Benutzeranleitung / Produktwartung WD11020D des Produzenten LG
Zur Seite of 31
W ashing Machine OWNER'S MANUAL WD13020D WD12020D WD1 1020D Thank you for buying a LG Fully Automatic Washing machine. Please read your owner's manual carefully, it provides instructions on safe installation, use and maintenance. Retain it for future reference.
2 r oduct Featur es P ontents C Warnings ....................................................................................3 Specifications .............................................................................4 Installation .................
3 ar nings W For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, personal injury, or loss of life.
4 pecifications S Spanner Inlet hose(2EA) ■ Accessories ■ Name : Front loading washing machine ■ Power supply : 220-240V~,50Hz ■ Size : 600mm(W) 550mm(D) 850mm(H) ■ Weight/Max.Watt : 58kg / 2100W ■ Wash capacity : Refer to the Rating Label ■ Water consumption : 64 ℓ ■ Permissible water pressure : 1.
5 nstallation I 1 . To prevent internal damage during transport, the special 4 bolts are locked. Before operating the washer, remove the bolts along with the rubber bungs. • If they are not removed, it may cause heavy vibration, noise, malfunction and severe damage.
6 nstallation I Laundry Tub W asher approx. 2cm Drain Hose Installation place requirement Positioning Install the washer on a flat hard floor. Timber base and suspended type floors can cause excessive vibration and noise. Make sure that air circulation around the washer is not impeded by carpets,rug etc.
7 nstallation I Hot water tap Cold Hot Cold water tap ▶ Water supply pressure must be between 30kPa and 1.0-8 bar (100-800kpa) ▶ Don’t strip or crossthread when connecting Inlet hose to the valve. ▶ If the water supply pressure is more than 800kPa, a pressure reducing device device should be installed.
8 nstallation I Nor mal T ap without thread & scr ew type inlet hose Nor mal T ap without thread & one touch type inlet hose (Single inlet models) 1 . Unscrew the fixing screw to attach the tap. 2 . Push the connector up till the rubber packing is in tight contact with the tap.
9 nstallation I Installation of drain hose • The drain hose should not be placed higher than 100 cm above the floor. • Proper securing of the drain hose will protect the floor from damage due to water leakage. • do not force it back into the machine.
10 nstallation I Level adjustment Concrete floors Wooden floors (Suspended floors) 1. Adjusting the washing machine level properly prevents excessive noise and vibration. Install the appliance on a solid and level floor surface, preferably in a corner of the room.
11 ar e befor e washing C 1. Care Labels Look for a care label on your clothes. This will tell you about the fabric content of your garment and how it should be washed. 2. Sorting To get the best results, Sort clothes into loads that can be washed with the same wash cycle.
12 dding detergent A • Main wash only ➔ • Pre Wash + Main Wash ➔ • Do not exceed the maximum fill line. Close the dispenser drawer slowly. Overfilling can cause early dispensing of the fabric softener which could stain clothes. • Do not leave the fabric softener in the detergent drawer for more than 2 days.
13 dding detergent A • The detergent should be used according to the instruction of the detergent manufacture. • If too much detergent is used, too many suds can occur and this will decrease the washing result or cause heavy load to the motor. (Causing malfunctions) • If there are too many suds, the detergent quantity must be reduced.
14 unction F Recommended courses according to the laundry type ❋ Water Temperature : Select the water temperature to the wash cycles. Always follow garment manufacture ’ s care label or instructions when laundering. ❋ Medic Rinse : For a 40 degree final rinse water temperature, you can choose Medic Rinse option.
15 ow to use washer H • Press the Power button to start. • Press the Start/Pause button. • Initial conditions - Wash : main wash - Rinse : 3 times - Spin : • 1300 rpm [WD13020D] • 1200 rpm [WD12020D] • 1100 rpm [WD11020D] - Water temperature : 40˚C - Program : Cotton • Press the Power button to start.
16 ow to use washer H (1) Dial : Program (2) Button : Start / Pause (3) Button : Spin (4) Button : Temperature (5) Button : Power (6) Button : Medic Rinse (7) Button : Pre Wash (8) Button : Intensive (9) Button : Crease Care (10) Child Lock (11) Tub Clean (12) Button : Time Delay 1.
17 ow to use washer H Start/Pause Detecting • This Start/Pause button is used to start wash cycle or pause the wash cycle. • If temporary stop of wash cycle is needed, press the Start/Pause button. • When in Pause, the power is turned off automatically after 4 minutes.
18 ow to use washer H Child Lock If you choose to lock the buttons on the control assembly to prevent tampering this function may be selected. • Child Lock can be set by pressing the Medic Rinse button and Pre Wash button simultaneously.
19 ow to use washer H Spin [WD13020D] [WD12020D] [WD11020D] 2. No spin 3. Rinse Hold • Rinse Hold is selected by pressing the spin button repeatedly this function leaves clothes in the machine; suspended in the water after the final rinse without entering into spin.
20 ow to use washer H W ater T emp. • By pressing the Temp. button, the water temperature can be selected. - Cold - 30˚C / 40˚C / 60˚C / 95˚C • Water temperature can be selected according to the program. The required temperature lamp will light up for identification.
21 • If the machine encounters a fault during operation, the associated fault will be displayed. “ ” : Water pressure sensing error “ ” : Problem of overfilling water “ ” : Door is not c.
22 aintenance M The water inlet filter - " " error message will blink on the control panel when water does not enter the detergent drawer. - If water is very hard or contains traces of lime deposit, the water inlet filter may become clogged.
23 aintenance M 3 2 3 2 1 100 The drain pump filter ❋ The drain filter collects threads and small objects left in the laundry. Check regularly that the filter is clean to ensure smooth running of your machine. CAUTION First drain using the drain hose and then open the pump filter to remove any threads or objects.
24 aintenance M ■ Dispenser drawer ❋ After a while detergents and fabric softeners leave a deposit in the drawer. • It should be cleaned from time to time with a jet of running water. • If necessary it can be removed completely from the machine by pressing the catch downwards and by pulling it out.
25 aintenance M ■ Cleaning your washer 1. Exterior Proper care of your washer can extend its life. The outside of the machine can be cleaned with warm water and a neutral non abrasive household detergent. Immediately wipe off any spills. Wipe with damp cloth.
26 r oubleshooting guide ❋ This washing machine is equipped with automatic safety functions which detect and diagnose faults at an early stage and react appropriately When the machine does not function properly or does not function at all, check the following points before you contact your service provider.
27 Washer does not start Washer will not spin Door does not open Wash cycle time delayed • Electrical power cord may not be plugged in or connection may be loose. • House fuse blown, circuit breaker tripped,or a power outage has occurred. • Water supply tap is not turned on.
28 r oubleshooting guide Symptom Possible Cause Solution T • Water supply is not adequate in area. • Water supply taps are not completely open. • Water inlet hose(s) are kinked. • The filter of the inlet hose(s) are clogged. • Drain hose is kinked or clogged.
29 erms of W arranty T What Is Not Covered: • Service trips to your home to teach you how to use the product. • If the product is connected to any voltage other than that shown on the rating plate. • If the fault is caused by accident, neglect, misuse or Act of God.
30 emo M.
P/No.: MFL59755518.
Ein wichtiger Punkt beim Kauf des Geräts LG WD11020D (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie LG WD11020D noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für LG WD11020D - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von LG WD11020D reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über LG WD11020D erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon LG WD11020D besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von LG WD11020D verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit LG WD11020D. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei LG WD11020D gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
