Benutzeranleitung / Produktwartung 42LT770H des Produzenten LG
Zur Seite of 76
Automated Installation Routine Wizard pages 1 1 – 14 Custom Master TV Setup pages 15 – 18 Cloning Information pages 29 – 37 FTG Mode of Operation pages 38 – 39 E X P E R I E N C E D I N S TA L L E R Commercial Mode Setup Guide Note: Selected features shown in this guide may not be available on all models.
2 206-4214 MODEL and SERIAL NUMBER The model and serial numbers of this TV are located on the back of the cabinet. For future reference, LG suggests that you record those numbers here: Model No._________________ Serial No._______________ WA R N I N G : TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK).
3 206-4214 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water . 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accor- dance with the manufacturer ’s instructions.
4 206-4214 (Continued from previous page) 22. Outdoor Antenna Grounding If an outside antenna or cable system is connected to the product, follow the precautions below .
5 206-4214 T able of Contents Safety W arnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . 3 – 4 T able of Contents . . . . . . . . . . .
6 206-4214 Commercial Mode Overview This document describes how to set up L T770H Pro:Centric ® TVs for Commercial Mode operation. LG commercial TV functionality is based on “ownership” of the Ch.
7 206-4214 Commercial Mode Overview (Cont.) T ypical Installer Menu TV Setup Menus Installer Menu T o cre ate a Mast er TV Setup , you will need to kno w how to acc ess th e comme rcia l cont roll er (PT C) Inst all er Menu and mak e chan ges to the defau lt valu es as req uir ed.
8 206-4214 FTG Mode This mode enables Pro:Idiom ® decryption and also allows logical channel mapping of physical channels to remove the need for dash tuning. T V op erat ion in FTG Mod e is bas ed o n w hich ele men t of the T V o wns the FTG Lo gica l Ch anne l M ap—t he C PU or t he E BL.
9 206-4214 Pro:Centric Operation Pro:Centric TV Interactive Menu Features When running the Pro:Centric application, the interactive Pro:Centric TV enables guests to locate and select television entert.
10 206-4214 Pro:Centric Setup Administration and management options for the Pro:Centric server are described in detail in the Pro:Centric Server Admin Client User Guide .
1 1 206-4214 The Automated Installation Routine Wizard will appear on the screen each time the TV is turned ON, until one of its conguration methods has been completed or the wizard is exited.
12 206-4214 Automated Installation Routine Wizard (Cont.) Auto Co nfigura tion Proce ssing Pro:C entric Con figurat ion. Step 2 may tak e up to 15 min(s).
13 206-4214 Automated Installation Routine Wizard (Cont.) (Continued from previous page) RF Conguration a) In the Media T ype eld, use the Left/Right arrow keys to select RF .
14 206-4214 Automated Installation Routine Wizard (Cont.) USB Con figurat ion Co nf igu ri ng TV Ple ase wait ... 95% W arni ng - Do not re move the US B devi ce du ring this p roce ss Plea se selec t config urati on file (*. tlx) xxL T770H-UA 00001.T LX Acces sing USB St orage Dev ice OK Move Prev .
15 206-4214 Custom Master TV Setup Channel Auto Tuning (Channel Lineup) Manual Tuning Channel Edit Channel Label Picture Picture Mode Audio Auto V olume Clear V oice Sound Mode Balance TV Speaker Time.
16 206-4214 Custom Master TV Setup (Cont.) 2. Set Installer Menu items. This s tep pro vides s pecic i nstruct ion only on the Instal ler Menu items that s hould b e set o n a Mast er TV . Refer to pages 19 to 27 for de tailed inform ation o n all I nstaller Menu i tems.
17 206-4214 Use the TV setup menus to set the TV features to the desired configuration for the end user . PICT URE A UDIO INP UT OPT ION TIM E Sma rtSha re CHA NNE L L OCK Custom Master TV Setup (Cont.
18 206-4214 Custom Master TV Setup (Cont.) 6. (Optional) Add Custom Channel and Aux Input Labels: 2-5-4 + MENU Mode Note: 2-5-4 + MENU Mode enable s you to add/edit channe l icons and custo m text labels in the PTC once the Master TV Setup has been transf erred as described in the previ ous step.
