Benutzeranleitung / Produktwartung KN-COPD-3-UK des Produzenten Kidde
Zur Seite of 29
AC Powered with Battery Backup Carbon Mono xide Alarm User ’ s Guide with Digital Display , Peak Level Memory , and Battery Backup Model: KN-COPD-3-UK Please have the follo wing information ready wh.
Quick Set Up Guide Introduction • Carbon Monoxide Features • Y our CO alarm • What CO alarms can and cannot do Installation • Where to install your alarm • Where not to install your alarm .
1 IMPORT ANT THIS CARBON MONOXIDE ALARM IS DESIGNED TO DETECT CARBON MONOXIDE GAS FROM ANY SOURCE OF IMPROPER OR MALFUNCTIONING APPLIANCES. IT WILL NOT SENSE SMOKE, FIRE, OR ANY POISONOUS GAS OTHER THAN CAR- BON MONOXIDE.
2 Quick Set Up Guide Listed below are five easy steps for setting up your Kidde CO Alarm. Please read this entire guide for complete information. Note: This CO alarm must be installed by a competent person. Step 1 - Determine the best location for your CO alarm(s).
3 Introduction This Kidde Carbon Monoxide (CO) Alarm is an important part of your family’s home safety plan. Here are some basic facts you should know for your pro- tection and convenience Carbon Monoxide Carbon monoxide is invisible, odourless, tasteless, nonirritating, poisonous gas that is completely undetectable to your senses.
Features Y our CO Alarm The feature that sets this Kidde alarm apart from other alarms is the unique digital display that gives you a continuous readout of CO levels from 30-999 parts per million. The digital display serves as an early warning of CO presence.
Features 5 What Carbon Monoxide Can and Cannot Do This unit is designed to sense certain levels of CO from malfunctioning furnaces, appliances, gas engines or other sources. This unit will pro- vide early warning of the presence of carbon monoxide, usually before a healthy adult would experience symptoms.
Installation 6 Mounting Configuration LOCA TION Y our Kidde CO Alarm should be mounted in or near bedrooms and liv- ing areas or wherever you suspect a CO exposure to be likely . It is rec- ommended that you install a Kidde CO Alarm on each level of a multi- level home.
Do not install this alarm to a switch- or dimmer-controlled outlet if pos- sible. Do not install in areas where the temperature is colder than 4.4°C (40°F) or hotter than 37.8°C (100°F). These areas include uncondi- tioned crawl spaces, attics, porches and garages.
Direct Plug Alarm In its “as shipped” configuration, your Kidde CO Alarm is ready to be plugged directly into a wall-mains socket. T o install: 1.) Choose a standard unswitched 230V electrical outlet to plug the alarm into. 2.) Plug the alarm in. Note: Do not cover the alarm with a curtain or other obstruction.
8. Hook the keyhole in the back cover over the screw head before or after replacing the back cover on the unit. 9. Plug the adapter into an unswitched wall socket.
Low Battery W arning If the 9 volt battery is missing, or if the battery’s power is low , an “Lb” message will display which blinks alternately with the current CO read- ing every second.
Normal Operation 11 While on AC power , in the event of a CO incident, the alarm pattern will continue to repeat as long as CO is present. NOTE: Pressing the T est/Reset button tests the functions of the alarm’s internal components, circuitry and micro-computer .
If your alarm sounder is beeping, and you are not sure if it is a CO alarm or a malfunction alert, reset the alarm, open windows for ventila- tion and evacuate the premises immediately . Then call the Kidde Freephone Customer Hotline at 0800 917 0722 for assistance.
The Peak Level Memory Button When the Peak button is pressed the unit will display the highest CO concentration measured since the peak memory was last reset or the unit was powered. Levels between 1 1 and 999-ppm will be display although the unit does not display values below 30-ppm during normal operation.
Where CO Comes From Inside your home, fuel burning appliances used for heating and cook- ing are the most likely sources of CO. V ehicles running in attached garages can also produce dangerous levels of carbon monoxide.
