Benutzeranleitung / Produktwartung MKX (2014) des Produzenten Lincoln
Zur Seite of 450
October 2013 First Printing Owner’s Manual Lincoln MKX Litho in U.S.A. EA1J 19A321 AA Owner’ s M anual 201 4 MKX Owner’ s M anual 201 4 MKX lincolnowner.
Introduction 9 Child Safety 17 Child seat positioning ................................... 1 9 Booster seats ......................................... 2 1 Installing child seats .................................... 2 4 Child safety locks ..............
MyKey 63 Settings, MyKey ....................................... 6 3 Creating ............................................. 6 4 C l e a r i n g ............................................. 6 5 System status ......................................... 6 5 Remote start, MyKey .
Windows and Mirrors 94 Power windows ....................................... 9 4 E x t e r i o rm i r r o r s ....................................... 9 6 Interior mirrors ....................................... 9 8 Sun visors .........................
Starting and Stopping the Engine 145 Engine block heater ................................... 1 4 9 Fuel and Refueling 151 Fuel quality ......................................... 1 5 2 Running out of fuel .................................... 1 5 3 R e f u e l i n g .
Driving Aids 194 Blind Spot Information System (BLIS) with Cross T raffic Alert ( C T A ) ............................................. 1 9 4 Collision warning system ................................ 1 9 9 Steering ....................................
Maintenance 249 General information ................................... 2 4 9 Opening and closing the hood ............................ 2 5 0 Under hood overview .................................. 2 5 1 Engine oil dipstick ............................
Wheels and Tires 282 T ire care ........................................... 2 8 4 Using snow chains .................................... 2 9 9 T ire Pressure Monitoring System (TPMS) ................... 3 0 0 Changing a road wheel ....................
Appendices 408 Scheduled Maintenance 426 Normal scheduled maintenance and log ..................... 4 3 1 Index 443 The information contained in this publication was correct at the time of going to print.
ABOUT THIS MANUAL Thank you for choosing Ford. W e recommend that you take some time to get to know your vehicle by reading this manual. The more that you know about it, the greater the safety and pleasure you will get from driving it.
SYMBOL GLOSSAR Y W ARNING: Y ou risk death or serious injury to yourself and others if you do not follow the instruction highlighted by the warning symbol.
Symbol Description Symbol Description Symbol Description Fuel pump reset Fuse compartment Hazard warning flasher Heated rear window Interior luggage compartment release Jack Lighting control Low tire .
DA T A RECORDING Service Data Recording Service data recorders in your vehicle are capable of collecting and storing diagnostic information about your vehicle. This potentially includes information about the performance or status of various systems and modules in the vehicle, such as engine, throttle, steering or brake systems.
Note: EDR data is recorded by your vehicle only if a non-trivial crash situation occurs; no data is recorded by the EDR under normal driving conditions and no personal data or information (e.g., name, gender , age, and crash location) is recorded (see limitations regarding 911 Assist and T raffic, Directions and Information privacy below).
not want Ford or its vendors to receive this information, do not activate the service. Ford Motor Company and the vendors it uses to provide you with this information do not store your vehicle travel information. For more information, see T raffic, Directions and Information, T erms and Conditions.
Scheduled Maintenance and Mechanical Repairs One of the best ways for you to make sure that your vehicle provides years of service is to have it maintained in line with our recommendations using parts that conform to the specifications detailed in this owner’ s manual.
MOBILE COMMUNICA TIONS EQUIPMENT Using mobile communications equipment is becoming increasingly important in the conduct of business and personal affairs.
GENERAL INFORMA TION See the following sections for directions on how to properly use safety restraints for children. W ARNING: Always make sure your child is secured properly in a device that is appropriate for their height, age and weight. Child safety restraints must be bought separately from your vehicle.
Recommendations for Safety Restraints for Children Child size, height, weight, or age Recommended restraint type Infants or toddlers Children weighing 40 lb (18 kg) or less (generally age four or younger). Use a child safety seat (sometimes called an infant carrier , convertible seat, or toddler seat).
CHILD SEA T POSITIONING W ARNING: Airbags can kill or injure a child in a child seat. Never place a rear -facing child seat in front of an active airbag. If you must use a forward-facing child seat in the front seat, move the vehicle seat upon which the child seat is installed all the way back.
W ARNING: Never place, or allow a child to place, the shoulder belt under a child’ s arm or behind the back because it reduces the protection for the upper part of the body and may increase the risk of injury or death in a crash. W ARNING: T o avoid risk of injury , do not leave children or pets unattended in your vehicle.
BOOSTER SEA TS W ARNING: Never place, or allow a child to place, the shoulder belt under a child’ s arm or behind the back because it reduces the protection for the upper part of the body and may increase the risk of injury or death in a crash.
T ypes of Booster Seats • Backless booster seats If your backless booster seat has a removable shield, remove the shield. If a vehicle seating position has a low seat back or no head restraint, a backless booster seat may place your child’ s head (as measured at the tops of the ears) above the top of the seat.
Children and booster seats vary in size and shape. Choose a booster that keeps the lap belt low and snug across the hips, never up across the stomach, and lets you adjust the shoulder belt to cross the chest and rest snugly near the center of the shoulder .
INST ALLING CHILD SEA TS Child Seats Use a child safety seat (sometimes called an infant carrier , convertible seat, or toddler seat) for infants, toddlers or children weighing 40 pounds (18 kilograms) or less (generally age four or younger). Using Lap and Shoulder Belts W ARNING: Airbags can kill or injure a child in a child seat.
• Keep the buckle release button pointing up and away from the safety seat, with the tongue between the child seat and the release button, to prevent accidental unbuckling. • Place the vehicle seat upon which the child seat will be installed in the upright position.
3. While holding the shoulder and lap belt portions together , route the tongue through the child seat according to the child seat manufacturer’ s instructions.
8. Remove remaining slack from the belt. Force the seat down with extra weight, for example, by pressing down or kneeling on the child restraint while pulling up on the shoulder belt in order to force slack from the belt.
Using Lower Anchors and T ethers for CHildren (LA TCH) W ARNING: Never attach two child safety seats to the same anchor . In a crash, one anchor may not be strong enough to hold two child safety seat attachments and may break, causing serious injury or death.
The LA TCH anchors are located at the rear section of the rear seat between the cushion and seatback below the symbols as shown. Follow the child seat manufacturer’ s instructions to properly install a child seat with LA TCH attachments. Follow the instructions on attaching child safety seats with tether straps.
Combining Safety Belt and LA TCH Lower Anchors for Attaching Child Safety Seats When used in combination, either the safety belt or the LA TCH lower anchors may be attached first, provided a proper installation is achieved. Attach the tether strap afterward, if included with the child seat.
2. Locate the correct anchor behind the gap cover for the selected seating position. 3. Pull the gap cover to expose the anchors. Clip the tether strap to the anchor as shown. 4. T ighten the child safety seat tether strap according to the manufacturer’ s instructions.
CHILD SAFETY LOCKS The childproof locks are located on the rear edge of each rear door and must be set separately for each door . When these locks are set, the rear doors cannot be opened from the inside. • Insert the key and turn to the lock position (key horizontal) to engage the childproof locks.
PRINCIPLES OF OPERA TION W ARNING: Never let a passenger hold a child on his or her lap while your vehicle is moving. The passenger cannot protect the child from injury in a crash. W ARNING: It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle.
W ARNING: When possible, all children 12 years old and under should be properly restrained in a rear seating position. Failure to follow this could seriously increase the risk of injury or death. W ARNING: Safety belts and seats can become hot in a vehicle that has been closed up in sunny weather; they could burn a small child.
F ASTENING THE SAFETY BEL TS The front outboard and rear safety restraints in your vehicle are combination lap and shoulder belts. 1. Insert the belt tongue into the proper buckle (the buckle closest to the direction the tongue is coming from) until you hear a snap and feel it latch.
T o adjust the comfort guide: 1. Slip the shoulder belt into the belt guide. 2. Slide the guide up or down along the webbing so that the belt is centered on the occupant’ s shoulder . Restraint of Pregnant Women W ARNING: Always ride and drive with your seatback upright and the safety belt properly fastened.
W ARNING: The belt and retractor assembly must be replaced if the safety belt assembly automatic locking retractor feature or any other safety belt function is not operating properly when checked by an authorized dealer . Failure to replace the belt and retractor assembly could increase the risk of injury in crashes.
How to Use the Automatic Locking Mode 1. Buckle the combination lap and shoulder belt. 2. Grasp the shoulder portion and pull downward until the entire belt is pulled out. 3. Allow the belt to retract. As the belt retracts, you will hear a clicking sound.
SAFETY BEL T HEIGHT ADJUSTMENT W ARNING: Position the safety belt height adjusters so that the belt rests across the middle of your shoulder . Failure to adjust the safety belt properly could reduce the effectiveness of the seat belt and increase the risk of injury in a crash.
SAFETY BEL T -MINDER® This feature supplements the safety belt warning function by providing additional reminders by intermittently sounding a chime and illuminating the safety belt warning light when the driver’ s or front passenger’ s seat is occupied and the safety belt is unbuckled.
Deactivating and Activating the Belt-Minder® Feature W ARNING: While the system allows you to deactivate it, this system is designed to improve your chances of being safely belted and surviving an accident. W e recommend you leave the system activated for yourself and others who may use the vehicle.
One-time Belt-Minder® Disable If at any time the driver or front passenger quickly buckles then unbuckles the safety belt for that seating position, the system is disabled for the current ignition cycle. The feature will enable during the same ignition cycle if the occupant buckles and remains buckled for about 30 seconds.
PERSONAL SAFETY SYSTEM™ The Personal Safety System provides an improved overall level of frontal crash protection to front seat occupants and is designed to help further reduce the risk of airbag-related injuries.
PRINCIPLES OF OPERA TION W ARNING: Airbags do not inflate slowly or gently , and the risk of injury from a deploying airbag is the greatest close to the trim covering the airbag module.
The airbags are a supplemental restraint system and are designed to work with the safety belts to help protect the driver and right front passenger from certain upper body injuries. Airbags do not inflate slowly; there is a risk of injury from a deploying airbag.
DRIVER AND P ASSENGER AIRBAGS W ARNING: Never place your arm or any objects over an airbag module. Placing your arm over a deploying airbag can result in serious arm fractures or other injuries. Objects placed on or over the airbag inflation area may cause those objects to be propelled by the airbag into your face and torso causing serious injury .
Proper Driver and Front Passenger Seating Adjustment W ARNING: The National Highway T raffic Safety Administration recommends a minimum distance of at least 10 inches (25 centimeters) between an occupant’ s chest and the driver airbag module. Failure to follow this could seriously increase the risk of injury or death.
FRONT P ASSENGER SENSING SYSTEM W ARNING: Even with Advanced Restraints Systems, children 12 and under should be properly restrained in a rear seating position.
The front passenger sensing system uses a passenger airbag status indicator which will illuminate indicating that the front passenger frontal airbag is either ON (enabled) or OFF (disabled). The indicator lamp is located in the center stack of the instrument panel.
• Restart the vehicle and have the person remain in this position for about two minutes. This will allow the system to detect that person and enable the passenger’ s frontal airbag. • If the indicator OFF lamp remains lit even after this, the person should be advised to ride in the rear seat.
The conditions listed above may cause the weight of a properly seated occupant to be incorrectly interpreted by the front passenger sensing system. The person in the front passenger seat may appear heavier or lighter due to the conditions described in the previous list.
SIDE AIRBAGS W ARNING: Do not place objects or mount equipment on or near the airbag cover , on the side of the seatbacks (of the front seats), or in front seat areas that may come into contact with a deploying airbag. Failure to follow these instructions may increase the risk of personal injury in the event of a crash.
The system consists of the following: • A fabric tag or embossed letters in the plastic trim on the seat with the word AIRBAG. • Side airbags located inside the seatback of the driver and front passenger seats. • Crash sensors and monitoring system with readiness indicator .
W ARNING: All occupants of your vehicle including the driver should always wear their safety belts even when an airbag supplemental restraint system and curtain airbag is provided. Failure to properly wear your safety belt could seriously increase the risk of injury or death.
Children 12 years old and under should always be properly restrained in the rear seats. The Safety Canopy will not interfere with children restrained using a properly installed child or booster seat because it is designed to inflate downward from the headliner above the doors along the side window opening.
If any of these things happen, even intermittently , have the supplemental restraint system serviced at an authorized dealer immediately . Unless serviced, the system may not function properly in the event of a crash.
GENERAL INFORMA TION ON RADIO FREQUENCIES This device complies with part 15 of the FCC Rules and with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditio.
REMOTE CONTROL Intelligent Access Key Y our intelligent access keys operate the power locks and the remote start system. The key must be in your vehicle to activate the push-button start system. The intelligent access key also contains a removable mechanical key blade that you can use to unlock the driver door .