19 206-4214 Installer Menu T ypical Installer Menu Use the Installer Menu to set up, change, or view operational settings. Refer to the table on pag es 21 an d 22 for brief descriptions of Installer Menu items. More detailed descriptions follow the table listing.
20 206-4214 Using the Installer Menu Refer to the table starting on the next page f or an ov erview of the a vailabl e Insta ller Men u items , includ ing the ir item numbers , funct ions, va lue ran ges, an d defaul t value s.
21 206-4214 Installer Menu (Cont.) Installer Menu Items 000 through 075 Menu Item Function V alue Range Default Value Brief Description of Function and Comments 000 INST ALLER SEQ 0 ~ 3 0 Leave default set to 0. 001 POWER MANAGE 0 ~ 7 0 Sets number of hours of no activity before automatic shutoff.
22 206-4214 Installer Menu Items 078 through 122 Menu Item Function V alue Range Default V alue Brief Description of Function and Comments 078 UPN MSB 0 ~ 255 0 User programmable number , most significant byte. 079 UPN MSB-1 0 ~ 255 0 User programmable number , most significant byte - 1.
23 206-4214 Installer Menu (Cont.) Detailed Descriptions of Installer Menu Items 000 - INST ALLER SEQUENCE Species entry sequence to the Installer Menu. 0 = 9876 1 = 4321 2 = 1478 3 = 3698 001 - POWER MANAGE (Power Management) Determines hours of no activity before automatic shutoff.
24 206-4214 Installer Menu (Cont.) 010 - MUTE DISABLE Enables or disables sound mute function. If set to 1, sound cannot be muted. If set to 0, sound can be muted.
25 206-4214 Installer Menu (Cont.) 047 - AUX ST A TUS Set to 1 for MPI Aux source to be reported as a channel number instead of channel 0. Set to 0 to disable Aux identication change.
26 206-4214 093 - RJP A V AILABLE (Remote Jack Pack A vailable) • 0 = Remote jack pack is not available or disabled. • 1 = Legacy Model RJPs: HDMI Mode Enables RJP feature for use with full cable bundle models. In this mode, when an HDMI source is connected to the RJP , both digital video and audio are expected via the HDMI cable.
27 206-4214 1 16 - VIDEO MUTE EN (Video Mute Enable) Set to 0 for Normal. Set to 1 for Blank. 1 17 - F ACT DEF AUL T (Factory Default) Set to 0 for normal.
28 206-4214 Channel Icons / Custom T ext Labels (2-5-4 + MENU Mode) Changing a Channel’ s Icon on the Master TV 1. Use Channel Up/Down to select the desired channel. 2. Use the Left/Right arrow keys to select the thin letter “ I ” on the Channel-T ime display .
29 206-4214 Cloning Overview IMPORT ANT CLONING INFORMA TION There are four different procedures for cloning a Master TV Setup, each with its own advantages and limitations (see also “Cloning Methods” on page 15): • Using a USB memory device / .
30 206-4214 USB Cloning Procedures Learning / T eaching a Master TV Setup using a USB Memory Device / .tlx File USB Cloning Notes • Re ad t he I MPOR T ANT CL ONIN G I NFOR MA TION on p age 29 b efo re b egin nin g an y cl oni ng p roce dure s.
31 206-4214 USB Cloning Procedures (Cont.) T each Master TV Setup to T arget TV 1. T urn ON the T arget TV . The next step depends on whether the Automated Installation Routine Wizard appears on the screen when you turn ON the TV : • If the wiz ard is disp laye d, the TV is already in the required factory default state.
32 206-4214 USB Cloning Procedures (Cont.) Learning / T eaching a Master TV Setup using a USB Memory Device / .tll File USB Cloning Notes • Read the IMPORT ANT CLONING INFORMA TION on page 29 before beginning any cloning procedures.
33 206-4214 T each Master TV Setup to T arget TV 1. T urn ON the T arget TV . The next step depends on whether the Automated Installation Routine Wizard appears on the screen when you turn ON the TV : • If the wiz ard is disp laye d, the TV is already in the required factory default state.
34 206-4214 Clone Programmer Cloning Procedures Learn Setup from Master TV 1. Ensure the Master TV is set up completely and in Pass-through Mode. 2. T une/set the TV to an analog channel or Aux input, and then, plug one end of the MPI cable into the TV MPI port.
