Benutzeranleitung / Produktwartung IPD-4300 des Produzenten Lenco
Zur Seite of 50
folder size: 105 x 14 mm USE 13 PCS 210 x 148.5mm T OT AL 52P AGES BLACK COLOUR PRINTING 80GMS BOOK P APER 5 IPD-4300 lenco ib v03 2010.03.06 User's Manual IPD-4300 DOCKING ST A TION FOR iPod For information and support www .
W arnings WARNING - T O REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO PREVENT ELECTRIC SHOCK, FULL Y INSER T THE POWER PL G INTO AC MAIN OUTLET . USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED MA Y RESUL T IN HAZARDOUS RADIA TION EXPOSURE.
Important Safety Instructions When used in the directed manner , this unit has been designed and manufactured to ensure your personal safety . However , improper use can result in potential electrical shock or fire hazards.
7 Description of Parts Main Unit T o p view Front view Thank you for purchasing this Digital Music Audio System, it incorporates following features : iPod iPod iPod iPod shuffle , mini, nano,iPod touch,iPod classic and are trademarks of Apple Computer Inc.
9 Listening to iPod 8 REMOTE CONTROL VOL+ VOL- 8 10 OK 1 7 6 4 7 9 6 3 5 2 11 1.Infrared T ransmitter 2.Standby button ---- T o turn the unit on and off 3.iPod Menu button 4.iPod OK button 5.iPod Play / Pause button 6.iPod Backward / Forward button 7.
- Do not subject the unit to excessive force, shock, dust or extreme temperature. - Do not tamper the internal components of the unit. - Clean your unit with a damp (never wet) cloth. Solvent or detergent should never be used. - Avoid leaving your unit in direct sunlight or in hot, humid or dusty places.
7 English I n t rod uc t ion 1. Control Panel 2. Zoom Ring 3. Focus Ring 4. Zoom Lens 5. IR Receivers Main Unit Product Overview 6. T ilt-Adjustment Feet 7.
8 I n t rod uc t ion Control Panel 1. Source 2. Menu 3. Enter 4. Re-Sync 5. Power 6. Four Directional Select Keys 7. On/Standby LED 8. Lamp Fail LED 9.
9 English I n t rod uc t ion Input / Output Connections 1. Service Connector 2. VGA/SCART Connector (PC Analog Signal/Component Video Input/HDTV/SCAR T) 3. Component Video Input Connectors 4. Composite Video Input Connector 5. HDMI 1 Connector 6. HDMI 2 Connector 7.
10 I n t rod uc t ion Remote Control 1. Power On 2. Power Off 3. 16:9 4. Native 5. Contrast 6. Overscan 7. Enter 8. Re-Sync 9. D-Sub Source 10. Video Source 1 1. HDMI 2 Source 12. YPbPr Source 13. HDMI 1 Source 14. Menu 15. Source 16. Source Lock 17. EdgeMask 18.
11 English I n stall ation SERVICE VGA/SCART/YPbPr Y VIDEO Pb Pr HDMI 1 HDMI 2 12V OUT E62405SP R MOLEX Connecting the Projector Connect to Computer/Notebook 1 3 1........................................................................................
12 I n stall ation Connect to Video Sources 1....................................................................................................Power Cord 2..............................................................................................
13 English I n stall ation Powering On the Projector 1. Remove the lens cap. 2. Securely connect the power cord and signal cable. When connected, the ON/ST ANDBY LED will turn Amber . 3. T urn on the lamp by pressing “ ” button either on the top of the projector or on the remote.
14 I n stall ation W arning Indicator When the “LAMP” indicator lights Red (“ON/ST ANDBY” indicator fl ashes Amber), the projector will automatically shut down.
15 English I n stall ation Adjusting the Projected Image Adjusting the Projector ’s Height The projector is equipped with elevator feet for adjusting the image height. 1. Locate the adjustable foot you wish to modify on the underside of the projector .
16 I n stall ation Adjusting the Projector ’s Zoom / Focus POWER ? Focus Ring Zoom Ring Y ou may turn the zoom ring to zoom in or out. T o focus the im- age, rotate the focus ring until the image is clear . The projector will focus at distances from 4.
17 English U s e r Con t ro l s Using the Control Panel Power Refer to the “Power On/Off the Projector” section on pages 13-14. RE-SYNC Automatically synchronize the projector to the input source. Enter Confi rm your item selection. SOURCE Press “SOURCE” to select an input signal.
