Benutzeranleitung / Produktwartung IP-011 des Produzenten Konica Minolta
Zur Seite of 102
USER’S GUIDE IP-011 Bef ore printing read this guide ..
Thank you v ery much f or y our purchase of the IP-011. This Guide deals with making prints, correct handling of the machine, and precaution f or saf ety . Please read bef ore printing. In order to maintain a satisf actor y printing perf or mance, please k eep this Guide readily a v ailab le f or ref erence.
Introduction IP-011 Printer Controller i Printed in Japan K ONICA CORPORA TION Make sure to read bef ore use Thank you v ery much for purchasing the "K onica Printer Controller IP-011." K onica Corp. ("K onica") allo ws y ou to use the software attached to the IP-011 only when y ou agree to its "Software License Agreement.
Introduction ii IP-011 Printer Controller ■ Contents ■ Contents ...................................................................................................................... ........ ii ■ Introduction ...................................
Introduction IP-011 Printer Controller iii ■ Printer Driver Function List .............................................................................................. 3-5 ■ Description of Pr inter Driver Functions (in the alphabetic order) .....
Introduction iv IP-011 Printer Controller Appendix A T roub leshooting .................................................... Appendix A-1 ■ Error Message ................................................................................................
Introduction IP-011 Printer Controller v ■ Intr oduction The IP-011 Printer Controller works as an interface between the K onica 7020 ser ies Copier and a workstation, and enables direct printing from a workstation environment.
Introduction vi IP-011 Printer Controller ● A par t or all of this operating manual shall not be used or copied without permission. ● K onica shall hav e no liability f or an y influences caused by using the 7020 series copier +IP-011 system and this manual.
Introduction IP-011 Printer Controller vii ■ About P ositioning of This Manual This manual describes how to operate the Printer Controller K onica IP-011 when the K onica 7020 ser ies copier is used as a printer by connecting it to computers or y our network.
Introduction viii IP-011 Printer Controller ■ System Requirements ● Windows The f ollowing are required to print from the Windows*-compliant computers to the Printer Controller .
Introduction IP-011 Printer Controller ix ■ Rules in This Manual • Notation of a name of each section in this manual It is written within [ ] (round brack ets). (e.g. [Chapter 1: Outline ]) • Notation of names shown on the screen They are written within [ ](braces).
Chapter 1 Outline IP-011 Printer Controller 1-1 Chapter 1 Outline ■ Contents of This Chapter ............................................................ 1-2 ■ Outline of the Printer Controller .................................................. 1-3 ● IP-011 and Printer Engine .
Chapter 1 Outline 1-2 IP-011 Printer Controller ■ Contents of This Chapter This chapter describes the outline of the Konica IP-011 Printer Controller . F or the Copier , Konica 7020 series to which the K onica IP-011 Printer Controller is attached, refer to the oper ating manual of the Copier .
Chapter 1 Outline IP-011 Printer Controller 1-3 ■ Outline of the Printer Contr oller ● IP-011 and Printer Engine The K onica IP-011 is the Printer Controller (IP-011) which is used to connect the .
Chapter 1 Outline 1-4 IP-011 Printer Controller ● IP-011 Hard ware Configuration Basic Configuration Configuration of the IP-011 is as f ollows: Control board CPU: P ower PC 401 GF Program memory: FLASH R OM System memory: 16MB SD-RAM Memory The IP-011 is equipped with 16 MB memory as standard and can be expanded to 80 MB at the maximum.
Chapter 1 Outline IP-011 Printer Controller 1-5 ● Data Flow Status Monitor Control P anel Application Printer Driver IEEE1284 Browser HTML Network (TCP/IP ,IPX/SPX) IP-011 IEEE1284 NIC Printer Contr.
Chapter 1 Outline 1-6 IP-011 Printer Controller ● Ho w to Use Memory Most of memory of the IP-011 is used for rasterizing images and a par t of it is used for the system oper ation. In addition, E-RDH memor y of the K onica 7020 ser ies is used for print processing.
Chapter 1 Outline IP-011 Printer Controller 1-7 ● General View The IP-011 is mounted to the K onica 7020 series. The f ollowing is the gener al view .
Chapter 1 Outline 1-8 IP-011 Printer Controller ■ About the Printer T ools ● About the Printer T ools When you install printer driver with “setup .ex e” held in the CD-ROM to the computer connected to the system of K onica 7020 series and IP-011, you can select simultaneous installation of the Printer T ools.