Intelligent Access Transmitter 1. Remove the backup key from the transmitter . 2. T wist a thin coin under the tab hidden behind the backup key head to remove the battery cover . Do not use the backup key to remove the cover or you could damage the intelligent access key .
3. Press and hold memory button 1 for about five seconds. A tone will sound after about two seconds. Continue to hold until you hear a second tone. 4. Press the lock button on the remote control within three seconds. Repeat this procedure with memory button 2 and a second transmitter if desired.
V ehicles with automatic climate control can be configured to operate when the vehicle is remote started. See the Climate Control chapter for more information. A manual climate control system will run at the setting it was set to when your vehicle was last turned off.
The parking lamps will remain on and your vehicle will run for 5, 10, or 15 minutes, depending on the setting. See the Information Displays chapter to select the duration of the remote start system. Extending the V ehicle Run Time Repeat Steps 1 and 2 with your vehicle still running to extend the run time for another remote start duration.
PRINCIPLES OF OPERA TION MyKey allows you to program keys with restricted driving modes to promote good driving habits. All but one of the keys programmed to the vehicle can be activated with these restricted modes. Any keys that have not been programmed are referred to as administrator keys or admin keys.
• Audio system maximum volume of 45%. A message will be shown in the display when you attempt to exceed the limited volume. Also, the speed-sensitive or compensated automatic volume control will be disabled. • Always on setting. When this is selected, you will not be able to turn off AdvanceT rac (if your vehicle is equipped with this feature).
Note: Y ou can clear or change your MyKey settings at any time during the same key cycle as you created the MyKey . Once you have switched the engine off, however , you will need an admin key to change or clear your MyKey settings. CLEARING ALL MYKEYS Y ou can clear all MyKeys within the same key cycle as you created the MyKey .
MYKEY TROUBLESHOOTING Condition Potential causes I cannot create a MyKey . • The key or fob used to start the vehicle does not have admin privileges. • The key or fob used to start the vehicle is the only admin key (there always has to be at least one admin key).
LOCKING AND UNLOCKING Y ou can use the power door lock control or the remote control to lock and unlock your vehicle. Power Door Locks The power door lock control is located on the driver and front passenger door panels. A. Unlock B. Lock Remote Control Y ou can use the remote control anytime your vehicle is not running.
Note: If any door or the luggage compartment is open, or if the hood is open on vehicles with an anti-theft alarm or remote start, the horn sounds twice and the lamps will not flash. Power Liftgate W ARNING: Make sure all persons are clear of the liftgate area before using power liftgate control.
At the Liftgate Press the exterior liftgate release button on the top of the liftgate pull-cup handle. Smart Unlocks The smart unlock feature is intended to prevent you from unintentionally locking your intelligent access key inside your vehicle’ s passenger compartment or rear cargo area.
Autounlock Feature (If Enabled) The autounlock feature unlocks all the doors when: • the ignition is on, all the doors are closed, and your vehicle has been in motion at a speed greater than 12 mph .
Battery Saver If you leave the courtesy lamps, dome lamps or headlamps on, the battery saver shuts them off 10 minutes after you switch the ignition off.
Opening and Closing the Power Liftgate Note: Y ou can reverse the liftgate movement direction with a second press of the instrument panel button or the button on the liftgate, or a second double press of the transmitter button. The liftgate will only operate with the vehicle in P.
Obstacle Detection When closing: The system will reverse to full open when it detects an obstacle. A chime will sound three times as the liftgate begins to reopen. Remove the obstacle to close the liftgate. Note: Entering your vehicle while the liftgate is closing can cause your vehicle to bounce and activate obstacle detection.
Note: Do not hang anything, for example a bike rack, from the spoiler , glass or liftgate. This could damage the liftgate and its components. Note: Do not leave the liftgate open while driving. This could damage to the liftgate and its components. The liftgate area is only intended for cargo, not passengers.
Programming a Personal Entry Code T o create your own personal entry code: 1. Enter the factory-set code. 2. Press the 1 • 2 on the keypad within five seconds. 3. Enter your personal 5-digit code. Y ou must enter each number within five seconds of each other .
Anti-Scan Feature The keypad will go into an anti-scan mode if you enter the wrong code seven times (35 consecutive button presses). This mode disables the keypad for one minute and the keypad lamp will flash.
SECURILOCK® P ASSIVE ANTI-THEFT SYSTEM Note: The system is not compatible with non-Ford aftermarket remote start systems. Use of these systems may result in vehicle starting problems and a loss of security protection.
Programming a Spare Intelligent Access Key Note: A maximum of four intelligent access keys can be programmed to your vehicle. Y ou must take your vehicle and all access keys to your authorized dealer .
8. V erify that the remote entry functions operate (press lock then unlock, making sure you end in unlock) and that the vehicle starts with new intelligent access key .
ADJUSTING THE STEERING WHEEL W ARNING: Do not adjust the steering wheel when your vehicle is moving. Note: Make sure that you are sitting in the correct position. See Sitting in the Correct Position in the Seats chapter . 1. Unlock the steering column.
Use the control on the side of the steering column to adjust the position. T o adjust: • tilt: press the top or bottom of the control • telescope: press the front or rear of the control.
AUDIO CONTROL SEEK: Press to select the next or previous stored preset or track. Press and hold to select the next or previous frequency or seek through a track. MEDIA: Press repeatedly to scroll through available audio modes. MUTE: Press to silence the radio.
CRUISE CONTROL T ype 1 T ype 2 See the Cruise Control chapter for information on this feature. INFORMA TION DISPLA Y CONTROL See the Information Displays chapter for more information.
Cluster Display Control Features Use this control to adjust the right side of the cluster display . Navigate through the screen and press OK to select. See the MyLincoln T ouch chapter . HEA TED STEERING WHEEL (IF EQUIPPED) See the MyLincoln T ouch chapter .
WINDSHIELD WIPERS Note: Fully defrost the windshield in icy conditions before turning on the windshield wipers. Note: Make sure the windshield wipers are switched off before entering a car wash. Note: Clean the windshield and wiper blades if they begin to leave streaks or smears.
Keep the outside of the windshield clean, especially the area around the interior mirror where the sensor is located, or sensor performance may be affected. WINDSHIELD W ASHERS Note: Do not operate the wipers on a dry windshield. This may scratch the glass, damage the wiper blades or cause the wiper motor to burn out.
LIGHTING CONTROL A. Off B. Parking lamps, instrument panel lamps, license plate lamps and tail lamps C. Headlamps High Beams Push the lever forward to switch the high beams on. Push the lever forward again or pull the lever toward you to switch the high beams off.
The autolamp system provides light sensitive automatic on-off control of the exterior lights normally controlled by the headlamp control. The headlamps will remain on for a period of time after you switch the ignition off. Y ou can adjust the time delay using the message center in the instrument cluster .
7. T urn the lighting control to the off position when the desired delay time has been reached. The headlamps and parking lamps will turn off. Y ou can set the headlamp exit delay to one of the follow.
FRONT FOG LAMPS The fog lamps can be turned on when the lighting control is in the headlamps, parking lamps or autolamps positions and the high beams are not turned on. ADAPTIVE HEADLAMPS (if equipped) The headlamp beams move in the same direction as the steering wheel which provides more visibility when driving around curves.
The system will only work with the lighting control switch in the autolamp position. Note: There is a delay of two to five seconds before the adaptive headlamp system will operate when the vehicle is driven. Note: The system is only active at speeds above 3 mph (5 km/h).
INTERIOR LAMPS Dome Lamp Control W ithout fog lamps W ith fog lamps Use to manually turn the dome lamp on. • Press the control. This will turn on the interior courtesy lights.
Front Row Map Lamps (If Equipped) T o turn on the map lamps, press the outer edge of the clear lens. The front row map lamp lights when: • any door is opened. • the dome lamp button on the instrument panel is activated. • the remote entry controls are pressed and the ignition is off.
POWER WINDOWS W ARNING: Do not leave children unattended in your vehicle and do not let children play with the power windows. They may seriously injure themselves. W ARNING: When closing the power windows, you should verify they are free of obstructions and make sure that children and pets are not in the proximity of the window openings.
Bounce-Back The window will stop automatically while closing and reverse some distance if there is an obstacle in the way . Overriding the Bounce-Back Feature W ARNING: When you override the bounce-back feature the window will not reverse if it detects an obstacle.
EXTERIOR MIRRORS Power Exterior Mirrors W ARNING: Do not adjust the mirror while your vehicle is in motion. A. Left mirror B. Off C. Right mirror T o adjust your mirrors: 1. Select the mirror you want to adjust. 2. Move the control in the direction you want to tilt the mirror .
Integrated Blind Spot Mirrors (If Equipped) W ARNING: Objects in the blind spot mirror are closer than they appear . Blind spot mirrors have an integrated convex mirror built into the upper outboard corner of the exterior mirrors. They are designed to assist you by increasing visibility along the side of your vehicle.
INTERIOR MIRROR W ARNING: Do not adjust the mirror when your vehicle is moving. Note: Do not clean the housing or glass of any mirror with harsh abrasives, fuel or other petroleum or ammonia based cleaning products. Y ou can adjust the interior mirror to your preference.
Illuminated Visor V anity Mirror Lift the cover to switch on the lamp. P ANORAMIC VIST A ROOF® AND POWER SUNSHADES (IF EQUIPPED) W ARNING: Do not let children play with the panoramic Vista Roof® and power sunshade or leave children unattended in the vehicle.
Opening the Sunshade and Moonroof Note: The moonroof will only open after sunshades are completely open. Press and release the control to open the sunshade. The front and rear sunshades open simultaneously . Press and release the control to open the moonroof.
GAUGES Cluster shown in standard measure – metric clusters similar . A. Left information display . See Information displays for more information. B. Speedometer C.
Adaptive cruise control (if equipped) (RTT) The speed control system indicator light changes color to indicate what mode the system is in: • On (gray light): Illuminates when the adaptive cruise control system is turned on. T urns off when the speed control system is turned off.
Charging system (RTT) Illuminates when the battery is not charging properly . If it stays on while the engine is running, there may be a malfunction with the charging system. Contact your authorized dealer as soon as possible. This indicates a problem with the electrical system or a related component.
High beams Illuminates when the high-beam headlamps are on. Low fuel (RTT) Illuminates when the fuel level in the fuel tank is at or near empty . Low tire pressure warning Illuminates when your tire pressure is low . If the light remains on at start up or while driving, the tire pressure should be checked.
Service engine soon The service engine soon indicator light illuminates when the ignition is first turned to the on position to check the bulb and to indicate whether the vehicle is ready for Inspection/Maintenance (I/M) testing.
Stability Control System Displays when the AdvanceT rac®/T raction control is active. If the light remains on, have the system serviced immediately . Stability Control System Off Illuminates when AdvanceT rac®/T raction control has been disabled by the driver .
GENERAL INFORMA TION W ARNING: Driving while distracted can result in loss of vehicle control, crash and injury . W e strongly recommend that you use extreme caution when using any device that may take your focus off the road. Y our primary responsibility is the safe operation of your vehicle.
• Settings Scroll up/down to highlight one of the categories, then press the right arrow key or OK to enter into that category . Press the left arrow key as needed to exit back to the main menu. Display Mode Use the up/down arrow buttons to choose between the following display options.
• Bar/Round tachometer: Indicates the engine speed in revolutions per minute. Driving with your tachometer pointer continuously at the top of the scale may damage the engine. During SelectShift Automatic™ transmission (SST) use, the currently selected gear will appear in the display .
Fuel Economy Use the left/right arrow buttons to choose the desired fuel economy display . Fuel Economy Fuel Economy Inst. Fuel Economy XX. Min Fuel History Instantaneous fuel usage x Fuel usage over .
Settings In this mode, you can configure different driver setting choices. Note: Some items are optional and may not appear . Settings V ehicle DTE Calculation Normal or T owing Easy Entry/Exit — ch.
Settings (cont’d) *MyKey Create MyKey Press and hold OK to create MyKey 911 Assist Always On / User Selectable T raction Control Always On / User Selectable Max Speed Choose desired speed or off Spe.
INFORMA TION MESSAGES Note: Depending on the vehicle options equipped with your vehicle, not all of the messages will display or be available. Certain messages may be abbreviated or shortened depending upon which cluster type you have. Press the OK button to acknowledge and remove some messages from the information display .
Alarm/Security Messages Action / Description T o Stop Alarm, Start V ehicle Displayed when the perimeter alarm system is armed and the vehicle is entered using the key on the driver’ s side door . In order to prevent the perimeter alarm system from triggering, the ignition must be turned to start or on before the 12 second chime expires.
Battery and Charging System Messages Action / Description Check Charging System Displayed when the charging system needs servicing. If the warning stays on or continues to come on, contact your authorized dealer as soon as possible.
