Benutzeranleitung / Produktwartung ProTalk XLS TK-3130 des Produzenten Kenwood
Zur Seite of 48
© B62-1486-20 (K) 09 08 07 06 05 04 03 02 UHF FM TRANSCEIVER TK-3130 INSTRUCTION MANUAL.
T HANK Y OU We are grateful for your purchase of this KENWOOD product and welcome you to the Business Radio Service (BRS). Y our KENWOOD 2-way Business Radio is called a “transceiver”, meaning “transmitter & receiver”. We believe this easy-to-use transceiver will provide you with dependable and reliable communications.
i FCC L ICENSE I NFORMA TION Y our KENWOOD radio operates on communications frequencies which are subject to FCC (Federal Communications Commission) Rules & Regulations. FCC Rules require that all operators using Private Land Mobile radio frequencies obtain a radio license before operating their equipment.
ii P RECAUTIONS • Refer service to qualified technicians only . Do not modify or attempt to adjust the transceiver for any reason. • Do not expose the transceiver to long periods of direct sunlight, nor place it close to heating appliances. • Do not place the transceiver in excessively dusty , humid, or wet areas, nor on unstable surfaces.
iii CONTENTS UNP ACKING AND CHECKING EQUIPMENT ......................... 1 S UPPLIED A CCESSORIES .......................................................... 1 ORIENT A TION .......................................................................... 2 D ISPLA Y .
iv C ALLING A LERT T ONES ......................................................... 29 I NCOMING C ALL N OTIFICATION T YPE ........................................ 30 B USY C HANNEL L OCKOUT ...................................................... 32 T RANSCEIVER B EEP .
1 UNP ACKING AND CHECKING EQUIPMENT Carefully unpack the transceiver . W e recommend you identify the items listed in the following table before discarding the packing material. If any items are missing or have been damaged during shipment, file a claim with the carrier immediately .
2 ORIENT A TION Antenna P o wer s wit c h/ V olume contr ol T u r n clo c kwise to s witch the p o w er ON and counter- clo c kwise to s witch the p o w er OF F . Rotate to adjust the volume . MENU key Press to per f o r m v a r ious function s . Press and hold while s witching the power ON to enter Setting Mode.
3 D ISPLA Y n o c I n o i t p i r c s e D . d e t a v i t c a s i X O V n e h w s r a e p p A n o i s s i m s n a r t w o l g n i s u n e h w s r a e p p A . r e w o p a h t i w p u t e s s i l e n n a h c e h t n e h w s r a e p p A . e d o c T Q D .
4 PREP ARA TION I NST ALLING / R EMOVING THE B A TTER Y P ACK The battery pack is not charged at the factory; charge it before use (pages 6 and 7). A verage battery pack life using low power: 12 hours A verage battery pack life using high power: 10 hours •A verage times are calculated using 5% transmit time, 5% receive time, and 90% standby time.
5 I NST ALLING / R EMOVING B A TTERIES In place of the battery pack, you can use 3 AA batteries. Use high quality alkaline batteries to enjoy longer periods of battery life.
6 C HARGING THE B A TTERY P ACK Initially charging the battery pack after purchase or extended storage (greater than 2 months) will not bring the battery pack to its normal operating capacity . After repeating the charge/ discharge cycle two or three times, the operating capacity will increase to normal.
7 1 Plug the AC adapter cable into the adapter jack located on the rear of the charger . 2 Plug the AC adapter into an AC outlet. 3 Slide a battery pack using the supplied holder or a transceiver equipped with a battery pack into the battery pack slot.
8 I NST ALLING / R EMOVING THE B EL T H OOK If desired, attach the belt hook to the rear of the transceiver using the 2 supplied screws. I NST ALLING / R EMOVING O PTIONAL A CCESSORIES Note: Always switch OFF the transceiver power when installing or removing the optional accessories.
9 GETTING ST ARTED q q q q q Switch the Power ON. Switch the transceiver power ON by turning the Power switch/ V olume control clockwise. •A confirmation tone sounds. To switch the transceiver power OFF , turn the Power switch/ V olume control fully counterclockwise, until a click sounds.
10 • When you receive a call on your selected channel, you will hear audio from the speaker and the LED will light green. •T o use a signalling code, refer to “QUIET T ALK/ DIGIT AL QUIET T ALK” on page 12. Y ou can change the frequency of each channel: 1 T urn the transceiver power OFF .
11 r r r r r Make a Call. 1 Press the MON key to make sure the channel is not in use (refer to page 17). 2 Press and release the CAL key to alert the other parties that you are making a call. •A calling alert tone will sound on the other party’s transceiver .