Chapter 1 Outline IP-011 Printer Controller 1-9 ■ About the Printer Driver ● Compliant OS The printer driver can be used on the follo wing OS . Windows 95 Windows 98 Windows NT 4.0 Windows 2000 (to be supported) Ref er to “2 Setup” (2-1 page) f or how to install the printer driver .
IP-011 IP-011 Printer Controller 2-1 Chapter 2 Setup ■ Contents of This Chapter ............................................................ 2-2 ■ Installation of the Printer Dr iv er ................................................... 2-3 ● Before Installation .
Chapter 2 Setup 2-2 IP-011 Printer Controller ■ Contents of This Chapter In order to use the 7020 series +IP-011 system, it is required to connect the 7020 series +IP-011 system to computers by wa y of the parallel por t and to install the printer dr iver to the computers .
Chapter 2 Setup IP-011 Printer Controller 2-3 ■ Installation of the Printer Driver ● Before Installation Models and En vironment of Computers The Printer Controller for K onica 7020 ser ies, IP-011, can be used with most computers r anging from personal computers to workstations.
Chapter 2 Setup 2-4 IP-011 Printer Controller ● Installation to Windows95/98 P erf or m the following steps to install the K onica IP-011 Printer Dr iver to Windows 95/98. Please keep the “User Software CD” on hand since it is required to install the printer driver .
Chapter 2 Setup IP-011 Printer Controller 2-5 The [T ype of Connection] screen will appear . Then, select [Local] and clic k the [Next] button. When the K onica 7020 series Copier (IP-011) is directly connected to a computer to which the printer driver will be installed, select [Local].
Chapter 2 Setup 2-6 IP-011 Printer Controller Installation by using [Ad d Printer] In this method, only the printer dr iv er is installed. T urn on the computer and start Windows. When the Windows applications are active, exit fr om them. Click the [Start] button of the task bar .
Chapter 2 Setup IP-011 Printer Controller 2-7 ● Installation to WindowsNT4.0 Only authorized system administrators or printer administrators are allow ed to install the K onica IP-011 printer driver to WindowsNT4.0. Please keep the “User Software CD” on hand since it is required to install the printer driver .
Chapter 2 Setup 2-8 IP-011 Printer Controller Installation by Using the “User Software CD” T urn on the computer to start WindowsNT4.0. . Log on as an administrator (or a user entitled to install the P ower User , etc.). . Set the “User Software CD” on the CD-ROM drive.
Chapter 2 Setup IP-011 Printer Controller 2-9 The screen to select a port will appear . Then, select the port to which the K onica 7020 series Copier is connected and clic k the [Next] b utton. The [Printer Name] screen will appear . Then, specify the printer name and click the [Next] b utton.
Chapter 2 Setup 2-10 IP-011 Printer Controller ● Uninstallation of the Printer Driver When any Windows applications are active, quit all of them. . Click the [Start] button of the task bar . Select [Settings] of the Start menu and clic k the [Control P anel] of the sub menu.
Chapter 2 Setup IP-011 Printer Controller 2-11 ■ T est Print Y ou can check whether the printer driver functions properly by perf or ming a test pr int after the printer driver has been installed. Click the [Start] button of the task bar . Then, select [Settings] of the Start menu and clic k [Printers] in the sub men u.
Chapter 2 Setup 2-12 IP-011 Printer Controller ■ Print fr om Applications ● Execution of Printing Click the [File] men u of each application and c lick [Print]. . Check that [K onica IP-011] is shown on [Printer Name] and clic k [OK]. When [K onica IP-011] is not shown, select it fr om the list bo x.
Chapter 2 Setup IP-011 Printer Controller 2-13 Contents of Settings Details of each setting are described as follo ws; Items and their setting ranges shown on the screen and their descriptions are explained in detail. The underlined setting ranges indicate the default settings.
Chapter 2 Setup 2-14 IP-011 Printer Controller [Image]-[La yout]: 1-Up, 2-Up , 4-Up, 8-Up and 9-Up Specifies how man y pages of documents are gathered on one piece of paper . The def ault value , [1-Up(Def ault)], indicates that an one-page document is printed on one piece of paper .
Chapter 2 Setup IP-011 Printer Controller 2-15 [P aper] tab [F ront Cover]: On, Off, Blank and Printed Specifies whether a front cov er is attached or not. Also specifies whether the front cov er is blank or printed when it is attached. [Back Co v er]: On, Off , Blank and Printed Specifies whether a back co ver is attached or not.
