Benutzeranleitung / Produktwartung Washer des Produzenten Kenmore
Zur Seite of 31
Owner's Manual and Installation Instructions ® One-Speed AUTOMATIC WASHERS with Water Temperature Control IMPORTANT: Read and follow all safety and operating instructions before first use of this product. Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.
BEFORE USING YOUR NEW WASHER 2 KENMORE AUTOMATIC WASHER WARRANTY 3 WASHER SAFETY ............ 4 INSTALLATION REQUIREMENTS _ 6 INSTALLATION INSTRUCTIONS 10 OPERATING YOUR WASHER ..... 14 LAUNDRY TIPS ........... 22 CARING FOR YOUR WASHER _ _ _ 24 TROUBLESHOOTING 25 SEARS MAINTENANCE AGREEMENT 29 Please read this manual.
Limited Lifetime Warranty on White Porcelain Basket For the lifetime of the washer from the date of purchase, Sears will replace the white porcelain wash basket if it chips or rusts due to defective material or workmanship, After the first year, you will be charged for labor.
Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance, Always read and obey all safety messages, This is the safety alert symbol, This symbol alerts you to potential hazards that can kill or hurt you and others.
IMPORTANT SAFETY INSTRUCTIONS WARNING: To reduce the risk of fire, electric shock, or injury to persons when using your washer, follow basic precautions, including the following: • Read all instructions before using the washer.
Tools and Parts Assemble the necessary tools and supplies before beginning the washer installation. The parts supplied are in the washer basket. Tools needed for connecting the drain hose and water inlet hoses: • Pliers that open to 1%_in. (3.95 cm) • Flashlight (optional) Parts supplied: 3 4 5 1.
Location Requirements Selecting the proper location for your washer improves performance and mini- mizes noise and possible washer "walk." Your washer can be installed in a base- ment, laundry room, closet, or recessed area. (See "Drain System.
Drain System The washer can be installed using the standpipe drain system (floor or wall), the laundry tub drain system, or the floor drain system. Select the drain hose instal- lation method you need.
• To minimize possible shock hazard, the cord must be plugged into a mating, 3 prong, ground4ype outlet, grounded in accordance with local codes and ordi- nances. If a mating outlet is not avail- able, itis the personal responsibility and obligation of the customer tohave the properly grounded outlet installed by a qualified electrician.
Before You Start 3. Cut the shipping strap about 16 in, (40 cm) from plug end. Look for the words "CUT HERE." Discard end with the cotter pins. Slide remainder of shipping strap from the power cord. You will use the remainder of the shipping strap later to secure the drain hose.
4, Open clamp. Twist hose back and forth while pushing down onto drain connector at the bottom of the wash- er, Continue until hose contacts the ribbed stop on the cabinet. Y 5, Place clamp over area marked "CLAMR" Release clamp. 1/4" 1.
12 Clear the water lines 5, Run water through both faucets and inlet hoses, into a bucket or laundry tub, to get rid of particles in the water lines that might clog the inlet valve screens. Connect the inlet hoses to the washer 6, Attach the hose with the red coupling to the HOT (bottom) inlet valve.
4. Tilt the washer back and remove the 3. wood block, Gently lower the washer tothe floor. 4. 5. Slide tofinal location. 6. Check the levelness ofthe washer by placing a level onthe top edges ofthe washer; first side-to-side, then front4o-back, 5. 6. 7.
To get the maximum cleaning and fabric care from your washer, please read and follow these instructions. NOTE: The drawings in this section show the basic features of all models covered by this manual. Refer to the supplied "Feature Sheet" for your washer's particu- lar features.
LID INSTRUCTIONS These instructions are found under the lid of your washen "O]'J.,'i_rIIAY[_'.ILrf, f¢_,,_'.JI[OIkV! Add measured detergent to the washer basket. Make the selections for these washer controls. 1. SELECT & ADJUST • WATER LEVEL Adjust to load size.
STARTING YOUR WASHER STEP 1. Add measured detergent directly into washer basket, Then place a load of sorted clothes in the washer. STEP 2, Close washer lid. STEP 3. Set WATER LEVEL Control O based on the size of your wash load. STEP 4. Set the WATER TEMPERATURE Control O.
