Benutzeranleitung / Produktwartung FS-C8026N des Produzenten Kyocera
Zur Seite of 157
FS-C8026N Operation Guide Color P age Printer.
i Safety Notes Please read the Operation Guide before using the printer . Keep it close to the printer for easy reference. The sections of this guide and parts of the printer marked with symbols are safety warnings meant to protect the user, other individuals and sur rounding objects, and ensure corr ect and safe usage of the printer .
ii Caution NO LIABILITY IS ASSUME D FOR ANY DAMAGE CAUSED BY IMPROPER INST ALLA TION. Notice on Software SOFTW ARE USED WITH THIS PRINTER MUST SUPPOR T THE PRINTER'S EMULA TION MO DE. The printer is factory-set to emulate the PCL. The emulation mode can be changed by following the procedur es described in Chapter 3 .
iii IBM PROGRAM LI CENSE AGRE EMENT THE DEVICE YOU HA VE PURCHAS ED CONT AINS ONE OR MORE SO FTW ARE PROGRAMS (PRO- GRAMS) WHICH BELONG TO INTERNA TIONAL BUSINESS MACHINES CO RPORA TION ( IBM). THIS DOCUMENT DEFINES TH E TERMS AND CONDITIONS UNDER WHICH THE SOFTW A RE IS BEING LICENSED TO YOU BY IBM.
iv Agfa Monotype Li cense Agree ment 1) Software shall mean the digitally encoded, machine readable, scalable outline data as encoded i n a special format as well as the UFST Software.
v FCC ST A TEMENT (for USERS in the United States) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, a nd (2) this device must accept any interf erence received, including inte r- ference that may cause undesired operation.
vi Cautionary Labels Ozone concentration The printers ge nerate ozone gas (O 3 ) which may concentrate in the place of installation and cause an unpleasant smell. T o minimize the concentra tion of ozone gas to less than 0.1 ppm, we recommend you not to install the printer in a confined area where ventilation is blocked.
vii Declaration of Conformity for U.S.A. Model name: Color Page Printer FS-C802 6N T rade name: Kyocera Mita Responsible party: Kyocera Mita Ame rica, Inc.
viii Declaration of Conformity fo r Australia Manufacturer: Kyocera Mita Corporation T amaki Plant Manufacturer’ s address: 704-1 9, Nojino, T amaki-cho, W atarai-gun, Mie-ken 5 19-0497, Japan decla.
ix E NERGY S TA R ® As an E NERGY S TA R Partner , we have determined that this product meets the E NERGY S TA R guidelines for energy efficiency . The basic objective of the E NERGY S TA R Program is to reduce environmental pollu tion by encouraging the manufacture and sale of equipme nt that uses energy more efficiently .
x Installation Precautions Environment CAUTION • A void placing the printer on or in locations which are unstable or not level. Such locations may cause the printer to fall down or fall over . This type of situation presents a danger of personal injury or damage to the pr inter .
xi Power Supply/Grounding the Printer W ARNING • Do not use a power supply with a voltage other than that specified. A void multiple connections in the same outlet. These types of situations present a danger of fire or electrical shock. ......... • Plug the power cord securely into the outlet.
xii Precautions for Use Cautions when Using the Printer W A RNING • Do not place metallic objects or containers with water (flower vases, flower pots, cups, etc.) on or near the printer . This type of situation presents a danger of fire or electrical shock should they fall inside.
xiii Other Precautions • Do not place heavy objects on the printer or cause other damage to the printer . • Do not open the front cover , turn off the main switch, or pull out the power plug during printing. • During printing, some ozone is released, but the amount does not cause any ill effect to one's health.
xiv For More Information... Item Description Installation Guide (paper manual) Describes the printer setup procedure. Quick Reference Guide (paper manual) Describes common information about the printer such as load- ing paper , understanding messages, etc.
xv Guide to the Ope ration Guide This Operation Guide has the following chapt ers: Chapter 1 Introd uction This chapter explains printer features and the names of parts. Chapter 2 Handlin g Paper This chapter explains the types of paper that can be us ed with the printer .
xvi.
Contents xvii Contents Contents Chapter 1 Introduction 1.1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 1.1.1 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents xviii 3.6.2 KC-GL Pen Width and Color . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-32 3.6.3 Alternative Emulation for KPDL Emulation . . . . . . . . . . . . . . . . . . . . 3-33 3.6.4 Printing KPDL Errors . . . . . . . . . . .
Contents xix 4.4.2 General considerations for clearing jams . . . . . . . . . . . . . . . . . . . . . 4-13 4.4.3 Paper Jam – Paper Feed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 -13 4.4.4 Paper Jam — Paper Cassette # . . .
Contents xx.
Cha pter 1 Intr oduction W elcome to professional color printing from Kyocera Mita. The FS-C8026N Ecosys Color Printer lets you print t op quality documents in color or mon ochrome at 26 pages per minute in A4 paper size, and at 13 pages per minute in B4 and A3 paper sizes.