Chapter 2 Setup 2-16 IP-011 Printer Controller [Print Quality] tab [Smoothing]: Off, T ype 1, T ype 2 and T ype 3 Specifies the smoothing type. This function is unav ailab le f or US.
Chapter 2 Setup IP-011 Printer Controller 2-17 [W atermark] tab [W ater mar k String]: None, CONFIDENTIAL, COPY , DRAFT , FILE COPY , FINAL, PROOF , T OP SECRET Specifies the watermark. [First P age Only] Prints the watermar k on the first page only .
Chapter 2 Setup 2-18 IP-011 Printer Controller [Edit/Add Watermark(Sub-Menu)] dialog bo x [Edit T e xt] Specifies [T e xt], [Font], [Siz e] and [Style]. [Darkness] Specifies the darkness of the edit text. [Angle]: -90 degrees to +90 deg rees Specifies the angle of the edit text.
Chapter 3 Printer Driver IP-011 Printer Controller 3-1 Chapter 3 Printer Driver ■ Contents of This Chapter ........................................................... 3-2 ■ Working En vironment .....................................................
Chapter 3 Printer Driver 3-2 IP-011 Printer Controller ■ Contents of This Chapter This chapter describes functions of the Printer Dr iver which is installed to computers from which the K onica 7020 .
Chapter 3 Printer Driver IP-011 Printer Controller 3-3 ■ W orking En vir onment ● Compliant OS The Printer Dr iv er can be used on the f ollowing OS. Windows 95 Windows 98 Windows NT 4.0 Windows 2000 (to be supported) Ref er to “2 Setup” (2-1 page) f or installation of the Printer Driver .
Chapter 3 Printer Driver 3-4 IP-011 Printer Controller [Help] When the [Help] button is clic k ed, Help of each tab will appear . [General] tab Enables a print test of a printer . [Details] tab P erf or ms settings related to por ts, drivers, timeout and spooling.
Chapter 3 Printer Driver IP-011 Printer Controller 3-5 ■ Printer Driver Function List The f ollowing list summarizes functions (Setting items) which can be set b y using the Printer Driver of the K onica 7020 series +IP-011 system.
Chapter 3 Printer Driver 3-6 IP-011 Printer Controller Classification Setting Items Set V alue Description 95/98 NT4.0 K onica La y out 1-Up (def ault): 2-Up, This function is used to print two pages , 7020 4-Up , 8-Up and 9-Up four pages , eight pages or nine pages special of documents on one piece of paper .
Chapter 3 Printer Driver IP-011 Printer Controller 3-7 Classification Setting Items Set V alue Description 95/98 NT4.0 Original paper USA / A3, A 4 , A4R, A 5 R , B5 R , The original paper you can set diff ers B5, Legal, LetterR, Letter, S t at ement depending on specifications in the country Europe / A 3 , A 4 , A 4 R , A 5 R , B4 and tr a ys .
Chapter 3 Printer Driver 3-8 IP-011 Printer Controller ■ Description of Printer Driver Functions (in the alphabetic or der) Functions (setting items) which can be set with the Printer Driver are summarized in the alphabetic order . These settings can be set by using [Start]-[Settings]-[Pr inters]- [K ONICA IP-011] proper ty .
Chapter 3 Printer Driver IP-011 Printer Controller 3-9 Back co ver By using [P aper] tab-[Bac k Cov er], you can perform the setting to use a designated tra y for printing the last page. Select either [On] or [Off]. Def ault of Back Co v er is [None].
Chapter 3 Printer Driver 3-10 IP-011 Printer Controller Copies Click the [ ▲ ] or [ ▼ ] button beside [Setup] tab-[Copies] or directly enter the number of copies from the ke yboard.
Chapter 3 Printer Driver IP-011 Printer Controller 3-11 Duplex printing By using [Setup] tab-[Duple x], you can perf or m settings of the Duple x printings. Y ou can select [1-Sided], [2-Sided Shor t Edge Binding], [2-Sided Long Edge Binding] or [Booklet] from the list shown b y clicking the [ ▼ ] button beside the [Duple x] box.
Chapter 3 Printer Driver 3-12 IP-011 Printer Controller End Capture When the vir tual printer por t is specified on the [End Capture] dialog shown b y clic king [Details] tab-[End Capture] button, y ou can delete a network printer allocated as a vir tual printer por t.
Chapter 3 Printer Driver IP-011 Printer Controller 3-13 Fr ont/Back Co ver- P aper T ray Specify the tra y f or F ront/Back Cover from the list sho wn by clicking the [ ▼ ] b utton beside the [P aper] tab-[F ront/Back Cov er]-[P aper T ra y] button.
