Benutzeranleitung / Produktwartung SICN 3356 des Produzenten Liebherr
Zur Seite of 75
Operating instructions Combined fridge-freezer for integrated use, door-on-door 140114 7085454 - 01 ICN/ SICN/ ICNP ... LP.
Contents 1 Appliance at a glance............................................ 2 1.1 Description of appliance and equipment.................. 2 1.2 Range of appliance use............................................ 2 1.3 Conformity......................
Use the appliance solely as is customary within a domestic environment. All other types of use are inadmissible. The appliance is not suitable for storing and cooling medicines, blood plasma, laboratory preparations or similar substances and products covered by the 2007/47/EC Medical Devices Directive.
leakage area. Ventilate the room well. Notify the after-sales service. - Do not store explosives or sprays using combustible propellants such as butane, propane, pentane, etc. in the appliance. To identify these spray cans, look for the list of contents printed on the can, or a flame symbol.
The following displays indicate malfunction. Possible causes and corrective action (see Malfunction). - F0 to F9 - FE * - The power failure symbol shines. 4 Putting into operation 4.1 Switching on the appliance Note u To switch on the entire appliance it is necessary only to switch on the freezer compartment.
u Store perishable food such as ready-to-serve dishes, meat products and sausages in the coldest zone. Place butter and preserves in the upper area and in the door (see Appli- ance at a glance). u Use recyclable plastic, metal, aluminium and glass containers and cling film for wrapping.
u The glass plate (1) with pull-out stops must be at the front so that the stops (3) face downwards. 5.4.7 Door racks Moving the storage rack Fig. 4 The boxes can be removed and placed on the table as a single unit. Either one or both the boxes can be used.
CAUTION Risk of injury due to broken glass! Bottles and cans containing drinks may burst when being frozen. This applies particularly to sparkling drinks.
5.5.8 Information system Fig. 8 (1) Ready meals, ice cream (4) Sausage, bread (2) Pork, fish (5) Game, mushrooms (3) Fruit, vegetables (6) Poultry, beef / veal The figures indicate the storage time in months for several types of frozen food in each case.
Note u The water reservoir has to be slid all the way into the bracket provided for the purpose in the refrigerator compartment! Setting the water intake time* The opening time of the IceMaker valve can be set to affect the size of the ice cubes produced.
u Using the Up setting button, freezer compartment Fig. 2 (11) / Down setting button, freezer compart- ment Fig. 2 (12) select Ic . u To confirm: press the SuperFrost button Fig. 2 (13) . w The IceMaker moves into the cleaning position and switches off.
The temperature display indicates power failure . The warmest temperature reached during the power failure appears in the temperature display. → The freezer temperature rose too high over the last hours or days due to a power failure or power interruption.
u Leave the door open to prevent odour. 9 Disposing of the appliance The appliance contains some reusable materials and should be disposed of properly - not simply with unsorted household refuse.
Liebherr Hausgeräte Ochsenhausen GmbH * Memminger Strasse 77-79 * 88416 Ochsenhausen * Deutschland * www.liebherr.com.
Removing the Memory Module(s) | 15 Removing the Memory Module(s) WARN ING: Before working inside your computer , read the safety information that shipped with your computer and follow the steps in " Before Y ou Begin" on page 7.
16 | Removing the Memory Module(s) 3 Use your fingertips to carefully spread ap art the securing clips on each end of the memory-module connector until t he memory module pops up. 4 Remove the memory module from the memory-module connect or . 1 securing clips (2) 2 memory-module conne ctor 3m e m o r y m o d u l e 1 3 2 OM_Book.
Replacing the Mem ory Module(s) | 17 Replacing the Memory Module(s) WARN ING: Before working inside your computer , read the safety information that shipped with your computer and follow the steps in " Before Y ou Begin" on page 7.
.
.
.
Replacing the Optical-Drive Assembly | 21 Replacing the Optical-Drive Assembly WARN ING: Before working inside your computer , read the safety information that shipped with your computer and follow the steps in " Before Y ou Begin" on page 7.
22 | Replacing the Optical-Drive Assembly OM_Book.book Page 22 Tuesday, November 20, 2012 12:43 PM.
Removing the Hard- Drive Assembly | 23 Removing the Hard- Drive Assembly WARN ING: Before working inside your computer , read the safety information that shipped with your computer and follow the steps in " Before Y ou Begin" on page 7.
.
