Benutzeranleitung / Produktwartung QRT-301 des Produzenten Kguard
Zur Seite of 45
QRT-301 U ser's Manual Da y & Night WI-FI Netw ork Camera W eb Client user name: admin W eb Client default password: admin P2P user name: admin P2P default password: 123456.
2 WI-FI Network Camer a User ’ s Manual Intr oducon Fea tures .................................................. 4 P ackage Con tents ................................... 4 Product Ov erview ................................... 5 Connecon Diagr am .
WI-FI Network Camer a User ’ s Manual 3 Saf ety Inf ormaon W arning This is the symbol f or indicang any pot enal hazard, risk or condion requiring special a enon. The user needs to re fer to the import ant operang and maintenance or servicing instrucons.
4 WI-FI Network Camer a User ’ s Manual Thank you f or choosing our Wi-Fi Network Camera. The QR T -301 featur es an easy-t o-congure network in terface, allowing you to access the c amera on your mobile/pad an ywhere at an y me.
WI-FI Network Camer a User ’ s Manual 5 Introduction Pr oduct Overview WiFi Antenna QR Code Label Lens Status LED (r ed).
6 WI-FI Network Camer a User ’ s Manual Introduction Connecon Diagr am LOCK DC IN 1 2 3 4W PS RESE T Internet *Pin T ool Sensor In Alarm Out SD Card Electrical Outlet Speak er Microphone LAN Port.
WI-FI Network Camer a User ’ s Manual 7 Netw ork Congur aon Procedur es of Network Congura on depend on the type of Router/Modem you ar e using.
8 WI-FI Network Camer a User ’ s Manual Making Connections 4. When the red s tatus LED (see “Product Overview” on page 5 ) turns o , wait for 10 seconds un l the Camera boots up and s tarts rota ng. NOTE: When the r ed status LED s tarts blinking with a second interval, it means the wir eless network connecon is successful.
WI-FI Network Camer a User ’ s Manual 9 Making Connections 4. Insert the CD (supplied) to your PC’ s CD drive. Click on Search IP . 5. The progr am lists the camer a by IP address. Double-click on the camer a’ s IP address eld. The camer a’ s web client opens in your PC’ s default w eb browser .
10 WI-FI Network Camer a User ’ s Manual Making Connections 10. Click on the router name and modify the f ollowing. • Check Using Wireless LAN opon. • Enter the wir eless router ’ s password in Ke y eld. 11. Click Save . 12. Disconnect the RJ45 Etherne t cable from the camer a.
WI-FI Network Camer a User ’ s Manual 11 Making Connections Wired R out er/Modem If you are using a wir ed router/modem, c onrm the type of internet connecon y ou are using and the related ne twork connecon par ameters with y our Internet Service Provider (ISP), t o complete the setup.
12 WI-FI Network Camer a User ’ s Manual Making Connections 4. Insert the CD (supplied) to your PC’ s CD drive. Click on Search IP . 5. The progr am lists the camer a by IP address. Double-click on the camer a’ s IP address eld. The camer a’ s web client opens in your PC’ s default w eb browser .
WI-FI Network Camer a User ’ s Manual 13 Making Connections Sta c IP and PPPoE T o establish a connecon from the c amera to the wir ed router or modem with a st ac IP or PPPoE, perf orm the following: 1. Connect the camer a to the power sock et, using the power adapter .
14 WI-FI Network Camer a User ’ s Manual Making Connections 5. On Network and Sharing Cent er click Local Area Connecon Status > De tails and write down the network parame ters (IP Address, Subne t Mask, Gatewa y , and DNS Ser v ers). 6. Insert the CD (supplied) to your PC’ s CD drive.
WI-FI Network Camer a User ’ s Manual 15 Making Connections • Enter the user name and pass word. NOTE: The de fault user name and passwor d are “ admin” . 9. Click OK . 10. W ait for a minute un l the camera’ s IP address is list ed on the screen.