1.1 Features 1-2 1.1 Features This section outlines the major printer features of the FS-C8026N Ecosys color Page Printer . 1.1.1 General Components with an ultra-long product life The main printer components su ch as the imaging drum, development un its, and fuser unit have an ultra-long product life.
1.1 Features 1-3 T w o expansion slots for hardware interfaces The printer is equipped with two expansion slot s for plugging in an optional netw ork interface card and a hard disk (HD-10). Standard bidirectional paralle l interface The bidirectional parallel interface ensures high-speed data transfer between the host computer and printer .
1.1 Features 1-4 PDF direct print Allows you to send a selected PDF file directly to the printer without invo king a printer driver . Account management sy stem This printer comes equipped with an account management system function which records the number of pages printed by each department.
1.2 Parts and Functio ns 1-5 1.2 Parts and Functions This section provides explanations and illustration s for you to determine the parts and their functions. Tr y to be familiar with the names and fu nctions of these parts for correct use and optimal performance.
1.2 Parts and Functio ns 1-6 Figure 1-2 8 Power Switch T urns printer power on and off. 9 Power Cord Connector Connect the power cord that comes with the printer here.
1.2 Parts and Functio ns 1-7 1.2.2 Internal Figure 1-3 1 Magenta (M) T oner Container 2 Cyan (C) T oner Containe r 3 Y ellow (Y) T oner Container 4 Black (K) T oner Container 5 T oner Contai ner Cover Open this cover when replacing a toner container or when cleaning the cha rger unit.
1.2 Parts and Functio ns 1-8 1.2.3 Rear Figure 1-4 1V e n t s V ent s allow cooling air to enter and ozone to exit. 2 Memory Card Slot This slot receives a memory (Compact Flash) card. A memory card can hold fonts, macros, forms, etc., that can be downloaded in the printer ’ s memory .
Chapter 2 Handling P aper The printer can use a variety of media in various sizes. However, any m edia you will choose to use with the printer must be in a ccordance with the guidelines and specifications in this chapter .
2.1 General 2-2 2.1 General Y our Ecosys Color printer is designed for hig h-grade bond (copy) paper , like the type widely used for ordinary xerographic copiers. It will also su pport other types of paper as long as they meet the standards explained in this chapter .
2.1 General 2-3 2.1.3 Minimum and maximum paper sizes The minimum and maximum paper sizes are as follows. For non standard paper such as cut-sheet, the MP (multi-purpose) tray must be used. Figure 2-1 Direction of grain Long grain Pulp content 80 % or more † 135 to 200 g/m² paper should be A4 or Letter size and fed laterally.
2.2 Selecting the Righ t Paper 2-4 2.2 Selecting the Right Paper This section describes the major considerations for selecting the right printing paper . 2.2.1 Guidelines Paper conditions Do not use paper with folded edges, curls, warps, smud ges, tears, or embossing.
2.2 Selecting the Right Paper 2-5 2.2.2 Paper properties Smoothness Paper should have a smooth, uncoated surface. Paper with a rough or sandy surface can cause gaps in printouts. However , paper with surfaces that are too smooth may cause multiple-sheet feed ing and fogging prob lems (fogging is a gray background effect).
2.2 Selecting the Righ t Paper 2-6 2.2.3 Other properties of paper Porosity The density of paper struct ure, which indicates the compactness of the fiber bonding. It is also the characteristic that allows air to pass through paper (i.e., air permeability).
2.3 Loading Paper 2-7 2.3 Loading Paper The following explains the procedure for loading paper in the paper feed cassette and the MP tray . Caution Fan the paper , then tap it on a level surface. This avoid med ia jams or skewed printing. Figure 2-2 2.
2.3 Loading Paper 2-8 2.3.2 Loading paper into the MP (Multi-Purpose) tray Perform the following procedure to lo ad paper into the MP tray . 1 1 1 1 Open the MP tray located on the right side of the printer . Adjust the length of the tray according to the side of paper you w ill use.
2.4 Special Paper 2-9 2.4 Special Paper Besides plain paper , this printer can use the following types of special paper: Note When printing on A4 size paper with thickness above 200g/m 2 , feed the paper sideways from the MP tray . Landscape feed ing can cause paper jam s.
2.4 Special Paper 2-10 When the label paper has extra ma rgin a round the label’ s outside edges that correspo nd to the margins of the printabl e area, do not remove the extra top sheet from the carrier sheet until printing is finished.
2.4 Special Paper 2-1 1 Envelopes Envelopes must b e fed manually . Since the composition of an envelope is more comp lex than that of ordinary paper , it is not always possible to ensure consistent printing quality over the entire envelope surface. Normally , envelop es have a diagonal grain direction.
2.4 Special Paper 2-12.
Cha pter 3 Using the Oper a tor P anel This chapter provides the info rmation you need to configure the Ecosy s Color printer . In general you need to use the operator panel only to make default setti ngs. Y ou can make most changes to the printer settings using the printer driver trough the appl ication software.