35 206-4214 (Optional) Set the Clock Set the time on a Master TV’ s clock. (If the time has already been copied from a TV into the TLL-1 100A clone programm er , you can set the Master TV’ s clock by copying the time from the clone programmer .
36 206-4214 Learn Setup from Master TV 1. Ensure the Master TV is set up completely and in Pass-through Mode. 2. T une/set the TV to an analog channel or Aux input, and then plug one end of the MPI cable into the TV MPI port.
37 206-4214 Clone Programmer Cloning Procedures (Cont.) (Optional) Set the Clock Set the time on a Master TV’ s clock. (If the time has already been copied from a TV into the L T2002 clone programm er , you can set the Master TV’ s clock by copyin g the time from the clone programme r .
38 206-4214 FTG Mode of Operation Overview FTG Mode via CPU This mode provides the following features: • Logical channels mapped to either RF or IP delivered content. • Digital RF channel minor (program) numbers up to 999. • FTG Channel Map of up to 600 logical channels.
39 206-4214 FTG Mode of Operation Overview (Cont.) PICT URE A UDI O INP UT OPT ION TIM E Sma rtSh ar e CHA NNE L L OCK TV Setup Menus Shows that the TV is in Pass-through Mode . Function Menu Indicates the TV is not in Pass-through Mode . While the TV is in this mode, Installer Menu settings can be accessed as read-only .
40 206-4214 FTG Mode via CPU Creating an FTG Conguration File using the FTG File Manager This section describes how to create an FTG Conguration (.tlx) le that can be saved to a USB memory device. In order to enable Pro:Idiom decryption, it is recommended that you create an FTG Conguration le using the FTG File Manager .
41 206-4214 FTG Mode via CPU (Cont.) (Continued from previous page) Note: T o remo ve an ind ivid ual ite m from th e FTG Conf igu rati on List or the TV Setup Men u List, click on/ hig hlig ht the ite m to be remo ved, and then cli ck the Rem ove It em butt on dir ectl y above the appl icab le “Li st” win dow .
42 206-4214 T eaching FTG Conguration to a TV This section describes how to “T each” an FTG Conguration le from a USB memory device to a TV . Ensure you have completed the procedure on the previous page to create the FTG Conguration le before proceeding with the steps below .
43 206-4214 FTG Mode via CPU (Cont.) 1. T urn ON the TV , and then plug a USB memory device into the USB IN port on the TV . 2. Press MENU SETTINGS on the Installer Remote to display the TV setup menus (TV is in Pass-through Mode) or the Function Menu (TV is already in FTG Mode).
44 206-4214 FTG Mode via CPU (Cont.) T ypical Installer Menu Note: The Installer Menu header will vary depending on the TV you are setting up. Use Channel Menu options to run Auto T uning and edit the channel lineup, as necessary . Adjust the values for these Installer Menu items.
45 206-4214 FTG File Manager Utilities Overview Note: The data referenced in the FTG Conguration List is only a snap- shot of the current FTG Channel Map and FTG Installer Menu settings when copied to the list.
46 206-4214 FTG File Manager Utilities Overview (Cont.) FTG Channel Map Conguration Utility The FTG Channel Map Configuration Utility enables you to create, view , edit, and print a Logical Channel Map. PRINT MAP Click to display a printable FTG Channel Map Report.
47 206-4214 FTG File Manager Utilities Overview (Cont.) DELETE Click to remove highlighted channel from FTG Channel Map. ADD After defining a new Logical Channel, click to add channel to the FTG Channel Map. FTG Channel Map Editor The FTG Channel Map Editor shows a single Logical Channel’s data and the FTG Channel Map.
48 206-4214 FTG File Manager Utilities Overview (Cont.) CONFIGURA TION SETTINGS Select tabs for categories of Installer Menu items to set up TV . FTG Installer Menu Conguration Utility Notes: • The Pro:Centric tab enables you to set up Pro:Centric-specic parameters.
49 206-4214 IP Environment Setup The IP Enviro nment Menu enables you to set up the network feature s of the TV . With the exceptio n of Networ k Conne ction and Network Status setting s, the IP Envir.