BLIS® Messages Action / Description Cross T raffic System Fault Displayed when a fault with the cross traffic alert system has occurred. Contact your authorized dealer as soon as possible. V ehicle Coming From X Displayed when the blind spot information system with cross traffic alert (CT A) system is operating and senses a vehicle.
Collision W arning System Messages Action / Description Collision W arning Malfunction Displayed when there is a system malfunction with the collision warning system.
Keys and Intelligent Access Messages Action / Description No Key Detected Displayed if the intelligent access key is not detected by the system in the following three scenarios: • When the start/stop button is pressed in an attempt to either start the engine or cycle through the ignition states.
Maintenance Messages Action / Description LOW Engine Oil Pressure Stop the vehicle as soon as safely possible, turn off the engine. Check the oil level. If the warning stays on or continues to come on with your engine running, contact your authorized dealer as soon as possible.
MyKey® Messages Action / Description V ehicle Near MyKey T op Speed Displayed when a MyKey® is in use and the MyKey speed limit is on and the vehicle speed is 80 mph (130 km/h). V ehicle Near MyKey T op Speed Displayed when a MyKey® is in use and the MyKey speed limit is on and the vehicle speed is approaching 80 mph (130 km/h).
Reminder Messages Action / Description Steering Lock T urn Wheel to Unlock Displays when you need to turn the steering wheel in order to disengage the steering lock. Shift to Park Displayed when the engine is turned off and shift select lever is in any position other than P (Park).
DUAL AUTOMA TIC TEMPERA TURE CONTROL SYSTEM Note: Y ou can switch temperature units between Fahrenheit and Celsius. See Settings in the MyLincoln T ouch chapter . A. MyT emp: Allows you to quickly adjust to a frequently used setting with a single touch.
F. A/C: Press to turn air conditioning off and on. Air conditioning cools the vehicle using outside air . T o improve air conditioning when starting your vehicle, drive with the windows slightly open for two to three minutes. Use air conditioning with recirculated air to improve cooling performance and efficiency .
During extreme high ambient temperatures when idling stationary for extended periods of time in gear , it is recommended to run the air conditioning in the MAX A/C mode, adjust the blower fan speed to the lowest setting and put the vehicle’ s transmission into position P to continue to receive cool air from your air conditioning system.
CABIN AIR FIL TER Note: A cabin air filter must be installed at all times to prevent foreign objects from entering the system. Running the system without a filter in place could result in degradation or damage to the system. Y our vehicle is equipped with a filter; the access door is located behind the glove box.
Automatic Climate Systems Automatic Settings Y ou can set the climate control to operate in AUTO mode through the information display setting: Remote Start > Climate Control > Heater – A/C > Auto. The climate control system automatically sets the interior temperature to 72°F (22°C).
SITTING IN THE CORRECT POSITION W ARNING: Sitting improperly out of position or with the seat back reclined too far can take off weight from the seat cushion and affect the decision of the passenger sensing system, resulting in serious injury or death in a crash.
• Position the shoulder strap of the safety belt over the center of your shoulder and position the lap strap tightly across your hips. Make sure that your driving position is comfortable and that you can maintain full control of your vehicle.
Rear Seat Center Head Restraint The head restraints consist of: A. an energy absorbing head restraint B. two steel stems C. guide sleeve unlock and remove button D. guide sleeve adjust and release button T o adjust the head restraint, do the following: • Raise: Pull up on the head restraint (A).
Tilting Head Restraints (If Equipped) The front head restraints may tilt for extra comfort. T o tilt the head restraint, do the following: 1. Adjust the seatback to an upright driving or riding position. 2. T ilt the head restraint forward by gently pulling the top of the head restraint.
Power Lumbar Seats 131 2014 MKX (mkx) Owners Guide gf, 1st Printing, November 2013 USA (fus).
MEMOR Y FUNCTION The memory control, located on the instrument panel, allows automatic positioning of the following features to two programmable positions: • Driver seat. • Power mirrors. • Optional power steering column. Programming a Memory Position 1.
• you switch the keyless ignition off. The seat and steering wheel will move to their original positions when: • you place the transmission in position N or P, and • you switch the keyless ignition on. T urn the Easy Entry/Exit feature on or off through the information display settings menu.
V entilated Seats The ventilated seats will only function when the engine is running. T o operate the ventilated seats: Press the ventilated seat symbol located on the touchscreen to cycle through the various cooling settings and off. Cooler settings are indicated by more indicator lights.
REAR SEA TS W ARNING: T o prevent possible damage to the seat or safety belts, make sure that the safety belts are not buckled when folding the seatback. • Reclining the seatback: With the seat occupied, pull the lever up to recline the seatback. • Folding the seatback: With the seat empty , pull the lever up to fold the seatback forward.
REAR SEA T ARMREST Fold the armrest down to use the armrest and cupholder . Lift up one of the slotted areas on the cover to access the cup holder . T o close the armrest, close the cupholder cover and rotate the armrest rearward until the latch clicks.
• Operate the seat heater if water or any other liquid is spilled on the seat. Allow the seat to dry thoroughly . The rear seat heat controls are located on the rear door panels. The heated seats only operate when the ignition is on. T o operate the heated seats: • Press the indicated side of the control for maximum heat.
HOMELINK® WIRELESS CONTROL SYSTEM (IF EQUIPPED) W ARNING: Make sure that the garage door and security device are free from obstruction when you are programming.
Programming Note: Put a new battery in the hand-held transmitter . This will ensure quicker training and accurate transmission of the radio-frequency signal. 1. W ith your vehicle parked outside of the garage and your key in the ignition, turn the key so that the ignition is in the on position.
After programming the HomeLink button, follow Step s5–7a sl i s t e d below to program your garage door opener . Note: Y ou may need a ladder to reach the unit and you may need to remove the cover or lamp lens on your garage door opener .
Programming HomeLink to a Genie Intellicode 2 garage door opener Note: The Genie Intellicode 2 transmitter must already be programmed to operate with the garage door opener . Programing the transmitters T o program HomeLink to the transmitter you must first put the transmitter into programming mode.
Programming HomeLink to the Genie Intellicode garage door opener motor Note: Y ou may need a ladder to access the garage door opener motor . T o program HomeLink to the garage door opener motor: 1. Press and hold the PROGRAM button on the garage door opener motor until both blue LED’ s turn on.
AUXILIAR Y POWER POINTS Note: Do not insert objects other than an accessory plug into the power point. This will damage the outlet and blow the fuse. Note: Do not hang any type of accessory or accessory bracket from the plug. Note: Improper use of the power outlet can cause damage not covered by your warranty .
CENTER CONSOLE Stow items in the cupholder carefully as items may become loose during hard braking, acceleration or collisions, including hot drinks which may spill. A vailable console features include: A. Cupholders B. Cover: T wo pen holders, travel tissue pack holder , and business card or paper holder .
GENERAL INFORMA TION W ARNING: Extended idling at high engine speeds can produce very high temperatures in the engine and exhaust system, creating the risk of fire or other damage. W ARNING: Do not park, idle, or drive your vehicle on dry grass or other dry ground cover .
Ignition Modes Off: T urns the ignition off. • W ithout applying the brake pedal, press and release the button once when the ignition is in the on mode, or when the engine is running but the vehicle is not in motion. Accessory: Allows some electrical accessories to operate while the engine is not running.
The system does not function if: • The key frequencies are jammed. • The key battery has no charge. If you are unable to start your vehicle, do the following: 1. Locate the key backup slot at the front of the center console storage compartment. 2.
Stopping the Engine When Y our V ehicle Is Stationary 1. Move the transmission selector lever to position P. 2. Press the button once. 3. Apply the parking brake. Note: This switches off the ignition, all electrical circuits, warning lamps and indicators.
ENGINE BLOCK HEA TER (IF EQUIPPED) W ARNING: Failure to follow engine block heater instructions could result in property damage or physical injury . W ARNING: Do not use your heater with ungrounded electrical systems or two-pronged (cheater) adapters.
• Keep plug terminals clean and free of dirt and corrosion. • Make sure the heater system is checked for proper operation before winter . Using the Engine Block Heater Make sure the receptacle terminals are clean and dry before use. T o clean them, use a dry cloth.
SAFETY PRECAUTIONS W ARNING: Do not overfill the fuel tank. The pressure in an overfilled tank may cause leakage and lead to fuel spray and fire. W ARNING: The fuel system may be under pressure. If you hear a hissing sound near the fuel filler inlet, do not refuel until the sound stops.
• A void getting fuel liquid in your eyes. If fuel is splashed in the eyes, remove contact lenses (if worn), flush with water for 15 minutes and seek medical attention. Failure to seek proper medical attention could lead to permanent injury . • Fuels can also be harmful if absorbed through the skin.
Choosing the Right Fuel With a Flex Fuel Vehicle (If Equipped) Use only UNLEADED gasoline or UNLEADED gasoline blended with a maximum of 85% ethanol (E-85) in your Flex Fuel V ehicle (FFV). If your vehicle is flex fuel capable, it will have a yellow bezel placed over the fuel fill inlet.
• Normally , adding 1 gallon (3.8 liters) of fuel is enough to restart the engine. If the vehicle is out of fuel and on a steep grade, more than 1 gallon (3.
REFUELING W ARNING: Fuel vapor burns violently and a fuel fire can cause severe injuries. T o help avoid injuries to you and others: • Read and follow all the instructions on the pump island. • T urn off your engine when you are refueling. • Do not smoke if you are near fuel or refueling your vehicle.
4. After you are done pumping fuel, wait about five seconds before slowly removing the fuel filler nozzle. This allows residual fuel to drain back into the fuel tank and not spill onto the vehicle. Note: A fuel spillage concern may occur if overfilling the fuel tank.
For consistent results when filling the fuel tank: • T urn the ignition off before fueling; an inaccurate reading results if the engine is left running. • Use the same fill rate (low–medium–high) each time the tank is filled. • Allow no more than two automatic click–offs when filling.
Y our vehicle is equipped with various emission control components and a catalytic converter which will enable your vehicle to comply with applicable exhaust emission standards. T o make sure that the catalytic converter and other emission control components continue to work properly: • Use only the specified fuel listed.
On-board Diagnostics (OBD-II) Y our vehicle is equipped with a computer that monitors the engine’ s emission control system. This system is commonly known as the on-board diagnostics system (OBD-II). The OBD-II system protects the environment by ensuring that your vehicle continues to meet government emission standards.
Readiness for Inspection/Maintenance (I/M) T esting Some state, provincial and local governments may have Inspection/Maintenance (I/M) programs to inspect the emission control equipment on your vehicle. Failure to pass this inspection could prevent you from getting a vehicle registration.
AUTOMA TIC TRANSMISSION W ARNING: Always set the parking brake fully and make sure the gearshift is latched in P (Park). T urn the ignition to the off position and remove the key whenever you leave your vehicle. Y our vehicle has been designed to improve fuel economy by reducing fuel usage while coasting or decelerating.
S (Sport) Moving the gearshift lever to S (Sport): • Provides additional grade (engine) braking and extends lower gear operation to enhance performance for uphill climbs, hilly terrain or mountainous areas. This will increase engine RPM during engine braking.
When using the paddles for manual shifting: • Pull the right paddle (+) to upshift. • Pull the left paddl e(–)t o downshift. Upshift to the recommended shift speeds according to the following ch.
Brake-shift interlock W ARNING: Do not drive your vehicle until you verify that the brakelamps are working. W ARNING: When doing this procedure, you will be taking the vehicle out of park which means the vehicle can roll freely . T o avoid unwanted vehicle movement, always fully set the parking brake prior to doing this procedure.
2. Locate the brake shift interlock lever in front of the shifter assembly . 3. Apply the brake pedal. Gently push and hold the brake shift interlock lever while pulling the gearshift lever out of the P (Park) position and into the N (Neutral) position.
USING YOUR ALL-WHEEL DRIVE (A WD) SYSTEM (IF EQUIPPED) A WD uses all four wheels to power the vehicle. This increases traction, enabling you to drive over terrain and road conditions that a conventional two-wheel drive vehicles cannot. The A WD system is active all the time and requires no input from the operator .
Driving In Special Conditions With All-Wheel Drive (A WD) A WD vehicles are equipped for driving on sand, snow , mud and rough roads and have operating characteristics that are somewhat different from conventional vehicles, both on and off the highway .
W ARNING: Do not spin the wheels at over 35 mph (56 km/h). The tires may fail and injure a passenger or bystander . Note: Do not rock the vehicle if the engine is not at normal operating temperature or damage to the transmission may occur .
T o resume normal A WD function as soon as possible, stop the vehicle in a safe location and stop the engine for at least 10 minutes. After the engine has been restarted and the A WD system has adequately cooled, the A WD Off message will turn off and normal A WD function will return.