18 U s e r Con t ro l s Lamp Remote Control Using the Remote Control Power On Refer to the “Power On” section on page 13. Power Off Refer to the “Power On/Off the Projector” section on page 14. Lamp Mode Increase the brightness of the image. (refer to page 33) Mode Select the display mode from Cinema, Bright, Photo, Reference and User .
19 English U s e r Con t ro l s Remote Control Lamp Using the Remote Control Enter Confi rm your item selection. Source Press “Source” to select an input signal. Re-sync Automatically synchronizes the projector to the input source. Menu Display or exit the on-screen display menus for projector .
20 U s e r Con t ro l s The Projector has multilingual On-screen Display menus that allow you to make image adjustments and change a variety of settings. The projector will automatically detect the source. How to operate 1. T o open the OSD menu, press “Menu” on the Remote Control or Projector Keypad.
21 English U s e r Con t ro l s Menu T ree * ( # ) “B/W Extension” can’t support when source is HDMI, analog or digital RGB via DVI port. (*) “Signal” is not supported when the source is HDMI or DVI-D. (**) “IRE” is only supported on NTSC signal.
22 U s e r Con t ro l s IMAGE Mode There are many factory presets optimized for various types of images. Cinema: For home theater . Bright: Maximum brightness input. Photo: Optimized for displaying photographic images. Reference: This mode is intended to reproduce, as close as possible, the image the way the movie director intended.
23 English U s e r Con t ro l s IMAGE Color Adjust a video image from black and white to fully saturated color . Press the to decrease the color saturation in the image. Press the to increase the color saturation in the image. T int Adjust the color balance of red and green.
24 U s e r Con t ro l s IMAGE | Advanced Noise Reduction The motion Adaptive Noise Reduction reduces the amount of visible noise interlaced signals. The range is from “0” to “10”. (0: Off) B/W Extension Black and White Extension can stretch the black and white levels to automatically increase the contrast of input image.
25 English U s e r Con t ro l s IMAGE | Advanced Gamma This allows you to set up gamma curve type. After the initial setup and fi ne tuning is completed, utilize the Gamma Adjustment steps to optimize your image output. Film: for home theater . Video: for video or TV source.
26 U s e r Con t ro l s DISPLA Y Format Use this function to choose your desired aspect ratio. 4:3: This format is for 4x3 input sources. 16:9: This format is for 16x9 input sources, like HDTV and DVD enhanced for Widescreen TV . Native: This format displays the original image without any scaling.
27 English U s e r Con t ro l s LBX format 16 : 9 format or 4 : 3 format Input Signal Display area Picture area Display on Screen Detail informations about LBX mode : 1. Some Letter-Box DVDs are not enhanced for 16x9 TVs. In this situation, the image will not look right when displayed in 16:9 mode.
28 U s e r Con t ro l s Overscan Overscan function removes the noise in a video image. Overscan the image to remove video encoding noise on the edge of video source. Edge Mask Press the to reduce the size of an image. Press the to magnify an image on the projection screen.
29 English U s e r Con t ro l s DISPLA Y “SuperWide“ is “Off“ as default. N ote N ote SuperWide SuperWide is a feature that uses a special 2.
30 U s e r Con t ro l s SYSTEM Menu Location Choose the menu location on the display screen. Projection Front-Projection This is the default selection. The image is projected straight on the screen. Rear-Desktop When selected, the image will appear reversed.
31 English U s e r Con t ro l s SYSTEM Image AI Image AI improves the contrast of the picture by optimizing the brightness of the lamp according to the picture content.
32 U s e r Con t ro l s SYSTEM T est Pattern Display a test pattern. There are Grid, White pattern and None. Background Color Use this feature to display a “Dark Blue”, “Black”, or “Gray” screen when no signal is available. 12V T rigger 12V trigger provides a standard trigger for motorized screens.
33 English U s e r Con t ro l s SYSTEM | Lamp Settings Lamp Hour Display the cumulative lamp operating time. Lamp Reminder Choose this function to show or to hide the warning message when the changing lamp message is displayed. The message will appear up 30 hours before suggested replacement of lamp.
34 U s e r Con t ro l s SETUP Language Choose the multilingual OSD menu. Press or into the sub menu and then use the or key to select your preferred language. Press “Select (Enter)” to fi nalize the selection. Input Source Use this option to enable / disable input sources.