3.1 Understanding t he Operator Panel 3-2 3.1 Understanding the Operator Panel The printer ’ s operator panel has keys for operating the printer, as well as a message display and indicators Figure 3-1 Messages that appear on the display and functions of indicators and keys are explained in the sections that follow .
3.1 Understanding the Operator Panel 3-3 Error codes See Chapter 4 T roubleshooting . 3.1.2 Indicators in message display Figure 3-2 Interface indicator (INTERF ACE) The interface indicator shows the .
3.1 Understanding t he Operator Panel 3-4 Paper size indicator (SIZE) This indicator indi cates: • While the printer is in standby , the paper size of the cassette. The default paper cassette is determined by the o perator panel keys. For details, see Section 3.
3.1 Understanding the Operator Panel 3-5 Paper type indicator (TYPE) This indicator shows the paper type defined for the current paper cassette. The paper type can be manually d efined using t he operator panel. For inform ation about confi guring paper type settings, see 3.
3.1 Understanding t he Operator Panel 3-6 3.1.3 Keys The operator panel keys are used to configure the printer operation. Note that certain keys have the secondary function as explained below . Note Configuration made with these keys affect only the interface s that is currently active (indicated by the INTERF ACE indicator on the message display).
3.1 Understanding the Operator Panel 3-7 MENU key The MENU key lets you enter the menu system to change the setup and printing environment of the prin ter . Pressing this key during a menu selectio n will terminat e the selection and retu rn the printer to the normal operation.
3.2 Using the Menu Selection System 3-8 3.2 Using the Menu Selection System 3.2.1 Menu Selection System This section explains how to use the menu selection system. The MENU key on the operator panel allows you to use the menu to set or change the prin ter environment su ch as the number of copies to print, emulation, etc.
3.2 Using the Menu Selection System 3-9 Selecting a menu The mode selection menu is hierarchical. Press the U or V key to display the desired menu. • If the selected menu has a sub-menu, > is displayed after th e menu. Press the Z key to move to the sub-menu or Y key to go back.
3.2 Using the Menu Selection System 3-10 3.2.2 Menu System Road Map The following is the hierarchy diagram of the menu selection system of the printer .
3.2 Using the Menu Selection System 3-1 1 > > >Baud Rate 9600 Interface > Option >NetWare > On >NetWare Off >TCP/IP > On >TCP/IP Off >>NetWare Frame Auto >>IP Address 000.000.000.000 >>Subnet Mask 000.000.
3.2 Using the Menu Selection System 3-12 >List of Option Fonts Font > Page Set > >Copies 001 >LF Action LF only Print Quality > Hard Disk > >Read Data >Write Data >Delete Data >CR Action CR only >Font Select > Option >Font Select > Internal >> I000 >>Size 012.
3.2 Using the Menu Selection System 3-13 >Read Fonts >Write Data >Delete Data >Format >List of Partition Paper Handling > >MP Tray Size A4 >MP Tray Type Plain >Cassette 1 Ty.
3.2 Using the Menu Selection System 3-14 >Color/Mono. mix Mostly mono. >>Punch Off >>Staple Off >Color/Mono. mix Mostly color. Life Counters > >Total Print >New Toner [C] Installed >New Toner [M] Installed >New Toner [Y] Installed >New Toner [K] Installed Continued Others > >Form Feed Time Out 000sec.
3.3 Menu Map and Status Pages 3-15 3.3 Menu Map and Status Pages This section explains the procedure for printing the printer ’ s internal information using the menu selection system. The menu map is usefull as a reference to guide yourself through the menu selection system.
3.3 Menu Map and Status Page s 3-16 Figure 3-3 MENU MAP FS-C8026N P age Printer.
3.3 Menu Map and Status Pages 3-17 3.3.2 Printing a Status Page Y ou can check the printer ’ s current status, including available memory space and option settings by printing a status page. 1 1 1 1 Press the MENU key . 2 2 2 2 Press the U or V key repeatedly until Print Status Page appears.
3.3 Menu Map and Status Page s 3-18 Understanding the status page The numbers in the followin g diagram refer the items explained below the diagram. The items and values on the status page may vary depending on t he printer ’ s firmware version.
3.3 Menu Map and Status Pages 3-19 1 Software version This item shows the version and release date of the printer firmware. 2 Hardware information This item shows v arious printer sett ings for hardwa.
3.4 e-MPS 3-20 3.4 e-MPS e-MPS is an abbreviation for ‘enhanced-Multiple Printing System’ which implements the following functions that are available from the printer driver: • Job retention •.
3.4 e-MPS 3-21 Job storage Job storage stores print jobs either temporarily or permanently , or i n virtual mailboxes, as you click an appropriate radio button on the printer driver when pri nting from a computer . Virtual mailbox V irtual mailb ox is part of Job Storag e, which stores print jobs on the hard disk witho ut printing.