“T read Lightly” is an educational program designed to increase public awareness of land-use regulations and responsibilities in our nations wilderness areas.
Driving on Snow and Ice W ARNING: If you are driving in slippery conditions that require tire chains or cables, then it is critical that you drive cautiously . Keep speeds down, allow for longer stopping distances and avoid aggressive steering to reduce the chances of a loss of vehicle control which can lead to serious injury or death.
Maintenance and Modifications The suspension and steering systems on your vehicle have been designed and tested to provide predictable performance whether loaded or empty and durable load carrying capability .
GENERAL INFORMA TION Note: Occasional brake noise is normal. If a metal-to-metal, continuous grinding or continuous squeal sound is present, the brake linings may be worn out.
Anti-Lock Brake System This system helps you maintain steering control during emergency stops by keeping the brakes from locking. This lamp momentarily illuminates when you turn the ignition on. If the light does not illuminate during start-up, remains on or flashes, the anti-lock brake system may be disabled and may need to be serviced.
HILL ST ART ASSIST W ARNING: The hill start assist feature does not replace the parking brake. When you leave the vehicle, always apply the parking brake and shift the transmission into park (P). W ARNING: Y ou must remain in the vehicle once you have activated the hill start assist feature.
PRINCIPLES OF OPERA TION The traction control system helps avoid drive wheel spin and loss of traction. If your vehicle begins to slide, the system applies the brakes to individual wheels and, when needed, reduces engine power at the same time.
PRINCIPLES OF OPERA TION W ARNING: V ehicle modifications involving braking system, aftermarket roof racks, suspension, steering system, tire construction or wheel and tire size may change the handling characteristics of the vehicle and may adversely affect the performance of the AdvanceT rac® system.
A V ehicle without AdvanceT rac® with RSC® skidding off its intended route. B V ehicle with AdvanceT rac® with RSC® maintaining control on a slippery surface. USING ADV ANCETRAC® WITH RSC® The system automatically activates when you start your engine.
SENSING SYSTEM W ARNING: T o help avoid personal injury , please read and understand the limitations of the system as contained in this section. Sensing is only an aid for some (generally large and fixed) objects when moving in reverse on a flat surface at parking speeds.
The system can be turned off using the information display control. Refer to the Information Display chapter . If a fault is present in the system, a warning message appears in the information display and does not allow the driver to switch the faulted system on.
REAR VIEW CAMERA SYSTEM W ARNING: The rear view camera system is a reverse aid supplement device that still requires the driver to use it in conjunction with the interior and exterior mirrors for maximum coverage.
Using the Rear View Camera System The rear view camera system displays what is behind your vehicle when you place the transmission in R (Reverse). The system uses two types of guides to help you see what is behind your vehicle: 1.
Guidelines and the Centerline Note: Fixed guidelines are only available when the transmission is in R (Reverse). Note: The centerline is only available if Fixed guidelines are on. A. Rear bumper B. Fixed guideline: Red zone C. Fixed guideline: Y ellow zone D.
Manual Zoom W ARNING: When manual zoom is on, the full area behind the vehicle is not shown. Be aware of your surroundings when using the manual zoom feature. Note: Manual zoom is only available when the transmission is in R (Reverse). Note: When manual zoom is enabled, only the centerline is shown.
PRINCIPLES OF OPERA TION Cruise control lets you maintain a set speed without keeping your foot on the accelerator pedal. USING CRUISE CONTROL W ARNING: Do not use cruise control in heavy traffic, on winding roads or when the road surface is slippery .
Changing the Set Speed Note: If you accelerate by pressing the accelerator pedal, the set speed will not change. When you release the accelerator pedal, you will return to the speed that you previously set. • Press SET up or down and hold to increase or decrease the set speed.
W ARNING: Do not use the adaptive cruise control when entering or leaving a highway , in heavy traffic or on roads that are winding, slippery or unpaved. W ARNING: Do not use in poor visibility , specifically fog, rain, spray or snow . Note: It is your responsibility to stay alert, drive safely and be in control of your vehicle at all times.
4. T ake your foot off the accelerator pedal. 5. A lead vehicle graphic will illuminate if there is a vehicle detected in front of you. Note: When adaptive cruise control is active, the set speed displayed in the information display may vary slightly from the speedometer .
If the system predicts that its maximum braking level will not be sufficient, an audible warning will sound while the system continues to brake. This is accompanied by a heads-up display; a red warning bar illuminating on the windshield. Y ou should take immediate action.
When you are overriding the system, the green indicator light illuminates and the follow vehicle does not show in the information display . The system will resume operation when you release the accelerator pedal. The vehicle speed will decrease to the set speed, or a lower speed if following a slower vehicle.
Switching Off Adaptive Cruise Control Note: The set speed memory will erase when you switch the system off. Press and release OFF or turn off the ignition. Detection Issues The radar sensor has a limited field of vision. It may not detect vehicles at all or detect a vehicle later than expected in some situations.
Adaptive Cruise Control Not Available Several conditions exist which can cause the system to deactivate or prevent the system from activating when requested. These conditions include: • a blocked sensor • high brake temperature • a failure in the system or a related system.
Cause Action The surface of the radar in the grille is dirty or obstructed in some way . Clean the grille surface in front of the radar or remove the object causing the obstruction. The surface of the radar in the grille is clean but the message remains in the display .
BLIND SPOT INFORMA TION SYSTEM (BLIS®) WITH CROSS TRAFFIC ALERT (CT A) (IF EQUIPPED) W ARNING: T o help avoid injuries, NEVER use the BLIS® as a replacement for using the interior and exterior mirrors and looking over your shoulder before changing lanes.
Using the Systems BLIS® turns on when the engine is started and the vehicle is driven forward above 3 mph (5 km/h); it remains on while the transmission is in D (Drive) and N (Neutral). If shifted out of D (Drive) or N (Neutral), the system enters CT A mode.
Zone coverage also decreases when parking at shallow angles. Here, the left sensor is mostly obstructed; zone coverage on that side is severely limited. System Lights and Messages The BLIS® and CT A systems illuminate a yellow alert indicator in the outside mirror on the side of the vehicle the approaching vehicle is coming from.
System Sensors W ARNING: Just prior to the system recognizing a blocked condition and alerting the driver , the number of missed objects will increase. T o help avoid injuries, NEVER use the BLIS® as a replacement for using the side and rear view mirrors and looking over your shoulder before changing lanes.
Reasons for messages being displayed Heavy rainfall/snowfall interferes with the radar signals No action required. The system automatically resets to an unblocked state once the rainfall/snowfall rate decreases or stops. Do not use BLIS® and/or CT A in these conditions.
Switching the Systems Off and On One or both systems can be switched off temporarily by using the information display control; refer to the Information Display chapter . When the BLIS® is switched off, the driver does not receive alerts and the information display shows BLIND SPOT SYS OFF and/or CT A SYSTEM OFF .
If it is, a red warning light illuminates and an audible warning chime sounds. The brake support system assists the driver in reducing the collision speed by charging the brakes. If the risk of collision further increases after the warning light illuminates, the brake support prepares the brake system for rapid braking.
Blocked Sensors If a message regarding a blocked sensor appears in the information display , the radar signals from the sensor have been obstructed. The sensors are located behind a fascia cover near the driver side of the lower grille.
System Limitations W ARNING: The collision warning system’ s brake support can only help reduce the speed at which a collision occurs if the driver applies the vehicle’ s brakes. The brake pedal must be pressed just like any typical braking situation.
STEERING T o help prevent damage to the power steering system: • Never hold the steering wheel at its furthest turning points (until it stops) for more than three to five seconds while the engine is running. • Do not operate the vehicle with a low power steering pump fluid reservoir level (below the MIN mark on the reservoir).
CARGO NETS W ARNING: This net is not designed to restrain objects during a collision or heavy braking. The cargo net secures lightweight objects in the cargo area. Attach the net to the anchors provided in one of the two configurations. Repeat the attachment on both sides of the vehicle.
T ype 2 CARGO MANAGEMENT SYSTEM The system is located in the floor of the cargo area. Lift the release handle to open. Load Carrying 205 2014 MKX (mkx) Owners Guide gf, 1st Printing, November 2013 USA.
ROOF RACKS AND LOAD CARRIERS (IF EQUIPPED) W ARNING: When loading the roof racks, we recommend you evenly distribute the load, as well as maintain a low center of gravity . Loaded vehicles, with higher centers of gravity , may handle differently than unloaded vehicles.
UTILITY HOOK Y ou can use the utility hook to hang small items such as grocery bags. Do not hang more than 10 pounds (4.5 kilograms) on the hook. LOAD LIMIT V ehicle Loading – With and Without a T r.
Payload – is the combined weight of cargo and passengers that the vehicle is carrying. The maximum payload for your vehicle can be found on the T ire Label on the B-Pillar or the edge of the driver’ s door (vehicles exported outside the US and Canada may not have a T ire Label).
Example only: Cargo W eight – includes all weight added to the Base Curb W eight, including cargo and optional equipment. When towing, trailer tongue load weight is also part of cargo weight. GA W (Gross Axle W eight) – is the total weight placed on each axle (front and rear) – including vehicle curb weight and all payload.
GA WR (Gross Axle W eight Rating) – is the maximum allowable weight that can be carried by a single axle (front or rear). These numbers are shown on the Safety Compliance Certification Label.
• Example only: W ARNING: Exceeding the Safety Compliance Certification Label vehicle weight rating limits could result in substandard vehicle handling or performance, engine, transmission and/or structural damage, serious damage to the vehicle, loss of control and personal injury .
GCW (Gross Combined W eight) – is the weight of the loaded vehicle (GVW) plus the weight of the fully loaded trailer . GCWR (Gross Combined W eight Rating) – is the maximum allowable weight of the vehicle and the loaded trailer – including all cargo and passengers – that the vehicle can handle without risking damage.
Steps for determining the correct load limit: 1. Locate the statement “The combined weight of occupants and cargo should never exceed XXX kg or XXX lbs.” on your vehicle’ s placard. 2. Determine the combined weight of the driver and passengers that will be riding in your vehicle.
• Suppose your vehicle has a 1400 lb. (635 kg) cargo and luggage capacity . Y ou and one of your friends decide to pick up cement from the local home improvement store to finish that patio you have been planning for the past 2 years. Measuring the inside of the vehicle with the rear seat folded down, you have room for 12-100 lb.
TOWING A TRAILER W ARNING: Do not exceed the GVWR or the GA WR specified on the certification label. W ARNING: T owing trailers beyond the maximum recommended gross trailer weight exceeds the limit of.
TRAILER SW A Y CONTROL W ARNING: T urning off trailer sway control increases the risk of loss of vehicle control, serious injury or death. Ford does not recommend disabling this feature except in situ.
Y our vehicle may tow a Class I or II trailer provided the maximum trailer weight is less than or equal to the maximum trailer weight listed for your vehicle configuration on the following chart. Powertrain Maximum GCWR Maximum trailer weight 3.7L T iVCT front-wheel drive * 6770 lb (3071 kg) 2000 lb (907 kg) 3.
T railer T owing Connector (V ehicles Equipped with a T railer-towing or Prep Package) The trailer towing connector is located under the rear bumper , on the left side of your vehicle. Y ou must use a four -pin trailer wiring connector for your vehicle and the trailer lighting equipment.
T railer Brakes W ARNING: Do not connect a trailer’ s hydraulic brake system directly to your vehicle’ s brake system. Y our vehicle may not have enough braking power and your chances of having a collision greatly increase.
• T urn off the speed control with heavy loads or in hilly terrain. The speed control may turn off automatically when you are towing on long, steep grades. • Shift to a lower gear when driving down a long or steep hill. Do not apply the brakes continuously , as they may overheat and become less effective.
TRANSPORTING THE VEHICLE If you need to have your vehicle towed, contact a professional towing service or , if you are a member of a roadside assistance program, your roadside assistance service provider . W e recommend the use of a wheel lift and dollies or flatbed equipment to tow your vehicle.
Front-wheel drive vehicles must have the front wheels placed on a tow dolly when towing your vehicle from the rear using wheel lift equipment. This prevents damage to the transmission. T owing an all-wheel drive vehicle requires that all wheels be off the ground, such as using a wheel lift and dollies or flatbed equipment.
If you tow your vehicle with all four wheels on the ground: • T ow only in the forward direction. • Release the parking brake. • Place the transmission in position N. • Place the ignition in the accessory mode. See Ignition in the Starting and Stopping the Engine chapter .
BREAKING-IN Y ou need to break in new tires for approximately 300 miles (480 kilometers). During this time, your vehicle may exhibit some unique driving characteristics. A void driving too fast during the first 1000 miles (1600 kilometers). V ary your speed frequently and change up through the gears early .
