Benutzeranleitung / Produktwartung SRW208 des Produzenten Linksys
Zur Seite of 142
Model No . WIRED with W ebView 8-P ort 10/100 Ethernet Switch SRW208/SRW208G/SRW208L/SRW208P/SRW208MP User Guide.
WebView Switches Copyright and T rademarks Specifications are subject to change without notice . L inksys is a registered trademark or trademark of Cisco Systems, Inc . and/or its affiliates in the U.S . and certain other countries. Copyright © 2006 Cisco Systems, Inc .
WebView Switches Table of Contents Chapter 1: Introduction 1 Welcome 1 What’s in this User Guide? 3 Chapter 2: Getting to Know the Switch 4 Overview 4 SRW208 - Front Panel 4 SRW208G - Front Panel 5 .
WebView Switches VLAN Management Tab - Ports to VLAN 41 VLAN Management Tab - VLAN to Ports 42 VLAN Management Tab - GVRP 43 Statistics Tab - RMON Statist ics 43 Statistics Tab - RMON History 45 Statistics Tab - RMON Al arm 47 Statistics Tab - RMON Events 48 Statistics Tab - Po rt Utilization 49 Statistics Tab - 802.
WebView Switches Multicast Tab - Bridge Multicast F orward All 77 SNMP Tab - Global Parameters 77 SNMP Tab - Views 78 SNMP Tab - Group Profile 78 SNMP Tab - Group Membership 80 SNMP Tab - Communities .
WebView Switches Appendix G: Regulatory Information 125 Appendix H: Contact Information 131.
WebView Switches List of Figures Figure 2-1: Front Panel of the SRW208 4 Figure 2-2: Front Panel of the SRW208G 5 Figure 2-3: Front Panel of the SRW208L 7 Figure 2-4: Front Panel of the SRW208P 8 Figu.
WebView Switches Figure 4-18: SSH Keys Fingerprints 23 Figure 4-19: Username & Password Settings 24 Figure 4-20: Security Settings 24 Figure 4-21: SSL Certificate Generation 24 Figure 4-22: SSL Ce.
WebView Switches Figure 5-14: VLAN Management - VLAN to Ports 42 Figure 5-15: VLAN to Ports - Join VLAN 42 Figure 5-16: VLAN Management - GVRP 43 Figure 5-17: Statistics - RMON Statistics 44 Figure 5-.
WebView Switches Figure 5-44: Advanced Mode - New Class Map 65 Figure 5-45: Advanced Mode - New Aggregate Policer 66 Figure 5-46: Spanning Tree - STP Status 67 Figure 5-47: Spanning Tree - Global STP .
WebView Switches Figure 5-74: Admin - Memory Logs 92 Figure 5-75: Admin - Flash Logs 92 Figure C-1: Startup Menu 95 Figure C-1: Auto-Boot Message 95 Figure C-2: Send File 96 Figure C-3: Download 96.
1 Chapter 1: Introductio n Welcome WebView Switches Chapter 1: Introduction We l co m e This guide covers five product models. • SRW208 - 8-port 10/100 Ethernet Switch with WebView . Includes 8 10/100 RJ-45 ports. • SRW208G - 8-port 10/100 Ethernet Switch with WebView and Expansion Slots.
2 Chapter 1: Introductio n Welcome WebView Switches There are features that allow you to expand and grow your ne twork of switches. Link aggregation allows multiple high-bandwidth trunks between switches to be setup. This also provides a level of reliability in that the system continues to operate if one of the links break.
3 Chapter 1: Introductio n What’s in this User Guide? WebView Switches What’ s in this User Guide? This user guide covers the steps for setting up and using the Switch. • Chapter 1: Introduction This chapter describes the Switch’ s applications and this User Guide.
4 Chapter 2: Getting to Kn ow the Switch Overview WebView Switches Chapter 2: Getting to Know the Switch Overview The Switches differ in number and types of LEDs and ports. The front panel of each Switch is displayed on one of the following pages. The back panel is the same on all five models.
5 Chapter 2: Getting to Kn ow the Switch SRW208G - Front Panel WebView Switches Ports 1-8 The Switch is equipped with 8 auto-sensing, Ethernet network ports, which use RJ-45 connectors. The Fast Ethernet ports support network speeds of 10M bps or 100Mbps.
6 Chapter 2: Getting to Kn ow the Switch SRW208G - Front Panel WebView Switches Ports 1-8 The Switch is equipped with 8 auto-sensing, Ethernet network ports, which use RJ-45 connectors. The Fast Ethernet ports support network speeds of 10M bps or 100Mbps.