3.4 e-MPS 3-22 Deleting a quick copy job All quick copy jobs are automatically deleted when the printer is turned off. If you desire to explicitly delete a stored quick copy job, proceed as follows: 1 1 1 1 Follow steps 1 through 8 in the above section to let the title of the job to be deleted displayed.
3.4 e-MPS 3-23 7 7 7 7 Press the ENTER key . The user name and the job name ( Agenda , in this example) entered in the printer driver appear with a blin king quest ion mark ( ? ). 8 8 8 8 Press the U or V key to display the desired job title. 9 9 9 9 Press the ENTER key .
3.4 e-MPS 3-24 5 5 5 5 Double click Model Name on the list. The jobs currently stored in the printer are shown. T o print th e job, right click Job name and then click Print on the drop down list that appears.
3.4 e-MPS 3-25 5 5 5 5 Press the ENTER key . A blinking quest ion mark ( ? ) appears. 6 6 6 6 Press the ENTER key . The document in the mailbox is printed and autom atically deleted from th e mailbox. Printing a list of VMB A V irtual Mailbox list includes the jo bs currently stored in the mailboxes.
3.4 e-MPS 3-26 4 4 4 4 Press the U or V key repeatedly until >e-MPS Configuration > appears. 5 5 5 5 Press the Z key . 6 6 6 6 Press the U or V key repeatedly until >>Quick Copy appears. 7 7 7 7 Press the ENTER key . A blinking cursor ( _ ) appears.
3.4 e-MPS 3-27 4 4 4 4 Press the U or V key and select >e-MPS Configuration > . 5 5 5 5 Press the Z key . 6 6 6 6 Press the U or V key and select >>Perm. Code JOB Size . 7 7 7 7 Press the ENTER key , the message display shows a blinking cursor ( _ ).
3.5 Changing the Interface Parameters 3-28 3.5 Changing the Interface Parameters The printer is equipped with a para llel interface. Option network interface card can also be installed.
3.5 Changing the Interface Parameters 3-29 4 4 4 4 Press the U or V key repeatedly until Serial appears. 5 5 5 5 Press the ENTER key again. 6 6 6 6 Press the Z key . One of the following serial parameters is indicated ( Baud rate for example). Pressing the U or V key toggles through the serial parameters as follows.
3.5 Changing the Interface Parameters 3-30 6 6 6 6 Press the Z key . One of the following menus is indicated. T o change settings for the item, press the ENTER key . Use the U or V key to change the value or selection. Configure settings referring to the explanations below .
3.5 Changing the Interface Parameters 3-31 6 6 6 6 Press the U or V key to move to Subnet Mask . Perform the same procedure to complete entering the subnet mask address. 7 7 7 7 Then, press the U or V key to move to Gateway . Perform the same procedure to complete entering the gateway address.
3.6 Making Default Sett ings 3-32 3.6 Making Default Settings Using the operator panel , you can set the defaul t for the most of printing param eters. Note default setting s made using the operator panel may be overridden by the printer driver settings and application soft ware.
3.6 Making Default Settings 3-33 9 9 9 9 T o set the pen color, press the U or V key . T o change the pen color , press the ENTER key . A blinking question mark ( ? ) appears. 10 10 10 10 Press the U or V key repeatedly until the desi red pen color ( Black , Red , Green , Yellow , Blue , Magenta , Cyan , White ) appears.
3.6 Making Default Sett ings 3-34 3 3 3 3 Press the ENTER key . A blinkin g question mark ( ? ) appears. 4 4 4 4 Select KPDL or KPDL (AUTO) using the U or V key . 5 5 5 5 Press the ENTER key . 6 6 6 6 Press the Z key . Press the U or V key until >Print KPDL Errs (errors) appears.
3.6 Making Default Settings 3-35 Selecting regular or dark Courier/Let ter Gothic Courier or Letter Gothic font thickness can be selected as Regular or Dark . In the procedure below , it is assumed that Courier is selected. Th e procedure is the same for Letter Gothic.
3.6 Making Default Sett ings 3-36 Character pitch for Co urier/Letter Gothic Y ou can set the character pitch for fixed fonts when the default font is Courier or Letter Gothic. 1 1 1 1 Press MENU key . 2 2 2 2 Press the U or V key repeatedly until Font > appears.
3.6 Making Default Settings 3-37 3 3 3 3 Press the Z key . 4 4 4 4 Press the U or V key repeatedly until >List of Internal Fonts or >List of Option Fonts appears. 5 5 5 5 Press the ENTER key . A question mark ( ? ) appears. 6 6 6 6 Press the ENTER key again.
3.7 Pagination 3-38 3.7 Pagination In Page Set menus, you can set the number of copies, page orientation, and other settings regarding pagi nation. 3.7.1 Number of Copies Y ou can set the number of copies of each page to be printed for the current interface.