• Carry unnecessary weight (approximately 1 mpg [0.4 km/L] is lost for every 400 pounds [180 kilograms] of weight carried). • Add particular accessories to your vehicle (e.g.; bug deflectors, rollbars or light bars, running boards, ski racks). • Drive with the wheels out of alignment.
FLOOR MA TS W ARNING: Always use floor mats that are designed to fit the foot well of your vehicle, leaving the pedal area unobstructed, and which can be firmly secured to retention posts so that they cannot slip out of position and interfere with the pedals or impair safe operation of your vehicle in other ways.
ROADSIDE ASSIST ANCE V ehicles Sold in the United States: Getting Roadside Assistance T o fully assist you should you have a vehicle concern, Ford Motor Company offers a complimentary Roadside Assistance program. This program is separate from the New V ehicle Limited W arranty .
V ehicles sold in the United States: Using roadside assistance United States Lincoln vehicle clients who require Roadside Assistance, call 1-800-521-4140. If you need to arrange roadside assistance for yourself, Ford Motor Company will reimburse a reasonable amount for towing to the nearest Lincoln dealership within 100 miles (161 kilometers).
Should your vehicle shut off after a collision, you may restart your vehicle by doing the following: 1. T urn the ignition off. 2. T urn the ignition on. 3. Repeat steps 1 and 2 to re-enable fuel pump. Note: If your vehicle has the push button start system, press the stop/start button twice to reactivate the fuel system.
Connecting the Jumper Cables W ARNING: Do not connect the end of the second cable to the negative (-) terminal of the battery to be jumped. A spark may cause an explosion of the gases that surround the battery .
Removing the Jumper Cables Note: In the illustration, the vehicle on the bottom is used to designate the assisting (boosting) battery . Remove the jumper cables in the reverse order that they were connected. 1. Remove the jumper cable from the ground metal surface.
GETTING THE SERVICES YOU NEED W arranty repairs to your vehicle must be performed by an authorized dealer . While any authorized dealer handling your vehicle line will provide warranty service, we recommend you return to your selling authorized dealer who wants to ensure your continued satisfaction.
In Canada: Mailing address Lincoln Customer Relationship Centre Ford Motor Company of Canada, Limited P .O. Box 2000 Oakville, Ontario L6K 1C8 T elephone 1-800-387-9333 Online www .lincolncanada.com Additional assistance If you have questions or concerns, or are unsatisfied with the service you are receiving, follow these steps: 1.
IN CALIFORNIA (U.S. ONL Y) California Civil Code Section 1793.2(d) requires that, if a manufacturer or its representative is unable to repair a motor vehicle to conform to the vehicle’ s applicable .
THE BETTER BUSINESS BUREAU (BBB) AUTO LINE PROGRAM (U.S. ONL Y) Y our satisfaction is important to Ford Motor Company and to your dealer . If a warranty concern has not been resolved using the three-s.
UTILIZING THE MEDIA TION or ARBITRA TION PROGRAM (CANADA ONL Y) This pertains to vehicles delivered to authorized Canadian dealers. In those cases, where you continue to feel that the efforts by Ford .
If your vehicle must be serviced while you are traveling or living in Asia-Pacific Region, Sub-Saharan Africa, U.S. V irgin Islands, Central America, the Caribbean, and Israel, contact the nearest authorized dealer .
If your vehicle must be serviced while you are traveling or living in the Middle East, contact the nearest authorized dealer . If the authorized dealer cannot help you, contact: Ford Middle East Customer Relationship Center P .
Obtaining a French Owner ’ s Manual A French owner’ s manual can be obtained from your authorized dealer or by contacting Helm, Incorporated using the contact information listed previously in this section.
CHANGING A FUSE Fuses W ARNING: Always replace a fuse with one that has the specified amperage rating. Using a fuse with a higher amperage rating can cause severe wire damage and could start a fire. If electrical components in your vehicle are not working, a fuse may have blown.
FUSE SPECIFICA TION CHART Power Distribution Box W ARNING: Always disconnect the battery before servicing high current fuses. W ARNING: T o reduce risk of electrical shock, always replace the cover to the power distribution box before reconnecting the battery or refilling fluid reservoirs.
Fuse or relay number Fuse amp rating Protected components 5 40A** Anti-lock brake system pump 6 — Not used 7 30A** Power liftgate 8 20A** Moonroof 9 20A** Power point #2 (console rear) 10 — Not us.
Fuse or relay number Fuse amp rating Protected components 35 — Not used 36 — Rear seat relay 37 — Right trailer tow stop/turn lamps relay 38 — Not used 39 40A** Cooling fan (vehicles with trai.
Fuse or relay number Fuse amp rating Protected components 61 10A* Rear seat release 62 10A* Air conditioner clutch 63 15A* T railer tow stop/turn lamps relay 64 20A* Rear wiper motor 65 15A* Fuel pump.
Fuse or relay number Fuse amp rating Protected components 89 5A* Adaptive lighting 90 10A* Powertrain control module 91 10A* Adaptive cruise control 92 10A* Anti-lock brake system module 93 5A* Blower.
T o remove a fuse, use the fuse puller tool provided on the fuse panel cover . Fuse or relay number Fuse amp rating Protected components 1 30A Driver front smart window 2 15A Not used (spare) 3 30A Passenger front smart window 4 10A Demand lamps relay 5 20A Subwoofer 6 5A Radio frequency module 7 7.
Fuse or relay number Fuse amp rating Protected components 12 15A Interior lighting, Puddle lamps, Backlighting 13 15A Right turn/stop lamps and turn signals 14 15A Left turn/stop lamps and turn signal.
Fuse or relay number Fuse amp rating Protected components 30 15A Front park lamps 31 5A Not used (spare) 32 15A Moonroof, Power windows (front), Compass/auto-dimming rear view mirror 33 10A Not used (.
GENERAL INFORMA TION Have your vehicle serviced regularly to help maintain its roadworthiness and resale value. There is a large network of Ford authorized dealers who are there to help you with their professional servicing expertise.
OPENING AND CLOSING THE HOOD 1. Inside the vehicle, pull the hood release handle located under the bottom of the instrument panel near the steering column. 2. Go to the front of the vehicle and release the secondary hood latch located under the front passenger side of the hood.
UNDER HOOD OVERVIEW A. Engine coolant reservoir B. Power steering fluid reservoir C. Brake fluid reservoir D. Battery E. Power distribution box F . Air filter assembly G.
ENGINE OIL DIPSTICK 2.0L EcoBoost A. MIN B. MAX 3.5L, 3.7L and 3.5L EcoBoost A. MIN B. MAX ENGINE OIL CHECK Note: Check the level before starting the engine. Note: Make sure that the level is between the MIN and MAX marks. 1. Make sure that your vehicle is on level ground.
Adding Engine Oil Note: Do not remove the filler cap when the engine is running. Note: Do not add engine oil further than the MAX mark. Oil levels above the MAX mark may cause engine damage. Only use oils certified for gasoline engines by the American Petroleum Institute (API).
Adding Engine Coolant W ARNING: Do not add engine coolant when the engine is hot. Steam and scalding liquids released from a hot cooling system can burn you badly . Also, you can be burned if you spill coolant on hot engine parts. W ARNING: Do not put engine coolant in the windshield washer fluid container .
• Do not use alcohol, methanol, brine or any engine coolants mixed with alcohol or methanol antifreeze (coolant). Alcohol and other liquids can cause engine damage from overheating or freezing. • Do not add extra inhibitors or additives to the coolant.
What Y ou Should Know About Fail-Safe Cooling If the engine coolant supply is depleted, this feature allows the vehicle to be driven temporarily before incremental component damage is incurred. The fail-safe distance depends on ambient temperatures, vehicle load and terrain.
Y ou have limited engine power when in the fail-safe mode, so drive the vehicle with caution. The vehicle will not be able to maintain high-speed operation and the engine will run rough. Remember that the engine is capable of completely shutting down automatically to prevent engine damage, therefore: 1.
5. Remove the dipstick, wiping it clean with a clean, dry lint free rag. If necessary , refer to Under hood overview in this chapter for the location of the dipstick. 6. Install the dipstick making sure it is fully seated in the filler tube by turning it to the locked position.
Note: Use of a non-approved automatic transmission fluid may cause internal transmission component damage. If necessary , add fluid in 1/2 pint (250 ml) increments through the filler tube until the level is correct. If an overfill occurs, excess fluid should be removed by an authorized dealer .
FUEL FIL TER Y our vehicle is equipped with a lifetime fuel filter that is integrated with the fuel tank. Regular maintenance or replacement is not needed. W ASHER FLUID CHECK W ARNING: If you operate your vehicle in temperatures below 40°F (5°C), use washer fluid with antifreeze protection.
W ARNING: Keep batteries out of reach of children. Batteries contain sulfuric acid. A void contact with skin, eyes or clothing. Shield your eyes when working near the battery to protect against possible splashing of acid solution.
When the battery is disconnected or a new battery installed, the automatic transmission must relearn its adaptive strategy . As a result of this, the transmission may shift firmly when first driven. This operation is considered normal and will fully update transmission operation to its optimum shift feel.
CHECKING THE WIPER BLADES Run the tip of your fingers over the edge of the blade to check for roughness. Clean the wiper blades with washer fluid or water applied with a soft sponge or cloth. CHANGING THE WIPER BLADES 1. Pull the wiper arm away from the vehicle.
Changing rear window wiper blade The rear wiper arm is designed without a service position. This reduces the risk of damage to the blade in an automatic car wash. T o replace the wiper blade: 1. Grab the wiper arm with one hand close to the arm/blade joint and pull it as far away from the glass as possible.
Changing the air filter element 1. Release the clamps that secure the air filter housing cover . 2. Carefully separate the two halves of the air filter housing. 3. Remove the air filter element from the air filter housing. 4. W ipe the air filter housing and cover clean to remove any dirt or debris and to ensure good sealing.
• (1) 8 feet (2.4 meters) • (2) Center height of lamp to ground • (3) 25 feet (7.6 meters) • (4) Horizontal reference line 2. Measure the height of the headlamp bulb center from the ground and mark an 8 foot (2.4 meter) horizontal reference line on the vertical wall or screen at this height.
4. Locate the vertical adjuster on each headlamp. Using a Hex head driver , turn the adjuster either clockwise or counterclockwise in order to adjust the vertical aim of the headlamp. 5. Close the hood and turn off the lamps. HORIZONT AL AIM IS NOT REQUIRED FOR THIS VEHICLE AND IS NON-ADJUST ABLE.
Replacing headlamp bulbs W ARNING: Handle a halogen headlamp bulb carefully and keep out of children’ s reach. Grasp the bulb only by its plastic base and do not touch the glass. The oil from your hand could cause the bulb to break the next time the headlamps are operated.
Replacing front parking lamp/turn signal bulbs 1. Make sure that the headlamp control is in the off position. 2. Open the hood. 3. At the wheel well, remove the fasteners from the splash shield, then pull the splash shield back to gain access to the bulbs.
Replacing backup lamp bulbs 1. Make sure the headlamp switch is in the off position, then open the liftgate to expose the lamp assembly bolts. 2. Remove the two bolts from the lamp assembly . 3. Carefully remove the lamp assembly away from the vehicle by pulling the assembly straight out to expose the bulb socket.
Replacing license plate lamp bulbs 1. Make sure the headlamp switch is in the off position. 2. Remove the two screws and the license plate lamp assembly from the bumper . 3. Carefully pull the bulb straight out from the lamp assembly . 4. Install new bulb(s) in reverse order .
Function Number of Bulbs T rade Number Front row map lamp 2 1600XB Second row dome/reading lamp 3 211-2XB Rear courtesy lamp 1 211-2XB Visor vanity lamp 2 37 All replacement bulbs are clear in color except where noted. T o replace all instrument panel lights - see your authorized dealer .
GENERAL INFORMA TION Y our Ford or Lincoln authorized dealer has many quality products available to clean your vehicle and protect its finishes. CLEANING PRODUCTS For best results, use the following p.
• Note: Suntan lotions and insect repellents can damage any painted surface; if these substances come in contact with your vehicle, wash it off as soon as possible.
W AXING Regular waxing is necessary to protect the paint on your car from the elements. W e recommend that you wash and wax the painted surface once or twice a year . When washing and waxing, park your vehicle in a shaded area out of direct sunlight. Always wash your vehicle before applying wax.
• Spray Motorcraft Engine Shampoo and Degreaser on all parts that require cleaning and pressure rinse clean. In Canada, use Motorcraft Engine Shampoo. • Never wash or rinse the engine while it is hot or running; water in the running engine may cause internal damage.
CLEANING THE INTERIOR W ARNING: Do not use cleaning solvents, bleach or dye on the vehicle’ s safety belts, as these actions may weaken the belt webbing. W ARNING: On vehicles equipped with seat-mounted airbags, do not use chemical solvents or strong detergents.
