Benutzeranleitung / Produktwartung WS-7138U des Produzenten La Crosse Technology
Zur Seite of 23
WS-7138U Wireless 433 MHz Wireless Weather Station Instruction Manual.
2 TABLE OF CONTENTS Topic Page Inventory of Contents/ Additional Equipm ent 3 Quick Set-Up Guide 4 Detailed Set-Up Guide Battery installation 5 Program Mode Program Sequence and Default Settin gs 6 Fu.
3 INVENTORY OF CONTENTS 1. The indoor weather station (Figure 1). 2. One remote temperature/humidity se nsor with mounting bracket (Figure 2). 3. Three each, ½” Philips screws. 4. One strip double-sided adhesive tape. 5. Instruction manual and warranty card.
4 QUICK SET-UP GUIDE Hint: Use good quality Alkaline Batteri es and avoid rechargeable batteries. 1. Have the indoor weather station and rem ote tem perature/humidi ty sensor 3 to 5 feet apart. 2. Batteries should be out of both units for 10 m inutes.
5 DETAILED SET-UP GUIDE I. BATTERY INSTALLATION A. REMOTE TEMPERATURE/HUMIDITY SENSOR 1. Remove the remote temperature/humidity sensor from the m ounting bracket. 2. Remove the screw from the back of the remote temperature/humidity sensor that secures the battery cover door.
6 seconds, and reinstall making sure to inst all batteries int o the remote temperature/humidi ty sensor first. PROGRAM MODE Programming Note: If 30 seconds is allowed to pass, or the IN/OUT, SET/CH b.
7 II. FUNCTION KEYS The function buttons are located di r ectly below the LCD d isp lay. The function of each button is as described below: • IN/OUT, SET/CH o Press for approximately three seconds to enter the setting m ode.
8 III. SELECTING ° F OR ° C 1. Press and hold the IN/OUT, SET/CH button for 3 seconds. 2. Either ” ° F” or “ ° C” will flash in the time/date LCD. 3. Press and release the MIN/MAX, + button to select the temperature format. 4. Press and release the IN/OUT, SET/CH button to confi rm and advance to the 12hr/24hr time display setting.
9 5. Press and release the MIN/MAX, + button to select 12 or 24-hour time format. Note: When in the 12-hour format “P .M.” will appear to the left of the hour in the tim e LCD between the hours of noon and midnight . 6. Press and release the IN/OUT, SET/CH button to confi rm and advance to the time setting.
10 VI. SETTING THE YEAR, DATE AND MONTH 1. Press and hold the IN/OUT, SET/CH button for 3 seconds. 2. Either ” ° F” or “ ° C” will flash in the time/date LCD. 3. Press and release the IN/OUT, SET/CH button four ti mes. 4. The year will flash in the time/date LCD.
11 11. Press and release the IN/OUT, SET/CH b utton to conf irm the settings and exit th e setting mode. FEATURES OF THE WS-7138U I. INDOOR TEMPERATURE, HUMIDITY, AND COMFORT LEVEL INDICATOR • The c.
12 II. OUTDOOR TEMPERATURE AND HUMIDITY • The temperature received from th e rem ote temperature/humidity sensor is displayed i n the TEMPERATURE/HUMIDITY portion of the LCD. o The current outdoor humi dity is also di splayed in the bar graph at the top of the LCD.
13 1. Press the MIN/MAX/ + button once. 2. The display will now show the Date an d Month at the bo tto m of the LCD. 3. Press and release the MIN/MAX/ + button. 4. “MAX” appears above the temperature and t he temperature flashes. a. The time of the maximum temperature reading is displayed in the time/date po rtion of the LCD .
14 18. “MIN” remains above the temperature and the hum idity and bar graph remain flashi ng a. The date of the minimum humidity reading is display ed in the time/ date portion o f the LCD 19. Press and release the MIN/MAX/ + button to exit t he indoor MIN/MAX m ode.
15 8. “MIN” appears above the temperature and t he temperature flashes. a. The time of the minimum temperature reading is displayed in the time/ date po r tion of the LCD . 9. Press and release the MIN/MAX/ + button. 10. “MIN” remains above the tem perature and the tem perature remains flashing.
16 IV. ADDING REMOTE TEMPERATURE/HUMIDITY SENSORS (OPTIONAL) The WS-7138U is able to receive signals from 2 different remote temperature/hum idity sensors. The rem ote temperature/humidity sensor model(s) that you choose will come w ith their own set of instructions— follow these instructio n s for a complete guide to setting up .
17 5. Install batt eries into the indoor weather stat ion. 6. Follow the Detailed Set-Up Guide for prog ramming and operating instructions. B. VIEWING AND OPERATING WITH MULTIPLE REMOTE TEMPERATURE SENSOR UNITS 1. To view the temperature of a different remote temperature/humidity sensor unit, press and release the IN/OUT, SET/CH button.
18 humidity reading in th e temperature/ humidity portio n of the LCD with in 4 minutes of set ting up. I. THE REMOTE TEMPERATURE/HUMIDITY SENSOR The remote tem perature/humi dity sensor can be m ounted in three ways: • Mounting with screws • Mounting with adhesive t ape • Using the bracket as a stand A.
19 5. Position the remote temperature/humidity senso r in the desired location, ensuring t hat the indoor weather station can receive the signal. C. MOUNTING USING THE STAND The mounting bracket can be us ed as a stand by simply attaching the bracket to the bottom of the tem perature/ humidity sensor.
20 4. Gently pull t he indoor weather station down t o lock the screw into place. TROUBLESHOOTING NOTE: For problems not solved, please contact La Crosse Technology. Problem: The LCD is faint Solution: Replace the batteries Problem: No outdoor temperature/ humidity is displayed.
21 • Do not submerge in wat er. • Immediately rem ove all low powered batteries to avoid leakage and damage. • Opening th e casings invalidates the warranty. Do not try to repair the unit. Contact La Crosse Technology for repairs. SPECIFICATIONS Temperature measuring range: Indoor: 14.
22 WA RRA NTY INFORMATION La Crosse Technology, Ltd provides a 1-y ear limited w arranty on this product against manufacturing defects in ma terials and workmanship. This limited warranty begins on the original dat e of purchase, is valid only on products purchased and used in North America and only to the original purchaser of this product.
23 PUBLIC INFORMATION. THIS PRO DUCT IS NOT A T OY. KEEP OUT OF CHILDREN’S REACH. This warranty gives y ou specific legal rights. You may also have other rights specific to your State. Some States do no allo w the exclusion of c onsequential or incidental damages therefore the above exclusion of limitation may not apply to y ou.
Ein wichtiger Punkt beim Kauf des Geräts La Crosse Technology WS-7138U (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie La Crosse Technology WS-7138U noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für La Crosse Technology WS-7138U - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von La Crosse Technology WS-7138U reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über La Crosse Technology WS-7138U erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon La Crosse Technology WS-7138U besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von La Crosse Technology WS-7138U verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit La Crosse Technology WS-7138U. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei La Crosse Technology WS-7138U gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