7 Chapter 2: Getting to Kn ow the Switch SRW208L - Front Panel WebView Switches SRW208L - Front P anel The Switch's LEDs and ports are located on the front panel. LEDs System Green. The SYSTEM LED lights up to indicate that the Switch is powered on.
8 Chapter 2: Getting to Kn ow the Switch SRW208P, SRW208MP - Front Panel WebView Switches G1 The mini-GBIC (gigabit interface converter) po rt is a connection point for a mini-GBIC expansion module , so the Switch can be uplinked via fiber to another switch.
9 Chapter 2: Getting to Kn ow the Switch SRW208P, SRW208MP - Front Panel WebView Switches Gigabit Orange. The Gi gabit LED lights up to indicate a Gigabit connection on the corresponding RJ-45 port (G1 through G2). Ports 1-8 The Switch is equipped with 8 auto-sensing, Ethernet network ports, which use RJ-45 connectors.
10 Chapter 2: Getting to Kn ow the Switch The Back Panel WebView Switches The Back P anel The power port is located on the back panel of the Switch. Po w e r The Po w e r port is where you will connect the power cord. NOTE: If you need to reset the Switch, unplug the power cord from the bac k of the Switch.
11 Chapter 3: Connecting the Switch Overview WebView Switches Chapter 3: Connecting the Switch Overview This chapter will explain how to connect network devices to the Switch. For an example of a typical network configuration, see the application diagram shown below .
12 Chapter 3: Connecting the Switch Before You Install the Switch... WebView Switches Before Y ou Install the Switch... When you choose a location for the Switch, observe the following guidelines: • Make sure that the Switch will be accessible and that the cables can be easily connected.
13 Chapter 3: Connecting the Switch Placement Options WebView Switches Rack-Mount Placement T o mount the Switch in any standard-sized, 19-inch wide , 1U high rack, follow these instructions: 1. Place the Switch on a hard flat surface with the front panel facing you.
14 Chapter 3: Connecting the Switch Placement Options WebView Switches Wall-Mount Placement When mounting the Switch on the wall, the Switch should be mounted horizontally . The fro nt panel should face either up or down (see Figure 3-4). The unit should no t be positioned vertically when mounted (see Figure 3-5).
15 Chapter 3: Connecting the Switch Connecting the Switch WebView Switches Connecting the Switch T o connect network devices to the Switch, follow these instructions: 1.
16 Chapter 4: Using the Console Interface for Co nfiguration Overview WebView Switches Chapter 4: Using the Console Interface for Configuration Overview The Switch features a menu-driven console interface for basic configuration of the Switch and management of your network.
17 Chapter 4: Using the Console Interface for Co nfiguration Connecting to the Switch through a Telnet Session WebView Switches 4. Set the serial port settings as follows: Bits per second: 38400 Data bits: 8 Parity: None Stop bits: 1 Flow control: None Then, click the OK button.
18 Chapter 4: Using the Console Interface for Co nfiguration Configuring the Switch through th e Console Interface WebView Switches Configuring the Switch th rough the Console Interface The console screens consist of a series of menus. Each menu has several options, which are listed vertically .
19 Chapter 4: Using the Console Interface for Co nfiguration Configuring the Switch through th e Console Interface WebView Switches System Configuration Menu On the System Configuration Menu screen, you have these choices: 1. System Information 2. Management Settings 3.
20 Chapter 4: Using the Console Interface for Co nfiguration Configuring the Switch through th e Console Interface WebView Switches System Information Using this screen, you can check the Switch’ s firmware versions and general system information.
21 Chapter 4: Using the Console Interface for Co nfiguration Configuring the Switch through th e Console Interface WebView Switches Management Settings From the Management Se ttings screen, you can set Serial Port Session Configuration, T elnet Session Configuration, or Secure T elnet (SSH) Configuratio n.
22 Chapter 4: Using the Console Interface for Co nfiguration Configuring the Switch through th e Console Interface WebView Switches SSH Configuration On the SSH Configuration screen, you can select SSH Server Configuration, SSH Server Status, SSH Cr ypto Key Generation, and SSH Keys Fingerprints.
23 Chapter 4: Using the Console Interface for Co nfiguration Configuring the Switch through th e Console Interface WebView Switches SSH Crypto Key Generation On the SSH Cryp to Key Generation screen, the SSH Public Key Algorithm can be toggled between RSA and DSA using the SP ACE bar to toggle the option.
24 Chapter 4: Using the Console Interface for Co nfiguration Configuring the Switch through th e Console Interface WebView Switches Username & Password Settings From this screen, you can administer the user names and passwords of those accessing the Switch.
25 Chapter 4: Using the Console Interface for Co nfiguration Configuring the Switch through th e Console Interface WebView Switches Show Certificate Use the Show Certificate screen to display the internal certificate.