3.7 Pagina tion 3-39 3.7.3 Linefeed (LF) Action This procedure instructs the printer what to do when it receives a linefeed code (0AH). • LF Only : Linefeed is performed (Default). • CR and LF : A linefeed and carriage return are performed. • Ignore LF : The linefeed is ignored.
3.8 Setting Print Quality 3-40 3.8 Setting Print Quality The printer features the Print Quality menu which lets you select: • T one mode (Norm al and Fine) • Gloss mode (Low and High ) 3.8.1 T one Mode The T one Mode selects the way the printer h andles a pixel for representi ng the color an d halftoni ng for each pi xel — Normal or Fine.
3.8 Setting Print Quality 3-41 5 5 5 5 T o change the gloss mode, press the ENTER key . A blinking questio n mark ( ? ) appear s. 6 6 6 6 Press the U or V key to change from Low to High . 7 7 7 7 Press the ENTER key to finalize the selection. 8 8 8 8 Press the MENU key .
3.9 Operating the Storage Device 3-42 3.9 Operating the Storage Device The printer supports three types of storage device: memory card, optio n hard disk (HD-10), and RAM disk . The memory card and option hard disk are installed into the dedicated slots of the printer .
3.9 Operating the Storage D evice 3-43 6 6 6 6 Press the ENTER key . Processing appears and the reading of data from the memory card starts. When completed, Processing disappears. 7 7 7 7 Press the MENU key . The display returns to Ready . Reading data Y ou can print out the data in the memory card.
3.9 Operating the Storage Device 3-44 8 8 8 8 Check that the message display has changed to W aiting, then press the GO key . This writes the file to the memory card and instructs th e printer to automatically print out a memo ry card write information page as show n below .
3.9 Operating the Storage D evice 3-45 When the formatting is successfully completed, the printer automatically prints out a format information page (FORMA T INFORMA TION), which allows you to check the memory card for proper formatting.
3.9 Operating the Storage Device 3-46 3.9.2 Using the Option Hard Disk (HD-10) Installing the optio n hard disk into the printer allows you to perform the following operations on the hard disk.
3.9 Operating the Storage D evice 3-47 5 5 5 5 Press the ENTER key . A blinking cursor ( _ ) appears. Press the U or V key to display the desired size. Definable RAM disk size is 0001 to 1024 . This range varies depend ing on the total memory size of the printer .
3.10 Paper Handling 3-48 3.10 Paper Handling This section explains how to change mode for the MP (multi-purpose) tray , the paper size and type for each paper source, and how to select the paper source and paper destinations. 3.10.1 MP T ray Mode The MP tray ca n be used in either of two modes — Cassette or First .
3.10 Paper Handling 3-49 6 6 6 6 Press the U or V key to display the desired paper size. The message d isplay toggles throu gh the following paper sizes: Business Comm.
3.10 Paper Handling 3-50 7 7 7 7 When the desired paper type is displayed, press the ENTER key . The pap er type is set to the MP tray . 8 8 8 8 T o exit the menu selection, press the MENU key .
3.10 Paper Handling 3-51 6 6 6 6 Press the U or V key to display the desired paper feed source. The message display t oggles through the following paper feed sources, depending on the installed optio .
3.10 Paper Handling 3-52 5 5 5 5 T o activate duplex printing, press the ENTER key . A blinking questio n mark ( ? ) appear s. 6 6 6 6 Press the U or V key to display the desired binding mode.
3.10 Paper Handling 3-53 7 7 7 7 Press the U or V key to increase or decrease, respectively , the value at the blinking cursor . Use the Z and Y keys to move the cursor right and left. Definable value: -010 to 010 8 8 8 8 When the desired value is displayed, press the ENTER key .
3.10 Paper Handling 3-54 6 6 6 6 Press the U or V key to scroll to the other custom position. Custom 1 Custom 2 Custom 3 Custom 4 Custom 5 Custom 6 Custom 7 Custom 8 7 7 7 7 When the paper type to be customized is displayed, press the ENTER key . Proceed to the next procedure.
3.10 Paper Handling 3-55 4 4 4 4 Press the U or V key repeatedly until >Reset Type Adjust appears. 5 5 5 5 T o reset all custom paper types, press the ENTER key . A question mar k ( ? ) appears. 6 6 6 6 Press the ENTER key . All customized paper types, including weight and duplex printing capability , will be reset to the default.
3.1 1 Selecting Monochrome or Color Printing 3-56 3.1 1 Selecting Monochrome or Color Printing Y ou can use the Color Mode menu on the operator panel to select the Monochrome or Color printing mode. By defaul t, the printer i s set to p rint in co lor mode.
3.12 Reading Life Co unters 3-57 3.12 Reading Life Counters Y ou can display the total number of pages printed by your printer whenever it is necessary . The total number of printed pages can also be checked on the status page. See Section 3.3.2 Printing a Status Page on pag e 3-17 .