35 English U s e r Con t ro l s Source Lock When this function is turned off, the projector will search for other signals if the current input signal is lost. When this function is turned on, it will search for a specifi ed connection port. High Altitude Choose “On” to turn on High Altitude mode.
36 U s e r Con t ro l s Signal Phase: Change the display data frequency to match the frequency of your computer ’s graphic card. When you experience a vertical fl ickering bar , use this function to make an adjustment. T racking: Synchronize the signal timing of the display with the graphics card.
37 English U s e r Con t ro l s Signal White Level: Allow user adjust White Level when inputting S-Video or V ideo/CVBS signals. Black Level: Allow user adjust Black Level when inputting S-Video or V ideo/CVBS signals. Saturation: Adjust a video image from black and white to fully saturated color .
38 A p p e nd ices Image Problems No image appears on-screen Ensure all the cables and power connections are correctly and securely connected as described in the “Installation” section. Ensure all the pins of connectors are not bent or broken.
39 English A p p e nd ices Image is too small or too large Adjust the Zoom Ring on the top of the projector . Move the projector closer to or further from the screen. Press “Menu” button on the remote control or projector panel, go to “Display Format” and try the different settings.
40 A p p e nd ices Projector Status Indication LED lighting message Message ON/STANDBY LED Temp-LED Lamp-LED (Green/Amber) (Red) (Red) Standby State (Input power cord) Amber Power on (W arming) Flashing Green Lamp lighting Green Power off (Cooling) Flashing Green Error (Over T emp.
41 English A p p e nd ices On Screen Messages Fan failed: The projector will switch off automatically . Over temperature: The projector will switch off automatically . Replacing the lamp: Lamp is approaching the end of it’s rated life. Replcement suggested.
42 A p p e nd ices Replacing the lamp The projector automatically detects the lamp life. When the lamp life is nearing the end of use, you will receive a warning message. When you see this message, please contact your local reseller or service center to change the lamp as soon as possible.
43 English A p p e nd ices Lamp Replacement Procedure: 1. Switch off the power to the projector by pressing the “ ” button. 2. Allow the projector to cool down for at least 30 minutes. 3. Disconnect the power cord. 4. Unscrew the two screws on the cover .
44 A p p e nd ices Compatibility Modes Computer Compatibility For widescreen resolution (WXGA), the compatibility support is dependent on Notebook/PC models.
45 English A p p e nd ices Video Compatibility NTSC M (3.58MHz), 4.43 MHz P AL B, D, G, H, I, M, N SECAM B, D, G, K, K1, L SDTV/HDTV 480i/p, 576i/p, 720p@50Hz/60Hz, 1080i/p@50Hz/60Hz.
46 A p p e nd ices Please note that damage resulting from incorrect installation will invalidate the warranty . Ceiling Mount Installation 1. T o prevent damage to your projector , please use the Optoma ceiling mount.
47 English A p p e nd ices Optoma Global Offi ces For service or support please contact your local offi ce. USA 715 Sycamore Drive T el : 408-383-3700 Milpitas, CA 95035, USA Fax: 408-383-3702 www .optomausa.com Service : services@optoma.com Canada 5630 Kennedy Road, Mississauga, T el : 905-361-2582 ON, L4Z 2A9, Canada Fax: 905-361-2581 www .
48 A p p e nd ices Korea WOOMI TECH.CO.,L TD. 4F ,Minu Bldg.33-14, Kangnam-Ku, T el : +82+2+34430004 seoul,135-815, KOREA Fax: +82+2+34430005 Japan 東京都足立区綾瀬 3-25-18 株式会社オーエスエム E-mail : info@osscreen.com サポートセンター : 0120-46-5040 www .
49 English A p p e nd ices Regulation & Safety notices This appendix lists the general notices of your projector . FCC notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules.
50 A p p e nd ices Operation conditions This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference and 2. This device must accept any interference received, including interference that may cause undesired operation.
Ein wichtiger Punkt beim Kauf des Geräts Lenco IPD-4300 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Lenco IPD-4300 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Lenco IPD-4300 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Lenco IPD-4300 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Lenco IPD-4300 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Lenco IPD-4300 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Lenco IPD-4300 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Lenco IPD-4300. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Lenco IPD-4300 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