50 206-4214 Netwo rk Connec tion Confi gure IP and DNS modes . Auto (DH CP) or Static OK Static DNS Mode 0 0 0 0 IP Mod e Auto (DH CP) IP Addre ss Subne t Mask Gatew ay 0 0 0 0 0 0 0 0 Static Auto (DH CP) DNS Serv er 0 0 0 0 IP Environment Setup (Cont.
51 206-4214 2. Fol low the on- scre en i nst ruct ions to com plet e t he a ppro pri ate net work co ngu rati on. Use the Ins tal ler Remo te n avi gate el ds and mak e e ntri es, etc.
52 206-4214 IP Environment Setup (Cont.) Audi o PTS Of fset Vi deo PTS Offse t PCR Of fse t IGMP V er sion 0 0 0 < > < > < > Close 2 < > IP Stream Control If necessary , due to.
53 206-4214 IP Environment Setup (Cont.) Pro:Centric Setup Pro:Centric options enable you to congure the TV with the appropriate settings to connect to the Pro:Centric server . Use the Up/Down arrow keys on the Installer Remote to navigate between elds.
54 206-4214 IP Conguration 1. In the Media T ype eld, use the Left/Right arrow keys to select IP . Note: If th e Media T ype ha s alrea dy been set in the Automat ed Inst allation Routin e Wizard , the speci ed valu e will be reec ted in this e ld.
55 206-4214 1. With the IP Environment Menu on display , use the arrow keys on the Installer Remote to select Media Share . Then, press OK . 2. In the Media Share pop-up window , use the Up/Down arrow.
56 206-4214 Remote Jack Pack Setup RJP A vailable? If you will use a Remote Jack Pack (RJP) in your system, set Installer Menu item 093 RJP A V AILABLE appropriately (for example, on a legacy model RJP: HDMI Mode, set RJP A V AILABLE to 001). See Installer Menu detailed descriptions for further information.
57 206-4214 Reference: Upgrading TV/PTC Software using a USB Memory Device Upgrading TV/PTC Software Before you begin, note that the software upgrade les must be stored in a folder named “LG_DTV” in the root directory of the USB memory device. Also, ensure the USB device has been formatted with F A T format.
58 206-4214 Re fe ren ce : Dow nl oa din g a Spl as h Sc ree n us ing a U SB Me mo ry De vi ce Splash Screen Image File Guidelines • The splash screen image may be either a baseline (not progressive) JPEG or a 24-bit (RGB 8 x 8 x 8) BMP . • A JPEG image should be no larger than 1 MB.
59 206-4214 Reference: Power Consumption Settings The following tables assume that Installer Menu item 1 18 POWER SA VINGS is set to 003 (default) and Installer Menu item 099 BACK LIGHTING is set as shown below (default value is 202).
60 206-4214 Reference: TV Aux Input Conguration DIRECT ACCESS T uning TV ENABLE MPI DA T A ST ART AUX SOURCE ASSIGN- MENT Installer Menu MPI DA T A ST A TUS TYPE 0x41 SOURCES ENABLED (R/W) DA T A S.
61 206-4214 Reference: b -LAN Setup & Overview A b -LAN enabled head end device, such as an LG FMA-LG101, broadcasts over the RF distribution system to communicate to multiple TVs. When the TV is first installed, it must be turned ON in order for its embedded b -LAN module to receive communication from the head end device.
62 206-4214 Reference: FTG Mode via EBL (Local Conguration) Laptop PC TV -LIN K CF G AUDI O IN (RGB /DVI ) SPE AKER OUT (8Ω) SER VICE ONL Y LAN AUX LA N 1. Install (if necessary) and launch the FTG Device Configuration Application (v5.0.0 or higher) on the PC that will be used to configure the EBL.
63 206-4214 Reference: RJP Model List & Input Auto-sensing Hierarchy RJP Input Auto-sensing Hierarchy Priority Video Audio 1st (Highest) Digital Video In Audio In (3.
64 206-4214 Thi s se cti on d escr ibes ho w to res tor e fa ctor y d efau lts eit her on a sin gle T V th at i s c urre ntly in Pas s-th roug h or FTG Mod e or on mult ipl e TVs that ar e cu rren tly in FTG Mod e. Note: If the TV(s) is/are currently in FTG Mode, restoring the factory defaults also resets the TV(s) to Pass-through Mode.