SET WATER LEVEL CONTROL This control gives you the flexibility to save water when washing small loads. Your washer lets you select a water setting based on the size of your wash load. SET WATER TEMPERATURE CONTROL Your washer lets you select a wash water setting based on the type of load you are washing.
SETTING YOUR CYCLE PERMANENT PRESS SELECTOR (TIMER) CONTROL • For sturdy or heavily soiled loads, use SUPER, • For moderately soiled loads, use REGULAR, • For delicate or lightly soiled loads, use SHORT. HEAVY DUTY Use this cycle to get up to 14 minutes of wash time, Wash combines fast speed agitation and fast spin speeds.
RINSE AND SPIN When using extra detergent for heavily soiled clothes, or washing special-care items, you may find an extra rinse and spin is needed. STEP 1. Set WATER LEVEL Control. STEP 2. Set WATER TEMPERATURE Control. STEP 3. Set the Cycle Selector Control (Timer) knob to a RINSE setting.
UNDERSTANDING WHAT HAPPENS IN EACH CYCLE PERMANENT PRESS HEAVY DUTY Fill to _ Fill to select; level selected level Wash • selected time Wash • selected time Partial Drain • • _ Drain - no spin.
DUAL ACTION ® AGITATOR The Kenmore DUAL ACTION ® Agitator gives you flexible fabric care for even your largest loads. The best cleaning action in your washer takes place at the bottom where the agi- tator vanes move back and forth to flex the fabric, loosen- ing the soil.
PREPARING CLOTHES FOR WASHING i-lu-vum" "I_ i[:4 i"[, Follow these recommendations to help you prolong the life of your garments. • Close zippers, snaps, and hooks to avoid snagging other items, Remove pins, buckles, and other hard objects to avoid scratching the washer interior.
LOADING ° Reduce wash time by using a lower water level setting. Loads with only a few small items need less wash time. Proper loading of your washer con- tributes to proper cleaning and fabric care and reduces machine noise. • Drop items into washer loosely.
CLEANING YOUR WASHER Exterior Wipe up detergent, bleach, and other spills with a soft, damp cloth or sponge as they occur. Occasionally wipe the outside of the washer to keep it looking like new. Do not put sharp or metal objects in your washer. They can damage the finish.
Most laundering problems are easily solved if you understand the cause. Check these lists for common laundry and washer problems. If you need further assistance, see the back cover, Problem Possible Cause Solution Washer Leaks Household plumbing isIeaking.
Problem Possible Cause Solution Won't Drain/ Low voltage or using Check electrical source or call Won't Spin/ an extension cord. electrician. Do not use extension Wet Loads cords. (cont.) Cold rinses. Cold rinses leave loads wetter than warm rinses.
Problem Possible Cause Solution Machine Power cord not plugged in. Plug into a grounded 3 prong outlet. Stops No power at plug. Check electrical source or call electrician. Fuse blown or circuit Replace fuse or reset circuit breaker. breaker open. If problem continues, call electrician.
Problem Possible Cause Solution Tearing Overloading. Improper Loads should move freely during use of washer, wash. Wash smaller loads or increase water level, Improper use of chlorine Do not pour chlorine bleach directly bleach, Undiluted bleach on load.
WE SERVICE WHAT WE SELL Your purchase has added value because you can depend on Sears Home Central _, for service. With over 12,000 trained repair specialists and access to over 4.2 million parts and accessories, we have the tools, parts, knowledge and skills to ensure our pledge: We Service What We Sell.
30.
1-800-4-MY-HOME ® For repair of carry-in products like vacuums, lawn equipment, and electronics, call for _le Ioca_n of your nearest Sears Parts and RepairCenter.
Ein wichtiger Punkt beim Kauf des Geräts Kenmore Washer (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Kenmore Washer noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Kenmore Washer - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Kenmore Washer reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Kenmore Washer erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Kenmore Washer besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Kenmore Washer verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Kenmore Washer. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Kenmore Washer gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