• Be certain to wash or wipe your hands clean if you have been in contact with certain products, such as insect repellent and suntan lotion, in order to avoid possible damage to the interior painted surfaces. • Do not use household or glass cleaners as these may damage the finish of the instrument panel, interior trim and cluster lens.
CLEANING THE ALLOY WHEELS Note: Do not use chrome cleaner , metal cleaner or polish on wheels and wheel covers. A clearcoat paint finish coats aluminum wheels and wheel covers. In order to maintain their condition: • Clean weekly with Motorcraft Wheel and Tire Cleaner .
Body • W ash vehicle thoroughly to remove dirt, grease, oil, tar or mud from exterior surfaces, rear -wheel housing and underside of front fenders. • Periodically wash vehicles stored in exposed locations. • T ouch up raw or primed metal to prevent rust.
Brakes • Make sure brakes and parking brake are fully released. T ires • Maintain recommended air pressure. Miscellaneous • Make sure all linkages, cables, levers and pins under vehicle are covered with grease to prevent rust. • Move vehicles at least 25 feet (8 meters) every 15 days to lubricate working parts and prevent corrosion.
GENERAL INFORMA TION Important Information for P265/40R22 Low-profile Tires and Wheels If your vehicle is equipped with P265/40R22 tires, they are low-profile tires.
Study your owner’ s manual for specific information about equipment features, instructions for safe driving and additional precautions to reduce the risk of an accident or serious injury . All-Wheel Drive System (If Equipped) W ARNING: Do not become overconfident in the ability of all-wheel drive vehicles.
How Y our V ehicle Differs from Other V ehicles Crossover vehicles can differ from some other vehicles in a few noticeable ways. Y our vehicle may be: • Higher – to allow higher load carrying capacity . • Shorter – to give it the capability to approach inclines.
U.S. Department of T ransportation-T ire quality grades: The U.S. Department of T ransportation requires Ford Motor Company to give you the following information about tire grades exactly as the government has written it.
Glossary of Tire T erminology • T ire label: A label showing the OE (Original Equipment) tire sizes, recommended inflation pressure and the maximum weight the vehicle can carry .
INFORMA TION CONT AINED ON THE TIRE SIDEW ALL Both U.S. and Canada Federal regulations require tire manufacturers to place standardized information on the sidewall of all tires. This information identifies and describes the fundamental characteristics of the tire and also provides a U.
E. 15: Indicates the wheel or rim diameter in inches. If you change your wheel size, you will have to purchase new tires to match the new wheel diameter . F. 95: Indicates the tire’ s load index. It is an index that relates to how much weight a tire can carry .
H. U.S. DOT T ire Identification Number (TIN): This begins with the letters DOT and indicates that the tire meets all federal standards. The next two numbers or letters are the plant code designating where it was manufactured, the next two are the tire size code and the last four numbers represent the week and year the tire was built.
M. Maximum Inflation Pressure: Indicates the tire manufacturer’ s maximum permissible pressure or the pressure at which the maximum load can be carried by the tire.
Information on T T ype Tires T type tires have some additional information beyond those of P type tires. These differences are described below . T145/80D16 is an example of a tire size. Note: The temporary tire size for your vehicle may be different from this example.
INFLA TING YOUR TIRES Safe operation of your vehicle requires that your tires are properly inflated. Remember that a tire can lose up to half of its air pressure without appearing flat. Every day before you drive, check your tires. If one looks lower than the others, use a tire gauge to check pressure of all tires and adjust if required.
on the Safety Compliance Certification Label (affixed to either the door hinge pillar , door -latch post, or the door edge that meets the door -latch post, next to the driver’ s seating position), or T ire Label which is located on the B-Pillar or the edge of the driver’ s door .
6. Visually inspect the tires to make sure there are no nails or other objects embedded that could poke a hole in the tire and cause an air leak. 7. Check the sidewalls to make sure there are no gouges, cuts or bulges.
Damage Periodically inspect the tire treads and sidewalls for damage (such as bulges in the tread or sidewalls, cracks in the tread groove and separation in the tread or sidewall). If damage is observed or suspected, have the tire inspected by a tire professional.
Tire Replacement Requirements W ARNING: Only use replacement tires and wheels that are the same size, load index, speed rating and type (such as P-metric versus L T -metric or all-season versus all-terrain) as those originally provided by Ford.
W ARNING: T o reduce the risk of serious injury , when mounting replacement tires and wheels, you should not exceed the maximum pressure indicated on the sidewall of the tire to set the beads without additional precautions listed below . If the beads do not seat at the maximum pressure indicated, re-lubricate and try again.
Safety Practices W ARNING: If your vehicle is stuck in snow , mud, or sand, do not rapidly spin the tires. Spinning the tires can tear the tire and cause an explosion. A tire can explode in as little as three to five seconds. W ARNING: Do not spin the wheels at over 35 mph (56 km/h).
Tire Rotation Note: If your tires show uneven wear ask an authorized dealer to check for and correct any wheel misalignment, tire imbalance or mechanical problem involved before tire rotation. Note: Y our vehicle may be equipped with a dissimilar spare tire and wheel assembly .
The tires on your vehicle have all-weather treads to provide traction in rain and snow . However , in some climates, you may need to use snow tires and chains. Follow these guidelines when using snow tires and cable chains: • If possible, avoid fully loading your vehicle.
Accordingly , when the low tire pressure telltale illuminates, you should stop and check your tires as soon as possible, and inflate them to the proper pressure. Driving on a significantly under -inflated tire causes the tire to overheat and can lead to tire failure.
Changing Tires with a Tire Pressure Monitoring System Note: Each road tire is equipped with a tire pressure sensor located inside the tire and wheel assembly cavity . The pressure sensor is attached to the valve stem. The pressure sensor is covered by the tire and is not visible unless the tire is removed.
When Y ou Believe Y our System Is Not Operating Properly The main function of the tire pressure monitoring system is to warn you when your tires need air .
Low tire pressure warning light Possible cause Customer action required Flashing warning light Spare tire in use Repair the damaged road wheel and tire assembly and reinstall it on the vehicle to restore system function. For a description on how the system functions, see When Y our T emporary Spare T ire is Installed in this section.
CHANGING A ROAD WHEEL W ARNING: The use of tire sealants may damage your tire pressure monitoring system and should not be used. However , if you must use a sealant, have an authorized dealer install a new tire pressure monitoring system sensor and valve stem.
2. Full-size dissimilar spare with label on wheel: This spare tire has a label on the wheel that states: THIS TIRE AND WHEEL FOR TEMPORARY USE ONL Y When driving with one of the dissimilar spare tires listed above, do not: • exceed 50 mph (80 km/h).
• Ground clearance and parking at curbs • W inter weather driving capability • W et weather driving capability • All-wheel driving capability (if applicable) • Load leveling adjustment (if applicable) When driving with the full-size dissimilar spare tire and wheel assembly , additional caution should be given to: • towing a trailer .
W ARNING: Always use the jack provided as original equipment with your vehicle. If using a jack other than the one provided as original equipment with your vehicle, make sure the jack capacity is adequate for the vehicle weight, including any vehicle cargo or modifications.
9. The vehicle jacking points are shown here, and are depicted on the yellow warning label on the jack. Note: Jack at the specified locations to avoid damage to the vehicle. 10. Small arrow-shaped marks on the sills show the location of the jacking points.
Stowing the Flat/Spare Tire and Jack Note: If you are stowing a flat 22 inch tire and wheel assembly , temporarily remove the load floor , plastic stowage bins, and the foam load floor supports to make space. Place the 22 inch tire and wheel assembly in the spare tire well with the valve stem facing down.
Retighten the lug nuts to the specified torque within 100 miles (160 kilometers) after any wheel disturbance (such as rotation, flat tire, wheel removal). Lug nut socket size/Bolt size Wheel lug nut torque* ft-lb N • m 1 ⁄ 2 x 20 100 135 * T orque specifications are for nut and bolt threads free of dirt and rust.
ENGINE SPECIFICA TIONS Engine 3.7L V6 engine Cubic inches 227 Required fuel Minimum 87 octane Firing order 1–4–2–5–3–6 Ignition system Coil on plug Compression ratio 10.5:1 Spark plug gap 0.049–0.053 inch (1.25–1.35 mm) Engine drivebelt routing 1.
TECHNICAL SPECIFICA TIONS Item Capacity Ford part name Ford part number / Ford specification Brake fluid 1 Between MIN and MAX on reservoir Motorcraft High Performance DOT 4 L V Motor V ehicle Brake F.
Item Capacity Ford part name Ford part number / Ford specification Power T ransfer Unit (PTU) fluid (All-Wheel Drive) 9 12 ounces (0.35L) Motorcraft SAE 75W -140 Synthetic Rear Axle Lubricant XY -75W1.
Item Capacity Ford part name Ford part number / Ford specification 2 W e have designed your engine to use Motorcraft motor oils or equivalent oil brands that meet our specifications. Motor oils of the recommended viscosity grade that meet API SN requirements and display the API Certification Mark for gasoline engines are also acceptable.
Motorcraft part numbers Component 3.7L V6 engine Air filter element F A-1884 Battery BXT -65-650 Oil filter FL-500-S Spark plugs SP-520 1 Cabin air filter FP65 Seat air filter FS-104 W indshield wiper.
VEHICLE IDENTIFICA TION NUMBER The vehicle identification number is located on the driver’ s side instrument panel. Please note that in the graphic, XXXX is representative of your vehicle identification number . The V ehicle Identification Number (VIN) contains the following information: A.
VEHICLE CERTIFICA TION LABEL The National Highway T raffic Safety Administration Regulations require that a Safety Compliance Certification Label be affixed to a vehicle and prescribe where the Safety Compliance Certification Label may be located.
ACCESSORIES For a complete listing of the accessories that are available for your vehicle, please contact an authorized dealer or visit our online store at: www .
• Cargo area protector • Bumper protector • Wheel locks • Hitch-mounted parking sensors* • Car cover* *The accessory manufacturer designs, develops and therefore warrants Lincoln Licensed Accessories, and does not design or test these accessories to Lincoln Motor Company engineering requirements.
FORD ESP EXTENDED SERVICE PLANS PROTECT YOURSELF FROM THE RISING COST OF VEHICLE REP AIRS WITH A FORD EXTENDED SERVICE PLAN. SERVICE PLANS (U.S. only) More than 32 Million Ford and Lincoln owners have discovered the powerful protection Ford ESP .
Roadside Assistance Exclusive 24/7 roadside assistance, including: • T owing, flat-tire change and battery jump starts • Out of fuel and lock-out assistance • T ravel Expense reimbursement for l.
Interest Free Financing Options Available T ake advantage of our interest free installment payment plan. Just a 10% down payment will provide you with an affordable, no interest, no fee payment program.
GENERAL INFORMA TION Radio Frequencies and Reception Factors AM and FM frequencies are established by the Federal Communications Commission (FCC) and the Canadian Radio and T elecommunications Commission (CRTC). Those frequencies are: AM: 530, 540–1700, 1710 kHz FM: 87.
MP3 T rack and Folder Structure Audio systems capable of recognizing and playing MP3 individual tracks and folder structures work as follows: • There are two different modes for MP3 disc playback: MP3 track mode (system default) and MP3 folder mode.
AM/FM/CD PREMIUM AUDIO SYSTEM W ARNING: Driving while distracted can result in loss of vehicle control, crash and injury . W e strongly recommend that you use extreme caution when using any device that may take your focus off the road. Y our primary responsibility is the safe operation of your vehicle.
D. TUNE + and TUNE - : • In radio mode, press these buttons to manually search through the radio frequency band. • In Sirius mode, press these buttons to find the next or previous available satellite radio station.
INTRODUCTION W ARNING: Driving while distracted can result in loss of vehicle control, crash and injury . W e strongly recommend that you use extreme caution when using any device that may take your focus off the road. Y our primary responsibility is the safe operation of your vehicle.
This system uses a four -corner strategy to provide quick access several vehicle features and settings. The touchscreen provides easy interaction with your cellular phone, multimedia, climate control and navigation system. The corners display any active modes within those menus, such as phone status or the climate temperature.
SETTINGS Press to select any of the following: • Clock • Display • Sound • V ehicle • Settings • Help HOME Press to access your home screen. Depending on your vehicle’ s option package and software, your screens may vary in appearance from the descriptions in this section.
Using the T ouch-sensitive Controls on Y our System T o turn a feature on and off, just touch the graphic with your finger . T o get the best performance from the touch-sensitive controls, keep in mind: • Do not press hard on the controls. They are sensitive to light touch.
Support The SYNC support team is available to help you with any questions you cannot answer on your own. Monday-Saturday , 8:30am-9:00pm EST . Sunday , 10:30am-7:30pm EST . In the United States, call: 1–800–392–3673. In Canada, call: 1–800–565–3673.
