Benutzeranleitung / Produktwartung C10P des Produzenten Konica Minolta
Zur Seite of 168
bizhub C10P User’s Guide A00V-9574-00A.
Trademarks KONICA MINOL T A and the KONICA MINO L T A logo are trademarks or registered trademarks of KONICA MINOL T A HOLDINGS, INC. PageScope and bizhub are registere d trademarks or trademarks of KONICA MINOL T A BUSINESS TECHNOLOGIES, INC All other tradema rks and registered trademark s are the prop erty of their respective owners.
SOFTWARE LICENSE AGREEMENT This package contains the following materials provided by Konica Minolta Business T echnolo - gies, Inc. (KMBT): software included as part of the printing system, the digita.
1 1. Notice to Government End Users: The Software is a “commercial item,” as that term is defined at 48 C.F .R.2.101, consisting of “commercial computer software” and “commercial computer software documentation,” as such terms are used in 48 C.
4. DISCLAIMER OF W ARRANTY Adobe licenses the Software to you on an “AS IS” b asis. Adobe makes no representation as to the adequacy of the Software for any particular pur - pose or to produce any particular result.
9. GOVERNING LA W This Agreement will be gov erned b y and construed in accordance with the substantive laws in force in the S tate of California as such laws are applied to agree - ments entered into and to be performed entirely within Califor nia between California resi - dents.
5. All company names and product names used in this document is the trademarks or regis - tered trademarks of their respective holder. This ICC Profile made by GretagMacbeth Profil eMaker and granted TOYO INK certain license to distribute by GretagMacbeth AG .
.
Contents Contents i 1 Introduction ... ............... ................ .............. ................. .............. ................. ....... 1 Getting Acquainted with Your Printer 2 Space Requirements 2 Printer Parts 3 Front View 3 Rear View 4 Front View with Options 4 Rear View with Options 4 2 About the Software .
Contents ii Windows XP/Server 2003 12 Windows 2000/NT 4.0 12 Using the PostScri pt and PCL Printer Driver 13 Common Buttons 13 OK 13 Cancel 13 Apply 13 Help 13 Easy Set 14 Paper View 14 Printer View 1.
Contents iii SYSTEM DEFAULT MENU 42 SERVICE MENU 47 LANGUAGE MENU 47 5 Using Media ............ ................. .............. ................. ....
Contents iv 8 Troubleshooting ............. ................. .............. .............. ................. .............. ... 103 Introd uction 104 Printing a Conf iguration Page 104 Preventing Med.
Introduction.
Getting Acquainted with Your Printer 2 Getting Acquainted with Your Printer Space Requirements T o ensure easy operation, consum able replacement and maintenance, adhere to the recommended space requirements detailed below . " The options appe ar shaded in the a bove illustration.
Getting Acquainted wi th Your Printer 3 Printer Parts The following drawing s illustrate the parts of your printer refe rred to through - out this guide, so please take some time to become familiar with them.
Getting Acquainted with Your Printer 4 Rear View 1—USB port 2—Parallel port 3—10Base-T/100Base-TX (IEEE 802.3) Ethernet Interface po rt Front View with Options 1—Tray 2 Rear View with Op tions.
About the Software.
Software Utilities CD-ROM 6 Software Utilities CD-ROM PostScript Drivers " A specific PPD file has been prepar ed for applications (such a s Page - Maker and Corel Draw) t hat require that a PPD file be specified wh en printing. When specifying a PPD file while printing on Windows XP , Server 2003, 2000 and NT 4.
Software Utilities CD-ROM 7 PPD Files " For details on the installation of the Windows printer drivers, refer to the bizhub C10P Installation Guide on the Documentation CD-ROM. Utilities Operating System Use/Benefit Macintosh OS 9/X These files are required in order to use the printer driver for each operat - ing system.
Software Utilities CD-ROM 8 PageScope Net Care Printer management functio ns such as status monitoring and network settings can be accessed. For details, refer to the PageScope Net Care Quick Guide on the Do cu - mentation CD-ROM.
System Requirements 9 System Requirements Personal co mputer – Pentium 2: 400 MHz (Pentium 3: 50 0 MHz or higher i s recommended) – Power Mac G3 or later (G4 or later is recommended) – Intel.
Selecting Driver Options /Defaults (for Windows) 10 Selecting Driver Options/Defaults (for Windows) Before you start working with your printer , you are advised to verify/chan ge the default driver settings. Also, in case you have options installed, you should “declare” the opti ons in the driver .
