Benutzeranleitung / Produktwartung bizhub C652 des Produzenten Konica Minolta
Zur Seite of 307
User’ s Guide [Copy Operations].
bizhub C652/C652DS/C552/C552DS/C452 Contents-1 Table of contents 1 Introduction 1.1 Welcome ............. .............. .............. .............. .............. .............. .............. .............. ...... ..... ................ 1-2 1.1.1 User's guides .
bizhub C652/C652DS/C552/C552DS/C452 Contents-2 The [Interrupt] key ...................... .............. .............. .............. .............. .............. .............. .. ............ ...... 4-4 The [Reset] ke y ...... .............. .....
bizhub C652/C652DS/C552/C552DS/C452 Contents-3 5.4.6 Booklet ...................... .............. .............. .............. .............. .............. .............. ......... ..... .............. ....... 5-40 5.4.7 Erase .....................
bizhub C652/C652DS/C552/C552DS/C452 Contents-4 Color Registration Adjust ........... ... .............. .............. .............. .............. .............. .............. .... .......... . 7-20 Gradation Adjustme nt ................ ..........
bizhub C652/C652DS/C552/C552DS/C452 Contents-5 Loading paper into the bypa ss tray ............ .............. .............. ................. .............. .............. ........ ... ... 8-5 Loading paper into the LCT ............... .............
bizhub C652/C652DS/C552/C552DS/C452 Contents-6 Automatic duplex unit ................ .............. .............. .............. .............. ................. .............. ... ..... ....... 12-7 Reverse automatic documen t feeder (bizhub C652/C5 52/C452) .
1 Introduction.
bizhub C652/C652DS/C552/C552DS/C452 1-2 1.1 Welcome 1 1 Introduction 1.1 Welcome Thank you for purchasing this machin e. This User's Guide desc ribes the functions, opera ting instructions, precau tions for correct ope ration, and simple troubleshooting guidelines of this machine.
bizhub C652/C652DS/C552/C552DS/C452 1-3 1.1 Welcome 1 1.1.2 User's Guide This User's Guide is intended for a wide range of us ers ranging from those using this machine for the first time to administrators.
bizhub C652/C652DS/C552/C552DS/C452 1-4 1.2 Conventions used in this manual 1 1.2 Conventions used in this manual 1.2.1 Symbols used in this manual Symbols are used in this manual to express various types of information. The following describes each symbol related to correct and safe usage of this mach ine.
bizhub C652/C652DS/C552/C552DS/C452 1-5 1.2 Conventions used in this manual 1 View the reference as required. Key symbols [ ] This symbol represents a key name on the control panel, touch panel or the computer scre en, p ower switch, etc.
2 Part names and their functions.
bizhub C652/C652DS/C552/C552DS/C452 2-2 2.1 Options 2 2 Part names and their functions 2.1 Options 2.1.1 bizhub C652/C652DS/C552/C552DS No. Name Description 1 Main unit The original is sca nned by the scanner secti on, and the scanned image is printed by the printer section.
bizhub C652/C652DS/C552/C552DS/C452 2-3 2.1 Options 2 6 Keyboard holder KH-101 Mount this kit to use a compact keyboard. For details on compact keyb oards, contact your serv- ice representative. 7 Output Tray OT-503 Collects printed pages. 8 Mount kit MK-715 Used for banner printing.
bizhub C652/C652DS/C552/C552DS/C452 2-4 2.1 Options 2 28 Video interface kit VI-505 Required for in stalling the i mage controller onto this machine. 29 Security Kit SC-507 Allows you to use Copy Guard or Password Copy . This kit is used to prevent unauthorized copying.
bizhub C652/C652DS/C552/C552DS/C452 2-5 2.1 Options 2 2.1.2 bizhub C452 No. Name Description 1 Main unit The original is scanned by the sc anner section, and the scanned image is printed by the printer section. Referred to as the "machine", the "main unit", or the "C452" throughout the manual.
bizhub C652/C652DS/C552/C552DS/C452 2-6 2.1 Options 2 11 Large capacity unit LU-204 Can be loaded with up to 2,500 sheets of 12 e 18-s ize (A3-size) paper. To change the paper size, co ntact your service repre- sentative. Referred to as the LCT throughout th e manual.
bizhub C652/C652DS/C552/C552DS/C452 2-7 2.2 Main Body 2 2.2 Main Body 2.2.1 Outside of th e main body (front) No. Name 1 Control panel 2 Left-side cover release lever 3 Left-side cover 4 Lateral guide 5A D F 6O r i g i n a l t r a y 7 Original output tray 8 Sub power switch 9 USB port ( type A) USB 2.
bizhub C652/C652DS/C552/C552DS/C452 2-8 2.2 Main Body 2 13 Upper right-side door 14 Upper right-side door release lever 15 Bypass tray door 16 Bypass Tray 17 Bypass tray door release lever 18 Lower ri.
bizhub C652/C652DS/C552/C552DS/C452 2-9 2.2 Main Body 2 2.2.2 Outside of th e main body (rear) The illustration above shows the main unit wi th an op tional video interface kit, fax kit, and mount kit.
bizhub C652/C652DS/C552/C552DS/C452 2-10 2.2 Main Body 2 7 Jack for connecting a tele phone (TEL PORT1) 8 Telephone jack 1 (LINE POR T1) 9 USB port ( type A) USB 2. 0/1.1 10 RS-232C port 11 USB port (type B) USB 2.0/1.1 12 Network connector (10Bas e-T/100Base-TX/1000Base-T) 13 Ozone filter No.
bizhub C652/C652DS/C552/C552DS/C452 2-11 2.2 Main Body 2 2.2.3 Main bodyInside bizhub C652/C552/C452 No. Name 1 Original glass 2 Fusing unit 3 Fusing unit cover lever 4 Print head glass cleaning tool .
bizhub C652/C652DS/C552/C552DS/C452 2-12 2.2 Main Body 2 5 Waste toner box 6 Imaging unit 7 Charger-cleaning tool 8 Imaging unit release lever 9 Toner cartridges 10 Slit glass 11 Original scale s 12 Jam removal dial 13 Slit glass cleaner No.
bizhub C652/C652DS/C552/C552DS/C452 2-13 2.2 Main Body 2 bizhub C652DS/C552DS No. Name 1 Original glass 2 Fusing unit 3 Fusing unit cover lever 4 Print head glass cleaning tool 1 8 2 3 4 5 9 7 10 11 1.
bizhub C652/C652DS/C552/C552DS/C452 2-14 2.2 Main Body 2 2.2.4 Control panel 5 Waste toner box 6 Imaging unit 7 Charger-cleaning tool 8 Imaging unit release lever 9 Toner cartridges 10 Slit glass (front) 11 Original scale s 12 Opening and closing guide 13 Slit glass cleaner 14 Slit glass (back) No.
bizhub C652/C652DS/C552/C552DS/C452 2-15 2.2 Main Body 2 Adjusting the angle of the control panel You can adjust the angle of the con trol panel of this machine among three levels. You ca n also tilt the control panel to th e left. Use the con trol panel at an a ngle convenient to u se.
bizhub C652/C652DS/C552/C552DS/C452 2-16 2.2 Main Body 2 2.2.5 Touch panel When the machine has been turn ed on and is ready to begin the copy operation, the basic settings screen appears. To activate a functi on or to select a setting, lightly press the desired butto n appearing in the screen.
bizhub C652/C652DS/C552/C552DS/C452 2-17 2.2 Main Body 2 d Reference To switch the basic settings screen: Press the [Utility/Counter] key ö [User Settings] ö [Custom Display Settings] ö [Copier Settings] ö [Default Tab].
bizhub C652/C652DS/C552/C552DS/C452 2-18 2.3 Option 2 2.3 Option 2.3.1 Finisher FS-526/Saddle st itcher SD-508/Punch kit PK-516 No. Name 1 Output tray 2 2 Output tray 1 3 Front door 1 26 20 19 18 2 3 .
bizhub C652/C652DS/C552/C552DS/C452 2-19 2.3 Option 2 * Press the output tray switch to move fold ed and center staple d paper to the end of th e folding output tr ay.
bizhub C652/C652DS/C552/C552DS/C452 2-20 2.3 Option 2 2.3.2 Job separator JS-602 No. Name 1 Finishing tray 2 Job separator cover 2 1.
bizhub C652/C652DS/C552/C552DS/C452 2-21 2.3 Option 2 2.3.3 Z Folding Unit ZU-606 No. Name 1 Z folding/convey ance unit 2 Guide lever [FN1] 3 Punch scrap box 4 Front door 5 Guide lever [FN6] 6 Guide l.
bizhub C652/C652DS/C552/C552DS/C452 2-22 2.3 Option 2 2.3.4 Post Inserter PI-505 10 Guide lever [FN3] 11 Jam removal dial [FN4] No. Name No. Name 1 Post inserter control panel 2 Lower tray paper guide.
bizhub C652/C652DS/C552/C552DS/C452 2-23 2.3 Option 2 2.3.5 Finisher FS-527/ Sa ddle Stitcher SD-509/ Punc h Kit PK-517/ Job Separator JS-603 1 2 34 6 5 7 8 9 10 11 12 13 14.
bizhub C652/C652DS/C552/C552DS/C452 2-24 2.3 Option 2 No, Name 1 Output tray 2 2 Output tray 1 3 Front door 4 Horizontal transport unit cover 5S t a p l e r 6 Guide lever [FN3] 7 Jam removal dial [FN2.
bizhub C652/C652DS/C552/C552DS/C452 2-25 2.3 Option 2 2.3.6 Job Separator JS-504 13 Jam removal dial [FN6] 14 Recessed pull [FN5] 15 Transport unit 16 Punch kit 17 Job separator 18 Staple cartridge 19 Recessed pull [FN7] 20 Folding output tray No, Name No.
bizhub C652/C652DS/C552/C552DS/C452 2-26 2.3 Option 2 2.3.7 Large capacity unit LU-301/LU-204 No. Name 1 Jam removal cover 2 Upper door 3 Paper take-up roller 4 Paper-empty indicator 5 Release lever 1.