26 Chapter 4: Using the Console Interface for Co nfiguration Configuring the Switch through th e Console Interface WebView Switches IP Address Configuration The Switch’ s IP information is displayed here. IP Address . The IP Address of the Switch is displayed.
27 Chapter 4: Using the Console Interface for Co nfiguration Configuring the Switch through th e Console Interface WebView Switches Network Configuration The Network Configuration screen offers a choice of two tests, Ping and T raceRoute . Ping The Ping screen displays the IP address of the location you want to contact.
28 Chapter 4: Using the Console Interface for Co nfiguration Configuring the Switch through th e Console Interface WebView Switches File Management The File Management screen allows you to upload or download files, such as the startup configuration, boot, or image file , using a TFTP ser ver .
29 Chapter 4: Using the Console Interface for Co nfiguration Configuring the Switch through th e Console Interface WebView Switches Port Status On the Switch Main Menu screen, select Po r t S t a t u s and press the Ent er key if you want to view the status information for the Switch’ s ports.
30 Chapter 5: Using the Web-b ased Utility for Config uration Overview WebView Switches Chapter 5: Using the W eb-based Utility for Configuration Overview This chapter describes the features included in the Web-based Utility .
31 Chapter 5: Using the Web-b ased Utility for Config uration Setup Tab - Summary WebView Switches Setup T ab - Summary The Summary screen provides device and system infor mation about the Switch . Device Information System Name . Displays the name for the Switch, if one has been entered on the Setup - Network Settings tab .
32 Chapter 5: Using the Web-b ased Utility for Config uration Setup Tab - Network Set tings WebView Switches PoE Information Maximum Available P ower . Indicates the maximum amount of power the device can supply . System Operation Status . Indicates whether the PoE function is on or off.
33 Chapter 5: Using the Web-b ased Utility for Config uration Setup Tab - Time WebView Switches Default Gatewa y . Enter the IP address of the Default Gate way . DNS Server . Enter the primary DNS Server infor mation. Click the Save Settings button to save your changes or click Cancel Changes to discard the information.
34 Chapter 5: Using the Web-b ased Utility for Config uration Port Management Tab - Port Settings WebView Switches From . If you selected Other for the Daylight Saving setting, then enter the date and time when daylight savings begins.
35 Chapter 5: Using the Web-b ased Utility for Config uration Port Management Tab - Port Settings WebView Switches Duplex . This is the port duplex mode, Full (transmission occurs in both directions simultaneously) or Half (transmission occurs in only one direction at a time).
36 Chapter 5: Using the Web-b ased Utility for Config uration Port Management Tab - Port Settings WebView Switches Auto Nego tiation . Y ou can enable or disable the port’s Auto Negotiation feature . If using an SFP module , Auto Negotiation for the specific port should be set to Disable .
37 Chapter 5: Using the Web-b ased Utility for Config uration Port Management Tab - L ink Aggregation WebView Switches P ort Management T ab - Link Aggregation LAG . This indicates if the port is part of a LAG. Description . Description for this LAG. Admin Statu s .
38 Chapter 5: Using the Web-b ased Utility for Config uration Port Management Tab - LACP WebView Switches Admin Auto Ne got iat ion . Enables or disables Auto Negotia tion on the LAG.
39 Chapter 5: Using the Web-b ased Utility for Config uration Port Management Tab - PoE Power Settings WebView Switches P ort Management T ab - P oE P ower Settings Po r t . Displays the selected port’s number . Admin Statu s. Indicates wheth er PoE is enabled or disabled on the port.
40 Chapter 5: Using the Web-b ased Utility for Config uration VLAN Manageme nt Tab - Port Settings WebView Switches VLAN Management T ab - P ort Settings The VLAN Port Settings screen provides parameters fo r managing ports that are part of a VLAN. The port default VLAN ID (PVID) is configured on the VLAN Port Settings screen.
41 Chapter 5: Using the Web-b ased Utility for Config uration VLAN Manageme nt Tab - Ports to VLAN WebView Switches VLAN Management T ab - P orts to VLAN The Ports to VLAN screen contains fields for configuring ports to a VLAN. The port def ault VLAN ID (PVID) is configured on the Create VLAN screen.
42 Chapter 5: Using the Web-b ased Utility for Config uration VLAN Managem ent Tab - VLAN to Ports WebView Switches VLAN Management T ab - VLAN to P orts The VLAN to Ports screen contains fields for configuring VLANs to a ports. Interface. Displays the interface number .
43 Chapter 5: Using the Web-b ased Utility for Config uration VLAN Managem ent Tab - GVRP WebView Switches VLAN Management T ab - GVRP GARP VLAN Registration Protocol (GVRP) is specific ally provided for automatic distribution of VLAN membership information among VLAN-aware bridges.