Uninstalling the Printer Driver (for Windows) 11 " With Windows NT 4.0, right-cli ck the KONICA MINOL T A bizhub C10P PCL6 printer icon in the Printers directory , and then click Document Defaults . Skip to step 10. 8 Select the General tab .
Displaying Printer Driver Settings (for Windows) 12 8 Restart your computer . 9 The KONICA MINOL T A bizhub C1 0P prin ter driver will be uninstalled from your computer . Displaying Printer Driver Settings (for Windows) Windows XP/Server 2003 1 From the Star t menu, choose Printer s and Faxes to display the Printers and Faxes directo ry .
Using the PostScript and PCL Printer Driver 13 Using the PostScript and PCL Printer Driver Common Buttons The buttons described below appear on ea ch tab. OK Click to exit the Properties dialog box, saving any changes made. Cancel Click to exit the Properties dial og box without saving any changes made.
Using the PostScript and PCL Printer Driver 14 Easy Set T o save the current settings, enter a name, and then click Save . Afterward, the saved settings can be selecte d from the drop-down list. T o change the registered setting, click Edit . Select Defaults from the drop-down list to reset the functions in all tabs to their default values.
Using the PostScript and PCL Printer Driver 15 Advanced Tab (PostScript Printer Driver Only) The Advanced T ab allows you to S pecify the PostScript output method S pecify whether or not the e.
Using the PostScript and PCL Printer Driver 16 Cover Page Tab The Cover Page T ab allows you to Print front and b ack cover pages and separator pages S pecify the paper tray that cont ains the.
Using the PostScript and PCL Printer Driver 17 Quality Tab The Quality T ab allows you to Switch between color and grayscale pr inting S pecify the printer color settings (Quick Color) S p.
Using the PostScript and PCL Printer Driver 18.
Using the Status Monitor (Windows Only).
Working with the Status Monitor 20 Working with the Status Monitor Introduction The S tatus Monitor shows information ab out the current status of the printer . The S tatus Monitor can be installed from the Software Utilities CD-ROM. For details on the installation, refer to the bizhub C10P Reference Guide on the Documentation CD-ROM.
Recognizing Status Monitor Alerts 21 Recovery Instructio ns —Provides you with explana tions of what you need to do in order to correct problems a nd recover from error conditions. Consumables T a b Displays the usage status (approximate p ercentage remaining) of each tone r consumables.
.
Printer Control Panel and Configuration Menu.
About the Control Panel 24 About the Control Panel The control panel, located on the top of the printer , allows you to direct the printer ’s operation. In addition, it displays the current status of the printer , including any condition th at needs your attention.
About the Control Panel 25 No. Key Function 3 Moves up in the menu structure Within a menu choice that is changeable char - acter by character , scrolls upward throug h the available characters 4 Moves right in the menu structure Moves right through the available menu choices 5 Moves down in the menu structure.
About the Control Panel 26 Toner Supply Indicators The indicators shown belo w will appear , indicating the amount of toner that remains in the yellow (Y), magenta (M), cyan (C), and black (K) toner car - tridges.
Configuration Menu Overview 27 Configuration Menu Overview The bizhub C10P configuration menu accessible from th e control panel is structured as shown below .
Configuration Menu Overview 28 PROOF/PRINT MEN U " This menu item appears only if an optional hard disk is installed. With this menu item, print jobs that were set to be saved on the hard disk by using Job Retention on the Basic tab of the printer driver can be printe d or deleted .
Configuration Menu Overview 29 Entering the Password In order to p rint or delete a secu red job, the f our-digit pa ssword specifie d from the printer driver must be entered. Fo llow the procedure described b elow to type in the four-digit password s pecified from the printer driver .
Configuration Menu Overview 30 PRINT MENU With this menu, printer information, such as the configuration page and the demo p age, can be prin ted. " All factory default values are sh own in bold. MENU MAP Settings YES /NO Prints the menu map.
Configuration Menu Overview 31 PAPER MENU With this menu, the media used for printing can be managed. " * This menu item appears only if the duplex option is installed. ** These menu items appear only if the opti onal lower feeder u nit is installed.
Configuration Menu Overview 32 " All factory default values are sh own in bold. INPUT TRAY TRAY 1 MODE Settings AUTO /CASSETTE When printing from Tray 1, select whether the paper size and pap.
Configuration Menu Overview 33 TRAY 2 MEDIA SIZE Settings LETTER / A4 Select the setting fo r the size of paper loaded into Tray 2. " The default setting for No rth America is LETTER . The default setting for all other re gions is A4 . MEDIA TYPE Settings PLAIN PAPER / LETTERHEAD Select the setting for the type of paper loaded into Tray 2.