3 Using this machine.
bizhub C652/C652DS/C552/C552DS/C452 3-2 3.1 Turning on or off the machine 3 3 Using this machine 3.1 Turning on or off the machine This machine has two power controls: the [m ain power switch] and [sub power switch]. The [main power switch] turns on or off all functions of the machine .
bizhub C652/C652DS/C552/C552DS/C452 3-3 3.1 Turning on or off the machine 3 4 To turn the power off, press the [sub powe r switch], then the [main power switch]. d Reference To change the default setti ngs for Copy: Press the [Utility/Counter] key ö [User Settings] ö [Copier Settings] ö [Default Copy Settings].
bizhub C652/C652DS/C552/C552DS/C452 3-4 3.2 Basic copy opera tions 3 3.2 Basic copy operations The following procedures describe how to set the original and the basic copy operations. 3.2.1 Placing originals Place the original in the ADF or on the original glass.
bizhub C652/C652DS/C552/C552DS/C452 3-5 3.2 Basic copy opera tions 3 Placing the original on the original glass 0 When placing the ori ginal on the original glass, be su re to lift open the ADF at least 15°.
bizhub C652/C652DS/C552/C552DS/C452 3-6 3.2 Basic copy opera tions 3 % If an original with copy gua rd patterns embedded is scanned, th e copy operation is stopped and the job is discarded. % If an original with a password embedded by the password copy function is scanned, the copy operation starts after you enter the password.
bizhub C652/C652DS/C552/C552DS/C452 3-7 3.2 Basic copy opera tions 3 4 Press [Basic] and then confi gure settings for respective fun ctions. % For details on color se tting, refer to page 5-4. % For details on paper size setting, refer to page 5-5. % For details on magnification setting, refer to page 5-7.
bizhub C652/C652DS/C552/C552DS/C452 3-8 3.2 Basic copy opera tions 3 7 Press [Check Job] ö [Check Details]. % For details on checking job settings, refer to page 5-64.
4 Control Panel Keys.
bizhub C652/C652DS/C552/C552DS/C452 4-2 4 4 Control Panel Keys This section describes the functi ons of the keys on the operation panel. Control panel and functions Press the keys on the operation panel to use th e Copy, Fax/Scan, User Box or other functions.
bizhub C652/C652DS/C552/C552DS/C452 4-3 4 8 [Interrupt] Switches to Interrupt mode. While the machine is in Interrupt mode, the indicato r on the [Interrupt] key lights up in green and the message "Now in Interrupt mode" appears in the touc h panel.
bizhub C652/C652DS/C552/C552DS/C452 4-4 4.1 About the [St art] key, the [Sto p] key, and the [Interrupt] key 4 4.1 About the [Start] key, the [Stop] key, and the [Interrupt] key The [Start] key % Start the copy, scan or fax operation. Press this key again to restart a suspended job.
bizhub C652/C652DS/C552/C552DS/C452 4-5 4.2 About the [Copy] key, th e [Fax/Scan] key, and the [User Box] key 4 4.2 About the [Copy] key, the [Fax/S can] key, and the [User Box] key This machine operate s in Copy, Fax/Scan and User Box modes, from which the user can select a desired function.
bizhub C652/C652DS/C552/C552DS/C452 4-6 4.3 The [Utility/Coun ter] key 4 4.3 The [Utility/Counter] key Press the [Utility/Counter] key to display the Utility screen. You can confi gure the machine settings a nd check its use status in the Utility menu screen.
bizhub C652/C652DS/C552/C552DS/C452 4-7 4.4 The [Mode Memory] key 4 4.4 The [Mode Memory] key Combine frequently use d copy settings into programs an d register them with this mac hine. These programs can easily be recalled as program s. 0 Up to 30 programs can be registered.
bizhub C652/C652DS/C552/C552DS/C452 4-8 4.5 The [Access] key 4 4.5 The [Access] key If the administrator has configured us er authentication settings/account track settings, only the users who have been registered or the users whose accoun ts have been registered can use this machine.
bizhub C652/C652DS/C552/C552DS/C452 4-9 4.5 The [Access] key 4 d Reference To configure us er authentication/acc ount track: Press the [Utility/Counter] key ö [Administrator Settings] ö [User Auth entication/Account Track]. Settings User Authentication Performs the user authenticat ion procedure to use this machine.
bizhub C652/C652DS/C552/C552DS/C452 4-10 4.5 The [Access] key 4 Using the machine during non-scheduled hours The machine can be set to automatically enter Sleep mo de according to a us age sc hedule determined by the administrator so the use of the machi ne can be limited .
bizhub C652/C652DS/C552/C552DS/C452 4-11 4.6 The [Power Save] key 4 4.6 The [Power Save] key If no operation is performed for a specified length of time, the touch panel goes off and the machine automatically enters a mode where it con serves energy .
bizhub C652/C652DS/C552/C552DS/C452 4-12 4.7 The [Accessibility] key 4 4.7 The [Accessibility] key This section describes the procedure s for configuring settings for the control pa nel and adjusting the touch panel.
bizhub C652/C652DS/C552/C552DS/C452 4-13 4.7 The [Accessibility] key 4 Key Repeat Start/Interval Time Specify the length of time until the value begins to change after a touch panel button is held down, and also specify th e length of time for the value to change to the next number.
bizhub C652/C652DS/C552/C552DS/C452 4-14 4.8 The [Enlarge Display] key 4 4.8 The [Enlarge Display] key Press this key to enter Enlarge Display mode and enable ma chine operation using a screen with a layout w ith larger-size characters.
bizhub C652/C652DS/C552/C552DS/C452 4-15 4.9 The [Guidance] key 4 4.9 The [Guidance] key Press this key to view and check descriptions of various functions and operating procedures. When the [Guidance] key is pressed, the Guidance screen for the displa yed screen appears.
bizhub C652/C652DS/C552/C552DS/C452 4-16 4.9 The [Guidance] key 4 Consumables Replace/ Processing Procedure Check procedures for replacing the tone r cartrid ge, imaging unit or waste toner box, adding staples or discardi ng punch-hole scraps by viewing an- imations.
bizhub C652/C652DS/C552/C552DS/C452 4-17 4.10 The [C] (Clear) key 4 4.10 The [C] (Clear) key Clears a value (such as the number of copies, a zoom ratio and siz e) entered using the keypad. % Press the [C] key. The value is deleted. Enter the corre ct value.
bizhub C652/C652DS/C552/C552DS/C452 4-18 4.11 The [Proof Copy] key 4 4.11 The [Proof Copy] key Printing one set to check the copy result (Proof Copy) Print a single proof copy for check ing before printing a large number of copies. This prevents copy errors from occurring.
bizhub C652/C652DS/C552/C552DS/C452 4-19 4.11 The [Proof Copy] key 4 Using a preview image to check th e copy result (Advanced Preview) Check the finishing image of a copy in the touch pane l before printing. This pre vents copy errors from occurring.
bizhub C652/C652DS/C552/C552DS/C4 52 4-20 4.11 The [Proof Copy] key 4 8 Press the [Start] key. Select this menu to start printing. Rotate Image Rotate the preview image 180 degrees in order to correc t the orientation of the original if necessary. Pressing rotates the cu rrently displayed page.
5 Copy Function.
bizhub C652/C652DS/C552/C552DS/C452 5-2 5 5 Copy Function You can configure the settings f or multiple copy features by pressing buttons on the operati on or touch panel. This chapter describes the functions that can be configured by pressi ng the buttons in the touch panel.
bizhub C652/C652DS/C552/C552DS/C452 5-3 5.1 Basic 5 5.1 Basic Configure the basic settings for making copies. Item Color Specify the print color for making copies. p. 5-4 Paper Select the paper type to be printed on and paper tray. p. 5-5 Zoom Select the zoom ratio of the image to be copied.
bizhub C652/C652DS/C552/C552DS/C452 5-4 5.1 Basic 5 5.1.1 Color Select the print color for making copies. For the print color, you can select one from [Auto Color] , [Full Color], [2 Color], [Black] and [Single Color].
bizhub C652/C652DS/C552/C552DS/C452 5-5 5.1 Basic 5 5.1.2 Paper Select the paper type and size to be printed , or to change the paper si ze and paper type settings specified for each paper tray. The paper size can be selected automa tically according to the original si ze or it can be specified manually.
bizhub C652/C652DS/C552/C552DS/C452 5-6 5.1 Basic 5 Configuring a custom size % [Basic] ö [Paper] ö [Bypass Tray] ö [Change Tray Settings] ö [Custom Size]. Configuring wide paper % [Basic] ö [Paper] ö [Bypass Tray] ö [Change Tray Settings] ö [Wide Paper].
bizhub C652/C652DS/C552/C552DS/C452 5-7 5.1 Basic 5 5.1.3 Zoom The original image size in the orig inal can be enlarged or reduced. 0 The auto zoom setting and the auto paper se tting cannot be selected at the same time.
bizhub C652/C652DS/C552/C552DS/C452 5-8 5.1 Basic 5 5.1.4 Duplex/Combine Configure whether to scan one side or both sides of the orig inals and whether to print on one side or both sides of the paper. Multiple (2, 4 or 8) pages of original images can be re duced in size and printed on a single page.
bizhub C652/C652DS/C552/C552DS/C452 5-9 5.1 Basic 5 Binding Position Output Binding Posi- tion Select the output bindin g position from [Left Bind], [Right Bind], [Top] and [Auto]. • If the binding position for the copy is set to [Auto], the binding position is automatically determined according to the orientation of the loaded original.
bizhub C652/C652DS/C552/C552DS/C452 5-10 5.1 Basic 5 5.1.5 Finishing Various settings can be selected for sorting and fin ishing copies fed into the copy output tray.
bizhub C652/C652DS/C552/C552DS/C452 5-11 5.1 Basic 5 Offset Yes/No Spec ify whether to separate each set of copies from anot her set in the output tray when copying multiple se ts of multi-page originals.
bizhub C652/C652DS/C552/C552DS/C452 5-12 5.1 Basic 5 5.1.6 Post Inserter When the Post Inserter PI-505 is install ed on the Finisher FS-526, you can manually operate the Finisher FS-526 using the post inserter control panel. Reference - Only the lower tray can be used as the ou t put tray.
bizhub C652/C652DS/C552/C552DS/C452 5-13 5.1 Basic 5 Finishing using Post Inserter 1 Place paper in the lower tray of the Post Insert er, and align the lateral guide to the paper size. % Set the paper by placing it so that its top side faces the back of the machine.