44 Chapter 5: Using the Web-b ased Utility for Config uration Statistics Tab - RMON Statistics WebView Switches Refresh Rate. Defines th e amount of time that passes before the interface statistics are refreshed. The possible field values are: • No Refresh.
45 Chapter 5: Using the Web-b ased Utility for Config uration Statistics Tab - RMON History WebView Switches Collisions. Displays the nu mber of collisions received on the interface since the device was last refreshed. Frames of xx Bytes. Number of xx-byte frames received on the interface since the device was last refreshed.
46 Chapter 5: Using the Web-b ased Utility for Config uration Statistics Tab - RMON History WebView Switches RMON Histor y The RMON History screen contains interface specific st atistical network sam plings. Each table entry represents all counter values compiled during a single sample .
47 Chapter 5: Using the Web-b ased Utility for Config uration Statistics Tab - RMON Alarm WebView Switches Jabbers. Displays the total number of received packets that were longer than 1518 octets.
48 Chapter 5: Using the Web-b ased Utility for Config uration Statistics Tab - RMON Events WebView Switches • Both. Indicates that both th e Log and T rap mechanism are used to report alarms. Falling Threshold. Displays the falling counter value that triggers the falling threshold alarm.
49 Chapter 5: Using the Web-b ased Utility for Config uration Statistics Tab - Port Utilization WebView Switches • None. Indicates that no event occurred. • Log. Indicates that the event is a log entry . • T rap. Indicates that the event is a trap.
50 Chapter 5: Using the Web-b ased Utility for Config uration Statistics Tab - 802.1x Statistics WebView Switches Statistics T ab - 802.1x Statistics The 802.1X Statistic screen contains information about EAP packets received on a specific port. Po r t .
51 Chapter 5: Using the Web-b ased Utility for Config uration ACL Tab - IP Based ACL WebView Switches • 30 Sec. Indicates that the GVRP statistics are refreshed ever y 30 seconds. • 60 Sec. Indicates that the GVRP statistics are refreshed ever y 60 seconds.
52 Chapter 5: Using the Web-b ased Utility for Config uration ACL Tab - IP Based ACL WebView Switches Action. Indicates the action assigned to the packet matching the ACL.
53 Chapter 5: Using the Web-b ased Utility for Config uration ACL Tab - IP Based ACL WebView Switches Urg. Indicates the packet is urgent. Ack. Indicates the packet is acknowledged. Psh. Indicates the packet is pushed. Rst. Indicates the connection is d ropped.
54 Chapter 5: Using the Web-b ased Utility for Config uration ACL Tab - MAC Based ACL WebView Switches A CL T ab - MA C Based A CL The MAC Based ACL screen allows a MAC based ACL to be defined. ACEs can be added only if the ACL is not bound to an interface .
55 Chapter 5: Using the Web-b ased Utility for Config uration Security Tab - ACL Binding WebView Switches Security T ab - A CL Binding When an ACL is bound to an interface , all the ACE rule s that have been defined are applied to the selected interface .
56 Chapter 5: Using the Web-b ased Utility for Config uration Security Tab - TACACS+ WebView Switches Dead Time. Defines the amount of time (minutes) that a RADIUS ser ver is bypassed for ser vice requests. The range is 0-2000. The Dead Time default is 0 minutes.
57 Chapter 5: Using the Web-b ased Utility for Config uration Security Tab - 802.1x Settings WebView Switches Timeo ut for Reply . Displays the amount of time that passes before the connection between the device and the T ACACS+ server times out. The field range is 1-30 se conds.
58 Chapter 5: Using the Web-b ased Utility for Config uration Security Tab - Port Security WebView Switches Reauthentication P eriod. Specifies the number of seconds in which the selected port is reauthenticated (Range: 300-4294967295). The field default is 3600 seconds.
59 Chapter 5: Using the Web-b ased Utility for Config uration Security Tab - Multiple Host s WebView Switches Interface. Displays the port or LAG name . Lock Interface. Selecting this option locks the specified interface . Learning Mode. Defines the lock ed port type .
60 Chapter 5: Using the Web-b ased Utility for Config uration Security Tab - Storm Control WebView Switches Enable Multip le Hosts. When checked, indicates that multiple hosts are enabled. Multiple hosts must be enabled in order to either disable the ingress-filter , or to use port-lock security on the selected port.
61 Chapter 5: Using the Web-b ased Utility for Config uration QoS WebView Switches QoS Network traffic is usually unpredictable , and the only basic assurance tha t can be offered is best effort traffic delivery . T o overcome this challenge , Quality of Service (QoS) is applied throughout the network.