65 206-4214 Reference: TV Zone Restrictions The FTG Ch anne l Ma p Ed ito r in the FT G Fi le M ana ger’s FTG Cha nnel Map Con gu rati on U til ity enab les you to ass ign Zone res tri ctio ns t o c hann els tha t ma y be de emed uns uita ble for cer tai n lo cati ons, fo r exa mple , a hot el l obby .
66 206-4214 OPT ION OK Mov e > > • Caption : Off • Balloon Help : On • Set ID : 1 • Demo Mode : Off • Zone : 0 • TV Name : [TV] 207K JCZA9J 740 • Wi-Fi Screen Share Whe n the T V.
67 206-4214 RGB IN (P C) AN TE NN A/ CA BL E IN TV -LIN K CF G AUD IO IN (RG B/D VI) SPE AKE R OUT (8Ω ) SER VI CE ONL Y RE S ET UP D A TE RJP INTERF A CE GA ME CO NT RO L /MPI RS-2 32C (S ERV IC E & EX T POW ER ) VI DE O L/ MO NO - A U DI O- R A V IN L R 2 / DV I IN 1 (AR C) LA N OPT ICA L DIG IT AL .
68 206-4214 Reference: External Speaker Setup The four-contact SPEAKER OUT jack on the L T770H rear panel provides stereo speaker level signal outputs (left +, left -, right +, right -) for a pair of 8 ohm external speakers. Outputs are variable based on the internal speaker volume level.
69 206-4214 Reference: Installer Remote Control T ypical Key Functions CH VOL 1 2 3 4 5 6 7 8 0 9 P A G E Q.MENU CHAR/NUM FLASHBK EXIT OK GUIDE PORT AL TV DV D IN PU T MA RK CC TIMER MUTE INFO PIP PIPCH+ PIPCH - SWAP PIP INP UT SAP MENU SETTINGS abc def ghi jkl mno pqrs tuv wxyz .
70 206-4214 T roubleshooting General T roubleshooting Some Quick and Easy T ips for Resolving Problems Symptom Possible Cause(s) Possible Solution(s) Installation Cannot direct enter channel number . (TV in Pass-through Mode) Installer Menu item 028 CH.
71 206-4214 T roubleshooting (Cont.) T roubleshooting Flow Chart Controller Quick Check ST A TUS LED on PTC Board blinking? Plug into AC Power outlet. TV connected to AC Power? Bad TV Y es No No Y es Cycle the power by removing and reconnecting the AC Power cord.
72 206-4214 T roubleshooting (Cont.) Commercial Mode Check / FTG Operation T roubleshooting TV turned ON? Y es No Press POWER on Installer Remote. TV is not in Commercial Mode. Call T echnical Support for assistance. TV is in Commercial Mode. No On-screen menu display no longer toggles? Y es Press MENU repeatedly as if to access the Installer Menu.
73 206-4214 Cautio n: If the TV is in LodgeNet PPV Mode (check with the site administrator if you are not certain), do not connect a clone programmer to the GAME CONTROL/MPI port, as this will damage the clone programmer .
74 206-4214 Glossary of T erms Automated Installation Routine Wizard Lodging model TV conguration wizard that provides conguration options for Pro:Centric operation as well as an option for using a USB memory device to cong- ure a TV for FTG Mode via CPU.
75 206-4214 Document Revision History / Open Source Software Notice Open Source Software Notice Document Revision History Date Description September 2012 Revision A: New document October 2012 Revision B: Automated Installation Routine Wizard, IP Environment Menu, and Wi-Fi Screen Share updates Product documentation is available online at: www .
206-4214 Revision B © Copyright 2012 LG Electronics U.S.A., Inc. For Customer Support/Service, please call: 1-888-865-3026 www .LGsolutions.com Pro:Idiom is a registered trademark of Zenith Electronics LLC. Pro:Centric is a registered trademark of LG Electronics Inc.
Ein wichtiger Punkt beim Kauf des Geräts LG 42LT770H (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie LG 42LT770H noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für LG 42LT770H - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von LG 42LT770H reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über LG 42LT770H erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon LG 42LT770H besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von LG 42LT770H verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit LG 42LT770H. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei LG 42LT770H gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