Chapter 3 Printer Driver 3-14 IP-011 Printer Controller [8-Up] [9-Up] When [Booklet] is selected in the Duple x printing, [2-Up] is automatically selected and you can not select other settings. When [Setup] tab-[Print P age Borders] check bo x is selected, y ou can print borders between gathered documents.
Chapter 3 Printer Driver IP-011 Printer Controller 3-15 Orientation Select either [P or trait] or [Landscape] from the list shown b y clic king the [ ▼ ] button beside [Set up] tab-[Orientation] box.
Chapter 3 Printer Driver 3-16 IP-011 Printer Controller P aper type [Plain], [OHT Film], [OHT Interleav e] or [OHT Interleav e Pr inted] can be selected from the list shown by clic king the [ ▼ ] b utton beside [P aper] tab- [P aper T ype] bo x. When F ront/Bac k Cov er is set, you can select only Plain.
Chapter 3 Printer Driver IP-011 Printer Controller 3-17 Print using the f ollowing driver Select the driver used f or pr inting f or m the list shown b y clicking the [ ▼ ] button beside [Details] tab- [Print using the following driv er] bo x.
Chapter 3 Printer Driver 3-18 IP-011 Printer Controller Settings of the two-wa y comm unication function The [Spool Settings] dialog shown b y clic king the [Details] tab-[Spool settings] button enab les you to perf or m settings of spooling and the bi- directional communication function.
Chapter 3 Printer Driver IP-011 Printer Controller 3-19 Spool settings Set the method of spooling (temporary saving) the print data when it is sent to the printer on the [Spool Settings] dialog shown b y clic king [Detail] tab-[Spool Settings] button.
Chapter 3 Printer Driver 3-20 IP-011 Printer Controller In addition, when Staple is specified, you can not select Alternate. Y ou can not staple at two positions f or the paper of B5R or smaller .
Chapter 3 Printer Driver IP-011 Printer Controller 3-21 W atermark Selecting a watermark from the list of the [W ater mar k] tab enables y ou to print docu- ments with a watermark. When the Printer Driver is installed, the basic watermarks are installed at the same time.
Chapter 3 Printer Driver 3-22 IP-011 Printer Controller Driver Function Combination List Tray 1 Tray 2 Tray 3 Tray 4 Bypass Auto Select Plain OHT Film OHT Interleaved OHT Printed- interleaved Tray 1 T.
Chapter 3 Printer Driver IP-011 Printer Controller 3-23 On Off Sort Group 1 up 2 up 4 up 8 up 9 up On None Off 1-left 1-ri g ht 2-left 2-top A3 ҂ 쎻쎻 쎻 쎻 쎻 쎻 쎻 쎻 쎻쎻쎻쎻쎻쎻쎻 .
Chapter 3 Printer Driver 3-24 IP-011 Printer Controller 1 Side 2 Sides Short Edge Bindin g 2 Sides Long Edge Bindin g Booklet Off On Printed Non Printed Off On Printed Non Printed Tray 1 Tray 2 Tray 3.
Chapter 3 Printer Driver IP-011 Printer Controller 3-25 Plain Thick None 2 Trays 3 Trays 4 Trays None DB-209 DB-409 A3 쎻쎻 쎻 쎻 쎻 쎻 쎻 쎻 쎻 A4R 쎻쎻 쎻 쎻 쎻 쎻 쎻 쎻 쎻 A4 쎻.
IP-011 IP-011 Printer Controller 4-1 Chapter 4 Contr ol P anel Setup ■ Contents of This Chapter ............................................................ 4-2 ■ About the Control P anel ...........................................................
Chapter 4 Contr ol P anel Setup 4-2 IP-011 Printer Controller ■ Contents of This Chapter In this chapter describes the pr inter mode basic screen and the setup menu of the Copier Operation P anel. Refer to the oper ating manual of the copier f or other functions and screens of the Control Panel.
Chapter 4 Control P anel Setup IP-011 Printer Controller 4-3 ■ About the Contr ol P anel ● The Contr ol P anel of the Copier [SCANNER/PRINTER] button Switches to the printer mode. LCD Displa ys the status of the Printer Controller , menus related to settings and options to be selected are display ed on the LCD .
Chapter 4 Contr ol P anel Setup 4-4 IP-011 Printer Controller ● Ho w to Enter Settings on the LCD P anel Y ou can enter settings from the printer mode basic screen shown on the LCD by using either the item selection or the information entry .