62 Chapter 5: Using the Web-b ased Utility for Config uration QoS Tab - Queue Settings WebView Switches CoS Mode. Indicates if QoS is ena bled on the interface . The possible values are: • Disable. Disables QoS on the interface . • Basic. Enables QoS on the interface.
63 Chapter 5: Using the Web-b ased Utility for Config uration QoS Tab - DSCP Settin gs WebView Switches QoS T ab - DSCP Settings The DSCP Settings screen enables mapping DSCP values to specific queues. The DSCP Settings screen contains the following fields: DSCP .
64 Chapter 5: Using the Web-b ased Utility for Config uration QoS Tab - Basic Mode WebView Switches QoS T ab - Basic Mode The Basic Mode screen contains the following fields: T rust Mode.
65 Chapter 5: Using the Web-b ased Utility for Config uration QoS Tab - Advanced Mode WebView Switches Add to List. The Add to List button will add the policy to the Policy Name table . Select P olic y . Selects an existing Policy by name . The Policy can be comprised of: • Class Map • Action • Policer New P olicy Name.
66 Chapter 5: Using the Web-b ased Utility for Config uration Spanning Tree WebView Switches Aggregate P olicer . Configures the class to use a configured aggregate policer selected from the drop-down menu. An aggregate policer is defined if the policer is shar ed with multiple classes.
67 Chapter 5: Using the Web-b ased Utility for Config uration Spanning Tree Tab - STP Status WebView Switches • Rapid STP . Detects and uses network topologies that provide faster convergence of the spanning tree , without creating forwarding loops.
68 Chapter 5: Using the Web-b ased Utility for Config uration Spanning Tree Tab - Globa l STP WebView Switches Spanning T r ee T ab - Global STP The Global STP screen contains parameters for enabling STP on the device. Global Setting Spanning T ree State.
69 Chapter 5: Using the Web-b ased Utility for Config uration Spanning Tree Tab - STP Port Settings WebView Switches Max Age. Specifies the device Maximum Age Time . The Max imum Age Time indicates the amount of time in seconds a bridge waits before sending configuration messages.
70 Chapter 5: Using the Web-b ased Utility for Config uration Spanning Tree Tab - RSTP Port Setting s WebView Switches Pa t h C o s t . In dicates the port contribution to the root path cost. The path cost is adjusted to a highe r or lower value , and is used to forward traffic when a path being rerouted.
71 Chapter 5: Using the Web-b ased Utility for Config uration Spanning Tree Tab - RSTP Port Setting s WebView Switches Mode. Indicates the current Spanning T ree mode . The Spanning T ree mode is selected in the Global STP screen. The possible field values are: • Classic STP .
72 Chapter 5: Using the Web-b ased Utility for Config uration Spanning Tree Tab - MSTP Properties WebView Switches Spanning T r ee T ab - MSTP Properties MSTP provides differing load balancing scenarios. For example , while port A is blocked in one STP instance, the same port is placed in the Forwarding State in another STP instance.
73 Chapter 5: Using the Web-b ased Utility for Config uration Spanning Tree Tab - MSTP Interface Settin gs WebView Switches Root P a th Co st. In dicates the selected instance’ s path cost. Bridge ID. Indicates the bridge ID of the selected instance .
74 Chapter 5: Using the Web-b ased Utility for Config uration Multicast Tab - IGMP Snooping WebView Switches • Backup. Provides a backup path to the designated port pat h toward the Spanning T ree leaves. Backup ports occur only when two ports are connected in a loop by a point-to-point link.
75 Chapter 5: Using the Web-b ased Utility for Config uration Multicast Tab - IGMP Snooping WebView Switches • Which routing protocols are forwarding packets and Multicast traffic? Ports requesting to join a specific Multicast group issue an IGMP report, specifying that Multicast gr oup is accepting members.
76 Chapter 5: Using the Web-b ased Utility for Config uration Multicast Tab - Bridge Multicast WebView Switches Multicast T ab - Bridge Multicast The Bridge Multicast screen displays the ports and LAGs at tached to the Multicast ser vice group in the Ports and LAGs tables.
77 Chapter 5: Using the Web-b ased Utility for Config uration Multicast Tab - Bridge Multicast Forward All WebView Switches Multicast T ab - Bridge Multicast Forw ard All The Bridge Multicast Forward All screen contains fields for at taching ports or LAGs to a device that is attached to a neighboring Multicast router/switch.
78 Chapter 5: Using the Web-b ased Utility for Config uration SNMP Tab - Views WebView Switches SNMP Notifications. Indicates if the device can send SNMP notifications. Authentication Notifications. Indicates if SNMP Authentication failure notification is enabled on the device.