Speed-restricted Features Some features of this system may be too difficult to use while your vehicle is moving so they are restricted from use unless your vehicle is stationary . • Screens that are too crowded with information, such as Point of Interest reviews and ratings, Sirius T ravel Link sports scores, movie times and ski conditions.
Privacy Information When a cellular phone is connected to SYNC, the system creates a profile within your vehicle that is linked to that cellular phone. This profile is created in order to offer you more cellular features and to operate more efficiently .
ACCESSING AND ADJUSTING MODES THROUGH YOUR RIGHT VEHICLE INFORMA TION DISPLA Y The display is located on the right side of your instrument cluster . Y ou can use your steering wheel controls to view and make minor adjustments to active modes without taking your hands off the wheel.
Note: If your vehicle is not equipped with Navigation, Compass appears in the display instead of Navigation. If you press the right arrow to go into the Compass menu, you can see the compass graphic. The compass displays the direction in which the vehicle is traveling, not true direction (i.
What Can I Say? T o access the available voice commands for the current session, do one of the following: • During a voice session, press the Help icon ( ? ) in the lower left status bar of the screen. • Say , “What can I say?” for an on-screen listing of the possible voice commands associated with your current voice session.
V oice command list “SD card list of commands” “Sirius satellite list of commands” ** “T ravel link list of commands” * “USB list of commands” “V oice instructions list of commands.
T o access these settings using voice commands: Press the voice icon. W ait for the prompt “Please say a command”. Another tone sounds to let you know the system is listening.
ENTERT AINMENT A. AM 1 and AM AST B. FM 1, FM 2 and FM AST C. SIRIUS D. CD E. USB F . T ouch this button to scroll down for more options, such as: • SD Card • BT Stereo • A/V In G. These buttons change with the media mode you are in. H. Radio memory presets and CD controls.
Browsing Device Content When listening to audio on a device, you can browse through other devices without having to change sources. For example, if you are currently listening to audio on an SD card, you can browse all the artists that are stored on your USB device.
device, then want to switch to a satellite radio channel, simply press the voice button on the steering wheel controls and say the name of the Sirius station (such as, “the Highway”).
Options Sound Settings allows you to adjust settings for: • Bass • Midrange • T reble • Balance and Fade • DSP (Digital Signal Processing) • Occupancy Mode • Speed Compensated V olume. Note: Y our vehicle may not have all these sound settings.
When HD Radio is on and you tune to a station broadcasting HD Radio technology , you may notice the following indicators on your screen: HD) logo blinks when acquiring a digital station and stays solid when digital audio is playing. When this logo is available, you may also see T itle and Artist fields on-screen.
HD Radio Reception and Station Troubleshooting Potential Reception Issues Reception area If you are listening to a multicast station and you are on the fringe of the reception area, the station may mute due to weak signal strength.
Potential station issues Issue Cause Action Sound fading or blending in and out. The radio is shifting between analog and digital audio. No action required. The reception issue may clear up as you continue to drive. There is an audio mute delay when selecting HD2 or HD3, multicast preset or Direct T une.
Radio V oice Commands If you are listening to the radio, press the voice button on the steering wheel control. When prompted, say any of the commands in the following chart. If you are not listening to the radio, press the voice button and, after the tone, say “Radio”, then any of the commands in the following chart.
Sirius Satellite Radio (If Activated) Press the lower left corner of the touchscreen, then select the SIRIUS tab. Presets Save a channel by pressing and holding one of the memory preset areas. There is a brief mute while the radio saves the channel. Sound returns when finished.
Set Category for Seek/Scan allows you to select a category of music you would like to search for . Y ou can then choose to either seek or scan for the stations playing that category . Parental Lockout allows you to lock and unlock channels, change or reset your PIN or unlock all channels.
Satellite Radio V oice Commands If you are listening to Sirius satellite radio, press the voice button on the steering wheel control. When prompted, say any of the commands in the following chart.
“TUNE” “SA T 2 preset <#>” “SA T 3” “SA T 3 preset <#>” “Help” Sirius Satellite Radio Information Note: Sirius reserves the unrestricted right to change, rearrange, add or delete programming including canceling, moving or adding particular channels, and its prices, at any time, with or without notice to you.
Potential satellite radio reception issues Station overload When you pass a ground-based broadcast-repeating tower , a stronger signal may overtake a weaker one and the audio system may mute. Satellite radio signal interference Y our display may show ACQUIRIN G.
Sirius troubleshooting tips Radio display Condition Possible action Updating. Update of channel programming in progress. No action required. The process may take up to three minutes. Call SIRIUS 1–888–539–7474. Y our satellite service is no longer available.
Options Sound Settings allows you to adjust settings for: • Bass • Midrange • T reble • Balance and Fade • DSP (Digital Signal Processing) • Occupancy Mode • Speed Compensated V olume. Note: Y our vehicle may not have all these sound settings.
SD Card Slot and USB Port SD Card Slot Note: Y our SD card slot is spring-loaded. T o remove the SD card, press the card in and the system ejects it. Do not attempt to pull the card to remove it as this could cause damage. Note: The navigation system also uses this card slot.
Playing Music from Y our Device Insert your device and select the SD Card or USB tab once the system recognizes it. Y ou can then select from the following options: Repeat replays the currently playing song or album. Shuffle plays music on the selected album or folder in random order .
SD Card and USB V oice Commands If you are listening to a USB device or an SD card, press the voice button on the steering wheel control. When prompted, say any of the commands in the following chart.
“BROWSE” “All artists” “Artist <name>” “All audiobooks” “Audiobook <name>” “All authors” “Author <name>” “All composers” “Composer <name>” .
Bluetooth Audio Y our system allows you to stream audio over your vehicle’ s speakers from your connected, Bluetooth-enabled cellular phone. T o access, press the lower left corner on the touchscreen, then select the BT Stereo tab.
Y our A/V inputs allow you to connect an auxiliary audio/video source (such as a gaming systems or a personal camcorder) by connecting RCA cords (not included) to these input jacks. The jacks are yellow , red and white and are located either behind a small access door on the instrument panel or in your center console.
Troubleshooting • Do not connect the audio input jack to a line level output. The jack only works correctly with devices that have a headphone output with a volume control.
Hands-free calling is one of the main features of SYNC. Once you pair your phone, you can access many options using the touchscreen or voice commands. While the system supports a variety of features, many are dependent on your cellular phone’ s functionality .
3. If you are prompted to enter a PIN on your device, it does not support Secure Simple Pairing. T o pair , enter the PIN displayed on the touchscreen. Skip the next step. 4. When prompted on your phone’ s display , confirm that the PIN provided by SYNC matches the PIN displayed on your cellular phone.
Receiving Calls During an incoming call, an audible tone sounds. Call information appears in the display if it is available. Accept the call by pressing Accept on the touchscreen or by pressing this phone button on your steering wheel controls.
Messaging Send text messages using your touchscreen. See T ext messaging later in this section. Settings T ouch this button to access various phone settings, such turning Bluetooth on and off, managing your phonebook and more. See Phone settings later in this section.
Y ou can then preview the message, verify the recipient as well as update the message list. Pre-defined text message options I’ll call you back in a few minutes. I just left, I’ll be there soon. Can you give me a call? I’m on my way . I’m running a few minutes late.
Phone Settings Press Phone > Settings. Bluetooth Devices T ouch this tab to connect, disconnect, add or delete a device, as well as save it as a favorite. Bluetooth T ouch this tab to turn Bluetooth off or on. Do Not Disturb T ouch this tab if you want all calls to go directly to your voice mail and not ring in the vehicle.
Phone V oice Commands Press the voice button on the steering wheel control. After the tone, say any of the following commands: “PHONE” “Call” “Join calls” * “Call <name>” “List.
INFORMA TION If your vehicle is equipped with Navigation, touch the i (Information) button to access these features. If your vehicle is not equipped with Navigation, touch the corner of the touchscreen with the green tab. Under the Information menu, you can access features, such as: A.
Note: The driver is ultimately responsible for the safe operation of the vehicle, and therefore, must evaluate whether it is safe to follow the suggested directions. Any navigation features are provided only as an aid. Make your driving decisions based on your observations of local conditions and existing traffic regulations.
Connecting to SYNC Services Using the T ouchscreen If your vehicle is equipped with Navigation, touch the i (Information) button to access these features. If your vehicle is not equipped with Navigation, touch the corner of the touchscreen with the green tab.
If you miss a turn, SYNC automatically asks if you want the route updated. Just say , “Y es” when prompted and the system delivers a new route to your vehicle. If your vehicle is equipped with Navigation, SYNC Services downloads your requested destination to the navigation system.
SYNC Services V oice Commands When a route has been downloaded (non-navigation systems), press the voice button on the steering wheel control. When prompted, say any of the following commands: “SER .
When you subscribe to Sirius T ravel Link, it can help you locate the best gas prices, find movie listings, get current traffic alerts, view the current weather map, get accurate ski conditions and see scores to current sports games. If your vehicle is equipped with Navigation, touch the i (Information) button to access these features.
Sirius Travel Link V oice Commands Note: In order to use Sirius T ravel Link, your vehicle must be equipped with navigation and your navigation SD card must be in the SD card slot.
“TRA VEL LINK” “College basketball schedule” “Motor sports order” “NHL schedule” “College basketball scores” “Motor sports schedule” “NHL scores” “College football headli.
91 1 Assist® (If Equipped) W ARNING: Unless the 911 Assist setting is set on before a crash, the system will not dial for help, which could delay response time, potentially increasing the risk of serious injury or death after a crash. W ARNING: Do not wait for 911 Assist to make an emergency call if you can do it yourself.
Setting 91 1 Assist On If your vehicle is equipped with Navigation, touch the i (Information) button to access these features. If your vehicle is not equipped with Navigation, touch the corner of the touchscreen with the green tab. Press Apps > 911 Assist, > On.
to provide your name, phone number and location immediately , because not all 911 systems are capable of receiving this information electronically . 91 1 Assist May Not Work If • Y our cellular phone or 911 Assist hardware sustains damage in a crash.
Note: In order to allow a break-in period for your vehicle, you may not be able to create a V ehicle Health Report until your vehicle odometer has reached 200 miles. Note: Cellular phone and SMS charges may apply when making a report. Register for V ehicle Health Report and set your report preferences at www .
SETTINGS A. Clock B. Display C. Sound D. V ehicle E. Settings F . Help Under this menu, you can set your clock, access and adjust the display , sound and vehicle settings as well as access settings for specific modes or the help feature. Clock Note: Y ou cannot manually set the date.
Y ou can also turn the outside air temperature display on and off. It appears at the top center of the touchscreen, next to the time and date. The system automatically saves any updates you make to the settings.
Sound Press the Settings icon > Sound, then select from the following: Sound Settings Bass DSP * Midrange Occupancy Mode * T reble Speed Compensated V olume Set Balance and Fade * If equipped.
Rear V iew Camera This menu allows you to access settings for your rear view camera. Press the Settings icon > V ehicle > Rear V iew Camera, then select from the following settings: • Rear Camera Delay • Visual Park Aid Alert • Guidelines.
System Keyboard Layout Have the touchscreen keyboard display in QWERTY or ABC format. Install Applications Install any downloaded applications or view the current software licenses. Master Reset Select to restore factory defaults. This erases all personal settings and personal data.
Media Player Press the Settings icon > Settings > Media Player , then select from the following: Media player Autoplay When this feature is on, the system automatically switches to the media source upon initial connection. This allows you to listen to music during the indexing process.
Navigation Press the Settings icon > Settings > Navigation, then select from the following: Navigation Map Preferences T urn breadcrumbs on and off. Have the system display your turn list top to bottom or bottom to top. T urn the Parking POI notification on and off.
Navigation T raffic Preferences Have the system display areas where roadwork occurs. Have the system display incident icons. Have the system display areas where difficult driving conditions may occur . Have the system display areas where snow and ice on the road may occur .
Phone Phone Ringer Select the type of notification for phone calls - ring tone, beep, text to speech, or have it be silent. T ext Message Notification Select the type of notification for text messages - alert tone, beep, text to speech, or have it be silent.
Wireless & Internet Y our system has a Wi-Fi feature that creates a wireless network within your vehicle, thereby allowing other devices (such as personal computers or phones) in your vehicle to speak to each other , share files or play games.
W ireless & Internet USB Mobile Broadband Instead of using W i-Fi, your system can also use a USB mobile broadband connection to access the internet. (Y ou must turn on your mobile broadband device on your personal computer before connecting it to the system.
Help Press the Settings icon > Help, then select from the following: Help Where Am I? View your vehicle’ s current location, if your vehicle is equipped with navigation. If your vehicle is not equipped with navigation, nothing displays. System Information T ouchscreen system serial number .