16 WI-FI Network Camer a User ’ s Manual Making Connections 15. On Network scr een, do the following modicaons: • Depending on the Internet c onnecon you are using, select Stac Addr ess or PPPoE as the network type. • Do the necessary modicaons to the netw ork paramet ers.
WI-FI Network Camer a User ’ s Manual 17 Making Connections When the network connecon t o the camera is comple te, use the methods described in this secon to st art reviewing the remote liv e view .
18 WI-FI Network Camer a User ’ s Manual Making Connections 5. Do the following: iOS devices: a) Enter the de fault camer a password: “ 123456” . b) T ap OK . c) Change the device name if necessary . d) T ap Save . Android devices: a) Enter the de fault camer a password: “ 123456” and change the device name if necessary .
WI-FI Network Camer a User ’ s Manual 19 Making Connections b) T ap OK . 6. On Devices screen, t ap camera to s tart viewing the live video fr om the camera.
20 WI-FI Network Camer a User ’ s Manual Making Connections T o access remotely your camer a from a PC, f ollow the steps: 1. Insert the CD (supplied) to your PC’ s CD drive. 2. Click on PC Setup . 3. Follow the on-scr een instrucons and install the applica on on your PC.
WI-FI Network Camer a User ’ s Manual 21 Making Connections Follow the instrucons in this secon t o install the camer a and perform the cable connecons.
22 WI-FI Network Camer a User ’ s Manual Use W eb Client to remot ely access the Camera and congur e the sengs of Camera. Bef ore accessing W eb Client for r st me: • Ensure that the Ne twork sengs of the Camera is pr operly congured.
WI-FI Network Camer a User ’ s Manual 23 W eb Client OR Open your comput er web browser and en ter the domain name you set f or the camera or the designat ed DDNS address in the URL bo x. Y ou can nd the designated DDNS address on the s cker or > DDNS > DDNS Hostname .
24 WI-FI Network Camer a User ’ s Manual W eb Client T ask Bar T o access the common funcons, click the respecve icon shown on the t ask bar . • Click t o pla y the live video. • Click to st op the live video. • Click to tak e a snapshot.
WI-FI Network Camer a User ’ s Manual 25 W eb Client Right P anel Contr ol Y ou can use the Panel Con trol to access the PTZ Contr ol panel and customiz e the display sengs. Click the direcon arr ow to select the direcon of the PTZ camer a.
26 WI-FI Network Camer a User ’ s Manual W eb Client Congur e the Camera Se ngs Click tab to remot ely congure the Camer a. NOTE: When all sengs are c omplete, do the following: • Click Save t o save all the sengs. • Click Update t o refresh the se ngs.
WI-FI Network Camer a User ’ s Manual 27 W eb Client Device View the Camer a informaon including the device ID , Client ver sion, and Host version, IP addr ess, UPnP status, and DDNS sta tus. The def ault device name is “IP CAMERA” . T o customiz e the camera name, en ter the new name in Descripon .
28 WI-FI Network Camer a User ’ s Manual W eb Client Frame Ra te : Select the video stream fr ame rat e. Bit Rate: Select the video s tream bit ra te. NOTE: Higher bit r ate pr oduce beer quality images, but occupy mor e bandwidth. Image Quality: Select the video str eam quality .
WI-FI Network Camer a User ’ s Manual 29 W eb Client Linkage With Alarm: Check this bo x to acva te the following acon when the moon is det ected. • Alarm Output: Check this opon to enable alarm output. See “ Alarm” on page 29 . • SD-Card R ecord: Check this opon to sav e the recorded videos dir ectly into the SD car d.
30 WI-FI Network Camer a User ’ s Manual W eb Client Alarm Dura on : Set the external alarm output dur aon. Lose SD-Card Alarm: Select on to aut omacally trigger the alarm if the Camera c annot detect the memory card. Alarm Input1: Check the Enable box t o enable alarm input.
WI-FI Network Camer a User ’ s Manual 31 W eb Client • DHCP: Select this connecon if your camer a is connected t o a router and DHCP is enabled. Media Port : En ter the port number that the device will use to send Camer a command and video stream.