79 Chapter 5: Using the Web-b ased Utility for Config uration SNMP Tab - Group Profile WebView Switches • SNMPv3. SNMPv3 is defined for the group. Security Level. Defines the security level attached to the group. Security levels apply to SNMPv3 only .
80 Chapter 5: Using the Web-b ased Utility for Config uration SNMP Tab - Group Membership WebView Switches SNMP T ab - Gr oup Membership The Group Membership screen provides information for assigning SNMP access con trol privileges to SNMP groups. User name.
81 Chapter 5: Using the Web-b ased Utility for Config uration SNMP Tab - Communities WebView Switches The Add to List button adds the Group Membership configuration to the respective table at the botto m of the screen. SNMP T ab - Communities The Communities screen contains three areas, Communities, Basic T able and Advanced T able .
82 Chapter 5: Using the Web-b ased Utility for Config uration SNMP Tab - Notification Filter WebView Switches Community String — Displays the password used to authenticate the management station to the de vice . Access Mode — Displays the access rights of the community .
83 Chapter 5: Using the Web-b ased Utility for Config uration SNMP Tab - Notification Recipient WebView Switches SNMP T ab - Notification Recipient The Notification Recipient screen contains information for defining filters that deter mine whether traps are sent to specific users, and the trap type sent.
84 Chapter 5: Using the Web-b ased Utility for Config uration Admin Tab - User Authenti cation WebView Switches • Authenticatio n. Indicates the packet is authenticated. • Privacy . Indicates the packet is both authenticated and encr ypted. UDP Port.
85 Chapter 5: Using the Web-b ased Utility for Config uration Admin Tab - Static Address WebView Switches Admin T ab - Static Addr ess A static address can be assigned to a specific interface on this switch. Static addresses are bound to the assigned interface and cannot be moved.
86 Chapter 5: Using the Web-b ased Utility for Config uration Admin Tab - Dynamic A ddress WebView Switches Admin T ab - Dynamic Addr ess The Dynamic Address T able contains the MAC addresses learne d by monitoring the source address for traffic entering the switch.
87 Chapter 5: Using the Web-b ased Utility for Config uration Admin Tab - Lo gging WebView Switches Admin T ab - Logging The System Logs enable viewing device events in real time, and r eco rding the events for later usage. System Logs record and manage events and report errors or informational messages.
88 Chapter 5: Using the Web-b ased Utility for Config uration Admin Tab - Port Mirroring WebView Switches Admin T ab - P ort Mirroring Port mirroring monitors and mirrors network traffic by forwarding copies of incoming and outgoing packets from one port to a monitoring port.
89 Chapter 5: Using the Web-b ased Utility for Config uration Admin Tab - Save Configuration WebView Switches Admin T ab - Sa ve Configuration Via TFTP After you download a new image file, the device should be rebooted. If you are downloading a new boot image , please follow these steps: 1.
90 Chapter 5: Using the Web-b ased Utility for Config uration Admin Tab - Firmware U pgrade WebView Switches Admin T ab - Firmwar e Upgrade The Firmware Upgrade screen contains the following fields: via TFTP . Defines the upgrade through a TFTP Ser ver .
91 Chapter 5: Using the Web-b ased Utility for Config uration Admin Tab - Factory De faults WebView Switches Admin T ab - Factory Defaults The Factory Reset screen allows network managers to reset the device to the factor y defaults shipped with the switch.
92 Chapter 5: Using the Web-b ased Utility for Config uration Admin Tab - Memory Lo gs WebView Switches Admin T ab - Memory Logs The Memory Log screen contains all system logs in a chronological order that are saved in RAM (Cache). Log Index. Displays the log number .
93 Appendix A: About Gig abit Ethernet and Fiber Opt i c Cabling Gigabit Ethernet WebView Switches Appendix A: About Gigabit Ethernet and Fiber Optic Cabling Gigabit Ethernet Gigabit Ethernet runs at .
94 Appendi x B: Windows He lp WebView Switches Appendix B: Windows Help Almost all networking products require Microsoft Windows. Windows is the most used operating system in the world and comes with many features that help make networking easier . These features can be accessed through Windows Help and are described in this appendix.
95 Appendix C: Downloading u sing Xmodem Startup Menu Procedures WebView Switches Appendix C: Downloading using Xmodem Startup Menu Procedur es The Startup menu can be entered when booting the device . There is a two second window of time to enter the Startup Menu immediately after the POST test.
96 Appendix C: Downloading u sing Xmodem Startup Menu Procedures WebView Switches 7. Select Send File from the T ransfer pull-down menu. 8. In the F ilename: field, enter the file path for the file to be downloaded or click Browse to locate the file .