bizhub C652/C652DS/C552/C552DS/C452 5-14 5.1 Basic 5 3 Press the [Start] key. The original is scanned. 4 Load the next batch of the origin al, and then press the [Start] key. % To change the scanning settings, press [Change Setting]. 5 Repeat Step 4 until all pages of the original are scann ed.
bizhub C652/C652DS/C552/C552DS/C452 5-15 5.2 Origi nal Setting 5 5.2 Original Setting Configure the original status or ori ginal direction for outputting d esired copies. % Press [Original Setting]. Settings Mixed Original Loads originals of different sizes into the ADF and scan them at a time.
bizhub C652/C652DS/C552/C552DS/C452 5-16 5.2 Origi nal Setting 5 Copying mixed originals Loads originals of different sizes into the ADF and scan them a t a time. To copy onto paper of the same size as the original, select [Full Size] in the Zoom tab and select [Auto] on the Paper tab.
bizhub C652/C652DS/C552/C552DS/C452 5-17 5.2 Origi nal Setting 5 Copying Z-folded originals Correctly detects the original si ze when folded originals are loaded into the ADF and copied. The length of the fi rst page of the original is detected, and the subseq uent pages are sc anned as pages of the same size.
bizhub C652/C652DS/C552/C552DS/C452 5-18 5.3 Quality/ Density 5 5.3 Quality/Density Select the setti ng for the image ty pe of the orig inal to better adjust the copy quality/density. % Press [Quality/Density]. Settings Original Type Select the original type (text and image type) to obtain better copy qua lity.
bizhub C652/C652DS/C552/C552DS/C452 5-19 5.3 Quality/ Density 5 Original Type Dot Matrix Original Select this setting to copy origina ls containing only text that appears fai nt (such as that written with a pencil). The copied text is reproduced so that it is darker, making it easier to read.
bizhub C652/C652DS/C552/C552DS/C452 5-20 5.4 Applicat ion 5 5.4 Application Configure the application settings for making copie s. Item Sheet/Cover/Chapter Insert Inserts another sheet of paper or adds a cover page to the paper for copying. You ca n also scan multiple copies of the original with different settings.
bizhub C652/C652DS/C552/C552DS/C452 5-21 5.4 Applicat ion 5 5.4.1 Sheet/Cover/Chapter Insert OHP Interleave Prevent copies printed onto OHP transparencies from st i cking together because of the heat produced during copying by having paper (interleaves) inserted between the transparencies .
bizhub C652/C652DS/C552/C552DS/C452 5-22 5.4 Applicat ion 5 Cover Sheet Copies the front and back cove r sheets onto separate paper when copying an original with a front/back cover sheet. When the original to copy does not have a fron t an d back cover, you can in sert blank sheets of paper as the front and back covers.
bizhub C652/C652DS/C552/C552DS/C452 5-23 5.4 Applicat ion 5 Insert Sheet A different sheet of paper (s uch as colored paper) can be inserted as specified pages in the copies. You can select from two options: [Copy] and [Blank] to enable or disable copying to the inserted sheet.
bizhub C652/C652DS/C552/C552DS/C452 5-24 5.4 Applicat ion 5 d Reference To configure the 2-sided copy mode: Press [Basic] ö [Duplex/Combine]. Insert Image A multi-page original scanned on the original glass ca n be inserted at the pre-set loc ation in an original first scanned with the ADF.
bizhub C652/C652DS/C552/C552DS/C452 5-25 5.4 Applicat ion 5 2 Press [Application] ö [Sheet/Cover/Chapter Insert] ö [Insert Image]. 3 Press the [Start] key.
bizhub C652/C652DS/C552/C552DS/C452 5-26 5.4 Applicat ion 5 Chapters When making 2-sided copies, the page s specified as the first page of a chapter can be printed on the front side of the paper.
bizhub C652/C652DS/C552/C552DS/C452 5-27 5.4 Applicat ion 5 Program Jobs When the originals to be copied include different types of materials such as a 1-si ded original for full size copying and a 2-.
bizhub C652/C652DS/C552/C552DS/C452 5-28 5.4 Applicat ion 5 5 Select the desired copy settings, and then press the [Start] key. % Repeat Steps 3 to 5 un til all originals have been scanned. 6 After all original pages have been scanned, press [Finish].
bizhub C652/C652DS/C552/C552DS/C452 5-29 5.4 Applicat ion 5 5.4.2 Edit Color Neg./Pos. Reverse Use this function to enable the original to be copied wit h the density and gradations of the image inversed. The images in the original are copied and out p ut reversed li ke negative film of photographs.
bizhub C652/C652DS/C552/C552DS/C452 5-30 5.4 Applicat ion 5 Mirror Image Copy originals as mirror images. % Press [Application] ö [Edit Color] ö [Mirror Image]. Settings Original Size Select [Auto] to detect the si ze of the original automatically. If the size of the original is not automaticall y detected, select the original size.
bizhub C652/C652DS/C552/C552DS/C452 5-31 5.4 Applicat ion 5 Background Color Color the blank are a of the original wi th a specified back ground color. % Press [Application] ö [Edit Color] ö [Background Color]. Color Adjustment Adjust the image quality to fit an image based on the color-copied original.
bizhub C652/C652DS/C552/C552DS/C452 5-32 5.4 Applicat ion 5 2 Configure respective functions. % Press [Sample Copy] to see how it will ap pear with the currently specified color quality adjustment settings. Settings Brightness Adjust the brightness of the copied image.
bizhub C652/C652DS/C552/C552DS/C452 5-33 5.4 Applicat ion 5 5.4.3 Book Copy/Repeat Book Copy Divides or does not divide page spre ad s (such as a book or catalog) into left and right pages to copy data. This function enables copying with the ADF open by plac ing the original on the Original Glass.
bizhub C652/C652DS/C552/C552DS/C452 5-34 5.4 Applicat ion 5 Image Repeat An original image can be repeat edly printed on a single sheet of paper. Specify th e original and paper sizes or the zoom to automatically ca lculate the number of im ages to be copied accordingly.
bizhub C652/C652DS/C552/C552DS/C452 5-35 5.4 Applicat ion 5 Poster Mode This function enables enlarged copy of the original im a ge to a size exceeding the paper size that can be loaded in the machine, such as the 34 e 44 (A0) or 24 e 36 (B0) size.
bizhub C652/C652DS/C552/C552DS/C452 5-36 5.4 Applicat ion 5 Booklet Original A catalog with its staples removed can be copie d and bound with staples at the center to create copies of the original catalog. 0 This function is available if a saddle stitch er is installed in the optional finisher.
bizhub C652/C652DS/C552/C552DS/C452 5-37 5.4 Applicat ion 5 % To use the ADF, load the pages with the side that includes the first page on top. 2 Press [Application] ö [Book Copy/Repeat] ö [Boo klet Orig inal]. 3 Press the [Start] key. 4 After all original pages ha ve been scanned, press [Fin ish] and the [Start] key.
bizhub C652/C652DS/C552/C552DS/C452 5-38 5.4 Applicat ion 5 d Reference To set the zoom: Press [Basic] ö [Zoom]. Settings Margin Position Select an option fr om [Auto], [Left], [Top] and [Right]. When Auto is sel ected, the binding position is automatically set.
bizhub C652/C652DS/C552/C552DS/C452 5-39 5.4 Applicat ion 5 5.4.5 Image Adjust If the paper is larger than the original, you can enlarge the original and copy it into the cente r of the paper. Full Size Center Zoom Centering % Press [Application] ö [Image Adjust].
bizhub C652/C652DS/C552/C552DS/C452 5-40 5.4 Applicat ion 5 5.4.6 Booklet The page order of the scanned original is automatical ly arrang ed to produce 2-sided 2 in 1 copies in a page layout for center binding, such as for a magazi ne.
bizhub C652/C652DS/C552/C552DS/C452 5-41 5.4 Applicat ion 5 d Reference To set to an appropriate zoom: Press the [Utility/Counter] key ö [User Settings] ö [Copier Settings] ö [Auto Zoom for Combine/Booklet].
bizhub C652/C652DS/C552/C552DS/C452 5-42 5.4 Applicat ion 5 Non-Image Area Erase This function enables copying with th e ADF open while ha ving an original that cannot be loaded in the ADF placed at a desired position on the original glass. The original is automaticall y detected and th e area outside the original text is erased.
bizhub C652/C652DS/C552/C552DS/C452 5-43 5.4 Applicat ion 5 5.4.8 Stamp/Composition Add date and time, page number , stamp, image, or header or footer to make copies. Item Date/Time Adds date and time to copies. Page Number Adds page numbers or chapter numbers to copie s.
bizhub C652/C652DS/C552/C552DS/C452 5-44 5.4 Applicat ion 5 Date/Time You can select the print positi on and notation format to print the date and time. Sp ecify whether to print on all pages or only on the first page. 0 The date/time stamp cannot be printed on blank page s inserted using the C over Sheet, Insert Sheet and Chapters functions.
bizhub C652/C652DS/C552/C552DS/C452 5-45 5.4 Applicat ion 5 Page Number You can select the print position and notation format to print page numbers and chapter numbers . Page and chapter numbers are printed on all pages. 0 Page numbers cannot be printed on blank page s inserted using the Cover Sheet, Insert Sheet and Chapters functions.
bizhub C652/C652DS/C552/C552DS/C452 5-46 5.4 Applicat ion 5 d Reference To configure the settings for the Cover Shee t, Insert Sheet and Chapters functions: Press [Application] ö [Sheet/Cover/Cha pter Insert]. To configure the settings for the Chapters function: Press [Application] ö [Sheet/Cover/C hapter Insert] ö [Chapters].
bizhub C652/C652DS/C552/C552DS/C452 5-47 5.4 Applicat ion 5 Stamp You can select the print posit ion and notation format to print the stamp. Select printing on all pages or only on the firs t page. 0 A stamp refers to text with printin g con tents fixed and preset.
bizhub C652/C652DS/C552/C552DS/C452 5-48 5.4 Applicat ion 5 Copy Protect This function allows you to print a hidden text for preventing unauthori zed copying, for example, a prese t stamp such as Private or date , in the background withou t particular distinction.
bizhub C652/C652DS/C552/C552DS/C452 5-49 5.4 Applicat ion 5 d Reference To delete a registered stamp: Press the [Utility/Counter] key ö [Administrator Settings] ö [Security Sett ings] ö [Stamp Settings] ö [Delete Regi stered Stamp].