12 QUIET TALK/ DIGIT AL QUIET TALK QT (Quiet T alk) and DQT (Digital Quiet T alk) are functions that reject signals from undesired parties that are using the same channel as you. Y ou will hear audio from the speaker only when you receive a signal that contains a tone or code matching the one set up on the channel you are using.
13 1 Press the MENU key . • The current setting blinks. 2 Press the ▲ or ▼ key to select your desired value. • The values range from 01 to 38 for QT tones, then proceed to 01 to 83 for DQT codes. When you use a DQT code, the icon appears on the display .
14 SCANNING THE CHANNELS Y ou can scan both channels of the transceiver to search for a signal. When the transceiver verifies a signal on a channel, it proceeds to check whether or not its QT/ DQT setting matches that which is set up on your transceiver , if you have set a channel with QT/ DQT .
15 5 Press the PTT , MON , or CAL key to exit Setting Mode. To begin scanning: 1 Press and hold the ▲ key for 1 second. •“ ” appears on the display . 2 When a signal is detected and the QT/ DQT matches, the channel number appears on the display and blinks.
16 R EVERT C HANNEL The revert channel is the channel from which you start scanning. So, for example, if you are on channel 1 when you begin to scan, your revert channel is channel 1. During scan, pressing the PTT switch will automatically select the transceiver ’s revert channel (in the above example, channel 1) and you will begin transmitting.
17 MONITORING A CHANNEL When no signals are present, the squelch on the transceiver automatically mutes the speaker so you will not hear background noise.
18 VOICE ACTIV A TED CONTROL (VOX) Using the VOX feature, you can operate the transceiver hands-free. In order to use this feature, however , you must use an optional headset; VOX will not function with the built-in microphone.
19 4 Press the MENU key to select “ ” (VOX function is off) or “ ” (VOX gain level 1) to “ ” (VOX gain level 3). • While adjusting the VOX Gain, the LED lights orange. Note: Setting the VOX gain to OFF deactivates VOX. In order to transmit with VOX turned off, you must use the PTT switch.
20 4 Press the MENU key to select “ ” (delay for 100 ms), “ ” (300 ms), “ ” (500 ms), “ ” (1 second), “ ” (1.5 seconds), or “ ” (3 seconds). 5 Press the PTT , MON , or CAL key to exit Setting Mode. VOX O PERA TION 1 Set up a VOX gain level from 1 to 3 (page 18).
21 VOX B USY L OCKOUT While using VOX, you can set the transceiver to detect when the channel is busy (in use). With this function turned on, VOX will not allow you to transmit while the channel is being used. Y ou can transmit only when the channel is free.
22 PRIV ACY TALK Whereas the Quiet T alk and Digital Quiet T alk functions (page 12) allow you to ignore unwanted calls, Privacy T alk allows you to hold a conversation in complete privacy . When activated, any other party listening in on your channel will be unable to understand your conversation.
23 OPERA TING FEA TURES T RANSMISSION P OWER Y ou can adjust the transmission power on all channels. Selecting low power will allow longer use of the battery pack (refer to pages 4 and 5). Selecting high power will allow you to transmit farther , in case the other party is too far away for low power usage.
24 Press and hold the MENU key for 3 seconds to lock or unlock the transceiver keys. • The icon appears on the display when the transceiver keys are locked. No icon appears when they are unlocked. S UPER L OCK Y ou can lock the MENU , CAL , ▲ , and ▼ keys, and disable the Setting Mode.
25 L AMP The lamp is used to illuminate the Liquid Crystal Display . Y ou can set the lamp to remain off, remain on, or turn on when you press any key other than the PTT switch (auto). When set to auto, the lamp remains on for 5 seconds after pressing a key before turning off again.
26 continuously transmit, this feature helps you save on battery power consumption. If you continuously transmit for 3 minutes (default value), the transceiver will stop transmitting and a tone will sound. T o stop the tone, release the PTT switch. Y ou can press the PTT switch again to resume transmitting.
27 B A TTERY S AVE This transceiver has been designed to give you the most out of your battery power . The battery save function decreases the amount of power used when a signal is not being received and no operations are being performed.
28 B A TTERY I NDICA TOR When turned ON, the battery indicator on the display lets you know approximately how much battery life is remaining. When turned OFF , the battery indicator will appear and blink only when the battery voltage level is low .