Configuration Menu Overview 34 TRAY CHAINING Settings YES /NO If YES is selected and the specified paper tray runs out of paper during printing, a paper tray loaded with paper of the same size is automatically selected so printing can continue. If NO is selected and the specified paper tray runs out of paper , printing stops.
Configuration Menu Overview 35 QUALITY MENU With this menu, settings for the print quality can be specified. BLACK CYAN MAGENTA TONER OUT ACTIO N REPLACE TONER AIDC REQUEST AIDC QUALITY MENU YELLOW BL.
Configuration Menu Overview 36 " All factory default values are sh own in bold. REPLACE TONER BLACK Settings YES /NO When YES is selected, the carousel rotates to the black toner cartridge, so that it can be replaced. For details on replacing the toner cartrid ge, refer to “Replacing a T oner Cartridge” on page 78 .
Configuration Menu Overview 37 AIDC REQUEST AIDC Settings NO /YES If YES is selected, image adju stments are performed. MODE Settings ON /OFF If ON is selected, the image adju stments are applied. If OFF is selected, image adju stments are not applied.
Configuration Menu Overview 38 INTERFACE MENU With this menu, interface settings can be specified. " Restart the printer af ter chang ing settings in the ETHERNET menu.
Configuration Menu Overview 39 " All factory default val ues are shown in bold. ETHER - NET TCPIP ENABLE Settings YES /NO If YES is selected, TCP/IP is enabled. If NO is selected, TCP/IP is disabled. DHCP/ BOOTP Settings YES /NO Select whether or not the IP address is automatically acquired.
Configuration Menu Overview 40 SUBNET MASK Setting 0.0.0.0 S pecify the subnet mask for the network. Use the Up, Down, Left, and Right keys to specify the value. ENABLE HTTP Setting YES /NO S pecify whether or not HTTP is used. If YES is selected, the Web page pro - vided to the printer by the built-in HTTP server is enabled.
Configuration Menu Overview 41 NET ZONE Settings , S pecify the Macintosh EtherT al k zone. The zone name can contain a maximum of 16 charact ers. NET ZONE2 Settings - S pecify the Macintosh EtherT al k zone. The zone name can contain a maximum of 16 charact ers.
Configuration Menu Overview 42 SYSTEM DEFAULT MENU With this menu, settings can be specifie d to adjust the operati on of the printer , such as the time until the machine enters Energy Saver mode.
Configuration Menu Overview 43 " * These menu items appear only if an optional hard disk is installed. ** This menu item appears only on 120 V units. " All factory default val ues are shown in bold. PRINT QUAL - ITY Settings HIGH /STANDARD Select the image quality for prints.
Configuration Menu Overview 44 PCL LINE TERMI - NATION Settings CR=CR LF=CRLF / CR=CR LF=LF/ CR=CRLF LF=LF/ CR=CRLF LF=CRLF Select the definitions of the CR/L F codes in the PCL language. FONT PITCH SIZE Settings 44- 1000 -9999 S pecify the bitmap font size in the PCL language .
Configuration Menu Overview 45 SYSSTART Settings NO /YES Select whether or not the PostScript format definitions file is applied when the printer is tu rned on. If YES is selected, the PostSc ript format definitions file is applied. If NO is selected, the PostSc ript format definitions file is not applied.
Configuration Menu Overview 46 SECU - RITY CONFIG ENABLE Settings OFF /ON Select whether or not the menus are protected with a password. If ON is selected, all menus are protected with a password. SET PASS - WORD Settings SYSADMIN S pecify the password for displaying the menus.
Configuration Menu Overview 47 SERVICE MENU With this menu, the service representa tive can adjust the printer and perform maintenance operatio ns. This me nu cannot be used by th e user . LANGUAGE MENU RESTORE /SAVE RESTORE FACTORY Settings NO /YES Select whether or not all menu items are reset to their initial settings.
Configuration Menu Overview 48.
Using Media.
Media Specifications 50 Media Specifications What types and sizes of media can I load? " For custom sizes, use the printer dr iver to specify the setti ngs within the ranges shown in the above table. Media Media Size T ray* Du plex Inch Millimeter A4 8.
Media Types 51 Media Types Before purchasing a l arge quantity of special me dia, do a trial print with the same media and check the print quality . Keep media on a flat, level surface in its original wrapper until it is time to load it. For a list of approved media, refer to printer .
Media Types 52 " Keep media between 35% and 85% relative humidity . T oner does not adhere well to moist or wet paper. Layered Adhesive Folded, creased, curled, e mbossed, warped,.