3.13 Other Modes 3-58 3.13 Other Modes The following modes can be accessed in the Others submenu: • Message Language • Automatic Form Feed T imeout Settin g • Sleep Ti mer Setting • Received D.
3.13 Other Modes 3-59 6 6 6 6 Press the U or V key to increase or decrease the value at the blinking cursor and set the desired time. The timeout time can be between 0 and 495 seconds, in 5-second increments. Use the Z and Y keys to move the cursor right and left.
3.13 Other Modes 3-60 6 6 6 6 Press the U or V key to increase or decrease the value at the blinking cursor and set the desired time. The timer can be set between 5 and 240 min, in 5-minute increments. Use the Z and Y keys to move the cursor right and left.
3.13 Other Modes 3-61 6 6 6 6 Press the ENTER key again. Self test appears while the printer is resetting itself, followed by Please wait and then Ready . 3.13.6 Resource Protection By default, when you switch from the PCL 6 emulation to another , all downloaded fonts and macros will be lost.
3.13 Other Modes 3-62 5 5 5 5 Press the ENTER key . A blinkin g question mark ( ? ) appears. 6 6 6 6 Select On or Off using the U or V key . 7 7 7 7 Press the ENTER key .
3.13 Other Modes 3-63 7 7 7 7 Press the U or V key to increase or decrease the value at the blinking cursor and set the desired time. The time must be set between 000 and 495 seconds, in 5-second increments. If set to 000 , printing will be continued immedi ately without any time interval.
3.13 Other Modes 3-64 6 6 6 6 Press the U or V key repeatedly until >>Staple appears. 7 7 7 7 Press the ENTER key . A blinking quest ion mark (?) appears. 8 8 8 8 Press the U or V key to change Of f to On. 9 9 9 9 Press the ENTER key . 10 10 10 10 T o exit the menu selection, press the MENU key .
3.13 Other Modes 3-65 2 2 2 2 Press the U or V key repeatedly until Others > appears. 3 3 3 3 Press the Z key . 4 4 4 4 Press the U or V key repeatedly until >Color/ Mono. mix appears. 5 5 5 5 Press the ENTER key . A blinking quest ion mark (?) appears.
3.13 Other Modes 3-66 4 4 4 4 Press the U or V key repeatedly until > Service > appears. 5 5 5 5 Press the Z key . 6 6 6 6 Press the U or V key repeatedly until >> Color Calibration appears. 7 7 7 7 T o let the printer perform color calibrati on, press the ENTER key .
3.13 Other Modes 3-67 6 6 6 6 Press the U U U U or V V V V key repeatedly until >> High Density Mode appears. 7 7 7 7 Press the ENTER key . A blinking ( ? ) appears 8 8 8 8 Press the U U U U or V V V V key to select a number from 01 to 03 . 9 9 9 9 Press the ENTER key .
3.13 Other Modes 3-68.
Cha pter 4 T r oubleshooting 4 This chapter explains how to handle printer problems th at may occur . If a problem cannot be corrected, contact your Kyocera Mita dealer .
4.1 General Guidelines 4-2 4.1 General Guidelines The table below provides basic solu tions for problems you may encounter with the prin ter . W e suggest you consult this table to troubleshoot the problems befo re calling for service. 4.1.1 Tips Printer problems may be solved easily by following the tips below .
Print Quality Problems 4-3 4.2 Print Quality Problems The tables and diagrams in the follo wing sections define print quality problems and the corrective action you can conduct to solve the problem s. Some solutions may require cleaning or replacing parts of the printer .
4.2 Print Quality Problems 4-4 Black or white vertical streaks Check the operator panel for toner. If the Toner low (C/M/Y/K) message is dis- played with color description, install a new toner kit for the color. To replace the toner container, see 5.1 T oner Container Replacement on page 5-2 .
4.2 Print Quality Problems 4-5 Dirt on the top ed ge or back of th e paper Clean the main c harger. Open the printer front cover. Pull the green cleaning knob slowly in and out a few times. For full details, see 5.3.2 Cleaning the Main Char ger Unit on page 5-7 .
4.3 Error Messages 4-6 4.3 Error Messages The following table lists errors and maintenance mess ages that you can be dealt with by yourself. If Call service appears, turn off the printer , disconnect the power cord, and contact your Kyocera Mita dealer .
4.3 Error Messages 4-7 Check feed unit The feed unit of the optional paper feeder is not installed correctly. Open the paper feeder paper cassette and correct the problem. This message appears only when the PF-647 paper feeder is installed on the printer.
4.3 Error Messages 4-8 I/F occupied The interface whose setup you are trying to change is in use. Wait until the print job that is using the interface is finished, and try again. ID error The user ID entered for a private job or a stored job is not correct.
4.3 Error Messages 4-9 Memory ove rflow Press GO The printer does not have enough memory. You can print a status page to check the cu rrent memory le vel. Try adding more memory. Press the GO key to resume printing. You can cancel the print job by pressing the CANCEL key.