97 Appendix D: Glossary WebView Switches Appendix D: Glossar y This glossary contains som e basic networking terms you may come across when using this product. Fo r more advanced terms, see the complete Linksys glossary at http://www .linksys.com/glossar y .
98 Appendix D: Glossary WebView Switches Bandwidth - Th e transmission capacity of a given device or network. Bandwidth Assign men ts - Indicates the amo unt of bandwidth assigned to a specific application, user , and/or interface . Baud - Indicates the number of signaling elements transmitted each second.
99 Appendix D: Glossary WebView Switches Combo Ports - A single logical port with two physical connections, including an RJ-45 connection and a SFP connection. Communiti es - Specifies a group of users which retain the same system access rights. CoS ( C lass o f S ervice) - The 802.
100 Appendix D: Glossary WebView Switches Flow Control - Enables lower speed devices to communicate with higher speed de vices. This is implemented by the higher speed device refraining from sending packets. FTP ( F ile T ransfer P rotocol) - A protocol used to transfer files over a TCP/IP network.
101 Appendix D: Glossary WebView Switches LAN - The computers and networking products that make up your local network. MAC ( M edia A ccess C ontrol) Address - Th e unique address that a manufacturer assigns to each networking device . Mask - A filter that includes or excludes certain values, for example parts of an IP address.
102 Appendix D: Glossary WebView Switches QoS ( Q uality o f S er vice) -Provides policies that contain sets of filters (rules). QoS allows network managers to decide how and what network traffic is forwarded according to priorities, application types, and source and destination addresses.
103 Appendix D: Glossary WebView Switches T A CACS+ ( T er minal A ccess C ontroller A ccess C ontrol S ystem Plus ) - Proprietar y Cisco enhancement to T erminal Access Controller Access Control Syst em (T ACACS). Provides additional suppor t for authentication, authorizatio n, and accounting.
104 Appendix E: Specifications SRW208 WebView Switches Appendix E: Specifications SRW208 Ports 8 RJ-45 connectors for 10BASE-T and 100BASE-TX Console port Auto MDI/MDI-X Autonegotiate/Manual setting Cabling T ype UTP CA T 5 or better for 10BASE-T/100BASE-TX LEDs 10/100 Link/Act, Speed, System P erformance Switching Capacity 1.
105 Appendix E: Specifications SRW208 WebView Switches Management Web User Interface Built-in Web UI for ea sy browser -based configuration (HTTP/HTTPS) SNMP SNMP version 1,2c ,3 with support for traps.
106 Appendix E: Specifications SRW208 WebView Switches Security IEEE 802.1x 802.1x - RADIUS Authentication. MD5 Encryption Access Control ACLs - Drop or Rate Limit based on: Source and Destin ation MA.
107 Appendix E: Specifications SRW208 WebView Switches TCP/UDP port based Diffser v Classification and Remarking ACLs Rate Limiting Ingress policer Egress rate control Standards 802.3 10BASE-T Ethernet, 802.3u 100BASE-TX Fast Ethernet, 802.3ab, 802.3x Flo w Control, 802.
108 Appendix E: Specifications SRW208G WebView Switches SRW208G Ports 8 RJ-45 connectors for 10BASE-T and 100BASE-TX, 1 RJ-45 connectors for 10BASE-T/100BASE-TX/1000BASE-T , and 1 miniGBIC/SFP port Co.
109 Appendix E: Specifications SRW208G WebView Switches SNMP MIBs RFC1213 MIB-2, RFC2863 In terface MIB , RFC2665 Ether -like MIB , RFC1493 Bridge MIB , RFC2674 Extended Bridge MIB (P-bridge , Q-bridg.
110 Appendix E: Specifications SRW208G WebView Switches Protocol TO S / D S C P Port VLAN Ethertype A vailability Link Aggregation Link Aggr egation using IEEE 802.3ad LACP Up to 8 ports in up to 8 groups Storm Control Broadcast, Muti cast and Unknown Unicast Spanning T ree IEEE 802.
111 Appendix E: Specifications SRW208G WebView Switches Standards 802.3 10BASE-T Ethernet, 802.3u 100BAS E-TX Fast Ether net, 802.3ab 1000BASE-T Gig abit Ether net, 802.3z Gigabit Ether net , 802.3x Flow Control, 802.3 ad LACP , 802.1D STP , 802.1Q/p VLAN, 802.
112 Appendix E: Specifications SRW208L WebView Switches SRW208L Ports 8 RJ-45 connectors for 10/100BASE-TX, 1 mini GBIC/SFP port, and 1 LC type connector for 100LX SMF port at 1310nm Console port Auto.