bizhub C652/C652DS/C552/C552DS/C452 5-50 5.4 Applicat ion 5 d Reference To specify and det ect a Copy Guard: Select Utility/Counter ö [Administrator Settings] ö [Security Settings] ö [Security Details] ö [Copy Guard].
bizhub C652/C652DS/C552/C552DS/C452 5-51 5.4 Applicat ion 5 % Select [Application] ö [Stamp/Composition] ö [Copy Securit y] ö [Password Copy]. d Reference To specify and detect a Password Copy: Select [Utility/Counter] ö [Administrator Settings] ö [Securit y Settings] ö [Security Details] ö [Password Copy].
bizhub C652/C652DS/C552/C552DS/C452 5-52 5.4 Applicat ion 5 % Press [Application] ö [Stamp/Composition] ö [Stamp Repeat]. d Reference To delete a registered stamp: Press the [Utility/Counter] key ö [Administrator Settings] ö [Security Sett ings] ö [Stamp Settings] ö [Delete Regi stered Stamp].
bizhub C652/C652DS/C552/C552DS/C452 5-53 5.4 Applicat ion 5 Header/Footer This setting enables printing the date /time and text at the top or the bottom of the paper. The date/time or a distribution number can be printed on each page. The header and footer can contain predetermined contents, but y ou can also te mpo rarily change the conten ts.
bizhub C652/C652DS/C552/C552DS/C452 5-54 5.4 Applicat ion 5 Watermark You can print a watermark (light text) at th e center of th e paper. Select fixed preset text to be printed such as "Invalid Copy" and "Private". Copying with a watermark enables explic it indication of the use of the co pied paper.
bizhub C652/C652DS/C552/C552DS/C452 5-55 5.4 Applicat ion 5 Overlay Makes copies with the image of the fi rst scanned origin al page overlappi ng the subsequent original images.
bizhub C652/C652DS/C552/C552DS/C452 5-56 5.4 Applicat ion 5 Registered Overlay This function enables storin g of an image from the scann ed original as a registered overlay on the hard disk for later use in copying another original. It is us eful to register frequently used overlay images.
bizhub C652/C652DS/C552/C552DS/C452 5-57 5.4 Applicat ion 5 Settings Recall Overlay Image Specify w hethe r to print a registered overlay im age on the front or back side. Press an item to select an overla y image and configures its setting. • You cannot select an overlay image wh en no overlay has been regis- tered.
bizhub C652/C652DS/C552/C552DS/C452 5-58 5.4 Applicat ion 5 d Reference To prohibit changing the overlay registration: Press the [Utility/Counter] key ö [Administrator Settings] ö [System Settings] ö [Restrict User Access] ö [Restrict Access to Job Settings] ö [Change Registered Overly].
bizhub C652/C652DS/C552/C552DS/C452 5-59 5.4 Applicat ion 5 5.4.9 Card Copy Separately scan s the contents of th e front and back sides of a card, fo r example, insurance card, driver's license, or business card, and copie s them together on one sheet.
bizhub C652/C652DS/C552/C552DS/C452 5-60 5.4 Applicat ion 5 5.4.10 Save in User Box This function enables sa ving of data from the scanned or iginal s on the hard disk (in the User Box) built in the machine. Document s saved in User Boxes can be printed when necessa ry.
bizhub C652/C652DS/C552/C552DS/C452 5-61 5.5 Left p anel display 5 5.5 Left panel display In the left panel of the basic settings scree n, you can view the job list and the job status information. You can also view the result of the set tings being configured.
bizhub C652/C652DS/C552/C552DS/C452 5-62 5.5 Left p anel display 5 5.5.1 Job List From the Job List screen, lists of jobs being performed by this mach ine and the jobs that have been performed in addition to the job details can be viewed, and the job settin gs can be changed.
bizhub C652/C652DS/C552/C552DS/C452 5-63 5.5 Left p anel display 5 Current Jobs Lists the jobs currently processed. Check the current status. Delete Deletes a job . Increase Priority (Displayed for the list of print jobs in proc- ess) The currently processed print job is interrupt- ed and printing of the job given priority be- gins.
bizhub C652/C652DS/C552/C552DS/C452 5-64 5.5 Left p anel display 5 5.5.2 Check Job From the Check Job Settings screens, the current co py settings can be checke d and changed if desired. 1 Press [Check Job] ö [Check Details]. 2 Check the copy settings.
6 User Settings.
bizhub C652/C652DS/C552/C552DS/C452 6-2 6 6 User Settings User Settings are for setting items that a user can adjust as appropriate. The contents of th ese setting items depend upon ho w the Administrator settin gs are configure d. User Settings cannot be initialized all at once.
bizhub C652/C652DS/C552/C552DS/C452 6-3 6.1 System Setti ngs 6 6.1 System Settings Configure the basic functions of this machine. % Press the [Utility/Counter] key ö [User Settings] ö [System Settings]. Settings Language Selection Select the language for display in the touch panel.
bizhub C652/C652DS/C552/C552DS/C452 6-4 6.1 System Setti ngs 6 Auto Paper Select for Small Original Specify the paper size to be used for a case wh ere the document placed on the original glass is too small to be detected in Auto Paper mod e. Copy on Small Size Prints on 5-1/2 e 8-1/2 (A5) paper.
bizhub C652/C652DS/C552/C552DS/C452 6-5 6.1 System Setti ngs 6 d Reference To enable Auto Paper: Press [Basic] ö [Paper] ö [Auto Paper]. To enable Auto Color: Press [Basic] ö [Color] ö [Auto Color]. To configure Background Removal to Auto: Press [Quality/Density] ö [Background Removal] ö [Auto].
bizhub C652/C652DS/C552/C552DS/C452 6-6 6.2 Custom Di splay Settings 6 6.2 Custom Display Settings Change the touc h panel display to the c onvenience of the user.
bizhub C652/C652DS/C552/C552DS/C452 6-7 6.2 Custom Di splay Settings 6 Search Option Settings This setting is for the ne twork scan, fax, and net work fax operations. For details, refer to the "User's Guide [Network Scan/Fax/Network Fax Opera- tions]".
bizhub C652/C652DS/C552/C552DS/C452 6-8 6.3 Copi er Settings 6 6.3 Copier Settings Configure the settings use d by the copy functions. % Press the [Utility/Counter] key ö [User Settings] ö [Copier Settings]. Settings Auto Booklet ON when Fold & Staple Configure whether to automatically speci fy Booklet when Center Staple and Fold is selected.
bizhub C652/C652DS/C552/C552DS/C452 6-9 6.3 Copi er Settings 6 Half-Fold/Tri-Fold Specifi- cation Specify whether to apply Half-Fold/Tr i-Fold for all pages together or for specific pages when handling a job containing multiple pages.
bizhub C652/C652DS/C552/C552DS/C452 6-10 6.3 Copi er Settings 6 Print Jobs During Copy Operation Accept Automatic Image Rotation When Auto Paper/Auto Zoom Is Set Finishing Program ON Card Shot Layout: Top/Bottom Zoom: Full Size Store Original Size: X: 3-1/2 inch (89.
bizhub C652/C652DS/C552/C552DS/C452 6-11 6.4 Fax/Scan Settings 6 6.4 Fax/Scan Settings This setting is for the network scan, fax, and network fax operations. For details, refer to the "User's Guid e [Network Scan/Fax/Network Fax Operations]".
bizhub C652/C652DS/C552/C552DS/C452 6-12 6.5 Printer Settings 6 6.5 Printer Settings This setting is for the printer operations. For detail s, refer to the "User's Guide [Print Operations]".
bizhub C652/C652DS/C552/C552DS/C452 6-13 6.6 Change Password 6 6.6 Change Password Change the password for the user who is currently l ogged in. 0 A public user ca nnot use this function. 1 Press the [Utility/Counter] key ö [User Settings] ö [Change Password].
bizhub C652/C652DS/C552/C552DS/C452 6-14 6.7 Change E-Mail Address 6 6.7 Change E-Mail Address Change the E-mail addre sses specified as regist ered user information. 0 When logged in as a registered us er, you can change the E-mail address. 0 Appears when user access is permitted under Admini strator settings.
bizhub C652/C652DS/C552/C552DS/C452 6-15 6.8 Change Icon 6 6.8 Change Icon Change the icon specified as registered user informa tion. 0 When logged in as a registered us er, you can change the E-mail address. 1 Press the [Utility/Counter] key ö [User Settings] ö [Change Icon].
bizhub C652/C652DS/C552/C552DS/C452 6-16 6.9 Register Authentication Information 6 6.9 Register Authentication Information Register or delete the biometric authentication info rmation or IC card authenti cation information about the registered users. You can register or delete authentication informa tion when performing the following operations.
bizhub C652/C652DS/C552/C552DS/C452 6-17 6.9 Register Authentication Information 6 3 Register authentication information. For biometric authentica tion, place your finger on the Authent ication Unit to scan the finger vein pattern. Scan the finger vein pattern three times; reset the same finger each time and the n press [Scan] for each scanning.
bizhub C652/C652DS/C552/C552DS/C452 6-18 6.10 Cellular Phone/PDA Setting 6 6.10 Cellular Phone/PDA Setting Configure settings to print data in a cellular phone or PDA through this machine. For details, refer to the "User's Guide Box Operations" and "User's Guide Print Oper ations".