32 WI-FI Network Camer a User ’ s Manual W eb Client Wireless Lan Congure wir eless network sengs. Search : Click to sear ch for a vailable wireless rout er(s). Using Wireless Lan: Check the bo x to use Wi-Fi funcon. SSID: Enter the r outer name.
WI-FI Network Camer a User ’ s Manual 33 W eb Client DDNS DDNS (Dynamic DNS) is a service that regist ers a domain name and the oang IP address with a DDNS server so tha t the domain name can be rout ed to the IP address even if the IP is chang ed in a dynamic IP syst em.
34 WI-FI Network Camer a User ’ s Manual W eb Client Name : Enter the cruise name. Status: Check t o enable the current cruise mode. Serial Number: Check the box t o acvate the select ed preset mode. Preset: Select the pr eset point that you ha ve set with Right P anel Control.
WI-FI Network Camer a User ’ s Manual 35 W eb Client Congure Other User s Y ou can specify up to 9 users. Only the Super adminis trator ( Super Admin ) c an create an acc ount and grant access rights to user s. T o create a new user , enter the user name and passw ord.
36 WI-FI Network Camer a User ’ s Manual W eb Client Dat e & Time Congure the da te and me sengs. Date me : Display the current da te and me. Time Zone Se ngs: Select the me zone in your loca on. Timing Mode: Select the me mode.
WI-FI Network Camer a User ’ s Manual 37 W eb Client SMTP Port: En ter the SMTP port of the sending email server . Auth User: Check the box t o verify the user sengs. SMTP User: Enter the user name of the sender . SMTP Passw ord: Enter the passw ord of the sender .
38 WI-FI Network Camer a User ’ s Manual W eb Client SD Card Manage the memory car d and congure the rec ording sengs to be st ored in the memory card. Device Name : Display the name of the memory c ard. T otal Size: Display the t otal size of the memory car d.
WI-FI Network Camer a User ’ s Manual 39 W eb Client P2P Sengs P2P passwor d is the password that y ou enter aer y ou have complet e scanning the QR code or manually entering the GUID via portable device/ computer . Def ault is 123456. We sugges t you change the passwor d to protect y our privacy .
40 WI-FI Network Camer a User ’ s Manual W eb Client Syste m Reboot the Camer a, load factory def aults, or update the rmw are and W eb UI sengs. Reboot Device : Click t o reboot the Camera. Res tore F actory Sengs: Click to res tore all parame ters to the f actory default se ngs.
WI-FI Network Camer a User ’ s Manual 41 W eb Client Pla yback Click tab to sear ch and play the recor ded les stored in the memory car d. Searching and Pla ying Videos Click to search the video. A sear ch window appears. Search Mode: Specify the search mode.
42 WI-FI Network Camer a User ’ s Manual W eb Client Double-click the le that you w ant to play . The playback aut omacally starts. Search results Playback Con trol Click to download the video. Indicat e Moon Detecon video. Click to select the video.
QR Camera User’ s Manual 43 Appendix Specica ons Item Descripon Video Video Compression H.264 Image Fr ame Rate • 1280x720 pix els @30fps • 640x368 pix els @30fps • 320x208 pix els @3.
44 QR Camera User’ s Manual Appendix W eb Client Br owser Compa bility See the following t able for re ference of the W eb Client featur es supported by di erent web br owsers Funcon/Menu O.
KGUARD INFORMA TION CO., L TD. Address: 4F , No.1 13, Jian 2nd Road, Jhonghe District, New T aipei City 23585, T aiwan TEL: +886-2-8228-6080 F AX: +886-2-8221-6857 Email: support@kguardsecurity .com USA T echnical Support Contact TEL: 1-949-450-0052 Email: support@kworldcomputer .
Ein wichtiger Punkt beim Kauf des Geräts Kguard QRT-301 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Kguard QRT-301 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Kguard QRT-301 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Kguard QRT-301 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Kguard QRT-301 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Kguard QRT-301 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Kguard QRT-301 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Kguard QRT-301. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Kguard QRT-301 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