• Have the heating system, vents, chimney and flue inspected and cleaned by a qualified technician every year . • Follow manufacturer ’ s directions for safe operation of all fuel- burning appliances. • Examine vents and chimneys regularly for improper connections, visible rust or stains.
Hidden Causes of CO Emission • Internal appliance damage or malfunctioning components • Improper burner adjustment • Hidden blockage or damage in chimneys Determine if anyone in the household is.
Anyone in the household who is elderly , has anemia, heart disease, respiratory problems, emphysema, or chronic bronchitis, is at a higher risk of CO poisoning and health problems from exposure to CO. If any- one in the household is at high risk for CO poisoning, we urge you to take extra precaution to prevent possible poisoning.
What to Do When the Alarm Sounds for Carbon Monoxide Determine if anyone in the household is experiencing symp- toms of CO poisoning. Many cases of reported CO poisoning indicate that while victims are aware they are not well, they become so disoriented they are unable to save themselves by either exiting the building or calling for assistance.
Note any combustion equipment not inspected by the techni- cian and consult the manufacturer ’ s instructions, or contact the manufacturer directly , for more information about CO safety and this equipment. Make sure that motor vehicles are not, and have not been, operating in an attached garage or adjacent to the residence.
Call a Qualified T echnician to Find and Repair the Problem Call a qualified service technician (such as a licensed heating contractor , utility service technician or fuel provider) to inspect your home for possible sources of CO leak. Do not restart these appliances until the problem is corrected.
T echnical Infor mation 21 Product Specifications Power: 230V AC units: 50 Hz, Current 120 mA max. Sensor: CO sensor calibrated at 150 ppm (± 25 ppm). T emperature: Operating range: 40˚F (4.4˚C) to 100˚F (37.8˚C). Mounting: Accessories supplied for wall mount or direct plug applications.
How the Unit Determines When to Alarm Y our Kidde alarm uses advanced technology to monitor the environ- ment in your home and warn you of certain levels of CO. An internal microcomputer works together with the sensors inside the alarm to determine the levels of CO in the air .
The following tables contain vital information about the vari- ous readings you may see on your display . We suggest you keep this User ’ s Guide handy for reference. Y our new Kidde Carbon Monoxide Alarm is a sophisticated electronic device – yet very simple to understand.
Display Readings 24 Readings Y ou May See When Unit is AC Powered Readings Y ou May See When Unit is on T emporar y Batter y Backup Display Shows Alarm Sound Unit Status Recommended Action Steady “E.
W ARRANTY COVERAGE: THE MANUF ACTURER WAR- RANTS TO THE ORIGINAL CONSUMER PURCHASER, THA T THIS PRODUCT WILL BE FREE OF DEFECTS IN MA TERIAL AND WORKMANSHIP FOR A PERIOD OF FIVE (5) YEARS FROM DA TE OF PURCHASE EXCLUDING THE BA TTERY . THE MANUFACTURER’S LIABILITY HEREUNDER IS LIMITED T O REPLACEMENT OF THE PRODUCT .
Monoxide Alarm is not a substitute for property , disability , life, or other insurance of any kind. Appropriate insurance coverage is your responsibility .
QUESTIONS OR FOR MORE INFORMA TION Call our Kidde customer service department on 01753 685148 or contact us at our website at www.kiddesafetyeurope.co.uk Kidde Safety Europe Mathisen Way , Colnbrook, SL3 0HB, UK. ©Copyright Walter Kidde Portable Equipment 2005.
Ein wichtiger Punkt beim Kauf des Geräts Kidde KN-COPD-3-UK (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Kidde KN-COPD-3-UK noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Kidde KN-COPD-3-UK - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Kidde KN-COPD-3-UK reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Kidde KN-COPD-3-UK erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Kidde KN-COPD-3-UK besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Kidde KN-COPD-3-UK verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Kidde KN-COPD-3-UK. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Kidde KN-COPD-3-UK gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