7 Administrator Settings.
bizhub C652/C652DS/C552/C552DS/C452 7-2 7 7 Administrator Settings Administrator Settings are used only by the administrator to adjust the se ttings. Logging on to Administrator Settings requires the administrator password. Settings System Settings Configure the basic functions of this machine.
bizhub C652/C652DS/C552/C552DS/C452 7-3 7.1 System Setti ngs 7 7.1 System Settings Configure the basic functions of this machine. 7.1.1 Power Save Settings Configure the settings for the power-saving mode. % Press the [Utility/Counter] key ö [Administrator Settings] ö [System Settings] ö [Power Save Settings].
bizhub C652/C652DS/C552/C552DS/C452 7-4 7.1 System Setti ngs 7 7.1.2 Output Settings Configure the settings for the output functions. % Press the [Utility/Counter] key ö [Administrator Settings] ö [System Settings] ö [Output Settings]. Settings Print/Fax Output Setti ngs This setting is for the print and fax operations.
bizhub C652/C652DS/C552/C552DS/C452 7-5 7.1 System Setti ngs 7 7.1.3 Date/Time Settings Configure the current date an d time and the time zone. % Press the [Utility/Counter] key ö [Administrator Settings] ö [System Settings] ö [Date/Time Settings].
bizhub C652/C652DS/C552/C552DS/C452 7-6 7.1 System Setti ngs 7 7.1.4 Daylight Saving Time Configure daylight sa ving time settings. 0 This function is available w hen this machine is connected to the network where UTC (Coordinate Universal Time) is specified.
bizhub C652/C652DS/C552/C552DS/C452 7-7 7.1 System Setti ngs 7 7.1.5 Weekly Timer Setting Configure the weekly timer in order to allow you to turn on an d off this machine at the spe cified date and time. 0 An exact date/time setting must be performed in advance.
bizhub C652/C652DS/C552/C552DS/C452 7-8 7.1 System Setti ngs 7 7.1.6 Restrict User Access Restrict the machine operation, or change or delete the copy progra ms by the user. % Press the [Utility/Counter] key ö [Administrator Settings] ö [System Settings] ö [Restrict User Access].
bizhub C652/C652DS/C552/C552DS/C452 7-9 7.1 System Setti ngs 7 7.1.7 Expert Adjustment Make adjustments so that output quality is increased. % Press the [Utility/Counter] key ö [Administrator Settings] ö [System Settings] ö [Expert Adjustment].
bizhub C652/C652DS/C552/C552DS/C452 7-10 7.1 System Setti ngs 7 Finisher Adjustment Adjust the staple, folding, and punch position of the finisher. This button appears only when the finisher is installed. d Reference Create a sample in advanc e, and then adjust them while checking the sample.
bizhub C652/C652DS/C552/C552DS/C452 7-11 7.1 System Setti ngs 7 Image Stabilization Sett ing Specify the type and opportunity of image stabilization. If [Standard] is se- lected, normal st abilization is per- formed during warm-up processing when a change in the absolute humid- ity has been detected during warm-up processing.
bizhub C652/C652DS/C552/C552DS/C452 7-12 7.1 System Setti ngs 7 User Paper Settings Configure sp ecial pape r settings for User Paper 1 through 6. Settings to configure include Basic Weigh t and Media Adjustment. For details on displaying this item , contact your service representative.
bizhub C652/C652DS/C552/C552DS/C452 7-13 7.1 System Setti ngs 7 Leading Edge Adjustment Adjust the starting print position at the leading edge of each type of paper (with respect to the paper feed direction).
bizhub C652/C652DS/C552/C552DS/C452 7-14 7.1 System Setti ngs 7 4 Check that the distance from the starting print position of the t est pattern to the left edge of th e paper (b) is 3.0 mm ( +/-0.5 mm). % Press [+] or [-] to adjust the width. Press the [Start] key to print a test pattern.
bizhub C652/C652DS/C552/C552DS/C452 7-15 7.1 System Setti ngs 7 d Reference To adjust the half-fold position: Press the [Utility/Counter] key ö [Administrator Settings] ö [System Settings] ö [Expert Adjustment] ö [Finisher Adjustment] ö [Half-Fold Position].
bizhub C652/C652DS/C552/C552DS/C452 7-16 7.1 System Setti ngs 7 Punch Vertical Position Adjustment Adjust the vertical position of th e punched holes for each paper size. 0 Before making any adjustments, cre ate a sample using the punch settings. Adjust the punched hole position while checking th e created sample.
bizhub C652/C652DS/C552/C552DS/C452 7-17 7.1 System Setti ngs 7 Punch Regist Loop Size Adjustment Correct the orientation of the paper and adjust the punche d hole position to be para llel with the left edge of the paper. The punched hole array is corrected by adjusting the re sistance applied to the paper for each paper type.
bizhub C652/C652DS/C552/C552DS/C452 7-18 7.1 System Setti ngs 7 Horizontal Punch (Z-Fold) Position Adjustment Adjust the horizontal position of th e punched holes for each paper size. 0 Before making any adjustments, cre ate a sample using the punch settings.
bizhub C652/C652DS/C552/C552DS/C452 7-19 7.1 System Setti ngs 7 2nd Z-Fold Position Adjustment Adjust the second paper folding position for each paper size wh en using the Z-fold fu nction. 0 Before making any adjustments, cre ate a sample using the Z-fold function.
bizhub C652/C652DS/C552/C552DS/C452 7-20 7.1 System Setti ngs 7 Color Registration Adjust If color shifts are detected in the print result, adju st t he each color print posi tion for each paper type. 0 The procedure for adjusting the colo r registration is the same for yellow, magenta and cyan.
bizhub C652/C652DS/C552/C552DS/C452 7-21 7.1 System Setti ngs 7 Gradation Adjustment Adjust irregular gradation levels of print images. 0 Adjust each correction item three times. 1 Turn off the main power switch of this machine. 2 Wait at least 10 seconds, and then turn it on again.
bizhub C652/C652DS/C552/C552DS/C452 7-22 7.1 System Setti ngs 7 7.1.8 List/Counter Configure the job settings list print settings and paper count settings for this machine. % Press the [Utility/Counter] key ö [Administrator Settings] ö [System Settings] ö [List/Counter].
bizhub C652/C652DS/C552/C552DS/C452 7-23 7.1 System Setti ngs 7 7.1.9 Reset Settings Configure auto reset settings. 0 All settings performed in the follow ing tabs during operation using th e copy function are automatically reset to the initial settings afte r the specified time has elapsed.
bizhub C652/C652DS/C552/C552DS/C452 7-24 7.1 System Setti ngs 7 d Reference To configure us er authentication/acc ount track: Press the [Utility/Counter] key ö [Administrator Settings] ö [User Authentication/Account Track] ö [General Settings]. 7.1.
bizhub C652/C652DS/C552/C552DS/C452 7-25 7.1 System Setti ngs 7 7.1.12 Stamp Settings Configure header and footer settings to be printed. % Press the [Utility/Counter] key ö [Administrator Settings] ö [System Settings] ö [Stamp Settings].
bizhub C652/C652DS/C552/C552DS/C452 7-26 7.1 System Setti ngs 7 7.1.13 Blank Page Print Settings Configure whether to print sta mps or overlay on blank pages. % Press the [Utility/Counter] key ö [Administrator Settings] ö [System Settings] ö [Blank Page Print Settings].
bizhub C652/C652DS/C552/C552DS/C452 7-27 7.1 System Setti ngs 7 7.1.15 Default Bypass Paper Type Setting Configure the initial settings for the pa per type to be used for the bypass tr ay. The initial setting for the paper type is applied after the job finishes or the tray runs out of paper.
bizhub C652/C652DS/C552/C552DS/C452 7-28 7.1 System Setti ngs 7 7.1.17 Page Number Print Position Specify a page number print position when printing page numbers after co nfiguring 2-sided print or booklet settings.
bizhub C652/C652DS/C552/C552DS/C452 7-29 7.2 Administrator/Machine Settings 7 7.2 Administrator/Machine Settings Register administrator information and E-mail address of this machine. 0 The device name entere d under the Input Ma chine Address may not be supported by your operating system.
bizhub C652/C652DS/C552/C552DS/C452 7-30 7.3 One-Touch/User Box Registration 7 7.3 One-Touch/User Box Registration This setting is for the User Box, netw ork scan, fax, and network fax operations. For detail s, refer to the "User's Guide [Network Scan/Fax/Network Fax Operations]" and "User's Guide [Box Operations]".
bizhub C652/C652DS/C552/C552DS/C452 7-31 7.4 User Authentication/Account Track 7 7.4 User Authentication/Account Track Configure the authentication set tings to control the use of this machine. Type and functions of authentication - User Authentication Appropriate for controlling users.
bizhub C652/C652DS/C552/C552DS/C452 7-32 7.4 User Authentication/Account Track 7 7.4.1 General Settings Configure the settings for enabling the authentication function s.
bizhub C652/C652DS/C552/C552DS/C452 7-33 7.4 User Authentication/Account Track 7 d Reference To configure external server settings: Press the [Utility/Counter] key ö [Administrator Settings] ö [User Authentica tion/Account Track] ö [Ex ternal Server Settings].
bizhub C652/C652DS/C552/C552DS/C452 7-34 7.4 User Authentication/Account Track 7 7.4.2 User Authen tication Settings Configure the user and user counter management setti ngs. 0 When only user authentic ation settings are configured, User Authentica tion Setting are enabled.
bizhub C652/C652DS/C552/C552DS/C452 7-35 7.4 User Authentication/Account Track 7 Account Name Specify the account track of the registe red user when account track settings are con figured, Before you select an account name, you must registered it. Output Permission Apply the following restrictions to the selected user or all users.
bizhub C652/C652DS/C552/C552DS/C452 7-36 7.4 User Authentication/Account Track 7 d Reference To specify the maximu m number o f registrations for the user: Press the [Utility/Counter] key ö [Administrator Settings] ö [User Authentication/Account Track] ö [General Settings] ö [Number of User Counters Assigned].
bizhub C652/C652DS/C552/C552DS/C452 7-37 7.4 User Authentication/Account Track 7 7.4.3 Account Track Settings Configure the ac count and accoun t counter managem ent settings. 0 When only account trac k settings are configured, Account Tra ck Settings is enabled.
bizhub C652/C652DS/C552/C552DS/C452 7-38 7.4 User Authentication/Account Track 7 d Reference To specify the maximu m number o f registrations for the ac count: Press the [Utility/Counter] key ö [Administrator Settings] ö [User Authentication/Account Track] ö [General Settings] ö [Number of User Counters Assigned].
bizhub C652/C652DS/C552/C552DS/C452 7-39 7.4 User Authentication/Account Track 7 7.4.6 External Server Settings Configure the exte rnal server that performs user authentica tion. % Press the [Utility/Counter] key ö [Administrator Settings] ö [User Authenticati on/Account Track] ö [External Server Settings].
bizhub C652/C652DS/C552/C552DS/C452 7-40 7.4 User Authentication/Account Track 7 7.4.8 Authentication Device Settings Configure the authentica tion operations when th e optional authentication unit is installed. 0 This setting is available when the optional authentication unit is installed.
bizhub C652/C652DS/C552/C552DS/C452 7-41 7.4 User Authentication/Account Track 7 7.4.9 User/Account Common Setting Configure the settings for the logout co nfirmation screen and settings fo r single color and 2 color output management if authent ication settings have been configured.