Replacing the Hard-Drive Assembly | 25 Replacing the Hard- Drive Assembly WARN ING: Before working inside your computer , read the safety information that shipped with your computer and follow the steps in " Before Y ou Begin" on page 7.
26 | Replacing the Hard-Drive Assembly OM_Book.book Page 26 Tuesday, November 20, 2012 12:43 PM.
Removing the Keyboard | 27 Removi ng the Key board WARN ING: Before working inside your computer , read the safety information that shipped with your computer and follow the steps in " Before Y ou Begin" on page 7. After working inside your comput er , follow the instructions in " After Working Insid e Y our Computer" on page 9.
28 | Removing the Keyboard 3 Lift and slide the keyboard towards the display to release the keyboard fr om the palm-rest assembly. 4 T urn the keyboard over and place it on the palm-rest assembly. 5 Lift the connector latch and disconnect th e ke yboard from the connector on the system board.
Replacing the Keyboard | 29 Replacing th e Keyboard WARN ING: Before working inside your computer , read the safety information that shipped with your computer and follow the steps in " Before Y ou Begin" on page 7.
30 | Replacing the Keyboard OM_Book.book Page 30 Tuesday, November 20, 2012 12:43 PM.
.
32 | Removing the Palm-Rest 3 T urn the computer over and open the display as far as possible. 4 Lift the connector latches and pull the pu ll-tab to disconnect the touchpad cable and the power-button cable from the system board. 1 touchpad cable 2 power-button cable 3 connector latches (2) 1 2 3 OM_Book.
.
34 | Removing the Palm-Rest OM_Book.book Page 34 Tuesday, November 20, 2012 12:43 PM.
Replacing the Palm-Rest | 35 Replacing th e Palm-Rest WARN ING: Before working inside your computer , read the safety information that shipped with your computer and follow the steps in " Before Y ou Begin" on page 7.
36 | R e p l a c i n g t h e P a l m - R e s t OM_Book.book Page 36 Tuesday, November 20, 2012 12:43 PM.
.
38 | Removing the Wireless Mini-Card Procedure 1 Disconnect the antenna cables from the connectors on the wire less mini-card. 2 Remove the screw that secures the wireless mini -card to the system-board connector . 3 Slide and remove the wireless mini-card out of the system-board connector .
Replacing the Wireless Mini-Card | 39 Replacing the W ireless Mini-Card WARN ING: Before working inside your computer , read the safety information that shipped with your computer and follow the steps in " Before Y ou Begin" on page 7.
.
Removing the I/O Board | 41 Removing the I/O Board WARN ING: Before working inside your computer , read the safety information that shipped with your computer and follow the steps in " Before Y ou Begin" on page 7. After working inside your comput er , follow the instructions in " After Working Insid e Y our Computer" on page 9.
.
Replacing the I/O Board | 43 Replacing the I/O Board WARN ING: Before working inside your computer , read the safety information that shipped with your computer and follow the steps in " Before Y ou Begin" on page 7.
44 | Replacing the I/O Board OM_Book.book Page 44 Tuesday, November 20, 2012 12:43 PM.
Removing the System Board | 45 Removing the System Board WARN ING: Before working inside your computer , read the safety information that shipped with your computer and follow the steps in " Before Y ou Begin" on page 7.
46 | Removing the System Board Procedure 1 Peel the tape that secures the display cable to the system board. 2 Disconnect the display cable from t he connector on the system board. 3 Disconnect the power adapter -port cable, speaker cable, and the I/O board cable from the system board.
.
48 | Removing th e System Board OM_Book.book Page 48 Tuesday, November 20, 2012 12:43 PM.
Replacing the System Board | 49 Replacing the System Board WARN ING: Before working inside your computer , read the safety information that shipped with your computer and follow the steps in " Before Y ou Begin" on page 7.
50 | Replacing the System Board OM_Book.book Page 50 Tuesday, November 20, 2012 12:43 PM.
Removing the Coin-Cell Battery | 51 Removing the Coin-Cell Battery WARN ING: Before working inside your computer , read the safety information that shipped with your computer and follow the steps in " Before Y ou Begin" on page 7.
52 | Removing the Coin-Cell Battery Procedure 1 T urn the system board over and place it on a flat surface. 2 Using a plastic scribe, gently pry out the coin-cell b attery out of the battery socket on the system board. 1 plastic scribe 2 coin-cell battery 1 2 OM_Book.
