Benutzeranleitung / Produktwartung LP-350 des Produzenten Korg
Zur Seite of 44
.
2 Precautions Location Using the unit in the following locations can result in a malfunction. • In direct sunlight • Locations of extreme temperatur e or humidity • Excessively dusty or dirty lo.
3 *All product names and company names ar e the trademarks or register ed trademarks of their respective owners. THE FCC REGULA TION W ARNING (for USA) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
4 Main features ..................................................... 6 Chapter 1 ............................................................ 7 Front, top, and rear panels .............................................. 7 Front panel .................
5 Chapter 5 .......................................................... 25 MIDI ................................................................................. 25 What's MIDI? .....................................................................
6 Main f eatures 30 different high-quality sounds Thirty richly expressive high-quality sounds are built in, including a ster eo concert grand. In addition to playing one sound at a time, the LP-350 will allow you to layer two sounds together .
7 Chapter 1 Fr ont, top, and rear panels Fr ont panel 1. Power switch : T urns the LP-350 on/off. 2. Headphone jacks : Up to two headphones can be connected her e. The jacks accommodate stereo phone (1/4") jacks. Use the MASTER VOLUME slider to adjust the volume.
8 T op panel 1. Music rack : This provides a convenient place to rest your sheet music and scor es. Do not apply excessive pressure to the key cover when securing a music book in an opened posi- tion. 2. MASTER VOLUME slider : Controls the volume of the internal speakers, head- phone jacks, and line output jacks.
9 Rear panel 1. MIDI (IN, OUT) connectors : These jacks allow you to connect the LP-350 to other MIDI devices (e.g., computer , synthesizer , ). I N: This receives MIDI messages (connect it to the MIDI OUT of an external MIDI device that’s controlling the LP-350).
10 Chapter 2 Bef ore y ou begin Connect the A C adapter 1. Make sure that the LP-350 is turnedof f. 2. Connect the AC adapter cable to the included AC adapter. Y ou must use the included AC adapter and AC adapter power cable. Using a different AC adapter or cable may cause malfunctions.
11 Opening or c losing the key co ver The key cover can be easily opened or closed. Opening the key cover 1. Using both hands, gently lift the key cover to open it. Closing the key cover 1. Raise the edge, and gently pull the key cover toward yourself.
12 Using headphones If you’re using headphones, connect them to the headphone jack. If your head- phones have a mini (1/8") jack, you’ll need to use a 1/8" → 1/4" adapter . Grasp the plug (or adapter), not the cable, when connecting or disconnect- ing headphones.
13 Listening to the demo songs The LP-350 contains thirty demo songs, with ten songs in each of thr ee groups. Here’s how to listen to the demo songs and enjoy the LP-350’s rich sounds and expressive potential. * Korg original compositions and performances: M.
14 2. During playback, you can switch to a dif ferent demo song within that group by pressing the sound select button to which that song is assigned. For example if the first demo song in gr oup 1 is playing, and you want to switch to the last demo song (10) in that gr oup, pr ess the [ CHOIR ] sound button.
15 Chapter 3 Pla ying the LP-350 Selecting a sound (Single mode) The LP-350 gives you a choice of thirty (10 x 3 banks) high-quality sounds. #: This is the number of oscillators used by the sound (“About the maximum polyphony ” on page 31) 1. Press one of the sound select buttons The indicator above that button will light.
16 The LP-350 will be in Layer mode, and the indicators above the two sound select buttons will light. Lay ering sounds in different banks 1. While still in Single mode, select the bank that you want to use for each sound.
17 When you turn off the power , the effect settings will return to their factory settings. Y ou can use the Data Dump function to save your ef fect mode set- tings on an external MIDI data fi ler (“MIDI data dump” on page 29). Y ou can’t change the effect (reverb, chorus) settings while a demo song is playing.
18 Sostenuto pedal The damper effect will be applied only to the notes that wer e already being held down when you pressed this pedal, and those notes will be sustained while you continue holding down the pedal. The damper ef fect will not be applied to notes that were played after you pressed this pedal.
19 To return to the standard volume, hold down the METRONOME button and pr ess the [STRINGS/P AD] and [CHOIR] sound select buttons (or the B5 and C6 keys) simultaneously . Adjusting the tempo Y ou can adjust the tempo in a range of = 40 – 200. Inputting a numerical tempo value The TEMPO slider lets you set an appr oximate tempo.
20 Setting the time signature An accent will be added to the fi rst beat of each measure. 1. Hold down the METRONOME button, and press the sound select button for the desired time signature. An accent will be added at the beginning of each measur e. 2.
21 Chapter 4 Other functions Ke yboar d touch contr ol setting Y ou can change the way in which the sound will respond to the dynamics of your playing. To change the setting, hold down the T OUCH button and press one of the [PIANO 1/L], [PIANO 2/M], or [E.
22 1. While holding down the TRANSPOSE/FUNCTION button, press one of the F#6–F7 keys to specify the desired transposition. If you press a key other than C7, the TRANSPOSE/FUNCTION button indicator will light, and pitch of the entire keyboard will be shifted.