Chapter 4 Control P anel Setup IP-011 Printer Controller 4-5 ● Printer Mode Basic Screen When the K onica 7020 series +IP-011 system star ts properly , the printer mode basic screen is display ed on the LCD by pressing the [SCANNER/PRINTER] b utton.
Chapter 4 Contr ol P anel Setup 4-6 IP-011 Printer Controller ● Printer Setting screen When “1. Setting” on the printer menu screen is selected, the Printer Setting screen is displa yed. When an item is selected on the Printer Setting screen, each setting screen corresponding to the selected item is display ed.
Chapter 4 Control P anel Setup IP-011 Printer Controller 4-7 ● Procedures of the Printer Setting The f ollo wing show the procedures of the printer setting by using the LCD P anel; Press the [SCANNER/PRINTER] button to show the printer mode basic screen.
Chapter 4 Contr ol P anel Setup 4-8 IP-011 Printer Controller Press the [Y es] button on the save preservation confirmation screen shown by pressing the [Main Men u] or [Previous] button to sa ve new settings. Press the [No] button not to sa ve the settings.
Chapter 4 Control P anel Setup IP-011 Printer Controller 4-9 ■ Configuration of Printer Setting Menu 1 Netw ork Setup *This menu is displa yed only when the KN-304 is attached.
Chapter 4 Contr ol P anel Setup 4-10 IP-011 Printer Controller 1 Off 2 On 3 Print Quality 4 I/O Timeout 5 T est Print 6 CMD Err or P a ge 7 Err or P age 8 F actory Default 9 Help 1 5 2 10 3 15 4 20 5 .
Chapter 4 Control P anel Setup IP-011 Printer Controller 4-11 ■ Functions of the Printer Setting ● Network Setup Select [1. Setting]-[1. Network Setup] on the Printer Setting screen to displa y the network setup screen. [1. Network setup] is display ed only when the KN-304 is attached.
Chapter 4 Contr ol P anel Setup 4-12 IP-011 Printer Controller ● Print Quality Select [1. Setting]-[3. Print Quality] on the Printer Setting screen to display the Print Quality Setup screen. Items of the Print Quality Setup screen are as follo w: [1.
Chapter 4 Control P anel Setup IP-011 Printer Controller 4-13 ● T est Print Select [1. Setting]-[5. T est Pr int] on the Printer Setting screen to displa y the T est Pr int Setup screen. Items of the T est Pr int Setup screen are as f ollows: [1. Demo/Configuration Page] Press [1] to print the Demo/Configuration P age immediately .
Chapter 4 Contr ol P anel Setup 4-14 IP-011 Printer Controller ● Factory Default Select [1. Setting]-[8. F actor y Default] on the printer mode basic screen to return various settings to the f actor y def ault.
IP-011 Printer Controller 5-1 Chapter 5 Status Monitor and Contr ol P anel ■ Contents of This Chapter ............................................................ 5-2 ■ Status Monitor and Control P anel ............................................
Chapter 5 Status Monitor and Contr ol P anel 5-2 IP-011 Printer Controller ■ Contents of This Chapter This chapter describes the Status Monitor and the Control Panel which are the Printer T ools.
Chapter 5 Status Monitor and Contr ol Panel IP-011 Printer Controller 5-3 ■ Status Monitor and Contr ol P anel The Printer T ools is the gener ic name of two programs , “Status Monitor” and “Control P anel” which are used on computers connected to the K onica 7020 series +IP-011 system.
Chapter 5 Status Monitor and Contr ol P anel 5-4 IP-011 Printer Controller ■ W orking En vir onment ● Compliant OS The Status Monitor and the Control P anel can be used on the f ollowing OS .
Chapter 5 Status Monitor and Contr ol Panel IP-011 Printer Controller 5-5 ■ How to Operate the Status Monitor ● Star ting the Status Monitor In the case that you set the Status Monitor to automatically start at the time of installing the Printer T ools, the Status Monitor automatically starts when a computer starts.
Chapter 5 Status Monitor and Contr ol P anel 5-6 IP-011 Printer Controller ● Show/Hide the Status Monitor When the [Close] button is c licked when the Status Monitor is display ed, the Status Monitor is hidden (displayed as an icon on the task bar .
Chapter 5 Status Monitor and Contr ol Panel IP-011 Printer Controller 5-7 ● Displa y Change Displa y of the Status Monitor can be selected from either [Expand] or [Reduce].