bizhub C652/C652DS/C552/C552DS/C452 7-42 7.5 Network Settings 7 7.5 Network Settings This setting is for the network operations. For details, refer to the "User's Guid e [Network Administrator]".
bizhub C652/C652DS/C552/C552DS/C452 7-43 7.6 Copi er Settings 7 7.6 Copier Settings Configure the settings use d by the copy functions. % Press the [Utility/Counter] key ö [Administrator Settings] ö [Copier Settings].
bizhub C652/C652DS/C552/C552DS/C452 7-44 7.6 Copi er Settings 7 Specify Default Tray when APS Off Tray Before APS ON Select Tray for Insert Sheet Tray 2 Print Jobs During Copy Operation Accept Tri-Fol.
bizhub C652/C652DS/C552/C552DS/C452 7-45 7.7 Printer Settings 7 7.7 Printer Settings This setting is for the print operations. For details , refer to the "User's Guide [Print Operations]".
bizhub C652/C652DS/C552/C552DS/C452 7-46 7.8 Fax Setting s 7 7.8 Fax Settings This setting is for the fax and network fax operati o ns. For d etails, refer to the "User's Guide [Network Scan/Fax/Network Fax Operati ons]".
bizhub C652/C652DS/C552/C552DS/C452 7-47 7.9 System Con nection 7 7.9 System Connection Configure settings for software, cellular phone, or PDA that can be accessed with this machine.
bizhub C652/C652DS/C552/C552DS/C452 7-48 7.9 System Con nection 7 Printer Information Specify [Printer Name], [Printer Location], [Printer I nformation], and [Printer URI]. The [Printer Information] setting i s linked to [Printer Information] in [HTTP Serv- er Settings].
bizhub C652/C652DS/C552/C552DS/C452 7-49 7.10 Security Settings 7 7.10 Security Settings Configure the settings for the restricting the functi ons of this machine for processing secret data. 7.10.1 Administrat or Password Change the administrator password.
bizhub C652/C652DS/C552/C552DS/C452 7-50 7.10 Security Settings 7 7.10.3 Administrator Security Levels Configure settings so that the user can change some of the settings accessible only to the administrator. Settings allowed to the user appear in User Settings.
bizhub C652/C652DS/C552/C552DS/C452 7-51 7.10 Security Settings 7 7.10.4 Security Details Configure security detail settings to restrict the fun ctions of this machine. You can restrict the funct ions to enhance security. % Press the [Utility/Counter] key ö [Administrator Settings] ö [Security Settings] ö [Security Details].
bizhub C652/C652DS/C552/C552DS/C452 7-52 7.10 Security Settings 7 Confidential Document Ac- cess Method Synchronizes with the settings for "Prohibited Functions When Authentica- tion Error", automatically changes it. •M o d e 1 Requires entering security document ID and password before selecting a security document from a User Box.
bizhub C652/C652DS/C552/C552DS/C452 7-53 7.10 Security Settings 7 Copy Guard No Password Copy No Factory default.
bizhub C652/C652DS/C552/C552DS/C452 7-54 7.10 Security Settings 7 7.10.5 Enhanced Security Mode The enhanced security mode cann ot be enabled when any of the current functional sett ings conflict with the enhanced security mode.
bizhub C652/C652DS/C552/C552DS/C452 7-55 7.10 Security Settings 7 If [Enhanced Secu rity settings] is en abled, various security functions are con figured to allow you to ensure the higher-level securit y of data ma nagement. For details, contact your service representative.
bizhub C652/C652DS/C552/C552DS/C452 7-56 7.10 Security Settings 7 7.10.7 Function Management Settings Configure the settings for the network f unctions that are difficult to count. % Press the [Utility/Counter] key ö [Administrator Settings] ö [Security Settings] ö [Function Management Settings] .
bizhub C652/C652DS/C552/C552DS/C452 7-57 7.10 Security Settings 7 7.10.8 Stamp Settings Manage the stamp. % Press the [Utility/Counter] key ö [Administrator Settings] ö [Security Settings] ö [Stamp Settings]. d Reference To configure copy protect and stamp repeat settings: Press [Application] ö [Stamp/Composition].
bizhub C652/C652DS/C552/C552DS/C452 7-58 7.11 License Settings 7 7.11 License Settings Enable the functions of an optional compon ent i-Option LK-101, LK-102, LK-103 or LK-10 5. For details on the enabling procedure, refer to the "Quick Guide [Copy/Print/Fa x/Scan/Box Operations]".
bizhub C652/C652DS/C552/C552DS/C452 7-59 7.12 OpenAPI Authenticatio n Management Settings 7 7.12 OpenAPI Authentication Management Settings Configure settings to prevent our de precated OpenAPI connection applicatio n from being registered in this machine.
8 Maintenance.
bizhub C652/C652DS/C552/C552DS/C452 8-2 8.1 Paper 8 8 Maintenance 8.1 Paper 8.1.1 Checking the paper Replenishment message If a tray has run out of paper during printing, load pa per or change the paper tray . Load paper in the paper tray that is highlighted in color.
bizhub C652/C652DS/C552/C552DS/C452 8-3 8.1 Paper 8 8.1.2 Loading paper This section describes how to load paper into each tr ay. If printing stops due to the tray being empty, load paper into the tray. Printi ng re starts automatically. For the types of paper to be used, refer to page 12-2.
bizhub C652/C652DS/C552/C552DS/C452 8-4 8.1 Paper 8 Loading paper into trays 3 and 4 The same procedures can be used to load paper into trays 3 and 4. The following procedure describes how to load paper into tray 3. 1 Pull out tray 3. NOTICE Be careful not to touch the surfa ce of the paper take-up roller with your hand .
bizhub C652/C652DS/C552/C552DS/C452 8-5 8.1 Paper 8 Loading paper into the bypass tray 1 Open the bypass tray. % To load large-sized paper, pull out the tr ay extension . NOTICE Be careful not to touch the surfa ce of the paper take-up roller with your hand .
bizhub C652/C652DS/C552/C552DS/C452 8-6 8.1 Paper 8 % To load label sheet s: Load them in t he w orientation, as shown in the illustration. A label sheet consists of the pri nting surface, sticking layer, and pasteboard. Peel off the pa steb oard, then you ca n stick the label to other objects.
bizhub C652/C652DS/C552/C552DS/C452 8-7 8.1 Paper 8 Loading paper into the LCT The same procedures can be used to load paper into the Large capacity unit LU-301 and LU-204. The following procedure describes how to load paper in to La rge capacity unit LU-3 01.
bizhub C652/C652DS/C552/C552DS/C452 8-8 8.2 Consumables 8 8.2 Consumables 8.2.1 Checking comsumables Replacement message When it is time to replace th e Toner Cartridge or Imaging Unit, an adva nced warning message appears at the top of the screen.
bizhub C652/C652DS/C552/C552DS/C452 8-9 8.2 Consumables 8 Imaging Unit NOTICE Do not replace the Imaging Unit until a "Please replace following unit(s)." message appears. If you continue to use the drum unit wh ile an ad vanced warning message is displayed, the following replacement message appears.
bizhub C652/C652DS/C552/C552DS/C452 8-10 8.2 Consumables 8 Checking consumables status In the Check Consumable Life screen, you can ch eck the status (usage level) of consumables. 1 Press the [Utility/Counter] key. 2 Press [Check Consumable Life]. % To print the list of usage levels, press [Pri nt List], then [S tart] or the [Start] key.
bizhub C652/C652DS/C552/C552DS/C452 8-11 8.2 Consumables 8 % To display the Coverage Rate screen , press [Coverage Rate]. Checking the total nu mber of pages printed Pressing Total Counter displays the total number of pages printed to date.
bizhub C652/C652DS/C552/C552DS/C452 8-12 8.3 Cleaning procedure 8 8.3 Cleaning procedure Slit glass (bizhub C652/C552/C452) NOTICE Do not touch the slit glass. 1 Open the ADF, and then remove the slit glass clea ner. 2 Wipe stains off the slit gla ss using the slit glass cleaner.
bizhub C652/C652DS/C552/C552DS/C452 8-13 8.3 Cleaning procedure 8 Slit glass (back) (bizhub C652DS/C552DS) NOTICE Do not touch the slit glass (back). 1 Open the ADF, and then remove the slit glass clea ner. 2 Open the opening and closing guide. 3 Wipe stains off the slit glass us ing the slit glass (back) clean er.
bizhub C652/C652DS/C552/C552DS/C452 8-14 8.3 Cleaning procedure 8 Housing, document pad NOTICE Never use solven ts, such as benz ene or thinner, to clean the docume nt pad. % Wipe the surface us ing a soft cloth mois tened with a mild household detergent.
9 Troubleshooting.
bizhub C652/C652DS/C552/C552DS/C452 9-2 9.1 When the message "Trouble" appears (call a service representative) 9 9 Troubleshooting This chapter describes troubleshooting. 9.1 When the message "Trouble" appears (call a service representative) If this message appears, perform the operation descri bed in the message.
bizhub C652/C652DS/C552/C552DS/C452 9-3 9.1 When the message "Trouble" appears (call a service representative) 9 4 Unplug the machine. 5 Contact your service representa tive and inform them of the written down malfunct ion code.
bizhub C652/C652DS/C552/C552DS/C452 9-4 9.2 Troubles hooting table 9 9.2 Troubleshooting table Simple troubleshooting The following explains simple troubleshooting procedures. If the problem is not co rrected after the described operation is performed, contact your service representative.
bizhub C652/C652DS/C552/C552DS/C452 9-5 9.2 Troubles hooting table 9 The image is printed at an angle Is the original pos itioned correct- ly? Correctly position the original against the docume nt scales. (p. 3-5) Load the original into the ADF, and slide the adjustable lateral guides to fit the size of the origi- nal.
bizhub C652/C652DS/C552/C552DS/C452 9-6 9.2 Troubles hooting table 9 The staple is incorrectly posi- tioned by 90° Has the staple p osition been cor- rectly specified? Specify the desired position for stapling.
bizhub C652/C652DS/C552/C552DS/C452 9-7 9.2 Troubles hooting table 9 Scanning doe s not start Have you placed your finger cor- rectly on the authentication uni t? Confirm how to perform authen- tication and how to place your finger when scanning.