23 3. T o return to the standard pitch, hold down the TRANSPOSE/FUNCTION but- ton and press the B5 and C6 keys simultaneously. Selecting a temperament Many compositions of classical music wer e created with a specific historical temper- ament (tuning method) in mind.
24 About stretched tuning The [PIANO 1/L] and [PIANO 2/M] sounds use stretched tuning. In order to obtain a more natural sound, stretched tuning tunes the lower notes slightly fl atter and the higher notes slightly sharper than the equal temper ed pitches.
25 Chapter 5 MIDI What’ s MIDI? MIDI (Musical Instrument Digital Interface) is a world-wide standar d for transfer- ring performance-related information between electr onic musical instruments and computers.
26 Basic MIDI settings When you turn on the power , the LP-350’s MIDI parameters are set as follows. * The metronome sound (D5 , E5) is assigned to be received on channel 10.
27 Using the LP-350 as a m ulti-timbral sound module By using an external MIDI device to contr ol the LP-350’s internal sound generator , you can use the LP-350 as a 16-part multi-timbral sound module. 1. Use a MIDI cable to connect the LP-350’s MIDI IN connector to the MIDI OUT connector of your sequencer or other MIDI device.
28 Program change transmission When you select a sound on the LP-350 using the sound select buttons and BANK button, a MIDI program change message of the corr esponding number 0–29 will be transmitted. Program change reception When the LP-350 receives a program change number 0–29, it will switch to the cor - responding sound.
29 Enabling/disabling program changes Enable this setting if you want program change messages to be transmitted and received, or disable it if you don’t want these messages to be transmitted or received. To enable or disable program changes, hold down the TRANSPOSE/FUNCTION button and press the [PIANO 2/M] sound select button.
30 The following table shows the data that will be saved by a data dump. Saving data on y our data filer 1. Use a MIDI cable to connect the LP-350’s MIDI OUT connector to your data filer ’ s MIDI IN connector. 2. Operate your data fi ler so that it is waiting to receive MIDI data from the LP- 350.
31 Chapter 6 Appendix Tr oub leshooting If you experience a problem, please check these points fi rst. If the LP-350 still does not operate correctly , contact a Korg service center .
32 Keep the maximum polyphony in mind and choose your sounds car efully when using Layer mode to play two sounds simultaneously , or when using the damper pedal or applying effects. Y ou can use the following equation to calculate the maximum polyphony when using different combinations of sounds and effects.
33 Assemb ling the stand Caution during assemb ly In order to assemble the stand safely , please observe the following points. • Make sure that you have the correct part in the correct orientation, and per- form the assembly in the order given.
34 2. Using screws (M6), attach the left and right side panels, the speaker box, and the pedal box. Position the speaker box with its speaker cable upwar d (the speakers facing yourself). Y ou will re-tighten all the screws after the entire piano is assembled.
35 If you’ve attached the anti-tipping blocks to the left and right side panels, you’ll have the option of moving the pedal box towar d the rear if desired. Attach the pedal box in the position that’s most comfortable for your height, build and playing style.
36 4. Make sure that there are no gaps or misalignments in the stand, and securely tighten all of the screws. 5. Attach the caps to the screw holes of the left and right side panels.
37 7. Connect the pedal cable and speaker cable to the connectors on the LP-350’ s rear panel. Then use the cable holder to secure the pedal cable. Pay attention to the orientation of the connectors when connecting the pedal cable and speaker cable.
38 Other cautions Please check the following points after assembly . • Loosened screws The screws may loosen as time passes after assembly . Y ou should periodically check whether any screws have become loose. If you feel that the stand vibrates excessively , it is possible that screws have come loose.
39 Sound select b utton function list By pressing a sound select button while holding down the REVERB, CHORUS, T OUCH, METRONOME, or TRANSPOSE/FUNCTION buttons, you can adjust the parameters shown in the following table.
40 MIDI Implementation Chart MIDI Implementation Char t [Digital Piano] Function ... T ransmitted Received Remarks Basic channel: Default Changed Mode Def ault Messages Altered Note numbers: Tr ue voi.
41 Program Change: Tr ue# System Exclusiv e System Common: Song P os Song Sel T une System Realtime: Clock Commands A ux Messages: Local ON/OFF All Notes OFF Activ e Sense Reset Notes *1: T ransmitted and receiv ed if control changes are enabled. *2: T ransmitted and receiv ed if program changes are enab led.
42.
43.
4015-2 Y anokuchi, Inagi-city , T okyo 206-0812 Japan ©2008 K ORG INC. IMPORT ANT NOTICE T O CONSUMERS This product has been manuf actured according to strict specifications and voltage requirements that are applicab le in the countr y in which it is intended that this product should be used.
Ein wichtiger Punkt beim Kauf des Geräts Korg LP-350 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Korg LP-350 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Korg LP-350 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Korg LP-350 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Korg LP-350 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Korg LP-350 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Korg LP-350 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Korg LP-350. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Korg LP-350 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