Media Types 53 DO NOT use thic k stock that is Mixed with any othe r media in the tra ys (as this will caus e printer misfeed - ing) Envelopes Print on the front (address) side only . Some parts of the envelope consist of three layers of p aper—the front, back, and flap.
Media Types 54 Labels A sheet of labels consists of a face sh eet (the printing su rface), adhesive, and a carrier sheet: The face sheet must follow t he pl ain paper specification. The face sh eet surface must cover the entire carrier sheet, and no ad he - sive should come through on the surface.
Media Types 55 Letterhead T ry printing your data on a sheet of plain paper first to che ck placement. Postcards T ry printing your data on a sheet of plain paper fi rst to check placemen t.
Media Types 56 Use postcards that are Approved f or laser printers DO NOT use postcards that are Coated Designed for inkjet printers Precut or perforat ed Preprinted or multicolored " If the postcard is warped, press on the warped area before putting it in T ray 1.
Media Types 57 " If you have problems feedin g 50 sheets, try loading only 1–10 sheets at a time. Loading a large number of transparencies at one time may cause static buildup, causing feeding problems. " Always first test a small qua ntity of a particular type of transp arency .
Media Types 58 What Is the Guaranteed Imageable (Printable) Area? The printable area on all media sizes is up to 4 mm (0.157") from the edges of the media. Each media size ha s a specific imag e - able area, the maximum area o n which the printer can print cle arly and without distortion.
Loading Media 59 Loading Media How do I load media? T ake off the top and bottom sheets of a ream of paper . Holding a stack of approx - imately 200 sheets at a time, fan the stack to prevent static buildup before inserting it in a tray . " Do not fan transparencies.
Loading Media 60 2 Slide the media guides to pro - vide more space between them. 3 Load the paper face up in the tray . " Do not load paper above the M mark. Up to 200 sheets (80 g/m 2 [22 lb]) of plain paper can be loaded into the tray at one time.
Loading Media 61 4 Slide the media guides against the edges of the paper . 5 Close the front panel of T ray 1 tray , and then reattach the lid. Other Media When loading media other than plain paper , set the media mod e (for exam - ple, Envelope, Glossy , Label, Thick S tock or T ransparency) in the driver for optimum pri nt quality .
Loading Media 62 Loading Envelopes 1 Remove the lid from Tray 1, and then open the front panel of Tr a y 1. 2 Remove any media from the tray . 3 Slide the media guides to pro - vide more space between them. 4 Load the envelopes flap side down in the tray .
Loading Media 63 " For envelopes with the flap along the long edge, load the envelopes with the flap toward the left of the printer. 5 Slide the media guides against the edges of the envelo pes. 6 Close the front panel of T ray 1 tray , and then reattach the lid.
Loading Media 64 7 Pull the lever , and then open the top cover . " If there is paper in the output tray , remove it. Fold up the o utput tray before opening the top cover . " Do not touc h the transfer belt. 8 Raise the fuser separator levers on the fuser unit.
Loading Media 65 Note Since a media misfeed or decreased prin t quality may occur , be sure to return the levers on the fuser unit to the setting for plain p aper before printing on media other than envelopes.
Loading Media 66 Loading Labels/Postcard/Thick Stock/Glossy Stock and Transparency 1 Remove the lid from Tray 1, and then open the front panel of Tr a y 1. 2 Remove any media from the tray . 3 Slide the media guides to pro - vide more space between them.
Loading Media 67 5 Slide the media guides against the edges of the media. 6 Close the front panel of T ray 1 tray , and then reattach the lid. Tray 2 Loading Plain Paper 1 Pull out T ray 2 as far as possi - ble.
Loading Media 68 2 Lift up T ray 2 to remove it. 3 Remove the lid from T ray 2. 4 Press down the media pressure plate to lock it into place..
Loading Media 69 5 Load the paper face up in the tray . " Do not load above the 100% line. Up to 500 sheets (80 g/m 2 [22 lb]) of plain paper can be loaded into the tray at one time.
Loading Media 70 7 Reinsert T ray 2 into the printer ..
Duplexing 71 Duplexing Select paper with high opacity for dupl ex (double sided) printing. Opacity refers to how effectively paper blocks out what is written on the opposite side of the page. If the paper has low opacity (high translucency), the n the printed data from one side of the page will show through to the other side.
Output Tray 72 In addition, if “N-up” has been set to “Booklet”, autodupl ex printing is per - formed. The following Order settings are available whe n “Booklet” is selected. 1 Load plain paper into the tray . 2 From the printer driver , specify the layout for duplex printing.