Chapter 5 Status Monitor and Contr ol P anel 5-8 IP-011 Printer Controller ■ Ho w to Operate the Contr ol P anel ● Starting the Control P anel Select [Printer Setting] fr om the [Setup] menu of the Status Monitor windo w . The [K onica IP-011 Control P anel] dialog is display ed.
Chapter 5 Status Monitor and Contr ol Panel IP-011 Printer Controller 5-9 ● Buttons of the Contr ol P anel [OK] When the [OK] button is clic ked, data of all settings of the tab is sent to the printer . Then, the [K onica IP-011 Control P anel] dialog is closed and the [Konica IP-011 Status Monitor] windo w is display ed.
Chapter 5 Status Monitor and Contr ol P anel 5-10 IP-011 Printer Controller ● Settings of P aper Click the [P aper] tab of the [Konica IP-011 Control P anel] dialog.
Chapter 5 Status Monitor and Contr ol Panel IP-011 Printer Controller 5-11 ● Printer Setting Click the [Printer Setting] tab of the [K onica IP-011 Control P anel] dialog. The [Printer Setting] tab of the [K onica IP-011 Control P anel] dialog is displayed.
Chapter 5 Status Monitor and Contr ol P anel 5-12 IP-011 Printer Controller ● T est Print Click the [T est Print] tab of the [Konica IP-011 Contr ol Panel] dialog. The [T est Print] tab of the [K onica IP-011 Control Panel] dialog is displa yed. Click the [Print Demo/Configuration P a ge] button to print the Print Demo/Configuration P age.
Appendix A T roubleshooting IP-011 Printer Controller Appendix A-1 Appendix A T roub le Shooting ■ Error Message ........................................................... Appendix A-2 ■ Basic T roub leshooting ...................................
Appendix A T r oubleshooting Appendix A-2 IP-011 Printer Controller ■ Err or Message The error messages shown on the Status Monitor are as f ollows: Error Message How to Recov er Mishandled paper in.
IP-011 Printer Controller Appendix A-3 ■ Basic T roubleshooting This section describes how to troubleshoot. If troubles are not remov ed by using the f ollowing counter measures, contact a service provider . There are some basic conditions which cause various abnormalities.
Appendix A T r oubleshooting Appendix A-4 IP-011 Printer Controller ● A message to demand a paper size which y ou do not use is displa y ed. Cancel the job to change the paper size of “Pa ge (Paper) Setup” dialog on an applica- tion. ● Y ou can not print the test print Check the LCD of the copier Contr ol P anel.
IP-011 Printer Controller Appendix A-5 ● The print setting of a job does not correspond to the result of printing. Check that the printer setting is not changed. Refer to “5 Status Monitor and Contr ol Panel” Printer Setting “(5-11 page) or ”3 Printer Driver “ Printer Driver Function List” for the printer setting.
Appendix B Product Specifications IP-011 Printer Controller Appendix B-1 Appendix B Pr oduct Specifications ■ Product Specifications ................
Appendix B Pr oduct Specifications Appendix B-2 IP-011 Printer Controllerg ■ Pr oduct Specifications Model: b uilt in the K onica 7020 series Copier P aper Y ou can select from the following paper s.
Appendix B Product Specifications IP-011 Printer Controller Appendix B-3 Network Interface (Option): KN304: Ethernet (100Base-T / 10Base-T) Protocol: IPX/SPX (NetWare) LPD/LPR (TCP/IP) P eer to P eer (TCP/IP) Compliant OS: Windows 95/98 Windows NT4.0 Windows 2000(to be supported) Printer Language: Destiny WinStylerNozomi V ersion 2.
index IP-011 Printer Controller index-1 index inde x ........................................................................................ index-2.
index inde x-2 IP-011 Printer Controller index A About .............................................................. 3-8 Add P or t ......................................................... 3-8 Allocate a printer por t ...............................
index IP-011 Printer Controller index-3 P aper-Or iginal Paper .................................... 3-16 P or t settings ................................................. 3-16 Print page borders ....................................... 3-16 Print Quality .
.
2000. 1 1 MA UF ACTURER K ONICA CORPORA TION T OKY O JAP AN.
Ein wichtiger Punkt beim Kauf des Geräts Konica Minolta IP-011 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Konica Minolta IP-011 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Konica Minolta IP-011 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Konica Minolta IP-011 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Konica Minolta IP-011 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Konica Minolta IP-011 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Konica Minolta IP-011 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Konica Minolta IP-011. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Konica Minolta IP-011 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