bizhub C652/C652DS/C552/C552DS/C452 9-8 9.2 Troubles hooting table 9 Main messages and their remedies If any message other than those lis ted below appears, perform the op eration described in the message. Message Cau se Remedy Originals left on original glass.
bizhub C652/C652DS/C552/C552DS/C452 9-9 9.2 Troubles hooting table 9 Replenish paper. The indica ted tray has run out of paper. Add paper. (p. 8-3) Toner (X) is low. Please when in- dicate. The toner for the indicated color is about to run out. Prepare to replace the toner car- tridge following the guidance contained in your mainten ance agreement.
bizhub C652/C652DS/C552/C552DS/C452 9-10 9.2 Troubles hooting table 9 Icons that appear in the touch-panel screen Now Downloading Program Data from the Firmware server. (1) CS Remote Ca re was activat- ed by your service representa- tive. (2) Internet ISW is being down- loaded.
bizhub C652/C652DS/C552/C552DS/C452 9-11 9.2 Troubles hooting table 9 Indicates tha t "Enhanced Secu rity Mode" is set to "ON". Appears when th e external m emory (USB memory) is not connected. Indicates that a nonstan dard external memory has been connected to this machine, therefore, USB connection is not enabled.
bizhub C652/C652DS/C552/C552DS/C452 9-12 9.3 If print quality is deterior ated 9 9.3 If print quality is deteriorated Cleaning the electrostatic charger wire If the electrostati c charger wire is dirty, streaks will appear though the printed images. If this occurs, follow the procedure described below to cl ean the electrostatic charger wire.
bizhub C652/C652DS/C552/C552DS/C452 9-13 9.3 If print quality is deterior ated 9 Cleaning the print head If the print head becomes dirty, print q uality may be re duced. If this occurs, clean the print head according to the following procedure. 1 Pull out tray 1.
bizhub C652/C652DS/C552/C552DS/C452 9-14 9.3 If print quality is deterior ated 9 5 Insert the print head glass cleaning tool into the print head cleaning opening, pu ll it out, and then repea t this back-and-forth movement two or three times. 6 Install the waste toner box.
10 Authentication unit (biometric type).
bizhub C652/C652DS/C552/C552DS/C452 10-2 10.1 Using an authentication unit (biom etric type) 10 10 Authentication unit (biometric type) This chapter describes the authen tication unit (biometric type). 1. Authenti cation unit (biometric type) AU-101 2.
bizhub C652/C652DS/C552/C552DS/C452 10-3 10.1 Using an authentication unit (biom etric type) 10 To use the authentication unit, first register the finger vein pattern of the user in this machine. The registered user, who is authenticated with t he finger vein pattern, can log in to this machine or execute a print job.
bizhub C652/C652DS/C552/C552DS/C452 10-4 10.1 Using an authentication unit (biom etric type) 10 7 Configure "Beep Sound" and "Oper ation Settings". % For "Beep Sound", s pecify whether to give a "blip" sound when the finger vein p attern is scanned successfully.
bizhub C652/C652DS/C552/C552DS/C452 10-5 10.1 Using an authentication unit (biom etric type) 10 10.1.2 Registering a user The following two methods can be used to register a user.
bizhub C652/C652DS/C552/C552DS/C452 10-6 10.1 Using an authentication unit (biom etric type) 10 5 Press [Edit]. 6 Place your finger on the authentication unit to scan the finger vein pattern. % Scan the finger vein pattern three times; reset th e same fi nger each time and then press [Scan] for each scanning.
bizhub C652/C652DS/C552/C552DS/C452 10-7 10.1 Using an authentication unit (biom etric type) 10 Checking the version of the installed Da ta Administrator 1 From the "Help" menu of Data Administ rator, select "Ver sion Information".
bizhub C652/C652DS/C552/C552DS/C452 10-8 10.1 Using an authentication unit (biom etric type) 10 5 Click the "Browse my computer fo r driver software (advanced)". 6 Check that the driver's search location is the application CD-ROM, and then click the [Next].
bizhub C652/C652DS/C552/C552DS/C452 10-9 10.1 Using an authentication unit (biom etric type) 10 % Installation starts. 7 Click the [Close]. Installation of BioDriver (USB-Drive r) is completed. 8 Install Data Administrator Bio Plugin. Open the DA_Bio_Plugin fold er on the application CD-ROM, and then cl ick setup.
bizhub C652/C652DS/C552/C552DS/C4 52 10-10 10.1 Using an authentication unit (biom etric type) 10 11 Click the [Next]. 12 Select "I accept th e terms in the lice nse agreement", and then click the [Next].
bizhub C652/C652DS/C552/C552DS/C4 52 10-11 10.1 Using an authentication unit (biom etric type) 10 14 Click the [Finish]. Installation of the Data Admi nistrator Bio Plugin is complet ed, which completes the setup.
bizhub C652/C652DS/C552/C552DS/C4 52 10-12 10.1 Using an authentication unit (biom etric type) 10 4 Data Administrator starts, and device in formation of this machine is imported. The Device Information window appears. % For details on how to import de vice information, refer to t he Data Administrator User's Guide.
bizhub C652/C652DS/C552/C552DS/C4 52 10-13 10.1 Using an authentication unit (biom etric type) 10 6 Select the desired template, and then click the [OK]. The User Registration window appears. 7 Enter the user name and password, select the "AU-1 01" or "AU-102" tab, an d then click the [Register Auth.
bizhub C652/C652DS/C552/C552DS/C4 52 10-14 10.1 Using an authentication unit (biom etric type) 10 8 Register finger vein pattern. % Scan the finger vein patterns th re e times; reset the same finger an d then press [Start Reading] for each scanning. % After scanning the f inger vein patterns, place the same finger, and click [Authenticati on Test].
bizhub C652/C652DS/C552/C552DS/C4 52 10-15 10.1 Using an authentication unit (biom etric type) 10 10 Click the [OK]. % Repeat steps 5 to 10 to register all users. 11 Click the [Export to the device]. % Select the user name and cli ck the [Edit] to change the registered data.
bizhub C652/C652DS/C552/C552DS/C4 52 10-16 10.1 Using an authentication unit (biom etric type) 10 12 Click the [Write]. % Data Administrator provides the batch copy function that batch-configures the registered user da ta in multiple machines with the authentication unit enabled.
bizhub C652/C652DS/C552/C552DS/C4 52 10-17 10.1 Using an authentication unit (biom etric type) 10 10.1.3 Logging in to this machine This section explains how to log in to this mach ine with the finger vein pattern authentication. - To use authentication unit (bi ometric type), register the finger vein pat tern in advance.
bizhub C652/C652DS/C552/C552DS/C4 52 10-18 10.1 Using an authentication unit (biom etric type) 10 When 1-to-1 authenticat ion has been specified 1 Select [User Name], an d enter the user name. 2 Place your finger on the authentication unit. The basic settings screen appears.
11 Authentication unit (IC card type).
bizhub C652/C652DS/C552/C552DS/C452 11-2 11.1 Using authentication unit (IC card type) 11 11 Authentication unit (IC card type) This chapter describes the auth entication unit (IC card type).
bizhub C652/C652DS/C552/C552DS/C452 11-3 11.1 Using authentication unit (IC card type) 11 2 Set [User Authentication] to "O N (MFP)", and then press [OK]. 3 Press [Yes] , and then [OK]. 4 Press [8 Authenticati on Device Settings]. 5 Press [1 General Settings].
bizhub C652/C652DS/C552/C552DS/C452 11-4 11.1 Using authentication unit (IC card type) 11 8 Press [OK] twice. 9 Press [2 Logoff Settings]. 10 Specify whether to log out the user when scanning the original has finished afte r the user logged in with the authentication unit.
bizhub C652/C652DS/C552/C552DS/C452 11-5 11.1 Using authentication unit (IC card type) 11 4 Press [Register Auth. Info.]. 5 Press [Edit]. 6 Place the IC card on the authentication unit, and press [OK]. 7 When message [Registration comple te] appears, pre ss [Close] twice.
bizhub C652/C652DS/C552/C552DS/C452 11-6 11.1 Using authentication unit (IC card type) 11 Registering a user usin g Data Administrator To use Data Administrator, configure this mach ine, and set up Data Administrator. For setup, install the IC Card Driver (USB-Driver) of the authentica tion unit, and then install Data Administrator IC Card Plugin.
bizhub C652/C652DS/C552/C552DS/C452 11-7 11.1 Using authentication unit (IC card type) 11 Setup 1 Turn the main power of th is machine off, a nd disconnect the auth entication unit from th is machine. 2 Install IC Card Driver (USB-Driver). Connect the authentication unit to the USB port of your computer.
bizhub C652/C652DS/C552/C552DS/C452 11-8 11.1 Using authentication unit (IC card type) 11 6 Check that the driver's search location is the application CD-ROM, and then click the [Next]. % When the driver's search location is not the application CD-ROM, click the [Browse].
bizhub C652/C652DS/C552/C552DS/C452 11-9 11.1 Using authentication unit (IC card type) 11 7 Click the [Close]. Installation of the IC Card Driv er (USB-Driver) is completed. 8 Install Data Administ rator IC Card Plugin. Open the IC_Card_Plugin folder on the applicati on CD-ROM, and then click setup.
bizhub C652/C652DS/C552/C552DS/C4 52 11-10 11.1 Using authentication unit (IC card type) 11 12 Select "I accept th e terms in the lice nse agreement", and then click the [Next]. 13 Click the [Install]. 14 Click the [Finish]. Installation of the Data Administrator IC Card Plugin is completed, which complet es the setup.
bizhub C652/C652DS/C552/C552DS/C4 52 11-11 11.1 Using authentication unit (IC card type) 11 User registration To register a user with Data Administ rator, connect the authenticati on unit to the USB port of t he computer, and also connect the computer to this machine via network.
bizhub C652/C652DS/C552/C552DS/C4 52 11-12 11.1 Using authentication unit (IC card type) 11 5 In Select Function, select "Authentication Se tti ngs" - "User Setting", and then click the [Add]. 6 Select the desired template, and then click the [OK].
bizhub C652/C652DS/C552/C552DS/C4 52 11-13 11.1 Using authentication unit (IC card type) 11 7 Enter the user name and password, and select the "IC card authentication" tab. % Enter the E-mail address and other information as required. 8 Place the IC card on the authentication unit, and cli ck the [Start reading].
bizhub C652/C652DS/C552/C552DS/C4 52 11-14 11.1 Using authentication unit (IC card type) 11 10 Click [Export to the device]. % Select the user name and cli ck the [Edit] to change the registered data.
bizhub C652/C652DS/C552/C552DS/C4 52 11-15 11.1 Using authentication unit (IC card type) 11 NOTICE To turn the main power switch off and on, first turn the main power switch off, and t hen turn it on after 10 or more seconds has elapsed. Not doing so may result in an operation failure.
bizhub C652/C652DS/C552/C552DS/C4 52 11-16 11.1 Using authentication unit (IC card type) 11 When IC card authentication + pa ssword authentication is enabled 1 Place the IC card on the working table. 2 Press [Pass word], and then enter the password. 3 Press either [ Login] or the [Access] key.