Media Storage 73 Media Storage How do I store media? Keep media on a flat, level surface in its original wrapper until it is time to load it. Media that has been stored for a long time out of its packaging may dry up too much and cause misfeeding.
Media Storage 74.
Replacing Consumables.
Replacing Consumables 76 Replacing Consumables Note Failure to f ollow instructions as outli ned in this manual coul d result in voiding your warranty . About Toner Cartridges Y our printer uses four to ner cartridge s: black, yellow , magenta, and cyan.
Replacing Consumables 77 When replacing a toner cartridge, refer to the followi ng table. For optimum print quality and performance, use o nly approved KONICA MINOL T A toner cartridges for your specific printer ty pe, as listed in the table below .
Replacing Consumables 78 Replacing a Toner Cartridge Note Be careful not to spill toner while replacing a ton er cartridge. If toner spills, immediately wipe it off with a sof t, dry cloth.
Replacing Consumables 79 2 Pull the lever , and then open the top cover . " If there is paper in the output tray , remove it . Fold up the output tray before opening the top cover . " Do not touch the transfe r belt. 3 Open the front cover and check that the toner cartridge to be replaced has ro tated to the exchange position .
Replacing Consumables 80 " Y ou can identify the toner ca rtridge by the color of the handle and by the letter molded into the handle: C (cyan), M (magenta), Y (yel - low) and K (black). 4 Pull the handle on the toner ca r - tridge toward you, and th en pull the toner cartridge up to remove it.
Replacing Consumables 81 7 Remove the cover from the toner roller . " Do not touch or scratch the toner roller. 8 Align the shaft on each end of the toner cartridge with its hold - ers, and then i nsert the car - tridge.
Replacing Consumables 82 10 Close the front cover . 11 Carefully close the top cover . " The printer must complete a calibra tion cycle (less than 2 minutes) after the toner cartridge has been re placed. If you open the top cover before the message IDLE appears, the printer sto ps and repeats the calibration cycle.
Replacing Consumables 83 Replacing the Drum Cartridge 1 Pull the lever , and then open the top cover . " If there is paper in the output tray , remove it . Fold up the output tray before opening the top cover . " Do not touch the transfe r belt.
Replacing Consumables 84 3 Prepare a new drum cartridge. " Do not touch th e PC drum on the drum ca r - tridge. 4 Install the new drum cartridge.
Replacing Consumables 85 5 Carefully close the top cover . " The printer must comp lete a calibration cycle (less than 2 minutes) after the drum cartridge has be en replaced. If you open the top cover before the message IDLE appears, the printer stops and repeats the calibration cycle.
Replacing Consumables 86 Replacing the Backup Battery If the backup battery is dead, the printe r ’s date and time cannot be retained. Follow the procedure described below to replace the backup battery . Note It’ s very important to protect the printer co ntroller board an d any associated circu it boards from ele ctrostatic damage.
Replacing Consumables 87 3 Remove the rear panel. " Since there are two hooks on the rig ht side of the panel, remove the rear panel by slightly pull - ing the lef t side of the panel toward you, then sliding the panel off to the left. 4 While holding the tab on the hard disk m ounting pin sl id to the left, remove the hard disk.
Replacing Consumables 88 6 Install a new backup battery . " When installing the new backup battery , make sure that the + side faces up. 7 Attach the hard disk to the printer controller boa rd. 8 Reinstall the panel and tighten the screw . " If you removed the duplex option in step1, reinstall it.
Replacing Consumables 89 10 Reconnect the power cord, an d turn on the printer . 11 From the control panel, select SYSTEM DEFAULT/DATE & TIME , and then set the d ate and time.
Replacing Consumables 90.
Maintaining the Printer.
Maintaining the Printer 92 Maintaining the Printer CAUTION Read all caution and warning lab els ca refully , making sure to follow any instructions contained in them. These labels are located on the inside of the printer ’s covers and the interior of the printer b ody .
Maintaining the Printer 93 Do not leave the printer ’s covers open for any length of time , especially in well-lit places; light may damage the drum cartridge. Do not open the printer during prin ting. Do not tap media st acks on the printer .
Cleaning the Printer 94 Cleaning the Printer CAUTION Be sure to turn off the printer and u nplug the powe r cord before cleaning. Exterior Ready Error Menu Select Cancel Cancel K C M Y T oner Control .
Cleaning the Printer 95 Interior Cleaning the Media Feed Roller and Laser Lens 1 Pull the lever , and then open the top cover . " If there is paper in the output tray , remove it . Fold up the output tray before opening the top cover . " Do not touch the transfe r belt.