4.3 Error Messages 4-10 Set paper press GO The MP tray is out of paper. Load the proper type of paper onto the MP tray, and then press the GO key to resume printing. Toner low C,M,Y,K Replace the toner container of the indicated color (C: Cyan, M: Magenta, Y: Yellow, K :Black) using a new toner kit.
4.3 Error Messages 4-1 1 Storage error codes Hard disk errors Memory card errors RAM disk errors Code Meaning 01 Hard disk format error. If this error recurs even if the power has been turned off and then on , reformat the hard disk. 02 The disk system is not installed.
4.4 Clearing Paper Jams 4-12 4.4 Clearing Paper Jams If the paper jammed in the paper transport system, or no pap er sheets were fed at all, the Paper jam message appears and the location of the paper jam (the component where the paper jam has occurred) is also indicated.
4.4 Clearing Paper Jams 4-13 4.4.2 General considerations for clearing jams Bear in mind the following consideration s when attempting jam removal: Caution When you remove paper jams, be sur e to remove all of the jammed paper in the printer .
4.4 Clearing Paper Jams 4-14 4.4.4 Paper Jam — Paper Cassette # When a paper jam occurs in a paper cassette, clear the jam using the follow ing steps. 1 1 1 1 Pull out the paper cassette and remove the jammed paper . Figure 4-3 2 2 2 2 If you cannot remove the jammed paper as shown in step 1, remove the paper cassette from the printer .
4.4 Clearing Paper Jams 4-15 4.4.6 Paper Jam – Duplex Unit When a paper jam occurs in the optional Duplex Unit, clear the jam using the follow ing steps. 1 1 1 1 Pull out the duplex unit. 2 2 2 2 Open the top cover of the Duplex Unit and remove the jammed paper .
4.4 Clearing Paper Jams 4-16 4 4 4 4 Remove the jamm ed paper . Figure 4-13 If the end of the p aper is soiled with toner, pull it in the direction indicated by the arrow to remove it. Figure 4-14 5 5 5 5 Pressing the handle of the transfer unit, return the transfer unit securely to its original position.
4.4 Clearing Paper Jams 4-17 4.4.9 Paper Jam – Left Cover When a paper jam occurs at the left cover , clear the jam using the following steps. Note The fuser unit and roller s become very hot during normal use. Neve r touch them with your hands. 1 1 1 1 Open the left cover , and then rotate the green knob to remove the jammed paper .
4.4 Clearing Paper Jams 4-18.
Chapter 5 Maintenance 5 This chapter describes the following basic printer maintenan ce tasks you can perform. • T oner container replacement • W aste toner box replacement • Cleaning.
5.1 T oner Container Replace ment 5-2 5.1 T oner Container Replacement 5.1.1 T oner Container Replacement Requirements The actual life of a toner container depends on the am ount of toner you use for printing your particu lar documents.
5.1 T oner Contain er Replacement 5-3 T o replace the toner container , firs t make sure of the color of the toner container requiring replacement. In this example, it is assumed that you are replacing the black toner container . 1 1 1 1 Open the front cover .
5.1 T oner Container Replace ment 5-4 7 7 7 7 Insert the new toner container all the way in. The container is locked automatically when it is properly seated. Figure 5-6 8 8 8 8 Close the toner container cover , and then close the front cover . Press the left and right corners of the front cover to ensure that it is closed securely .
5.2 Replacing the Waste T oner Box 5-5 5.2 Replacing the W aste T oner Box When Replace waste toner box is shown in the messege display , replace the waste toner box.
5.2 Replacing the Waste T oner Box 5-6 6 6 6 6 Close the front cover . When Replace waste toner box is shown in the messege display , replace the waste toner b ox. A new waste toner b ox is included with the toner kit.Alway s clean the interior of the printer after replacing a toner container .
5.3 Cleaning the Printer 5-7 5.3 Cleaning the Printer As discussed earlier , the following parts must be cleaned each time the toner container and waste toner box are replaced: • Paper transfer unit • Main charger unit In addition to this, it is recommended that these parts are cleaned periodically at least once a month.
5.3 Cleaning the Printe r 5-8 3 3 3 3 First we clean main char ger wire. Grasp the tab of the cleaning knob (green-colored). Ge ntly pull the cleaning bar out and p ush it back in. Repeat this 3 to 5 times. Figure 5-17 4 4 4 4 Next, we clean main charger grid.
5.3 Cleaning the Printer 5-9 8 8 8 8 After cleaning the charger wire and grid, check to make sure that the charger unit is back in its original position, and then close the toner cont ainer cover and front cover .
5.3 Cleaning the Printe r 5-10.
A ppendix A Options Y our printer can be installed with various opt ions indicated in this appendix. Y ou can select the options that will satisfy your printing requirements.