12 Specifications.
bizhub C652/C652DS/C552/C552DS/C452 12-2 12.1 Paper 12 12 Specifications This chapter describes the specific ations of the paper, machine, and options.
bizhub C652/C652DS/C552/C552DS/C452 12-3 12.1 Paper 12 NOTICE Paper other than plain paper, such as OHP transparencies and colored paper, is called special paper. Be sure to select a special paper setting for paper trays loaded with media such as OHP transpare ncies and colored paper.
bizhub C652/C652DS/C552/C552DS/C452 12-4 12.2 Machine specifications 12 12.2 Machine specifications bizhub C652/C652 DS/C552/C552DS/C452 Specification Type Scanner, printer, de sktop, or stand-alone D.
bizhub C652/C652DS/C552/C552DS/C452 12-5 12.2 Machine specifications 12 Number of loadable sheets (8-1/2 e 11 (A4)) Tray 1 or 2 Plain paper: 500 she ets (21-1/4 lb (80 g/m 2 ))/550 sheets (17 lb (64 g.
bizhub C652/C652DS/C552/C552DS/C452 12-6 12.2 Machine specifications 12 Copy speed (When 8-1/2 e 11 (A4) printing) Full Color (Simplex/D uplex) C652/C652DS Plain paper: 50 sheets/mi n., Thick1 or 1+: 32 sheets/min., Thick2, 3 or 4, Special paper, Glossy mode: 25 sheets/min.
bizhub C652/C652DS/C552/C552DS/C452 12-7 12.2 Machine specifications 12 Automatic duplex unit Reverse automatic documen t feeder (bizhub C652/C552/C452) Reverse automatic documen t feeder (bizhub C652.
bizhub C652/C652DS/C552/C552DS/C452 12-8 12.3 Options 12 12.3 Options Large capacity unit LU-301 Large capacity unit LU-204 * The maximum number of loadable sh eets for each paper size is 2,5 00 sheets (for 21-1/4 lb (80 g/m 2 )) or 2,750 sheets (for 17 lb (64 g/m 2 )).
bizhub C652/C652DS/C552/C552DS/C452 12-9 12.3 Options 12 Finisher FS-526 Specification Output tray Output tray 1, output tray 2 Feeding function Group, Sort, Offset Group * , Offset Sort * , Staple * .
bizhub C652/C652DS/C552/C552DS/C4 52 12-10 12.3 Options 12 Saddle stitcher SD-508 Staple 11 e 17 w , A3 w 2 sheets-9 sheets 50 sets 10 sheets-20 sheets 50 sets 21 sheets-30 sheets 30 sets 31 sheets-40.
bizhub C652/C652DS/C552/C552DS/C4 52 12-11 12.3 Options 12 * Not applicable to multi-function jobs (jobs with multiple functions combined). Punch kit PK-516 Paper size Center Staple and Fold, Half-Fol.
bizhub C652/C652DS/C552/C552DS/C4 52 12-12 12.3 Options 12 Job Separator JS-602 Z-Folding Unit ZU-606 Paper size "2-Hole" Punch setting : 11 e 17 w to 5-1/2 e 8-1/2 w , A3 w to A5 w / v , 8 .
bizhub C652/C652DS/C552/C552DS/C4 52 12-13 12.3 Options 12 Post Inserter PI-505 Finisher FS-527 Specification Configuration 2 trays (upper and lower) Cover paper type Plain paper 17 lb to 23-15/16 lb .
bizhub C652/C652DS/C552/C552DS/C4 52 12-14 12.3 Options 12 Saddle stitcher SD-509 Paper loading capacity < Output tray 1> Plain paper (15-15/1 6 lb to 23-15/16 lb (60 g/m 2 to 90 g/m 2 )) 200 sh.
bizhub C652/C652DS/C552/C552DS/C4 52 12-15 12.3 Options 12 Punch Kit PK-517 Job Separator JS-504 Paper type Plain paper (15-15/16 lb to 23-15/16 lb (60 g/m 2 t o 9 0 g / m 2 )) Thick 24-3/16 lb to 55-.
bizhub C652/C652DS/C552/C552DS/C4 52 12-16 12.3 Options 12 Job Separator JS-603 Authentication unit (biometric type) AU-101 Paper loading capacity <Output tray 1> Plain paper (1 5-15/16 lb to 23.
bizhub C652/C652DS/C552/C552DS/C4 52 12-17 12.3 Options 12 Authentication unit (biometric type) AU-102 Authentication unit (IC card type) AU-201 Compatible computer CPU PC/AT compatible, 1 GHz or more.
bizhub C652/C652DS/C552/C552DS/C4 52 12-18 12.3 Options 12 System conditions (during operation) Ambient temperature 32 ºF to 104 ºF (0 ºC to 40 ºC) Humidity 20% to 85% (No dew condensation) System.
13 Appendix.
bizhub C652/C652DS/C552/C552DS/C452 13-2 13.1 Colors 13 13 Appendix 13.1 Colors Hue, brightness , and saturation Color has three elements: hue, brightness, and saturation. These are ref erred to as three attributes of colors and all colors are created by combinations these element s.
bizhub C652/C652DS/C552/C552DS/C452 13-3 13.1 Colors 13 What is saturation? What makes the diff erence between the yellow of a lemon and the yellow of a pear? By saying that the lemon is a more vivid .
bizhub C652/C652DS/C552/C552DS/C452 13-4 13.1 Colors 13 Red, green, and blue This machine allows you to adjust re d, green, and blue in 19 levels . Red Green Bule.
bizhub C652/C652DS/C552/C552DS/C452 13-5 13.2 Image quality 13 13.2 Image quality Contrast, copy dens ity, and sharpnes s Contrast: You can finely adjust an image in betwe en soft/smooth and crisp. Copy density: You can finely a djust the shading of an image.
bizhub C652/C652DS/C552/C552DS/C452 13-6 13.2 Image quality 13 Color balance (CMYK) Full-color copy reproduces colors of the original by mi xing toners of four c olors: yellow, magenta, cyan, and black. By chan ging the amount of each of the fou r toners, adjust the tints in the copy.
bizhub C652/C652DS/C552/C552DS/C452 13-7 13.3 Glossary 13 13.3 Glossary The following describes the terms used in Copy mode. Term Description ADF The acronym for automatic 2-si ded document feeder, which automa tically scans originals. (ADF = Automatic document feed er) AE Level Adjustment Function that adjusts the backgr ound of the original.
bizhub C652/C652DS/C552/C552DS/C452 13-8 13.3 Glossary 13 Finishing Preview Function that allows you to check the fini shing status with a preview image be- fore printing. Finishing Program Allows you to select a preset offset or finishing method. Glossy Function that improves the glossy level of an image.
bizhub C652/C652DS/C552/C552DS/C452 13-9 13.3 Glossary 13 Transparency In ter- leave Function that inserts a blank she et between transparency films each time a transparency film is copied. Thi s functio n prevents transpare ncy films from stick- ing together.
14 Index.
bizhub C652/C652DS/C552/C552DS/C452 14-2 14.1 Index by item 14 14 Index 14.1 Index by item Numerics 1st Z-Fold Position Adjustment ........... .............. ........ 7-18 2nd Z-Fold Position Adjustment ............ .............. ..... 7-19 A Access .
bizhub C652/C652DS/C552/C552DS/C452 14-3 14.1 Index by item 14 Erasing non-image areas ....................... .............. ..... 5-42 Expert adjustment ....................... .............. .............. .... 7-9 External server settings ........
bizhub C652/C652DS/C552/C552DS/C452 14-4 14.1 Index by item 14 Original glass cleaner ............... .............. .............. ..... 2-11 Original output tray ........... .............. .............. .............. . 2-7 Original scales ........
bizhub C652/C652DS/C552/C552DS/C452 14-5 14.1 Index by item 14 Tray 2 ................... ............... .............. .............. ............ 2-7 Tray 3 ...................... .............. .............. .............. .......... 2-7 Tray 4 .
bizhub C652/C652DS/C552/C552DS/C452 14-6 14.2 Index by button 14 14.2 Index by button Numerics 1-Sided > 1-Sided ....................... .............. .............. .... 5-8 1-Sided > 2-Sided .......................... .............. .........
bizhub C652/C652DS/C552/C552DS/C452 14-7 14.2 Index by button 14 Copied Paper ................ .............. .............. .............. .. 5-19 Copier Settings .................... .............. ........6-6 , 6-8 , 7-43 Copy ....... .............
bizhub C652/C652DS/C552/C552DS/C452 14-8 14.2 Index by button 14 Image Shift .................... .............. .............. .............. .. 5-38 Image Size ........................ .............. .............. ............. 5-35 Image Stabilization .
bizhub C652/C652DS/C552/C552DS/C452 14-9 14.2 Index by button 14 Power Save Settings ......................... .............. .... 6-3 , 7-3 Preset Stamp .................... .............. .............. ... 5-48 , 5-52 Print .............. .........
bizhub C652/C652DS/C552/C552DS/C4 52 14-10 14.2 Index by button 14 Text Size ............. .............. .............. .............. ............. 5-47 Text/Photo ............... .............. .............. .............. ........ 5-18 Ticket Hold Time Setting .
http://konicaminolta.com Copyright 2009 2009.11 A1DM-9585CO-00.
Ein wichtiger Punkt beim Kauf des Geräts Konica Minolta bizhub C652 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Konica Minolta bizhub C652 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Konica Minolta bizhub C652 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Konica Minolta bizhub C652 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Konica Minolta bizhub C652 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Konica Minolta bizhub C652 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Konica Minolta bizhub C652 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Konica Minolta bizhub C652. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Konica Minolta bizhub C652 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