29 5 Press the PTT , MON , or CAL key to exit Setting Mode. 1 T urn the transceiver power OFF . 2 Press and hold the MENU key while turning the transceiver power ON (for 1 second). 3 Press the ▲ or ▼ key to select “ ”. 4 Press the MENU key to select “ ” (calling alert tone 1) to “ ” (calling alert tone 6).
30 5 Press the PTT , MON , or CAL key to exit Setting Mode. I NCOMING C ALL N OTIFICA TION T YPE Note: To use Incoming Call Notification, you must set up a QT tone or a DQT code (page 12). Incoming Call Notification is used to inform you of when a call is being received.
31 • When set to notify you via both a tone and through vibration (setting 3), the tone is emitted and the transceiver vibrates when a busy signal is received and the QT/ DQT signalling matches. As with a tone only , you will not hear audio from the speaker until the tone is stopped by pressing a key or the 15 second tone stops.
32 B USY C HANNEL L OCKOUT This function is used in order to prevent transmitting on a channel that somebody else is currently using. When turned ON, a beep sounds when you press the PTT switch while another party is using the channel, and you cannot transmit.
33 T RANSCEIVER B EEP When you turn the transceiver power ON or press a key , a beep will emit from the transceiver . If desired, you can turn this feature off: 1 T urn the transceiver power OFF . 2 Press and hold the MENU key while turning the transceiver power ON (for 1 second).
34 RESETTING THE TRANSCEIVER At some point in time, you may desire to reset the transceiver settings to their default values. The default values of all the menus and channel settings can be found on page 41. To reset the transceiver: 1 T urn the transceiver power OFF .
35 OPTIONAL ACCESSORIES KNB-27N (Ni-MH battery pack) KSC-28 (Battery charger) KMC-21 (Speaker-microphone) EMC-3 (Clip mic with earphone) KHS-1 (Headset) KHS-21 (Headset) PTT SENS.
36 NOTICES TO THE USER This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
37 SAFETY INFORMA TION: Y our wireless hand-held portable transceiver has been designed using a low power transmitter . When the PTT switch is pressed, the transceiver generates radio frequency (RF) electromagnetic energy (EME). This transceiver is designed to comply with the FCC Report and Order FCC 96-326 (August, 1996).
38 y a l p s i D r e b m u N k l a T t e i u Q y c n e u q e r F y a l p s i D r e b m u N k l a T t e i u Q y c n e u q e r F y a l p s i D r e b m u N k l a T t e i u Q y c n e u q e r F F OF F O3 1z H 5 . 3 0 16 2z H 2 . 2 6 1 1 0z H 0 . 7 64 1z H 2 .
39 y a l p s i D r e b m u N l a t i g i D k l a T t e i u Q e d o C y a l p s i D r e b m u N l a t i g i D k l a T t e i u Q e d o C y a l p s i D r e b m u N l a t i g i D k l a T t e i u Q e d o C.
40 y c n e u q e r F r e b m u N e v i e c e R / t i m s n a r T y c n e u q e r F e d o C / r o l o C 1 Fz H M 0 0 0 5 . 4 6 4n w o r B 2 Fz H M 0 0 5 5 . 4 6 4w o l l e Y 3 Fz H M 5 2 6 7 . 7 6 4J 4 Fz H M 5 2 1 8 . 7 6 4K 5 Fz H M 0 0 5 8 . 7 6 4r a t S r e v l i S 6 Fz H M 0 5 7 8 .
41 . o N y a l p s i D e m a N e m a N l l u F s g n i t t e S t l u a f e D g n i t t e S . f e R e g a P 1 1 l e n n a h C g n i t t e S y c n e u q e r F 8 F o t 1 F2 F0 1 2 2 l e n n a h C g n i t.
42 m e l b o r P n o i t u l o S e h t n r u t t o n n a C r e w o p r e v i e c s n a r t . N O • • y a m k c a p y r e t t a b r o s e i r e t t a b e h T r o s e i r e t t a b e h t e c a l p e R . d a e d e b . k c a p y r e t t a b e h t e c a l p e r r o e g r a h c e r e b t o n y a m k c a p y r e t t a b e h T e h t e v o m e R .
Ein wichtiger Punkt beim Kauf des Geräts Kenwood ProTalk XLS TK-3130 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Kenwood ProTalk XLS TK-3130 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Kenwood ProTalk XLS TK-3130 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Kenwood ProTalk XLS TK-3130 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Kenwood ProTalk XLS TK-3130 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Kenwood ProTalk XLS TK-3130 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Kenwood ProTalk XLS TK-3130 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Kenwood ProTalk XLS TK-3130. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Kenwood ProTalk XLS TK-3130 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