Cleaning the Printer 96 Note Position the removed drum cartr idge as shown in the il lustration at th e right. Be sure to keep the drum cartridge horizont al and place it w here it will not become dirty .
Cleaning the Printer 97 4 Clean the laser lens by wiping it with a soft, dry cloth. 5 Reinstall the drum cartridge. BOTTOM VIEW.
Cleaning the Printer 98 6 Carefully close the top cover . Cleaning the Duplex Option Feed Rollers 1 Open the duplex cover . 2 Clean the feed rollers by wiping them with a soft, dry cloth.
Cleaning the Printer 99 3 Carefully close the duplex cover . Cleaning the Media Feed Rollers for Tray 2 1 Lift the printer off of T ray 2 and temporarily place it on a sturdy flat surface. 2 Clean the media feed rollers by wiping them with a soft, dry cloth.
Storing the Printer 100 3 Lift the printer and reinstall it on top of T ray 2. Storing the Printer Note If this printer is not to be used for an extend ed period of time, store the printer with the fuser separator levers raised (set to the envelope position).
Storing the Printer 101 Note Since a media misfeed or decreased prin t quality may occur , be sure to return the levers on the fuser unit to the setting for plai n pa per before printing on media o ther than envelopes.
Storing the Printer 102.
Troublesho oting.
Introduction 104 Introduction This chapter provides information to aid you i n resolving printer problems yo u may encounter , or at least guide you to the proper sources for help . Printin g a Configuration Page Print a configuration page to verify the printer is configured correctly .
Preventing Media Misfeeds 105 Preventing Media Misfeeds Make sure that... Media matches the printer specifications. Media is flat, especiall y on the leading edge. The printer is on a hard, flat, level surface. Y ou store media in a dry location away from moisture and humidi ty .
Understanding th e Media Path 106 Understanding the Media Path Understanding the printer ’s media path will help you locate media misfeeds. 1 Output tray 2 T ransfer belt unit 3 T o ner cartridge ca.
Clearing Media Misfeeds 107 Media Misfeed Messages and Clearing Procedures Clearing a Media Misfeed in the Pri nter 1 Pull the lever , and then open the top cover . " If there is paper in the output tray , remove it . Fold up the output tray before opening the top cover .
Clearing Media Misfeeds 108 2 Carefully pull out the drum car - tridge. Note Position the removed drum cartr idge as shown in the il lustration at th e right. Be sure to keep the drum cartridge horizont al and place it w here it will not become dirty .
Clearing Media Misfeeds 109 4 Remove any misfed media. " Always remove the mis - fed media in the feed direction as shown only . If it is difficul t to remove the media from the fuser unit, raise the fuser sepa - rator levers to the posi - tion for envelope printing, and then remo ve the media.
Clearing Media Misfeeds 110 5 Return the fuser separator levers to their original positi ons. 6 Reinstall the drum cartridge..
Clearing Media Misfeeds 111 7 Carefully close the top cover ..
Clearing Media Misfeeds 112 Clearing a Media Misfeed From Tray 2 1 Pull out T ray 2 as far as possi - ble. 2 Lift up T ray 2 to remove it. 3 Remove any misfed paper .
Clearing Media Misfeeds 113 4 Remove the lid from Tray 2, and then remove all paper from the tray . 5 Fan the paper , and align its edges. 6 Load the media in Tray 2, and attach the lid.
Clearing Media Misfeeds 114 7 Reinsert T ray 2. Clearing a Media Misfeed from the Duple x Option 1 Open the duplex cover . 2 Carefully pull o ut the misfed media.
Clearing Media Misfeeds 115 3 Close the duplex cover ..
Solving Problems with Media Misfeeds 116 Solving Problems with Media Misfeeds " Frequent misfeeds in any area indicate that area should be checked , repaired, or cleaned. Repeated misf ee ds may also happen if you’re using unsupported pri nt media.
Solving Problems wi th Media Misfeeds 117 Media is misfeeding. The media is not cor - rectly positioned in the tray . Remove the misfed media an d reposi - tion the media properly in the tray . The numb er of sheet s in the tray exceeds the maximum allowed.
Solving Problems with Media Misfeeds 118 Media is misfeeding. T ransparencies have collected static elec - tricity in the tray . Remove the transparencies and load them in T ray 1 one sheet a t a time. Do not fan transparencies before loading them. Unsupported media (wrong size, thick - ness, type, etc.
Solving Other Problems 119 Solving Other Problems Symptom Cause Solution Printer power is not on. The power cord is not correctly plugged into the outlet. T urn off the printer , confirm that the power cord is correctly plugge d into the outlet, and then turn on the printer .