CLIMA TE Press the lower right corner on the touchscreen to access your climate control features. Depending on your vehicle line and option package, your climate screen may look different from the screen shown here. A. Power: T ouch to switch the system off and on.
F. A/C: T ouch to turn the air conditioning on or off. • Use with recirculated air to improve cooling performance and efficiency . • Engages automatically in MAX A/C, defrost and floor/defrost. G. AUTO: T ouch to engage automatic operation, then set the temperature using the temperature control.
Climate Control V oice Commands The following voice commands are available at the main menu level of a voice session. For example, press the voice button and after the prompt, “Say a command”; say.
Additional climate control voice commands “Off” “W indshield floor on” “On” “Help” “Panel floor on” * If you have said “T emperature”, you can say any of the commands in the following “T emperature” chart. “TEMPERA TURE” “High” “Low” “<15.
Destination selections Point of Interest Map Emergency Edit Route Cancel Route 1. Enter the necessary information into the highlighted text fields (in any order). For address destination entry , Go! appears once you enter all the necessary information.
Point of Interest (POI) Categories Y our system offers a variety of points of interest categories. Main categories Food/Drink & Dining Automotive T ravel & T ransportation Shopping Financial E.
cityseekr (If Available) Note: cityseekr point of interest information is limited to approximately 912 cities (881 in the United States, 20 in Canada and 11 in Mexico). cityseekr , when available, is a service that provides more information about certain points of interest such as restaurants, hotels and attractions.
This icon appears when your selection exists in multiple categories within the system. When you are viewing more information for hotels, cityseekr also tells you if the hotel has certain services and facilities using icons.
Route Preferences Preferred Route allows you to choose to have the system display the Shortest, Fastest or most Ecological route first. If you set Always Use Preferred Route to Ye s , the system uses the selected route type to calculate only one route to the desired destination.
Avoid Areas A void Areas allows you to choose areas which you want the system to avoid when calculating a route for you. Press Add to program an entry . Once you make a selection, the system tries to avoid the area(s) if possible for all routes. T o delete a selection, choose the listing on the screen.
3D map mode provides an elevated perspective of the map. This viewing angle can be adjusted and the map can be rotated 180 degrees by touching the map twice, and then dragging your finger along the shaded bar with arrows at the bottom of the map. Vi e w switches between full map, street list and exit view in route guidance.
Home indicates the location on the map currently stored as the home position. Y ou can only save one address from the Address Book as your Home entry . Y ou cannot change this icon. POI (Point Of Interest) icons indicate locations of any point of interest categories you choose to display on the map.
Save to Favorites T ouch this button to save the current location to your favorites. POI Icons T ouch this button to select icons to display on the map. Y ou can select up to three icons to display on the map at the same time. T urn these ON or OFF . Cancel Route T ouch this button to cancel the active route.
Navigation V oice Commands When in navigation mode, press the voice button on the steering wheel control. After the tone, say any of the following commands: Navigation system voice commands “Cancel .
“DESTINA TION” “Intersection” “Nearest <POI category>” “Nearest POI” “Play nametags” “POI category” “Previous destination” “Street address” “Help” “NA VIGA .
GENERAL INFORMA TION SYNC® End User License Agreement (EULA) • Y ou have acquired a device (“DEVICE”) that includes software licensed by FORD MOTOR COMP ANY from an affiliate of Microsoft Corporation (“MS”).
DESCRIPTION OF OTHER RIGHTS AND LIMIT A TIONS: • Speech Recognition: If the SOFTW ARE includes speech recognition component(s), you should understand that speech recognition is an inherently statistical process and that recognition errors are inherent in the process.
SOFTW ARE’ s ability to use WMDRM to play or copy protected content. This action does not affect unprotected content. When your DEVICE downloads licenses for protected content, you agree that Microsoft may include a revocation list with the licenses.
provided, then the terms of this EULA shall apply , except that the MS, Microsoft Corporation or affiliate entity providing the Supplemental Component(s) shall be the licensor of the Supplemental Component(s).
property rights in and to the content which may be accessed through use of the SOFTW ARE is the property of the respective content owner and may be protected by applicable copyright or other intellectual property laws and treaties. This EULA grants you no rights to use such content.
End user notice Microsoft® Windows® Mobile for Automotive Important Safety Information This system Ford SYNC™ contains software that is licensed to Manufacturer FORD MOTOR COMP ANY by an affiliate of Microsoft Corporation pursuant to a license agreement.
access a function of the system requiring prolonged attention. Even occasional short scans to the screen may be hazardous if your attention has been diverted away from your driving task at a critical time. V olume Setting Do not raise the volume excessively .
Emergency Services Do not rely on any navigation features included in the system to route you to emergency services. Ask local authorities or an emergency services operator for these locations. Not all emergency services such as police, fire stations, hospitals and clinics are likely to be contained in the map database for such navigation features.
2. Account Information Y ou agree: (a) when registering the T eleNav Software, to provide T eleNav with true, accurate, current, and complete information about yourself, and (b) to inform T eleNav promptly of any changes to such information, and to keep it true, accurate, current and complete.
Software. T eleNav also does not warrant the accuracy of the map or other data used for the T eleNav Software. Such data may not always reflect reality due to, among other things, road closures, construction, weather , new roads and other changing conditions.
6. Arbitration and Governing Law Y ou agree that any dispute, claim or controversy arising out of or relating to this Agreement or the T eleNav Software shall be settled by independent arbitration involving a neutral arbitrator and administered by the American Arbitration Association in the County of Santa Clara, California.
8.3 By using the T eleNav Software, you consent to receive from T eleNav all communications, including notices, agreements, legally required disclosures or other information in connection with the T eleNav Software (collectively , “Notices”) electronically .
The Data is provided for your personal, internal use only and may not be resold. It is protected by copyright, and is subject to the following terms (this “End User License Agreement”) and conditi.
Additional License Limitations: Except where you have been specifically licensed to do so by NT in a separate written agreement, and without limiting the preceding paragraph, your license is condition.
OR CONSEQUENTIAL DAMAGES ARISING OUT OF YOUR USE OF OR INABILITY TO USE THIS DA T A, ANY DEFECT IN THIS DA T A, OR THE BREACH OF THESE TERMS OR CONDITIONS, WHETHER IN AN ACTION IN CONTRACT OR TORT OR BASED ON A W ARRANTY , EVEN IF NT OR ITS LICENSORS HA VE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
furnished shall be marked and embedded as appropriate with the following “Notice of Use”, and be treated in accordance with such Notice: NOTICE OF USE CONTRACTOR (MANUF ACTURER/ SUPPLIER) NAME: NA VTEQ CONTRACTOR (MANUF ACTURER/SUPPLIER) ADDRESS: 425 W est Randolph Street, Chicago, IL 60606.
perform other functions. Y ou may use Gracenote Data only by means of the intended End User functions of this device This device may contain content belonging to Gracenote’ s providers.
CONTENT FROM THE COMP ANIES’ RESPECTIVE SERVERS OR, IN THE CASE OF GRACENOTE, CHANGE DA T A CA TEGORIES FOR ANY CAUSE THA T GRACENOTE DEEMS SUFFICIENT .
GENERAL MAINTENANCE INFORMA TION Why Maintain Y our V ehicle? Carefully following the maintenance schedule helps protect against major repair expenses resulting from neglect or inadequate maintenance and may help to increase the value of your vehicle when you sell or trade it.
Protecting Y our Investment Maintenance is an investment that will pay dividends in the form of improved reliability , durability and resale value. T o maintain the proper performance of your vehicle and its emission control systems, it is imperative that scheduled maintenance be completed at the designated intervals.
Oils, Fluids and Flushing In many cases, fluid discoloration is a normal operating characteristic and, by itself, does not necessarily indicate a concern or that the fluid needs to be changed.
Multi-point Inspection In order to keep your vehicle running right, it is important to have the systems on your vehicle checked regularly . This can help identify potential issues and prevent major problems.
430 Scheduled Maintenance 2014 MKX (mkx) Owners Guide gf, 1st Printing, November 2013 USA (fus).
NORMAL SCHEDULED MAINTENANCE AND LOG Intelligent Oil-Life Monitor® Y our vehicle is equipped with an Intelligent Oil-Life Monitor that determines when the engine oil needs to be changed based on how your vehicle is used.
Normal scheduled maintenance * At every oil change interval as indicated by the information display Change engine oil and filter . ** Rotate tires, inspect tire wear and measure tread depth. Perform multi-point inspection (recommended). Inspect automatic transmission fluid level (if equipped with dipstick).
Other maintenance items 1 Every 20000 miles (32000 km) Replace cabin air filter , or clean screen. Every 30000 miles (48000 km) Replace engine air filter . At 100000 miles (160000 km) Change engine coolant. 2 Every 100000 miles (160000 km) Replace spark plugs.
Maintenance Schedule Log D EALER V ALIDA TION : P&A C ODE : RO#: H OURS : D AT E :M ILEAGE : D EALER V ALIDA TION : P&A C ODE : RO#: H OURS : D AT E :M ILEAGE : D EALER V ALIDA TION : P&A .
D EALER V ALIDA TION : P&A C ODE : RO#: H OURS : D AT E :M ILEAGE : D EALER V ALIDA TION : P&A C ODE : RO#: H OURS : D AT E :M ILEAGE : D EALER V ALIDA TION : P&A C ODE : RO#: H OURS : D A.
D EALER V ALIDA TION : P&A C ODE : RO#: H OURS : D AT E :M ILEAGE : D EALER V ALIDA TION : P&A C ODE : RO#: H OURS : D AT E :M ILEAGE : D EALER V ALIDA TION : P&A C ODE : RO#: H OURS : D A.
SPECIAL OPERA TING CONDITIONS If you operate your vehicle primarily in any of the following conditions, you need to perform additional maintenance as indicated. If you occasionally operate your vehicle under any of these conditions, it is not necessary to perform the additional maintenance.
Extensive idling or low-speed driving for long distances as in heavy commercial use (such as delivery , taxi, patrol car or livery) As required Change engine oil and filter as indicated by the information display and perform services listed in the Normal Scheduled Maintenance chart.
Special Operating Condition Log D EALER V ALIDA TION : P&A C ODE : RO#: H OURS : D AT E :M ILEAGE : D EALER V ALIDA TION : P&A C ODE : RO#: H OURS : D AT E :M ILEAGE : D EALER V ALIDA TION : P.
D EALER V ALIDA TION : P&A C ODE : RO#: H OURS : D AT E :M ILEAGE : D EALER V ALIDA TION : P&A C ODE : RO#: H OURS : D AT E :M ILEAGE : D EALER V ALIDA TION : P&A C ODE : RO#: H OURS : D A.
EXCEPTIONS There are several exceptions to the Normal Schedule. They are listed below: Normal vehicle axle maintenance: Rear axles and power take-off units with synthetic fluid and light-duty trucks e.
Engine air filter & cabin air filter replacement: Engine air filter and cabin air filter life is dependent on exposure to dusty and dirty conditions. V ehicles operated in these conditions require frequent inspection and replacement of the engine air filter and cabin air filter .
911 Assist™ .............................. 377 A ABS (see Brakes) ..................... 174 Accessing and using your USB port ....................................355 Accessing your calendar ..........376 Accessory delay ..........................95 Adaptive Cruise Control .
C Capacities for refilling fluids .... 313 Cargo management system ...... 205 Cargo net ................................... 204 CD .............................................. 326 CD player .......................... 324, 353 CD voice commands .....
Emergency brake (see Parking brake) .................. 174 Emission control system ..........157 End user license agreement .... 408 Engine ........................................ 312 cleaning ................................... 275 coolant .........
I Ignition ....................................... 312 Illuminated visor mirror ....... 98–99 Information displays .................107 Inspection/maintenance (I/M) testing ........................................ 160 Instrument panel cleaning .....
O Octane rating ............................ 153 P Pairing other phones ................ 363 Pairing your phone ................... 362 Pairing your phone for the first time .................................... 362 Parental MyKey programming ... 63 Parking brake .
Belt-Minder®, deactivating/activating .............41 extension assembly ..................38 for adults ............................. 35–36 for children ...............................24 Occupant Classification Sensor .............................
T T emperature control (see Climate control) ....... 122, 393 T ext messaging ......................... 365 T ilt steering wheel ...................... 80 T ires ...........................284–285, 305 alignment ................................ 298 care .
Ein wichtiger Punkt beim Kauf des Geräts Lincoln MKX (2014) (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Lincoln MKX (2014) noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Lincoln MKX (2014) - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Lincoln MKX (2014) reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Lincoln MKX (2014) erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Lincoln MKX (2014) besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Lincoln MKX (2014) verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Lincoln MKX (2014). Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Lincoln MKX (2014) gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