Replacing the Coin-Cell Battery | 53 Replacing the Coin-Cell Batter y WARN ING: Before working inside your computer , read the safety information that shipped with your computer and follow the steps in " Before Y ou Begin" on page 7.
54 | Replacing the Coin-Cell Batt ery OM_Book.book Page 54 Tuesday, November 20, 2012 12:43 PM.
Removing the Heat- Sink | 55 Removing the Heat- Sink WARN ING: Before working inside your computer , read the safety information that shipped with your computer and follow the steps in " Before Y ou Begin" on page 7.
56 | Removing the Heat- Sink Procedure 1 T urn the system board over and place the system board on a flat surface. 2 In sequential or der (indicated on the heat-si nk), re move th e screws that se cure the heat-sink to the system board. 3 Lift the heat-sink off the system board.
Replacing the Heat- Sink | 57 Replacing the Heat- Sink WARN ING: Before working inside your computer , read the safety information that shipped with your computer and follow the steps in " Before Y ou Begin" on page 7.
58 | Replacing the Heat- Sink OM_Book.book Page 58 Tuesday, November 20, 2012 12:43 PM.
Removing the Fan | 59 Removing t he Fan WARN ING: Before working inside your computer , read the safety information that shipped with your computer and follow the steps in " Before Y ou Begin" on page 7. After working inside your comput er , follow the instructions in " After Working Insid e Y our Computer" on page 9.
60 | Removing the Fan Procedure 1 T urn the system board over and place the system board on a flat surface. 2 Disconnect the fan cable from the connector on the system board. 3 Remove the screw that secures the fan to the system board. 4 Lift the fan off the system board.
Replacing the Fan | 61 Replacing th e Fan WARN ING: Before working inside your computer , read the safety information that shipped with your computer and follow the steps in " Before Y ou Begin" on page 7. After working inside your comput er , follow the instructions in " After Working Insid e Y our Computer" on page 9.
.
Removing the Speakers | 63 Removing the Speak ers WARN ING: Before working inside your computer , read the safety information that shipped with your computer and follow the steps in " Before Y ou Begin" on page 7. After working inside your comput er , follow the instructions in " After Working Insid e Y our Computer" on page 9.
64 | Removing the Speakers Procedure 1 Peel the tape that secures the LED silicon tubes to the computer base. 2 Lift and remove the LED silicon tubes off the computer base.
Removing the Speakers | 65 3 Note the speaker cable routing and r emove the cable from the routing guides on the computer base. 4 Lift the speakers, along with the speaker cable, off the computer base. 1 speaker cable rou ting 2 speakers (2) 1 2 OM_Book.
66 | Removing the Speakers OM_Book.book Page 66 Tuesday, November 20, 2012 12:43 PM.
Replacing the Speakers | 67 Replacing the Speakers WARN ING: Before working inside your computer , read the safety information that shipped with your computer and follow the steps in " Before Y ou Begin" on page 7. After working inside your comput er , follow the instructions in " After Working Insid e Y our Computer" on page 9.
68 | Replacing the Speakers OM_Book.book Page 68 Tuesday, November 20, 2012 12:43 PM.
Removing the Display Assembly | 69 Removing the Display Assembly WARN ING: Before working inside your computer , read the safety information that shipped with your computer and follow the steps in " Before Y ou Begin" on page 7.
70 | Removing the Display Assembly Procedure 1 Peel the tape that secures the display cable to the system board. 2 Disconnect the display cable from t he connectors on the system board. 3 Disconnect the wireless mini -card ca bles from the connectors on the wireless mini-card.
.
72 | Removing the Display As sembly OM_Book.book Page 72 Tuesday, November 20, 2012 12:43 PM.
.
74 | Replacing the Display Assembly OM_Book.book Page 74 Tuesday, November 20, 2012 12:43 PM.
Removing the Display Bezel | 75 Removing the Display Bezel WARN ING: Before working inside your computer , read the safety information that shipped with your computer and follow the steps in " Before Y ou Begin" on page 7.
Ein wichtiger Punkt beim Kauf des Geräts Liebherr SICN 3356 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Liebherr SICN 3356 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Liebherr SICN 3356 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Liebherr SICN 3356 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Liebherr SICN 3356 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Liebherr SICN 3356 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Liebherr SICN 3356 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Liebherr SICN 3356. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Liebherr SICN 3356 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