A.1 Options A-2 A.1 Options The following shows the optio ns that can be installed on the FS-C8026N printer . Though some options are explained in the follo wing pages of this Appendix, see the document that comes with each option for detailed information that is not provided here.
A.2 Expansion Memory Modul es A-3 A.2 Expansion Memory Modules Expanding printer memory let s you prin t more co mplex data, and also makes printing faster . The FS-C8026N printer has a single memory ex pansion slot, which you can use to expand memory up to a maximum of 512MB.
A.2 Expansion Memory Modul es A-4 5 5 5 5 Remove the memory module from its package. Aligning the cutou ts of the memory module with the matching keys of the socket, carefully plug the memory mo dule into the m emory socket unti l it clicks in place. Figure A-6 6 6 6 6 Push down the two socket clamps to secure the memory m odules.
A.3 General Description of Options A-5 A.3 General Description of Options A.3.1 Memory Card The printer is equipped with a slot for a memory card with the maximum size of 256 MB. A memory card is useful for storing fonts, macros, and overlays. Y ou can use the IC Link for Windows utility to download fonts, etc.
A.3 General Description of Options A-6 A.3.3 PT-640 Fece-Up T ray Attach the optional Face-Up Tray to the left side of the printer as shown in the illustration. Use of the Face-Up T ray help to avoid stress to the printer and pri nt media when printing on envelopes, postcards, OHP transparencies, etc.
A.3 General Description of Options A-7 The following optional devices can be instal led on the document fini sher . A.3.6 CA-33 Caster Kit These casters are mounted at the bottom of the bottom feeder for moving or fixin g the printer .
A.3 General Description of Options A-8 A.3.8 IB-20/IB-21E/IB-22 Network Interface Cards Along with the standard for the network interface on the printer , the network interface card supports TCP/IP , IPX/ SPX, NetBEUI and EtherT alk protocols, so that the printer can be used on network environments including Windows, Macintosh, UNIX, NetW are, etc.
A ppendix B Computer Interf ace This appendix explains the pin assignments, signals, timing , connectors, and other specifications for printer's parallel interface.
B.1 Parallel Interface B-2 B.1 Parallel Interface B.1.1 Communication Modes The printer provides high-speed data transmission on a parallel interface. Y ou can select the parallel interface communication mode from the operation panel. T o change communication mode, see 3.
B.1 Parallel Interface B-3 B.1.2 I nterface Signals T able shows the connector pins and corresponding input and output signals of the parallel interface. Explanation of each signal is also given in the table. The description in [ ] indicates signal names in Auto mode and Nibble (high) mode (IEEE 1284-compliant).
B.1 Parallel Interface B-4 30 — Ground return 31 In [nInit] Ignored 32 Out Error † [nFaul t] When the high-speed parallel line control is on, this line returns an error status. †† 33 —— N o t u s e d 34 —— N o t u s e d 35 Out Power Ready This signal goes high when the printer is powered on.
A ppendix C T ec hnical Specifica tions The technical specification may be changed for improvement purpose..
C.1 Printer Specification C-2 C.1 Printer Sp ecification Item Specification Printing method Electro photographic (A dvanced Beam Array) single-pass 4-color tandem drum system Printing sp eed See C.
Printer Specification C-3 Operating environ- ment T emperature 10 to 32.5 ºC (50 to 90.5 ºF) Relative humidi ty 20 to 80 % Optimum Condi- tions 23ºC (73ºF), 60 % (relative humidity) Altitude 2,000 meters (6,500 feet) maximum Illumination 1,500 lux or less Power Requirements U.
C.2 Printing Speeds C-4 C.2 Printing S peeds Mode Paper Size Print Speed Simplex Printing A4, Letter , B5 (Pap er cassette feed ing) 26 pages/minute A4, Letter , B5 (MP tray feeding) 24 pages/minute B.
Index-1 Inde x A Audible alarm how to set 3-61 Auto-continue changing recovery time 3-6 2 how to set 3-62 C Carriage return how to select 3-39 Cleaning main charger unit 5-7 paper transfer unit 5- 7 u.
Index-2 J Job retention functions tabled 3-20 private job, how to use 3-22 proof-and -hold, how to use 3- 22 quick copy, how to use 3-21 Job storage functions 3-21 K Keys arrow keys 3-7 basic operatio.
Index-3 Paper cassette as hardware feature 1- 3 clearing pa per jam 4-14 diagram 1-5 selecting the paper feed source 3-50 setting paper type 3-50 Paper feeder diagrammed A-5 Paper jam general consider.
©2003, 2004 is a trademark of Kyocera Corporation Revision 1.3 2004. 2.
Ein wichtiger Punkt beim Kauf des Geräts Kyocera FS-C8026N (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Kyocera FS-C8026N noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Kyocera FS-C8026N - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Kyocera FS-C8026N reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Kyocera FS-C8026N erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Kyocera FS-C8026N besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Kyocera FS-C8026N verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Kyocera FS-C8026N. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Kyocera FS-C8026N gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