Solving Other Problems 120 Printing takes too much time. The printer is set to a slow printing mo de (for example, thick stock or transpar - ency). It takes more time to print with special media. When using regular paper , make sure that the media type is set properly in the driver .
Solving Other Problems 121 Not all pages print. The Cancel key was pressed. Make sure no one pressed th e Cancel key while your job was printing. The tray is empty . Check that the tray i s loaded with media, in place, and secure. A document is printed with an overlay file which has been cre - ated by a non-bizhub C10P driver .
Solving Other Problems 122 Y ou hear unusual noises. The printer is not level. Place the printer on a flat, hard, level surface. The tray is not installed correctly . Remove the tray th at you are printing from and reinsert it completely into the printer .
Solving Problems with Printing Quality 123 Solving Problems with Printing Quality Symptom Cause Solution Nothing is printed, or there are blank spots on the printed page. One or more of the toner cartridges may be defective. Remove the toner cartridges an d check if any is damaged.
Solving Problems with Printing Quality 124 Image is too light; there is low image density . Laser lens is dirty . Clean the laser lens. The media is moi st from humidity . Remove the moist media and replace with new , dry me dia. There is not much toner left in the car - tridge.
Solving Problems with Printing Quality 125 The print or color density is uneven. One or more of the toner cartridges may be defective or low . Remove the toner cartridges an d check for damage. If it is damaged, replace it. The drum cartridge is defective.
Solving Problems with Printing Quality 126 There are toner smudges or residual images. One or more of the toner cartridges are defective or in stalled incorrectly . Remove the toner cartridges and check each for damage. If one or more is damaged, replace it.
Solving Problems with Printing Quality 127 Image defects. The laser lens is dirty . C lean the laser lens. A toner cartridge may be leaking. Remove the toner cartridges an d check for damage. If it is damaged, replace it. A toner cartridge may be defective.
Solving Problems with Printing Quality 128 If the problem is not resolved, even after all of the above have been per - formed, contact T echnical Support with the error information. For contact information, refer to the Need Assistance Sheet. The color has a poor reproduction or has poor color density .
Status, Error, and Service Messages 129 Status, Error, and Service Messages S tatus, error , and service me ssages are displayed in the control panel mes - sage window .
Status, Error, an d Service Messages 130 Error Messages (Warning) PROCESSING The printer is processing data. No action needed. bizhub C10P STARTING SYSTEM The printer is being started up. WARMING UP The printer is warming up. This message... means... do this.
Status, Error, and Service Messages 131 PAPER MISMATCH When using T ray 1: The paper size set from the printer drive r is different from the size of paper loaded into T ray 1. This message appears when PAPER MENU/ INPUT TRAY/ TRAY 1 MODE is set to AUTO and AUTO CONTINUE is set to OFF .
Status, Error, an d Service Messages 132 Error Messages (Operator Call) This message... means... do this... DISK ERROR The hard disk is full o r dam - aged. Initialize the hard disk o r , if the error continues to occur , replace the hard disk. T o initialize the hard disk, select SYSTEM DEFAULT/ FORMAT/FORMAT DISK .
Status, Error, and Service Messages 133 PAPER JAM TRAY X Media has misfed while being pulled from the specified tray ( X ). Locate and remove th e mis - feed. PUT “SIZE” “TYPE” IN TRAY 1 The paper size set from the printer driver is d ifferent from the size of paper loaded into T ray 1.
Status, Error, an d Service Messages 134 Service Messages These messages indicate a mo re serious error that can only be corrected by a customer service e ngineer . If one of these messages appe ars, turn the printer off, then turn it on again. If the problem persist s, contact your local vendor or authorized service provider .
Installing Accessories.
Introduction 136 Introduction Note Use of accessories no t manufactured or sup ported by KONICA MINOL T A will void your warranty . This chapter provide s information about the following a ccessories. Note Installing accessories always requires that the printer and accesso ries are turned off and unplug ged during in stallation.
Dual In-Line Memory Module (DIMM) 137 Dual In-Line Memory Module (DIMM) A dual in-line memory module (or DIMM) is a compact circuit board with sur - face-mount memory chips.
Dual In-Line Memory Module (DIMM) 138 2 Using a screwdriver , remove the screw on the back of the printer . 3 Remove the rear panel. " Since there are two hooks on the right side of the panel, remove the rear panel by slightly pull - ing the left side of the panel toward you, then sliding the panel off to the lef t.
Dual In-Line Memory Module (DIMM) 139 6 Reconnect all interfac e cables. 7 Reconnect the power cord, an d turn on the printer . 8 Declare the additional RAM in the Wi n dows printer driver (Properties/Con - figure t ab, see Page 10 ).