113 Appendix E: Specifications SRW208L WebView Switches SNMP MIBs RFC1213 MIB-2, RFC2863 In terface MIB , RFC2665 Ether -like MIB , RFC1493 Bridge MIB , RFC2674 Extended Bridge MIB (P -bridge , Q-brid.
114 Appendix E: Specifications SRW208L WebView Switches TO S / D S C P Port VLAN Ethertype A vailability Link Aggregation Link Aggr egation using IEEE 802.3ad LACP Up to 8 ports in up to 8 groups Storm Control Broadcast, Muti cast and Unknown Unicast Spanning T ree IEEE 802.
115 Appendix E: Specifications SRW208L WebView Switches Standards 802.3 10BASE-T Ethernet, 802.3u 100BAS E-TX Fast Ether net, 802.3ab 1000BASE-T Gig abit Ether net, 802.3z Gigabit Ether net , 802.3x Flow Control, 802.3 ad LACP , 802.1D STP , 802.1Q/p VLAN, 802.
116 Appendix E: Specifications SRW208MP WebView Switches SRW208MP Ports 8 RJ-45 connectors for 10BASE-T and 100BASE-T X, 2 RJ-45 connectors for 10BASE-T/100BASE-TX/1000BASE-T with 2 SFP slots Console .
117 Appendix E: Specifications SRW208MP WebView Switches Management Web User Interface Built-in Web UI for ea sy browser -based configuration (HTTP/HTTPS) SNMP SNMP versio n 1, 2c , 3 with support for.
118 Appendix E: Specifications SRW208MP WebView Switches Security IEEE 802.1x 802.1x - RADIUS Authentication. MD5 Encryption Access Control ACLs - Drop or Rate Limit based on: Source and Destin ation .
119 Appendix E: Specifications SRW208MP WebView Switches Diffser v Classification and Remarking ACLs Rate Limiting Ingress policer Egress rate control Standards 802.3 10BASE-T Ethernet, 802.3u 100BAS E-TX Fast Ether net, 802.3ab 1000BASE-T Gig abit Ether net, 802.
120 Appendix E: Specifications SRW208P WebView Switches SRW208P Ports 8 RJ-45 connectors for 10BASE-T and 100BASE-T X, 2 RJ-45 connectors for 10BASE-T/100BASE-TX/1000BASE-T with 2 SFP slots Console po.
121 Appendix E: Specifications SRW208P WebView Switches SNMP SNMP versio n 1, 2c , 3 with support for traps SNMP MIBs RFC1213 MIB-2, RFC2863 In terface MIB , RFC2665 Ether -like MIB , RFC1493 Bridge M.
122 Appendix E: Specifications SRW208P WebView Switches Source and Destin ation IP address Protocol TO S / D S C P Port VLAN Ethertype A vailability Link Aggregation Link Aggr egation using IEEE 802.3ad LACP Up to 8 ports in up to 8 groups Storm Control Broadcast, Mult icast and Unknown Unicast Spanning T ree IEEE 802.
123 Appendix E: Specifications SRW208P WebView Switches Standards 802.3 10BASE-T Ethernet, 802.3u 100BAS E-TX Fast Ether net, 802.3ab 1000BASE-T Gig abit Ether net, 802.3z Gigabit Ether net , 802.3x Flow Control, 802.3 ad LACP ,802.3af POE, 8 02.1D STP , 802.
124 Appendix F: Warranty Information WebView Switches Appendix F: W arranty Information LIMITED W ARRANTY Linksys warrants to Y ou that, for a period of five years (the “Warranty Period”), your Linksys Product will be substantially free of defects in materials and workmanship under normal use.
125 Appendix G: Regulatory Informatio n WebView Switches Appendix G: Regulator y Information FCC Statement This product has been tested and complies with the specification s for a Class B digital device, pursuant to Part 15 of the FCC Rules.
126 Appendix G: Regulatory Informatio n WebView Switches Règlement d’Industr y Canada Le fonctionnement est soumis aux conditions suivantes : 1. Ce périphérique ne doit pas causer d'interférences; 2.
127 Appendix G: Regulatory Informatio n WebView Switches.
128 Appendix G: Regulatory Informatio n WebView Switches.
129 Appendix G: Regulatory Informatio n WebView Switches.
130 Appendix G: Regulatory Informatio n WebView Switches For more information, visit www .linksys.com..
131 Appendix H: Contact Inf ormation WebView Switches Appendix H: Contact Information Need to contact Linksys? Visit us online for information on the latest products and updates to your existing products at: http://www .
Ein wichtiger Punkt beim Kauf des Geräts Linksys SRW208 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Linksys SRW208 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Linksys SRW208 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Linksys SRW208 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Linksys SRW208 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Linksys SRW208 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Linksys SRW208 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Linksys SRW208. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Linksys SRW208 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
