Completing the F ound New Har dwar e W izar d dialog bo x will appear . The follo wing adapter name will be shown: Linksys EtherF ast 10/100 USB Networ k Adapter .
10/100 USB Network Adapter • Click on the NetBIOS tab . Put a check next to I want to ena b le NetBIOS o ver IPX/SPX and click OK . Click OK again. • After W indows f inishes copying the appropriate f iles, restar t your com- puter .
10/100 USB Network Adapter 36 Novell NetW are 3.x Client Setup for Windows 98 The instructions below e xplain how to set up the re gular No vell NetW are 3.x client for use on a W indows 98 PC. 1. F ollo w the W indows 98 setup instructions. 2. Start up W indo ws 98.
10/100 USB Network Adapter 38 4. Remov e any instance of the name Linksys in the box. This includes IPX/SPX…Linksys , NetBEUI…Linksys , and TCP/IP…Linksys . Also remo v e Client for Micr osoft Networ ks , Client for NetW are Netw or ks , and F ile and Printer Sharing for Micr osoft Networ ks .
10/100 USB Network Adapter 40 8. If Network Adapter s is listed , then expand it b y clicking on the plus [+] sign and remo ve all de vices with the name Linksys in its description. (If at any point y ou are asked to restart the computer, click No ). 9.
10/100 USB Network Adapter 42 5. Right-click on Linksys EtherF ast 10/100 USB Networ k Adapter . A context menu should open (see the e xample belo w). 6. First, choose Disable . 7. When asked if you w ant to disable the de vice, click Ye s . 8. Right-click on the Linksys EtherF ast 10/100 USB Networ k Adapter again.
10/100 USB Network Adapter 44 IPX/SPX-compatible Protocol Click the Add button. Choose Pr otocol and click the Add button. Select Manufactur er and choose Microsoft . Under the Netw ork Protocol box, high- light IPX/SPX-compatib le pr otocol . Click OK .
10/100 USB Network Adapter 46 • Straight-Through Cabling •Cross-Over Cabling Crimping Y our Own Network Cables Linksys EtherFast ® Series 45 T wisted-Pair Cabling There are dif ferent grades, or categories, of twisted-pair cabling. Cate gory 5 is the most reliable and is highl y recommended.
10/100 USB Network Adapter 48 Customer Support F or help with the installation or operation of your EtherF ast 10/100 USB Netw ork Adapter, contact Linksys Customer Support at one of the phone numbers or Internet addresses below . Customer Support 800-326-7114 949-261-1288 Fa x 949-261-8868 E-mail support@linksys.
© Copyright 2001 Linksys, All Rights Reserved. http://www .linksys.com.
Ein wichtiger Punkt beim Kauf des Geräts Linksys USB100TX (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Linksys USB100TX noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Linksys USB100TX - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Linksys USB100TX reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Linksys USB100TX erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Linksys USB100TX besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Linksys USB100TX verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Linksys USB100TX. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Linksys USB100TX gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
