Benutzeranleitung / Produktwartung WS-7078TWC des Produzenten La Crosse Technology
Zur Seite of 23
WS-7078UF Wireless 433 MHz Radio-controlled Weather Station Instruction Manual.
2 TABLE OF CONTENTS Topic Page Inventory of Contents/Additional Equipment 3 About WWVB 4 Quick Set-Up Guide 5 Detailed Set-Up Guide Battery Installation 6 Program Mode Function Keys 7 12/24 hour Time .
3 INVENTORY OF CONTENTS 1. The indoor weather station (Fi gure 1). 2. One TX4U remote therm o/hygro sensor with m ounting bracket (Figure 2). 3. Three each, ½” Philips screws. 4. One strip double-sided adhesive t ape. 5. Instruction m anual and warranty card.
4 continually measuring every second, of every day, to an accuracy of ten billionths of a second per day. These physicists have created an i nternational standard, measuring a second as 9,192,631,770 vibrations of a Cesium-133 at om in a vacuum. For more informat ion about WWVB please see the NIST website at http://www.
5 Note: The Thermo Hygro Transmitter transmits a signal every 3 minutes; after the batteries ha ve been installed, th e Weather Station will search for the signal for a duration of 5 minutes.
6 the time signal (reception is achieved ea siest at night), it will display the correct time (factory setting is Ea stern time zone). PROGRAM MODE Programming Note: If 30 seconds is allowed to pass, .
7 2. Press and release the “CH” button to toggle between 12 and 24-hour time. 3. Press and release the “SET” button to confirm the 12/24-hour time setting and to advan ce to Time Zone Setting. B. Time Zone Setting The default tim e zone is EST, “-5hr ” (Eastern Standard Time), to change this setting : 1.
8 5. Press and release the “SET” button to confirm your selection and advance to the Daylight Savi ng Time setti ng. C. Daylight Saving Time(DST) Setting 1. Press and hold the “SET” button for 3 seconds or until “12h” or “24h” flashes in the DATE LCD.
9 WWVB search every night between these hours and overrides any manually set time. The WW VB tower icon (ap pearing in the TIME LCD) will flash when a signal-search is in progress, will remain steady when the signal has been received, and nothing will be displayed in all o ther situations.
10 for the year. The day, date, and year w ill be automatically set once the WWVB signal is received. However, the day, date, and year can be manually set and will flash resp ectively in the DATE LCD during manual programmi ng. 1. Press and hold the “SET” button for 3 seconds, or until “12h” or “24h” flashes in the DATE LCD.
11 G. Setting the LCD Contrast Note: There are 8 LCD contrast levels to choose from, “Lcd 0” is the lightest and “Lcd 7” is the darkest. 1. Press and hold the “SET” button for 3 seconds or until “12h” or “24h” flashes in the DATE LCD.
12 I. Weather Forecast The weather forecasting feature is estimated to be 75% accurate. The weather forecast is based solely upon th e change of air pressure over time.
13 Sunny —indicates that the weather is expected to improve (not that the weather will be sun n y). Sun with Clouds —indicates that the weather is expected to be fair (not that the weather will be sunny with clouds). Clouds with Rain —indicates that the weather is expected to get worse (not that the weath er will be rainy).
14 The outdoor temperat ure and humidity i s viewed in the OUTDOOR LCD. When there is more than one remote thermo/hygro sensor unit in operation a “boxed” number will appear to the right of the temperature. This indicates which remote thermo/hygro sen sor unit (1, 2, or 3) is currently displaying its dat a in the OUTDOOR LCD.
15 Note: Waiting 20 seconds during either the m inim um or the maximum readings will automatica lly return the indoor weather station to the current t emperature and humi dity readings.
16 1. Press and hold the “AL1” button for 5 seconds or until the alarm-time display fl ashes in the DATE LCD. 2. Press and release the “IN” button to set the alarm hours.
17 The WS-7078UF is able to receive si gnals from as many as 3 different remote thermo/hygro sensors. The remote sensor model(s) that you choose will come with their own set o f instructions, follo w these instructions fo r a complete guide to setting up .
18 by the “boxed” number), then press and release the “OUT” button. 3. Pressing and releasing the “OUT” button once will display the minim um tem perature and the date and tim e the data was recorded.
19 3. Through the 2 screw holes of the bracket mark the m ounting surface with a pencil. 4. Where marked, start the screw hol es using the provided screws. 5. Remove screws from the m ounting surface. 6. Align the m ounting bracket with the start ed screw holes.
20 1. Using the Table Stand a. The indoor weather station comes wit h the table stand already mounted. If you wish to use the table-st and all that is requi red is to place the indoor weather station in an appropriate location. 2. WALL MOUNTING a. Remove the table-st and.
21 2) Place remote thermo/hygro sensor closer to display. 3) Be sure all batteries are fresh. NOTE: For problems not solved, please contact La Crosse Technology. MAINTENANCE AND CARE INSTRUCTIONS • Extreme tem peratures, vibration, and shock should be avoided to prevent damage to the units.
22 Sensor): Outdoor Temperature and humidity reception (Indoor Weather Station) : Every 3 minut es. Transmission Range: 80 feet (in open space). Power Supply: Indoor Weather Station: 2 x AA, IEC LR6, 1.5V. Remote Therm o/hygro Sensor: 2 x AA, IEC LR3, 1.
23 This warranty gives you specific le gal rights. You may also have other rights specific to your State. So me States do no allow the exclusion of consequential or incidental dam ages therefore the above exclusion of lim itation m ay not apply t o you.
Ein wichtiger Punkt beim Kauf des Geräts La Crosse Technology WS-7078TWC (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie La Crosse Technology WS-7078TWC noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für La Crosse Technology WS-7078TWC - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von La Crosse Technology WS-7078TWC reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über La Crosse Technology WS-7078TWC erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon La Crosse Technology WS-7078TWC besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von La Crosse Technology WS-7078TWC verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit La Crosse Technology WS-7078TWC. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei La Crosse Technology WS-7078TWC gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