Hard Disk 140 Hard Disk If a hard disk is installed, fonts c an be downloaded and saved, and the over - lay function can be used. Installing a Hard Disk Note It’ s very important to protect the printer co ntroller board an d any associated circu it boards from ele ctrostatic damage.
Hard Disk 141 3 Remove the rear panel. " Since there are two hooks on the rig ht side of the panel, remove the rear panel by slightly pull - ing the lef t side of the panel toward you, then sliding the panel off to the left. 4 Attach the mounting pin on the printer controller board.
Hard Disk 142 6 Attach the hard disk to the printer controller boa rd. 7 Reinstall the panel and tighten the screw . " If you removed the duplex option in step1, reinstall it. 8 Reconnect all interface cables. 9 Reconnect the power cord, and turn on the printer .
Duplex Option 143 Duplex Option Duplex (Double Sided) printing can be performed au tomatically with the duplex option and enough memory installed. See “Required Memory during Printing” on p age 137 . Installing the Duplex Option 1 T urn off the printer .
Duplex Option 144 2 Remove the two knockout plates and the tape. 3 Prepare the duplex option. " Before installing the duplex option, open the duplex cover and check that the knob is posi - tioned vertically . After checking the knob, close the cover .
Duplex Option 145 4 Install the duplex option. Note When attaching the duplex option, att a ch the bottom of the option first, as shown. If the duplex option is attached incorrectly , it may be damaged.
Duplex Option 146 6 While pushing in the knob s, turn them clockwise until they are horizontal. The duplex option is secured in place. " Make sure that both knobs are securely locked. 7 Close the dup lex cover . 8 Declare the d uplex in the W in - dows printer driver (Properties/Configure tab, see Page 10 ).
Tray 2 147 Tray 2 If T ray 2 is installed, up to 500 additional sheets of A4/Letter-size paper can be loaded. Installing Tray 2 Note Since consumables a re installed in the printer , be sure to keep the printer level when moving it in order to preven t accidental spills.
Tray 2 148 3 Lift the printer and place it on top of T ray 2, making sure that the positioning pins on Tray 2 cor - rectly fit into the holes in the bot - tom of the printer . 4 Declare the T ray 2 in the Windows printer driver (Properties/Con figure tab , s ee Page 10 ).
Appendix.
Safety Specifications 150 Safety Specifications Technical Specifications Printer Printer Safety standards U.S. model UL 60950-1 , CSA C22.2 No. 60950-1-03 European model EU Directive 73/23/EEC EU Directive 93/68/EEC EN 60950-1 (IEC 60950-1) China model GB 4943 EMC standards U.
Technical Specifications 151 Print speed Simplex Monochrome: 20.0 pages per minute for A4, Letter (pl ain pape r) Full color: 5.0 pages per minute for A4, Letter (pl ain pape r) Duplex Monochrome: 1 1.4 pages per minute for A4, Letter (pl ain pape r) Full color: 5.
Technical Specifications 152 Amperage 1 10 to 127 V: 1 1 A or less 220 to 240 V : 7 A or less Acoustic Noise Printing: 52 dB or less S tandby: 35 dB or less External dimensions Height: 349 mm (13.7") Width: 430 mm (16.9") Depth: 395 mm (15.6") Weights Printer: 17.
Technical Specifications 153 Consumable Life Expectancy Chart User-Replaceable Service-Replaceable " The values listed in the above table indicate the number of pages for simplex printing using A4/L etter-size media with 5% coverage.
Our Concern for Environmental Protection 154 Our Concern for Environmental Protection As an ENERGY ST AR ® Partner , we have determined that this machine meets the ENERGY ST AR Guidelines for energ y efficiency .
Index Index 155 A Accessories 136 DIMMs 137 Duplex option 14 3 Hard disk 140 Tray 2 147 Antistatic protection 136 C Configuration menu 27 Consumables Backup battery 86 Drum cartridge 83 Toner cartridg.
Index 156 I Imageable area 58 L Labels 54 Letterhead 55 Loading med ia 59 M Maintenance 92 Media Clearing misfee ds 106 Imageable area 58 Loading 59 Path 106 Preventing misfeeds 105 Media misf eed Dup.
Ein wichtiger Punkt beim Kauf des Geräts Konica Minolta C10P (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Konica Minolta C10P noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Konica Minolta C10P - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Konica Minolta C10P reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Konica Minolta C10P erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Konica Minolta C10P besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Konica Minolta C10P verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Konica Minolta C10P. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Konica Minolta C10P gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
